Added LIPO fuel gauge PCB.

Tiny PCBs now shown in a third line.

CHANGELOG.md

@@ -3,6 +3,12 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
 
 
+#### [v15.16.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.16.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.16.0...v15.16.1 "diff with v15.16.0")
+*   2021-06-04 [`9a4cc7e`](https://github.com/nophead/NopSCADlib/commit/9a4cc7ec42bf440e24ad3dacd88d7055736ae793 "show commit") [C.P.](# "Chris Palmer") Ziptie BOM entries no longer segregated by radius wrapped around.
+
+### [v15.16.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.16.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.15.0...v15.16.0 "diff with v15.15.0")
+*   2021-06-04 [`a782d43`](https://github.com/nophead/NopSCADlib/commit/a782d43e67f4091f44bd9018817e7263e2944477 "show commit") [C.P.](# "Chris Palmer") `bom.py` now generates `bom.csv` to allow costed BOMs to be made using a spreadsheet.
+
 ### [v15.15.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.15.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.14.2...v15.15.0 "diff with v15.14.2")
 *   2021-06-03 [`823f3b9`](https://github.com/nophead/NopSCADlib/commit/823f3b936e6c33897445d3f3272b69237f013537 "show commit") [C.P.](# "Chris Palmer") Add the ability to have a target specific top level module in place of `main_assembly()`.
 

global_defs.scad

@@ -54,9 +54,10 @@ $fs = extrusion_width / 2;
 function round_to_layer(z) = ceil(z / layer_height) * layer_height;
 // Some additional named colours
 function grey(n) = [0.01, 0.01, 0.01] * n;                                          //! Generate a shade of grey to pass to color().
-gold                            = [255/255, 215/255, 0/255];
-brass                           = [255/255, 220/255, 100/255];
 silver                          = [0.75, 0.75, 0.75];
+gold                            = [255, 215,   0] / 255;
+brass                           = [255, 220, 100] / 255;
+copper                          = [230, 140,  51] / 255;
 
