Workarounds for bugs in the OpenSCAD snapshots.

Updated changelog.
Parametric potentiometers added, changes PCB "potentiometer" parameters.
2025-09-04 04:35:29 +02:00 · 2021-09-12 18:02:43 +01:00 · 2021-09-11 12:02:53 +01:00 · 2021-09-11 12:01:04 +01:00 · 2021-09-11 11:54:26 +01:00 · 2021-09-11 11:51:24 +01:00
83 changed files with 10338 additions and 9043 deletions
--- a/CHANGELOG.md
+++ b/CHANGELOG.md
@@ -3,6 +3,78 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.


+## [v16.0.0](https://github.com/nophead/NopSCADlib/releases/tag/v16.0.0 "show release") Breaking Changes [...](https://github.com/nophead/NopSCADlib/compare/v15.25.0...v16.0.0 "diff with v15.25.0")
+*   2021-09-11 [`3299aad`](https://github.com/nophead/NopSCADlib/commit/3299aad5c83d1fe21d3bdddd1450f8de19078d13 "show commit") [C.P.](# "Chris Palmer") Parametric potentiometers added, changes PCB "potentiometer" parameters.
+The first one is now the type that defaults to the previous BigTreeTech version.
+The second parameter is the shaft length override.
+
+ * Added `ESP32_DOIT_V1,` ArduinoNano and `KY_040` breakout PCBs.
+
+*   2021-09-11 [`74c52aa`](https://github.com/nophead/NopSCADlib/commit/74c52aac0428995930b4af562a480025003b992d "show commit") [C.P.](# "Chris Palmer") Can now make perfboard without screw holes.
+Fixed missing items from last commit.
+
+*   2021-09-11 [`726d9ed`](https://github.com/nophead/NopSCADlib/commit/726d9ed2dc921b5a7ef8c5b0fa6b17628f706bf8 "show commit") [C.P.](# "Chris Palmer") Can now draw right angle Molex KK connectors and can skip pins to allow high voltage.
+
+*   2021-09-11 [`8a838dd`](https://github.com/nophead/NopSCADlib/commit/8a838dd1ceaac7d595aea47494cb28b9a424ee8a "show commit") [C.P.](# "Chris Palmer") Added `pcb_grid_components()` module for placing parts on a perfboard.
+
+*   2021-09-11 [`181c6ac`](https://github.com/nophead/NopSCADlib/commit/181c6ac6248e7db6204b6d461f122e719492b0cc "show commit") [C.P.](# "Chris Palmer") Added `vero_pin` PCB component.
+
+*   2021-09-11 [`e952aa7`](https://github.com/nophead/NopSCADlib/commit/e952aa7840cf4f3765c518a481d32f582bef27b4 "show commit") [C.P.](# "Chris Palmer") PCB chip component can now be round if width is zero to fake round buttons.
+
+*   2021-09-11 [`466ee31`](https://github.com/nophead/NopSCADlib/commit/466ee31e10e670ff35e22429084a34612f821f7d "show commit") [C.P.](# "Chris Palmer") Added `Jack_4mm_shielded_nut_radius()`.
+
+*   2021-09-11 [`4c926c5`](https://github.com/nophead/NopSCADlib/commit/4c926c529b199dbe589fb0c43f323db94ffe5597 "show commit") [C.P.](# "Chris Palmer") Fixed axial lead min pitch bug.
+
+*   2021-09-11 [`edb1ecc`](https://github.com/nophead/NopSCADlib/commit/edb1eccbf156ff4b06723b18f832637328b1c3e0 "show commit") [C.P.](# "Chris Palmer") TFT128x160 LCD display added.
+
+*   2021-09-11 [`061812c`](https://github.com/nophead/NopSCADlib/commit/061812cc8bc51e5a957d7d3acaffd9bcda14cc15 "show commit") [C.P.](# "Chris Palmer") PMMA1p25 sheet added.
+
+*   2021-09-11 [`ce0c97b`](https://github.com/nophead/NopSCADlib/commit/ce0c97b45e6e501554e66bcd4140d4dd3f532a1c "show commit") [C.P.](# "Chris Palmer") `7_segment` displays added as PCB component.
+
+### [v15.25.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.25.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.24.0...v15.25.0 "diff with v15.24.0")
+*   2021-09-05 [`2166a9b`](https://github.com/nophead/NopSCADlib/commit/2166a9be6a6fc75b06f0051971606cd181079e15 "show commit") [C.P.](# "Chris Palmer") `extrusion_corner_bracket_assembly()` and `extrusion_inner_corner_bracket()` can now be passed the extrusion type.
+E2020t and E4040t thinner extrusions added to work with the brackets.
+Extrusions can now have recessed channels, round or square centre sections and holes.
+Fixed the shape of extrusion centre section spars.
+T-nuts now have 45 degree chamfers instead of a fixed 1mm minimum thickness.
+
+*   2021-09-03 [`5117290`](https://github.com/nophead/NopSCADlib/commit/511729008dcc878a148c3bbd00edf69de9736fb5 "show commit") [C.P.](# "Chris Palmer") Added missing documentation for `sliding_t_nut()`.
+
+*   2021-09-03 [`5111ec0`](https://github.com/nophead/NopSCADlib/commit/5111ec04bc1d19cc46b811bf79d026fcd2ca70f8 "show commit") [C.P.](# "Chris Palmer") `E40_corner_bracket,` `E40_corner_bracket` and `M8_sliding_ball_t_nut` added.
+Inner corner brackets now show the long arm with chamfered ridges rather
+than a normal T-nut and the grub screws are inserted to meet the extrusion.
+
+### [v15.24.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.24.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.23.0...v15.24.0 "diff with v15.23.0")
+*   2021-08-31 [`d9af5b7`](https://github.com/nophead/NopSCADlib/commit/d9af5b7f705791ca8ef230ecd1b831c042587002 "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2021-08-31 [`9d65f69`](https://github.com/nophead/NopSCADlib/commit/9d65f69bf3e7cd325d24bc5410a4763bb7164b8f "show commit") [M.B.](# "Martin Budden") Added `M2p5_dome_screw`.
+
+### [v15.23.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.23.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.22.0...v15.23.0 "diff with v15.22.0")
+*   2021-08-31 [`00c5c90`](https://github.com/nophead/NopSCADlib/commit/00c5c90a5e74f47f0e6f5e3a7996f70fa34f0833 "show commit") [C.P.](# "Chris Palmer") Updated big picture
+
+*   2021-08-31 [`01c26d8`](https://github.com/nophead/NopSCADlib/commit/01c26d8a349e802738a8b0d06575a3e6915bf070 "show commit") [C.P.](# "Chris Palmer") Added Lichuan servo motors contributed by Niclas Hedhman.
+
+*   2021-08-31 [`ef21024`](https://github.com/nophead/NopSCADlib/commit/ef2102420b15e5be4008a6a3cecf5416857265f9 "show commit") [C.P.](# "Chris Palmer") Added NEMA8 and NEMA8BH stepper motors.
+Steppers can now have dual shafts, hollow shafts and black end caps.
+
+*   2021-08-31 [`540f841`](https://github.com/nophead/NopSCADlib/commit/540f84116355e7f44a9b5796816d1e3422128ff3 "show commit") [C.P.](# "Chris Palmer") Added crude representation of JST ZH connectors.
+
+*   2021-08-31 [`1045502`](https://github.com/nophead/NopSCADlib/commit/1045502efb1cb94fb7bcc11fd4483b425a880926 "show commit") [C.P.](# "Chris Palmer") Added more aluminium sheet thickness
+
+*   2021-08-31 [`485184f`](https://github.com/nophead/NopSCADlib/commit/485184f09213ff0b191d5c8339471cd24ba3cc90 "show commit") [C.P.](# "Chris Palmer") Added HGH15CA and HGH20CA rails.
+
+*   2021-08-31 [`b893c90`](https://github.com/nophead/NopSCADlib/commit/b893c9069a6bae762733cf1e139d49bab28ad792 "show commit") [C.P.](# "Chris Palmer") Added SFU1610 ballscrew nut
+
+*   2021-08-31 [`69f4ced`](https://github.com/nophead/NopSCADlib/commit/69f4ced29da7e37c88ca24b924c6430144eec849 "show commit") [C.P.](# "Chris Palmer") Added `M8_cs_cap_screw,` `M5_grub_screw` and `M6_grub_screw`.
+Fixed `M6_cs_cap_screw` and `M4_grub_screw` socket sizes.
+
+*   2021-08-31 [`5c1aa84`](https://github.com/nophead/NopSCADlib/commit/5c1aa849fe5992617c3128c47dfc969504cbfd2f "show commit") [C.P.](# "Chris Palmer") New layout for big picture.
+
+### [v15.22.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.22.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.21.1...v15.22.0 "diff with v15.21.1")
+*   2021-08-27 [`1247303`](https://github.com/nophead/NopSCADlib/commit/1247303cb9dc2694994993b5dc046683becb7fde "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2021-08-13 [`14ab1bb`](https://github.com/nophead/NopSCADlib/commit/14ab1bb8b614055e0bf4ad33799276b0017ca13e "show commit") [M.B.](# "Martin Budden") Added Raspberry Pi Pico.
+
 #### [v15.21.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.21.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.21.0...v15.21.1 "diff with v15.21.0")
 *   2021-08-09 [`be53547`](https://github.com/nophead/NopSCADlib/commit/be53547728834d8e786ad4cb5637c768320a3105 "show commit") [M.B.](# "Martin Budden") Fixed display of BLDC prop shaft when thread length `=` 0.

--- a/examples/MainsBreakOutBox/stls/foot.stl
+++ b/examples/MainsBreakOutBox/stls/foot.stl
--- a/examples/MainsBreakOutBox/stls/socket_box.stl
+++ b/examples/MainsBreakOutBox/stls/socket_box.stl
--- a/global_defs.scad
+++ b/global_defs.scad
@@ -24,13 +24,10 @@
 //  bom defaults to 0
 //  Setting $bom on the command line or in the main file before including lib.scad overrides it everywhere.
 //  Setting $bom after including lib overrides bom in the libs but not in the local file.
-//  Setting $_bom in the local file overrides it in the local file but not in the libs.
 //
 rr_green = [0, 146/255, 0];                                               // RepRap logo colour
 crimson  = [220/255, 20/255, 60/255];

-$_bom           = is_undef($bom)             ? 0      : $bom;             // 0 no bom, 1 assemblies and stls, 2 vitamins as well
-$exploded       = is_undef($explode)         ? 0      : $explode;         // 1 for exploded view
 layer_height    = is_undef($layer_height)    ? 0.25   : $layer_height;    // layer height when printing
 extrusion_width = is_undef($extrusion_width) ? 0.5    : $extrusion_width; // filament width when printing
 nozzle          = is_undef($nozzle)          ? 0.45   : $nozzle;          // 3D printer nozzle
--- a/lib.scad
+++ b/lib.scad
@@ -55,6 +55,7 @@ include <vitamins/pulleys.scad>
 include <vitamins/ring_terminals.scad>
 include <vitamins/rails.scad>
 include <vitamins/rod.scad>
+include <vitamins/servo_motors.scad>
 include <vitamins/shaft_couplings.scad>
 include <vitamins/sheets.scad>
 include <vitamins/sk_brackets.scad>
--- a/libtest.png
+++ b/libtest.png
--- a/libtest.scad
+++ b/libtest.scad
@@ -41,6 +41,7 @@
 //
 include <lib.scad>

+use <tests/7_segments.scad>
 use <tests/ball_bearings.scad>
 use <tests/batteries.scad>
 use <tests/bearing_blocks.scad>
@@ -83,6 +84,7 @@ use <tests/panel_meters.scad>
 use <tests/PCBs.scad>
 use <tests/pillars.scad>
 use <tests/pillow_blocks.scad>
+use <tests/potentiometers.scad>
 use <tests/press_fit.scad>
 use <tests/PSUs.scad>
 use <tests/pulleys.scad>
@@ -92,6 +94,7 @@ use <tests/rockers.scad>
 use <tests/rod.scad>
 use <tests/screws.scad>
 use <tests/sealing_strip.scad>
+use <tests/servo_motors.scad>
 use <tests/shaft_couplings.scad>
 use <tests/sheets.scad>
 use <tests/SK_brackets.scad>
@@ -185,16 +188,15 @@ translate([x5, cable_grommets_y + 250])
 translate([950, 600])
    box_test();

-translate([830, 770])
+translate([900, 750])
    pocket_handles();

-translate([950, 750])
+translate([900, 850])
    printed_boxes();

-translate([850, 1330])
+translate([850, 1330 + 85])
    bbox_test();

-
 inserts_y = 0;
 nuts_y = inserts_y + 20;
 washers_y = nuts_y + 120;
@@ -206,13 +208,14 @@ sealing_strip_y = springs_y + 20;
 tubings_y = sealing_strip_y + 20;
 pillars_y = tubings_y + 20;
 ball_bearings_y = pillars_y + 40;
-pulleys_y = ball_bearings_y +40;
-hot_ends_y = pulleys_y + 60;
-linear_bearings_y = hot_ends_y + 50;
-sheets_y = linear_bearings_y + 90;
+pulleys_y = ball_bearings_y + 40;
+leadnuts_y = pulleys_y + 60;
+linear_bearings_y = leadnuts_y + 50;
+steppers_y = linear_bearings_y + 110;
+sheets_y = steppers_y + 55;
 pcbs_y = sheets_y + 60;
-displays_y = pcbs_y + 170;
-fans_y = displays_y + 80;
+displays_y = pcbs_y + 140;
+fans_y = displays_y + 110;
 transformers_y = fans_y + 120;
 psus_y = transformers_y + 190;

@@ -255,13 +258,16 @@ translate([x0, ball_bearings_y])
 translate([x0, pulleys_y])
    pulleys();

+translate([x0, leadnuts_y])
+    leadnuts();
+
 translate([x0, linear_bearings_y]) {
    linear_bearings();
    rods();
 }

-translate([x0 + 10, hot_ends_y])
-    hot_ends();
+translate([x0, steppers_y])
+    stepper_motors();

 translate([x0, sheets_y])
    sheets();
@@ -279,7 +285,7 @@ translate([x0, fans_y]) {
        fan_guards();
 }

-translate([x0, transformers_y])
+translate([760, fans_y])
    variacs();

 translate([x0, psus_y]) {
@@ -291,7 +297,6 @@ translate([x0, psus_y]) {
 zipties_y = 0;
 bulldogs_y = zipties_y + 30;
 swiss_clips_y = bulldogs_y + 35;
-leadnuts_y = swiss_clips_y + 50;

 translate([x1, zipties_y])
    zipties();
@@ -302,10 +307,6 @@ translate([x1, bulldogs_y])
 translate([x1, swiss_clips_y])
    swiss_clips();

-translate([x1, leadnuts_y])
-    leadnuts();
-
-
 leds_y = 0;
 carriers_y = leds_y + 40;
 magnets_y = carriers_y + 40;
@@ -362,9 +363,9 @@ iecs_y = d_connectors_y + 80;
 modules_y = iecs_y + 60;
 ssrs_y = modules_y + 80;
 blowers_y = ssrs_y + 60;
-batteries_y = blowers_y + 100;
-steppers_y = batteries_y + 55;
-panel_meters_y = steppers_y + 70;
+hot_ends_y = blowers_y + 100;
+batteries_y = hot_ends_y + 55;
+panel_meters_y = batteries_y + 70;
 extrusions_y = panel_meters_y + 80;

 translate([x3, veroboard_y])
@@ -409,8 +410,8 @@ translate([x3, blowers_y])
 translate([x3, batteries_y])
    batteries();

-translate([x2, steppers_y])  // interloper
-    stepper_motors();
+translate([x3 + 10, hot_ends_y])
+    hot_ends();

 translate([x2, panel_meters_y])
    panel_meters();
@@ -418,7 +419,7 @@ translate([x2, panel_meters_y])
 translate([x2, extrusions_y])
    extrusions();

-translate([x3, transformers_y])
+translate([400, transformers_y])
    transformers();


@@ -426,18 +427,21 @@ belts_y = 0;
 rails_y = belts_y + 200;
 extrusion_brackets_y = rails_y + 250;
 sk_brackets_y = extrusion_brackets_y + 80;
-kp_pillow_blocks_y = sk_brackets_y + 50;
+kp_pillow_blocks_y = sk_brackets_y + 60;
 scs_bearing_blocks_y = kp_pillow_blocks_y + 60;
-cable_strip_y = fans_y + 50;
-box_sections_y = cable_strip_y;
-BLDC_y = sheets_y;
+box_sections_y = batteries_y;
+BLDC_y = scs_bearing_blocks_y + 120;
+pot_y = BLDC_y + 40;
+cable_strip_y = pot_y + 50;
+
+translate([0, transformers_y])
+    servo_motors();

 translate([x4 + 200, belts_y + 58]) {
    belt_test();

    translate([0, 60])
        opengrab_test();
-
 }

 translate([x4 + 175, belts_y, -20])
@@ -446,7 +450,7 @@ translate([x4 + 175, belts_y, -20])
 translate([x4, rails_y + 130])
    rails();

-translate([770, cable_strip_y])
+translate([x4, cable_strip_y])
    cable_strips();

 translate([x4, kp_pillow_blocks_y])
@@ -458,7 +462,7 @@ translate([x4, sk_brackets_y])
 translate([x4, extrusion_brackets_y])
    extrusion_brackets();

-translate([x4 + 120, extrusion_brackets_y])
+translate([x1, swiss_clips_y + 50])
    shaft_couplings();

 translate([x4, scs_bearing_blocks_y])
@@ -467,7 +471,10 @@ translate([x4, scs_bearing_blocks_y])
 translate([x4, BLDC_y])
    bldc_motors();

-translate([x6, box_sections_y])
+translate([x4, pot_y])
+    potentiometers();
+
+translate([x2, box_sections_y])
    box_sections();

 translate([x6, 125])
--- a/readme.md
+++ b/readme.md
@@ -21,33 +21,64 @@ A list of changes classified as breaking, additions or fixes is maintained in [C
 ## Table of Contents<a name="top"/>
 <table><tr>
 <th align="left"> Vitamins A-H </th><th align="left"> Vitamins I-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
-<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
-<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
-<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
-<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
-<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
-<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
-<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
-<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#7_segments">7_segments</a> </td><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
+<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
+<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
+<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
+<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
+<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
+<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
+<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
+<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Potentiometers">Potentiometers</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td></td><td></td><td></td><td></td></tr>
 </table>

