pulley_pr() now has an optional belt type for non-standard belt over smooth pulleys.

Changlog upated.

lib.scad

@@ -26,6 +26,7 @@ include <vitamins/psus.scad>
 include <vitamins/pcbs.scad>
 
 include <vitamins/batteries.scad>
+include <vitamins/bearing_blocks.scad>
 include <vitamins/blowers.scad>
 include <vitamins/bulldogs.scad>
 include <vitamins/buttons.scad>
@@ -37,7 +38,6 @@ include <vitamins/extrusion_brackets.scad>
 include <vitamins/geared_steppers.scad>
 include <vitamins/hot_ends.scad>
 include <vitamins/inserts.scad>
-include <vitamins/kp_pillow_blocks.scad>
 include <vitamins/ldrs.scad>
 include <vitamins/leadnuts.scad>
 include <vitamins/led_meter.scad>
@@ -47,12 +47,12 @@ include <vitamins/mains_sockets.scad>
 include <vitamins/modules.scad>
 include <vitamins/panel_meters.scad>
 include <vitamins/pillars.scad>
+include <vitamins/pillow_blocks.scad>
 include <vitamins/pin_headers.scad>
 include <vitamins/pulleys.scad>
 include <vitamins/ring_terminals.scad>
 include <vitamins/rails.scad>
 include <vitamins/rod.scad>
-include <vitamins/scs_bearing_blocks.scad>
 include <vitamins/shaft_couplings.scad>
 include <vitamins/sheets.scad>
 include <vitamins/sk_brackets.scad>
@@ -89,7 +89,7 @@ use <utils/gears.scad>
 use <utils/hanging_hole.scad>
 use <utils/fillet.scad>
 use <utils/rounded_polygon.scad>
-use <utils/rounded_right_triangle.scad>
+use <utils/rounded_triangle.scad>
 use <utils/layout.scad>
 use <utils/round.scad>
 use <utils/offset.scad>

libtest.scad

@@ -33,6 +33,8 @@
 //!
 //! See [usage](docs/usage.md) for requirements, installation instructions and a usage guide.
 //!
+//! A list of changes classified as breaking, additions or fixes is maintained in [CHANGELOG.md](CHANGELOG.md).
+//!
 //! <img src="libtest.png" width="100%"/>
 //
 // This file shows all the parts in the library.
@@ -41,6 +43,7 @@ include <lib.scad>
 
 use <tests/ball_bearings.scad>
 use <tests/batteries.scad>
+use <tests/bearing_blocks.scad>
 use <tests/belts.scad>
 use <tests/blowers.scad>
 use <tests/bulldogs.scad>
@@ -62,7 +65,6 @@ use <tests/hot_ends.scad>
 use <tests/IECs.scad>
 use <tests/inserts.scad>
 use <tests/jack.scad>
-use <tests/KP_pillow_blocks.scad>
 use <tests/leadnuts.scad>
 use <tests/LDRs.scad>
 use <tests/LEDs.scad>
@@ -78,6 +80,7 @@ use <tests/opengrab.scad>
 use <tests/panel_meters.scad>
 use <tests/PCBs.scad>
 use <tests/pillars.scad>
+use <tests/pillow_blocks.scad>
 use <tests/press_fit.scad>
 use <tests/PSUs.scad>
 use <tests/pulleys.scad>
@@ -86,7 +89,6 @@ use <tests/ring_terminals.scad>
 use <tests/rockers.scad>
 use <tests/rod.scad>
 use <tests/screws.scad>
-use <tests/SCS_bearing_blocks.scad>
 use <tests/sealing_strip.scad>
 use <tests/shaft_couplings.scad>
 use <tests/sheets.scad>
@@ -205,8 +207,8 @@ ball_bearings_y = pillars_y + 40;
 pulleys_y = ball_bearings_y +40;
 hot_ends_y = pulleys_y + 60;
 linear_bearings_y = hot_ends_y + 50;
-sheets_y = linear_bearings_y + 100;
-pcbs_y = sheets_y + 40;
+sheets_y = linear_bearings_y + 90;
+pcbs_y = sheets_y + 60;
 displays_y = pcbs_y + 170;
 fans_y = displays_y + 80;
 transformers_y = fans_y + 120;

readme.md

@@ -14,36 +14,38 @@ The license is GNU General Public License v3.0, see [COPYING](COPYING).
 
 See [usage](docs/usage.md) for requirements, installation instructions and a usage guide.
 
+A list of changes classified as breaking, additions or fixes is maintained in [CHANGELOG.md](CHANGELOG.md).
+
 <img src="libtest.png" width="100%"/>
 
 ## Table of Contents<a name="top"/>
 <table><tr>
 <th align="left"> Vitamins A-I </th><th align="left"> Vitamins J-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
 <tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
-<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#KP_pillow_blocks">KP_pillow_blocks</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
-<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
-<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
-<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SCS_bearing_blocks">SCS_bearing_blocks</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
-<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
-<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_right_triangle">Rounded_right_triangle</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td></td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
+<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
+<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
+<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
+<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
+<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
 </table>
 
 ---
@@ -198,6 +200,68 @@ exposing enough information to make a battery box.
 |   1 | `battery(S25R18650)` |  Cell Samsung 25R 18650 LION |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Bearing_blocks"></a>
+## Bearing_blocks
+SCSnUU and SCSnLUU bearing blocks
+
+[vitamins/bearing_blocks.scad](vitamins/bearing_blocks.scad) Object definitions.
+
+[vitamins/bearing_block.scad](vitamins/bearing_block.scad) Implementation.
+
+[tests/bearing_blocks.scad](tests/bearing_blocks.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `scs_bearing(type)` | Linear bearing used |
+| `scs_block_center_height(type)` | Height of the center of the block |
+| `scs_block_side_height(type)` | Height of the side of the block, this determines the minimum screw length |
+| `scs_circlip(type)` | Circlip used |
+| `scs_hole_offset(type)` | Offset of bearing hole from base of block |
+| `scs_screw(type)` | Screw type |
+| `scs_screw_separation_x(type)` | Screw separation in X direction |
+| `scs_screw_separation_z(type)` | Screw separation in Z direction |
+| `scs_spacer(type)` | Spacer used in long bearings |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `scs_size(type)` | Size of scs bracket bounding block |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `scs_bearing_block(type)` | Draw the specified SCS bearing block |
+| `scs_bearing_block_assembly(type, part_thickness, screw_type, nut_type)` | Assembly with screws and nuts in place |
+| `scs_bearing_block_hole_positions(type)` | Place children at hole positions |
+
+![bearing_blocks](tests/png/bearing_blocks.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|  12 | `nut(M4_nut)` |  Nut M4 x 3.2mm  |
+|  24 | `nut(M5_nut)` |  Nut M5 x 4mm  |
+|   1 | `scs_bearing_block(SCS10LUU)` |  SCS10LUU bearing block |
+|   1 | `scs_bearing_block(SCS10UU)` |  SCS10UU bearing block |
+|   1 | `scs_bearing_block(SCS12LUU)` |  SCS12LUU bearing block |
+|   1 | `scs_bearing_block(SCS12UU)` |  SCS12UU bearing block |
+|   1 | `scs_bearing_block(SCS16LUU)` |  SCS16LUU bearing block |
+|   1 | `scs_bearing_block(SCS16UU)` |  SCS16UU bearing block |
+|   1 | `scs_bearing_block(SCS6UU)` |  SCS6UU bearing block |
+|   1 | `scs_bearing_block(SCS8LUU)` |  SCS8LUU bearing block |
+|   1 | `scs_bearing_block(SCS8UU)` |  SCS8UU bearing block |
+|   4 | `screw(M4_cap_screw, 25)` |  Screw M4 cap x 25mm |
+|   8 | `screw(M4_cap_screw, 30)` |  Screw M4 cap x 30mm |
+|  16 | `screw(M5_cap_screw, 35)` |  Screw M5 cap x 35mm |
+|   8 | `screw(M5_cap_screw, 45)` |  Screw M5 cap x 45mm |
+|  12 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
+|  24 | `washer(M5_washer)` |  Washer  M5 x 10mm x 1mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -1307,58 +1371,6 @@ E.g. a "brown" socket for mains live needs to be displayed as "sienna" to look r
 |   1 | `jack_4mm_shielded("brown", 3, "sienna")` |  4mm shielded jack socket brown |
 