 /*
  * Enums

readme.md

@@ -1303,7 +1303,7 @@ Needs updating as mostly obsolete versions.
 |   1 |  |  Tape self amalgamating silicone 110mm x 25mm |
 |   1 | `resistor(Epcos)` |  Thermistor Epcos B57560G104F 100K 1% - not shown |
 |   2 |  |  Wire Red PTFE 16/0.2mm strands, length 170mm |
-|   4 | `ziptie(small_ziptie, 8)` |  Ziptie 2.5mm x 100mm min length |
+|   4 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -2249,7 +2249,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `pcb_accessories(type)` | List of accessories to go on the BOM, SD cards, USB cables, etc. |
 | `pcb_colour(type)` | Colour of the subtrate |
 | `pcb_components(type)` | List of components |
-| `pcb_grid(type)` | Grid if a perfboard |
+| `pcb_grid(type)` | Grid origin if a perfboard |
 | `pcb_hole_d(type)` | Mounting hole diameter |
 | `pcb_holes(type)` | List of hole positions |
 | `pcb_land_d(type)` | Pad around mounting hole |
@@ -2386,7 +2386,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `pcb_accessories(type)` | List of accessories to go on the BOM, SD cards, USB cables, etc. |
 | `pcb_colour(type)` | Colour of the subtrate |
 | `pcb_components(type)` | List of components |
-| `pcb_grid(type)` | Grid if a perfboard |
+| `pcb_grid(type)` | Grid origin if a perfboard |
 | `pcb_hole_d(type)` | Mounting hole diameter |
 | `pcb_holes(type)` | List of hole positions |
 | `pcb_land_d(type)` | Pad around mounting hole |
@@ -2461,6 +2461,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(EnviroPlus)` |  Enviro+ |
 |   1 | `pcb(ExtruderPCB)` |  Extruder connection PCB |
 |   1 | `pcb(Keyes5p1)` |  Keyes5.1 Arduino Uno expansion board - not shown |
+|   1 | `pcb(LIPO_fuel_gauge)` |  LIPO fuel gauge |
 |   1 | `pcb(MP1584EN)` |  MP1584EN 3A buck converter |
 |   1 | `pcb(MT3608)` |  MT3608 boost converter module |
 |   1 | `pcb(Melzi)` |  Melzi electronics - not shown |
@@ -2470,13 +2471,14 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `molex_254(3)` |  Molex KK header 3 way |
 |  16 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
 |  30 | `nut(M2p5_nut, nyloc = true)` |  Nut M2.5 x 2.2mm nyloc |
-|  22 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
+|  26 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   8 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
 |   1 | `pcb(PI_IO)` |  PI_IO V2 |
 |   1 | `pcb(PSU12V1A)` |  PSU 12V 1A - not shown |
 |   1 | `pcb(PERF60x40)` |  Perfboard 60 x 40mm |
 |   1 | `pcb(PERF70x30)` |  Perfboard 70 x 30mm |
 |   1 | `pcb(PERF70x50)` |  Perfboard 70 x 50mm |
+|   1 | `pcb(PERF70x51)` |  Perfboard 70 x 51mm |
 |   1 | `pcb(PERF74x51)` |  Perfboard 74 x 51mm |
 |   1 | `pcb(PERF80x20)` |  Perfboard 80 x 20mm |
 |   1 | `pin_socket(2p54header, 13, 2, right_angle = true)` |  Pin socket 13 x 2 right_angle |
@@ -2484,16 +2486,18 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(RPI3)` |  Raspberry Pi 3 |
 |   1 | `pcb(RPI4)` |  Raspberry Pi 4 |
 |   1 | `pcb(RPI0)` |  Raspberry Pi Zero |
-|  12 | `screw(M2_cap_screw, 16)` |  Screw M2 cap x 16mm |
-|   4 | `screw(M2_cap_screw, 20)` |  Screw M2 cap x 20mm |
-|   2 | `screw(M2p5_cap_screw, 20)` |  Screw M2.5 cap x 20mm |
+|   8 | `screw(M2_cap_screw, 16)` |  Screw M2 cap x 16mm |
+|   8 | `screw(M2_cap_screw, 20)` |  Screw M2 cap x 20mm |
+|   2 | `screw(M2p5_cap_screw, 16)` |  Screw M2.5 cap x 16mm |
+|   8 | `screw(M2p5_cap_screw, 20)` |  Screw M2.5 cap x 20mm |
 |   8 | `screw(M2p5_cap_screw, 25)` |  Screw M2.5 cap x 25mm |
-|   8 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
-|  12 | `screw(M2p5_pan_screw, 25)` |  Screw M2.5 pan x 25mm |
-|   4 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
-|   9 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
-|   9 | `screw(M3_cap_screw, 35)` |  Screw M3 cap x 35mm |
+|   4 | `screw(M2p5_pan_screw, 20)` |  Screw M2.5 pan x 20mm |
+|   8 | `screw(M2p5_pan_screw, 25)` |  Screw M2.5 pan x 25mm |
+|   8 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
+|   4 | `screw(M3_cap_screw, 25)` |  Screw M3 cap x 25mm |
+|  14 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
 |   8 | `screw(M4_cap_screw, 35)` |  Screw M4 cap x 35mm |
+|   1 | `pcb(XIAO)` |  Seeeduino XIAO |
 |   1 | `pcb(TP4056)` |  TP4056 Li-lon Battery charger module |
 |   3 | `terminal_35(2)` |  Terminal block 2 way 3.5mm |
 |   2 | `green_terminal(gt_2p54, 4)` |  Terminal block 4 way 0.1" |
@@ -2501,32 +2505,33 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(WD2002SJ)` |  WD2002SJ Buck Boost DC-DC converter |
 |  16 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
 |  30 | `washer(M2p5_washer)` |  Washer  M2.5 x 5.9mm x 0.5mm |
-|  22 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+|  26 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   8 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 |   1 | `pcb(ZC_A0591)` |  ZC-A0591 ULN2003 driver PCB |
 