+---
+<a name="7_segments"></a>
+## 7_segments
+7 Segment displays
+
+[vitamins/7_segments.scad](vitamins/7_segments.scad) Object definitions.
+
+[vitamins/7_segment.scad](vitamins/7_segment.scad) Implementation.
+
+[tests/7_segments.scad](tests/7_segments.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `7_segment_digit_size(type)` | Size of the actual digit and segemnt width and angle |
+| `7_segment_pin_pitch(type)` | x and y pin pitches and pin diameter |
+| `7_segment_pins(type)` | None |
+| `7_segment_size(type)` | Size of the body |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `7_segment_digit(type, colour = grey(95)` | Draw the specified 7 segment digit |
+| `7_segment_digits(type, n, colour = grey(70)` | Draw n digits side by side |
+
+![7_segments](tests/png/7_segments.png)
+
+
+<a href="#top">Top</a>
+
 ---
 <a name="Axials"></a>
 ## Axials
@@ -941,6 +972,7 @@ LCD displays.
 | ---:|:--- |:---|
 |   1 | `display(BigTreeTech_TFT35v3_0)` |  BigTreeTech TFT35 v3.0 |
 |   1 | `display(HDMI5)` |  HDMI display 5" |
+|   1 | `display(TFT128x160)` |  LCD TFT ST7735 display 128x160 |
 |   1 | `display(LCD1602A)` |  LCD display 1602A |
 |   1 | `display(LCDS7282B)` |  LCD display S-7282B |
 |   1 | `display(SSD1963_4p3)` |  LCD display SSD1963 4.3" |
@@ -963,34 +995,47 @@ Brackets for joining extrusions at a corner.
 | Function | Description |
 |:--- |:--- |
 | `extrusion_corner_bracket_base_thickness(type)` | Thickness of base of bracket |
+| `extrusion_corner_bracket_extrusion(type)` | Default extrusion this bracket is for |
 | `extrusion_corner_bracket_hole_offset(type)` | Hole offset from corner |
 | `extrusion_corner_bracket_side_thickness(type)` | Thickness of side of bracket |
 | `extrusion_corner_bracket_size(type)` | Size of bracket |
+| `extrusion_corner_bracket_tnut(type)` | The sliding t-nut to use in the assembly |
+| `extrusion_inner_corner_bracket_extrusion(type)` | Default extrusion this bracket is for |
+| `extrusion_inner_corner_bracket_screw_offsets(type)` | Screw offsets from the ends |
 | `extrusion_inner_corner_bracket_size(type)` | Size of inner bracket |
+| `extrusion_inner_corner_bracket_tnut(type)` | The sliding t-nut it is based on |

 ### Modules
 | Module | Description |
 |:--- |:--- |
 | `extrusion_corner_bracket(type)` | Corner bracket for extrusion |
-| `extrusion_corner_bracket_assembly(type, part_thickness = 2, screw_type = M4_cap_screw, nut_type = M4_sliding_t_nut, max_screw_depth = 6)` | Assembly with fasteners in place |
+| `extrusion_corner_bracket_assembly(type, part_thickness = undef, screw_type = undef, nut_type = undef, max_screw_depth = undef, extrusion = undef)` | Assembly with fasteners in place |
 | `extrusion_corner_bracket_hole_positions(type)` | Place children at hole positions |
-| `extrusion_inner_corner_bracket(type, grub_screws = true)` | Inner corner bracket for extrusion |
+| `extrusion_inner_corner_bracket(type, grub_screws = true, backwards = false, extrusion = undef)` | Inner corner bracket for extrusion |

 ![extrusion_brackets](tests/png/extrusion_brackets.png)

 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `extrusion(E2020, 20)` |  Extrusion E2020 x 20mm |
-|   1 | `extrusion(E2020, 30)` |  Extrusion E2020 x 30mm |
-|   1 | `extrusion(E2020, 40)` |  Extrusion E2020 x 40mm |
-|   1 | `extrusion(E2020, 50)` |  Extrusion E2020 x 50mm |
-|   2 | `extrusion_corner_bracket(E20_corner_bracket)` |  Extrusion corner bracket 20 |
-|   2 | `extrusion_inner_corner_bracket(E20_inner_corner_bracket, true)` |  Extrusion inner corner bracket 4.5 |
-|   1 | `extrusion_inner_corner_bracket(E20_inner_corner_bracket, false)` |  Extrusion inner corner bracket 4.5 |
+|   2 | `extrusion(E2020t, 20.5)` |  Extrusion E2020t x 20.5mm |
+|   1 | `extrusion(E2020t, 28)` |  Extrusion E2020t x 28mm |
+|   2 | `extrusion(E2020t, 39.5)` |  Extrusion E2020t x 39.5mm |
+|   1 | `extrusion(E2020t, 48)` |  Extrusion E2020t x 48mm |
+|   1 | `extrusion(E4040t, 27.4, cornerHole = true)` |  Extrusion E4040t x 27.4mm |
+|   1 | `extrusion(E4040t, 40, cornerHole = true)` |  Extrusion E4040t x 40mm |
+|   1 | `extrusion(E4040t, 60.4, cornerHole = true)` |  Extrusion E4040t x 60.4mm |
+|   1 | `extrusion(E4040t, 80, cornerHole = true)` |  Extrusion E4040t x 80mm |
+|   2 | `extrusion_corner_bracket(E20_corner_bracket)` |  Extrusion corner bracket 20mm for E2020t |
+|   2 | `extrusion_corner_bracket(E40_corner_bracket)` |  Extrusion corner bracket 35mm for E4040t |
+|   4 | `extrusion_inner_corner_bracket(E20_inner_corner_bracket)` |  Extrusion inner corner bracket for E2020t |
+|   2 | `extrusion_inner_corner_bracket(E40_inner_corner_bracket)` |  Extrusion inner corner bracket for E4040t |
 |   4 | `sliding_t_nut(M4_sliding_t_nut)` |  Nut M4 sliding T |
+|   4 | `sliding_t_nut(M8_sliding_ball_t_nut)` |  Nut M8 sliding T with spring loaded ball |
 |   4 | `screw(M4_cap_screw, 8)` |  Screw M4 cap x  8mm |
+|   4 | `screw(M8_cap_screw, 12)` |  Screw M8 cap x 12mm |
 |   4 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
+|   4 | `washer(M8_washer)` |  Washer  M8 x 17mm x 1.6mm |


 <a href="#top">Top</a>
@@ -1009,17 +1054,25 @@ Aluminium  extrusion.
 ### Properties
 | Function | Description |
 |:--- |:--- |
-| `extrusion_center_hole(type)` | Diameter of center hole |
-| `extrusion_center_square(type)` | Size of center square |
+| `extrusion_center_hole_wd(type)` | Diameter of center hole if -ve or square side if +ve |
+| `extrusion_center_square_wd(type)` | Size of center square if +ve or tube diameter if -ve |
+| `extrusion_channel_recess(type)` | Channel recess width and depth or false in none |
 | `extrusion_channel_width(type)` | Channel width |
 | `extrusion_channel_width_internal(type)` | Internal channel width |
-| `extrusion_corner_hole(type)` | Diameter of corner hole |
+| `extrusion_corner_hole_wd(type)` | Diameter of corner hole if -ve or square side if +ve |
 | `extrusion_fillet(type)` | Radius of corner fillet |
 | `extrusion_height(type)` | Height of extrusion |
 | `extrusion_spar_thickness(type)` | Spar thickness |
 | `extrusion_tab_thickness(type)` | Tab thickness |
 | `extrusion_width(type)` | Width of extrusion |

+### Functions
+| Function | Description |
+|:--- |:--- |
+| `extrusion_center_hole(type)` | Diameter of center hole or side if square |
+| `extrusion_center_square(type)` | Size of center square or tube |
+| `extrusion_corner_hole(type)` | Diameter of corner hole or side if square |
+
 ### Modules
 | Module | Description |
 |:--- |:--- |
@@ -1032,12 +1085,14 @@ Aluminium  extrusion.
 | ---:|:--- |:---|
 |   1 | `extrusion(E1515, 80)` |  Extrusion E1515 x 80mm |
 |   1 | `extrusion(E2020, 80)` |  Extrusion E2020 x 80mm |
+|   1 | `extrusion(E2020t, 80)` |  Extrusion E2020t x 80mm |
 |   1 | `extrusion(E2040, 80)` |  Extrusion E2040 x 80mm |
 |   1 | `extrusion(E2060, 80)` |  Extrusion E2060 x 80mm |
 |   1 | `extrusion(E2080, 80)` |  Extrusion E2080 x 80mm |
 |   1 | `extrusion(E3030, 80, cornerHole = true)` |  Extrusion E3030 x 80mm |
 |   1 | `extrusion(E3060, 80, cornerHole = true)` |  Extrusion E3060 x 80mm |
 |   1 | `extrusion(E4040, 80, cornerHole = true)` |  Extrusion E4040 x 80mm |
+|   1 | `extrusion(E4040t, 80, cornerHole = true)` |  Extrusion E4040t x 80mm |
 |   1 | `extrusion(E4080, 80, cornerHole = true)` |  Extrusion E4080 x 80mm |


@@ -1470,6 +1525,7 @@ E.g. a "brown" socket for mains live needs to be displayed as "sienna" to look r
 |:--- |:--- |
 | `jack_4mm_hole_radius()` | Panel hole radius for 4mm jack |
 | `jack_4mm_shielded_hole_radius()` | Panel hole radius for 4mm shielded jack |
+| `jack_4mm_shielded_nut_radius()` | Largest diameter of 4mm shielded jack |
 | `post_4mm_diameter()` | Outer diameter of 4mm binding post |

 ### Modules
@@ -1547,9 +1603,11 @@ Nuts for leadscrews.
 | Function | Description |
 |:--- |:--- |
 | `leadnut_bore(type)` | Thread size |
+| `leadnut_colour(type)` | The colour |
 | `leadnut_flange_dia(type)` | Flange diameter |
 | `leadnut_flange_offset(type)` | Offset of the flange from the top |
 | `leadnut_flange_t(type)` | Flange thickness |
+| `leadnut_flat(type)` | Flat section width |
 | `leadnut_height(type)` | Total height |
 | `leadnut_hole_dia(type)` | The diameter of the screw holes |
 | `leadnut_hole_pitch(type)` | The radial pitch of the screw holes |
@@ -1577,6 +1635,7 @@ Nuts for leadscrews.
 | ---:|:--- |:---|
 |   1 | `leadnut(LSN8x2)` |  Leadscrew nut 8 x 2 |
 |   1 | `leadnut(LSN8x8)` |  Leadscrew nut 8 x 8 RobotDigg |
+|   1 | `leadnut(SFU1610)` |  Leadscrew nut for SFU1610 |


 <a href="#top">Top</a>
@@ -2045,6 +2104,7 @@ If a nut is given a child then it gets placed on its top surface.
 | `nut_thickness(type, nyloc = false)` | Thickness of plain or nyloc version |
 | `nut_trap_flat_radius(nut, horizontal = false)` | Radius across the flats of a nut trap |
 | `nut_trap_radius(nut, horizontal = false)` | Radius across the corners of a nut trap |
+| `t_nut_tab(type)` | Sliding t-nut T dimensions |

 ### Modules
 | Module | Description |
@@ -2053,6 +2113,7 @@ If a nut is given a child then it gets placed on its top surface.
 | `nut_and_washer(type, nyloc)` | Draw nut with corresponding washer |
 | `nut_square(type, brass = false, nylon = false)` | Draw specified square nut |
 | `nut_trap(screw, nut, depth = 0, horizontal = false, supported = false, h = 200)` | Make a nut trap |
+| `sliding_t_nut(type)` | Draw a sliding T nut, T nut with a spring loaded ball or a hammer nut. |
 | `wingnut(type)` | Draw a wingnut |

 ![nuts](tests/png/nuts.png)
@@ -2080,10 +2141,12 @@ If a nut is given a child then it gets placed on its top surface.
 |   1 | `nut(M5_nut)` |  Nut M5 x 4mm  |
 |   1 | `nut(M5_nut, nyloc = true)` |  Nut M5 x 4mm nyloc |
 |   1 | `nut(M5nS_thin_nut)` |  Nut M5nS 8 x 2.7mm  |
+|   1 | `sliding_t_nut(M6_sliding_t_nut)` |  Nut M6 hammer |
 |   1 | `nut(M6_half_nut)` |  Nut M6 x 3mm  |
 |   1 | `nut(M6_nut)` |  Nut M6 x 5mm  |
 |   1 | `nut(M6_nut, nyloc = true)` |  Nut M6 x 5mm nyloc |
 |   1 | `nut(M6nS_thin_nut)` |  Nut M6nS 10 x 3.2mm  |
+|   1 | `sliding_t_nut(M8_sliding_ball_t_nut)` |  Nut M8 sliding T with spring loaded ball |
 |   1 | `nut(M8_nut)` |  Nut M8 x 6.5mm  |
 |   1 | `nut(M8_nut, nyloc = true)` |  Nut M8 x 6.5mm nyloc |
 |   1 | `nut(M8nS_thin_nut)` |  Nut M8nS 13 x 4mm  |
@@ -2277,12 +2340,12 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `barrel_jack(cutout = false)` | Draw barrel power jack |
 | `block(size, colour, makes_cutout, cutouts)` | Draw a coloured cube to represent a random PCB component |
 | `buzzer(height, diameter, colour)` | Draw PCB buzzer with specified height, diameter and colour |
-| `chip(length, width, thickness, colour, cutout = false)` | Draw a coloured cube to represent a chip, or other rectangular component |
+| `chip(length, width, thickness, colour, cutout = false)` | Draw a coloured cube to represent a chip, or other rectangular component, or cylinder if width is zero |
 | `flat_flex(type, cutout = false)` | Draw flat flexistrip connector as used on RPI0 |
 | `flex(cutout = false)` | Draw flexistrip connector |
 | `hdmi(type, cutout = false)` | Draw HDMI socket |
 | `jack(cutout = false)` | Draw 3.5mm jack |
-| `molex_254(ways)` | Draw molex header |
+| `molex_254(ways, right_angle = 0, skip = undef)` | Draw molex header, set `right_angle` to 1 for normal right angle version or -1 for inverted right angle version. |
 | `molex_usb_Ax1(cutout)` | Draw Molex USB A connector suitable for perf board |
 | `molex_usb_Ax2(cutout)` | Draw Molex dual USB A connector suitable for perf board |
 | `pcb(type)` | Draw specified PCB |
@@ -2293,6 +2356,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `pcb_components(type, cutouts = false, angle = undef)` | Draw list of PCB components on the PCB |
 | `pcb_cutouts(type, angle = undef)` | Make cut outs to clear components on a PCB |
 | `pcb_grid(type, x, y, z = 0)` | Positions children at specified grid position |
+| `pcb_grid_components(type, components, cutouts = false, angle = undef)` | Draw list of components on the PCB grid for perf board |
 | `pcb_screw_positions(type)` | Positions children at the mounting hole positions |
 | `pcb_spacer(screw, height, wall = 1.8, taper = 0)` | Generate STL for PCB spacer |
 | `rj45(cutout = false)` | Draw RJ45 Ethernet connector |
@@ -2305,6 +2369,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `usb_B(cutout = false)` | Draw USB B connector |
 | `usb_C(cutout = false)` | Draw USB C connector |
 | `usb_uA(cutout = false)` | Draw USB micro A connector |
+| `vero_pin(cropped = false)` | Draw a vero pin |

 ![pcb](tests/png/pcb.png)

@@ -2355,7 +2420,8 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `green_terminal(gt_5x17, 3)` |  Terminal block 3 way 5mm |
 |   2 | `green_terminal(gt_3p5, 4)` |  Terminal block 4 way 3.5mm |
 |   1 | `terminal_35(4)` |  Terminal block 4 way 3.5mm |
-|   1 | `pcb(TestPCB)` |  Test PCB |
+|   1 | `pcb(test_pcb)` |  Test PCB |
+|   2 | `vero_pin()` |  Vero board pin |
 |   1 | `wire_link(0.8, 5.08, h = 10.16)` |  Wire link 0.8mm x 0.2" |
 |   1 | `wire_link(0.8, 10.16)` |  Wire link 0.8mm x 0.4" |

@@ -2418,12 +2484,12 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `barrel_jack(cutout = false)` | Draw barrel power jack |
 | `block(size, colour, makes_cutout, cutouts)` | Draw a coloured cube to represent a random PCB component |
 | `buzzer(height, diameter, colour)` | Draw PCB buzzer with specified height, diameter and colour |
-| `chip(length, width, thickness, colour, cutout = false)` | Draw a coloured cube to represent a chip, or other rectangular component |
+| `chip(length, width, thickness, colour, cutout = false)` | Draw a coloured cube to represent a chip, or other rectangular component, or cylinder if width is zero |
 | `flat_flex(type, cutout = false)` | Draw flat flexistrip connector as used on RPI0 |
 | `flex(cutout = false)` | Draw flexistrip connector |
 | `hdmi(type, cutout = false)` | Draw HDMI socket |
 | `jack(cutout = false)` | Draw 3.5mm jack |
-| `molex_254(ways)` | Draw molex header |
+| `molex_254(ways, right_angle = 0, skip = undef)` | Draw molex header, set `right_angle` to 1 for normal right angle version or -1 for inverted right angle version. |
 | `molex_usb_Ax1(cutout)` | Draw Molex USB A connector suitable for perf board |
 | `molex_usb_Ax2(cutout)` | Draw Molex dual USB A connector suitable for perf board |
 | `pcb(type)` | Draw specified PCB |
@@ -2434,6 +2500,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `pcb_components(type, cutouts = false, angle = undef)` | Draw list of PCB components on the PCB |
 | `pcb_cutouts(type, angle = undef)` | Make cut outs to clear components on a PCB |
 | `pcb_grid(type, x, y, z = 0)` | Positions children at specified grid position |
+| `pcb_grid_components(type, components, cutouts = false, angle = undef)` | Draw list of components on the PCB grid for perf board |
 | `pcb_screw_positions(type)` | Positions children at the mounting hole positions |
 | `pcb_spacer(screw, height, wall = 1.8, taper = 0)` | Generate STL for PCB spacer |
 | `rj45(cutout = false)` | Draw RJ45 Ethernet connector |
@@ -2446,6 +2513,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `usb_B(cutout = false)` | Draw USB B connector |
 | `usb_C(cutout = false)` | Draw USB C connector |
 | `usb_uA(cutout = false)` | Draw USB micro A connector |
+| `vero_pin(cropped = false)` | Draw a vero pin |

 ![pcbs](tests/png/pcbs.png)

