Added axial diodes, radial transistors, discs and modules.

Verboard and perboard components get solder menisci added automatically.
Radial leads now made by bezier curves rather than straights and arcs.

examples/EnviroPlus/bom/bom.csv

@@ -1,6 +1,6 @@
 'Micro SD card',  1
 'Fan 17mm x 8mm',  1
-'Heatfit insert M2',  4
+'Heatfit insert M2 x 4mm',  4
 'Nut M2.5 x 2.2mm nyloc',  4
 'Enviro+',  1
 'Raspberry Pi Zero',  1
@@ -13,7 +13,7 @@
 'SMD capacitor 1206 10uF',  1
 'SMD resistor 0805 3K3 0.125W',  1
 'SOT223 package FZT851',  1
-'Veroboard 6 holes x 6strips',  1
+'Veroboard 6 holes x 6 strips',  1
 'Washer  M2 x 5mm x 0.3mm',  4
 'Washer  M2.5 x 5.9mm x 0.5mm',  4
 'Washer  M3 x 7mm x 0.5mm',  3

examples/EnviroPlus/bom/bom.json

@@ -55,7 +55,7 @@
         "count": 1,
         "assemblies": {},
         "vitamins": {
-            "veroboard(fan_vb): Veroboard 6 holes x 6strips": {
+            "veroboard(fan_vb): Veroboard 6 holes x 6 strips": {
                 "count": 1
             },
             "wire_link(0.8, 10.16, tail = 2.5): Wire link 0.8mm x 0.4\"": {
@@ -102,7 +102,7 @@
         "count": 1,
         "assemblies": {},
         "vitamins": {
-            "insert(F1BM2): Heatfit insert M2": {
+            "insert(F1BM2): Heatfit insert M2 x 4mm": {
                 "count": 4
             },
             "washer(M3_washer): Washer  M3 x 7mm x 0.5mm": {

examples/EnviroPlus/bom/bom.txt

@@ -15,7 +15,7 @@ Vitamins:
  i  e  k  e  o  e  r  n
  1|  |  |  |  |  |  |  |  1 Micro SD card
   |  | 1|  |  |  |  |  |  1 Fan 17mm x 8mm
-  |  |  | 4|  |  |  |  |  4 Heatfit insert M2
+  |  |  | 4|  |  |  |  |  4 Heatfit insert M2 x 4mm
   |  |  |  |  | 4|  |  |  4 Nut M2.5 x 2.2mm nyloc
   |  |  |  | 1|  |  |  |  1 Enviro+
  1|  |  |  |  |  |  |  |  1 Raspberry Pi Zero
@@ -28,7 +28,7 @@ Vitamins:
   |  |  |  |  |  | 1|  |  1 SMD capacitor 1206 10uF
   |  |  |  |  |  | 1|  |  1 SMD resistor 0805 3K3 0.125W
   |  |  |  |  |  | 1|  |  1 SOT223 package FZT851
-  |  |  |  |  |  | 1|  |  1 Veroboard 6 holes x 6strips
+  |  |  |  |  |  | 1|  |  1 Veroboard 6 holes x 6 strips
   |  |  |  |  |  |  | 4|  4 Washer  M2 x 5mm x 0.3mm
   |  |  |  |  | 4|  |  |  4 Washer  M2.5 x 5.9mm x 0.5mm
   |  |  | 3|  |  |  |  |  3 Washer  M3 x 7mm x 0.5mm

examples/EnviroPlus/bom/case_assembly.txt

@@ -1,6 +1,6 @@
 case_assembly:
 Vitamins:
-  4 Heatfit insert M2
+  4 Heatfit insert M2 x 4mm
   3 Screw M3 pan x  6mm
   3 Washer  M3 x 7mm x 0.5mm
 

examples/EnviroPlus/bom/fan_controller_assembly.txt

@@ -3,6 +3,6 @@ Vitamins:
   1 SMD capacitor 1206 10uF
   1 SMD resistor 0805 3K3 0.125W
   1 SOT223 package FZT851
-  1 Veroboard 6 holes x 6strips
+  1 Veroboard 6 holes x 6 strips
   3 Wire link 0.8mm x 6.5mm
   1 Wire link 0.8mm x 0.4"