 ### Printed
 | Qty | Filename |
 | ---:|:--- |
-|   4 | pcb_spacer2060.stl |
+|   4 | pcb_spacer20100.stl |
 |   4 | pcb_spacer2070.stl |
 |   4 | pcb_spacer2080.stl |
 |   4 | pcb_spacer2090.stl |
-|   4 | pcb_spacer25120.stl |
-|   4 | pcb_spacer25130.stl |
-|   4 | pcb_spacer25140.stl |
-|   4 | pcb_spacer25150_2.stl |
-|   4 | pcb_spacer25160_2.stl |
-|   4 | pcb_spacer25180.stl |
-|   4 | pcb_spacer25190.stl |
-|   2 | pcb_spacer2580.stl |
-|   4 | pcb_spacer30170.stl |
-|   5 | pcb_spacer30200.stl |
-|   5 | pcb_spacer30210.stl |
-|   4 | pcb_spacer30220.stl |
+|   4 | pcb_spacer25100.stl |
+|   4 | pcb_spacer25110.stl |
+|   4 | pcb_spacer25120_2.stl |
+|   4 | pcb_spacer25130_2.stl |
+|   4 | pcb_spacer25150.stl |
+|   4 | pcb_spacer25160.stl |
+|   2 | pcb_spacer2550.stl |
+|   4 | pcb_spacer2590.stl |
+|   4 | pcb_spacer30140.stl |
+|   5 | pcb_spacer30170.stl |
+|   5 | pcb_spacer30180.stl |
+|   4 | pcb_spacer30190.stl |
 |   4 | pcb_spacer3050.stl |
-|   4 | pcb_spacer40230.stl |
-|   4 | pcb_spacer40240.stl |
+|   4 | pcb_spacer3060.stl |
+|   4 | pcb_spacer40200.stl |
+|   4 | pcb_spacer40210.stl |
 
 
 <a href="#top">Top</a>
@@ -3383,6 +3388,8 @@ Surface mount components for PCBs.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| `smd_cap_end_cap(type)` | End cap width |
+| `smd_cap_size(type)` | Body length, width |
 | `smd_led_lens(type)` | Lens length width and height |
 | `smd_led_size(type)` | Body length, width and height |
 | `smd_res_end_cap(type)` | End cap width |
@@ -3399,6 +3406,7 @@ Surface mount components for PCBs.
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `smd_capacitor(type, height)` | Draw an SMD capacitor with specified height |
 | `smd_led(type, colour, cutout)` | Draw an SMD LED with specified `colour` |
 | `smd_resistor(type, value)` | Draw an SMD resistor with specified value |
 
@@ -3409,6 +3417,9 @@ Surface mount components for PCBs.
 | ---:|:--- |:---|
 |   1 | `smd_led(LED0603, green)` |  SMD LED 0603 green |
 |   1 | `smd_led(LED0805, blue)` |  SMD LED 0805 blue |
+|   1 | `smd_capacitor(CAP0603)` |  SMD capacitor 0603 |
+|   1 | `smd_capacitor(CAP0805)` |  SMD capacitor 0805 |
+|   1 | `smd_capacitor(CAP1206)` |  SMD capacitor 1206 |
 |   1 | `smd_resistor(RES0603, 1R0)` |  SMD resistor 0603 1R0 0.1W |
 |   1 | `smd_resistor(RES0805, 10M)` |  SMD resistor 0805 10M 0.125W |
 |   1 | `smd_resistor(RES1206, 100K)` |  SMD resistor 1206 100K 0.25W |
@@ -4111,7 +4122,7 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 |   1 |  |  Wire orange 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire red 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire yellow 7/0.2mm strands, length 90mm |
-|   1 | `ziptie(small_ziptie, 2.1)` |  Ziptie 2.5mm x 100mm min length |
+|   1 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -4139,16 +4150,16 @@ Cable zipties.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `ziptie(type, r, t = 0)` | Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t` |
+| `ziptie(type, r = 5, t = 0)` | Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t` |
 