@@ -2453,18 +2521,21 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | `pcb(ArduinoLeonardo)` |  Arduino Leonardo |
+|   1 | `pcb(ArduinoNano)` |  Arduino Nano |
 |   1 | `pcb(ArduinoUno3)` |  Arduino Uno R3 |
 |   1 | `pcb(BTT_SKR_E3_TURBO)` |  BigTreeTech SKR E3 Turbo |
 |   1 | `pcb(BTT_SKR_MINI_E3_V2_0)` |  BigTreeTech SKR Mini E3 v2.0 |
 |   1 | `pcb(BTT_SKR_V1_4_TURBO)` |  BigTreeTech SKR v1.4 Turbo |
 |   1 |  |  Cat 5 patch cable 300mm |
-|   1 | `d_plug(DCONN15, pcb = true)` |  D-type 15 way PCB mount plug |
+|   1 | `d_plug(DCONN15, pcb = true)` |  D-type 15 way PCB mount plug - not shown |
 |   1 | `pcb(DuetE)` |  Duet 2 Ethernet electronics |
 |   1 | `pcb(Duex2)` |  Duex2 expansion board - not shown |
 |   1 | `pcb(Duex5)` |  Duex5 expansion board |
 |   1 | `pcb(ESP-01)` |  ESP-01 |
+|   1 | `pcb(ESP32_DOIT_V1)` |  ESP32 DOIT DEV KIT V1 |
 |   1 | `pcb(EnviroPlus)` |  Enviro+ |
-|   1 | `pcb(ExtruderPCB)` |  Extruder connection PCB |
+|   1 | `pcb(ExtruderPCB)` |  Extruder connection PCB - not shown |
+|   1 | `pcb(KY_040)` |  KY_-040 rotart encoder breakout |
 |   1 | `pcb(Keyes5p1)` |  Keyes5.1 Arduino Uno expansion board - not shown |
 |   1 | `pcb(LIPO_fuel_gauge)` |  LIPO fuel gauge |
 |   1 | `pcb(MP1584EN)` |  MP1584EN 3A buck converter |
@@ -2472,13 +2543,13 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(Melzi)` |  Melzi electronics - not shown |
 |   4 |  |  Micro SD card |
 |   1 |  |  Micro SD card - not shown |
-|   1 | `molex_254(2)` |  Molex KK header 2 way |
-|   1 | `molex_254(3)` |  Molex KK header 3 way |
+|   1 | `molex_254(2)` |  Molex KK header 2 way - not shown |
+|   1 | `molex_254(3)` |  Molex KK header 3 way - not shown |
 |  20 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
 |  30 | `nut(M2p5_nut, nyloc = true)` |  Nut M2.5 x 2.2mm nyloc |
-|  26 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
+|  28 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   8 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
-|   1 | `pcb(PI_IO)` |  PI_IO V2 |
+|   1 | `pcb(PI_IO)` |  PI_IO V2 - not shown |
 |   1 | `pcb(PSU12V1A)` |  PSU 12V 1A - not shown |
 |   1 | `pcb(PERF60x40)` |  Perfboard 60 x 40mm |
 |   1 | `pcb(PERF70x30)` |  Perfboard 70 x 30mm |
@@ -2486,7 +2557,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(PERF70x51)` |  Perfboard 70 x 51mm |
 |   1 | `pcb(PERF74x51)` |  Perfboard 74 x 51mm |
 |   1 | `pcb(PERF80x20)` |  Perfboard 80 x 20mm |
-|   1 | `pin_socket(2p54header, 13, 2, right_angle = true)` |  Pin socket 13 x 2 right_angle |
+|   1 | `pin_socket(2p54header, 13, 2, right_angle = true)` |  Pin socket 13 x 2 right_angle - not shown |
 |   1 | `pcb(RAMPSEndstop)` |  RAMPS Endstop Switch |
 |   1 | `pcb(RPI3)` |  Raspberry Pi 3 |
 |   1 | `pcb(RPI4)` |  Raspberry Pi 4 |
@@ -2495,24 +2566,23 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   8 | `screw(M2_cap_screw, 16)` |  Screw M2 cap x 16mm |
 |  12 | `screw(M2_cap_screw, 20)` |  Screw M2 cap x 20mm |
 |   2 | `screw(M2p5_cap_screw, 16)` |  Screw M2.5 cap x 16mm |
-|   4 | `screw(M2p5_cap_screw, 20)` |  Screw M2.5 cap x 20mm |
 |   8 | `screw(M2p5_cap_screw, 25)` |  Screw M2.5 cap x 25mm |
-|   4 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
+|   8 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
 |   4 | `screw(M2p5_pan_screw, 20)` |  Screw M2.5 pan x 20mm |
 |   8 | `screw(M2p5_pan_screw, 25)` |  Screw M2.5 pan x 25mm |
-|   8 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
-|   4 | `screw(M3_cap_screw, 25)` |  Screw M3 cap x 25mm |
+|  10 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
 |  14 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
+|   4 | `screw(M3_cap_screw, 35)` |  Screw M3 cap x 35mm |
 |   8 | `screw(M4_cap_screw, 35)` |  Screw M4 cap x 35mm |
 |   1 | `pcb(XIAO)` |  Seeeduino XIAO |
 |   1 | `pcb(TP4056)` |  TP4056 Li-lon Battery charger module |
-|   3 | `terminal_35(2)` |  Terminal block 2 way 3.5mm |
-|   2 | `green_terminal(gt_2p54, 4)` |  Terminal block 4 way 0.1" |
+|   3 | `terminal_35(2)` |  Terminal block 2 way 3.5mm - not shown |
+|   2 | `green_terminal(gt_2p54, 4)` |  Terminal block 4 way 0.1" - not shown |
 |   1 |  |  USB A to Mini B lead - not shown |
 |   1 | `pcb(WD2002SJ)` |  WD2002SJ Buck Boost DC-DC converter |
 |  20 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
 |  30 | `washer(M2p5_washer)` |  Washer  M2.5 x 5.9mm x 0.5mm |
-|  26 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+|  28 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   8 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 |   1 | `pcb(ZC_A0591)` |  ZC-A0591 ULN2003 driver PCB |

@@ -2523,22 +2593,22 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   4 | pcb_spacer2070.stl |
 |   4 | pcb_spacer2080.stl |
 |   4 | pcb_spacer2090.stl |
-|   4 | pcb_spacer25110.stl |
 |   4 | pcb_spacer25120.stl |
-|   4 | pcb_spacer25130_2.stl |
+|   4 | pcb_spacer25130.stl |
 |   4 | pcb_spacer25140_2.stl |
-|   4 | pcb_spacer25160.stl |
+|   4 | pcb_spacer25150_2.stl |
 |   4 | pcb_spacer25170.stl |
+|   4 | pcb_spacer25180.stl |
 |   2 | pcb_spacer2550.stl |
-|   4 | pcb_spacer2590.stl |
-|   4 | pcb_spacer30150.stl |
-|   5 | pcb_spacer30180.stl |
+|   4 | pcb_spacer2580.stl |
+|   4 | pcb_spacer30160.stl |
 |   5 | pcb_spacer30190.stl |
-|   4 | pcb_spacer30200.stl |
+|   5 | pcb_spacer30200.stl |
+|   4 | pcb_spacer30210.stl |
 |   4 | pcb_spacer3050.stl |
-|   4 | pcb_spacer3060.stl |
-|   4 | pcb_spacer40210.stl |
+|   6 | pcb_spacer3060.stl |
 |   4 | pcb_spacer40220.stl |
+|   4 | pcb_spacer40230.stl |


 <a href="#top">Top</a>
@@ -2674,7 +2744,7 @@ Pin headers and sockets, etc.
 |:--- |:--- |
 | `box_header(type, cols = 1, rows = 1, smt = false, cutout = false)` | Draw box header |
 | `idc_transition(type, cols = 5, skip = [], cutout = false)` | Draw IDC transition header |
-| `jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false)` | Draw JST XH connector |
+| `jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false, smt = false)` | Draw JST XH connector |
 | `pin(type, length = undef)` | Draw a header pin |
 | `pin_header(type, cols = 1, rows = 1, smt = false, right_angle = false, cutout = false, colour)` | Draw pin header |
 | `pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt = false, cutout = false, colour)` | Draw pin socket |
@@ -2699,6 +2769,50 @@ Pin headers and sockets, etc.
 |   1 | `pin_socket(2p54header, 8, 1)` |  Pin socket 8 x 1 |


+<a href="#top">Top</a>
+
+---
+<a name="Potentiometers"></a>
+## Potentiometers
+Potentiometers and rotary encoders
+
+[vitamins/potentiometers.scad](vitamins/potentiometers.scad) Object definitions.
+
+[vitamins/potentiometer.scad](vitamins/potentiometer.scad) Implementation.
+
+[tests/potentiometers.scad](tests/potentiometers.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `pot_body(type)` | Body diameter or width & depth, height and corner radius |
+| `pot_boss_d(type)` | Boss diameter |
+| `pot_boss_h(type)` | Boss height |
+| `pot_face(type)` | Faceplate rib width, plate depth and plate height |
+| `pot_gangs(type)` | Number of gangs for mult-gang pot |
+| `pot_neck(type)` | Diameter and length of the shaft neck |
+| `pot_shaft(type)` | Diameter, flat diameter, length and flat/slot length and colour. If flat diameter is less than the radius then it is a slot width |
+| `pot_spigot(type)` | Spigot width, length and height above the boss |
+| `pot_spigot_x(type)` | Spigot offset from the shaft centre |
+| `pot_thread_d(type)` | Nomininal thread diameter |
+| `pot_thread_h(type)` | Height of threaded part |
+| `pot_thread_p(type)` | Thread pritch |
+| `pot_wafer(type)` | Width, diameter and thickness of the track wafer plus true if curved |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `pot_size(type)` | Get pot body dimensions |
+| `pot_z(type)` | Ideal distance behind panel surface to get the nut on comfortably |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `potentiometer(type, thickness = 3, shaft_length = undef)` | Draw a potentiometer with nut spaced by specified thickness |
+
+![potentiometers](tests/png/potentiometers.png)
+
+
 <a href="#top">Top</a>

 ---
@@ -2908,12 +3022,16 @@ Linear rails with carriages.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
+|   1 | `rail(HGH15CA, 200)` |  Linear rail HGH15CA x 200mm |
+|   1 | `rail(HGH20CA, 200)` |  Linear rail HGH20CA x 200mm |
 |   1 | `rail(MGN12, 200)` |  Linear rail MGN12 x 200mm |
 |   1 | `rail(MGN15, 200)` |  Linear rail MGN15 x 200mm |
 |   1 | `rail(MGN5, 200)` |  Linear rail MGN5 x 200mm |
 |   1 | `rail(MGN7, 200)` |  Linear rail MGN7 x 200mm |
 |   1 | `rail(MGN9, 200)` |  Linear rail MGN9 x 200mm |
 |   1 | `rail(SSR15, 200)` |  Linear rail SSR15 x 200mm |
+|   1 | `carriage(HGH15CA_carriage)` |  Linear rail carriage HGH15CA |
+|   1 | `carriage(HGH20CA_carriage)` |  Linear rail carriage HGH20CA |
 |   1 | `carriage(MGN12C_carriage)` |  Linear rail carriage MGN12C |
 |   1 | `carriage(MGN12H_carriage)` |  Linear rail carriage MGN12H |
 |   1 | `carriage(MGN15C_carriage)` |  Linear rail carriage MGN15C |
@@ -2925,7 +3043,8 @@ Linear rails with carriages.
 |   1 | `carriage(SSR15_carriage)` |  Linear rail carriage SSR15 |
 |  26 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
 |  23 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
-|   4 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
+|   7 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
+|   3 | `nut(M5_nut, nyloc = true)` |  Nut M5 x 4mm nyloc |
 |  11 | `screw(M2_cap_screw, 10)` |  Screw M2 cap x 10mm |
 |  15 | `screw(M2_cs_cap_screw, 10)` |  Screw M2 cs cap x 10mm |
 |   8 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
@@ -2934,10 +3053,15 @@ Linear rails with carriages.
 |   2 | `screw(M3_cs_cap_screw, 12)` |  Screw M3 cs cap x 12mm |
 |   4 | `screw(M3_cs_cap_screw, 16)` |  Screw M3 cs cap x 16mm |
 |   2 | `screw(M4_cap_screw, 16)` |  Screw M4 cap x 16mm |
+|   2 | `screw(M4_cap_screw, 20)` |  Screw M4 cap x 20mm |
 |   2 | `screw(M4_cs_cap_screw, 20)` |  Screw M4 cs cap x 20mm |
+|   2 | `screw(M4_cs_cap_screw, 25)` |  Screw M4 cs cap x 25mm |
+|   2 | `screw(M5_cap_screw, 20)` |  Screw M5 cap x 20mm |
+|   2 | `screw(M5_cs_cap_screw, 25)` |  Screw M5 cs cap x 25mm |
 |  26 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
 |  23 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
-|   4 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
+|   7 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
+|   3 | `washer(M5_washer)` |  Washer  M5 x 10mm x 1mm |


 <a href="#top">Top</a>
@@ -3149,6 +3273,7 @@ For an explanation of `screw_polysink()` see <https://hydraraptor.blogspot.com/2
 |   1 | `screw(M2_cs_cap_screw, 10)` |  Screw M2 cs cap x 10mm |
 |   1 | `screw(M2_dome_screw, 10)` |  Screw M2 dome x 10mm |
 |   1 | `screw(M2p5_cap_screw, 10)` |  Screw M2.5 cap x 10mm |
+|   1 | `screw(M2p5_dome_screw, 10)` |  Screw M2.5 dome x 10mm |
 |   1 | `screw(M2p5_pan_screw, 10)` |  Screw M2.5 pan x 10mm |
 |   1 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   1 | `screw(M3_cs_cap_screw, 10)` |  Screw M3 cs cap x 10mm |
@@ -3160,19 +3285,22 @@ For an explanation of `screw_polysink()` see <https://hydraraptor.blogspot.com/2
 |   1 | `screw(M4_cap_screw, 25)` |  Screw M4 cap x 25mm |
 |   1 | `screw(M4_cs_cap_screw, 25)` |  Screw M4 cs cap x 25mm |
 |   1 | `screw(M4_dome_screw, 25)` |  Screw M4 dome x 25mm |
-|   1 | `screw(M4_grub_screw, 6)` |  Screw M4 grub x  6mm |
+|   1 | `screw(M4_grub_screw, 8)` |  Screw M4 grub x  8mm |
 |   1 | `screw(M4_hex_screw, 30)` |  Screw M4 hex x 30mm |
 |   1 | `screw(M4_pan_screw, 30)` |  Screw M4 pan x 30mm |
 |   1 | `screw(M5_cap_screw, 30)` |  Screw M5 cap x 30mm |
 |   1 | `screw(M5_cs_cap_screw, 30)` |  Screw M5 cs cap x 30mm |
 |   1 | `screw(M5_dome_screw, 30)` |  Screw M5 dome x 30mm |
+|   1 | `screw(M5_grub_screw, 10)` |  Screw M5 grub x 10mm |
 |   1 | `screw(M5_hex_screw, 30)` |  Screw M5 hex x 30mm |
 |   1 | `screw(M5_pan_screw, 30)` |  Screw M5 pan x 30mm |
 |   1 | `screw(M6_cap_screw, 30)` |  Screw M6 cap x 30mm |
 |   1 | `screw(M6_cs_cap_screw, 30)` |  Screw M6 cs cap x 30mm |
+|   1 | `screw(M6_grub_screw, 12)` |  Screw M6 grub x 12mm |
 |   1 | `screw(M6_hex_screw, 30)` |  Screw M6 hex x 30mm |
 |   1 | `screw(M6_pan_screw, 30)` |  Screw M6 pan x 30mm |
 |   1 | `screw(M8_cap_screw, 35)` |  Screw M8 cap x 35mm |
+|   1 | `screw(M8_cs_cap_screw, 35)` |  Screw M8 cs cap x 35mm |
 |   1 | `screw(M8_hex_screw, 30)` |  Screw M8 hex x 30mm |
 |   1 | `screw(No2_screw, 10)` |  Screw No2 pan wood x 10mm |
 |   1 | `screw(No4_screw, 10)` |  Screw No4 pan wood x 10mm |
@@ -3210,6 +3338,61 @@ Sealing strip from B&Q used to seal around the door of 3D printers.
 |   1 | `sealing_strip(100)` |  Sealing strip 10mm x 4mm x 100mm |


+<a href="#top">Top</a>
+
+---
+<a name="Servo_motors"></a>
+## Servo_motors
+BLDC servos for CNC machines
+
+[vitamins/servo_motors.scad](vitamins/servo_motors.scad) Object definitions.
+
+[vitamins/servo_motor.scad](vitamins/servo_motor.scad) Implementation.
+
+[tests/servo_motors.scad](tests/servo_motors.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `faceplate_boss_size(type)` | Centre boss outer d, inner d and height |
+| `faceplate_hole_dia(type)` | Screw hole size |
+| `faceplate_hole_pitch(type)` | Screw hole pitch |
+| `faceplate_thickness(type)` | Thickness of the faceplate |
+| `faceplate_width(type)` | Width of faceplate |
+| `servo_motor_cap(type)` | Diameter height and corner radius of encoder cover |
+| `servo_motor_faceplate(type)` | Face plate type |
+| `servo_motor_length(type)` | Total length from the faceplate |
+| `servo_motor_shaft(type)` | Shaft type |
+| `shaft_diameter(type)` | Shaft diameter |
+| `shaft_key_size(type)` | None |
+| `shaft_length(type)` | Shaft length |
+| `shaft_type(type)` | String to indicate the shaft type |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `servo_motor_width(type)` | Width of the motor body |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `faceplate_screw_positions(type)` | Position children at faceplate screw positions |
+| `motor_faceplate(type)` | Draw specified motor faceplate |
+| `motor_shaft(type)` | Draw the specified motor shaft |
+| `servo_motor(type)` | Draw the specified servo |
+| `servo_screw_positions(type)` | Position children at screw positions |
+
+![servo_motors](tests/png/servo_motors.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `servo_motor(Lichuan_M01330_80ST) ` |  Servo Lichuan LCMT07L02NB-80M01330B 80ST mount 80 x 123mm |
+|   1 | `servo_motor(Lichuan_M02430_80ST) ` |  Servo Lichuan LCMT07L02NB-80M02430B 80ST mount 80 x 150mm |
+|   1 | `servo_motor(Lichuan_M03530_80ST) ` |  Servo Lichuan LCMT07L02NB-80M03530B 80ST mount 80 x 178mm |
+|   1 | `servo_motor(Lichuan_M04030_80ST) ` |  Servo Lichuan LCMT07L02NB-80M04030B 80ST mount 80 x 190mm |
+
+
 <a href="#top">Top</a>

