Ziptie BOM entries no longer segregated by radius wrapped around.

Note, however, NopSCADlib does not work with the current OpenSCAD snapshot.

CHANGELOG.md

@@ -3,6 +3,110 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
 
 
+### [v15.16.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.16.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.15.0...v15.16.0 "diff with v15.15.0")
+*   2021-06-04 [`a782d43`](https://github.com/nophead/NopSCADlib/commit/a782d43e67f4091f44bd9018817e7263e2944477 "show commit") [C.P.](# "Chris Palmer") `bom.py` now generates `bom.csv` to allow costed BOMs to be made using a spreadsheet.
+
+### [v15.15.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.15.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.14.2...v15.15.0 "diff with v15.14.2")
+*   2021-06-03 [`823f3b9`](https://github.com/nophead/NopSCADlib/commit/823f3b936e6c33897445d3f3272b69237f013537 "show commit") [C.P.](# "Chris Palmer") Add the ability to have a target specific top level module in place of `main_assembly()`.
+
+#### [v15.14.2](https://github.com/nophead/NopSCADlib/releases/tag/v15.14.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.14.1...v15.14.2 "diff with v15.14.1")
+*   2021-06-02 [`749a1f0`](https://github.com/nophead/NopSCADlib/commit/749a1f0648196bd0ae47dbe93ac1b5e3a06d78cd "show commit") [C.P.](# "Chris Palmer") Fixed male thread z-fighting bug.
+
+*   2021-06-01 [`5c898df`](https://github.com/nophead/NopSCADlib/commit/5c898df2172a7e202c9e3d8c6641a0aaf95e5d48 "show commit") [C.P.](# "Chris Palmer") More readable code in `rounded_polygon`.
+
+#### [v15.14.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.14.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.14.0...v15.14.1 "diff with v15.14.0")
+*   2021-06-01 [`20d799a`](https://github.com/nophead/NopSCADlib/commit/20d799a3c115d3d32f101c4419d6e9b57c3be8c7 "show commit") [C.P.](# "Chris Palmer") `IEC_320_C14_switched_fused_inlet` now shows the correct object name in the example.
+
+### [v15.14.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.14.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.13.4...v15.14.0 "diff with v15.13.4")
+*   2021-05-31 [`2581098`](https://github.com/nophead/NopSCADlib/commit/258109811b7b7f71895340dc4b86b96d7dbc2037 "show commit") [C.P.](# "Chris Palmer") Added uppercase version of `BLCD_motors.scad`.
+
+*   2021-05-31 [`b39fd53`](https://github.com/nophead/NopSCADlib/commit/b39fd536c2841a95ab50b8a196e21ee8fc5976d1 "show commit") [C.P.](# "Chris Palmer") Removed lower case version of `bldc_motors.scad`.
+
+*   2021-05-31 [`a5a87d2`](https://github.com/nophead/NopSCADlib/commit/a5a87d260dd4bbe40a8727a4099207271918d02b "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2021-05-30 [`00ca412`](https://github.com/nophead/NopSCADlib/commit/00ca412441c85ea1fd7082453c823445fbbdce4e "show commit") [M.B.](# "Martin Budden") Added BLDC3548 motor.
+
+*   2021-05-30 [`1e6d7f5`](https://github.com/nophead/NopSCADlib/commit/1e6d7f5dd68e64181aef019bb8bca186abb2ac68 "show commit") [M.B.](# "Martin Budden") Brushless DC motors.
+
+#### [v15.13.4](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.4 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.3...v15.13.4 "diff with v15.13.3")
+*   2021-05-30 [`ec07d95`](https://github.com/nophead/NopSCADlib/commit/ec07d95657d52aab375b3b2acb95c87b369d2194 "show commit") [M.B.](# "Martin Budden") Added assertion to check colour format in module thread.
+
+#### [v15.13.3](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.3 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.2...v15.13.3 "diff with v15.13.2")
+*   2021-05-19 [`0dab0dc`](https://github.com/nophead/NopSCADlib/commit/0dab0dca08485d1717ee516a61831fcd6963e335 "show commit") [C.P.](# "Chris Palmer") Added missing includes `core.scad` which generates warnings with latest OpenSCAD snapshots.
+
+ * Note, however, NopSCADlib does not work with the current OpenSCAD snapshot.
+
+#### [v15.13.2](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.1...v15.13.2 "diff with v15.13.1")
+*   2021-05-15 [`9689683`](https://github.com/nophead/NopSCADlib/commit/9689683b7efbde882c057a903dd7fa018107d029 "show commit") [M.B.](# "Martin Budden") Typo in `global_defs`.
+
+#### [v15.13.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.0...v15.13.1 "diff with v15.13.0")
+*   2021-05-18 [`11ebe22`](https://github.com/nophead/NopSCADlib/commit/11ebe2225db09bdd45089e4ebf5c1037243bf45c "show commit") [C.P.](# "Chris Palmer") Removed spurious convexity in difference from `rounded_polygon()`.
+
+### [v15.13.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.12.0...v15.13.0 "diff with v15.12.0")
+*   2021-05-02 [`3401919`](https://github.com/nophead/NopSCADlib/commit/34019196cdac6b08e57d773e138a22394b609ea5 "show commit") [C.P.](# "Chris Palmer") Updated readme
+
+*   2021-05-02 [`436fc71`](https://github.com/nophead/NopSCADlib/commit/436fc71cf319c1e71b6cbd240b76d7cad5ecd8ba "show commit") [M.B.](# "Martin Budden") Added `blower_size` function.
+
+### [v15.12.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.12.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.11.1...v15.12.0 "diff with v15.11.1")
+*   2021-04-26 [`e2feceb`](https://github.com/nophead/NopSCADlib/commit/e2feceb608b4491424c0e4c1e7c191f7d8aeceec "show commit") [C.P.](# "Chris Palmer") Updated readme
+
+*   2021-04-25 [`9c1a9bf`](https://github.com/nophead/NopSCADlib/commit/9c1a9bf3572c07a57b5bd1fde1d9a4aba14e5ea8 "show commit") [M.B.](# "Martin Budden") Add facility to orient `core_xy` with left motor being lower or upper motor.
+
+#### [v15.11.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.11.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.11.0...v15.11.1 "diff with v15.11.0")
+*   2021-04-25 [`feec1e7`](https://github.com/nophead/NopSCADlib/commit/feec1e7ae5a5217586e0ab9e7b002e8af8f7c749 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-04-25 [`be76af2`](https://github.com/nophead/NopSCADlib/commit/be76af2fc490e10e4dd115a56019e33005f87db9 "show commit") [M.B.](# "Martin Budden") Fixed typo in `leadnut.scad`.
+
+### [v15.11.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.11.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.10.1...v15.11.0 "diff with v15.10.1")
+*   2021-04-25 [`49fdfea`](https://github.com/nophead/NopSCADlib/commit/49fdfea7926d677b6e0a9eee2fbd928f2935e1eb "show commit") [C.P.](# "Chris Palmer") Added 35BYGHJ75 geared stepper.
+
+#### [v15.10.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.10.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.10.0...v15.10.1 "diff with v15.10.0")
+*   2021-04-25 [`ac0bacf`](https://github.com/nophead/NopSCADlib/commit/ac0bacfeda43af62256e7bd3184df695b3e01d37 "show commit") [C.P.](# "Chris Palmer") Removed echo in rails test.
+
+### [v15.10.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.10.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.9.0...v15.10.0 "diff with v15.9.0")
+*   2021-04-13 [`e379fa8`](https://github.com/nophead/NopSCADlib/commit/e379fa8ada4a4089fc24ce5fc2c140a2531e2e95 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-04-13 [`5fbff06`](https://github.com/nophead/NopSCADlib/commit/5fbff060b019a983eba93eb8c5b16adfb6a3f7ee "show commit") [M.B.](# "Martin Budden") Added a `pcb_component` function.
+
+### [v15.9.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.9.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.8.0...v15.9.0 "diff with v15.8.0")
+*   2021-04-13 [`edc0b86`](https://github.com/nophead/NopSCADlib/commit/edc0b86bb1cd52e90fe353c4aea9539e95aa5aee "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2021-03-31 [`b70c2f9`](https://github.com/nophead/NopSCADlib/commit/b70c2f993c351bf71da57cfc169ed02a235cf4f3 "show commit") [M.B.](# "Martin Budden") Added box sections.
+
+### [v15.8.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.8.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.7.0...v15.8.0 "diff with v15.7.0")
+*   2021-04-12 [`145c5d9`](https://github.com/nophead/NopSCADlib/commit/145c5d9b1a7c873940abf266a321edabdff3b7a0 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-04-12 [`1efed64`](https://github.com/nophead/NopSCADlib/commit/1efed649cf54607b9d39d4b7f422dd385ccb441f "show commit") [M.B.](# "Martin Budden") Added PSU size function.
+
+### [v15.7.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.7.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.6.1...v15.7.0 "diff with v15.6.1")
+*   2021-04-12 [`3f31607`](https://github.com/nophead/NopSCADlib/commit/3f31607840d162f63d12eb2317d2f28af1ecf492 "show commit") [C.P.](# "Chris Palmer") Added No8 screws.
+
+#### [v15.6.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.6.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.6.0...v15.6.1 "diff with v15.6.0")
+*   2021-04-05 [`f12b36e`](https://github.com/nophead/NopSCADlib/commit/f12b36ea046b5a784dd81b3c4e95eaf4cf24a58d "show commit") [C.P.](# "Chris Palmer") Corrected MGN12 rail end value.
+Added assert for rail end value too big.
+
+### [v15.6.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.6.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.5.0...v15.6.0 "diff with v15.5.0")
+*   2021-04-03 [`51cc2fd`](https://github.com/nophead/NopSCADlib/commit/51cc2fd6791065e1c94c761abf7dac0271e6ab28 "show commit") [C.P.](# "Chris Palmer") Carriages now appear on the BOM and both variants are shown in the rail test.
+
+*   2021-03-31 [`608168d`](https://github.com/nophead/NopSCADlib/commit/608168de8e56bfdde5ba605d27baca1900895926 "show commit") [M.B.](# "Martin Budden") Added MGN7H and MGN9H carriages.
+
+### [v15.5.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.5.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.4.0...v15.5.0 "diff with v15.4.0")
+*   2021-04-02 [`cc794cd`](https://github.com/nophead/NopSCADlib/commit/cc794cd7c3cd3e3f63d15ebbe5dabb773812ae72 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-03-31 [`fc45a40`](https://github.com/nophead/NopSCADlib/commit/fc45a40bd3c3b524d9edc226952482296e776831 "show commit") [M.B.](# "Martin Budden") Added translated children to pulley.
+
+### [v15.4.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.4.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.3.1...v15.4.0 "diff with v15.3.1")
+*   2021-04-02 [`b2d712b`](https://github.com/nophead/NopSCADlib/commit/b2d712bca94165a338e5f904880d12f9c4c5ecd0 "show commit") [C.P.](# "Chris Palmer") Added `quadratic_real_roots()` and `cubic_real_roots()`.
+
+#### [v15.3.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.3.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.3.0...v15.3.1 "diff with v15.3.0")
+*   2021-04-02 [`f3376ed`](https://github.com/nophead/NopSCADlib/commit/f3376edaf186b32f442b94d6d0b42f1ba0c7612c "show commit") [C.P.](# "Chris Palmer") Documented `xor()` function.
+
+### [v15.3.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.3.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.2.0...v15.3.0 "diff with v15.2.0")
+*   2021-04-02 [`c073419`](https://github.com/nophead/NopSCADlib/commit/c073419c0b4eddcda4cda5bd0f8d48268b6e58ec "show commit") [C.P.](# "Chris Palmer") Added `opengrab_screw_depth()` function.
+
+### [v15.2.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.2.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.1.1...v15.2.0 "diff with v15.1.1")
+*   2021-03-22 [`ca1b34e`](https://github.com/nophead/NopSCADlib/commit/ca1b34e9cad5d82bd878fa4ebf439c0fbdad7f77 "show commit") [C.P.](# "Chris Palmer") Added `sink` parameter to `screw_polysink()` to recess the head.
+
 #### [v15.1.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.1.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.1.0...v15.1.1 "diff with v15.1.0")
 *   2021-03-22 [`cbab9ce`](https://github.com/nophead/NopSCADlib/commit/cbab9cea028a204032a91729597572a39ed893a2 "show commit") [C.P.](# "Chris Palmer") Fixed `M6_cs_cap_screw`.
 

docs/usage.md

@@ -270,6 +270,22 @@ The target config file is selected by generating `target.scad` that includes `co
 The rest of the project includes `target.scad` to use the configuration.
 Additionally all the generated file directories (assemblies, bom, stls, dxfs, etc.) are placed in a sub-directory called `<target_name>`.
 