 ![zipties](tests/png/zipties.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `ziptie(small_ziptie, 5)` |  Ziptie 2.5mm x 100mm min length |
-|   1 | `ziptie(ziptie_3p6mm, 5)` |  Ziptie 3.6mm x 100mm min length |
-|   1 | `ziptie(ziptie_3mm, 5)` |  Ziptie 3mm x 100mm min length |
+|   1 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
+|   1 | `ziptie(ziptie_3p6mm)` |  Ziptie 3.6mm x 100mm min length |
+|   1 | `ziptie(ziptie_3mm)` |  Ziptie 3mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -5358,7 +5369,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 |   6 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   6 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   6 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
-|   3 | `ziptie(small_ziptie, 3)` |  Ziptie 2.5mm x 100mm min length |
+|   3 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |
@@ -5560,7 +5571,7 @@ The STL and assembly must be given a name and parameterless wrappers for the stl
 |   4 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   4 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   4 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
-|   4 | `ziptie(small_ziptie, 3)` |  Ziptie 2.5mm x 100mm min length |
+|   4 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |

scripts/views.py

@@ -77,7 +77,7 @@ def bom_to_assemblies(bom_dir, bounds_map):
     #
     if flat_bom:
         ass = flat_bom[-1]
-        if len(ass["assemblies"]) < 2 and not ass["vitamins"] and not ass["printed"] and not ass["routed"]:
+        if len(ass["assemblies"]) == 1 and not ass["vitamins"] and not ass["printed"] and not ass["routed"]:
             flat_bom = flat_bom[:-1]
     return [assembly["name"] for  assembly in flat_bom]
 

tests/PCBs.scad

@@ -29,7 +29,12 @@ module pcbs() {
             rotate(90)
                 pcb_assembly(pcbs[$i], 5 + $i, 3);
 
-    translate([0, 110])
+    translate([0, 45])
+        layout([for(p = tiny_pcbs) pcb_length(p)], 3)
+            translate([0, pcb_width(tiny_pcbs[$i]) / 2])
+                 pcb_assembly(tiny_pcbs[$i], 5 + $i, 3);
+
+    translate([0, 120])
         layout([for(p = perfboards) pcb_length(p)], 10)
             translate([0, -pcb_width(perfboards[$i]) / 2])
                 pcb_assembly(perfboards[$i], 5 + $i, 3);

tests/SMDs.scad

@@ -28,6 +28,11 @@ module smds() {
     translate([0, 3])
         layout([for(l = smd_leds) smd_led_size(l).x], 1)
             smd_led(smd_leds[$i], ["green", "blue", "red"][$i % 3]);
+
+    translate([0, 6])
+        layout([for(c = smd_capacitors) smd_cap_size(c).x], 1)
+            let(c = smd_capacitors[$i])
+                smd_capacitor(c, smd_cap_size(c).y * 0.8);
 }
 
 if($preview)