 
-<a href="#top">Top</a>
-
----
-<a name="KP_pillow_blocks"></a>
-## KP_pillow_blocks
-KP pillow block bearings
-
-[vitamins/kp_pillow_blocks.scad](vitamins/kp_pillow_blocks.scad) Object definitions.
-
-[vitamins/kp_pillow_block.scad](vitamins/kp_pillow_block.scad) Implementation.
-
-[tests/KP_pillow_blocks.scad](tests/KP_pillow_blocks.scad) Code for this example.
-
-### Properties
-| Function | Description |
-|:--- |:--- |
-| `kp_base_height(type)` | Height of base containing the bolts |
-| `kp_diameter(type)` | Rod hole diameter |
-| `kp_hole_offset(type)` | Rod hole offset |
-| `kp_screw_separation(type)` | Separation of bolts in the base |
-
-### Functions
-| Function | Description |
-|:--- |:--- |
-| `kp_size(type)` | Size of bracket |
-
-### Modules
-| Module | Description |
-|:--- |:--- |
-| `kp_pillow_block(type)` | Draw the KP pillow block |
-| `kp_pillow_block_assembly(type, part_thickness = 2, screw_type = M5_cap_screw, nut_type = undef)` | Assembly with fasteners in place |
-| `kp_pillow_block_hole_positions(type)` | Place children at hole positions |
-
-![kp_pillow_blocks](tests/png/kp_pillow_blocks.png)
-
-### Vitamins
-| Qty | Module call | BOM entry |
-| ---:|:--- |:---|
-|   1 | `kp_pillow_block(KP000)` |  KP000 pillow block |
-|   1 | `kp_pillow_block(KP001)` |  KP001 pillow block |
-|   1 | `kp_pillow_block(KP08_15)` |  KP08_15 pillow block |
-|   1 | `kp_pillow_block(KP08_18)` |  KP08_18 pillow block |
-|   2 | `sliding_t_nut(M4_hammer_nut)` |  Nut M4 hammer |
-|   2 | `sliding_t_nut(M4_sliding_t_nut)` |  Nut M4 sliding T |
-|   2 | `sliding_t_nut(M5_sliding_t_nut)` |  Nut M5 sliding T |
-|   2 | `nut(M5_nut, nyloc = undef)` |  Nut M5 x 4mm  |
-|   4 | `screw(M4_cap_screw, 10)` |  Screw M4 cap x 10mm |
-|   4 | `screw(M5_cap_screw, 12)` |  Screw M5 cap x 12mm |
-|   4 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
-|   6 | `washer(M5_washer)` |  Washer  M5 x 10mm x 1mm |
-
-
 <a href="#top">Top</a>
 
 ---
@@ -2442,6 +2454,58 @@ Threaded pillars. Each end can be male or female.
 |   1 | `pillar(M4x17_nylon_pillar)` |  Pillar nylon M/F M4x20 |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Pillow_blocks"></a>
+## Pillow_blocks
+KP pillow block bearings
+
+[vitamins/pillow_blocks.scad](vitamins/pillow_blocks.scad) Object definitions.
+
+[vitamins/pillow_block.scad](vitamins/pillow_block.scad) Implementation.
+
+[tests/pillow_blocks.scad](tests/pillow_blocks.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `kp_base_height(type)` | Height of base containing the bolts |
+| `kp_diameter(type)` | Rod hole diameter |
+| `kp_hole_offset(type)` | Rod hole offset |
+| `kp_screw_separation(type)` | Separation of bolts in the base |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `kp_size(type)` | Size of bracket |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `kp_pillow_block(type)` | Draw the KP pillow block |
+| `kp_pillow_block_assembly(type, part_thickness = 2, screw_type = M5_cap_screw, nut_type = undef)` | Assembly with fasteners in place |
+| `kp_pillow_block_hole_positions(type)` | Place children at hole positions |
+
+![pillow_blocks](tests/png/pillow_blocks.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `kp_pillow_block(KP000)` |  KP000 pillow block |
+|   1 | `kp_pillow_block(KP001)` |  KP001 pillow block |
+|   1 | `kp_pillow_block(KP08_15)` |  KP08_15 pillow block |
+|   1 | `kp_pillow_block(KP08_18)` |  KP08_18 pillow block |
+|   2 | `sliding_t_nut(M4_hammer_nut)` |  Nut M4 hammer |
+|   2 | `sliding_t_nut(M4_sliding_t_nut)` |  Nut M4 sliding T |
+|   2 | `sliding_t_nut(M5_sliding_t_nut)` |  Nut M5 sliding T |
+|   2 | `nut(M5_nut, nyloc = undef)` |  Nut M5 x 4mm  |
+|   4 | `screw(M4_cap_screw, 10)` |  Screw M4 cap x 10mm |
+|   4 | `screw(M5_cap_screw, 12)` |  Screw M5 cap x 12mm |
+|   4 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
+|   6 | `washer(M5_washer)` |  Washer  M5 x 10mm x 1mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -2617,7 +2681,7 @@ Timing belt pulleys, both toothed and plain with internal bearings for idlers.
 | `pulley_height(type)` | Total height of pulley |
 | `pulley_ir(type)` | Inside radius of the teeth |
 | `pulley_offset(type)` | Offset of the belt path centre |
-| `pulley_pr(type)` | Pitch radius |
+| `pulley_pr(type, belt = undef)` | Pitch radius, `belt` only needed for non-standard belt over smooth pulleys |
 
 ### Modules
 | Module | Description |
@@ -2976,68 +3040,6 @@ For an explanation of `screw_polysink()` see <https://hydraraptor.blogspot.com/2
 |   1 | polysink.stl |
 