+The build system will look for a `<target_name>_assembly` module and use it as the top level module instead of `main_assembly` if it it exists.
+That allows the project description to be target specific if the top level modules are in different scad files.
+The top level assembly instructions and assembly contents could also be different if appropriate.
+
+If the top level module is just a shell wrapper that simply includes one other assembly, with no additional parts, then it is removed from the build instructions and
+the assembly it calls becomes the top level. This allows a different project description for each target but only one set of top level instructions without repeating them.
+
+### Costed BOMs
+
+A costed bill of materials can be made by opening the generated file `bom/bom.csv` in a spreadsheet program using a single quote as the string delimiter and comma as the field separator.
+That gets a list of part descriptions and quantities to which prices can be added to get the total cost and perhaps a URL of where to buy each part.
+
+If a Python file called `parts.py` is found then `bom.py` will attempt to call functions for each part to get a price and URL.
+Any functions not found are printed, so you can see the format expected.
+The function are passed the quantity to allow them to calculate volume discounts, etc.
+
 ### Other libraries
 
 The build scripts need to be able to locate the source files where the modules to generate the STL files and assemblies reside. They will search all the scad files

examples/MainsBreakOutBox/bom/bom.csv

@@ -0,0 +1,16 @@
+'Ferrule for 1.5mm^2 wire - not shown',  3
+'Wire blue 30/0.25mm strands, length 150mm - not shown',  2
+'Wire brown 30/0.25mm strands, length 150mm - not shown',  2
+'Wire green & yellow 30/0.25mm strands, length 150mm - not shown',  2
+'IEC inlet for ATX',  1
+'Heatfit insert M3',  2
+'4mm shielded jack socket blue',  2
+'4mm shielded jack socket brown',  1
+'4mm shielded jack socket green',  2
+'Mains socket 13A',  1
+'Nut M3 x 2.4mm nyloc',  6
+'Screw M3 cs cap x 12mm',  2
+'Screw M3 cs cap x 20mm',  2
+'Screw M3 dome x 10mm',  4
+'Heatshrink sleeving ID 3.2mm x 15mm - not shown',  8
+'Washer  M3 x 7mm x 0.5mm', 10

global_defs.scad

@@ -27,15 +27,16 @@
 //  Setting $_bom in the local file overrides it in the local file but not in the libs.
 //
 rr_green = [0, 146/255, 0];                                               // RepRap logo colour
+crimson  = [220/255, 20/255, 60/255];
 
 $_bom           = is_undef($bom)             ? 0      : $bom;             // 0 no bom, 1 assemblies and stls, 2 vitamins as well
 $exploded       = is_undef($explode)         ? 0      : $explode;         // 1 for exploded view
-layer_height    = is_undef($layer_height)    ? 0.25   : $layer_height;    // layer heigth when printing
+layer_height    = is_undef($layer_height)    ? 0.25   : $layer_height;    // layer height when printing
 extrusion_width = is_undef($extrusion_width) ? 0.5    : $extrusion_width; // filament width when printing
 nozzle          = is_undef($nozzle)          ? 0.45   : $nozzle;          // 3D printer nozzle
 cnc_bit_r       = is_undef($cnc_bit_r)       ? 1.2    : $cnc_bit_r;       // minimum tool radius when milling 2D objects
 pp1_colour      = is_undef($pp1_colour)      ? rr_green : $pp1_colour;    // printed part colour 1, RepRap logo colour
-pp2_colour      = is_undef($pp2_colour)      ? "Crimson"  : $pp2_colour;  // printed part colour 2
+pp2_colour      = is_undef($pp2_colour)      ? crimson : $pp2_colour;     // printed part colour 2
 pp3_colour      = is_undef($pp3_colour)      ? "SteelBlue" : $pp3_colour; // printed part colour 3
 pp4_colour      = is_undef($pp4_colour)      ? "darkorange" : $pp4_colour;// printed part colour 4
 show_rays       = is_undef($show_rays)       ? false  : $show_rays;       // show camera sight lines and light direction

lib.scad

@@ -28,6 +28,8 @@ include <vitamins/pcbs.scad>
 include <vitamins/batteries.scad>
 include <vitamins/bearing_blocks.scad>
 include <vitamins/blowers.scad>
+include <vitamins/bldc_motors.scad>
+include <vitamins/box_sections.scad>
 include <vitamins/bulldogs.scad>
 include <vitamins/buttons.scad>
 include <vitamins/cameras.scad>

libtest.scad

@@ -45,7 +45,9 @@ use <tests/ball_bearings.scad>
 use <tests/batteries.scad>
 use <tests/bearing_blocks.scad>
 use <tests/belts.scad>
+use <tests/BLDC_motors.scad>
 use <tests/blowers.scad>
+use <tests/box_sections.scad>
 use <tests/bulldogs.scad>
 use <tests/buttons.scad>
 use <tests/cable_strips.scad>
@@ -368,10 +370,10 @@ extrusions_y = panel_meters_y + 80;
 translate([x3, veroboard_y])
     veroboard_test();
 
-translate([x3 + 70, veroboard_y + 30])
+translate([x3 + 60, veroboard_y + 20])
     geared_steppers();
 
-translate([x3 + 140, veroboard_y + 20])
+translate([x3 + 160, ssrs_y])
     pcb_mounts();
 
 translate([x3 + 170, veroboard_y + 16])
@@ -426,6 +428,9 @@ extrusion_brackets_y = rails_y + 250;
 sk_brackets_y = extrusion_brackets_y + 80;
 kp_pillow_blocks_y = sk_brackets_y + 50;
 scs_bearing_blocks_y = kp_pillow_blocks_y + 60;
+cable_strip_y = fans_y + 50;
+box_sections_y = cable_strip_y;
+BLDC_y = sheets_y;
 
 translate([x4 + 200, belts_y + 58]) {
     belt_test();
@@ -441,7 +446,7 @@ translate([x4 + 175, belts_y, -20])
 translate([x4, rails_y + 130])
     rails();
 
-translate([770, fans_y + 50])
+translate([770, cable_strip_y])
     cable_strips();
 
 translate([x4, kp_pillow_blocks_y])
@@ -459,6 +464,11 @@ translate([x4 + 120, extrusion_brackets_y])
 translate([x4, scs_bearing_blocks_y])
     scs_bearing_blocks();
 
+translate([x4, BLDC_y])
+    bldc_motors();
+
+translate([x6, box_sections_y])
+    box_sections();
 
 translate([x6, 125])
     light_strips();

readme.md

@@ -20,32 +20,32 @@ A list of changes classified as breaking, additions or fixes is maintained in [C
 
 ## Table of Contents<a name="top"/>
 <table><tr>
-<th align="left"> Vitamins A-I </th><th align="left"> Vitamins J-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
-<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
-<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
-<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
-<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
-<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
-<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
-<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<th align="left"> Vitamins A-H </th><th align="left"> Vitamins I-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
+<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
+<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
+<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
+<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
+<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
+<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
+<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
+<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
 </table>
 
 ---
@@ -334,6 +334,73 @@ Individual teeth are not drawn, instead they are represented by a lighter colour
 |   6 | `screw(M3_grub_screw, 6)` |  Screw M3 grub x  6mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="BLDC_motors"></a>
+## BLDC_motors
+ Brushless DC electric motor
+
+[vitamins/bldc_motors.scad](vitamins/bldc_motors.scad) Object definitions.
+
+[vitamins/bldc_motor.scad](vitamins/bldc_motor.scad) Implementation.
+
+[tests/BLDC_motors.scad](tests/BLDC_motors.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `BLDC_base_diameter(type)` | Base diameter |
+| `BLDC_base_height_1(type)` | Base height 1 |
+| `BLDC_base_height_2(type)` | Base height 2 |
+| `BLDC_base_hole_diameter(type)` | Base hole diameter |
+| `BLDC_base_holes(type)` | Base holes |
+| `BLDC_base_open(type)` | Base open |
+| `BLDC_bell_diameter(type)` | Bell diameter |
+| `BLDC_bell_height_1(type)` | Bell height 1 |
+| `BLDC_bell_height_2(type)` | Bell height 2 |
+| `BLDC_bell_hole_diameter(type)` | Bell hole diameter |
+| `BLDC_bell_holes(type)` | Bell holes |
+| `BLDC_bell_spokes(type)` | Bell spoke count |
+| `BLDC_body_colour(type)` | Body colour |
+| `BLDC_boss_diameter(type)` | Boss diameter |
+| `BLDC_boss_height(type)` | Boss height |
+| `BLDC_diameter(type)` | Diameter of motor |
+| `BLDC_height(type)` | Height of motor including boss, if any, but excluding prop shaft |
+| `BLDC_prop_shaft_diameter(type)` | Diameter of unthreaded portion of prop shaft |
+| `BLDC_prop_shaft_length(type)` | Prop shaft length, including threaded section |
+| `BLDC_prop_shaft_thread_diameter(type)` | Diameter of threaded section of prop shaft |
+| `BLDC_prop_shaft_thread_length(type)` | Length of threaded section of prop shaft |
+| `BLDC_shaft_diameter(type)` | shaft diameter |
+| `BLDC_shaft_length(type)` | Total shaft length |
+| `BLDC_shaft_offset(type)` | shaft offset from base |
+| `BLDC_side_colour(type)` | Side colour |
+| `BLDC_wire_diameter(type)` | Wire diameter |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `BLDC(type)` | Draw specified BLDC motor |
+| `BLDC_base_screw_positions(type, n = 4)` | Positions children at the base screw holes |
+| `BLDC_bell_screw_positions(type, n = 4)` | Positions children at the bell screw holes |
+| `BLDC_screw_positions(holes, n = 4)` | Screw positions utility function |
+
+![bldc_motors](tests/png/bldc_motors.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `BLDC(BLDC0603)` |  Brushless DC motor BLDC0603 |
+|   1 | `BLDC(BLDC0802)` |  Brushless DC motor BLDC0802 |
+|   1 | `BLDC(BLDC1105)` |  Brushless DC motor BLDC1105 |
+|   1 | `BLDC(BLDC1306)` |  Brushless DC motor BLDC1306 |
+|   1 | `BLDC(BLDC1804)` |  Brushless DC motor BLDC1804 |
+|   1 | `BLDC(BLDC2205)` |  Brushless DC motor BLDC2205 |
+|   1 | `BLDC(BLDC2212)` |  Brushless DC motor BLDC2212 |
+|   1 | `BLDC(BLDC3548)` |  Brushless DC motor BLDC3548 |
+|   1 | `BLDC(BLDC4250)` |  Brushless DC motor BLDC4250 |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -373,6 +440,7 @@ Models of radial blowers.
 |:--- |:--- |
 | `blower_casing_is_square(type)` | True for square radial fans, false for spiral shape radial blowers |
 | `blower_exit_offset(type)` | Offset of exit's centre from the edge |
+| `blower_size(type)` | Size |
 
 ### Modules
 | Module | Description |
@@ -399,6 +467,44 @@ Models of radial blowers.
 |   2 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Box_sections"></a>
+## Box_sections
+Box sections.
+
+[vitamins/box_sections.scad](vitamins/box_sections.scad) Object definitions.
+
+[vitamins/box_section.scad](vitamins/box_section.scad) Implementation.
+
+[tests/box_sections.scad](tests/box_sections.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `box_section_colour(type)` | Colour |
+| `box_section_colour2(type)` | Colour2, for woven box section |
+| `box_section_fillet(type)` | Fillet |
+| `box_section_material(type)` | Material description |
+| `box_section_size(type)` | Size |
+| `box_section_thickness(type)` | Wall thickness |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `box_section_is_woven(type)` | Box section is woven, eg carbon fiber |
+
+![box_sections](tests/png/box_sections.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `box_section(AL12x8x1, 100)` |  Aluminium rectangular box section 12mm x 8mm x 1mm, length 100mm |
+|   1 | `box_section(AL20x20x2, 100)` |  Aluminium rectangular box section 20mm x 20mm x 2mm, length 100mm |
+|   1 | `box_section(CF10x10x1, 100)` |  Carbon fiber rectangular box section 10mm x 10mm x 1mm, length 100mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -1053,23 +1159,23 @@ Geared tin can steppers
 |:--- |:--- |
 | `gs_boss_d(type)` | Boss around the shaft diameter |
 | `gs_boss_h(type)` | Boss around the shaft height |
-| `gs_bulge2_d(type)` | Plastic rear bulge depth from centre |
-| `gs_bulge2_h(type)` | Plastic rear bulge height |
-| `gs_bulge2_w(type)` | Plastic rear bulge width |
-| `gs_bulge_d(type)` | Plastic bulge depth from centre |
-| `gs_bulge_h(type)` | Plastic bulge height |
-| `gs_bulge_w(type)` | Plastic bulge width |
+| `gs_bulge(type)` | Plastic bulge width, depth, height, z offset |
+| `gs_bulge2(type)` | Plastic rear bulge width, depth, height |
 | `gs_diameter(type)` | Can diameter |
 | `gs_flat_length(type)` | Shaft flat length |
 | `gs_height(type)` | Can height |
 | `gs_hole_d(type)` | Screw hole diameter |
 | `gs_lug_t(type)` | Screw lug thickness |
 | `gs_lug_w(type)` | Screw lug width |
+| `gs_motor(type)` | Motor diameter and height if separate from gearbox |
 | `gs_offset(type)` | Offset of the shaft from the centre of the can |
 | `gs_pitch(type)` | Screw pitch |
+| `gs_radius(type)` | Top - or bottom + corner radius |
 | `gs_shaft_d(type)` | Shaft diameter |
 | `gs_shaft_flat(type)` | Shaft width across the flats |
 | `gs_shaft_length(type)` | Shaft length |
+| `gs_wire_d(type)` | Wire diameter |
+| `gs_wires(type)` | Wire colours and grouping |
 
