mirror of
https://github.com/nophead/NopSCADlib.git
synced 2025-08-09 00:46:32 +02:00
Added printed cable clips.
This commit is contained in:
Chris Palmer
BIN
libtest.png
BIN
libtest.png
Binary file not shown.
|
Before Width: | Height: | Size: 979 KiB After Width: | Height: | Size: 982 KiB |
66
libtest.scad
66
libtest.scad
@@ -51,6 +51,7 @@ use <tests/blowers.scad>
|
||||
use <tests/box_sections.scad>
|
||||
use <tests/bulldogs.scad>
|
||||
use <tests/buttons.scad>
|
||||
use <tests/cable_clip.scad>
|
||||
use <tests/cable_strips.scad>
|
||||
use <tests/cameras.scad>
|
||||
use <tests/camera_housing.scad>
|
||||
@@ -154,19 +155,46 @@ translate([x5 + 50, cable_grommets_y])
|
||||
translate([x5 + 95, cable_grommets_y])
|
||||
press_fits();
|
||||
|
||||
translate([x5, cable_grommets_y + 60])
|
||||
fixing_blocks_y = cable_grommets_y + 60;
|
||||
translate([x5, fixing_blocks_y])
|
||||
fixing_blocks();
|
||||
|
||||
translate([x5, cable_grommets_y + 90])
|
||||
corner_blocks_y = fixing_blocks_y + 30;
|
||||
translate([x5, corner_blocks_y])
|
||||
corner_blocks();
|
||||
|
||||
translate([x5, cable_grommets_y + 160])
|
||||
feet_y = corner_blocks_y + 70;
|
||||
translate([x5, feet_y])
|
||||
feet();
|
||||
|
||||
translate([x5 + 70, cable_grommets_y + 160])
|
||||
translate([x5 + 70, feet_y])
|
||||
screw_knobs();
|
||||
|
||||
translate([x5, cable_grommets_y + 470]) {
|
||||
knobs_y = feet_y + 40;
|
||||
translate([640, knobs_y])
|
||||
printed_pulley_test();
|
||||
|
||||
translate([x5, knobs_y])
|
||||
knobs();
|
||||
|
||||
clips_y = knobs_y + 50;
|
||||
translate([x5, clips_y])
|
||||
cable_clips();
|
||||
|
||||
strap_y = clips_y + 50;
|
||||
translate([x5 + 60, strap_y])
|
||||
strap_handles();
|
||||
|
||||
handle_y = strap_y + 50;
|
||||
translate([x5, handle_y])
|
||||
handle();
|
||||
|
||||
pocket_y = handle_y + 70;
|
||||
translate([x5 + 65, pocket_y])
|
||||
pocket_handles();
|
||||
|
||||
hinge_y = pocket_y + 100;
|
||||
translate([x5, hinge_y]) {
|
||||
door_hinges()
|
||||
door_latches();
|
||||
|
||||
@@ -174,29 +202,14 @@ translate([x5, cable_grommets_y + 470]) {
|
||||
flat_hinges();
|
||||
}
|
||||
|
||||
translate([x5, cable_grommets_y + 380])
|
||||
no_explode() socket_boxes();
|
||||
pbox_y = hinge_y + 70;
|
||||
translate([900, pbox_y])
|
||||
printed_boxes();
|
||||
|
||||
translate([640, cable_grommets_y + 200])
|
||||
printed_pulley_test();
|
||||
|
||||
translate([x5, cable_grommets_y + 200])
|
||||
knobs();
|
||||
|
||||
translate([x5 + 60, cable_grommets_y + 250])
|
||||
strap_handles();
|
||||
|
||||
translate([x5, cable_grommets_y + 300])
|
||||
handle();
|
||||
|
||||
translate([950, 600])
|
||||
box_y = pbox_y + 150;
|
||||
translate([950, box_y])
|
||||
box_test();
|
||||
|
||||
translate([900, 750])
|
||||
pocket_handles();
|
||||
|
||||
translate([900, 850])
|
||||
printed_boxes();
|
||||
|
||||
translate([950, 1400])
|
||||
rotate(-90)
|
||||
@@ -427,6 +440,9 @@ translate([x2, extrusions_y])
|
||||
translate([400, transformers_y])
|
||||
transformers();
|
||||
|
||||
translate([x4 + 50, transformers_y])
|
||||
no_explode() socket_boxes();
|
||||
|
||||
|
||||
belts_y = 0;
|
||||
rails_y = belts_y + 200;
|
||||
|
||||
117
printed/cable_clip.scad
Normal file
117
printed/cable_clip.scad
Normal file
@@ -0,0 +1,117 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2022
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
|
||||
//
|
||||
//! Cable clips to order. Can be for one or two cables of different sizes.
|
||||
//
|
||||
include <../core.scad>
|
||||
use <../vitamins/wire.scad>
|
||||
use <../utils/fillet.scad>
|
||||
|
||||
wall = 2;
|
||||
|
||||
function cable_clip_width(screw) = max(wall + 2 * screw_clearance_radius(screw) + wall, washer_diameter(screw_washer(screw))); //! Width given the `screw`.