vitamins/pcb.scad

@@ -50,7 +50,7 @@ function pcb_parts_on_bom(type) = type[9];  //! True if the parts should be sepa
 function pcb_holes(type)        = type[10]; //! List of hole positions
 function pcb_components(type)   = type[11]; //! List of components
 function pcb_accessories(type)  = type[12]; //! List of accessories to go on the BOM, SD cards, USB cables, etc.
-function pcb_grid(type)         = type[13]; //! Grid if a perfboard
+function pcb_grid(type)         = type[13]; //! Grid origin if a perfboard
 function pcb_polygon(type)      = type[14]; //! Optional outline polygon for odd shaped boards
 function pcb_screw(type, cap = hs_cap) = Len(type[15]) ? type[15] : find_screw(cap, screw_smaller_than(pcb_hole_d(type))); //! Mounting screw type
 function pcb_size(type) = [pcb_length(type), pcb_width(type), pcb_thickness(type)]; //! Length, width and thickness in a vector
@@ -919,6 +919,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
     rotate(comp.z) {
         // Components that have a cutout parameter go in this section
         if(show(comp, "2p54header"))    pin_header(2p54header, comp[4], comp[5], param(6, false), param(8, false), cutouts, colour = param(7, undef));
+        if(show(comp, "2p54joiner"))    pin_header(2p54joiner, comp[4], comp[5], param(6, false), param(8, false), cutouts, colour = param(7, undef));
         if(show(comp, "2p54boxhdr"))    box_header(2p54header, comp[4], comp[5], param(6, false), cutouts);
         if(show(comp, "2p54socket"))    pin_socket(2p54header, comp[4], comp[5], param(6, false), param(7, 0), param(8, false), cutouts, param(9, undef));
         if(show(comp, "chip"))          chip(comp[4], comp[5], comp[6], param(7, grey(30)), cutouts);
@@ -954,16 +955,18 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
             if(show(comp, "gterm635"))      green_terminal(gt_6p35, comp[4], comp[5], param(6,"lime"));
             if(show(comp, "term35"))        terminal_35(comp[4], param(5,"blue"));
             if(show(comp, "transition"))    idc_transition(2p54header, comp[4], comp[5]);
-            if(show(comp, "led"))           led(comp[4], comp[5], 2.6);
+            if(show(comp, "led"))           translate_z(eps) led(comp[4], comp[5], 2.6);
             if(show(comp, "pdip"))          pdip(comp[4], comp[5], param(6, false), param(7, inch(0.3)));
             if(show(comp, "ax_res"))        ax_res(comp[4], comp[5], param(6, 5), param(7, 0));
             if(show(comp, "link"))          wire_link(l = comp[4], h = param(5, 1), d = param(6, 0.8), tail = param(7, 3));
             if(show(comp, "D_plug"))        translate_z(d_pcb_offset(comp[4])) d_plug(comp[4], pcb = true);
             if(show(comp, "molex_hdr"))     molex_254(comp[4]);
             if(show(comp, "jst_xh"))        jst_xh_header(jst_xh_header, comp[4], param(5, false), param(6, "white"), param(7, undef));
+            if(show(comp, "jst_ph"))        jst_xh_header(jst_ph_header, comp[4], param(5, false), param(6, "white"), param(7, undef));
             if(show(comp, "potentiometer")) potentiometer(param(4, 5), param(5, 9));
             if(show(comp, "buzzer"))        buzzer(param(4, 9), param(5, 12), param(6, grey(20)));
             if(show(comp, "smd_res"))       smd_resistor(comp[4], comp[5]);
+            if(show(comp, "smd_cap"))       smd_capacitor(comp[4], comp[5]);
         }
     }
 }
@@ -1018,44 +1021,64 @@ module pcb_grid_positions(type) {
 module pcb(type) { //! Draw specified PCB
     grid = pcb_grid(type);
     t = pcb_thickness(type);
+    w = pcb_width(type);
+    l = pcb_length(type);
+
+    module pcb_shape()
+        if(Len(pcb_polygon(type)))
+            polygon(pcb_polygon(type));
+        else
+            rounded_square([l, w], r = pcb_radius(type));
+
     if(pcb_name(type))
         vitamin(str("pcb(", type[0], "): ", pcb_name(type)));
 
     for(part = pcb_accessories(type))
         vitamin(part);
 
-    color(pcb_colour(type)) linear_extrude(t) difference() {
-        if(Len(pcb_polygon(type)))
-            polygon(pcb_polygon(type));
-        else
-            rounded_square([pcb_length(type), pcb_width(type)], r = pcb_radius(type));
+    color(pcb_colour(type))
+        linear_extrude(t)
+            difference() {
+                pcb_shape();
 
-        pcb_hole_positions(type)
-            circle(d = pcb_hole_d(type) + eps);
+                pcb_hole_positions(type)
+                    offset(eps)
+                        circle4n(d = pcb_hole_d(type));
 