 ---
@@ -3300,6 +3483,9 @@ When woven sheets (e.g. carbon fibre) are rendered it is necessary to specify th
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | `sheet(FoilTape, 30, 30, 2)` |  Aluminium foil tape 30mm x 30mm x 0.05mm |
+|   1 | `sheet(AL1_6, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 1.6mm |
+|   1 | `sheet(AL2, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 2mm |
+|   1 | `sheet(AL3, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 3mm |
 |   1 | `sheet(AL6, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 6mm |
 |   1 | `sheet(AL8, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 8mm |
 |   1 | `sheet(Spring05, 30, 30, 2)` |  Bi-metal saw blade 30mm x 30mm x 0.5mm |
@@ -3311,6 +3497,7 @@ When woven sheets (e.g. carbon fibre) are rendered it is necessary to specify th
 |   1 | `sheet(MDF12, 30, 30, 2)` |  Sheet MDF 30mm x 30mm x 12mm |
 |   1 | `sheet(MDF19, 30, 30, 2)` |  Sheet MDF 30mm x 30mm x 19mm |
 |   1 | `sheet(MDF6, 30, 30, 2)` |  Sheet MDF 30mm x 30mm x 6mm |
+|   1 | `sheet(PMMA1p25, 30, 30, 2)` |  Sheet acrylic 30mm x 30mm x 1.25mm |
 |   1 | `sheet(PMMA10, 30, 30, 2)` |  Sheet acrylic 30mm x 30mm x 10mm |
 |   1 | `sheet(PMMA2, 30, 30, 2)` |  Sheet acrylic 30mm x 30mm x 2mm |
 |   1 | `sheet(PMMA3, 30, 30, 2)` |  Sheet acrylic 30mm x 30mm x 3mm |
@@ -3616,15 +3803,20 @@ NEMA stepper motor model.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| `NEMA_black_caps(type)` | End caps are black |
 | `NEMA_body_radius(type)` | Body radius |
 | `NEMA_boss_height(type)` | Boss height |
 | `NEMA_boss_radius(type)` | Boss around the spindle radius |
 | `NEMA_cap_heights(type)` | Height of the end cap at the corner and the side |
+| `NEMA_end_connector(type)` | If has a connector then plug goes in the end rather than the side |
 | `NEMA_hole_pitch(type)` | Screw hole pitch |
 | `NEMA_length(type)` | Body length |
 | `NEMA_radius(type)` | End cap radius |
+| `NEMA_shaft_bore(type)` | Hollow shaft in non-zero |
 | `NEMA_shaft_dia(type)` | Shaft diameter |
 | `NEMA_shaft_length(type)` | Shaft length above the face, if a list then a leadscrew: length, lead, starts |
+| `NEMA_shaft_length2(type)` | Rear shaft length if non-zero |
+| `NEMA_thread_d(type)` | Screw hole diameter |
 | `NEMA_width(type)` | Width of the square face |

 ### Functions
@@ -3655,6 +3847,8 @@ NEMA stepper motor model.
 |   1 | `NEMA(NEMA17M)` |  Stepper motor NEMA17 x 40mm |
 |   1 | `NEMA(NEMA17)` |  Stepper motor NEMA17 x 47mm |
 |   1 | `NEMA(NEMA23)` |  Stepper motor NEMA22 x 51.2mm |
+|   1 | `NEMA(NEMA8)` |  Stepper motor NEMA8 x 30mm |
+|   1 | `NEMA(NEMA8BH)` |  Stepper motor NEMA8 x 30mm |
 |  16 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |  20 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |

--- a/scripts/exports.py
+++ b/scripts/exports.py
@@ -139,6 +139,7 @@ def make_parts(target, part_type, parts = None):
                                            #
                                            part_maker_name = tmp_dir + '/' + part_type + ".scad"
                                            with open(part_maker_name, "w") as f:
+                                                f.write("include <NopSCADlib/global_defs.scad>\n")
                                                f.write("use <%s/%s>\n" % (reltmp(dir, target), filename))
                                                f.write("%s();\n" % module);
                                            t = time.time()
--- a/scripts/render.py
+++ b/scripts/render.py
@@ -94,11 +94,13 @@ def render(target, type):
            cam = "--camera=0,0,0,70,0,315,500" if type == 'stl' else "--camera=0,0,0,0,0,0,500"
            render = "--preview" if type == 'stl' or colour != pp1 else "--render"
            tmp_name = tmp_dir + '/' + part[:-4] + '.png'
-            openscad.run("-o", tmp_name, png_maker_name, colour_scheme, "--projection=p", "--imgsize=4096,4096", cam, render, "--autocenter", "--viewall");
+            dummy_deps_name = tmp_dir + '/tmp.deps' # work around for OpenSCAD issue #3879
+            openscad.run("-o", tmp_name, png_maker_name, colour_scheme, "--projection=p", "--imgsize=4096,4096", cam, render, "--autocenter", "--viewall", "-d", dummy_deps_name)
            do_cmd(("magick "+ tmp_name + " -trim -resize 280x280 -background %s -gravity Center -extent 280x280 -bordercolor %s -border 10 %s"
                    % (background, background, tmp_name)).split())
            update_image(tmp_name, png_name)
            os.remove(png_maker_name)
+            os.remove(dummy_deps_name)
    #
    # Remove tmp dir
    #
--- a/scripts/tests.py
+++ b/scripts/tests.py
@@ -72,6 +72,8 @@ def update_image(tmp_name, png_name):
    if pixels < 0 or pixels > threshold:
        shutil.copyfile(tmp_name, png_name)
        print(Fore.YELLOW + png_name + " updated" + Fore.WHITE, pixels if pixels > 0 else '')
+        if png_name.endswith('_tn.png'):
+            os.remove(diff_name)
    else:
        os.utime(png_name, None)
        os.remove(diff_name)
--- a/scripts/tmpdir.py
+++ b/scripts/tmpdir.py
@@ -25,6 +25,7 @@ import time
 def mktmpdir(top_dir):
    tmp_dir = top_dir + 'tmp'
    if not os.path.isdir(tmp_dir):
+        time.sleep(0.1)
        os.makedirs(tmp_dir)
    else:
        for file in os.listdir(tmp_dir):
--- a/scripts/views.py
+++ b/scripts/views.py
@@ -216,6 +216,7 @@ def views(target, do_assemblies = None):
                                                #
                                                png_maker_name = tmp_dir + '/png.scad'
                                                with open(png_maker_name, "w") as f:
+                                                    f.write("include <NopSCADlib/global_defs.scad>\n")
                                                    f.write("use <%s/%s>\n" % (reltmp(dir, target), filename))
                                                    f.write("%s();\n" % module);
                                                t = time.time()
--- a/tests/7_segments.scad
+++ b/tests/7_segments.scad
@@ -0,0 +1,29 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/7_segments.scad>
+
+module 7_segments()
+    layout([for(s = 7_segments) 7_segment_size(s).x * 2], 5) let(s = 7_segments[$i])
+        7_segment_digits(s, 2);
+
+if($preview)
+    7_segments();
--- a/tests/PCB.scad
+++ b/tests/PCB.scad
@@ -22,6 +22,8 @@ include <../vitamins/d_connectors.scad>
 include <../vitamins/leds.scad>
 include <../vitamins/axials.scad>
 include <../vitamins/smds.scad>
+include <../vitamins/7_segments.scad>
+include <../vitamins/potentiometers.scad>

 use <../vitamins/pcb.scad>

@@ -46,7 +48,7 @@ TMC2130 = ["TMC2130", "TMC2130",
    []
 ];

-test_pcb = ["TestPCB", "Test PCB",
+test_pcb = ["test_pcb", "Test PCB",
    100, 250, 1.6, // length, width, thickness
    3,      // Corner radius
    2.75,   // Mounting hole diameter
@@ -95,6 +97,8 @@ test_pcb = ["TestPCB", "Test PCB",
        [ 65,  12,   0, "ax_res", res1_8, 1000],
        [ 65,  17,   0, "ax_res", res1_4, 10000],
        [ 65,  22,   0, "ax_res", res1_2, 100000],
+        [ 55,  22,   0, "vero_pin"],
+        [ 55,  17,   0, "vero_pin", true],

        [ 80,   9,   0, "link", inch(0.2), inch(0.4)],
        [ 80,  12,   0, "ax_res", res1_8, 1000000, 1, inch(0.1)],
@@ -137,7 +141,8 @@ test_pcb = ["TestPCB", "Test PCB",
        [ 52, 194,   0, "2p54socket", 8, 1, false, 0, false, "red" ],
        [ 50, 220,   0, "standoff",  5, 4.5, 12.5, 2.54],
        [ 50, 240,   0, "potentiometer"],
-        [ 75, 240,   0, "potentiometer", 7, 8],
+        [ 75, 240,   0, "potentiometer", KY_040_encoder, 8],
+        [ 30,  85,   -90, "7seg", WT5011BSR, 2],
    ],
    // accessories
    []
--- a/tests/PCBs.scad
+++ b/tests/PCBs.scad
@@ -21,7 +21,7 @@ include <../vitamins/pcbs.scad>

 use <../utils/layout.scad>

-function spacing(p) = let(w = pcb_width(p)) w < 22 ? w + 3 : w + 10;
+function spacing(p) = let(w = pcb_width(p)) w < 22 ? w + 3 : w + 7;

 module pcbs() {
    layout([for(p = pcbs) spacing(p)], 0)
@@ -29,9 +29,9 @@ module pcbs() {
            rotate(90)
                pcb_assembly(pcbs[$i], 5 + $i, 3);

-    translate([0, 45])
+    translate([0, 65])
        layout([for(p = tiny_pcbs) pcb_length(p)], 3)
-            translate([0, pcb_width(tiny_pcbs[$i]) / 2])
+            translate([0, -pcb_width(tiny_pcbs[$i]) / 2])
                 pcb_assembly(tiny_pcbs[$i], 5 + $i, 3);

    translate([0, 120])
--- a/tests/SK_brackets.scad
+++ b/tests/SK_brackets.scad
@@ -22,18 +22,20 @@ include <../vitamins/extrusions.scad>

 use <../utils/layout.scad>

-module sk_brackets() {
+module sk_brackets(examples = false) {
    screws = [M4_dome_screw, M4_cap_screw, M5_cap_screw, M5_cap_screw];
    nuts = [M4_hammer_nut, M4_sliding_t_nut, M5_sliding_t_nut, undef];
    // channel depth = 6 for 2020 extrusion, 9 for 3030 extrusion
    depths = [6, 6, 9, 0];
    layout([for(s = sk_brackets) 1.5 * sk_size(s)[1]]) {
        sk_bracket_assembly(sk_brackets[$i], screw_type = screws[$i], nut_type = nuts[$i], max_screw_depth = depths[$i]);
-        translate([0, -sk_hole_offset(sk_brackets[$i]) - extrusion_width($i < 2 ? E2020 : E3030) / 2, 0])
-            rotate([0, 90, 0])
-                extrusion($i < 2 ? E2020 : E3030, 20, false);
+
+        if(examples)
+            translate([0, -sk_hole_offset(sk_brackets[$i]) - extrusion_width($i < 2 ? E2020 : E3030) / 2, 0])
+                rotate([0, 90, 0])
+                    extrusion($i < 2 ? E2020 : E3030, 20, false);
    }
 }

 if($preview)
-    sk_brackets();
+    sk_brackets(true);
--- a/tests/displays.scad
+++ b/tests/displays.scad
@@ -24,7 +24,10 @@ use <../vitamins/pcb.scad>

 module displays()
    layout([for(d = displays) pcb_length(display_pcb(d))], 10)
-        display(displays[$i]);
+        translate([0, pcb_width(displays[$i]) / 2])
+            vflip()
+                display(displays[$i]);

 if($preview)
-    displays();
+    let($show_threads = true)
+        displays();
--- a/tests/extrusion_brackets.scad
+++ b/tests/extrusion_brackets.scad
@@ -16,13 +16,51 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
-include <../utils/core/core.scad>
+include <../core.scad>

-include <../vitamins/extrusion_brackets.scad>
 include <../vitamins/extrusions.scad>
+include <../vitamins/extrusion_brackets.scad>
 include <../vitamins/washers.scad>
 include <../vitamins/nuts.scad>

+module inner_bracket_test(bracket, backwards = false)
+    rotate([90, 0, 180]) {
+        extrusion = extrusion_inner_corner_bracket_extrusion(bracket);
+        eWidth = extrusion_width(extrusion);
+        size = extrusion_inner_corner_bracket_size(bracket);
+        tnut = extrusion_inner_corner_bracket_tnut(bracket);
+
+        translate([backwards ? -eWidth : 0, 0])
+            extrusion_inner_corner_bracket(bracket, backwards = backwards);
+
+        translate([-eWidth / 2, 0])
+            rotate([-90, 0, 0])
+                extrusion(extrusion, size.x - nut_thickness(tnut) - extrusion_tab_thickness(extrusion), false, cornerHole = eWidth > 20);
+
+        translate([-eWidth, -eWidth / 2])
+            rotate([0, 90, 0])
+                extrusion(extrusion, eWidth + size.y - nut_thickness(tnut) - extrusion_tab_thickness(extrusion), false, cornerHole = eWidth > 20);
+    }
+
+
+module bracket_test(bracket)
+    rotate([90, 0, 180]) {
+        extrusion = extrusion_corner_bracket_extrusion(bracket);
+        eWidth = extrusion_width(extrusion);
+        size = extrusion_corner_bracket_size(bracket);
+
+        extrusion_corner_bracket_assembly(bracket);
+
+        translate([-eWidth / 2, 0])
+            rotate([-90, 0, 0])
+                extrusion(extrusion, size.y, false, cornerHole = eWidth > 20);
+
+        translate([-eWidth, -eWidth / 2])
+            rotate([0, 90, 0])
+                extrusion(extrusion, eWidth + size.x, false, cornerHole = eWidth > 20);
+    }
+
+
 module extrusion_brackets(examples = false) {
    extrusion_inner_corner_bracket(E20_inner_corner_bracket);

@@ -32,34 +70,30 @@ module extrusion_brackets(examples = false) {
    translate([60, 0])
        extrusion_corner_bracket_assembly(E20_corner_bracket);

-    eWidth = extrusion_width(E2020);
+    translate([110, 0])
+         extrusion_inner_corner_bracket(E40_inner_corner_bracket);
+
+    translate([140, 0])
+        extrusion_corner_bracket_assembly(E40_corner_bracket);

    if(examples) {
-        translate([20, 60, 10]) rotate([90, 0, 180]) {
-            extrusion_inner_corner_bracket(E20_inner_corner_bracket);
+        translate([20, 50, 10])
+            inner_bracket_test(E20_inner_corner_bracket, true);

-            translate([-eWidth / 2, 0, 0])
-                rotate([-90, 0, 0])
-                    extrusion(E2020, 20, false);
+        translate([20, 80, 10])
+            inner_bracket_test(E20_inner_corner_bracket);

-            translate([-eWidth, -eWidth / 2, 0])
-                rotate([0, 90, 0])
-                    extrusion(E2020, 40, false);
-        }
+        translate([20, 120, 10])
+            bracket_test(E20_corner_bracket);

-        translate([100, 60, 10]) rotate([90, 0, 180]) {
-            extrusion_corner_bracket_assembly(E20_corner_bracket);
+        translate([100, 70, 10])
+            inner_bracket_test(E40_inner_corner_bracket);

-            translate([-eWidth / 2, 0, 0])
-                rotate([-90, 0, 0])
-                    extrusion(E2020, 30, false);
-
-            translate([-eWidth, -eWidth / 2, 0])
-                rotate([0, 90, 0])
-                    extrusion(E2020, 50, false);
-        }
+        translate([100, 130, 10])
+            bracket_test(E40_corner_bracket);
    }
 }

 if($preview)
-    extrusion_brackets(true);
+    let($show_threads = true)
+        extrusion_brackets(true);
--- a/tests/extrusions.scad
+++ b/tests/extrusions.scad
@@ -21,9 +21,24 @@ use <../utils/layout.scad>

 include <../vitamins/extrusions.scad>

+gap = 10;
+
 module extrusions()
-    layout([for(e = extrusions) extrusion_width(e)], 10)
-        extrusion(extrusions[$i], 80, cornerHole = extrusion_width(extrusions[$i]) > 20);
+    layout([for(e = extrusions) is_list(e[0]) ? extrusion_width(e[0]) : extrusion_width(e)], gap)
+        let(e = extrusions[$i])
+            if(is_list(e[0])) {
+                list = e;
+                heights = [for(e = list) extrusion_height(e)];
+                l = len(heights) - 1;
+                offset = (heights * [for(i = [0 : l]) 1] + l * gap) / 2;
+                translate([0, -offset])
+                    rotate(90)
+                        layout(heights, gap)
+                            rotate(-90)
+                                extrusion(list[$i], 80, cornerHole = extrusion_width(list[$i]) > 20);
+            }
+            else
+                extrusion(e, 80, cornerHole = extrusion_width(e) > 20);

 if ($preview)
    extrusions();
--- a/tests/nuts.scad
+++ b/tests/nuts.scad
@@ -52,6 +52,12 @@ module nuts() {

            if(n == M5_nut)
                sliding_t_nut(M5_sliding_t_nut);
+
+            if(n == M6_nut)
+                sliding_t_nut(M6_sliding_t_nut);
+
+            if(n == M8_nut)
+                sliding_t_nut(M8_sliding_ball_t_nut);
        }

        translate([0, 80]) {
--- a/tests/pin_headers.scad
+++ b/tests/pin_headers.scad
@@ -64,8 +64,9 @@ module pin_headers() {
            pin_socket(pin_headers[$i], 3, 3, right_angle = true);
    }

-    for(i = [0, 1], p = [5, 2][i], j = [0 , 1]) {
-        h = [jst_ph_header, jst_xh_header][j];
+    headers = [jst_zh_header, jst_ph_header, jst_xh_header];
+    for(i = [0, 1], p = [5, 2][i], j = [0 : len(headers) - 1]) {
+        h = headers[j];
        translate([-20 * (i + 1), 0 + j * 40])
            jst_xh_header(h, p);