|
||||
function cable_clip_height(cable) = cable_height(cable) + wall; //! Height given the `cable`.
|
||||
function cable_clip_extent(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) + wall; //! How far it extends from the screw.
|
||||
function cable_clip_offset(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) / 2; //! The offset of the cable from the screw
|
||||
|
||||
module single_cable_clip(screw, cable, h = 0) {
|
||||
screw_dia = 2 * screw_clearance_radius(screw);
|
||||
height = cable_clip_width(screw);
|
||||
depth = h ? h : cable_height(cable) + wall;
|
||||
w = cable_width(cable);
|
||||
width = wall + w + wall + screw_dia + wall;
|
||||
hole_x = wall + w + wall + screw_dia / 2;
|
||||
rad = min(wall + cable_wire_size(cable) / 2, depth / 2);
|
||||
r = extrusion_width - eps;
|
||||
translate([-hole_x, 0]) difference() {
|
||||
linear_extrude(height)
|
||||
difference() {
|
||||
hull() {
|
||||
rounded_square([width, 1], r, center = false);
|
||||
|
||||
translate([width - 1, 0])
|
||||
rounded_square([1, depth], r, center = false);
|
||||
|
||||
translate([rad, depth - rad])
|
||||
circle(r = rad);
|
||||
}
|
||||
|
||||
translate([wall + cable_width(cable) / 2, 0]) {
|
||||
hull() {
|
||||
for(p = cable_bundle_positions(cable))
|
||||
translate(p)
|
||||
circle(d = cable_wire_size(cable));
|
||||
|
||||
square([w, eps], center = true);
|
||||
}
|
||||
for(side = [-1, 1])
|
||||
translate([side * w / 2, 0])
|
||||
hflip(side < 0)
|
||||
fillet(r = r, h = 0);
|
||||
}
|
||||
}
|
||||
|
||||
translate([hole_x, depth / 2, height / 2])
|
||||
rotate([90,0,0])
|
||||
teardrop_plus(h = depth + 1, r = screw_dia / 2, center = true);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
module double_cable_clip(screw, cable1, cable2) {
|
||||
h = max(cable_clip_height(cable1), cable_clip_height(cable2));
|
||||
union() {
|
||||
single_cable_clip(screw, cable1, h);
|
||||
|
||||
mirror([1,0,0]) single_cable_clip(screw, cable2, h);
|
||||
}
|
||||
}
|
||||
|
||||
module cable_clip(screw, cable1, cable2 = 0) { //! Create the STL for a single cable or two cable clip
|
||||
function clip_str(screw) = str("cable_clip_", screw_radius(screw) * 20);
|
||||
function cable_str(cable) = str("_", cable_wires(cable), "_", round(cable_wire_size(cable) * 10));
|
||||
|
||||
if(cable2) {
|
||||
stl(str(clip_str(screw), cable_str(cable1), cable_str(cable2)));
|
||||
|
||||
double_cable_clip(screw, cable1, cable2);
|
||||
}
|
||||
else {
|
||||
stl(str(clip_str(screw), cable_str(cable1)));
|
||||
|
||||
single_cable_clip(screw, cable1);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
module cable_clip_assembly(screw, thickness, cable1, cable2 = 0) { //! Cable clip with the fasteners
|
||||
height = max(cable_clip_height(cable1), cable2 ? cable_clip_height(cable2) : 0);
|
||||
|
||||
stl_colour(pp1_colour) render()
|
||||
translate([0, cable_clip_width(screw) / 2]) rotate([90, 0, 0])
|
||||
cable_clip(screw, cable1, cable2);
|
||||
|
||||
translate_z(height)
|
||||
screw_and_washer(screw, screw_length(screw, height + thickness, 2, nyloc = true));
|
||||
|
||||
translate_z(-thickness)
|
||||
vflip()
|
||||
nut_and_washer(screw_nut(screw), true);
|
||||
}
|
||||
94
readme.md
94
readme.md
@@ -23,30 +23,31 @@ A list of changes classified as breaking, additions or fixes is maintained in [C
|
||||
<th align="left"> Vitamins A-H </th><th align="left"> Vitamins I-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
|
||||
<tr><td> <a href = "#7_segments">7_segments</a> </td><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
|
||||
<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
|
||||
<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
|
||||
<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||
<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||
<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Knob">Knob</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Terminals">Terminals</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Potentiometers">Potentiometers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_clip">Cable_clip</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
|
||||
<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
|
||||
<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
|
||||
<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
|
||||
<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
|
||||
<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Knob">Knob</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Terminals">Terminals</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
|
||||
<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Potentiometers">Potentiometers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
|
||||
<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
|
||||
<tr><td></td><td></td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
|
||||
</table>
|
||||
|
||||
---
|
||||
@@ -4686,6 +4687,51 @@ fixing_blocks along the sides.
|
||||
| 12 | fixing_block_M30_assembly |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
<a name="Cable_clip"></a>
|
||||
## Cable_clip
|
||||
Cable clips to order. Can be for one or two cables of different sizes.