-        if(Len(grid))
-            pcb_grid_positions(type)
-                circle(d = 1 + eps);
-    }
+                if(Len(grid))
+                    pcb_grid_positions(type)
+                        circle(d = 1 + eps);
+            }
 
     land = pcb_land_d(type);
+    land_r = Len(land) > 2 ? land[2] : 0;
     hole = pcb_hole_d(type);
-    color("silver")
+    plating = 0.1;
+    color(Len(land) > 3 ? land[3] : silver)
         translate_z(t / 2)
-            pcb_hole_positions(type)
-                if(is_list(land))
-                    linear_extrude(t + 2 * eps, center = true)
-                        difference() {
-                            square(land, center = true);
+            linear_extrude(t + 2 * plating, center = true)
+                difference() {
+                    intersection() {
+                        pcb_hole_positions(type)
+                            if(is_list(land)) {
+                                p = pcb_holes(type)[$i];  // If edge SMT pad then make it rectangular to overlap without gaps
+                                edge = abs(p.x) < eps || abs(p.x - l) < eps || abs(p.y) < eps || abs(p.y - w) < eps;
+                                rounded_square([land.x, land.y], edge ? 0 : land_r);
+                            }
+                            else
+                                circle(d = max(land, 1));
 
-                            circle(d = hole);
-                        }
-                else
-                    tube(or =  max(land, 1) / 2, ir = hole / 2, h = t + 2 * eps);
+                        offset(eps)
+                            pcb_shape();   // Handle half holes on the edge of PCBs such as ESP8266
+                    }
+
+                    pcb_hole_positions(type)
+                        circle4n(d = hole);
+                }
 
     fr4 = pcb_colour(type) != "sienna";
-    plating = 0.15;
-    color(pcb_colour(type) == "green" ? "silver" : "gold")
+    pcb_colour = pcb_colour(type);
+    color(pcb_colour == "green" ? silver : pcb_colour == "sienna" ? copper : gold)
         translate_z(-plating)
             linear_extrude(fr4 ? t + 2 * plating : plating)
                 if(Len(grid)) {

vitamins/pcbs.scad

@@ -705,6 +705,8 @@ PERF70x30 = ["PERF70x30", "Perfboard 70 x 30mm", 70, 30, 1.6, 0, 2.3, 0, "green"
 
 PERF60x40 = ["PERF60x40", "Perfboard 60 x 40mm", 60, 40, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
 
+PERF70x51 = ["PERF70x51", "Perfboard 70 x 51mm", 70, 51, 1.0, 0, 3.0, 0, "sienna", true, [[3.0, 5.25], [-3.0, 5.25], [3.0, -5.25], [-3.0, -5.25]], [], [], [5.79, 3.91]];
+
 PERF74x51 = ["PERF74x51", "Perfboard 74 x 51mm", 74, 51, 1.0, 0, 3.0, 0, "sienna", true, [[3.0, 3.5], [-3.0, 3.5], [3.0, -3.5], [-3.0, -3.5]], [], [], [9.5, 4.5]];
 
 PSU12V1A = ["PSU12V1A", "PSU 12V 1A", 67, 31, 1.7, 0, 3.9, 0, "green", true, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]], [], []];
@@ -747,10 +749,59 @@ ESP_01 = [
     [] // accessories
 ];
 