 
-<a href="#top">Top</a>
-
----
-<a name="SCS_bearing_blocks"></a>
-## SCS_bearing_blocks
-SCSnUU and SCSnLUU bearing blocks
-
-[vitamins/scs_bearing_blocks.scad](vitamins/scs_bearing_blocks.scad) Object definitions.
-
-[vitamins/scs_bearing_block.scad](vitamins/scs_bearing_block.scad) Implementation.
-
-[tests/SCS_bearing_blocks.scad](tests/SCS_bearing_blocks.scad) Code for this example.
-
-### Properties
-| Function | Description |
-|:--- |:--- |
-| `scs_bearing(type)` | Linear bearing used |
-| `scs_block_center_height(type)` | Height of the center of the block |
-| `scs_block_side_height(type)` | Height of the side of the block, this determines the minimum screw length |
-| `scs_circlip(type)` | Circlip used |
-| `scs_hole_offset(type)` | Offset of bearing hole from base of block |
-| `scs_screw(type)` | Screw type |
-| `scs_screw_separation_x(type)` | Screw separation in X direction |
-| `scs_screw_separation_z(type)` | Screw separation in Z direction |
-| `scs_spacer(type)` | Spacer used in long bearings |
-
-### Functions
-| Function | Description |
-|:--- |:--- |
-| `scs_size(type)` | Size of scs bracket bounding block |
-
-### Modules
-| Module | Description |
-|:--- |:--- |
-| `scs_bearing_block(type)` | Draw the specified SCS bearing block |
-| `scs_bearing_block_assembly(type, part_thickness, screw_type, nut_type)` | Assembly with screws and nuts in place |
-| `scs_bearing_block_hole_positions(type)` | Place children at hole positions |
-
-![scs_bearing_blocks](tests/png/scs_bearing_blocks.png)
-
-### Vitamins
-| Qty | Module call | BOM entry |
-| ---:|:--- |:---|
-|  12 | `nut(M4_nut)` |  Nut M4 x 3.2mm  |
-|  24 | `nut(M5_nut)` |  Nut M5 x 4mm  |
-|   1 | `scs_bearing_block(SCS10LUU)` |  SCS10LUU bearing block |
-|   1 | `scs_bearing_block(SCS10UU)` |  SCS10UU bearing block |
-|   1 | `scs_bearing_block(SCS12LUU)` |  SCS12LUU bearing block |
-|   1 | `scs_bearing_block(SCS12UU)` |  SCS12UU bearing block |
-|   1 | `scs_bearing_block(SCS16LUU)` |  SCS16LUU bearing block |
-|   1 | `scs_bearing_block(SCS16UU)` |  SCS16UU bearing block |
-|   1 | `scs_bearing_block(SCS6UU)` |  SCS6UU bearing block |
-|   1 | `scs_bearing_block(SCS8LUU)` |  SCS8LUU bearing block |
-|   1 | `scs_bearing_block(SCS8UU)` |  SCS8UU bearing block |
-|   4 | `screw(M4_cap_screw, 25)` |  Screw M4 cap x 25mm |
-|   8 | `screw(M4_cap_screw, 30)` |  Screw M4 cap x 30mm |
-|  16 | `screw(M5_cap_screw, 35)` |  Screw M5 cap x 35mm |
-|   8 | `screw(M5_cap_screw, 45)` |  Screw M5 cap x 45mm |
-|  12 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
-|  24 | `washer(M5_washer)` |  Washer  M5 x 10mm x 1mm |
-
-
 <a href="#top">Top</a>
 
 ---
@@ -3154,6 +3156,7 @@ When woven sheets (e.g. carbon fibre) are rendered it is necessary to specify th
 |   1 | `sheet(FoilTape, 30, 30, 2)` |  Aluminium foil tape 30mm x 30mm x 0.05mm |
 |   1 | `sheet(AL6, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 6mm |
 |   1 | `sheet(AL8, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 8mm |
+|   1 | `sheet(Spring05, 30, 30, 2)` |  Bi-metal saw blade 30mm x 30mm x 0.5mm |
 |   1 | `sheet(Cardboard, 30, 30, 2)` |  Corrugated cardboard 30mm x 30mm x 5mm |
 |   1 | `sheet(Foam20, 30, 30, 2)` |  Foam sponge 30mm x 30mm x 20mm |
 |   1 | `sheet(DiBond, 30, 30, 2)` |  Sheet DiBond 30mm x 30mm x 3mm |
@@ -3172,6 +3175,7 @@ When woven sheets (e.g. carbon fibre) are rendered it is necessary to specify th
 |   1 | `sheet(CF3, 30, 30, 2)` |  Sheet carbon fiber 30mm x 30mm x 3mm |
 |   1 | `sheet(glass2, 30, 30, 2)` |  Sheet glass 30mm x 30mm x 2mm |
 |   1 | `sheet(Steel06, 30, 30, 2)` |  Sheet mild steel 30mm x 30mm x 0.6mm |
+|   1 | `sheet(Silicone3, 30, 30, 2)` |  Sheet silicone 30mm x 30mm x 3mm |
 
 
 <a href="#top">Top</a>
@@ -5570,6 +5574,70 @@ The coordinates of the lowest point on the curve can be retrieved by calling `ca
 ![catenary](tests/png/catenary.png)
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Core_xy"></a>
+## Core_xy
+Parameterised Core XY implementation. Draws the belts and provides utilities for positioning the pulleys.
+
+The belts are positioned according the bottom left "anchor" pulley and the top right drive pulley.
+Implementation has the following features:
+
+1. The drive and idler pulleys may be different sizes.
+2. The belt separation is parameterised.
+3. The separation of the plain and toothed pulleys on the Y carriages is parameterised, in both the X and the Y direction.
+4. The drive pulleys may be offset in the X and Y directions. If this is done, extra idler pulleys are added. This
+allows flexible positioning of the motors.
+
+[utils/core_xy.scad](utils/core_xy.scad) Implementation.
+
+[tests/core_xy.scad](tests/core_xy.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `coreXY_belt(type)` | Belt type |
+| `coreXY_drive_pulley(type)` | Drive pulley type |
+| `coreXY_lower_belt_colour(type)` | Colour of the lower belt |
+| `coreXY_lower_tooth_colour(type)` | Colour of the lower belt's teeth |
+| `coreXY_plain_idler(type)` | Plain idler type |
+| `coreXY_toothed_idler(type)` | Toothed idler type |
+| `coreXY_upper_belt_colour(type)` | Colour of the upper belt |
+| `coreXY_upper_tooth_colour(type)` | Colour of the upper belt's teeth |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `coreXY_coincident_separation(type)` | Value of x, y separation to make y-carriage pulleys coincident |
+| `coreXY_drive_plain_idler_offset(type)` | Offset of plain drive idler pulley |
+| `coreXY_drive_pulley_x_alignment(type)` | Belt alignment offset of the drive pulley relative to the anchor pulley |
+| `coreXY_drive_toothed_idler_offset(type)` | Offset of toothed drive idler pulley |
+| `coreXY_plain_idler_offset(type)` | Offset of y-carriage plain idler |
+| `coreXY_toothed_idler_offset(type)` | offset of y-carriage toothed idler |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false)` | Wrapper module to draw both belts of a coreXY setup |
+| `coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false)` | Draw the coreXY belts |
+| `coreXY_half(type, size, pos, separation_y = 0, x_gap = 0, plain_idler_offset = 0, drive_pulley_offset = [0, 0], show_pulleys = false, lower_belt = false, hflip = false)` | Draw one belt of a coreXY setup |
+
+![core_xy](tests/png/core_xy.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `belt(GT2x6, [ ... ], [10.0078, 11.69], [0, -24.686])` |  Belt GT2 x 6mm x 742mm |
+|   1 | `belt(GT2x6, [ ... ], [10.0078, 11.69], [0, -24.686])` |  Belt GT2 x 6mm x 852mm |
+|   7 | `pulley(GT2x16_toothed_idler)` |  Pulley GT2 idler 16 teeth |
+|   3 | `pulley(GT2x16_plain_idler)` |  Pulley GT2 idler smooth 9.63mm |
+|   2 | `pulley(GT2x20ob_pulley)` |  Pulley GT2OB 20 teeth |
+|   8 | `screw(M3_cap_screw, 20)` |  Screw M3 cap x 20mm |
+|   4 | `screw(M3_grub_screw, 6)` |  Screw M3 grub x  6mm |
+|   2 | `NEMA(NEMA17M)` |  Stepper motor NEMA17 x 40mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -5903,20 +5971,20 @@ Because the tangents need to be calculated to find the length these can be calcu
 <a href="#top">Top</a>
 
 ---
-<a name="Rounded_right_triangle"></a>
-## Rounded_right_triangle
+<a name="Rounded_triangle"></a>
+## Rounded_triangle
 Draw a 3D right triangle with rounded edges. Intended to be embedded in other parts. Can be optionally offset by the filleted amount.
 
