Corrected core XY comment.

readme.md

@@ -208,7 +208,7 @@ exposing enough information to make a battery box.
 <a name="Belts"></a>
 ## Belts
 Models timing belt running over toothed or smooth pulleys and calculates an accurate length.
-Only models 2D paths, so not core XY!
+Only models 2D paths, so not crossed belt core XY!
 
 To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
 
@@ -250,15 +250,16 @@ Individual teeth are not drawn, instead they are represented by a lighter colour
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | ```belt(GT2x6, [ ... ])``` |  Belt GT2 x 6mm x 128mm |
-|   1 | ```belt(GT2x6, [ ... ], 80, [0, 0])``` |  Belt GT2 x 6mm x 696mm |
+|   2 | ```belt(GT2x6, [ ... ], 80, [0, 0])``` |  Belt GT2 x 6mm x 572mm |
 |   1 | ```belt(T2p5x6, [ ... ])``` |  Belt T2.5 x 6mm x 130mm |
 |   1 | ```belt(T5x10, [ ... ])``` |  Belt T5 x 10mm x 130mm |
 |   1 | ```belt(T5x6, [ ... ])``` |  Belt T5 x 6mm x 130mm |
-|   1 | ```insert(F1BM3)``` |  Heatfit insert M3 |
-|   2 | ```pulley(GT2x20_toothed_idler)``` |  Pulley GT2 idler 20 teeth |
+|   2 | ```insert(F1BM3)``` |  Heatfit insert M3 |
+|   2 | ```pulley(GT2x16_toothed_idler)``` |  Pulley GT2 idler 16 teeth |
+|   4 | ```pulley(GT2x20_toothed_idler)``` |  Pulley GT2 idler 20 teeth |
 |   2 | ```pulley(GT2x16_plain_idler)``` |  Pulley GT2 idler smooth 9.63mm |
 |   2 | ```pulley(GT2x20ob_pulley)``` |  Pulley GT2OB 20 teeth |
-|   1 | ```screw(M3_cs_cap_screw, 20)``` |  Screw M3 cs cap x 20mm |
+|   2 | ```screw(M3_cs_cap_screw, 20)``` |  Screw M3 cs cap x 20mm |
 |   4 | ```screw(M3_grub_screw, 6)``` |  Screw M3 grub x  6mm |
 
 
@@ -757,6 +758,7 @@ LCD dispays.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
+|   1 | ```display(BigTreeTech_TFT35v3_0)``` |  BigTreeTech TFT35 v3.0 |
 |   1 | ```display(HDMI5)``` |  HDMI display 5" |
 |   1 | ```display(LCD1602A)``` |  LCD display 1602A |
 |   1 | ```display(LCDS7282B)``` |  LCD display S-7282B |

tests/belts.scad

@@ -23,46 +23,52 @@ use <../vitamins/insert.scad>
 use <../utils/layout.scad>
 
 module belt_test() {
-    p1 = [75,  -50];
     p2 = [-75, -50];
     p3 = [-75, 100];
     p4 = [75,  100];
 
-    p5 = [75  - pulley_pr(GT2x20ob_pulley) - pulley_pr(GT2x16_plain_idler),  -pulley_pr(GT2x16_plain_idler)];
-    p6 = [-75 + pulley_pr(GT2x20ob_pulley) + pulley_pr(GT2x16_plain_idler),  -pulley_pr(GT2x16_plain_idler)];
+    p5 = [75  + pulley_pr(GT2x20ob_pulley) - pulley_pr(GT2x16_plain_idler), +pulley_pr(GT2x16_plain_idler)];
+    p6 = [-75 + pulley_pr(GT2x20ob_pulley) + pulley_pr(GT2x16_plain_idler), -pulley_pr(GT2x16_plain_idler)];
 
-    translate(p1) pulley_assembly(GT2x20ob_pulley);
-    translate(p2) pulley_assembly(GT2x20ob_pulley);
-    translate(p3) pulley_assembly(GT2x20_toothed_idler);
-    translate(p4) pulley_assembly(GT2x20_toothed_idler);
+    module pulleys(flip = false) {
+        translate(p2) rotate([0, flip ? 180 : 0, 0]) pulley_assembly(GT2x20ob_pulley);
+        translate(p3) pulley_assembly(GT2x20_toothed_idler);
+        translate(p4) pulley_assembly(GT2x20_toothed_idler);
+        translate(p5) {
+            pulley = GT2x16_toothed_idler;
+            screw = find_screw(hs_cs_cap, pulley_bore(pulley));
+            insert = screw_insert(screw);
 