 ### Modules
 | Module | Description |
@@ -1083,6 +1189,7 @@ Geared tin can steppers
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | `geared_stepper(28BYJ_48)` |  Geared stepper - 28BYJ-48 5V |
+|   1 | `geared_stepper(35BYGHJ75)` |  Geared stepper - 35BYGHJ75 0.4A |
 
 
 <a href="#top">Top</a>
@@ -1196,7 +1303,7 @@ Needs updating as mostly obsolete versions.
 |   1 |  |  Tape self amalgamating silicone 110mm x 25mm |
 |   1 | `resistor(Epcos)` |  Thermistor Epcos B57560G104F 100K 1% - not shown |
 |   2 |  |  Wire Red PTFE 16/0.2mm strands, length 170mm |
-|   4 | `ziptie(small_ziptie, 8)` |  Ziptie 2.5mm x 100mm min length |
+|   4 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -1289,7 +1396,7 @@ IEC mains inlets and outlet.
 |   1 | `iec(IEC_inlet)` |  IEC inlet |
 |   1 | `iec(IEC_inlet_atx)` |  IEC inlet for ATX |
 |   1 | `iec(IEC_outlet)` |  IEC outlet RS 811-7193 |
-|   1 | `iec(IEC_switched_fused_inlet)` |  IEC320 C14 switched fused inlet module |
+|   1 | `iec(IEC_320_C14_switched_fused_inlet)` |  IEC320 C14 switched fused inlet module |
 |  12 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   4 | `screw(M3_cs_cap_screw, 10)` |  Screw M3 cs cap x 10mm |
 |   8 | `screw(M3_cs_cap_screw, 12)` |  Screw M3 cs cap x 12mm |
@@ -1445,7 +1552,7 @@ Nuts for leadscrews.
 | `leadnut_flange_t(type)` | Flange thickness |
 | `leadnut_height(type)` | Total height |
 | `leadnut_hole_dia(type)` | The diameter of the screw holes |
-| `leadnut_hole_pitch(type)` | The radia pitch of the screw holes |
+| `leadnut_hole_pitch(type)` | The radial pitch of the screw holes |
 | `leadnut_holes(type)` | The number of screw holes |
 | `leadnut_lead(type)` | Screw lead |
 | `leadnut_od(type)` | Outer diameter of the shank |
@@ -2030,6 +2137,7 @@ A permanent magnet that can be magnatized and de-magnatized electronically.
 | `opengrab_depth()` | Module height |
 | `opengrab_pcb()` | The PCB |
 | `opengrab_pcb_z()` | PCB offset from the front |
+| `opengrab_screw_depth()` | Max screw depth in pillars |
 | `opengrab_target_thickness()` | Target sheet thickness |
 | `opengrab_width()` | Module width |
 
@@ -2156,6 +2264,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| `pcb_component(type, name, index = 0)` | Return the component specified by name and index |
 | `pcb_component_position(type, name, index = 0)` | Return x y position of specified component |
 | `pcb_coord(type, p)` | Convert offsets from the edge to coordinates relative to the centre |
 | `pcb_grid_pos(type, x, y, z = 0)` | Returns a pcb grid position |
@@ -2292,6 +2401,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| `pcb_component(type, name, index = 0)` | Return the component specified by name and index |
 | `pcb_component_position(type, name, index = 0)` | Return x y position of specified component |
 | `pcb_coord(type, p)` | Convert offsets from the edge to coordinates relative to the centre |
 | `pcb_grid_pos(type, x, y, z = 0)` | Returns a pcb grid position |
@@ -2626,6 +2736,7 @@ Face order is bottom, top, left, right, front, back.
 | Function | Description |
 |:--- |:--- |
 | `psu_face_transform(type, face)` | Returns a transformation matrix to get to the specified face |
+| `psu_size(type)` | Size |
 | `terminal_block_length(type, ways)` | Total length of terminal block |
 
 ### Modules
@@ -2698,7 +2809,7 @@ Timing belt pulleys, both toothed and plain with internal bearings for idlers.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `pulley(type, colour = silver)` | Draw a pulley |
+| `pulley(type, colour = silver)` | Draw a pulley, any children are placed above. |
 | `pulley_assembly(type, colour = silver)` | Draw a pulley with its grub screws in place |
 
 ![pulleys](tests/png/pulleys.png)
@@ -2785,26 +2896,35 @@ Linear rails with carriages.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   2 | `rail(MGN12, 200)` |  Linear rail MGN12 x 200mm |
+|   1 | `rail(MGN12, 200)` |  Linear rail MGN12 x 200mm |
 |   1 | `rail(MGN15, 200)` |  Linear rail MGN15 x 200mm |
 |   1 | `rail(MGN5, 200)` |  Linear rail MGN5 x 200mm |
 |   1 | `rail(MGN7, 200)` |  Linear rail MGN7 x 200mm |
 |   1 | `rail(MGN9, 200)` |  Linear rail MGN9 x 200mm |
 |   1 | `rail(SSR15, 200)` |  Linear rail SSR15 x 200mm |
+|   1 | `carriage(MGN12C_carriage)` |  Linear rail carriage MGN12C |
+|   1 | `carriage(MGN12H_carriage)` |  Linear rail carriage MGN12H |
+|   1 | `carriage(MGN15C_carriage)` |  Linear rail carriage MGN15C |
+|   1 | `carriage(MGN5C_carriage)` |  Linear rail carriage MGN5C |
+|   1 | `carriage(MGN7C_carriage)` |  Linear rail carriage MGN7C |
+|   1 | `carriage(MGN7H_carriage)` |  Linear rail carriage MGN7H |
+|   1 | `carriage(MGN9C_carriage)` |  Linear rail carriage MGN9C |
+|   1 | `carriage(MGN9H_carriage)` |  Linear rail carriage MGN9H |
+|   1 | `carriage(SSR15_carriage)` |  Linear rail carriage SSR15 |
 |  26 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
-|  31 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
+|  23 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   4 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
 |  11 | `screw(M2_cap_screw, 10)` |  Screw M2 cap x 10mm |
 |  15 | `screw(M2_cs_cap_screw, 10)` |  Screw M2 cs cap x 10mm |
 |   8 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
-|  12 | `screw(M3_cap_screw, 12)` |  Screw M3 cap x 12mm |
+|   6 | `screw(M3_cap_screw, 12)` |  Screw M3 cap x 12mm |
 |   3 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
 |   2 | `screw(M3_cs_cap_screw, 12)` |  Screw M3 cs cap x 12mm |
-|   6 | `screw(M3_cs_cap_screw, 16)` |  Screw M3 cs cap x 16mm |
+|   4 | `screw(M3_cs_cap_screw, 16)` |  Screw M3 cs cap x 16mm |
 |   2 | `screw(M4_cap_screw, 16)` |  Screw M4 cap x 16mm |
 |   2 | `screw(M4_cs_cap_screw, 20)` |  Screw M4 cs cap x 20mm |
 |  26 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
-|  31 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+|  23 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   4 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 
 
@@ -3046,6 +3166,7 @@ For an explanation of `screw_polysink()` see <https://hydraraptor.blogspot.com/2
 |   1 | `screw(No4_screw, 10)` |  Screw No4 pan wood x 10mm |
 |   1 | `screw(No6_cs_screw, 30)` |  Screw No6 cs wood x 30mm |
 |   1 | `screw(No6_screw, 30)` |  Screw No6 pan wood x 30mm |
+|   1 | `screw(No8_screw, 30)` |  Screw No8 pan wood x 30mm |
 
 ### Printed
 | Qty | Filename |
@@ -3990,7 +4111,7 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 |   1 |  |  Wire orange 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire red 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire yellow 7/0.2mm strands, length 90mm |
-|   1 | `ziptie(small_ziptie, 2.1)` |  Ziptie 2.5mm x 100mm min length |
+|   1 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -4018,16 +4139,16 @@ Cable zipties.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `ziptie(type, r, t = 0)` | Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t` |
+| `ziptie(type, r = 5, t = 0)` | Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t` |
 
 ![zipties](tests/png/zipties.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `ziptie(small_ziptie, 5)` |  Ziptie 2.5mm x 100mm min length |
-|   1 | `ziptie(ziptie_3p6mm, 5)` |  Ziptie 3.6mm x 100mm min length |
-|   1 | `ziptie(ziptie_3mm, 5)` |  Ziptie 3mm x 100mm min length |
+|   1 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
+|   1 | `ziptie(ziptie_3p6mm)` |  Ziptie 3.6mm x 100mm min length |
+|   1 | `ziptie(ziptie_3mm)` |  Ziptie 3mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -5237,7 +5358,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 |   6 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   6 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   6 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
-|   3 | `ziptie(small_ziptie, 3)` |  Ziptie 2.5mm x 100mm min length |
+|   3 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |
@@ -5439,7 +5560,7 @@ The STL and assembly must be given a name and parameterless wrappers for the stl
 |   4 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   4 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   4 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
-|   4 | `ziptie(small_ziptie, 3)` |  Ziptie 2.5mm x 100mm min length |
+|   4 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |
@@ -5632,8 +5753,8 @@ allows flexible positioning of the motors.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false)` | Wrapper module to draw both belts of a coreXY setup |
-| `coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false)` | Draw the coreXY belts |
+| `coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false, left_lower = false)` | Wrapper module to draw both belts of a coreXY setup |
+| `coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false, left_lower = false)` | Draw the coreXY belts |
 | `coreXY_half(type, size, pos, separation_y = 0, x_gap = 0, plain_idler_offset = 0, drive_pulley_offset = [0, 0], show_pulleys = false, lower_belt = false, hflip = false)` | Draw one belt of a coreXY setup |
 
 ![core_xy](tests/png/core_xy.png)
@@ -5833,6 +5954,7 @@ Maths utilities for manipulating vectors and matrices.
 | `circle_intersect(c1, r1, c2, r2)` | Calculate one point where two circles in the X-Z plane intersect, clockwise around c1 |
 | `cosh(x)` | hyperbolic cosine |
 | `coth(x)` | hyperbolic cotangent |
+| `cubic_real_roots(a, b, c, d)` | Returns real roots of cubic equation |
 | `degrees(radians)` | Convert degrees to radians |
 | `euler(R)` | Convert a rotation matrix to a Euler rotation vector. |
 | `identity(n, x = 1)` | Construct an arbitrary size identity matrix |
@@ -5840,6 +5962,7 @@ Maths utilities for manipulating vectors and matrices.
 | `map(v, func)` | make a new vector where the func function argument is applied to each element of the vector v |
 | `mapi(v, func)` | make a new vector where the func function argument is applied to each element of the vector v. The func will get the index number as first argument, and the element as second argument. |
 | `nearly_zero(x)` | True if x is close to zero |
+| `quadratic_real_roots(a, b, c)` | Returns real roots of a quadratic equation, biggest first. Returns empty list if no real roots |
 | `radians(degrees)` | Convert radians to degrees |
 | `reduce(v, func, unity)` | reduce a vector v to a single entity by applying the func function recursively to the reduced value so far and the next element, starting with unity as the initial reduced value |
 | `reverse(v)` | Reverse a vector |
@@ -5862,6 +5985,7 @@ Maths utilities for manipulating vectors and matrices.
 | `vec2(v)` | Return a 2 vector with the first two elements of `v` |
 | `vec3(v)` | Return a 3 vector with the first three elements of `v` |
 | `vec4(v)` | Return a 4 vector with the first three elements of `v` |
+| `xor(a,b)` | Logical exclusive OR |
 
 ### Modules
 | Module | Description |

scripts/bom.py

@@ -31,6 +31,12 @@ from set_config import *
 import json
 import re
 
+try:
+    import parts
+    got_parts_py = True
+except:
+    got_parts_py = False
+
 def find_scad_file(mname):
     for filename in os.listdir(source_dir):
         if filename[-5:] == ".scad":
@@ -46,6 +52,18 @@ def find_scad_file(mname):
                             return filename
     return None
 