-[utils/rounded_right_triangle.scad](utils/rounded_right_triangle.scad) Implementation.
+[utils/rounded_triangle.scad](utils/rounded_triangle.scad) Implementation.
 
-[tests/rounded_right_triangle.scad](tests/rounded_right_triangle.scad) Code for this example.
+[tests/rounded_triangle.scad](tests/rounded_triangle.scad) Code for this example.
 
 ### Modules
 | Module | Description |
 |:--- |:--- |
 | `rounded_right_triangle(x, y, z, fillet, center = true, offset = false)` | Draw a 3D right triangle with rounded edges. |
 
-![rounded_right_triangle](tests/png/rounded_right_triangle.png)
+![rounded_triangle](tests/png/rounded_triangle.png)
 
 
 <a href="#top">Top</a>

scripts/changelog.py

@@ -0,0 +1,163 @@
+#!/usr/bin/env python
+
+#
+# NopSCADlib Copyright Chris Palmer 2021
+# nop.head@gmail.com
+# hydraraptor.blogspot.com
+#
+# This file is part of NopSCADlib.
+#
+# NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+# GNU General Public License as published by the Free Software Foundation, either version 3 of
+# the License, or (at your option) any later version.
+#
+# NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+# without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with NopSCADlib.
+# If not, see <https://www.gnu.org/licenses/>.
+#
+#! Creates the changelog from the git log
+
+from __future__ import print_function
+import sys
+import subprocess
+import re
+
+filename = 'CHANGELOG.md'
+
+def tag_version(t):
+    """ Format a version tag """
+    return 'v%d.%d.%d' % t
+
+def initials(name):
+    """ Convert full name to initials with a tooltip """
+    i = ''.join([n[0].upper() + '.' for n in name.split(' ')])
+    return '[%s](# "%s")' % (i, name)
+
+def get_remote_url():
+    """ Get the git remote URL for the repository """
+    url = subprocess.check_output(["git", "config", "--get", "remote.origin.url"]).decode("utf-8").strip("\n")
+    if url.startswith("git@"):
+        url = url.replace(":", "/", 1).replace("git@", "https://", 1)
+    if url.endswith(".git"):
+        url = url[:-4]
+    return url
+
+def iscode(word):
+    """ try to guess if the word is code """
+    endings = ['()', '*']
+    starts = ['$', '--']
+    anywhere = ['.', '_', '=', '[', '/']
+    words = ['center', 'false', 'true', 'ngb']
+
+    for w in words:
+        if word == w:
+            return True
+
+    for end in endings:
+        if word.endswith(end):
+            return True
+
+    for start in starts:
+        if word.startswith(start):
+            return True
+
+    for any in anywhere:
+        if word.find(any) >= 0:
+            return True
+
+    return False
+
+def codify(word, url):
+    """ if a word is deemed code enclose it backticks """
+    if word:
+        if re.match(r'#[0-9]+', word):
+            return '[%s](%s "show issue")' % (word, url + '/issues/' + word[1:])
+        if iscode(word):
+            return  '`' + word + '`'
+    return word
+
+
+def fixup_comment(comment, url):
+    """ markup code words and fix new paragraphs """
+    result = ''
+    word = ''
+    code = False
+    for i, c in enumerate(comment):
+        if c == '`' or code:                # Already a code block
+            result += c                     # Copy verbatim
+            if c == '`': code = not code    # Keep track of state
+        else:
+            if c in ' \n' or (c == '.' and (i + 1 == len(comment) or comment[i + 1] in ' \n')): # if a word terminator
+                result += codify(word, url) + c  # Add codified word before terminator
+                word = ''
+            else:
+                word += c                   # Accumulate next word
+    result += codify(word, url)             # In case comment ends without a terminator
+    return result.replace('\n\n','\n\n * ') # Give new paragraphs a bullet point
+
+class Commit(): # members dynamically added from commit_fields
+    pass
+
+blurb = """
+# %s Changelog
+This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
+
+"""
+
+if __name__ == '__main__':
+    url = get_remote_url()
+
+    commit_fields = {
+        'hash':    "%H|",       # commit commit_hash
+        'tag':     "%D|",       # tag
+        'author': "%aN|",       # author name
+        'date': "  %as|",       # author date short form
+        'comment': "%B~"        # body
+    }
+
+    # Produce the git log
+    format = ''.join([v for k, v in commit_fields.items()])
+    text = subprocess.check_output(["git", "log", "--topo-order", "--format=" + format]).decode("utf-8")
+
+    # Process the log into a list of Commit objects
+    commits = []
+    for line in text.split('~'):
+        line = line.strip('\n')
+        if line:
+            fields = line.split('|')
+            commit = Commit()
+            for i, k in enumerate(commit_fields):
+                exec('commit.%s = """%s"""' % (k, fields[i]), locals())
+            # Convert version tag to tuple
+            if commit.tag:
+                match = re.match(r'.*tag: v([0-9]+)\.([0-9]+)\.([0-9]+).*', commit.tag)
+                commit.tag = (int(match.group(1)), int(match.group(2)), int(match.group(3))) if match else ''
+            commits.append(commit)
+
+    # Format the results from the Commit objects
+    with open(filename, "wt") as file:
+        print(blurb % url.split('/')[-1], file = file)
+        for i, c in enumerate(commits):
+            if c.tag:
+                ver = tag_version(c.tag)
+                level, type = (3, 'Fixes') if c.tag[2] else (2, 'Additions') if c.tag[1] else (1, 'Breaking Changes') if c.tag[0] else (1, 'First publicised version')
+
+                # Find the previous tagged commit
+                j = i + 1
+                diff = ''
+                while j < len(commits):
+                    if commits[j].tag:
+                        last_ver = tag_version(commits[j].tag)
+                        diff = '[...](%s "diff with %s")' % (url + '/compare/' + last_ver + '...' + ver, last_ver)
+                        break
+                    j += 1
+
+                # Print verson info
+                print('%s [%s](%s "show release") %s %s' % ('#' * (level + 1), ver, url + '/releases/tag/' + ver, type, diff), file = file)
+
+            # Print commits excluding merges
+            if not c.comment.startswith('Merge branch') and not c.comment.startswith('Merge pull'):
+                print('* %s [`%s`](%s "show commit") %s %s\n' % (c.date, c.hash[:7], url + '/commit/' + c.hash, initials(c.author), fixup_comment(c.comment, url)), file = file)

scripts/exports.py

@@ -142,7 +142,7 @@ def make_parts(target, part_type, parts = None):
                                                 f.write("use <%s/%s>\n" % (reltmp(dir, target), filename))
                                                 f.write("%s();\n" % module);
                                             t = time.time()
-                                            openscad.run("-D$bom=1", "-d", dname, "-o", part_file, part_maker_name)
+                                            openscad.run("-o", part_file, part_maker_name, "-D$bom=1", "-d", dname)
                                             times.add_time(part, t)
                                             if part_type == 'stl':
                                                 bounds = c14n_stl.canonicalise(part_file)

scripts/openscad.py

@@ -25,7 +25,7 @@ from __future__ import print_function
 import subprocess, sys
 
 def run_list(args, silent = False, verbose = False):
-    cmd = ["openscad", "--hardwarnings"] + args
+    cmd = ["openscad"] + args + ["--hardwarnings"]
     if not silent:
         for arg in cmd:
             print(arg, end=" ")