examples/EnviroPlus/readme.md

@@ -29,7 +29,7 @@ Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
 |  |  |  |  |  |  |  |  | | **Vitamins** |
 |   .  |   .  |   .  |   1  |   .  |   .  |   .  |   .  |    1  |    Enviro+ |
 |   1  |   .  |   .  |   .  |   .  |   .  |   .  |   .  |    1  |    Fan 17mm x 8mm |
-|   .  |   .  |   .  |   .  |   4  |   .  |   .  |   .  |    4  |    Heatfit insert M2 |
+|   .  |   .  |   .  |   .  |   4  |   .  |   .  |   .  |    4  |    Heatfit insert M2 x 4mm |
 |   .  |   1  |   .  |   .  |   .  |   .  |   .  |   .  |    1  |    Micro SD card |
 |   .  |   .  |   .  |   .  |   .  |   4  |   .  |   .  |    4  |    Nut M2.5 x 2.2mm nyloc |
 |   1  |   .  |   .  |   .  |   .  |   .  |   .  |   .  |    1  |    PMS5003 particle detector |
@@ -42,7 +42,7 @@ Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
 |   .  |   .  |   .  |   .  |   .  |   .  |   2  |   .  |    2  |    Screw M2.5 pan x  6.4mm |
 |   .  |   .  |   .  |   .  |   .  |   4  |   .  |   .  |    4  |    Screw M2.5 pan x  8mm |
 |   .  |   .  |   .  |   .  |   3  |   .  |   .  |   .  |    3  |    Screw M3 pan x  6mm |
-|   .  |   .  |   1  |   .  |   .  |   .  |   .  |   .  |    1  |    Veroboard 6 holes x 6strips |
+|   .  |   .  |   1  |   .  |   .  |   .  |   .  |   .  |    1  |    Veroboard 6 holes x 6 strips |
 |   .  |   .  |   .  |   .  |   .  |   .  |   .  |   4  |    4  |    Washer  M2 x 5mm x 0.3mm |
 |   .  |   .  |   .  |   .  |   .  |   4  |   .  |   .  |    4  |    Washer  M2.5 x 5.9mm x 0.5mm |
 |   .  |   .  |   .  |   .  |   3  |   .  |   .  |   .  |    3  |    Washer  M3 x 7mm x 0.5mm |
@@ -121,7 +121,7 @@ Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
 |1| SMD capacitor 1206 10uF|
 |1| SMD resistor 0805 3K3 0.125W|
 |1| SOT223 package FZT851|
-|1| Veroboard 6 holes x 6strips|
+|1| Veroboard 6 holes x 6 strips|
 |1| Wire link 0.8mm x 0.4"|
 |3| Wire link 0.8mm x 6.5mm|
 
@@ -183,7 +183,7 @@ It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't
 ### Vitamins
 |Qty|Description|
 |---:|:----------|
-|4| Heatfit insert M2|
+|4| Heatfit insert M2 x 4mm|
 |3| Screw M3 pan x  6mm|
 |3| Washer  M3 x 7mm x 0.5mm|
 

examples/EnviroPlus/scad/fan_controller.scad

@@ -7,7 +7,6 @@
 //
 // Top level model
 //
-
 include <NopSCADlib/core.scad>
 use <NopSCADlib/vitamins/veroboard.scad>
 include <NopSCADlib/vitamins/smds.scad>
@@ -19,10 +18,9 @@ fan_vb = vero("fan_vb", "fan_controller", 6, 6, breaks = [[2, 1], [2 + eps, 5]],
         [0, 1,     0, "link", 0, 4, undef, 2.5],
         [0, 0,     0, "link", 0, 4, undef, 2.5],
         [2, 5,     0, "-smd_res", RES0805, "3K3"],
-        [4, 4.7,  90, "-smd_cap", CAP1206, 1.2, "10uF"],
+        [4, 4.5,  90, "-smd_cap", CAP1206, 1.2, "10uF"],
         [2, 2.5, 180, "-smd_sot", SOT223, "FZT851"],
-    ],
-    joints = [[5, 1], [5, 5], [0, [0, 1, 5]]]
+    ]
  );
 