+def main_assembly(target):
+    file = None
+    if target:
+        assembly = target + "_assembly"
+        file = find_scad_file(assembly)
+    if not file:
+        assembly = "main_assembly"
+        file = find_scad_file(assembly)
+    if not file:
+        raise Exception("can't find source for " + assembly)
+    return assembly, file
+
 class Part:
     def __init__(self, args):
         self.count = 1
@@ -117,6 +135,33 @@ class BOM:
             return ass
         return ass.replace("assembly", "assemblies")
 
+    def print_CSV(self,  file = None):
+        i = 0
+        for part in sorted(self.vitamins):
+            i += 1
+            if ': ' in part:
+                part_no, description = part.split(': ')
+            else:
+                part_no, description = "", part
+            qty = self.vitamins[part].count
+            if got_parts_py:
+                match = re.match(r'^.*\((.*?)[,\)].*$', part_no)
+                if match and not match.group(1).startswith('"'):
+                    part_no = part_no.replace('(' + match.group(1), '_' + match.group(1) + '(').replace('(, ', '(')
+                func = 'parts.' + part_no.replace('(', '(%d, ' % qty).replace(', )', ')')
+                func = func.replace('true',  'True').replace('false', 'False').replace('undef', 'None')
+                try:
+                    price, url = eval(func)
+                    print("'%s',%3d,%.2f,'=B%d*C%d',%s" % (description, qty, price, i, i, url), file=file)
+                except:
+                    if part_no:
+                        print("%s not found in parts.py" % func)
+                    print("'%s',%3d" % (description, qty), file=file)
+            else:
+                print("'%s',%3d" % (description, qty), file=file)
+        if got_parts_py:
+            print(",'=SUM(B1:B%d)',,'=SUM(D1:D%d)'" %(i, i), file=file)
+
     def print_bom(self, breakdown, file = None):
         if self.vitamins:
             print("Vitamins:", file=file)
@@ -221,28 +266,20 @@ def parse_bom(file = "openscad.log", name = None):
     return main
 
 def usage():
-    print("\nusage:\n\tbom [target_config] [<accessory_name>_assembly] - Generate BOMs for a project or an accessory to a project.")
+    print("\nusage:\n\tbom [target_config] - Generate BOMs for a project.")
     sys.exit(1)
 
-def boms(target = None, assembly = None):
+def boms(target = None):
     try:
         bom_dir = set_config(target, usage) + "bom"
-        if assembly:
-            bom_dir += "/accessories"
-            if not os.path.isdir(bom_dir):
-                os.makedirs(bom_dir)
-        else:
-            assembly = "main_assembly"
-            if os.path.isdir(bom_dir):
-                shutil.rmtree(bom_dir)
-                sleep(0.1)
-            os.makedirs(bom_dir)
+        if os.path.isdir(bom_dir):
+            shutil.rmtree(bom_dir)
+            sleep(0.1)
+        os.makedirs(bom_dir)
         #
-        # Find the scad file that makes the module
+        # Find the scad file that makes the main assembly
         #
-        scad_file = find_scad_file(assembly)
-        if not scad_file:
-            raise Exception("can't find source for " + assembly)
+        assembly, scad_file = main_assembly(target)
         #
         # make a file to use the module
         #
@@ -259,8 +296,9 @@ def boms(target = None, assembly = None):
 
         main = parse_bom("openscad.echo", assembly)
 
-        if assembly == "main_assembly":
-            main.print_bom(True, open(bom_dir + "/bom.txt","wt"))
+        main.print_bom(True, open(bom_dir + "/bom.txt","wt"))
+
+        main.print_CSV(open(bom_dir + "/bom.csv","wt"))
 
         for ass in main.assemblies:
             with open(bom_dir + "/" + ass + ".txt", "wt") as f:
@@ -278,20 +316,8 @@ def boms(target = None, assembly = None):
         sys.exit(1)
 
 if __name__ == '__main__':
-    if len(sys.argv) > 3: usage()
+    if len(sys.argv) > 2: usage()
 
-    if len(sys.argv) == 3:
-        target, assembly = sys.argv[1], sys.argv[2]
-    else:
-        if len(sys.argv) == 2:
-            if sys.argv[1][-9:] == "_assembly":
-                target, assembly = None, sys.argv[1]
-            else:
-                target, assembly = sys.argv[1], None
-        else:
-            target, assembly = None, None
+    target = sys.argv[1] if len(sys.argv) == 2 else None
 
-    if assembly:
-        if assembly[-9:] != "_assembly": usage()
-
-    boms(target, assembly)
+    boms(target)

scripts/tests.py

@@ -173,7 +173,7 @@ def tests(tests):
                     impl_name = None
 
             if libtest:
-                vsplit = "AJR" + chr(ord('Z') + 1)
+                vsplit = "AIR" + chr(ord('Z') + 1)
                 vtype = locations[0][1]
                 types = [vtype + ' ' + vsplit[i] + '-' + chr(ord(vsplit[i + 1]) - 1) for i in range(len(vsplit) - 1)] + [loc[1] for loc in locations[1 :]]
                 if type == vtype:

scripts/views.py

@@ -161,6 +161,7 @@ def views(target, do_assemblies = None):
     # Find all the scad files
     #
     main_blurb = None
+    main_assembly, main_file = bom.main_assembly(target)
     pngs = []
     for dir in source_dirs(bom_dir):
         if os.path.isdir(dir):
@@ -232,7 +233,7 @@ def views(target, do_assemblies = None):
                                                 update_image(tmp_name, tn_name)
                                     done_assemblies.append(real_name)
                                 else:
-                                    if module == 'main_assembly':
+                                    if module == main_assembly:
                                         main_blurb = blurb.scrape_module_blurb(lines[:line_no])
                         line_no += 1
     #
@@ -246,9 +247,6 @@ def views(target, do_assemblies = None):
         project = ' '.join(word[0].upper() + word[1:] for word in os.path.basename(os.getcwd()).split('_'))
         print('<a name="TOP"></a>', file = doc_file)
         print('# %s' % project, file = doc_file)
-        main_file = bom.find_scad_file('main_assembly')
-        if not main_file:
-            raise Exception("can't find source for main_assembly")
         text = blurb.scrape_blurb(source_dir + '/' + main_file)
         blurbs = blurb.split_blurb(text)
         if len(text):

tests/BLDC_motors.scad

@@ -0,0 +1,31 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/bldc_motors.scad>
+
+module bldc_motors()
+    layout([for(b = bldc_motors) BLDC_diameter(b)])
+        rotate(-90)
+            BLDC(bldc_motors[$i]);
+
+if($preview)
+    let($show_threads = 1)
+        bldc_motors();

tests/BOM.scad

@@ -20,10 +20,10 @@
 //
 //! BOM and assembly demonstration
 //
+$explode = 1; // Normally set on the command line when generating assembly views with views.py
 include <../core.scad>
 include <../vitamins/sheets.scad>
 use <../vitamins/insert.scad>
-$explode = 1; // Normally set on the command line when generating assembly views with views.py
 
 screw = M3_cap_screw;
 sheet = PMMA3;

tests/LDRs.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 include <../vitamins/ldrs.scad>
 
 use <../utils/layout.scad>

tests/ball_bearings.scad

@@ -16,7 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
-
+include <../core.scad>
 use <../utils/layout.scad>
 
 include <../vitamins/ball_bearings.scad>

tests/box_sections.scad

@@ -0,0 +1,30 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../utils/core/core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/box_sections.scad>
+
+module box_sections() {
+    layout([for(b = box_sections) box_section_size(b).x], 20)
+        box_section(box_sections[$i], 100);
+}
+
+if($preview)
+    box_sections();

tests/displays.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../utils/layout.scad>
 
 include <../vitamins/displays.scad>

tests/geared_steppers.scad

@@ -16,12 +16,13 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 include <../vitamins/geared_steppers.scad>
 
 use <../utils/layout.scad>
 
 module geared_steppers()
-    layout([for(g = geared_steppers) gs_diameter(g)], 5)
+    layout([for(g = geared_steppers) max(gs_diameter(g), gs_pitch(g) + gs_lug_w(g) / 2)], 5)
         geared_stepper(geared_steppers[$i]);
 
 geared_steppers();

tests/green_terminals.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../utils/layout.scad>
 
 include <../vitamins/green_terminals.scad>

tests/hygrometer.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../vitamins/hygrometer.scad>
 
 if($preview)

tests/microview.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../vitamins/microview.scad>
 
 microview(!$preview);

tests/o_ring.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../vitamins/o_ring.scad>
 
 module o_rings()

tests/press_fit.scad

@@ -16,8 +16,8 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
-
-include <../printed/press_fit.scad>
+include <../core.scad>
+use <../printed/press_fit.scad>
 
 module press_fits()
 {

tests/rails.scad

@@ -22,21 +22,28 @@ include <../vitamins/rails.scad>
 use <../utils/layout.scad>
 use <../vitamins/nut.scad>
 
+length = 200;
 sheet = 3;
 pos = 1; //[-1 : 0.1 : 1]
 
+function rail_carriages(rail) = [for(c = carriages) if(carriage_rail(c) == rail) c];
+
 module rails()
-    layout([for(l = carriages) carriage_width(l)], 20)
+    layout([for(r = rails) carriage_width(rail_carriages(r)[0])], 20)
         rotate(-90) {
-            carriage = carriages[$i];
-            rail = carriage_rail(carriage);
-            length = 200;
+            rail = rails[$i];
+            carriages = rail_carriages(rail);
+            carriage = carriages[0];
             screw = rail_screw(rail);
             nut = screw_nut(screw);
             washer = screw_washer(screw);
 
             rail_assembly(carriage, length, pos * carriage_travel(carriage, length) / 2, $i<2 ? grey(20) : "green", $i<2 ? grey(20) : "red");
 
+            if(len(carriages) > 1)
+                translate([-carriage_travel(carriages[1], length) / 2, 0])
+                    carriage(carriages[1]);
+
             rail_screws(rail, length, sheet + nut_thickness(nut, true) + washer_thickness(washer));
 
             rail_hole_positions(rail, length, 0)

utils/core_xy.scad

@@ -180,24 +180,25 @@ module coreXY_half(type, size, pos, separation_y = 0, x_gap = 0, plain_idler_off
         tooth_colour = lower_belt ? coreXY_lower_tooth_colour(type) : coreXY_upper_tooth_colour(type));
 }
 
-module coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false) { //! Wrapper module to draw both belts of a coreXY setup
+module coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false, left_lower = false) { //! Wrapper module to draw both belts of a coreXY setup
     translate([size.x / 2 - separation.x / 2, size.y / 2, -separation.z / 2]) {
         // lower belt
-        hflip()
+        hflip(!left_lower)
             explode(25)
-                coreXY_half(type, size, [size.x - pos.x - separation.x, pos.y], separation.y, x_gap, plain_idler_offset, [-lower_drive_pulley_offset.x, lower_drive_pulley_offset.y], show_pulleys, lower_belt = true, hflip = true);
+                coreXY_half(type, size, [size.x - pos.x - separation.x/2 - (left_lower ? x_gap : 0), pos.y], separation.y, x_gap, plain_idler_offset, [-lower_drive_pulley_offset.x, lower_drive_pulley_offset.y], show_pulleys, lower_belt = true, hflip = true);
 
         // upper belt
         translate([separation.x, 0, separation.z])
-            explode(25)
-                coreXY_half(type, size, [pos.x, pos.y], separation.y, x_gap, plain_idler_offset, upper_drive_pulley_offset, show_pulleys, lower_belt = false, hflip=false);
+            hflip(left_lower)
+                explode(25)
+                    coreXY_half(type, size, [pos.x + separation.x/2 + (left_lower ? x_gap : 0), pos.y], separation.y, x_gap, plain_idler_offset, upper_drive_pulley_offset, show_pulleys, lower_belt = false, hflip = false);
     }
 }
 