scripts/readme.md

@@ -8,6 +8,7 @@ They should work with both Python 2 and Python 3.
 |:---|:---|
 | `bom.py` | Generates BOM files for the project. |
 | `c14n_stl.py` | OpenSCAD produces randomly ordered STL files. This script re-orders them consistently so that GIT can tell if they have changed or not. |
+| `changelog.py` | Creates the changelog from the git log |
 | `doc_scripts.py` | Makes this document and doc/usage.md. |
 | `dxfs.py` | Generates DXF files for all the routed parts listed on the BOM or a specified list. |
 | `gallery.py` | Finds projects and adds them to the gallery. |

scripts/render.py

@@ -94,7 +94,7 @@ def render(target, type):
             cam = "--camera=0,0,0,70,0,315,500" if type == 'stl' else "--camera=0,0,0,0,0,0,500"
             render = "--preview" if type == 'stl' or colour != pp1 else "--render"
             tmp_name = tmp_dir + '/' + part[:-4] + '.png'
-            openscad.run(colour_scheme, "--projection=p", "--imgsize=4096,4096", cam, render, "--autocenter", "--viewall", "-o", tmp_name, png_maker_name);
+            openscad.run("-o", tmp_name, png_maker_name, colour_scheme, "--projection=p", "--imgsize=4096,4096", cam, render, "--autocenter", "--viewall");
             do_cmd(("magick "+ tmp_name + " -trim -resize 280x280 -background %s -gravity Center -extent 280x280 -bordercolor %s -border 10 %s"
                     % (background, background, tmp_name)).split())
             update_image(tmp_name, png_name)

scripts/tests.py

@@ -60,7 +60,8 @@ def compare_images(a, b, c):
     with open(log_name, 'w') as output:
         do_cmd(("magick compare -metric AE -fuzz %d%% %s %s %s" % (fuzz, a, b, c)).split(), output = output)
     with open(log_name, 'r') as f:
-        pixels = int(float(f.read().strip()))
+        pixels = f.read().strip()
+        pixels = int(float(pixels if pixels.isnumeric() else -1))
     os.remove(log_name)
     return pixels
 
@@ -116,7 +117,7 @@ def tests(tests):
         libtest = True
         lib_blurb = scrape_blurb(scad_name)
         if not os.path.isfile(png_name):
-            openscad.run(colour_scheme, "--projection=p", "--imgsize=%d,%d" % (w, h), "--camera=0,0,0,50,0,340,500", "--autocenter", "--viewall", "-o", png_name, scad_name);
+            openscad.run(scad_name, "-o", png_name, colour_scheme, "--projection=p", "--imgsize=%d,%d" % (w, h), "--camera=0,0,0,50,0,340,500", "--autocenter", "--viewall");
             do_cmd(["magick", png_name, "-trim", "-resize", "1280", "-bordercolor", background, "-border", "10", png_name])
     else:
         #
@@ -237,7 +238,7 @@ def tests(tests):
                 print(changed)
                 t = time.time()
                 tmp_name = tmp_dir + '/tmp.png'
-                openscad.run_list(options.list() + ["-D$bom=2", colour_scheme, "--projection=p", "--imgsize=%d,%d" % (w, h), "--camera=0,0,0,70,0,315,500", "--autocenter", "--viewall", "-d", dname, "-o", tmp_name, scad_name]);
+                openscad.run_list([scad_name, "-o", tmp_name] + options.list() + ["-D$bom=2", colour_scheme, "--projection=p", "--imgsize=%d,%d" % (w, h), "--camera=0,0,0,70,0,315,500", "--autocenter", "--viewall", "-d", dname]);
                 times.add_time(scad_name, t)
                 do_cmd(["magick", tmp_name, "-trim", "-resize", "1000x600", "-bordercolor", background, "-border", "10", tmp_name])
                 update_image(tmp_name, png_name)

scripts/views.py

@@ -221,7 +221,7 @@ def views(target, do_assemblies = None):
                                                 target_def = ['-D$target="%s"' % target] if target else []
                                                 cwd_def = ['-D$cwd="%s"' % os.getcwd().replace('\\', '/')]
                                                 view_def = ['--viewall', '--autocenter'] if not (zoomed & (1 << explode)) else ['--camera=0,0,0,55,0,25,140']
-                                                openscad.run_list(options.list() + target_def + cwd_def + view_def +["-D$pose=1", "-D$explode=%d" % explode, colour_scheme, "--projection=p", "--imgsize=4096,4096", "-d", dname, "-o", tmp_name, png_maker_name]);
+                                                openscad.run_list(["-o", tmp_name, png_maker_name] + options.list() + target_def + cwd_def + view_def + ["-D$pose=1", "-D$explode=%d" % explode, colour_scheme, "--projection=p", "--imgsize=4096,4096", "-d", dname]);
                                                 times.add_time(png_name, t)
                                                 do_cmd(["magick", tmp_name, "-trim", "-resize", "1004x1004", "-bordercolor", background, "-border", "10", tmp_name])
                                                 update_image(tmp_name, png_name)

tests/PCBs.scad

@@ -29,7 +29,7 @@ module pcbs() {
             rotate(90)
                 pcb_assembly(pcbs[$i], 5 + $i, 3);
 
-    translate([0, 120])
+    translate([0, 110])
         layout([for(p = perfboards) pcb_length(p)], 10)
             translate([0, -pcb_width(perfboards[$i]) / 2])
                 pcb_assembly(perfboards[$i], 5 + $i, 3);

tests/bearing_blocks.scad

@@ -17,7 +17,7 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 include <../core.scad>
-include <../vitamins/scs_bearing_blocks.scad>
+include <../vitamins/bearing_blocks.scad>
 