--- a/tests/png/7_segments.png
+++ b/tests/png/7_segments.png
--- a/tests/png/annotation.png
+++ b/tests/png/annotation.png
--- a/tests/png/belts.png
+++ b/tests/png/belts.png
--- a/tests/png/bezier.png
+++ b/tests/png/bezier.png
--- a/tests/png/core_xy.png
+++ b/tests/png/core_xy.png
--- a/tests/png/dip.png
+++ b/tests/png/dip.png
--- a/tests/png/displays.png
+++ b/tests/png/displays.png
--- a/tests/png/extrusion_brackets.png
+++ b/tests/png/extrusion_brackets.png
--- a/tests/png/extrusions.png
+++ b/tests/png/extrusions.png
--- a/tests/png/green_terminals.png
+++ b/tests/png/green_terminals.png
--- a/tests/png/hygrometer.png
+++ b/tests/png/hygrometer.png
--- a/tests/png/leadnuts.png
+++ b/tests/png/leadnuts.png
--- a/tests/png/led_meters.png
+++ b/tests/png/led_meters.png
--- a/tests/png/nuts.png
+++ b/tests/png/nuts.png
--- a/tests/png/pcb.png
+++ b/tests/png/pcb.png
--- a/tests/png/pcbs.png
+++ b/tests/png/pcbs.png
--- a/tests/png/pillow_blocks.png
+++ b/tests/png/pillow_blocks.png
--- a/tests/png/pin_headers.png
+++ b/tests/png/pin_headers.png
--- a/tests/png/potentiometers.png
+++ b/tests/png/potentiometers.png
--- a/tests/png/printed_pulleys.png
+++ b/tests/png/printed_pulleys.png
--- a/tests/png/rails.png
+++ b/tests/png/rails.png
--- a/tests/png/rounded_polygon.png
+++ b/tests/png/rounded_polygon.png
--- a/tests/png/screws.png
+++ b/tests/png/screws.png
--- a/tests/png/servo_motors.png
+++ b/tests/png/servo_motors.png
--- a/tests/png/sheets.png
+++ b/tests/png/sheets.png
--- a/tests/png/sk_brackets.png
+++ b/tests/png/sk_brackets.png
--- a/tests/png/smds.png
+++ b/tests/png/smds.png
--- a/tests/png/stepper_motors.png
+++ b/tests/png/stepper_motors.png
--- a/tests/potentiometers.scad
+++ b/tests/potentiometers.scad
@@ -0,0 +1,31 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+//! Potentiometers and rotary encoders
+include <../core.scad>
+include <../utils/layout.scad>
+include <../vitamins/potentiometers.scad>
+
+module potentiometers()
+    layout([for(p = potentiometers) pot_size(p).x])
+        hflip()
+            potentiometer(potentiometers[$i], shaft_length = 30);
+
+if($preview)
+    let($show_threads = true)
+        potentiometers();
--- a/tests/rails.scad
+++ b/tests/rails.scad
@@ -29,7 +29,7 @@ pos = 1; //[-1 : 0.1 : 1]
 function rail_carriages(rail) = [for(c = carriages) if(carriage_rail(c) == rail) c];

 module rails()
-    layout([for(r = rails) carriage_width(rail_carriages(r)[0])], 20)
+    layout([for(r = rails) carriage_width(rail_carriages(r)[0])], 10)
        rotate(-90) {
            rail = rails[$i];
            carriages = rail_carriages(rail);
--- a/tests/screws.scad
+++ b/tests/screws.scad
@@ -48,7 +48,7 @@ module screws() {
        for(x = [0 : len(screw_lists[y]) -1]) {
            screw = screw_lists[y][x];
            if(screw) {
-                 length = screw_head_type(screw) == hs_grub ? 6
+                 length = screw_head_type(screw) == hs_grub ? screw_radius(screw) * 4
                        : screw_radius(screw) <= 1.5 ? 10
                        : screw_max_thread(screw) ? screw_longer_than(screw_max_thread(screw) + 5)
                        : 30;
--- a/tests/servo_motors.scad
+++ b/tests/servo_motors.scad
@@ -0,0 +1,31 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/servo_motors.scad>
+
+module servo_motors()
+    layout([for(s = servo_motors) servo_motor_width(s)], 10) let(s = servo_motors[$i]) {
+        rotate(-90)             // Show the keyway
+            servo_motor(s);
+    }
+
+if($preview)
+    servo_motors();
--- a/tests/stepper_motors.scad
+++ b/tests/stepper_motors.scad
@@ -22,12 +22,12 @@ include <../vitamins/stepper_motors.scad>
 use <../utils/layout.scad>

 module stepper_motors()
-    layout([for(s = stepper_motors) NEMA_width(s)], 5, no_offset = true) let(m = stepper_motors[$i]) {
+    layout([for(s = stepper_motors) NEMA_width(s)], 5, no_offset = false) let(m = stepper_motors[$i]) {
        rotate(180)
-            NEMA(m, 0, m == NEMA17P || m == NEMA17M || m == NEMA17M8);
+            NEMA(m, 0, in([NEMA17P, NEMA17M, NEMA17M8, NEMA8, NEMA8BH], m));

        translate_z(4)
-            NEMA_screws(m, M3_pan_screw, n = $i, earth = $i > 4 ? undef : $i - 1);
+            NEMA_screws(m, M3_pan_screw, n = $i - 2, earth = $i > 6 ? undef : $i - 3);
    }

 if($preview)
--- a/utils/core/bom.scad
+++ b/utils/core/bom.scad
@@ -42,24 +42,24 @@
 //! * To get the parameter values make the GUI window square, pose the view with the mouse and then copy the viewport parameters from the Edit menu and paste them into the pose invocation.
 //! * Two `pose()` modules can be chained to allow different poses for exploded and assembled views.
 //
-function bom_mode(n = 1) = $_bom >= n && (is_undef($on_bom) || $on_bom);  //! Current BOM mode, 0 = none, 1 = printed and routed parts and assemblies, 2 includes vitamins as well
-function exploded() = is_undef($exploded_parent) ? $exploded : 0;   //! Returns the value of `$exploded` if it is defined, else `0`
+function bom_mode(n = 1) = (is_undef($bom) ? 0 : $bom) >= n && (is_undef($on_bom) || $on_bom);  //! Current BOM mode, 0 = none, 1 = printed and routed parts and assemblies, 2 includes vitamins as well
+function exploded() = is_undef($exploded_parent) ? is_undef($explode) ? 0 : $explode : 0;   //! Returns the value of `$exploded` if it is defined, else `0`
 function show_supports() = !$preview || exploded();                 //! True if printed support material should be shown

 module no_explode() let($exploded_parent = true) children();        //! Prevent children being exploded
 module explode(d, explode_children = false, offset = [0,0,0]) {     //! Explode children by specified Z distance or vector `d`, option to explode grand children
    v = is_list(d) ? d : [0, 0, d];
    o = is_list(offset) ? offset : [0, 0, offset];
-    if($exploded && is_undef($exploded_parent) && norm(v)) {
+    if(exploded() && norm(v)) {
        translate(o)                                                // Draw the line first in case the child is transparent
            color("yellow") hull() {
                sphere(0.2);

-                translate(v * $exploded)
+                translate(v * exploded())
                    sphere(0.2);
            }

-        translate(v * $exploded)
+        translate(v * exploded())
            let($exploded_parent = explode_children ? undef : true)
                children();
    }
--- a/utils/tube.scad
+++ b/utils/tube.scad
@@ -25,7 +25,9 @@ include <../utils/core/core.scad>
 module ring(or, ir) //! Create a ring with specified external and internal radii
        difference() {
            circle4n(or);
-            circle4n(ir);
+
+            if(ir > 0)
+                circle4n(ir);
        }

 module tube(or, ir, h, center = true) //! Create a tube with specified external and internal radii and height `h`
--- a/vitamins/7_segment.scad
+++ b/vitamins/7_segment.scad
@@ -0,0 +1,107 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! 7 Segment displays
+//
+include <../utils/core/core.scad>
+
+
+function 7_segment_size(type)       = type[1]; //! Size of the body
+function 7_segment_digit_size(type) = type[2]; //! Size of the actual digit and segemnt width and angle
+function 7_segment_pins(type)       = type[3]; //! [x, y] array of pins
+function 7_segment_pin_pitch(type)  = type[4]; //! x and y pin pitches and pin diameter
+
+module 7_segment_digit(type, colour = grey(95), pin_length = 6.4) { //! Draw the specified 7 segment digit
+    size = 7_segment_size(type);
+    digit = 7_segment_digit_size(type);
+    pins = 7_segment_pins(type);
+    pin_pitch = 7_segment_pin_pitch(type);
+
+    color(grey(95))
+        linear_extrude(size.z)
+            square([size.x - 0.1, size.y], center = true);
+
+    color(grey(15))
+        translate_z(size.z)
+            cube([size.x - 0.1, size.y, eps], center = true);
+
+    color(colour)
+         translate_z(size.z)
+            linear_extrude(2 * eps) {
+                t = digit[2];
+                a = digit[3];
+                sq = [digit.x - 2 * t, (digit.y - 3 * t) / 2];
+
+                multmatrix([                    // Skew
+                    [1, tan(a), 0, 0],
+                    [0, 1, 0, 0],
+                    [0, 0, 1, 0],
+                    [0, 0, 0, 1]
+                ])
+                difference() {
+                    square([digit.x, digit.y], center = true);
+
+                    for(y = [-1, 1], x = [-1, 1]) {
+                        translate([0, y * (t + sq.y) / 2])
+                            square(sq, center = true);
+
+
+                        translate([x * digit.x / 2, y * digit.y / 2])
+                            rotate(-45 * x * y) {
+                                square([10, t], center = true);
+
+                                square([t / 5, 10], center = true);
+                            }
+
+                        translate([x * (digit.x - t) / 2, 0])
+                            rotate(45) {
+                                square([t / 5, t * 2], center = true);
+
+                                square([t * 2, t / 5], center = true);
+
+                                translate([x * t / 2, -x * t / 2])
+                                    square([t, t], center = true);
+                            }
+                    }
+                }
+                r = 1.25 * t / 2;
+                translate([digit.x / 2 - r + digit.y / 2 * tan(a), -digit.y / 2 + r])
+                    circle(r);
+            }
+
+    color(silver)
+        translate_z(-pin_length)
+            linear_extrude(pin_length)
+                for(x = [0 : 1 : pins.x - 1], y = [0 : 1 : pins.y - 1])
+                    translate([(x - (pins.x - 1) / 2) * pin_pitch.x, (y - (pins.y - 1) / 2) * pin_pitch.y])
+                        circle(d = pin_pitch[2], $fn = 16);
+}
+
+module 7_segment_digits(type, n, colour = grey(70), pin_length = 6.4, cutout = false) { //! Draw n digits side by side
+    size = 7_segment_size(type);
+
+    if(cutout)
+        linear_extrude(100)
+            square([n * size.x, size.y], center = true);
+    else
+        for(i = [0 : 1 : n - 1])
+            translate([(i - (n - 1) / 2) * size.x, 0])
+                7_segment_digit(type, colour, pin_length);
+}
--- a/vitamins/7_segments.scad
+++ b/vitamins/7_segments.scad
@@ -0,0 +1,28 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! 7 Segment displays
+//
+
+WT5011BSR = ["WT5011BSR", [12.7, 19, 8.2], [7.2, 12.7, 1.2, 10], [5, 2], [inch(0.1), inch(0.6), 0.4]];
+
+7_segments = [ WT5011BSR ];
+
+use <7_segment.scad>
--- a/vitamins/axial.scad
+++ b/vitamins/axial.scad
@@ -57,7 +57,7 @@ function ax_res_colour(type)  = type[7]; //! Body colour
 module orientate_axial(length, height, pitch, wire_d) { // Orient horizontal or vertical and add the wires
    min_pitch = ceil((length + 1) / inch(0.1)) * inch(0.1);
    lead_pitch = pitch ? pitch : min_pitch;
-    if(lead_pitch >= min_pitch) {
+    if(lead_pitch > min_pitch - eps) {
        not_on_bom()
            wire_link(wire_d, lead_pitch, height);

--- a/vitamins/displays.scad
+++ b/vitamins/displays.scad
@@ -73,6 +73,19 @@ SSD1963_4p3 = ["SSD1963_4p3", "LCD display SSD1963 4.3\"", 105.5, 67.2, 3.4, SSD
        [[0, -34.5], [12, -31.5]],
        ];

+TFT128x160PCB = ["", "", 56, 35, 1.2, 1, 2.0, 0, "mediumblue", false, [[-2.5, -2.5], [-2.5, 2.5], [2.5, 2.5], [2.5, -2.5]],
+      [ [2, 17.5, 0, "molex_hdr", 8]
+      ],
+      []];
+
+TFT128x160 = ["TFT128x160", "LCD TFT ST7735 display 128x160", 46, 34, 2.1, TFT128x160PCB,
+          [0, 0, 0],                                // pcb offset
+          [[-37 / 2 - 2.5, -30 / 2], [37 / 2 - 2.5, 30 / 2, 0.3]],              // aperture
+          [],                                       // touch screen
+          0,                                        // thread length
+          [],                                       // clearance need for the ts ribbon
+        ];
+

 /* Dimensions taken from:
 https://github.com/bigtreetech/BIGTREETECH-TFT35-V3.0/blob/master/Hardware/TFT35%20V3.0-SIZE-TOP.pdf
@@ -124,6 +137,6 @@ BigTreeTech_TFT35v3_0 = ["BigTreeTech_TFT35v3_0", "BigTreeTech TFT35 v3.0",
 ];


-displays = [HDMI5, SSD1963_4p3, BigTreeTech_TFT35v3_0, LCD1602A, LCDS7282B];
+displays = [HDMI5, SSD1963_4p3, BigTreeTech_TFT35v3_0, LCD1602A, LCDS7282B, TFT128x160];

 use <display.scad>
--- a/vitamins/extrusion.scad
+++ b/vitamins/extrusion.scad
@@ -21,101 +21,116 @@
 //
 include <../utils/core/core.scad>

-function extrusion_width(type)          = type[1];   //! Width of extrusion
-function extrusion_height(type)         = type[2];   //! Height of extrusion
-function extrusion_center_hole(type)    = type[3];   //! Diameter of center hole
-function extrusion_corner_hole(type)    = type[4];   //! Diameter of corner hole
-function extrusion_center_square(type)  = type[5];   //! Size of center square
-function extrusion_channel_width(type)  = type[6];   //! Channel width
-function extrusion_channel_width_internal(type)  = type[7];   //! Internal channel width
-function extrusion_tab_thickness(type)  = type[8];   //! Tab thickness
-function extrusion_spar_thickness(type) = type[9];   //! Spar thickness
-function extrusion_fillet(type)         = type[10];  //! Radius of corner fillet
+function extrusion_width(type)                  = type[1];  //! Width of extrusion
+function extrusion_height(type)                 = type[2];  //! Height of extrusion
+function extrusion_center_hole_wd(type)         = type[3];  //! Diameter of center hole if -ve or square side if +ve
+function extrusion_corner_hole_wd(type)         = type[4];  //! Diameter of corner hole if -ve or square side if +ve
+function extrusion_center_square_wd(type)       = type[5];  //! Size of center square if +ve or tube diameter if -ve
+function extrusion_channel_width(type)          = type[6];  //! Channel width
+function extrusion_channel_width_internal(type) = type[7];  //! Internal channel width
+function extrusion_tab_thickness(type)          = type[8];  //! Tab thickness
+function extrusion_spar_thickness(type)         = type[9];  //! Spar thickness
+function extrusion_fillet(type)                 = type[10]; //! Radius of corner fillet
+function extrusion_channel_recess(type)         = type[11]; //! Channel recess width and depth or false in none
+
+function extrusion_center_hole(type)            = abs(extrusion_center_hole_wd(type));  //! Diameter of center hole or side if square
+function extrusion_corner_hole(type)            = abs(extrusion_corner_hole_wd(type));  //! Diameter of corner hole or side if square
+function extrusion_center_square(type)          = abs(extrusion_center_square_wd(type)); //! Size of center square or tube

 module extrusion_cross_section(type, cornerHole) {
+    width = extrusion_width(type);
+    height = extrusion_height(type);
+    centerSquare = extrusion_center_square(type);
+    tabThickness = extrusion_tab_thickness(type);
+    sparThickness = extrusion_spar_thickness(type);
+    channelWidth = extrusion_channel_width(type);
+    recess = extrusion_channel_recess(type);
+    cornerSquare = (width - extrusion_channel_width_internal(type)) / 2;
+
+    module squircle(d) // Draw a square if positive else a circle
+        if(d > 0)
+            square([d, d], center = true);
+        else
+            if(d < 0)
+                circle(d = -d);

    module extrusion_corner(type, cornerHole) {
-        width = extrusion_width(type);
-        tabThickness = extrusion_tab_thickness(type);
-        sparThickness = extrusion_spar_thickness(type);
-        centerSquare = extrusion_center_square(type);
-        channelWidth = extrusion_channel_width(type);
        fillet = extrusion_fillet(type);
-        cornerSize = (width-channelWidth)/2;
-        cornerSquare = (width-extrusion_channel_width_internal(type))/2;
-        cornerHoleDiameter = extrusion_corner_hole(type);
+        cornerSize = (width - channelWidth) / 2;
+        cornerHoleDiameter = abs(extrusion_corner_hole(type));

-        translate([-width/2,-width/2]) {
+        translate([-width / 2, -width / 2]) {
            difference() {
                union() {
-                    translate([fillet,0])
-                        square([cornerSize-fillet,tabThickness]);
-                    translate([0,fillet])
-                        square([tabThickness,cornerSize-fillet]);
-                    translate([fillet,fillet])
+                    translate([fillet, 0])
+                        square([cornerSize - fillet, tabThickness]);
+
+                    translate([0, fillet])
+                        square([tabThickness, cornerSize - fillet]);
+
+                    translate([fillet, fillet])
                        circle(fillet);
-                    translate([fillet,fillet])
-                        square([cornerSquare-fillet,cornerSquare-fillet]);
+
+                    translate([fillet, fillet])
+                        square([cornerSquare - fillet, cornerSquare - fillet]);
                }
-                if(cornerHole && cornerHoleDiameter > 0)
-                    translate([cornerSquare/2,cornerSquare/2])
-                        circle(d=cornerHoleDiameter);
-            }
+                if(cornerHole)
+                    translate([cornerSquare / 2, cornerSquare / 2])
+                        squircle(extrusion_corner_hole_wd(type));
+             }
        }
-        rotate(-135) translate([centerSquare/2,-sparThickness/2]) square([sqrt(2)*(width-centerSquare-cornerSquare)/2,sparThickness]);
    }

    module extrusion_center_section(type) {
-        width = extrusion_width(type);
-        tabThickness = extrusion_tab_thickness(type);
-        sparThickness = extrusion_spar_thickness(type);
-        centerSquare = extrusion_center_square(type);
-        channelWidth = extrusion_channel_width(type);
+        for(side = [-1, 1]) {
+            translate([side * (width / 2 - tabThickness / 2), 0])
+                square([tabThickness, width - channelWidth], center = true);

-        translate([0,width/2])
-            for(angle=[225,315])
-                rotate(angle)
-                    translate([centerSquare/2,-sparThickness/2])
-                        square([sqrt(2)*(width-centerSquare)/2,sparThickness]);
-        translate([0,-width/2])
-            for(angle=[45,135])
-                rotate(angle)
-                    translate([centerSquare/2,-sparThickness/2])
-                        square([sqrt(2)*(width-centerSquare)/2,sparThickness]);
-
-        centerHeight = width-channelWidth;
-        translate([-width/2,-centerHeight/2])
-            square([tabThickness,centerHeight]);
-        translate([width/2-tabThickness,-centerHeight/2])
-            square([tabThickness,centerHeight]);
+            l = cornerSquare + sparThickness * tan(22.5) - sparThickness / sqrt(2);
+            for(end = [-1, 1])
+                translate([side * (width / 2 - l / 2), end * (cornerSquare - sparThickness / 2)])
+                    square([l, sparThickness], center = true);
+        }
    }