-module coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false) { //! Draw the coreXY belts
+module coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false, left_lower = false) { //! Draw the coreXY belts
     assert(coreXYPosBL.z == coreXYPosTR.z);
 
     coreXYSize = coreXYPosTR - coreXYPosBL;
     translate(coreXYPosBL)
-        coreXY(type, coreXYSize, [carriagePosition.x - coreXYPosBL.x + separation.x / 2, carriagePosition.y - coreXYPosBL.y], separation = separation, x_gap = x_gap, plain_idler_offset = 0, upper_drive_pulley_offset = upper_drive_pulley_offset, lower_drive_pulley_offset = lower_drive_pulley_offset, show_pulleys = show_pulleys);
+        coreXY(type, coreXYSize, [carriagePosition.x - coreXYPosBL.x, carriagePosition.y - coreXYPosBL.y], separation = separation, x_gap = x_gap, plain_idler_offset = 0, upper_drive_pulley_offset = upper_drive_pulley_offset, lower_drive_pulley_offset = lower_drive_pulley_offset, show_pulleys = show_pulleys, left_lower = left_lower);
 }

utils/maths.scad

@@ -160,4 +160,30 @@ function mapi(v, func) = [ for (i = [0:len(v)-1]) func(i,v[i]) ]; //! make a new
 function reduce(v, func, unity) = let ( r = function(i,val) i == len(v) ? val : r(i + 1, func(val, v[i])) ) r(0, unity); //! reduce a vector v to a single entity by applying the func function recursively to the reduced value so far and the next element, starting with unity as the initial reduced value
 function sumv(v) = reduce(v, function(a, b) a + b, 0); //! sum a vector of values that can be added with "+"
 
-function xor(a,b) = (a && !b) || (!a && b);
+function xor(a,b) = (a && !b) || (!a && b);     //! Logical exclusive OR
+function cuberoot(x)= sign(x)*abs(x)^(1/3);
+
+function quadratic_real_roots(a, b, c) =        //! Returns real roots of a quadratic equation, biggest first. Returns empty list if no real roots
+    let(2a = 2 * a,
+        2c = 2 * c,
+        det = b^2 - 2a * 2c
+    ) det < 0 ? [] :
+        let(r = sqrt(det),
+            x1 = b < 0 ? 2c / (-b + r) : (-b - r) / 2a,
+            x2 = b < 0 ? (-b + r) / 2a : 2c / (-b - r)
+        ) [x2, x1];
+
+function cubic_real_roots(a, b, c, d) = //! Returns real roots of cubic equation
+    let(b = b / a,
+        c = c / a,
+        d = d / a,
+        inflection = -b / 3,
+        p = c - b^2 / 3,
+        q = 2 * b^3 / 27 - b * c / 3 + d,
+        det = q^2 / 4 + p^3 / 27,
+        roots = !p && !q ? 1 : nearly_zero(det) ? 2 :  det < 0 ? 3 : 1,
+        r = sqrt(det),
+        x = cuberoot(-q / 2 - r) + cuberoot(-q / 2 + r)
+    ) roots == 1 ? [x] :
+      roots == 2 ? [3 * q /p + inflection, -3 * q / p / 2 + inflection] :
+      [for(i = [0 : roots - 1]) 2 * sqrt(-p / 3) * cos(acos(3 * q * sqrt(-3 / p) / p / 2) - i * 120) + inflection];

utils/rounded_polygon.scad

@@ -75,28 +75,28 @@ function rounded_polygon_length(points, tangents) = //! Calculate the length giv
 module rounded_polygon(points, _tangents = undef) { //! Draw the rounded polygon from the point list, can pass the tangent list to save it being calculated
     len = len(points);
     indices = [0 : len - 1];
-    tangents = [ for (t = _tangents ? _tangents : rounded_polygon_tangents(points)) each [t.x, t.y] ];
+    tangents = _tangents ? _tangents : rounded_polygon_tangents(points);
 
-    difference(convexity = points) {
+    difference() {
         union() {
-            for(i = indices)
+            for(i = indices, last = (i - 1 + len) % len)
                 if(points[i][2] > 0)
                     hull() {
-                        translate([points[i].x, points[i].y])
+                        translate(vec2(points[i]))
                             circle(points[i][2]);
 
-                        polygon([tangents[(2 * i - 1 + 2 * len) % (2 * len)], tangents[2 * i], [points[i].x, points[i].y]]);
+                        polygon([vec2(tangents[last][1]), vec2(tangents[i][0]), vec2(points[i])]);
                     }
 
-            polygon(tangents, convexity = points);
+            polygon([for(t = tangents) each(vec2(t))], convexity = points);
         }
-        for(i = indices)
+        for(i = indices, last = (i - 1 + len) % len)
             if(points[i][2] < 0)
                 hull() {
-                    translate([points[i].x, points[i].y])
+                    translate(vec2(points[i]))
                         circle(-points[i][2]);
 
-                    polygon([tangents[(2 * i - 1 + 2 * len) % (2 * len)], tangents[2 * i], [points[i].x, points[i].y]]);
+                    polygon([vec2(tangents[last][1]), vec2(tangents[i][0]), vec2(points[i])]);
                 }
      }
 }

utils/thread.scad

@@ -50,6 +50,7 @@ function thread_profile(h, crest, angle, overlap = 0.1) = //! Create thread prof
         [[-base / 2, -overlap, 0], [-crest / 2, h, 0], [crest / 2, h, 0], [base / 2, -overlap, 0]];
 
 module thread(dia, pitch, length, profile, center = true, top = -1, bot = -1, starts = 1, solid = true, female = false, colour = undef) { //! Create male or female thread, ends can be tapered, chamfered or square
+    assert(is_undef(colour) || is_list(colour), "Thread colour must be in [r, g, b] form");
     //
     // Apply colour if defined
     //
@@ -155,7 +156,7 @@ module thread(dia, pitch, length, profile, center = true, top = -1, bot = -1, st
                                         translate([0, offset])
                                             square([r, len]);
 
-                                        translate([0, bot_chamfer_h])
+                                        translate([0, offset + bot_chamfer_h])
                                             square([r + h + overlap, len - top_chamfer_h - bot_chamfer_h]);
                                     }
                                     if(!solid)
@@ -190,7 +191,8 @@ module female_metric_thread(d, pitch, length, center = true, top = -1, bot = -1,
 }
 
 function metric_coarse_pitch(d) //! Convert metric diameter to pitch
-    = d == 1.6 ? 0.35  // M1.6
+    = d == 1.4 ? 0.3   // M1.4
+    : d == 1.6 ? 0.35  // M1.6
                : [0.4, // M2
                   0.45,// M2.5
                   0.5, // M3

vitamins/bldc_motor.scad

@@ -0,0 +1,286 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//!  Brushless DC electric motor
+//
+include <NopSCADlib/core.scad>
+
+use <NopSCADlib/vitamins/rod.scad>
+use <NopSCADlib/utils/thread.scad>
+use <NopSCADlib/utils/tube.scad>
+
+
+function BLDC_diameter(type)                    = type[1]; //! Diameter of motor
+function BLDC_height(type)                      = type[2]; //! Height of motor including boss, if any, but excluding prop shaft
+function BLDC_shaft_diameter(type)              = type[3]; //! shaft diameter
+function BLDC_shaft_length(type)                = type[4]; //! Total shaft length
+function BLDC_shaft_offset(type)                = type[5]; //! shaft offset from base
+function BLDC_body_colour(type)                 = type[6]; //! Body colour
+function BLDC_base_diameter(type)               = type[7]; //! Base diameter
+function BLDC_base_height_1(type)               = type[8]; //! Base height 1
+function BLDC_base_height_2(type)               = type[9]; //! Base height 2
+function BLDC_base_hole_diameter(type)          = type[10]; //! Base hole diameter
+function BLDC_base_holes(type)                  = type[11]; //! Base holes
+function BLDC_base_open(type)                   = type[12]; //! Base open
+function BLDC_wire_diameter(type)               = type[13]; //! Wire diameter
+function BLDC_side_colour(type)                 = type[14]; //! Side colour
+function BLDC_bell_diameter(type)               = type[15]; //! Bell diameter
+function BLDC_bell_height_1(type)               = type[16]; //! Bell height 1
+function BLDC_bell_height_2(type)               = type[17]; //! Bell height 2
+function BLDC_bell_hole_diameter(type)          = type[18]; //! Bell hole diameter
+function BLDC_bell_holes(type)                  = type[19]; //! Bell holes
+function BLDC_bell_spokes(type)                 = type[20]; //! Bell spoke count
+function BLDC_boss_diameter(type)               = type[21]; //! Boss diameter
+function BLDC_boss_height(type)                 = type[22]; //! Boss height
+function BLDC_prop_shaft_length(type)           = type[23]; //! Prop shaft length, including threaded section
+function BLDC_prop_shaft_diameter(type)         = type[24]; //! Diameter of unthreaded portion of prop shaft
+function BLDC_prop_shaft_thread_length(type)    = type[25]; //! Length of threaded section of prop shaft
+function BLDC_prop_shaft_thread_diameter(type)  = type[26]; //! Diameter of threaded section of prop shaft
+
+bldc_cap_colour  = grey(50);
+bldc_shaft_colour = grey(90);
+bldc_bearing_colour = grey(80);
+
+module BLDC(type) { //! Draw specified BLDC motor
+    vitamin(str("BLDC(", type[0], "): Brushless DC motor ", type[0]));
+
+    body_colour = BLDC_body_colour(type);
+    side_colour = BLDC_side_colour(type);
+    body_diameter = BLDC_diameter(type);
+    wall_thickness = 1;
+
+    height = BLDC_height(type) - BLDC_boss_height(type);
+
+    module feet(base_diameter) {
+        holes = BLDC_base_holes(type);
+        hole_count = is_list(holes) ? len(holes) : 4;
+        for(i = [0 : 1 : hole_count - 1]) {
+            spacing = is_list(holes) ? holes[i] : holes;
+            radius = base_diameter / 2 - spacing / 2;
+            rotate(i * 360 / hole_count + (hole_count == 4 ? 45 : 0))
+                difference() {
+                    hull() {
+                        circle(r = radius);
+                        translate([-spacing / 2, 0])
+                            circle(r = radius);
+                    }
+                    translate([-spacing / 2, 0])
+                        circle(d = BLDC_base_hole_diameter(type));
+                }
+        }
+    }
+
+    module cutout(d1, d2, r, h) {
+        translate_z(-eps)
+            linear_extrude(h + 2 * eps)
+                hull() {
+                    translate([d1 / 2, 0])
+                        circle(r = r);
+                    translate([d2 / 2, -r])
+                        square([eps, 2 * r]);
+                }
+    }
+
+    module cutout2(d1, r1, d2, r2, h) {
+        translate_z(-eps)
+            linear_extrude(h + 2 * eps)
+                hull() {
+                    translate([d1 / 2, 0])
+                        circle(r = r1);
+                    translate([d2 / 2, 0])
+                        circle(r = r2);
+                }
+    }
+
+    module base() {
+        base_diameter = BLDC_base_diameter(type);
+        h1 = BLDC_base_height_1(type);
+        h2 = BLDC_base_height_2(type);
+        color(body_colour)
+            if (BLDC_base_open(type)) {
+                linear_extrude(h1)
+                    difference() {
+                        union() {
+                            feet(base_diameter);
+                            circle(d = 3 * BLDC_shaft_diameter(type));
+                        }
+                        circle(d = 2 * BLDC_shaft_diameter(type));
+                    }
+                translate_z(h1)
+                    cylinder(d = 3 * BLDC_shaft_diameter(type), h = h2);
+            } else {
+                difference() {
+                    union() {
+                        render(convexity = 8)
+                            linear_extrude(h1)
+                                difference() {
+                                    circle(d = base_diameter);
+                                    circle(d = 2 * BLDC_shaft_diameter(type));
+                                    BLDC_base_screw_positions(type)
+                                        circle(d = BLDC_base_hole_diameter(type));
+                                }
+                        rotate_extrude()
+                            polygon([ [base_diameter / 2, 0], [body_diameter / 2, h1], [body_diameter / 2, h1+h2], [body_diameter / 2 - wall_thickness, h1 + h2], [body_diameter / 2 - wall_thickness, h1], [base_diameter / 2, h1] ]);
+                    }
+                r = body_diameter > 40 ? 2 : body_diameter * PI / (8 * 3);
+                if (body_diameter > 40) {
+                    r = 2;
+                    // cutout for wires
+                    translate_z(h2 /2)
+                        cutout(base_diameter, body_diameter, 6, h1);
+                    for (a = [90, 180, 270])
+                        rotate(a) {
+                            cutout(base_diameter - 2 * r, body_diameter, r, h1 + h2 / 2);
+                            for (b = [-90 / 4, 90 / 4])
+                                rotate(b)
+                                    cutout(base_diameter - 5 * r, body_diameter, r, h1 + h2 / 2);
+                        }
+                } else {
+                    r = body_diameter * PI / (8 * 3);
+                    for (a = [0, 90, 180, 270])
+                        rotate(a)
+                            cutout(base_diameter, body_diameter, r, h1);
+                }
+            }
+        }
+        color(bldc_bearing_colour)
+            translate_z(0.25)
+                tube(or = BLDC_shaft_diameter(type), ir = BLDC_shaft_diameter(type) / 2, h = h1, center = false);
+
+        if (show_threads)
+            BLDC_base_screw_positions(type)
+                female_metric_thread(BLDC_base_hole_diameter(type), metric_coarse_pitch(BLDC_base_hole_diameter(type)), h1, center = false, colour = body_colour);
+
+        wire_diameter = BLDC_wire_diameter(type);
+        for (i = [0 : 2])
+            color(wire_diameter >= 3 ? ["yellow", grey(20), "red"][i] : grey(20))
+                translate([body_diameter / 5, (i - 1) * wire_diameter, wire_diameter / 2 + 0.25 + (body_diameter > 40 ? h2/2 : 0)])
+                    rotate([0, 90, 0])
+                        cylinder(r = wire_diameter / 2, h = body_diameter / 2, center = false);
+
+    } // end module base
+
+    module bell() {
+        bell_diameter = BLDC_bell_diameter(type);
+        h1 = BLDC_bell_height_1(type);
+        h2 = BLDC_bell_height_2(type);
+        gap = BLDC_base_open(type) ? 0 : height > 20 ? 0.5 : 0.25;
+        side_length = height - h2 - h1 - gap - BLDC_base_height_1(type) - BLDC_base_height_2(type);
+
+        color(body_colour) {
+            translate_z(height - h2) {
+                difference() {
+                    union() {
+                        top_thickness = min(h2, 2);
+                        render(convexity = 8)
+                            translate_z(h2 - top_thickness)
+                                linear_extrude(top_thickness)
+                                    difference() {
+                                        circle(d = bell_diameter);
+                                        if (BLDC_shaft_length(type) > height)
+                                            circle(d = BLDC_shaft_diameter(type));
+                                        BLDC_bell_screw_positions(type)
+                                            circle(d = BLDC_bell_hole_diameter(type));
+                                    }
+                        rotate_extrude()
+                            polygon([ [bell_diameter/2, h2], [body_diameter/2, 0], [body_diameter/2, -h1], [body_diameter/2 - wall_thickness, -h1], [body_diameter/2 - wall_thickness, 0], [bell_diameter/2, h2 - top_thickness] ]);
+                    }
+                    spoke_count = BLDC_bell_spokes(type);
+                    if (spoke_count % 4 == 0) {
+                        r = body_diameter > 40 ? body_diameter / 15 : 2.5;
+                        for (a = [0, 90, 180, 270])
+                            rotate(a) {
+                                cutout(bell_diameter + 2 * r, body_diameter, r, h2);
+                                rotate(45) {
+                                    cutout(bell_diameter, body_diameter, r, h2);
+                                }
+                            }
+                    } else {
+                        r1 = bell_diameter * PI / (spoke_count * 3);
+                        r2 = body_diameter * PI / (spoke_count * 3);
+                        for (i = [0 : 1 : spoke_count - 1])
+                            rotate(i * 360 / spoke_count)
+                                cutout2(bell_diameter, r1, body_diameter, r2, h2);
+                    }
+                } // end difference
+            } // end translate
+
+            if (BLDC_boss_height(type))
+                translate_z(height)
+                    tube(or = BLDC_boss_diameter(type)/2, ir = BLDC_shaft_diameter(type)/2, h = BLDC_boss_height(type), center = false);
+
+            if (BLDC_prop_shaft_diameter(type))
+                translate_z(height + BLDC_boss_height(type)) {
+                    thread_diameter = BLDC_prop_shaft_thread_diameter(type);
+                    unthreaded_length = BLDC_prop_shaft_length(type) - BLDC_prop_shaft_thread_length(type);
+                    cylinder(d=BLDC_prop_shaft_diameter(type), h = unthreaded_length);
+                    translate_z(unthreaded_length)
+                        if (show_threads)
+                            male_metric_thread(thread_diameter, metric_coarse_pitch(thread_diameter), BLDC_prop_shaft_thread_length(type), center = false);
+                        else
+                            cylinder(d = thread_diameter, h = BLDC_prop_shaft_thread_length(type));
+                }
+        } // end colour
+
+        color(side_colour)
+            translate_z(height - h2 - h1  -side_length)
+                tube(body_diameter/2, body_diameter/2 - wall_thickness, side_length, center = false);
+
+        if (show_threads)
+            translate_z(height)
+                BLDC_bell_screw_positions(type)
+                    vflip()
+                        female_metric_thread(BLDC_bell_hole_diameter(type), metric_coarse_pitch(BLDC_bell_hole_diameter(type)), h2, center = false, colour = body_colour);
+    } // end module bell
+
+    base();
+    bell();
+
+    color(bldc_shaft_colour)
+        translate_z(-BLDC_shaft_offset(type) - eps)
+            not_on_bom()
+                rod(d = BLDC_shaft_diameter(type), l = BLDC_shaft_length(type), center = false);
+
+}
+
+module BLDC_screw_positions(holes, n = 4) { //! Screw positions utility function
+    hole_count = is_list(holes) ? len(holes) : 4;
+    for($i = [0 : min(n, hole_count) - 1]) {
+        spacing = is_list(holes) ? holes[$i] : holes;
+        rotate($i * 360 / hole_count)
+            translate([spacing / 2, 0])
+                rotate(-$i * 90)
+                    children();
+    }
+}
+
+module BLDC_base_screw_positions(type, n = 4) { //! Positions children at the base screw holes
+    if (BLDC_base_holes(type))
+        rotate(is_list(BLDC_base_holes(type)) && len(BLDC_base_holes(type)) == 3 ? 180 : 45)
+            BLDC_screw_positions(BLDC_base_holes(type), n)
+                children();
+}
+
+module BLDC_bell_screw_positions(type, n = 4) { //! Positions children at the bell screw holes
+    if (BLDC_bell_holes(type))
+        rotate(is_list(BLDC_bell_holes(type)) && len(BLDC_bell_holes(type)) == 3 ? 30 : 0)
+            BLDC_screw_positions(BLDC_bell_holes(type), n)
+                children();
+}

