mirror of
https://github.com/nophead/Mendel90.git
synced 2025-01-17 04:48:15 +01:00
2f70825078
Nut traps moved further from the edge of most parts. Fixed ribbon clamp slots too deep. Modified for JHeadMK5. Changed bed thermsitor type. Extruder block is now thinner so it can protrude below the carriage. The idler bolts no go the other way round so the nuts are captive instead of the heads. 60 mm carriage fan. Spool holders now have tabs for nut traps instead of P clip. Belt lengths corrected and rounded to tooth pitch. Metal pulleys modelled. exploded variable now 0/1 instead of boolean. Dibond version now has mouse holes for wires and the Y wires run underneath the base. Added jigs for inserting Jhead and drilling tubes. Hobbed bolt not shows hob position on the BOM. Everything in the kit is now in the model and so appears on the BOM. Added ribbon cable, wire, heat shrink sleeving, foam spunge, PLA sample. Completed the kit build manual. Sub assemblies restructured to reflect the build order. View files added to make the assembly diagrams. Fixed sheets.py not working first time run.
22 lines
523 B
Plaintext
22 lines
523 B
Plaintext
psu_assembly:
|
|
Vitamins:
|
|
1 THS15 Aluminium clad resistor 10R
|
|
1 THS15 Aluminium clad resistor 4R7
|
|
1 PSU e.g. ALPINE500
|
|
1 IEC mains lead
|
|
4 M2.5 pan screw x 12mm
|
|
4 M4 pan screw x 12mm
|
|
2 6-32 pan screw x 9.5mm
|
|
1 Heatshrink sleeving ID 10mm x 15mm
|
|
3 Heatshrink sleeving ID 2.4mm x 15mm
|
|
5 Heatshrink sleeving ID 3.2mm x 15mm
|
|
2 Heatshrink sleeving ID 6.4mm x 15mm
|
|
6 Washer M4 x 9mm x 0.8mm
|
|
6 Star washer M4 x 0.8mm
|
|
2 Ziptie 100mm min length
|
|
|
|
Printed:
|
|
1 atx_long_bracket.stl
|
|
1 atx_short_bracket.stl
|
|
|