|
||||
|
||||
[printed/cable_clip.scad](printed/cable_clip.scad) Implementation.
|
||||
|
||||
[tests/cable_clip.scad](tests/cable_clip.scad) Code for this example.
|
||||
|
||||
### Functions
|
||||
| Function | Description |
|
||||
|:--- |:--- |
|
||||
| `cable_clip_extent(screw, cable)` | How far it extends from the screw. |
|
||||
| `cable_clip_height(cable)` | Height given the `cable`. |
|
||||
| `cable_clip_offset(screw, cable)` | The offset of the cable from the screw |
|
||||
| `cable_clip_width(screw)` | Width given the `screw`. |
|
||||
|
||||
### Modules
|
||||
| Module | Description |
|
||||
|:--- |:--- |
|
||||
| `cable_clip(screw, cable1, cable2 = 0)` | Create the STL for a single cable or two cable clip |
|
||||
| `cable_clip_assembly(screw, thickness, cable1, cable2 = 0)` | Cable clip with the fasteners |
|
||||
|
||||
|
||||
|
||||
### Vitamins
|
||||
| Qty | Module call | BOM entry |
|
||||
| ---:|:--- |:---|
|
||||
| 5 | `nut(M3_nut, nyloc = true)` | Nut M3 x 2.4mm nyloc |
|
||||
| 2 | `screw(M3_dome_screw, 12)` | Screw M3 dome x 12mm |
|
||||
| 3 | `screw(M3_dome_screw, 16)` | Screw M3 dome x 16mm |
|
||||
| 10 | `washer(M3_washer)` | Washer M3 x 7mm x 0.5mm |
|
||||
|
||||
### Printed
|
||||
| Qty | Filename |
|
||||
| ---:|:--- |
|
||||
| 1 | cable_clip_30_10_13.stl |
|
||||
| 1 | cable_clip_30_1_14_2_14.stl |
|
||||
| 1 | cable_clip_30_1_60.stl |
|
||||
| 1 | cable_clip_30_3_14_4_14.stl |
|
||||
| 1 | cable_clip_30_5_14_6_14.stl |
|
||||
|
||||
|
||||
<a href="#top">Top</a>
|
||||
|
||||
---
|
||||
|
||||
59
tests/cable_clip.scad
Normal file
59
tests/cable_clip.scad
Normal file
@@ -0,0 +1,59 @@
|
||||
//
|
||||
// NopSCADlib Copyright Chris Palmer 2022
|
||||
// nop.head@gmail.com
|
||||
// hydraraptor.blogspot.com
|
||||
//
|
||||
// This file is part of NopSCADlib.
|
||||
//
|
||||
// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
|
||||
// GNU General Public License as published by the Free Software Foundation, either version 3 of
|
||||
// the License, or (at your option) any later version.
|
||||
//
|
||||
// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
|
||||
// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
|
||||
// See the GNU General Public License for more details.
|
||||
//
|
||||
// You should have received a copy of the GNU General Public License along with NopSCADlib.
|
||||
// If not, see <https://www.gnu.org/licenses/>.
|
||||
//
|
||||
|
||||
include <../core.scad>
|
||||
use <../printed/cable_clip.scad>
|
||||
use <../vitamins/wire.scad>
|
||||
|
||||
|
||||
sheet_thickness = 3;
|
||||
|
||||
cables = [
|
||||
for(i = [1 : 6]) [i, 1.4], [1, 6], 0, [10, inch(0.05), true], 0
|
||||
];
|
||||
|
||||
screw = M3_dome_screw;
|
||||
|
||||
|
||||
module cable_clips() {
|
||||
for(i = [0 : ceil(len(cables) / 2) - 1])
|
||||
translate([i * 25, 0]) {
|
||||
cable1 = cables[2 * i];
|
||||
cable2 = cables[2 * i + 1];
|
||||
|
||||
if($preview) {
|
||||
cable_clip_assembly(screw, sheet_thickness, cable1, cable2);
|
||||
|
||||
for(j = [0 : 1])
|
||||
let(cable = cables[2 * i + j])
|
||||
if(cable)
|
||||
let(positions = cable_bundle_positions(cable))
|
||||
for(i = [0 : len(positions) - 1])
|
||||
let(p = positions[i])
|
||||
translate([p.x + [-1, 1][j] * cable_clip_offset(screw, cable), 0, p.y])
|
||||
rotate([90, 0, 0])
|
||||
color([grey(20), "blue", "red", "orange", "yellow", "green", "brown", "purple", "grey", "white"][i])
|
||||
cylinder(d = cable_wire_size(cable), h = 30, center = true);
|
||||
}
|
||||
else
|
||||
cable_clip(screw, cable1, cable2);
|
||||
}
|
||||
}
|
||||
|
||||
cable_clips();
|
||||
BIN
tests/png/cable_clip.png
Normal file
BIN
tests/png/cable_clip.png
Normal file
Binary file not shown.
|
After Width: | Height: | Size: 131 KiB |
Reference in New Issue
Block a user