 use <../utils/layout.scad>
 

tests/core_xy.scad

@@ -0,0 +1,134 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+include <../core.scad>
+include <../vitamins/pulleys.scad>
+include <../vitamins/screws.scad>
+include <../vitamins/stepper_motors.scad>
+include <../vitamins/washers.scad>
+
+include <../utils/core_xy.scad>
+
+
+module coreXY_belts_test() {
+    coreXY_type = coreXY_GT2_20_16;
+    plain_idler = coreXY_plain_idler(coreXY_type);
+    toothed_idler = coreXY_toothed_idler(coreXY_type);
+
+    coreXYPosBL = [0, 0, 0];
+    coreXYPosTR = [200, 150, 0];
+    separation = [0, coreXY_coincident_separation(coreXY_type).y, pulley_height(plain_idler) + washer_thickness(M3_washer)];
+    pos = [100, 50];
+
+    upper_drive_pulley_offset = [40, 10];
+    lower_drive_pulley_offset = [0, 0];
+
+    coreXY_belts(coreXY_type,
+        carriagePosition = pos,
+        coreXYPosBL = coreXYPosBL,
+        coreXYPosTR = coreXYPosTR,
+        separation = separation,
+        x_gap = 10,
+        upper_drive_pulley_offset = upper_drive_pulley_offset,
+        lower_drive_pulley_offset = lower_drive_pulley_offset,
+        show_pulleys = true);
+
+
+    translate([coreXYPosBL.x + separation.x/2, coreXYPosTR.y + upper_drive_pulley_offset.y, separation.z/2]) {
+        // add the upper drive pulley stepper motor
+        translate([coreXY_drive_pulley_x_alignment(coreXY_type) + upper_drive_pulley_offset.x, 0, -pulley_height(coreXY_drive_pulley(coreXY_type))])
+            NEMA(NEMA17M);
+
+        // add the screws for the upper drive offset idler pulleys if required
+        if (upper_drive_pulley_offset.x > 0) {
+            translate(coreXY_drive_plain_idler_offset(coreXY_type))
+                translate_z(-pulley_offset(plain_idler))
+                    screw(M3_cap_screw, 20);
+            translate(coreXY_drive_toothed_idler_offset(coreXY_type))
+                translate_z(-pulley_offset(toothed_idler))
+                    screw(M3_cap_screw, 20);
+         } else if (upper_drive_pulley_offset.x < 0) {
+            translate([-pulley_od(plain_idler), coreXY_drive_plain_idler_offset(coreXY_type).y])
+                translate_z(-pulley_offset(plain_idler))
+                    screw(M3_cap_screw, 20);
+            translate([2*coreXY_drive_pulley_x_alignment(coreXY_type), coreXY_drive_toothed_idler_offset(coreXY_type).y])
+                translate_z(-pulley_offset(toothed_idler))
+                    screw(M3_cap_screw, 20);
+        }
+    }
+
+    translate([coreXYPosTR.x - separation.x/2, coreXYPosTR.y + lower_drive_pulley_offset.y, -separation.z/2]) {
+        // add the lower drive pulley stepper motor
+        translate([-coreXY_drive_pulley_x_alignment(coreXY_type) + lower_drive_pulley_offset.x, 0, -pulley_height(coreXY_drive_pulley(coreXY_type))])
+            NEMA(NEMA17M);
+
+        // add the screws for the lower drive offset idler pulleys if required
+        if (lower_drive_pulley_offset.x < 0) {
+            translate([-coreXY_drive_plain_idler_offset(coreXY_type).x, coreXY_drive_plain_idler_offset(coreXY_type).y])
+                translate_z(-pulley_offset(plain_idler))
+                    screw(M3_cap_screw, 20);
+            translate(coreXY_drive_toothed_idler_offset(coreXY_type))
+                translate_z(-pulley_offset(toothed_idler))
+                    screw(M3_cap_screw, 20);
+        } else if (lower_drive_pulley_offset.x > 0) {
+            translate([pulley_od(plain_idler), coreXY_drive_plain_idler_offset(coreXY_type).y])
+                translate_z(-pulley_offset(plain_idler))
+                    screw(M3_cap_screw, 20);
+            translate([-2*coreXY_drive_pulley_x_alignment(coreXY_type), coreXY_drive_toothed_idler_offset(coreXY_type).y])
+                translate_z(-pulley_offset(toothed_idler))
+                    screw(M3_cap_screw, 20);
+        }
+    }
+
+    // add the screw for the left upper idler pulley
+    translate([coreXYPosBL.x + separation.x/2, coreXYPosBL.y, separation.z])
+        screw(M3_cap_screw, 20);
+
+    // add the screw for the right upper idler pulley
+    translate([coreXYPosTR.x + separation.x/2, coreXYPosBL.y, separation.z])
+        screw(M3_cap_screw, 20);
+
+    if (separation.x != 0) {
+        // add the screw for the left lower idler pulley
+        translate([coreXYPosBL.x - separation.x/2, coreXYPosBL.y, 0])
+            screw(M3_cap_screw, 20);
+
+        // add the screw for the right lower idler pulley
+        translate([coreXYPosTR.x - separation.x/2, coreXYPosBL.y, 0])
+            screw(M3_cap_screw, 20);
+    }
+
+    translate([-separation.x/2, pos.y + coreXYPosBL.y -separation.y/2, -separation.z/2 + pulley_height(plain_idler)/2]) {
+        // add the screw for the left Y carriage toothed idler
+        translate([coreXYPosBL.x, coreXY_toothed_idler_offset(coreXY_type).y, 0])
+            screw(M3_cap_screw, 20);
+        // add the screw for the left Y carriage plain idler
+        translate([coreXYPosBL.x + separation.x + coreXY_plain_idler_offset(coreXY_type).x, separation.y + coreXY_plain_idler_offset(coreXY_type).y, separation.z])
+            screw(M3_cap_screw, 20);
+        // add the screw for the right Y carriage toothed idler
+        translate([coreXYPosTR.x + separation.x, coreXY_toothed_idler_offset(coreXY_type).y, separation.z])
+            screw(M3_cap_screw, 20);
+        // add the screw for the right Y carriage plain idler
+        translate([coreXYPosTR.x - coreXY_plain_idler_offset(coreXY_type).x, separation.y + coreXY_plain_idler_offset(coreXY_type).y, 0])
+            screw(M3_cap_screw, 20);
+    }
+}
+
+if ($preview)
+    coreXY_belts_test();

tests/pillow_blocks.scad

@@ -17,7 +17,7 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 include <../core.scad>
-include <../vitamins/kp_pillow_blocks.scad>
+include <../vitamins/pillow_blocks.scad>
 
 use <../utils/layout.scad>
 

tests/rounded_triangle.scad

@@ -18,7 +18,7 @@
 //
 
 include <../global_defs.scad>
-use <../utils/rounded_right_triangle.scad>
+use <../utils/rounded_triangle.scad>
 
 
 module rounded_right_triangles() {

tests/sheets.scad

@@ -25,25 +25,30 @@ include <../vitamins/screws.scad>
 width = 30;
 2d = true;
 
-module sheets()
-    layout([for(s = sheets) width], 5)
-        let(sheet = sheets[$i], w = sheet_is_woven(sheet) ? width : undef)
-        if(2d)
-            render_2D_sheet(sheet, w = w, d = w)
-                difference() {
-                    sheet_2D(sheet, width, width, 2);
+module sheets() {
+    rows = 2;
+    n = ceil(len(sheets) / rows);
+    w = width + 5;
+    for(y = [0 : rows - 1], x = [0 : n - 1], s = y * n + x)
+        if(s < len(sheets))
+            translate([width / 2 + x * w, y * w])
+                let(sheet = sheets[s], w = sheet_is_woven(sheet) ? width : undef)
+                if(2d)
+                    render_2D_sheet(sheet, w = w, d = w)
+                        difference() {
+                            sheet_2D(sheet, width, width, 2);
 
-                    circle(3);
-                }
-        else
-            render_sheet(sheet, w = w, d = w)
-                difference() {
-                    sheet(sheet, width, width, 2);
-
-                    translate_z(sheet_thickness(sheet) / 2)
-                        screw_countersink(M3_cs_cap_screw);
-                }
+                            circle(3);
+                        }
+                else
+                    render_sheet(sheet, w = w, d = w)
+                        difference() {
+                            sheet(sheet, width, width, 2);
 