vitamins/bldc_motors.scad

@@ -0,0 +1,37 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+// Brushless DC electric motors
+//
+//                                     shaft  shaft shaft      body   base             holes                 base            side  bell             holes          boss  prop shaft   thread
+//                      diameter height diam length offset   colour   diam   h1    h2  diam position         open  wire    colour  diam   h1    h1  d  pos   spokes  d  h  length diam  length  diam
+BLDC0603  = ["BLDC0603",    9.0,  8,      1,  15.5,     1, crimson,    10,   1,  1.5,  1.4, [6,6,6],        true,  0.8, grey(20),    9,   1,    1,  0,  0,       5,  0, 0,     0,   0,      0,     0];
+BLDC0802  = ["BLDC0802",   11.5,  9.5,  1.5,    12,   0.5, grey(20),    9,   1,    2,  1.6, [6,6,6],        true,  1.0, grey(20),   11,   2, 0.75,  0,  0,       3,  0, 0,     0,   0,      0,     0];
+BLDC1105  = ["BLDC1105",   14.0, 11.75, 1.5,    11,     0, grey(90), 12.5, 1.6,  1.4,  2,    9,             true,  1.0, grey(90),   12,   1,    1,  2, [5,5],    4,  0, 0,     0,   0,      0,     0];
+BLDC1306  = ["BLDC1306",  17.75, 14.5,    2,    14,     0, crimson,    16, 1.5,    1,  2,   12,            false,  1.0, grey(20),   12,   1,    1,  0,  0,       6,  8, 1,  11.5,   5,    6.5,     5];
+BLDC1804  = ["BLDC1804",   23.0, 12,      2,    11,     0, grey(20),   19, 2.5,  1.5,  2,   12,            false,  1.5, grey(20),   18,   1,  2.5,  0,  0,       6,  9, 1,    12,   5,      6,     5];
+BLDC2205  = ["BLDC2205",   28.0, 17.25,   3,    16,     0, crimson,    26,   2,    3,  3,   [19,16,19,16], false,  1.6, grey(20), 22.5,   1, 3.75,  0,  0,       6,  0, 0,    14,   5,      9,     5];
+BLDC2212  = ["BLDC2212",   28.0, 27,      3,    26,     0, grey(20),   23,   4,    2,  3,   [19,16,19,16], false,  2.0, grey(20),   18,   2,    4,  0,  0,       6,  0, 0,    14,   8,      7,     6];
+BLDC3548  = ["BLDC3548",   35.0, 45,      5,  65.5,     1, gold,       32,   7,    1,  3,   [25,19,25,19], false,  3.0, grey(20),   32,   2,    4,2.5, [16,16,16],6,12, 3.4,   0,   0,      0,     0];
+BLDC4250  = ["BLDC4250",   42.5, 48,      5,    70,    20, crimson,    38,   4,    6,  3,   25,            false,  3.5, grey(20),   28,   3,    6,  3, 17,       8, 12, 2,     0,   0,      0,     0];
+
+bldc_motors = [BLDC0603, BLDC0802, BLDC1105, BLDC1306, BLDC1804, BLDC2205, BLDC2212, BLDC3548, BLDC4250];
+
+use <bldc_motor.scad>

vitamins/blower.scad

@@ -28,6 +28,7 @@ use <screw.scad>
 function blower_length(type)      = type[2]; //! Length of enclosing rectangle
 function blower_width(type)       = type[3]; //! Width of enclosing rectangle
 function blower_depth(type)       = type[4]; //! Height
+function blower_size(type)        = [blower_length(type), blower_width(type), blower_depth(type)]; //! Size
 function blower_bore(type)        = type[5]; //! The air intake hole diameter
 function blower_screw(type)       = type[6]; //! The type of screws needed
 function blower_hub(type)         = type[7]; //! Rotor hub diameter

vitamins/box_section.scad

@@ -0,0 +1,58 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Box sections.
+//
+include <../utils/core/core.scad>
+include <../utils/tube.scad>
+
+include <../vitamins/sheets.scad>
+
+function box_section_material(type)  = type[1]; //! Material description
+function box_section_size(type)      = type[2]; //! Size
+function box_section_thickness(type) = type[3]; //! Wall thickness
+function box_section_fillet(type)    = type[4]; //! Fillet
+function box_section_colour(type)    = type[5]; //! Colour
+function box_section_colour2(type)   = type[6]; //! Colour2, for woven box section
+function box_section_is_woven(type)  = !is_undef(type[6]); //! Box section is woven, eg carbon fiber
+
+module box_section(type, length, center = true) {
+    vitamin(str("box_section(", type[0], arg(length, 15), "): ", box_section_material(type), ", length ", length, "mm"));
+
+    size = box_section_size(type);
+    thickness = box_section_thickness(type);
+
+    if (box_section_is_woven(type))
+        translate_z(center ? 0 : length / 2) {
+            rotate([0, -90, 90])
+                for (z = [-size.y / 2, size.y / 2 - thickness])
+                    translate_z(z)
+                        woven_sheet(CF1, thickness, box_section_colour(type), box_section_colour2(type), length, size.x)
+                            square([length, size.x], center=true);
+            rotate([0, -90, 0])
+                for (z = [-size.x / 2, size.x / 2 - thickness])
+                    translate_z(z)
+                        woven_sheet(CF1, thickness, box_section_colour(type), box_section_colour2(type), length, size.y)
+                            square([length, size.y], center=true);
+        }
+    else
+        color(box_section_colour(type))
+            rectangular_tube([size.x, size.y, length], center, thickness, box_section_fillet(type));
+}

vitamins/box_sections.scad

@@ -0,0 +1,30 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+// Box sections
+//
+AL12x8x1 =  ["AL12x8x1",  "Aluminium rectangular box section 12mm x 8mm x 1mm",     [12, 8],  1, 0.5, silver, undef];
+AL20x20x2 = ["AL20x20x2", "Aluminium rectangular box section 20mm x 20mm x 2mm",    [20, 20], 2, 0.5, silver, undef];
+CF10x10x1 = ["CF10x10x1", "Carbon fiber rectangular box section 10mm x 10mm x 1mm", [10, 10], 1, 0.5, grey(35), grey(20)];
+
+
+box_sections = [AL12x8x1, AL20x20x2, CF10x10x1];
+
+use <box_section.scad>

