Martin Budden
da55f86536
Added variant of drag chain without supports.
...
Unsupported drag chain has conical pin and corresponding horihole and is printed with cutout facing upwards.
Also made clearance a property of the drag chain so it can be altered for printing chain assemblies
2021-11-20 07:21:09 +00:00
Chris Palmer
389e2f9c2e
Updated changelog.
2021-10-24 13:52:47 +01:00
Chris Palmer
c35e263113
Merge branch 'martinbudden-magnet_name'
2021-10-24 13:50:17 +01:00
Chris Palmer
bad33da95e
Updated images and readme.
2021-10-24 13:49:21 +01:00
Chris Palmer
f727e1d27d
Merge branch 'magnet_name' of https://github.com/martinbudden/NopSCADlib into martinbudden-magnet_name
2021-10-24 13:36:33 +01:00
Chris Palmer
5ddd9f6324
Updated changelog.
2021-10-24 13:35:39 +01:00
Chris Palmer
f5d0bfb6c8
Fixed drill center parameter in poly_drill().
2021-10-24 13:33:51 +01:00
Chris Palmer
b2117fa99a
atx_psu_cutout(type) now parametric and can be shown in the test.
...
ATX300 PSU now has a correct cutout and more accurate grill holes.
The four margins around grill holes can now be specified.
2021-10-24 13:32:46 +01:00
Chris Palmer
6687a4a7c6
Added jack_4mm_flange_radius().
2021-10-24 13:24:25 +01:00
Chris Palmer
8524ddd34d
Foot now lowered by squeeze distance so the washer is visible.
2021-10-24 13:23:45 +01:00
Martin Budden
427ef610de
Allowed naming of magnets. Added radial encoder magnet.
2021-10-21 10:37:56 +01:00
Chris Palmer
c8869fc415
Updated changelog.
2021-10-20 20:38:12 +01:00
Chris Palmer
21c06667a3
Added ATX300 PSU model.
2021-10-20 20:35:45 +01:00
Chris Palmer
d19fad3f9f
PSU grills can now have different holes sizes, spacing, round or heaxagonal and avoid a list of rectangular regions.
2021-10-20 20:33:52 +01:00
Chris Palmer
172bfb16d8
Added lugless pressfit IEC inlet.
2021-10-20 12:50:35 +01:00
Chris Palmer
491dbae13b
screw_shorter_than() will return 4 or 3 for short grub screws.
2021-10-09 12:05:13 +01:00
Chris Palmer
99ebfffd2b
Updated changelog.
2021-10-06 10:14:18 +01:00
Chris Palmer
f04486a040
Merge branch 'martinbudden-extrusion_convexity'
2021-10-06 10:12:54 +01:00
Chris Palmer
42a7d222b5
Merge branch 'extrusion_convexity' of https://github.com/martinbudden/NopSCADlib into martinbudden-extrusion_convexity
2021-10-06 10:08:08 +01:00
Chris Palmer
598a01295f
Updated changelog.
2021-10-06 10:05:49 +01:00
Chris Palmer
5f72a12125
Nuts shown on jacks and fuseholders only shown threaded when exploded.
2021-10-06 07:32:50 +01:00
Chris Palmer
82502eb470
Added pot_nut() module to draw potentiometer nuts and washers.
2021-10-06 07:31:47 +01:00
Chris Palmer
b541298eae
Printed foot assembly can now omit the top washer when space is at a premium.
...
Now correctly shows the screw in the squeezed position.
2021-10-05 12:33:55 +01:00
Chris Palmer
9884160ed5
Updated the gallery
2021-10-02 20:45:15 +01:00
Martin Budden
046c475e18
Set convexity to 8 for linear_extrude of extrusion.
2021-10-02 09:20:51 +01:00
Chris Palmer
7b111c016a
Updated changelog.
2021-10-01 12:37:49 +01:00
Chris Palmer
38c973b316
FR4 veroboard made the correct colour.
...
veroboard track cuts made slightly bigger.
2021-10-01 12:34:49 +01:00
Chris Palmer
042d809ed0
Resistor and thermistor wires made more round.
2021-10-01 12:33:35 +01:00
Chris Palmer
3864839e52
Fixed encoder breakout descripion typo.
2021-10-01 12:32:47 +01:00
Chris Palmer
2ba2c2c115
Removed some unused dependencies.
2021-10-01 12:32:01 +01:00
Chris Palmer
e3716ce8f9
Updated changelog.
2021-09-29 11:36:36 +01:00
Chris Palmer
c4f24974ab
Merge branch 'martinbudden-hotend_includes'
2021-09-29 11:33:33 +01:00
Chris Palmer
61dae9c7a4
Merge branch 'hotend_includes' of https://github.com/martinbudden/NopSCADlib into martinbudden-hotend_includes
2021-09-29 11:03:22 +01:00
Chris Palmer
41a26c453c
Updated changelog.
2021-09-29 10:46:45 +01:00
Chris Palmer
bab4c8e8af
TO247_size() now also returns lead height and the length of the wide bit.
...
TO247 leads fixed at 3.
Lead length removed from TO220 and TO247 vitamin string.
2021-09-29 10:42:37 +01:00
Martin Budden
a5c4bf05ad
Added hot end style string literals following discussion.
2021-09-28 17:54:42 +01:00
Martin Budden
a65add65ac
Removed hotend global enums.
2021-09-28 16:08:57 +01:00
Chris Palmer
c449dd0a24
Updated changelog.
2021-09-27 17:50:00 +01:00
Chris Palmer
f16f7ddb09
Images reverted to last OpenSCAD release versions.
...
Mainly text spacing changes.
2021-09-27 17:45:57 +01:00
Chris Palmer
9b5ec6af1a
Fixed new rounded_polygon to work with last OpenSCAD release.
...
Trainling commas in let().
2021-09-27 17:16:36 +01:00
Chris Palmer
50958b064d
Added $show_plugs to show crude reprentations of housings on pin_headers and Molex KK headers.
2021-09-27 16:36:47 +01:00
Chris Palmer
c37373c920
Added TO247() and TO247_size() to component.scad.
2021-09-27 16:21:37 +01:00
Chris Palmer
700f5a2205
fanguard() can now be made without screw holes to get just the grill.
2021-09-27 16:19:38 +01:00
Chris Palmer
4993c3e82d
Module blurb parenthesis parsing is now greedy to handle args that default to function calls.
...
This means that library modules cannot be one liners.
2021-09-27 16:17:08 +01:00
Chris Palmer
c6b280f0e8
_box_assembly() fix for corners = 0.
2021-09-26 11:26:01 +01:00
Chris Palmer
6012787781
Added jack_4mm_plastic().
2021-09-26 11:25:08 +01:00
Chris Palmer
30db66034c
Rounded_polygons are now generated by a function returning a point list.
...
The module version simply passes this to polygon.
The arcs now sections of a circle4n() rather than a circle().
2021-09-26 10:54:01 +01:00
Chris Palmer
d6f344be3d
Updated changelog.
2021-09-16 23:36:47 +01:00
Chris Palmer
f6aa3b3426
fuseholder_hole() now makes a poly_hole when cnc_bit+_r is 0.
2021-09-16 22:15:26 +01:00
Chris Palmer
91c8c7bf4d
cnc_bit_r is now set to zero in stl(), so holes are suitable for 3D printing rather than routing.
2021-09-16 22:14:30 +01:00