 //! The fan controller is a single transistor wired as a Miller integrator that effectively multiplies the capacitor value by the gain of the transistor.
@@ -40,6 +38,6 @@ fan_vb = vero("fan_vb", "fan_controller", 6, 6, breaks = [[2, 1], [2 + eps, 5]],
 //!
 //! ![SMT](docs/smt.jpg)
 //!
-module fan_controller_assembly() rotate(90) vflip(!exploded()) veroboard_assembly(fan_vb, -vero_thickness(fan_vb) - 1.4, 0);
+module fan_controller_assembly() rotate(90) vflip() veroboard_fastened_assembly(fan_vb, -vero_thickness(fan_vb) - 1.4, 0);
 
 fan_controller_assembly();

examples/EnviroPlus/scad/main.scad

@@ -25,6 +25,7 @@ include <NopSCADlib/vitamins/fans.scad>
 use <NopSCADlib/vitamins/insert.scad>
 use <NopSCADlib/vitamins/veroboard.scad>
 use <NopSCADlib/utils/round.scad>
+use <NopSCADlib/utils/pcb.scad>
 use <NopSCADlib/printed/foot.scad>
 use <NopSCADlib/printed/printed_box.scad>
 use <fan_controller.scad>
@@ -402,7 +403,7 @@ assembly("enviro") {
     if(!exploded())
         for(x = [8, 7, 3])
             pcb_grid(pcb, x, 0, 0.05)
-                solder_meniscus(pcb, 0.39, 1);
+                solder_meniscus(0.39, 1);
 }
 
 //! * Screw the Enviro+ PCB to the front of the case using M2.5 x 8mm pan screws with washer and nuts on the inside.

examples/MainsBreakOutBox/bom/base_assembly.txt

@@ -1,6 +1,6 @@
 base_assembly:
 Vitamins:
-  2 Heatfit insert M3
+  2 Heatfit insert M3 x 5.8mm
 
 Printed:
   1 socket_box.stl

examples/MainsBreakOutBox/bom/bom.csv

@@ -3,7 +3,7 @@
 'Wire brown 30/0.25mm strands, length 150mm - not shown',  2
 'Wire green & yellow 30/0.25mm strands, length 150mm - not shown',  2
 'IEC inlet for ATX',  1
-'Heatfit insert M3',  2
+'Heatfit insert M3 x 5.8mm',  2
 '4mm shielded jack socket blue',  2
 '4mm shielded jack socket brown',  1
 '4mm shielded jack socket green',  2

examples/MainsBreakOutBox/bom/bom.json

@@ -7,7 +7,7 @@
         "count": 1,
         "assemblies": {},
         "vitamins": {
-            "insert(F1BM3): Heatfit insert M3": {
+            "insert(F1BM3): Heatfit insert M3 x 5.8mm": {
                 "count": 2
             }
         },

examples/MainsBreakOutBox/bom/bom.txt

@@ -12,7 +12,7 @@ Vitamins:
   |  |  | 2|  2 Wire brown 30/0.25mm strands, length 150mm - not shown
   |  | 1| 1|  2 Wire green & yellow 30/0.25mm strands, length 150mm - not shown
   |  |  | 1|  1 IEC inlet for ATX
- 2|  |  |  |  2 Heatfit insert M3
+ 2|  |  |  |  2 Heatfit insert M3 x 5.8mm
   |  | 2|  |  2 4mm shielded jack socket blue
   |  | 1|  |  1 4mm shielded jack socket brown
   |  | 2|  |  2 4mm shielded jack socket green

examples/MainsBreakOutBox/readme.md

@@ -38,7 +38,7 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 |   .  |   .  |   .  |   1  |    1  |    4mm shielded jack socket brown |
 |   .  |   .  |   .  |   2  |    2  |    4mm shielded jack socket green |
 |   .  |   .  |   .  |   3  |    3  |    Ferrule for 1.5mm^2 wire - not shown |
-|   2  |   .  |   .  |   .  |    2  |    Heatfit insert M3 |
+|   2  |   .  |   .  |   .  |    2  |    Heatfit insert M3 x 5.8mm |
 |   .  |   .  |   3  |   5  |    8  |    Heatshrink sleeving ID 3.2mm x 15mm - not shown |
 |   .  |   .  |   1  |   .  |    1  |    IEC inlet for ATX |
 |   .  |   .  |   .  |   1  |    1  |    Mains socket 13A |
@@ -65,7 +65,7 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 ### Vitamins
 |Qty|Description|
 |---:|:----------|
-|2| Heatfit insert M3|
+|2| Heatfit insert M3 x 5.8mm|
 
 
 ### 3D Printed parts