vitamins/geared_stepper.scad

@@ -26,89 +26,138 @@ use <../utils/round.scad>
 
 function gs_diameter(type)     = type[2]; //! Can diameter
 function gs_height(type)       = type[3]; //! Can height
-function gs_pitch(type)        = type[4]; //! Screw pitch
-function gs_lug_w(type)        = type[5]; //! Screw lug width
-function gs_lug_t(type)        = type[6]; //! Screw lug thickness
-function gs_hole_d(type)       = type[7]; //! Screw hole diameter
-function gs_offset(type)       = type[8]; //! Offset of the shaft from the centre of the can
-function gs_boss_d(type)       = type[9]; //! Boss around the shaft diameter
-function gs_boss_h(type)       = type[10]; //! Boss around the shaft height
-function gs_shaft_d(type)      = type[11]; //! Shaft diameter
-function gs_shaft_flat(type)   = type[12]; //! Shaft width across the flats
-function gs_shaft_length(type) = type[13]; //! Shaft length
-function gs_flat_length(type)  = type[14]; //! Shaft flat length
-function gs_bulge_w(type)      = type[15]; //! Plastic bulge width
-function gs_bulge_d(type)      = type[16]; //! Plastic bulge depth from centre
-function gs_bulge_h(type)      = type[17]; //! Plastic bulge height
-function gs_bulge2_w(type)     = type[18]; //! Plastic rear bulge width
-function gs_bulge2_d(type)     = type[19]; //! Plastic rear bulge depth from centre
-function gs_bulge2_h(type)     = type[20]; //! Plastic rear bulge height
+function gs_radius(type)       = type[4]; //! Top - or bottom + corner radius
+function gs_motor(type)        = type[5]; //! Motor diameter and height if separate from gearbox
+function gs_pitch(type)        = type[6]; //! Screw pitch
+function gs_lug_w(type)        = type[7]; //! Screw lug width
+function gs_lug_t(type)        = type[8]; //! Screw lug thickness
+function gs_hole_d(type)       = type[9]; //! Screw hole diameter
+function gs_offset(type)       = type[10]; //! Offset of the shaft from the centre of the can
+function gs_boss_d(type)       = type[11]; //! Boss around the shaft diameter
+function gs_boss_h(type)       = type[12]; //! Boss around the shaft height
+function gs_shaft_d(type)      = type[13]; //! Shaft diameter
+function gs_shaft_flat(type)   = type[14]; //! Shaft width across the flats
+function gs_shaft_length(type) = type[15]; //! Shaft length
+function gs_flat_length(type)  = type[16]; //! Shaft flat length
+function gs_bulge(type)        = type[17]; //! Plastic bulge width, depth, height, z offset
+function gs_bulge2(type)       = type[18]; //! Plastic rear bulge width, depth, height
+function gs_wire_d(type)       = type[19]; //! Wire diameter
+function gs_wires(type)        = type[20]; //! Wire colours and grouping
 
 module geared_stepper_screw_positions(type) //! Place children at the screw positions
     for(side = [-1, 1])
         translate([side * gs_pitch(type) / 2, -gs_offset(type)])
             children();
 
+motor_colour = "#9BA2AC";
+gearbox_colour = "#FFF7EE";
+
 module geared_stepper(type) { //! Draw the specified geared stepper
     vitamin(str("geared_stepper(", type[0], "): Geared stepper - ", type[1]));
 
     radius = gs_diameter(type) / 2;
-    height = gs_height(type);
+    motor = gs_motor(type);
+    height = gs_height(type) - motor.y;
     offset = gs_offset(type);
-    color("silver") {
-        translate([0, -offset])
-            rounded_cylinder(r = radius, h = height, r2 = 1);
+    lug_t = gs_lug_t(type);
+    bulge = gs_bulge(type);
+    bulge_z = bulge[3];
+    bulge2 = gs_bulge2(type);
+    wires = gs_wires(type);
+
+    // Gearbox
+    color(motor.y ? gearbox_colour : motor_colour) {
+        difference() {
+            rad = gs_radius(type);
+            translate([0, -offset])
+                if(rad >= 0)
+                    rounded_cylinder(r = radius, h = height, r2 = rad);
+                else
+                    translate_z(height)
+                        vflip()
+                            rounded_cylinder(r = radius, h = height, r2 = -rad);
+
+            if(!lug_t)
+                geared_stepper_screw_positions(type)
+                    cylinder(d = gs_hole_d(type), h = 10, center = true);
+        }
 
         cylinder(d = gs_boss_d(type), h = 2 * gs_boss_h(type), center = true);
 
-        linear_extrude(gs_lug_t(type))
-            difference() {
-                hull()
+        if(lug_t)
+            linear_extrude(lug_t)
+                difference() {
+                    hull()
+                        geared_stepper_screw_positions(type)
+                            circle(d = gs_lug_w(type));
+
                     geared_stepper_screw_positions(type)
-                        circle(d = gs_lug_w(type));
+                        circle(d = gs_hole_d(type));
+                }
 
-                geared_stepper_screw_positions(type)
-                    circle(d = gs_hole_d(type));
-            }
-
-        translate([0, -offset - radius, eps])
-            cube([gs_bulge_w(type) - 2, 2 * (gs_bulge_d(type) - radius) - 2, 2 * eps], center = true);
+        if(!bulge_z)
+            translate([0, -offset - radius, eps])
+                cube([bulge.x - 2, 2 * (bulge.y - radius) - 2, 2 * eps], center = true);
     }
+
+    // Motor
+    if(motor.y)
+        color("#9BA2AC")
+            translate([0, -offset, height])
+                rotate_extrude()
+                    union() {
+                        r = motor.x / 2;
+                        rad = motor[2];
+                        square([r - rad, rad]);
+
+                        translate([0, motor.y - rad])
+                            square([r - rad, rad]);
+
+                        hull()
+                            for(y = [2 * rad, motor.y - 2 * rad])
+                                translate([r - rad, y])
+                                    circle(rad);
+                    }
+
+    // Shaft
+    f = gs_shaft_flat(type);
+    two_flats = f < 0;
     vflip()
-        color(brass) {
+        color(two_flats ? brass : gearbox_colour) {
             d = gs_shaft_d(type);
             h = gs_shaft_length(type);
             linear_extrude(h)
                 intersection() {
                     circle(d = d);
 
-                    square([d + 1, gs_shaft_flat(type)], center = true);
+                    translate([0, two_flats ? 0 : (f - d) / 2])
+                        square([d + 1, abs(f)], center = true);
                 }
 
             cylinder(d = d, h = h - gs_flat_length(type));
         }
 
-    color("skyblue") {
-        h1 = gs_bulge_h(type);
-        translate([0, - offset - radius, eps])
-            rounded_rectangle([gs_bulge_w(type), 2 * (gs_bulge_d(type) - radius), h1], 0.5, center = false);
+    // Wire block
+    color(bulge_z ? "white" : "skyblue") {
+        translate([0, - offset - radius, eps + bulge[3]])
+            rounded_rectangle([bulge.x, 2 * (bulge.y - radius), bulge.z], 0.5, center = false);
 
-        h2 = gs_bulge2_h(type);
-        translate([0, - offset, h1 + 1 - h2])
-            linear_extrude(h2)
-                round(0.5)
-                    intersection() {
-                        circle(gs_bulge2_d(type));
+        if(bulge2.z)
+            translate([0, - offset, bulge.z + 1 - bulge2.z])
+                linear_extrude(bulge2.z)
+                    round(0.5)
+                        intersection() {
+                            circle(bulge2.y);
 
-                        translate([0, -50])
-                            square([gs_bulge2_w(type), 100], center = true);
-                    }
+                            translate([0, -50])
+                                square([bulge2.x, 100], center = true);
+                        }
     }
 
-    translate_z(2.5)
-        for(i = [0 : 4])
-            translate([i - 2.5, 0])
-                rotate([90, 0, 0])
-                    color(["yellow", "orange", "red", "pink", "blue"][i])
-                        cylinder(d = 1, h = radius + offset + 10);
+    wire_d = gs_wire_d(type);
+    for(j = [0 : len(wires) - 1], i = [0 : len(wires[j]) - 1])
+        translate([(i - len(wires[j]) / 2 + 0.5) * wire_d, 0, bulge_z + (j ? bulge.z - 2.5 : 2.5)])
+            rotate([90, 0, 0])
+                color(wires[j][i])
+                    cylinder(d = wire_d, h = radius + offset + 10);
 }

vitamins/geared_steppers.scad

@@ -20,8 +20,16 @@
 //
 //! Geared tin can steppers
 //
-28BYJ_48 = ["28BYJ_48", "28BYJ-48 5V", 28, 19, 35, 7, 0.85, 4.2, 8, 9, 1.5, 5, 3, 10, 6, 14.7, 17, 16.5, 17.7, 15.5, 13.8 ];
+//                                          d   h   r    m           p  l    l     h  o   b    b  s    f   s   f      b                       b               w
+//                                          i   e   a    o           i  u    u     o  f   o    o  h    l   h   l      u                       u               i
+//                                          a   i   d    t           t  g    g     l  f   s    s  a    a   a   a      l                       l               r
+//                                              g   i    o           c             e  s   s    s  f    t   f   t      g                       g               e
+//                                              h   u    r           h  w    t        e           t        t          e                       e
+//                                              t   s                              d  t   d    h       w       l                              2               d
+//                                                       d   h  r                                 d        l          w   d       h   z       w     d     h
+28BYJ_48  = ["28BYJ_48",  "28BYJ-48 5V",   28, 19,  1, [ 0,  0, 0], 35, 7, 0.85, 4.2, 8,  9, 1.5, 5,-3.0, 10,  6, [14.7, 17,   16.5,  0], [17.7, 15.5, 13.8], 1,  [["yellow", "orange", "red", "pink", "blue"]] ];
+35BYGHJ75 = ["35BYGHJ75", "35BYGHJ75 0.4A",37, 37, -2, [35, 22, 1], 27, 0,    0, 3.0, 7, 12, 3.0, 5, 4.5, 17, 10, [ 7.7, 20.7, 9.25, 21], [   0,    0,    0], 1.3,[["brown", "red"], ["yellow", "green"]] ];
 
-geared_steppers = [28BYJ_48];
+geared_steppers = [28BYJ_48, 35BYGHJ75];
 
 use <geared_stepper.scad>

vitamins/iecs.scad

@@ -55,7 +55,7 @@ outlet_spades = [[spade4p8ll, 8, -7,  -2, 90],
 //                                                                                                                            w     h  r    t
 IEC_fused_inlet = ["IEC_fused_inlet", "IEC fused inlet JR-101-1F",   M3_cs_cap_screw, 36, 27, 16, 31, 3, 28,   31,   2, 2.0, 30,   33, 4, 3.0, 44, 15, fused_spades,  false ];
 IEC_fused_inlet2= ["IEC_fused_inlet2","IEC fused inlet old",         M3_cs_cap_screw, 36, 27, 14, 31, 3, 28,   31,   2, 2.5, 30,   33, 4, 2.5, 44, 18, fused_spades2, false ];
-IEC_320_C14_switched_fused_inlet = ["IEC_switched_fused_inlet", "IEC320 C14 switched fused inlet module",
+IEC_320_C14_switched_fused_inlet = ["IEC_320_C14_switched_fused_inlet", "IEC320 C14 switched fused inlet module",
                                                                      M3_cs_cap_screw, 40,  27, 16,46.8,3,28,   48, 2.4, 1.0, 33,   57, 4, 3.0, 48,16.5, iec320c14FusedSwitchedSpades,  false ];
 IEC_inlet       = ["IEC_inlet",       "IEC inlet",                   M3_cs_cap_screw, 40, 28, 18, 20, 3, 28,   20.5, 4, 2.5, 37,   23, 1, 2.5, 48, 14, inlet_spades,  false ];
 IEC_inlet_atx   = ["IEC_inlet_atx",   "IEC inlet for ATX",           M3_cs_cap_screw, 40, 27, 18, 19, 3, 30.5, 22,   2, 2.0, 30.5, 22, 2, 4.0, 50, 15, atx_spades,    false ];

vitamins/leadnut.scad

@@ -32,7 +32,7 @@ function leadnut_flange_t(type)      = type[6];     //! Flange thickness
 function leadnut_flange_offset(type) = type[7];     //! Offset of the flange from the top
 function leadnut_holes(type)         = type[8];     //! The number of screw holes
 function leadnut_hole_dia(type)      = type[9];     //! The diameter of the screw holes
-function leadnut_hole_pitch(type)    = type[10];    //! The radia pitch of the screw holes
+function leadnut_hole_pitch(type)    = type[10];    //! The radial pitch of the screw holes
 function leadnut_screw(type)         = type[11];    //! The type of the fixing screws
 function leadnut_pitch(type)         = type[12];    //! Screw pitch
 function leadnut_lead(type)          = type[13];    //! Screw lead

vitamins/opengrab.scad

@@ -62,6 +62,7 @@ function opengrab_depth() = depth;                               //! Module heig
 function opengrab_target_thickness() = target;                   //! Target sheet thickness
 function opengrab_pcb() = pcb;                                   //! The PCB
 function opengrab_pcb_z() = depth - pillar - pcb_thickness(pcb); //! PCB offset from the front
+function opengrab_screw_depth() = 4;                             //! Max screw depth in pillars
 
 module opengrab() { //! Draw OpenGrab module
     vitamin("opengrab(): OpenGrab V3 electro permanent magnet");

vitamins/pcb.scad

@@ -55,6 +55,9 @@ function pcb_polygon(type)      = type[14]; //! Optional outline polygon for odd
 function pcb_screw(type, cap = hs_cap) = Len(type[15]) ? type[15] : find_screw(cap, screw_smaller_than(pcb_hole_d(type))); //! Mounting screw type
 function pcb_size(type) = [pcb_length(type), pcb_width(type), pcb_thickness(type)]; //! Length, width and thickness in a vector
 