-    centerSquare = extrusion_center_square(type);
+    count = height / width - 1;

-    width = extrusion_width(type);
-    height = extrusion_height(type);
-    count = (height-width)/width;
+    difference() {
+        union() {
+            for(i = [0 : count])
+                translate([0, i * width + (width - height) / 2]) {
+                    difference() {
+                        union() {
+                            squircle(extrusion_center_square_wd(type));

-    for(i=[0:count])
-        translate([0,i*width+(width-height)/2])
-            difference() {
-                square([centerSquare,centerSquare],center=true);
-                if(extrusion_center_hole(type)>0)
-                    circle(d=extrusion_center_hole(type));
-            }
-    translate([0,(width-height)/2])
-        for(angle=[0,90])
-            rotate(angle)
-                extrusion_corner(type, cornerHole);
-    translate([0,-(width-height)/2])
-        for(angle=[180,270])
-            rotate(angle)
-                extrusion_corner(type, cornerHole);
-    if(count>=1)
-        for(i=[1:count])
-            translate([0,i*width-height/2])
-                extrusion_center_section(type);
+                            for(j = [0 : 3])
+                                rotate(45 + 90 * j)
+                                    translate([centerSquare / 2 - sparThickness / 2, -sparThickness / 2])
+                                        square([width / sqrt(2) - cornerSquare * sqrt(2) - centerSquare / 2 + sparThickness *(1 + tan(22.5)), sparThickness]);
+                        }
+                        squircle(d = extrusion_center_hole_wd(type));
+                    }
+                }
+
+            for(side = [-1, 1])
+                translate([0, side * (width - height) / 2])
+                    for(angle = [0, 90])
+                        rotate(angle + (side < 0 ? 180 : 0))
+                            extrusion_corner(type, cornerHole);
+
+            if(count >= 1)
+                for(i = [1 : count])
+                    translate([0, i * width - height / 2])
+                        extrusion_center_section(type);
+        }
+        if(recess)
+            for(i = [0 : count], j = [0 : 3])
+                translate([0, i * width + (width - height) / 2])
+                    rotate(j * 90)
+                        translate([width / 2, 0])
+                            square([recess.y * 2, recess.x], center = true);
+    }
 }

 module extrusion(type, length, center = true, cornerHole = false) { //! Draw the specified extrusion
--- a/vitamins/extrusion_bracket.scad
+++ b/vitamins/extrusion_bracket.scad
@@ -20,44 +20,65 @@
 //! Brackets for joining extrusions at a corner.

 include <../core.scad>
+use <extrusion.scad>

-function extrusion_inner_corner_bracket_size(type)             = type[1]; //! Size of inner bracket
+function extrusion_inner_corner_bracket_size(type)           = type[1]; //! Size of inner bracket
+function extrusion_inner_corner_bracket_tnut(type)           = type[2]; //! The sliding t-nut it is based on
+function extrusion_inner_corner_bracket_extrusion(type)      = type[3]; //! Default extrusion this bracket is for
+function extrusion_inner_corner_bracket_screw_offsets(type)  = type[4]; //! Screw offsets from the ends

-module extrusion_inner_corner_bracket(type, grub_screws = true) { //! Inner corner bracket for extrusion
-    vitamin(str("extrusion_inner_corner_bracket(", type[0], ", ", grub_screws, "): Extrusion inner corner bracket ", type[1].z));
+module extrusion_inner_corner_bracket(type, grub_screws = true, backwards = false, extrusion = undef) { //! Inner corner bracket for extrusion
+    extrusion = is_undef(extrusion) ? extrusion_inner_corner_bracket_extrusion(type) : extrusion;
+    vitamin(str("extrusion_inner_corner_bracket(", type[0], "): Extrusion inner corner bracket for ", extrusion[0]));

    size = extrusion_inner_corner_bracket_size(type);
-    armLength = size.x;
+    tnut = extrusion_inner_corner_bracket_tnut(type);
+    screw_offsets = extrusion_inner_corner_bracket_screw_offsets(type);
    bottomTabOffset = 4;
    topTabOffset = 10;
-    sizeBottom = [armLength - bottomTabOffset, 6, size.z];
-    sizeTop = [armLength - topTabOffset, 6, size.z];
-    tabSizeY1 = 10;
-    tabSizeY2 = 6;
-    tabSizeZ = 3.25;
-    holeRadius = M4_tap_radius;
+    sizeBottom = [size.y - bottomTabOffset, nut_square_width(tnut), size.z];
+    sizeTop    = [size.x - topTabOffset,    nut_square_width(tnut), size.z];
+    tab = t_nut_tab(tnut);
+    tabSizeZ = nut_thickness(tnut);
+    screw = find_screw(hs_grub, nut_size(tnut));
+    holeRadius = screw_pilot_hole(screw);
+    depth = (extrusion_width(extrusion) - extrusion_center_square(extrusion)) / 2;

-    translate([-size.z - 0.75, -size.z - 0.75, 0])
+    offset = extrusion_tab_thickness(extrusion) + tabSizeZ;
+    offset2 = extrusion_tab_thickness(extrusion) - nut_thickness(tnut, true) + nut_thickness(tnut);
+    translate([backwards ? offset2 : -offset,  -offset])
        rotate([-90, 0, 0]) {
            color("silver") {
-                translate([(armLength + bottomTabOffset) / 2, 0, tabSizeZ])
+                translate([(size.y + bottomTabOffset) / 2, 0, tabSizeZ])
                    rotate([0, 180, 0])
-                        extrusionSlidingNut(sizeBottom, tabSizeY1, tabSizeY2, tabSizeZ, holeRadius, (bottomTabOffset - armLength) / 2 + 5);
-                translate([tabSizeZ, 0, (armLength + topTabOffset) / 2])
+                        extrusionSlidingNut(sizeBottom, tab[0], tab[1], tabSizeZ, holeRadius, (bottomTabOffset - size.y) / 2 + screw_offsets.y);
+
+                translate([tabSizeZ, 0, (size.x + topTabOffset) / 2])
                    rotate([0, -90, 0])
-                        extrusionSlidingNut(sizeTop, tabSizeY1, tabSizeY2, tabSizeZ, holeRadius,-(topTabOffset - armLength) / 2 - 5);
-                translate([0, -size.z / 2, 0]) {
-                    cube([bottomTabOffset, size.z, size.z]);
-                    cube([size.z, size.z, topTabOffset]);
+                        extrusionSlidingNut(sizeTop, tab[0], tab[0], tabSizeZ, holeRadius, -(topTabOffset - size.x) / 2 - screw_offsets.x);
+
+                translate([0, -tab[1] / 2]) {
+                    cube([bottomTabOffset, tab[1], size.z]);
+                    cube([size.z, tab[1], topTabOffset]);
                }
            }
            if(grub_screws)
                not_on_bom() no_explode() {
-                    grubScrewLength = 6;
-                    for(angle = [[0, 0, 0], [0, -90, 180]])
-                        rotate(angle)
-                            translate([armLength - 5, 0, size.z])
-                                screw(M3_grub_screw, grubScrewLength);
+                    screw_len = screw_shorter_than(depth);
+                    gap = depth - screw_len;
+                    screw_z = offset - gap;
+
+                    rotate([0, -90, 180])
+                        if(backwards)
+                            translate([size.x - screw_offsets.x, 0, -offset2 + gap])
+                                vflip()
+                                    screw(screw, screw_len);
+                        else
+                            translate([size.x - screw_offsets.x, 0, screw_z])
+                                screw(screw, screw_len);
+
+                    translate([size.y - screw_offsets.y, 0, screw_z])
+                        screw(screw, screw_len);
                }
        }
 }
@@ -66,24 +87,29 @@ function extrusion_corner_bracket_size(type)             = type[1]; //! Size of
 function extrusion_corner_bracket_base_thickness(type)   = type[2]; //! Thickness of base of bracket
 function extrusion_corner_bracket_side_thickness(type)   = type[3]; //! Thickness of side of bracket
 function extrusion_corner_bracket_hole_offset(type)      = type[4]; //! Hole offset from corner
+function extrusion_corner_bracket_tnut(type)             = type[5]; //! The sliding t-nut to use in the assembly
+function extrusion_corner_bracket_extrusion(type)        = type[6]; //! Default extrusion this bracket is for

 module extrusion_corner_bracket(type) { //! Corner bracket for extrusion
-    vitamin(str("extrusion_corner_bracket(", type[0], "): Extrusion corner bracket ", type[1].z));
+    vitamin(str("extrusion_corner_bracket(", type[0], "): Extrusion corner bracket ", type[1].z, "mm for ", extrusion_corner_bracket_extrusion(type)[0]));

    eSize = extrusion_corner_bracket_size(type).z;
    cbSize = extrusion_corner_bracket_size(type).x;
    baseThickness = extrusion_corner_bracket_base_thickness(type);
+    hole_r = screw_clearance_radius(find_screw(hs_cap, nut_size(extrusion_corner_bracket_tnut(type))));

    module base() {
        linear_extrude(baseThickness)
            difference() {
-                translate([0, -eSize / 2, 0])
+                translate([0, -eSize / 2])
                    square([cbSize, eSize]);
+
                hull() {
-                    translate([extrusion_corner_bracket_hole_offset(type) + 1.5, 0, 0])
-                        circle(r = M5_clearance_radius);
-                    translate([extrusion_corner_bracket_hole_offset(type) - 1.5, 0, 0])
-                        circle(r = M5_clearance_radius);
+                    translate([extrusion_corner_bracket_hole_offset(type) + 1.5, 0])
+                        circle(hole_r);
+
+                    translate([extrusion_corner_bracket_hole_offset(type) - 1.5, 0])
+                        circle(hole_r);
                }
            }
    }
@@ -91,9 +117,11 @@ module extrusion_corner_bracket(type) { //! Corner bracket for extrusion
    color("silver") {
        rotate([90, 0, 90])
            base();
-        translate([0, baseThickness, 0])
+
+        translate([0, baseThickness])
            rotate([90, 0, 0])
                base();
+
        sideThickness = extrusion_corner_bracket_side_thickness(type);
        for(z = [-eSize / 2, eSize / 2 - sideThickness]) {
            translate_z(z) {
@@ -112,25 +140,31 @@ module extrusion_corner_bracket_hole_positions(type) { //! Place children at hol
                children();
 }

-module extrusion_corner_bracket_assembly(type, part_thickness = 2, screw_type = M4_cap_screw, nut_type = M4_sliding_t_nut, max_screw_depth = 6) { //! Assembly with fasteners in place
+module extrusion_corner_bracket_assembly(type, part_thickness = undef, screw_type = undef, nut_type = undef, max_screw_depth = undef, extrusion = undef) { //! Assembly with fasteners in place
    extrusion_corner_bracket(type);
+    extrusion = is_undef(extrusion) ? extrusion_corner_bracket_extrusion(type) : extrusion;

-    screw_washer_thickness = washer_thickness(screw_washer(screw_type));
-    nut_washer_type = nut_washer(nut_type);
+    nut = is_undef(nut_type) ? extrusion_corner_bracket_tnut(type) : nut_type;
+    screw = is_undef(screw_type) ? find_screw(hs_cap, nut_size(nut)) : screw_type;
+    thickness = is_undef(part_thickness) ? extrusion_tab_thickness(extrusion) : part_thickness;
+    depth = is_undef(max_screw_depth) ? (extrusion_width(extrusion) - extrusion_center_square(extrusion)) / 2 - eps : max_screw_depth;
+
+    screw_washer_thickness = washer_thickness(screw_washer(screw));
+    nut_washer_type = nut_washer(nut);
    nut_washer_thickness = nut_washer_type ? washer_thickness(nut_washer_type) : 0;

-    nut_offset = extrusion_corner_bracket_base_thickness(type) + part_thickness;
-    screw_length = max_screw_depth ? screw_shorter_than(extrusion_corner_bracket_base_thickness(type) + screw_washer_thickness + max_screw_depth)
-                                   : screw_longer_than(nut_offset + screw_washer_thickness + nut_washer_thickness + nut_thickness(nut_type));
+    nut_offset = extrusion_corner_bracket_base_thickness(type) + thickness;
+    screw_length = depth ? screw_shorter_than(extrusion_corner_bracket_base_thickness(type) + screw_washer_thickness + depth)
+                         : screw_longer_than(nut_offset + screw_washer_thickness + nut_washer_thickness + nut_thickness(nut));

    extrusion_corner_bracket_hole_positions(type) {
-        screw_and_washer(screw_type, screw_length);
+        screw_and_washer(screw, screw_length);
        translate_z(-nut_offset)
            vflip()
                if(nut_washer_type)
-                    nut_and_washer(nut_type);
+                    nut_and_washer(nut);
                else
                    rotate(90)
-                        sliding_t_nut(nut_type);
+                        sliding_t_nut(nut);
    }
 }
--- a/vitamins/extrusion_brackets.scad
+++ b/vitamins/extrusion_brackets.scad
@@ -20,10 +20,11 @@
 // Extrusion brackets
 //

-E20_inner_corner_bracket  = [ "E20_inner_corner_bracket", [25, 25, 4.5] ];
+E20_inner_corner_bracket  = [ "E20_inner_corner_bracket", [26, 25, 4.7], M4_sliding_t_nut, E2020t, [7,   6]];
+E40_inner_corner_bracket  = [ "E40_inner_corner_bracket", [38, 31, 8.5], M6_sliding_t_nut, E4040t, [13, 10]];

-E20_corner_bracket = [ "E20_corner_bracket", [28, 28, 20], 2, 3, 19.5];
+E20_corner_bracket = [ "E20_corner_bracket", [28, 28, 20], 2, 3, 19.5, M4_sliding_t_nut,      E2020t];
+E40_corner_bracket = [ "E40_corner_bracket", [40, 40, 35], 2, 3, 19.5, M8_sliding_ball_t_nut, E4040t];


 use <extrusion_bracket.scad>
-
--- a/vitamins/extrusions.scad
+++ b/vitamins/extrusions.scad
@@ -19,18 +19,19 @@
 //
 // Extrusion
 //
-//                   W   H    d1   d2   s  cw   cwi    t  st  f
-E1515  = [ "E1515", 15, 15,  2.5,   0,5.7,3.4,  5.7, 1.1,1.1, 0.5 ];
-E2020  = [ "E2020", 20, 20,  4.2,   3,  8,  6, 12.0,   2,  2, 1 ];
-E2040  = [ "E2040", 20, 40,  4.2,   3,  8,  6, 12.0,   2,  2, 1 ];
-E2060  = [ "E2060", 20, 60,  4.2,   3,  8,  6, 12.0,   2,  2, 1 ];
-E2080  = [ "E2080", 20, 80,  4.2,   3,  8,  6, 12.0,   2,  2, 1 ];
-E3030  = [ "E3030", 30, 30,  6.8, 4.2, 12,  8, 16.5,   2,  2, 1 ];
-E3060  = [ "E3060", 30, 60,  6.8, 4.2, 12,  8, 16.5,   2,  2, 1 ];
-E4040  = [ "E4040", 40, 40, 10.5, 6.0, 15, 10, 20.0, 5.5,  3, 1 ];
-E4080  = [ "E4080", 40, 80, 10.5, 6.0, 15, 10, 20.0, 5.5,  3, 1 ];
+//                  W   H     d1     d2  sq    cw   cwi   t    st   f    recess
+E1515  = [ "E1515", 15, 15,  -2.5,    0, 5.7,  3.4,  5.7, 1.1, 1.1, 0.5, false ];
+E2020  = [ "E2020", 20, 20,  -4.2,   -3,   8,    6, 12.0,   2,   2, 1,   false ];
+E2020t = [ "E2020t",20, 20,  -5.0,   -3, 7.8,  6.2, 11.0, 1.8, 1.5, 1.5, [7.2, 0.5] ];
+E2040  = [ "E2040", 20, 40,  -4.2,   -3,   8,    6, 12.0,   2,   2, 1,   false ];
+E2060  = [ "E2060", 20, 60,  -4.2,   -3,   8,    6, 12.0,   2,   2, 1,   false ];
+E2080  = [ "E2080", 20, 80,  -4.2,   -3,   8,    6, 12.0,   2,   2, 1,   false ];
+E3030  = [ "E3030", 30, 30,  -6.8, -4.2,  12,    8, 16.5,   2,   2, 1,   false ];
+E3060  = [ "E3060", 30, 60,  -6.8, -4.2,  12,    8, 16.5,   2,   2, 1,   false ];
+E4040  = [ "E4040", 40, 40, -10.5, -6.0,  15,   10, 20.0, 5.5,   3, 1,   false ];
+E4040t = [ "E4040t",40, 40, -10,    6.8, -16,   10, 20.0, 4.0, 2.4, 1.5, [12, 1] ];
+E4080  = [ "E4080", 40, 80, -10.5, -6.0,  15,   10, 20.0, 5.5,   3, 1,   false ];

-extrusions = [E1515,E2020,E2040,E2060,E2080,E3030,E3060,E4040,E4080];
+extrusions = [E1515, [E2020t, E2020], E2040, E2060, E2080, E3030, E3060, [E4040t, E4040], E4080];

 use <extrusion.scad>
-
--- a/vitamins/jack.scad
+++ b/vitamins/jack.scad
@@ -87,7 +87,8 @@ module jack_4mm(colour, thickness, display_colour = false) { //! Draw a 4mm jack
            }
 }

-function jack_4mm_shielded_hole_radius() = 12/2; //! Panel hole radius for 4mm shielded jack
+function jack_4mm_shielded_hole_radius() = 12 / 2; //! Panel hole radius for 4mm shielded jack
+function jack_4mm_shielded_nut_radius() = 14.4 / 2; //! Largest diameter of 4mm shielded jack

 module jack_4mm_shielded(colour, thickness, display_colour = false) { //! Draw a 4mm shielded jack
    vitamin(str("jack_4mm_shielded(\"", colour, "\", 3", arg(display_colour, false), "): 4mm shielded jack socket ", colour));
--- a/vitamins/leadnut.scad
+++ b/vitamins/leadnut.scad
@@ -36,12 +36,17 @@ function leadnut_hole_pitch(type)    = type[10];    //! The radial pitch of the
 function leadnut_screw(type)         = type[11];    //! The type of the fixing screws
 function leadnut_pitch(type)         = type[12];    //! Screw pitch
 function leadnut_lead(type)          = type[13];    //! Screw lead
+function leadnut_flat(type)          = type[14];    //! Flat section width
+function leadnut_colour(type)        = type[15];    //! The colour

 function leadnut_shank(type)         = leadnut_height(type) - leadnut_flange_t(type) - leadnut_flange_offset(type); //! The length of the shank below the flange

 module leadnut_screw_positions(type) { //! Position children at the screw holes
    holes = leadnut_holes(type);
-    for(i = [0 : holes - 1], a = i * 360 / holes + 180)
+    flat = leadnut_flat(type);
+    angles = flat ? [let(h = holes / 2, a = 90 / (h - 1)) for(i = [0 : h - 1], side = [-1, 1]) side * (45 + i * a)]
+                  : [for(i = [0 : holes - 1]) i * 360 / holes + 180];
+    for(a = angles)
        rotate(a)
            translate([leadnut_hole_pitch(type), 0, leadnut_flange_t(type)])
                rotate(45)
@@ -55,8 +60,10 @@ module leadnut(type) { //! Draw specified leadnut
    h = leadnut_height(type);
    pitch = leadnut_pitch(type);
    lead = leadnut_lead(type);
+    flat = leadnut_flat(type);
+    flange_d = leadnut_flange_dia(type);