+                            translate_z(sheet_thickness(sheet) / 2)
+                                screw_countersink(M3_cs_cap_screw);
+                        }
+}
 
 if($preview)
     sheets();

utils/core_xy.scad

@@ -0,0 +1,197 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Parameterised Core XY implementation. Draws the belts and provides utilities for positioning the pulleys.
+//!
+//! The belts are positioned according the bottom left "anchor" pulley and the top right drive pulley.
+//! Implementation has the following features:
+//!
+//! 1. The drive and idler pulleys may be different sizes.
+//! 2. The belt separation is parameterised.
+//! 3. The separation of the plain and toothed pulleys on the Y carriages is parameterised, in both the X and the Y direction.
+//! 4. The drive pulleys may be offset in the X and Y directions. If this is done, extra idler pulleys are added. This
+//! allows flexible positioning of the motors.
+//
+include <../core.scad>
+include <../vitamins/belts.scad>
+include <../vitamins/pulleys.scad>
+
+
+coreXY_GT2_20_20 = ["coreXY_20_20", GT2x6, GT2x20ob_pulley, GT2x20_toothed_idler, GT2x20_plain_idler, [0, 0, 1], [0, 0, 0.5, 1], [0, 1, 0], [0, 0.5, 0, 1] ];
+coreXY_GT2_20_16 = ["coreXY_20_16", GT2x6, GT2x20ob_pulley, GT2x16_toothed_idler, GT2x16_plain_idler, [0, 0, 1], [0, 0, 0.5, 1], [0, 1, 0], [0, 0.5, 0, 1] ];
+coreXY_GT2_16_16 = ["coreXY_16_16", GT2x6, GT2x16_pulley,   GT2x16_toothed_idler, GT2x16_plain_idler, [0, 0, 1], [0, 0, 0.5, 1], [0, 1, 0], [0, 0.5, 0, 1] ];
+
+function coreXY_belt(type)                  = type[1]; //! Belt type
+function coreXY_drive_pulley(type)          = type[2]; //! Drive pulley type
+function coreXY_toothed_idler(type)         = type[3]; //! Toothed idler type
+function coreXY_plain_idler(type)           = type[4]; //! Plain idler type
+function coreXY_upper_belt_colour(type)     = type[5]; //! Colour of the upper belt
+function coreXY_upper_tooth_colour(type)    = type[6]; //! Colour of the upper belt's teeth
+function coreXY_lower_belt_colour(type)     = type[7]; //! Colour of the lower belt
+function coreXY_lower_tooth_colour(type)    = type[8]; //! Colour of the lower belt's teeth
+
+// used to offset the position of the drive pulley and the y-carriage plain idler pulley
+// relative to the anchor pulley so that the belts align properly
+function coreXY_drive_pulley_x_alignment(type) = //! Belt alignment offset of the drive pulley relative to the anchor pulley
+    (pulley_od(coreXY_drive_pulley(type)) - pulley_od(coreXY_toothed_idler(type))) / 2;
+function coreXY_coincident_separation(type) = //! Value of x, y separation to make y-carriage pulleys coincident
+    [ -coreXY_plain_idler_offset(type).x, -(pulley_od(coreXY_plain_idler(type)) + pulley_od(coreXY_toothed_idler(type)))/2, 0 ];
+function coreXY_plain_idler_offset(type)    = //! Offset of y-carriage plain idler
+    [ (pulley_od(coreXY_plain_idler(type)) + pulley_od(coreXY_drive_pulley(type))) / 2 + coreXY_drive_pulley_x_alignment(type), pulley_od(coreXY_plain_idler(type))/2, 0 ];
+function coreXY_toothed_idler_offset(type)  = //! offset of y-carriage toothed idler
+    [ 0, -pulley_pr(coreXY_toothed_idler(type)), 0 ];
+// helper functions for positioning idlers when the stepper motor drive pulley is offset
+function coreXY_drive_toothed_idler_offset(type) = //! Offset of toothed drive idler pulley
+    [ 0, coreXY_drive_pulley_x_alignment(type), 0 ];
+function coreXY_drive_plain_idler_offset(type) = //! Offset of plain drive idler pulley
+    [ coreXY_plain_idler_offset(type).x, -(pulley_od(coreXY_plain_idler(type)) + pulley_od(coreXY_drive_pulley(type))) / 2, 0 ];
+
+
+module coreXY_half(type, size, pos, separation_y = 0, x_gap = 0, plain_idler_offset = 0, drive_pulley_offset = [0, 0], show_pulleys = false, lower_belt = false, hflip = false) { //! Draw one belt of a coreXY setup
+
+    // y-carriage toothed pulley
+    p0_type = coreXY_toothed_idler(type);
+    p0 = [ size.x / 2, -size.y / 2 - pulley_od(p0_type) / 2 + pos.y - separation_y / 2 ];
+
+    // bottom right toothed idler pulley
+    p1_type = p0_type;
+    p1 = [ size.x / 2, -size.y / 2 ];
+
+    // bottom left anchor toothed idler pulley
+    p2_type = p0_type;
+    p2 = [ -size.x / 2, -size.y / 2 ];
+
+    // stepper motor drive pulley
+    p3d_type = coreXY_drive_pulley(type);
+    p3d = [ -size.x / 2 + coreXY_drive_pulley_x_alignment(type) + drive_pulley_offset.x,
+             size.y / 2 + drive_pulley_offset.y
+    ];
+
+    // toothed idler for offset stepper motor drive pulley
+    p3t_type = coreXY_toothed_idler(type);
+    p3t = [ -size.x / 2 + (drive_pulley_offset.x > 0 ? 0 : 2*coreXY_drive_pulley_x_alignment(type)),
+            size.y / 2 + coreXY_drive_pulley_x_alignment(type) + drive_pulley_offset.y
+    ];
+
+    // y-carriage plain pulley
+    p4_type = coreXY_plain_idler(type);
+    p4 = [ -size.x / 2 + pulley_od(p4_type) / 2 + pulley_od(p3d_type) / 2 + coreXY_drive_pulley_x_alignment(type) + plain_idler_offset,
+           -size.y / 2 + pulley_od(p4_type) / 2 + pos.y + separation_y / 2
+    ];
+
+    // plain idler for offset stepper motor drive pulley
+    p3p_type = p4_type;
+    p3p = [ drive_pulley_offset.x > 0 ? p4.x : -p0.x - pulley_od(p0_type),
+            size.y / 2 - pulley_od(p3p_type) / 2 - pulley_od(p3d_type) / 2 + drive_pulley_offset.y
+    ];
+
+    // dummy pulleys for y separation
+    p5_type = p4_type;
+    p5 = [ pos.x - size.x / 2, -size.y / 2 + pos.y + separation_y / 2 ];
+    p6_type = p0_type;
+    p6 = [ pos.x - size.x / 2, -size.y / 2 + pos.y - separation_y / 2 ];
+
+    module show_pulleys(show_pulleys) {// Allows the pulley colour to be set for debugging
+        if (is_list(show_pulleys))
+            color(show_pulleys)
+                children();
+        else if (show_pulleys)
+            children();
+    }
+
+    show_pulleys(show_pulleys) {
+        translate(p0)
+            pulley_assembly(p0_type); // y-carriage toothed pulley
+        translate(p1)
+            pulley_assembly(p1_type); // bottom right toothed idler pulley
+        translate(p2)
+            pulley_assembly(p2_type); // bottom left anchor toothed idler pulley
+        translate(p3d)
+            hflip(hflip)
+                pulley_assembly(p3d_type); // top left stepper motor drive pulley
+        if (drive_pulley_offset.x) { // idler pulleys for offset stepper motor drive pulley
+            translate(p3t)
+                pulley_assembly(p3t_type); // toothed idler
+            translate(p3p)
+                pulley_assembly(p3p_type); // plain idler
+        }
+        translate(p4)
+            pulley_assembly(p4_type); // y-carriage plain pulley
+    }
+
+    path0a = [
+        [ p0.x, p0.y, pulley_od(p0_type) / 2 ],
+        [ p1.x, p1.y, pulley_od(p1_type) / 2 ],
+        [ p2.x, p2.y, pulley_od(p2_type) / 2 ]
+    ];
+    path0b = [
+        [ p3d.x, p3d.y, pulley_od(p3d_type) / 2 ],
+        [ p4.x, p4.y, -pulley_od(p4_type) / 2 ]
+    ];
+    path0c = [
+        [ p3t.x, p3t.y, pulley_od(p3t_type) / 2 ],
+        [ p3d.x, p3d.y, pulley_od(p3d_type) / 2 ],
+        [ p3p.x, p3p.y, -pulley_od(p3p_type) / 2 ],
+        [ p4.x, p4.y, -pulley_od(p4_type) / 2 ]
+    ];
+    path0d = [
+        [ p3p.x, p3p.y, -pulley_od(p3p_type) / 2 ],
+        [ p3d.x, p3d.y, pulley_od(p3d_type) / 2 ],
+        [ p3t.x, p3t.y, pulley_od(p3t_type) / 2 ],
+        [ p4.x, p4.y, -pulley_od(p4_type) / 2 ]
+    ];
+    path1 = [ // use eps for corner radius to get sharp corners so this part of the belt is deleted by the gap
+        [ p5.x, p5.y, eps ],
+        [ p6.x, p6.y, eps ]
+    ];
+
+    belt = coreXY_belt(type);
+
+    path0 = drive_pulley_offset.x == 0 ? concat(path0a, path0b) : drive_pulley_offset.x > 0 ? concat(path0a, path0c) : concat(path0a, path0d);
+    path = separation_y == 0 ? path0 : concat(path0, path1);
+
+    belt(type = belt,
+        points = path,
+        gap = [ x_gap + eps, abs(separation_y) + 2 ],
+        gap_pos = [ pos.x - size.x / 2, pos.y - size.y / 2 + belt_pitch_height(belt) - belt_thickness(belt) / 2 ],
+        belt_colour  = lower_belt ? coreXY_lower_belt_colour(type) : coreXY_upper_belt_colour(type),
+        tooth_colour = lower_belt ? coreXY_lower_tooth_colour(type) : coreXY_upper_tooth_colour(type));
+}
+
+module coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false) { //! Wrapper module to draw both belts of a coreXY setup
+    translate([size.x / 2 - separation.x / 2, size.y / 2, -separation.z / 2]) {
+        // lower belt
+        hflip()
+            explode(25)
+                coreXY_half(type, size, [size.x - pos.x - separation.x, pos.y], separation.y, x_gap, plain_idler_offset, [-lower_drive_pulley_offset.x, lower_drive_pulley_offset.y], show_pulleys, lower_belt = true, hflip = true);
+        // upper belt
+        translate([separation.x, 0, separation.z])
+            explode(25)
+                coreXY_half(type, size, [pos.x, pos.y], separation.y, x_gap, plain_idler_offset, upper_drive_pulley_offset, show_pulleys, lower_belt = false, hflip=false);
+    }
+}
+
+module coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false) { //! Draw the coreXY belts
+    assert(coreXYPosBL.z == coreXYPosTR.z);
+
+    coreXYSize = coreXYPosTR - coreXYPosBL;
+    translate(coreXYPosBL)
+        coreXY(type, coreXYSize, [carriagePosition.x - coreXYPosBL.x + separation.x / 2, carriagePosition.y - coreXYPosBL.y], separation = separation, x_gap = x_gap, plain_idler_offset = 0, upper_drive_pulley_offset = upper_drive_pulley_offset, lower_drive_pulley_offset = lower_drive_pulley_offset, show_pulleys = show_pulleys);
+}