+function pcb_component(type, name, index = 0) = //! Return the component specified by name and index
+    [for(component = pcb_components(type)) if(component[3] == name) component][index];
+
 
 function pcb_grid_pos(type, x, y, z = 0) = //! Returns a pcb grid position
     [-pcb_length(type) / 2 + pcb_grid(type).x + 2.54 * x,

vitamins/psu.scad

@@ -44,6 +44,7 @@ function psu_name(type)              = type[1];     //! The part name
 function psu_length(type)            = type[2];     //! Length
 function psu_width(type)             = type[3];     //! Width
 function psu_height(type)            = type[4];     //! Height
+function psu_size(type)              = [psu_length(type), psu_width(type), psu_height(type)]; //! Size
 function psu_screw(type)             = type[5];     //! Screw type
 function psu_screw_hole_radius(type) = type[6];     //! Clearance hole for screw, bigger than normal on ATX
 function atx_psu(type)               = type[7];     //! True if an ATX style PSU

vitamins/pulley.scad

@@ -53,7 +53,7 @@ function pulley_extent(type) = max(pulley_flange_dia(type), pulley_hub_dia(type)
 T_angle = 40;
 GT_r = 0.555;
 
-module pulley(type, colour = silver) { //! Draw a pulley
+module pulley(type, colour = silver) { //! Draw a pulley, any children are placed above.
     teeth = pulley_teeth(type);
     od = pulley_od(type);
 
@@ -138,6 +138,10 @@ module pulley(type, colour = silver) { //! Draw a pulley
         else
             core();
     }
+
+    if($children)
+        translate_z(pulley_height(type))
+            children();
 }
 
 module pulley_assembly(type, colour = silver) { //! Draw a pulley with its grub screws in place

vitamins/rail.scad

@@ -37,18 +37,19 @@ function rail_groove_width(type)=type[11];  //! Groove width
 
 function rail_screw_height(type, screw) = rail_height(type) - rail_bore_depth(type) + screw_head_depth(screw, rail_hole(type)); //! Position screw taking into account countersink into counterbored hole
 
-function carriage_length(type)       = type[0]; //! Overall length
-function carriage_block_length(type) = type[1]; //! Length of the metal part
-function carriage_width(type)        = type[2]; //! Width of carriage
-function carriage_height(type)       = type[3]; //! Height of carriage
-function carriage_size(type)         = [ type[0], type[2], type[3] ]; //! Size of carriage
-function carriage_clearance(type)    = type[4]; //! Gap under the carriage
-function carriage_pitch_x(type)      = type[5]; //! Screw hole x pitch
-function carriage_pitch_y(type)      = type[6]; //! Screw hole y pitch
-function carriage_screw(type)        = type[7]; //! Carriage screw type
-function carriage_rail(type)         = type[8]; //! Rail type
+function carriage_length(type)       = type[1]; //! Overall length
+function carriage_block_length(type) = type[2]; //! Length of the metal part
+function carriage_width(type)        = type[3]; //! Width of carriage
+function carriage_height(type)       = type[4]; //! Height of carriage
+function carriage_clearance(type)    = type[5]; //! Gap under the carriage
+function carriage_pitch_x(type)      = type[6]; //! Screw hole x pitch
+function carriage_pitch_y(type)      = type[7]; //! Screw hole y pitch
+function carriage_screw(type)        = type[8]; //! Carriage screw type
+function carriage_rail(type)         = type[9]; //! Rail type
+
 function carriage_screw_depth(type)  = 2 * screw_radius(carriage_screw(type)); //! Carriage thread depth
 function carriage_travel(type, rail_length) = rail_length - carriage_length(type); //! How far the carriage can travel on a given length rail
+function carriage_size(type)         = [ carriage_length(type), carriage_width(type), carriage_height(type) ]; //! Size of carriage
 
 function rail_holes(type, length) = //! Number of holes in a rail given its `length`
     floor((length - 2 * rail_end(type)) / rail_pitch(type)) + 1;
@@ -74,6 +75,8 @@ module carriage_hole_positions(type) { //! Position children over screw holes
 }
 
 module carriage(type, end_colour = grey(20), wiper_colour = grey(20)) { //! Draw the specified carriage
+    vitamin(str("carriage(", type[0], "_carriage): Linear rail carriage ", type[0]));
+
     total_l = carriage_length(type);
     block_l = carriage_block_length(type);
     block_w = carriage_width(type);
@@ -142,6 +145,7 @@ module rail(type, length, colour = grey(90), use_polycircles = false) { //! Draw
     height = rail_height(type);
 
     vitamin(str("rail(", type[0], ", ", length, "): Linear rail ", type[0], " x ", length, "mm"));
+    assert(rail_end(type) < (rail_pitch(type) - rail_bore(type)) / 2, type[0]);
 
     color(colour) {
         rbr = rail_bore(type) / 2;

vitamins/rails.scad

@@ -20,26 +20,29 @@
 //
 // Rails
 //
-//                Wr  Hr    E     P   D    d    h                                       go    gw
+//                Wr  Hr  Emin    P   D    d    h                                       go    gw
 MGN5 = [ "MGN5",   5,  3.6,  5,   15, 3.6, 2.4, 0.8, M2_cs_cap_screw, M2_cs_cap_screw,  1,    1 ]; // Screw holes too small for M2 heads
 MGN7 = [ "MGN7",   7,  5,    5,   15, 4.3, 2.4, 2.6, M2_cap_screw,    M2_cs_cap_screw,  1.5,  1.5 ];
 MGN9 = [ "MGN9",   9,  6,    5,   20, 6.0, 3.5, 3.5, M3_cap_screw,    M3_cs_cap_screw,  1.5,  1.5 ];
-MGN12 =[ "MGN12", 12,  8,   10,   25, 6.0, 3.5, 4.5, M3_cap_screw,    M3_cs_cap_screw,  2.25, 2.75];
+MGN12 =[ "MGN12", 12,  8,  7.5,   25, 6.0, 3.5, 4.5, M3_cap_screw,    M3_cs_cap_screw,  2.25, 2.75];
 MGN15 =[ "MGN15", 15, 10,   10,   40, 6.0, 3.5, 5.0, M3_cap_screw,    M3_cs_cap_screw,  2.5,  2.75 ];
 SSR15= [ "SSR15", 15, 12.5, 10,   60, 7.5, 4.5, 5.3, M4_cap_screw,    M4_cs_cap_screw,  2.5,  2.75 ];
 //
 // Carriages
 //
-//                  L     L1    W   H   H1   C   B
-MGN5_carriage   = [ 16,    9.6, 12,  6, 1.5, 0,   8, M2_cap_screw, MGN5 ];
-MGN7C_carriage  = [ 23,   14.3, 17,  8, 1.5, 8,  12, M2_cap_screw, MGN7 ];
-MGN9C_carriage  = [ 29.7, 20.8, 20, 10, 2,  10,  15, M3_cap_screw, MGN9 ];
-MGN12C_carriage = [ 34.7, 21.7, 27, 13, 3,  15,  20, M3_cap_screw, MGN12 ];
-MGN12H_carriage = [ 45.4, 32.4, 27, 13, 3,  20,  20, M3_cap_screw, MGN12 ];
-MGN15C_carriage = [ 43.3, 27.7, 32, 16, 4,  20,  25, M3_cap_screw, MGN15 ];
-SSR15_carriage  = [ 40.3, 23.3, 34, 24, 4.5, 0,  26, M4_cap_screw, SSR15 ];
+//                           L     L1    W   H   H1   C    B
+MGN5C_carriage  = ["MGN5C",  16,    9.6, 12,  6, 1.5, 0,   8, M2_cap_screw, MGN5 ];
+MGN7C_carriage  = ["MGN7C",  23,   14.3, 17,  8, 1.5, 8,  12, M2_cap_screw, MGN7 ];
+MGN7H_carriage  = ["MGN7H",  30.8, 21.8, 17,  8, 1.5,13,  12, M2_cap_screw, MGN7 ];
+MGN9C_carriage  = ["MGN9C",  29.7, 20.8, 20, 10, 2,  10,  15, M3_cap_screw, MGN9 ];
+MGN9H_carriage  = ["MGN9H",  39.9, 29.9, 20, 10, 2,  16,  15, M3_cap_screw, MGN9 ];
+MGN12C_carriage = ["MGN12C", 34.7, 21.7, 27, 13, 3,  15,  20, M3_cap_screw, MGN12 ];
+MGN12H_carriage = ["MGN12H", 45.4, 32.4, 27, 13, 3,  20,  20, M3_cap_screw, MGN12 ];
+MGN15C_carriage = ["MGN15C", 43.3, 27.7, 32, 16, 4,  20,  25, M3_cap_screw, MGN15 ];
+SSR15_carriage  = ["SSR15",  40.3, 23.3, 34, 24, 4.5, 0,  26, M4_cap_screw, SSR15 ];
 
+rails = [MGN5, MGN7, MGN9, MGN12, MGN15, SSR15];
 
-carriages = [MGN5_carriage, MGN7C_carriage, MGN9C_carriage, MGN12C_carriage, MGN12H_carriage, MGN15C_carriage, SSR15_carriage];
+carriages = [MGN5C_carriage, MGN7C_carriage, MGN7H_carriage, MGN9C_carriage, MGN9H_carriage, MGN12C_carriage, MGN12H_carriage, MGN12H_carriage, MGN15C_carriage, SSR15_carriage];
 
 use <rail.scad>

vitamins/screws.scad

@@ -108,6 +108,7 @@ No2_screw        = ["No2", "No2 pan wood",      hs_pan, 2.2, 4.2, 1.7,    0,   0
 No4_screw        = ["No4", "No4 pan wood",      hs_pan, 3.0, 5.5, 2.0,    0,   0, 0 ,M3p5_washer, false,    No4_pilot_radius, No4_clearance_radius];
 No6_screw        = ["No6", "No6 pan wood",      hs_pan, 3.5, 6.7, 2.2,    0,   0, 0 ,  M4_washer, false,    No6_pilot_radius, No6_clearance_radius];
 No6_cs_screw     = ["No6_cs", "No6 cs wood",    hs_cs,  3.5, 7.0, 0,      0,   0, 0,   M4_washer, false,    No6_pilot_radius, No6_clearance_radius];
+No8_screw        = ["No8", "No8 pan wood",      hs_pan, 4.2, 8.2, 3.05,   0,   0, 0 ,  M5_washer, false,    No8_pilot_radius, No8_clearance_radius];
 
 screw_lists = [
 [ M2_cap_screw,    M2p5_cap_screw, M3_cap_screw,    M4_cap_screw,    M5_cap_screw,    M6_cap_screw, M8_cap_screw],
@@ -116,7 +117,7 @@ screw_lists = [
 [ M2_dome_screw,   0,              M3_dome_screw,   M4_dome_screw,   M5_dome_screw],
 [ 0,               0,              M3_hex_screw,    M4_hex_screw,    M5_hex_screw,    M6_hex_screw, M8_hex_screw],
 [ 0,               M2p5_pan_screw, M3_pan_screw,    M4_pan_screw,    M5_pan_screw,    M6_pan_screw, No632_pan_screw],
-[ No2_screw,       0,              No4_screw,       No6_screw,       No6_cs_screw],
+[ No2_screw,       0,              No4_screw,       No6_screw,       No8_screw,       No6_cs_screw],
 [ 0,               0,              M3_grub_screw,   M4_grub_screw]
 ];
 

vitamins/ziptie.scad

@@ -30,7 +30,7 @@ function ziptie_latch(type)     = type[3]; //! Latch dimensions
 function ziptie_colour(type)    = type[4]; //! Colour
 function ziptie_tail(type)      = type[5]; //! The length without teeth
 
-module ziptie(type, r, t = 0) //! Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t`
+module ziptie(type, r = 5, t = 0) //! Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t`
 {
     latch = ziptie_latch(type);
     lx = latch.x / 2;
@@ -50,7 +50,7 @@ module ziptie(type, r, t = 0) //! Draw specified ziptie wrapped around radius `r
     len = length <= 100 ? 100 : length;
     width =  ziptie_width(type);
 
-    vitamin(str("ziptie(", type[0], ", ", r, "): Ziptie ", width, "mm x ", len, "mm min length"));
+    vitamin(str("ziptie(", type[0], "): Ziptie ", width, "mm x ", len, "mm min length"));
 
     color(ziptie_colour(type)){
         linear_extrude(width, center = true)