-    color("dimgrey") vflip()
+    color(leadnut_colour(type)) vflip()
        translate_z(-leadnut_flange_offset(type) - leadnut_flange_t(type)) {
            tube(or = leadnut_od(type) / 2, ir = bore_r, h = h, center = false);

@@ -66,12 +73,17 @@ module leadnut(type) { //! Draw specified leadnut
            translate_z(leadnut_flange_offset(type))
                linear_extrude(leadnut_flange_t(type))
                    difference() {
-                        circle(d = leadnut_flange_dia(type));
+                        circle(d = flange_d);

                        circle(bore_r);

                        leadnut_screw_positions(type)
                            circle(d = leadnut_hole_dia(type));
+
+                        if(flat)
+                            for(side = [-1, 1])
+                                translate([side * flange_d / 2, 0])
+                                    square([flange_d - flat, flange_d], center = true);
                    }
        }
 }
--- a/vitamins/leadnuts.scad
+++ b/vitamins/leadnuts.scad
@@ -16,10 +16,18 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+//                                                    b   s     h   f     f    f    h  h    h        s             p   l  f  c
+//                                                    o   h     e   l     l    l    o  o    o        c             i   e  l  o
+//                                                    r   a     i   a     a    a    l  l    l        r             t   a  a  l
+//                                                    e   n     g   n     n    n    e  e    e        e             c   d  t  o
+//                                                        k     h   g     g    g    s                w             h         u
+//                                                              t   e     e    e       d    p                                r
+//
+//                                                                  d     t    o
+LSN8x2  = ["LSN8x2",  "Leadscrew nut 8 x 2",           8, 10.2, 15, 22,   3.5, 1.5, 4, 3.5, 8,       M3_cap_screw, 2,  2, 0, "dimgrey"];
+LSN8x8  = ["LSN8x8",  "Leadscrew nut 8 x 8 RobotDigg", 8, 12.75,19, 25.4, 4.1, 0,   3, 3.5, 19.05/2, M3_cap_screw, 2,  8, 0, "dimgrey"];
+SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610",    16, 28, 42.5, 48,    10, 0,   6, 6,   38/2,    M6_cap_screw, 5, 10, 40, "#DFDAC5"];

-LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2",          8, 10.2, 15, 22,   3.5, 1.5, 4, 3.5, 8,       M3_cap_screw, 2, 2];
-LSN8x8 = ["LSN8x8", "Leadscrew nut 8 x 8 RobotDigg",8, 12.75,19, 25.4, 4.1, 0,   3, 3.5, 19.05/2, M3_cap_screw, 2, 8];
-
-leadnuts = [LSN8x2, LSN8x8];
+leadnuts = [LSN8x2, LSN8x8, SFU1610];

 use <leadnut.scad>
--- a/vitamins/nut.scad
+++ b/vitamins/nut.scad
@@ -116,7 +116,7 @@ module wingnut(type) { //! Draw a wingnut
                polygon([
                    [hole_rad, 0],
                    [bottom_rad, 0],
-                    [top_rad,, thickness],
+                    [top_rad, thickness],
                    [hole_rad, thickness]
                ]);
            for(rot = [0, 180])
@@ -137,18 +137,61 @@ module wingnut(type) { //! Draw a wingnut
    }
 }

-module sliding_t_nut(type) {
-    hammerNut = type[10];
-    vitamin(str("sliding_t_nut(", type[0], "): Nut M", nut_size(type), hammerNut ? " hammer" : " sliding T"));
+function t_nut_tab(type) = [type[8], type[9]]; //! Sliding t-nut T dimensions

-    size = [type[7], type[2], nut_thickness(type, true)];
-    tabSizeY1 = type[8];
-    tabSizeY2 = type[9];
+module sliding_ball_t_nut(size, w, h, r) {
+    rad = 0.5;
+    stem = size.z - h;
+    ball_d = 4;
+    offset = 12;
+
+    module shape()
+        rotate([90, 0, 90])
+            translate_z(-offset)
+                linear_extrude(size.x) {
+                    hull() {
+                        translate([0, h - size.y / 2])
+                            semi_circle(d = size.y);
+
+                        for(side = [-1, 1])
+                            translate([side * (w / 2 - rad), rad])
+                                circle(rad);
+                    }
+                    rounded_square([size.y, stem * 2], rad / 2, true);
+                }
+
+    render() difference() {
+        shape();
+
+        cylinder(r = r, h = 100, center = true);
+    }
+
+    translate([-offset + ball_d, 0, h - 0.4])
+        sphere(d = ball_d);
+
+    if(show_threads)
+        render() intersection() {
+            translate_z(-stem)
+                female_metric_thread(2 * r, metric_coarse_pitch(2 * r), size.z - 2, center = false);
+
+            shape();
+        }
+}
+
+module sliding_t_nut(type) { //! Draw a sliding T nut, T nut with a spring loaded ball or a hammer nut.
+    hammerNut = type[10];
+    size = [type[7], nut_square_width(type), nut_thickness(type, true)];
+    tab = t_nut_tab(type);
    tabSizeZ = nut_thickness(type);
    holeRadius  = nut_size(type) / 2;

+    vitamin(str("sliding_t_nut(", type[0], "): Nut M", nut_size(type), hammerNut ? " hammer" : " sliding T", !tab[1] ? " with spring loaded ball" : ""));
+
    color(grey(80))
-        extrusionSlidingNut(size, tabSizeY1, tabSizeY2, tabSizeZ, holeRadius, 0, hammerNut);
+        if(!tab[1])
+            sliding_ball_t_nut(size, tab[0], tabSizeZ, holeRadius);
+        else
+            extrusionSlidingNut(size, tab[0], tab[1], tabSizeZ, holeRadius, 0, hammerNut);
 }

 module extrusionSlidingNut(size, tabSizeY1, tabSizeY2, tabSizeZ, holeRadius, holeOffset = 0, hammerNut = false) {
@@ -171,7 +214,7 @@ module extrusionSlidingNut(size, tabSizeY1, tabSizeY2, tabSizeZ, holeRadius, hol
            }
    linear_extrude(tabSizeZ)
        difference() {
-            square([size.x, tabSizeY2], center = true);
+            square([size.x, tabSizeY1 == tabSizeY2 ? size.y : tabSizeY2], center = true);
            if(holeRadius)
                translate([holeOffset, 0])
                    circle(holeRadius);
@@ -183,15 +226,28 @@ module extrusionSlidingNut(size, tabSizeY1, tabSizeY2, tabSizeZ, holeRadius, hol
            female_metric_thread(thread_d, metric_coarse_pitch(thread_d), size.z, center = false);

    // add the side tabs
+    tab_h = size.z - 2 * stem_h;
+    chamfer =tab_h / 4;
    for(m = [0, 1])
        mirror([0, m, 0])
-            translate([0, tabSizeY2 / 2]) {
-                cubeZ = 1;
-                translate([-size.x / 2, 0])
+            if(tabSizeY1 == tabSizeY2)
+                translate([-size.x / 2, size.y / 2])
+                    hull() {
+                        cube([size.x, (tabSizeY1 - size.y) / 2 - chamfer, tab_h]);
+
+                        translate_z(chamfer)
+                            cube([size.x, (tabSizeY1 - size.y) / 2,tab_h - 2 * chamfer]);
+                    }
+
+            else {
+                dy = (tabSizeY1 - tabSizeY2) / 2;
+                cubeZ = tabSizeZ - dy;
+                translate([-size.x / 2, tabSizeY2 / 2])
                    cube([size.x, (tabSizeY1 - tabSizeY2) / 2, cubeZ]);
-                translate_z(cubeZ)
+
+                translate([0, tabSizeY2 / 2, cubeZ])
                    rotate([0, -90, 0])
-                        right_triangle(tabSizeZ - cubeZ, (tabSizeY1 - tabSizeY2) / 2, size.x, center = true);
+                        right_triangle(tabSizeZ - cubeZ, dy, size.x, center = true);
            }
 }

--- a/vitamins/nuts.scad
+++ b/vitamins/nuts.scad
@@ -52,8 +52,12 @@ toggle_nut  =      ["toggle_nut",       6.1, 9.2, 1.5, 1.5,  M6_washer,     1.5,
 M4_wingnut  =      ["M4_wingnut",       4,  10,   3.75,8,    M4_washer,     0, 22, 10, 6, 3];
 //                                                                              sx  ty1 ty2 hammer
 M3_sliding_t_nut = ["M3_sliding_t_nut", 3,   6,   3.0, 4.0,  false,         0,  10,  10,  6, false];
-M4_sliding_t_nut = ["M4_sliding_t_nut", 4,   6,   3.25,4.5,  false,         0,  11,  10,  6, false];
-M5_sliding_t_nut = ["M5_sliding_t_nut", 5,   6,   3.25,4.5,  false,         0,  11,  10,  7, false];
+M4_sliding_t_nut = ["M4_sliding_t_nut", 4,   6,   3.7, 4.7,  false,         0,  11,  10,  6, false];
+M5_sliding_t_nut = ["M5_sliding_t_nut", 5,   6,   3.7, 4.7,  false,         0,  11,  10,  7, false];
+M6_sliding_t_nut = ["M6_sliding_t_nut", 6,   8,   6.6, 8.5,  false,         0,  16,  18.6,8,2, false];
+M8_sliding_ball_t_nut = ["M8_sliding_ball_t_nut",
+                                        8,   8,   6.7, 7.6,  false,         0,  22,  13.5,  0, false];
+
 M3_hammer_nut =    ["M3_hammer_nut",    3,   6,   2.75,4.0,  false,         0, 5.5,  10,  6, true];
 M4_hammer_nut =    ["M4_hammer_nut",    4,   6,   3.25,4.5,  false,         0, 5.5,  10,  6, true];

--- a/vitamins/pcb.scad
+++ b/vitamins/pcb.scad
@@ -27,6 +27,7 @@ include <buttons.scad>
 include <green_terminals.scad>
 include <pin_headers.scad>
 use <microswitch.scad>
+use <7_segment.scad>

 use <../utils/rounded_cylinder.scad>
 use <../utils/dogbones.scad>
@@ -37,6 +38,7 @@ use <led.scad>
 use <dip.scad>
 use <axial.scad>
 use <smd.scad>
+include <potentiometers.scad>

 function pcb_name(type)         = type[1];  //! Description
 function pcb_length(type)       = type[2];  //! Length
@@ -58,7 +60,6 @@ function pcb_size(type) = [pcb_length(type), pcb_width(type), pcb_thickness(type
 function pcb_component(type, name, index = 0) = //! Return the component specified by name and index
    [for(component = pcb_components(type)) if(component[3] == name) component][index];

-
 function pcb_grid_pos(type, x, y, z = 0) = //! Returns a pcb grid position
    let(grid = pcb_grid(type))
        [-pcb_size(type).x / 2 + grid.x + x * (is_undef(grid[5]) ? 2.54 : grid[5]),
@@ -88,10 +89,13 @@ module pcb_hole_positions(type, all = true) { // Position children at the hole p
 module pcb_screw_positions(type)  //! Positions children at the mounting hole positions
    pcb_hole_positions(type, false) children();

-module chip(length, width, thickness, colour, cutout = false) //! Draw a coloured cube to represent a chip, or other rectangular component
+module chip(length, width, thickness, colour, cutout = false) //! Draw a coloured cube to represent a chip, or other rectangular component, or cylinder if width is zero
    if(!cutout)
        color(colour)
-            translate_z(thickness / 2) cube([length, width, thickness], center = true);
+            if(width)
+                translate_z(thickness / 2) cube([length, width, thickness], center = true);
+            else
+                cylinder(d = length, h = thickness);

 module usb_A_tongue() {
    l = 9;
@@ -362,31 +366,11 @@ module jack(cutout = false) { //! Draw 3.5mm jack
 module buzzer(height, diameter, colour) { //! Draw PCB buzzer with specified height, diameter and colour
    color (colour)
        tube(or = diameter / 2, ir = height > 5 ? 1 : 0.75, h = height, center = false);
+
    color("white")
        cylinder(d = 2, h = max(height - 3 , 0.5));
 }

-module potentiometer(h1, h2) {
-    color("silver") {
-        baseSize = [12, 11, 6];
-        translate_z(baseSize.z / 2)
-            cube(baseSize, center = true);
-        translate_z(baseSize.z) {
-            cylinder(d = 5, h = h1 - 0.5);
-            if (show_threads)
-                male_metric_thread(6, metric_coarse_pitch(5), length = h1 - 0.5, center = false);
-        }
-        translate_z(baseSize.z + h1 - 0.5)
-            cylinder(d = 3, h = 0.5);
-        translate_z(baseSize.z + h1)
-            linear_extrude(h2)
-                difference() {
-                    circle(d=5);
-                    square([0.75,5], center = true);
-                }
-    }
-}
-
 function hdmi_depth(type)     = type[2]; //! Front to back depth
 function hdmi_width1(type)    = type[3]; //! Inside width at the top
 function hdmi_width2(type)    = type[4]; //! Inside width at the bottom
@@ -875,7 +859,7 @@ module terminal_35(ways, colour = "blue") { //! Draw 3.5mm terminal block
            single();
 }

-module molex_254(ways) { //! Draw molex header
+module molex_254(ways, right_angle = 0, skip = undef) { //! Draw molex header, set `right_angle` to 1 for normal right angle version or -1 for inverted right angle version.
    vitamin(str("molex_254(", ways, "): Molex KK header ", ways, " way"));
    pitch = 2.54;
    width = ways * pitch - 0.1;
@@ -885,20 +869,66 @@ module molex_254(ways) { //! Draw molex header
    back = 1;
    below = 2.3;
    above = 9;
+    pin_w = 0.64;
+    r = 1;
+    a = right_angle ? width / 2 - r - pin_w / 2 : above;
+    ra_offset = 2.72;
    color("white")
-        union() {
-            translate([ -depth / 2, -width / 2,])
-                cube([depth, width, base]);
+        translate(right_angle ? [-ra_offset, 0, depth / 2] : [ 0, 0, 0])
+            rotate(right_angle ? right_angle > 0 ? [180, 90, 0] : [0, -90, 0] : [ 0, 0, 0])
+                union() {
+                    translate([ -depth / 2, -width / 2,])
+                        cube([depth, width, base]);

-            w = width - pitch;
-            translate([- depth / 2, -w / 2])
-                cube([back, w, height]);
-         }
+                    w = width - pitch;
+                    translate([- depth / 2, -w / 2])
+                        cube([back, w, height]);
+                 }

    color("silver")
-        for(i = [0: ways -1])
-            translate([0, i * pitch - width / 2 + pitch / 2, (above + below) / 2 - below])
-                cube([0.44, 0.75, above + below], center = true);
+        for(i = [0 : ways -1])
+            if(is_undef(skip) || !in(skip, i))
+                translate([0, i * pitch - width / 2 + pitch / 2]) {
+                    translate_z((a + below) / 2 - below)
+                        cube([pin_w, pin_w, a + below], center = true);
+
+                    l = above + ra_offset - r - pin_w / 2;
+                    if(right_angle) {
+                        translate([-l / 2 - r - pin_w / 2, 0, width / 2])
+                            cube([l, pin_w, pin_w], center = true);
+
+                        translate([-r - pin_w / 2, 0, a])
+                            rotate([90, 0, 0])
+                                rotate_extrude(angle = 90)
+                                    translate([r + pin_w / 2, 0])
+                                        square(pin_w, true);
+                    }
+                }
+}
+
+module vero_pin(cropped = false) { //! Draw a vero pin
+    vitamin("vero_pin(): Vero board pin");
+    l = cropped ? 7.5 : 10;
+    d = 1.03;
+    spline_d = 1.23;
+    spline_h = 1.3;
+    collar_d = 1.72;
+    collar_h = 0.65;
+    above = 3.6;
+    splines = 6;
+    spline_w = 0.3;
+
+    color(silver) {
+        translate_z(-l + above + collar_h)
+            cylinder(d = d, h = l, $fn = 32);
+
+        cylinder(d = collar_d, h = collar_h);
+
+        for(i = [0 : splines - 1])
+            rotate(360 * i / splines)
+                translate([d / 2, 0, -spline_h])
+                    rounded_rectangle([spline_d - d, spline_w, spline_h], spline_w / 4, center = false);
+    }
 }

 module standoff(h, d, h2, d2) { //! Draw a standoff
@@ -1000,6 +1030,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
        if(show(comp, "molex_usb_Ax2")) molex_usb_Ax2(cutouts);
        if(show(comp, "molex_usb_Ax1")) molex_usb_Ax1(cutouts);
        if(show(comp, "smd_led"))       smd_led(comp[4], comp[5], cutouts);
+        if(show(comp, "7seg"))          let(z = param(6, 0)) translate_z(z) 7_segment_digits(comp[4], comp[5], pin_length = z + 3, cutout = cutouts);
        if(show(comp, "block"))         block(size = [comp[4], comp[5], comp[6]], colour = comp[7], makes_cutout = param(8));
        if(!cutouts) {
            // Components that don't have a cutout parameter go in this section
@@ -1020,13 +1051,14 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
            if(show(comp, "ax_res"))        ax_res(comp[4], comp[5], param(6, 5), param(7, 0));
            if(show(comp, "link"))          wire_link(l = comp[4], h = param(5, 1), d = param(6, 0.8), tail = param(7, 3));
            if(show(comp, "D_plug"))        translate_z(d_pcb_offset(comp[4])) d_plug(comp[4], pcb = true);
-            if(show(comp, "molex_hdr"))     molex_254(comp[4]);
+            if(show(comp, "molex_hdr"))     molex_254(comp[4], param(5, 0), param(6, undef));
            if(show(comp, "jst_xh"))        jst_xh_header(jst_xh_header, comp[4], param(5, false), param(6, "white"), param(7, undef));
            if(show(comp, "jst_ph"))        jst_xh_header(jst_ph_header, comp[4], param(5, false), param(6, "white"), param(7, undef));
-            if(show(comp, "potentiometer")) potentiometer(param(4, 5), param(5, 9));
+            if(show(comp, "potentiometer")) let(pot = param(4, BTT_encoder)) translate_z(pot_size(pot).z) vflip() potentiometer(pot, shaft_length = param(5, undef));
            if(show(comp, "buzzer"))        buzzer(param(4, 9), param(5, 12), param(6, grey(20)));
            if(show(comp, "smd_res"))       smd_resistor(comp[4], comp[5]);
            if(show(comp, "smd_cap"))       smd_capacitor(comp[4], comp[5]);
+            if(show(comp, "vero_pin"))      vero_pin(param(4, false));
        }
    }
 }
@@ -1064,6 +1096,19 @@ module pcb_components(type, cutouts = false, angle = undef) { //! Draw list of P
        }
 }