-    translate(p5) {
-        pulley = GT2x16_plain_idler;
-        screw = find_screw(hs_cs_cap, pulley_bore(pulley));
-        insert = screw_insert(screw);
-
-        pulley_assembly(pulley);
-        translate_z(pulley_height(pulley) + pulley_offset(pulley) + screw_head_depth(screw, pulley_bore(pulley)))
-            screw(screw, 20);
-
-        translate_z(pulley_offset(pulley) - insert_length(insert))
-            vflip()
-                insert(insert);
+            rotate([0, flip ? 180 : 0, 0]) {
+                pulley_assembly(pulley);
+                translate_z(pulley_height(pulley) + pulley_offset(pulley) + screw_head_depth(screw, pulley_bore(pulley)))
+                    screw(screw, 20);
 
+                translate_z(pulley_offset(pulley) - insert_length(insert))
+                    vflip()
+                        insert(insert);
+            }
+        }
+        translate(p6) pulley_assembly(GT2x16_plain_idler);
     }
-    translate(p6) pulley_assembly(GT2x16_plain_idler);
 
-    path = [ [p1.x, p1.y, pulley_pr(GT2x20ob_pulley)],
-             [p5.x, p5.y, -pulley_pr(GT2x16_plain_idler)],
+    path = [ [p5.x, p5.y, pulley_pr(GT2x16_plain_idler)],
              [p6.x, p6.y, -pulley_pr(GT2x16_plain_idler)],
              [p2.x, p2.y, pulley_pr(GT2x20ob_pulley)],
              [p3.x, p3.y, pulley_pr(GT2x20ob_pulley)],
              [p4.x, p4.y, pulley_pr(GT2x20ob_pulley)]
            ];
+
     belt = GT2x6;
     belt(belt, path, 80, [0,  0]);
+    pulleys();
+    translate_z(20)
+        hflip() {
+            belt(belt, path, 80, [0,  0], belt_colour = grey(90), tooth_colour = grey(50));
+            pulleys(flip=true);
+        }
 
-    translate([-25, 0])
+    translate([-25, 0, 10])
         layout([for(b = belts) belt_width(b)], 10)
             rotate([0, 90, 0])
                 belt(belts[$i], [[0, 0, 20], [0, 1, 20]], belt_colour = $i%2==0 ? grey(90) : grey(20), tooth_colour = $i%2==0 ? grey(70) : grey(50));

vitamins/belt.scad

@@ -19,7 +19,7 @@
 
 //
 //! Models timing belt running over toothed or smooth pulleys and calculates an accurate length.
-//! Only models 2D paths, so not core XY!
+//! Only models 2D paths, so not crossed belt core XY!
 //!
 //! To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
 //!

vitamins/displays.scad

@@ -73,6 +73,42 @@ SSD1963_4p3 = ["SSD1963_4p3", "LCD display SSD1963 4.3\"", 105.5, 67.2, 3.4, SSD
         [[0, -34.5], [12, -31.5]],
         ];
 
-displays = [HDMI5, SSD1963_4p3, LCD1602A, LCDS7282B];
+BigTreeTech_TFT35v3_0_PCB = ["", "",
+    110, 55.77, 1.6, 0, 3, 0, "green",  false,
+    [ [-3.12, 3.17], [-3.12, -3.17], [3.12, -3.17], [3.12, 3.17] ],
+    [
+        [  10, 7.5,    0, "-button_6mm" ],
+        [   9,  43,    0, "-buzzer", 5, 9 ],
+        [   9,  27,    0, "-potentiometer" ],
+        [ 102,28.82,   0, "uSD", [26.5, 16, 3] ],
+        [16.5, 5.9,    0, "2p54boxhdr", 5, 2 ],
+        [36.5, 5.9,    0, "2p54boxhdr", 5, 2 ],
+        [56.5, 5.9,    0, "2p54boxhdr", 5, 2 ],
+        [82.5,   4,    0, "jst_xh", 5 ],
+        [26.5, 52.8, 180, "jst_xh", 2 ],
+        [39.5, 52.8, 180, "jst_xh", 3 ],
+        [52.5, 52.8, 180, "jst_xh", 3 ],
+        [65.5, 52.8, 180, "jst_xh", 3 ],
+        [78.5, 52.8, 180, "jst_xh", 3 ],
+        [94.5, 52.8, 180, "jst_xh", 5 ],
+        [   8,  43,  180, "usb_A" ],
+        [  97,   4,    0, "chip", 9, 3.5, 1, grey(20) ],
+        // ESP-8266
+        [  23,  28,   90, "2p54socket", 4, 2 ],
+    ],
+    []
+];
+
+BigTreeTech_TFT35v3_0 = ["BigTreeTech_TFT35v3_0", "BigTreeTech TFT35 v3.0",
+    84.5, 54.5, 4, BigTreeTech_TFT35v3_0_PCB,
+    [-6, 0, 0],                         // pcb offset
+    [[-40, -26.5], [41.5, 26.5, 0.5]],  // aperture
+    [],                                 // touch screen
+    0,                                  // thread length
+    [],                                 // clearance need for the ts ribbon
+];
+
+
+displays = [HDMI5, SSD1963_4p3, BigTreeTech_TFT35v3_0, LCD1602A, LCDS7282B];
 
 use <display.scad>