utils/rounded_triangle.scad

@@ -21,7 +21,6 @@
 //! Draw a 3D right triangle with rounded edges. Intended to be embedded in other parts. Can be optionally offset by the filleted amount.
 //
 include <../utils/core/core.scad>
-include <..//utils/core/rounded_rectangle.scad>
 
 module rounded_right_triangle(x, y, z, fillet, center = true, offset = false) { //! Draw a 3D right triangle with rounded edges.
     fillet = max(fillet, eps);

vitamins/bearing_blocks.scad

@@ -40,4 +40,4 @@ SCS16LUU  = ["SCS16LUU",  9, 19, 25, 50, 85, 38.5, 32.5, 36, 60, 7,    M5_cap_sc
 scs_bearing_blocks = [SCS6UU, SCS8UU,  SCS10UU, SCS12UU, SCS16UU];
 scs_bearing_blocks_long = [SCS8LUU,  SCS10LUU, SCS12LUU, SCS16LUU];
 
-use <scs_bearing_block.scad>
+use <bearing_block.scad>

vitamins/pillow_blocks.scad

@@ -31,4 +31,4 @@ KP001 =   ["KP001",    12, 19, 71, 56, 16, 7.0,  6, 38, 14.5, 4, 32, M6_clearanc
 
 kp_pillow_blocks = [KP08_15, KP08_18, KP000, KP001];
 
-use <kp_pillow_block.scad>
+use <pillow_block.scad>

vitamins/pulley.scad

@@ -42,7 +42,7 @@ function pulley_screw(type)            = type[13]; //! Grub screw type
 function pulley_screws(type)           = type[14]; //! Number of grub screws
 
 function pulley_ir(type)     = pulley_od(type) / 2 - (pulley_teeth(type) ? belt_tooth_height(pulley_belt(type)) : 0);   //! Inside radius of the teeth
-function pulley_pr(type)     = let(belt = pulley_belt(type))                                                            //! Pitch radius
+function pulley_pr(type, belt = undef) = let(belt = is_undef(belt) ? pulley_belt(type) : belt)      //! Pitch radius, `belt` only needed for non-standard belt over smooth pulleys
                                  pulley_teeth(type) ? pulley_teeth(type) * belt_pitch(belt) / 2 / PI
                                                     : pulley_ir(type) + belt_thickness(belt) - belt_pitch_height(belt);
 

vitamins/sheets.scad

@@ -45,11 +45,14 @@ Foam20    = [ "Foam20",    "Foam sponge",             20,[0.3, 0.3, 0.3, 1    ],
 AL6       = [ "AL6",       "Aluminium tooling plate", 6, [0.9, 0.9, 0.9, 1    ], false];
 AL8       = [ "AL8",       "Aluminium tooling plate", 8, [0.9, 0.9, 0.9, 1    ], false];
 Steel06   = [ "Steel06",   "Sheet mild steel",       0.6,"silver"              , false];
-CF1 =       [ "CF1",       "Sheet carbon fiber",      1, grey(30),               false,  2,  2,  grey(25)];
-CF2 =       [ "CF2",       "Sheet carbon fiber",      2, grey(30),               false,  2,  2,  grey(25)];
-CF3 =       [ "CF3",       "Sheet carbon fiber",      3, grey(30),               false,  2,  2,  grey(25)];
+Spring05  = [ "Spring05",  "Bi-metal saw blade",     0.5,"#FBC300",              false];
+Silicone3 = [ "Silicone3", "Sheet silicone",          3, [0.9, 0.9, 0.9, 0.95 ], false];
+CF1 =       [ "CF1",       "Sheet carbon fiber",      1, grey(35),               false,  2,  2,  grey(20)];
+CF2 =       [ "CF2",       "Sheet carbon fiber",      2, grey(35),               false,  2,  2,  grey(20)];
+CF3 =       [ "CF3",       "Sheet carbon fiber",      3, grey(35),               false,  2,  2,  grey(20)];
 
 
-sheets = [CF1, CF2, CF3, MDF6, MDF10, MDF12, MDF19, PMMA2, PMMA3, PMMA6, PMMA8, PMMA10, glass2, DiBond, DiBond6, Cardboard, FoilTape, Foam20, AL6, AL8, Steel06];
+sheets = [CF1, CF2, CF3, MDF6, MDF10, MDF12, MDF19, PMMA2, PMMA3, PMMA6, PMMA8, PMMA10,
+         glass2, DiBond, DiBond6, Cardboard, FoilTape, AL6, AL8, Steel06, Spring05, Silicone3, Foam20];
 
 use <sheet.scad>