-pcbs = [MP1584EN, TP4056, ESP_01, RAMPSEndstop, MT3608, PI_IO, ExtruderPCB, ZC_A0591, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
+XIAO = [
+    "XIAO", "Seeeduino XIAO",
+    21, 18, 1.2, // Size
+    1.5, // corner radius
+    0.8, // mounting hole diameter
+    [2, 2.6, 1- eps, gold], // pad around mounting hole
+    grey(25), // color
+    false, // true if parts should be separate BOM items
+    [for(x = [0:6], y = [-1,1]) [x * 2.54 + 2.71, y * 3 * 2.54 + 9], // Inboard hole positions
+     for(x = [0:6], y = [-1,1]) [x * 2.54 + 2.71, y * 9 + 9]],       // Hole positions on the edge, pad overlaps the inboard holes
+    [ // components
+        [7.6, 9, 0, "block", 12.3, 12, 2.41, silver], // can
+        [21 + 1.76 - 7.35 / 2, 9, 0, "usb_C"],
+    ],
+    [] // accessories
+];
+
+LIPO_fuel_gauge = [
+    "LIPO_fuel_gauge", "LIPO fuel gauge",
+    24, 10, 1.6, // Size
+    0, // corner radius
+    1, // mounting hole diameter
+    1.8, // pad around mounting hole
+    "red", // color
+    false, // true if parts should be separate BOM items
+    [for(x = [0:2], y = [-1,1]) [x * 2.54 + 5.27, y * 1.5 * 2.54 + 5],
+     for(x = 3,     y = [-1,1]) [x * 2.54 + 5.27, y * 0.5 * 2.54 + 5]],
+    [ // components
+        [17, 5, 90, "jst_ph", 2, true],
+        [2.54 + 5.27,  1.5 * 2.54 + 5, 0, "-2p54joiner", 3, 1],
+        [2.54 + 5.27, -1.5 * 2.54 + 5, 0, "-2p54joiner", 3, 1],
+        [3 * 2.54 + 5.27, 5,           0, "-2p54joiner", 1, 2],
+        [6.4 + 1.5, 5, 0, "chip", 3, 2, 0.8],
+        [1.2,  2.5, 90, "smd_res", RES0603, "472"],
+        [2.4,  2.5, 90, "smd_res", RES0603, "472"],
+        [1.2, -2.5, 90, "smd_res", RES0603, "472"],
+        [2.4, -2.5, 90, "smd_res", RES0603, "472"],
+
+        [10.35, -4, -90, "smd_res", RES0603, "181"],
+        [10.35,  4, -90, "smd_res", RES0603, "102"],
+
+        [12.89, 1.5 * 2.54 + 5, 0, "smd_cap", CAP0603, 0.85],
+        [12.89,-1.5 * 2.54 + 5, 0, "smd_cap", CAP0603, 0.85],
+   ],
+    [] // accessories
+];
+
+tiny_pcbs = [XIAO, MP1584EN, TP4056, ESP_01, LIPO_fuel_gauge];
+
+pcbs = [RAMPSEndstop, MT3608, PI_IO, ExtruderPCB, ZC_A0591, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
 
 pcbs_not_shown = [Melzi, Duex2, PSU12V1A, Keyes5p1];
 
-perfboards = [PERF74x51, PERF70x50, PERF60x40, PERF70x30, PERF80x20];
+perfboards = [PERF74x51, PERF70x51, PERF70x50, PERF60x40, PERF70x30, PERF80x20];
 
 use <pcb.scad>

vitamins/pin_headers.scad

@@ -17,16 +17,18 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 
-//                               p     p     b    p     p       b         s    b                 b    p      r     r
-//                               i     i     e    i     i       a         o    o                 o    i      a     a
-//                               t     n     l    n     n       s         c    x                 x    n
-//                               c           o                  e         k                                  b     h
-//                               h     l     w    w     c                      s                 t    y
-//                                                              c         h    z                             o
+//                               p     p     b    p      p          b     s    b                 b    p      r   r
+//                               i     i     e    i      i          a     o    o                 o    i      a   a
+//                               t     n     l    n      n          s     c    x                 x    n
+//                               c           o                      e     k                                  b   h
+//                               h     l     w    w      c                     s                 t    y
+//                                                                  c     h    z                             o
 //                                                                                                           f
-2p54header    = ["2p54header",   2.54, 11.6, 3.2, 0.66, "gold", grey(20), 8.5, [0,   0,    8.7], 2.4, 0,     0,    0  ];
-jst_xh_header = ["jst_xh_header",2.5,  10,   3.4, 0.64, "gold", grey(90), 0,   [4.9, 5.75, 7],   0.8, 0.525, 0.6,  6.1];
-jst_ph_header = ["jst_ph_header",2.0,   9,   3.4, 0.64, silver, grey(90), 0,   [3.9, 4.5,  6],   0.6, 0.55,  0.25, 4.8];
+2p54header  = ["2p54header",   2.54, 11.6, 3.2, 0.66, gold,   grey(20), 8.5, [0,   0,    8.7], 2.4, 0,     0,    0  ];
+2p54joiner =  ["2p54joiner",   2.54, 6.86, 2.5, 0.66, gold,   grey(20), 8.5, [0,   0,    8.7], 2.4, 0,     0,    0  ]; // Cropped pins for joining PCBs
+
+jst_xh_header = ["jst_xh_header",2.5,  10, 3.4, 0.64, gold,   grey(90), 0,   [4.9, 5.75, 7],   0.8, 0.525, 0.6,  6.1];
+jst_ph_header = ["jst_ph_header",2.0,   9, 3.4, 0.64, silver, grey(90), 0,   [3.9, 4.5,  6],   0.6, 0.55,  0.25, 4.8];
 
 pin_headers = [ 2p54header ];
 

vitamins/smd.scad

@@ -109,3 +109,23 @@ module smd_resistor(type, value) { //! Draw an SMD resistor with specified value
                 resize([(size.x - 2 * cap) * 0.75, size.y / 2])
                     text(value, halign = "center", valign = "center");
 }
+
+function smd_cap_size(type)    = type[1]; //! Body length, width
+function smd_cap_end_cap(type) = type[2]; //! End cap width
+
+module smd_capacitor(type, height) { //! Draw an SMD capacitor with specified height
+    size = smd_cap_size(type);
+    vitamin(str("smd_capacitor(", type[0], "): SMD capacitor ", smd_size(size)));
+
+    cap = smd_cap_end_cap(type);
+
+    t = 0.02;
+    color("tan")
+        translate_z(height / 2)
+            cube([size.x - 2 * cap, size.y - 2 * t, height - 2 * t], center = true);
+
+    color(silver)
+        for(end = [-1, 1])
+            translate([end * (size.x / 2 - cap / 2), 0, height / 2])
+                cube([cap, size.y - 2 * eps, height], center = true);
+}

vitamins/smds.scad

@@ -32,4 +32,10 @@ RES1206 = ["RES1206", [3.1, 1.6, 0.6],  0.5, 1/4];
 
 smd_resistors = [RES0603, RES0805, RES1206];
 
+CAP0603 = ["CAP0603", [1.6, 0.8], 0.3];
+CAP0805 = ["CAP0805", [2.0, 1.2], 0.4];
+CAP1206 = ["CAP1206", [3.1, 1.6], 0.5];
+
+smd_capacitors = [CAP0603, CAP0805, CAP1206];
+
 use <smd.scad>

vitamins/veroboard.scad

@@ -83,7 +83,7 @@ module veroboard(type) { //! Draw specified veroboard with missing tracks and tr
     hole_d = 1;
     tw = vero_track_width(type);
     colour = vero_fr4(type) ? "green" : "goldenrod";
-    tc = vero_fr4(type) ? "silver" : "darkorange";
+    tc = vero_fr4(type) ? "silver" : copper;
     no_track = vero_no_track(type);
 
     vitamin(str("veroboard(", type[0], "): Veroboard ", holes, " holes x ", strips, "strips"));

vitamins/ziptie.scad

@@ -30,7 +30,7 @@ function ziptie_latch(type)     = type[3]; //! Latch dimensions
 function ziptie_colour(type)    = type[4]; //! Colour
 function ziptie_tail(type)      = type[5]; //! The length without teeth
 
-module ziptie(type, r, t = 0) //! Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t`
+module ziptie(type, r = 5, t = 0) //! Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t`
 {
     latch = ziptie_latch(type);
     lx = latch.x / 2;
@@ -50,7 +50,7 @@ module ziptie(type, r, t = 0) //! Draw specified ziptie wrapped around radius `r
     len = length <= 100 ? 100 : length;
     width =  ziptie_width(type);
 
-    vitamin(str("ziptie(", type[0], ", ", r, "): Ziptie ", width, "mm x ", len, "mm min length"));
+    vitamin(str("ziptie(", type[0], "): Ziptie ", width, "mm x ", len, "mm min length"));
 
     color(ziptie_colour(type)){
         linear_extrude(width, center = true)