+module pcb_grid_components(type, components, cutouts = false, angle = undef) //! Draw list of components on the PCB grid for perf board
+    for(comp = components) {
+        p = pcb_grid_pos(type, comp.x, comp.y);
+        if(comp[3][0] == "-")
+            translate([p.x, p.y])
+                vflip()
+                    pcb_component(comp, cutouts, angle);
+        else
+            translate([p.x, p.y, pcb_thickness(type)])
+                pcb_component(comp, cutouts, angle);
+    }
+
+
 module pcb_cutouts(type, angle = undef) pcb_components(type, true, angle); //! Make cut outs to clear components on a PCB

 module pcb_grid_positions(type) {
@@ -1149,7 +1194,7 @@ module pcb(type) { //! Draw specified PCB

                            circle(d = 1);
                        }
-                    if(fr4 && len(grid) < 3) { // oval lands at the ends
+                    if(fr4 && len(grid) < 3 && pcb_holes(type)) { // oval lands at the ends
                        screw_x = pcb_coord(type, pcb_holes(type)[0]).x;
                        y0 = pcb_grid(type).y;
                        rows = round((pcb_width(type) - 2 * y0) / inch(0.1));
--- a/vitamins/pcbs.scad
+++ b/vitamins/pcbs.scad
@@ -22,6 +22,8 @@ include <leds.scad>
 include <axials.scad>
 include <smds.scad>
 include <green_terminals.scad>
+include <7_segments.scad>
+include <potentiometers.scad>

 //
 //                                   l      w      t    r     h     l  c        b     h
@@ -818,11 +820,71 @@ LIPO_fuel_gauge = [
    [] // accessories
 ];

+ESP32_DOIT_V1 = let(l = 51.45, w = 28.33, pitch = inch(1), pins = 15, poffset = inch(0.05)) [
+    "ESP32_DOIT_V1", "ESP32 DOIT DEV KIT V1",
+    l, w, 1.6, // Size
+    2, // corner radius
+    3, // mounting hole diameter
+    0, // pad around mounting hole
+    grey(20), // color
+    false, // true if parts should be separate BOM items
+    [for(x = [-1, 1], y = [-1, 1]) [x * 46.7 / 2 + l / 2, y * 23.4 / 2 + w / 2, false]],
+    [ // components
+      [l / 2 + poffset, w / 2 - pitch / 2, 0, "-2p54joiner", pins, 1],
+      [l / 2 + poffset, w / 2 + pitch / 2, 0, "-2p54joiner", pins, 1],
+      [1.75, w / 2, 180, "usb_uA" ],
+      [35,  w / 2, 0, "block", 17.7, 16, 3, silver], // can
+      for(y=[-1,1]) [3.5,  y * 6.5, 0, "chip", 4,  3, 1.6, silver],   // Mock button surround
+      for(y=[-1,1]) [3.5,  y * 6.5, 0, "chip", 1.8,0, 2.0, grey(20)], // Mock buttons
+      for(y=[-1,1]) [21.6, y * 9,   0, "smd_led", LED0603, y < 0 ? "red" : "blue"],
+      [14.8 - 2.5, 8, 0, "chip", 5, 5, 0.8],
+      [l / 2 + poffset + inch(0.7), w / 2 + pitch / 2 - 2, 90, "smd_cap", CAP1206, 1.75],
+   ],
+    [], // accessories
+    [(l - inch(pins - 1) / 10) / 2 + inch(0.05), (w - pitch) / 2, pins, 2, silver, 2.54, pitch], // 15x2 grid of holes
+];
+
+ArduinoNano = let(l = 43.18, w = 17.78, pitch = inch(0.6), pins = 15, poffset = -0.05, led_spacing = [1.5, 1.8]) [
+    "ArduinoNano", "Arduino Nano",
+    l, w, 1.6, // Size
+    0, // corner radius
+    1.85, // mounting hole diameter
+    0, // pad around mounting hole
+    "#2140BE", // color
+    false, // true if parts should be separate BOM items
+    [for(x = [-1, 1], y = [-1, 1]) [x * 40.64 / 2 + l / 2, y * 15.24 / 2 + w / 2]],
+    [ // components
+      [l / 2 + poffset, w / 2 - pitch / 2,  0, "-2p54joiner", pins, 1],
+      [l / 2 + poffset, w / 2 + pitch / 2,  0, "-2p54joiner", pins, 1],
+      [l / 2 + poffset + inch(0.75), w / 2, 0, "2p54header",  2,    3],
+      [1.75, w / 2, 180, "usb_uA" ],
+      [l / 2 - inch(0.25), w / 2, 45, "chip", 7, 7, 1.3],
+      [l / 2 + poffset + inch(0.15), w / 2,    0, "chip", 3.5, 6,   1.8, silver ], // mock button
+      [l / 2 + poffset + inch(0.15), w / 2,    0, "chip", 1.3, 2.6, 2.6, grey(90) ], // mock button
+      for(y = [-1.5 : 1.5]) [l / 2 + poffset + inch(0.4) - led_spacing.x, w / 2 + y * led_spacing.y, 0, "smd_res", RES0603, "1K"],
+      for(y = [-1.5 : 1.5]) [l / 2 + poffset + inch(0.4) + led_spacing.x, w / 2 + y * led_spacing.y, 0, "smd_led", LED0603, ["green", "red", "orange", "orange"][y + 1.5]],
+    ],
+    [], // accessories
+    [(l - inch(pins - 1) / 10) / 2 + poffset, (w - pitch) / 2, pins, 2, silver, 2.54, pitch], // 15x2 grid of holes
+];
+
+KY_040 = ["KY_040", "KY_-040 rotart encoder breakout",
+    26.3, 19.5, 1.6, 0, 3, 0, grey(20),  false,
+    [
+     [3.23 + 1.5, 1.3 + 1.5],
+     [3.23 + 1.5 + 16.775, 1.3 + 1.5]
+    ],
+    [
+       [-3, 12, 90, "2p54header", 5, 1, undef, undef, true],
+       [10.8, 11.3, 0, "potentiometer", KY_040_encoder],
+    ],
+    []];
+
 tiny_pcbs = [XIAO, MP1584EN, TP4056, ESP_01, LIPO_fuel_gauge];

-pcbs = [RAMPSEndstop, MT3608, PI_IO, ExtruderPCB, ZC_A0591, RPI_Pico, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
+pcbs = [RAMPSEndstop, KY_040, MT3608, ZC_A0591, ArduinoNano, RPI_Pico, ESP32_DOIT_V1, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];

-pcbs_not_shown = [Melzi, Duex2, PSU12V1A, Keyes5p1];
+pcbs_not_shown = [Melzi, Duex2, PSU12V1A, Keyes5p1, PI_IO, ExtruderPCB];

 perfboards = [PERF74x51, PERF70x51, PERF70x50, PERF60x40, PERF70x30, PERF80x20];

--- a/vitamins/pin_header.scad
+++ b/vitamins/pin_header.scad
@@ -229,7 +229,7 @@ module pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt
    }
 }

-module jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false) { //! Draw JST XH connector
+module jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false, smt = false) { //! Draw JST XH connector
    colour = colour ? colour : hdr_base_colour(type);
    pin_colour = pin_colour ? pin_colour : hdr_pin_colour(type);
    pitch = hdr_pitch(type);
@@ -306,10 +306,12 @@ module jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_c

    color(pin_colour)
        for(x = [0 : pin_count - 1]) {
+            below = !smt ? 0 : hdr_pin_below(type);
            verticalPinLength = right_angle ? hdr_pin_below(type) + ra_z + y_offset : hdr_pin_length(type);
            horizontalPinLength = hdr_pin_length(type) - hdr_pin_below(type) + ra_box_offset;
            translate([pitch * (x - (pin_count - 1) / 2), 0]) {
-                pin(type, verticalPinLength);
+                translate_z(below)
+                    pin(type, verticalPinLength - below);

                if(right_angle) {
                    translate([0, -pinWidth / 2, ra_z - pinWidth / 2 + y_offset])
--- a/vitamins/pin_headers.scad
+++ b/vitamins/pin_headers.scad
@@ -29,6 +29,7 @@

 jst_xh_header = ["jst_xh_header",2.5,  10, 3.4, 0.64, gold,   grey(90), 0,   [4.9, 5.75, 7],   0.8, 0.525, 0.6,  6.1];
 jst_ph_header = ["jst_ph_header",2.0,   9, 3.4, 0.64, silver, grey(90), 0,   [3.9, 4.5,  6],   0.6, 0.55,  0.25, 4.8];
+jst_zh_header = ["jst_zh_header",1.5, 7.4, 3.4, 0.5 , silver, grey(90), 0,   [3.0, 3.5,4.5],   0.5, 0.45,  0.25, 3.7];

 pin_headers = [ 2p54header ];

--- a/vitamins/potentiometer.scad
+++ b/vitamins/potentiometer.scad
@@ -0,0 +1,207 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+//! Potentiometers and rotary encoders
+include <../utils/core/core.scad>
+use <../utils/rounded_cylinder.scad>
+use <../utils/round.scad>
+use <../utils/thread.scad>
+
+pot_nut_t = 2;
+pot_proud = 0.3;
+spigot_r = 0.5;
+tab = [3.2, 0.5];
+
+function pot_body(type)     = type[0];  //! Body diameter or width & depth, height and corner radius
+function pot_face(type)     = type[1];  //! Faceplate rib width, plate depth and plate height
+function pot_wafer(type)    = type[2];  //! Width, diameter and thickness of the track wafer plus true if curved
+function pot_gangs(type)    = type[3];  //! Number of gangs for mult-gang pot
+function pot_thread_d(type) = type[4];  //! Nomininal thread diameter
+function pot_thread_p(type) = type[5];  //! Thread pritch
+function pot_thread_h(type) = type[6];  //! Height of threaded part
+function pot_boss_d(type)   = type[7];  //! Boss diameter
+function pot_boss_h(type)   = type[8];  //! Boss height
+function pot_spigot(type)   = type[9];  //! Spigot width, length and height above the boss
+function pot_spigot_x(type) = type[10]; //! Spigot offset from the shaft centre
+function pot_shaft(type)    = type[11]; //! Diameter, flat diameter, length and flat/slot length and colour. If flat diameter is less than the radius then it is a slot width
+function pot_neck(type)     = type[12]; //! Diameter and length of the shaft neck
+
+function pot_size(type) = let(d = pot_body(type)) len(d) > 3 ? [d.x , d.y, d.z] : [d.x, d.x, d.y]; //! Get pot body dimensions
+
+function pot_z(type) = pot_thread_h(type) - pot_nut_t - pot_proud; //! Ideal distance behind panel surface to get the nut on comfortably
+function pot_spigot_r(type) = let(sp = pot_spigot(type)) sp.x > 2 * spigot_r ? spigot_r : 0;
+
+module potentiometer(type, thickness = 3, shaft_length = undef) {//! Draw a potentiometer with nut spaced by specified thickness
+    bh = pot_boss_h(type);
+    s = pot_size(type);
+    face =  pot_face(type);
+    wafer =  pot_wafer(type);
+    wafer_z = wafer? wafer.z : 0;
+    round = len(pot_body(type)) < 4;
+    dia_cast_colour = grey(60);
+    thread_d = pot_thread_d(type);
+    thread_h = pot_thread_h(type);
+    shaft = pot_shaft(type);
+
+    color(dia_cast_colour) {
+        // Boss
+        if(bh)
+            cylinder(d = pot_boss_d(type), h = bh);
+
+        if(face) {
+            if(face.x) {
+                linear_extrude(face.z)
+                    square([face.x, face.y], center = true);
+
+                linear_extrude(bh)
+                    difference() {
+                        square([face.x, face.y], center = true);
+
+                        square([face.x - 2 * face.z, s.x], center = true);
+                    }
+            }
+            translate_z(bh - face.z)
+                linear_extrude(face.z)
+                    intersection() {
+                        circle(d = s.x - eps);
+
+                        difference() {
+                            square([s.x + eps, face.y], center = true);
+
+                            if(face.x)
+                                square([face.x - 2 * face.z, s.x], center = true);
+                        }
+                    }
+        }
+
+        // spigot
+        x = pot_spigot_x(type);
+        sp = pot_spigot(type);
+        if(x)
+            translate([x, 0, bh])
+                vflip()
+                    rounded_rectangle(sp + [0, 0, bh], pot_spigot_r(type));
+        // thread
+        vflip()
+            if(show_threads)
+                male_metric_thread(thread_d, pot_thread_p(type), thread_h, center = false, bot = 0, colour = dia_cast_colour);
+            else
+                cylinder(d = thread_d, h = pot_thread_h(type));
+    }
+
+    d = pot_body(type);
+    fz = face ? face.z : 0;
+    gap = face ? face.z + tab[1] : 0;
+    total_h = s.z - bh;
+    gangs = pot_gangs(type);
+    gang_h = (total_h - (gangs - 1) * gap) / gangs;
+    pitch = gang_h + gap;
+    for(i = [0 : gangs - 1])
+        translate_z(bh + i * pitch) {
+            // Wafer that carries the track and contacts
+            if(wafer)
+                color("sienna") {
+                    linear_extrude(wafer.z) round(wafer[3] ? 1 : 0) {
+                        if(round)
+                            circle(d = s.x - eps);
+                        else
+                            rounded_square([s.x, s.y], d[3]);
+
+                        intersection() {
+                            translate([0, -s.y / 2])
+                                square([wafer.x, (wafer.y - s.y) * 2], center = true);
+
+                            if(wafer[3])
+                                circle(wafer.y - s.y / 2);
+                            else
+                                square(100, center = true);
+                        }
+                    }
+                }
+
+            color(silver) {
+                // Body
+                translate_z(wafer_z)
+                    if(round)
+                        rounded_cylinder(r = s.x / 2, r2 = d[2], h = gang_h - wafer_z);
+                    else
+                        rounded_rectangle([s.x, s.y, gang_h - wafer_z], d[3]);
+
+                // Make tabs that hold the face on
+                if(face) {
+                    translate_z(-tab[1] - fz)
+                        linear_extrude(face.z + tab[1] + wafer_z)
+                            intersection() {
+                                circle(d = s.x);
+
+                                for(x = [-1, 1], y = [-1, 1], a = y * 90 + 90 + x * 30)
+                                    rotate(a)
+                                        translate([s.x / 2, 0])
+                                            slot(r = tab.x / 2, l = (s.x - pot_boss_d(type)) / 2 - tab.x / 2, h = 0);
+                            }
+                }
+            }
+
+            // Face plate between sections
+            if(face && i) {
+                color(dia_cast_colour)
+                    translate_z(-fz)
+                        linear_extrude(fz)
+                            intersection() {
+                                circle(d = s.x - eps);
+
+                            square([s.x + eps, face.y], center = true);
+                         }
+
+                color(shaft[4])
+                    vflip()
+                    cylinder(d = shaft.x, h = gap);
+            }
+        }
+
+    // Shaft
+    color(shaft[4])
+        translate_z(-thread_h) vflip() {
+                shaft_z = is_undef(shaft_length) ? shaft.z : min(shaft_length, shaft.z);
+                flat_h = shaft[3] - (shaft.z - shaft_z);
+                plain = shaft_z - flat_h;
+                neck = pot_neck(type);
+                neck_h = neck[1];
+
+                if(neck_h)
+                    cylinder(d = neck.x, h = neck_h);
+
+                if(plain - neck_h > 0)
+                    translate_z(neck_h)
+                        cylinder(d = shaft.x, h = plain - neck_h);
+
+                if(flat_h)
+                    translate_z(plain)
+                        linear_extrude(flat_h)
+                            difference() {
+                                circle(d = shaft.x);
+
+                                if(shaft.y > shaft.x / 2)
+                                    translate([0, shaft.x / 2])
+                                        square([shaft.x, 2 * (shaft.x - shaft.y)], center = true);
+                                else
+                                    if(shaft.y)
+                                        square([shaft.y, shaft.x + 1], center = true);
+                            }
+            }
+}
--- a/vitamins/potentiometers.scad
+++ b/vitamins/potentiometers.scad
@@ -0,0 +1,29 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+//! Potentiometers and rotary encoders
+//                body     h     r     face               wafer                 gangs thread d   pitch       h     boss  h    spigot w, l, h  offset  shaft d flat h flat h   colour     neck
+imperial_pot_x2 = [[24,     22.5, 1.5], [5.7, 15.33, 0.8], [20, 28, 1.6, true],  2,   inch(3/8), inch(1/32), 6.35, 13.6, 2.4, [1.12, 3.03, 2],    11, [6.27, 5.5, 44.3, 44.3, silver],   [0, 0]];
+imperial_pot    = [[24,     12,   1.5], [5.7, 15.33, 0.8], [20, 28, 1.6, true],  1,   inch(3/8), inch(1/32), 6.35, 13.6, 2.4, [1.12, 3.03, 2],    11, [6.27, 5.5, 44.3, 44.3, grey(95)], [0, 0]];
+metric_pot      = [[23,     11,   1.0], [0, 15.33, 0.8],   [18, 27, 1.2, false], 1,   10,        0.75,       7.32, 13.9, 2.5, [1.12, 2.88, 1.26], 11, [6.27, 5.5, 43.8, 43.5, grey(50)], [0, 0]];
+KY_040_encoder  = [[12, 12, 6.5,  1.0], false,             false,                1,    7,        0.75,       7,    0,    0,   [0.4,  2,     0.8],5.8, [6,    4.5, 13,   10,   grey(60)], [4, 0.5]];
+BTT_encoder     = [[12, 11, 6,    0.5], false,             false,                1,    6,        0.8,        4.5,  0,    0,   false,               0, [5,    0.75, 9.5, 9,    silver],   [3, 0.5]];
+
+potentiometers = [BTT_encoder, KY_040_encoder, metric_pot, imperial_pot, imperial_pot_x2];
+
+use <potentiometer.scad>
--- a/vitamins/rails.scad
+++ b/vitamins/rails.scad
@@ -16,33 +16,41 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>

 //
 // Rails
 //
-//                Wr  Hr  Emin    P   D    d    h                                       go    gw
-MGN5 = [ "MGN5",   5,  3.6,  5,   15, 3.6, 2.4, 0.8, M2_cs_cap_screw, M2_cs_cap_screw,  1,    1 ]; // Screw holes too small for M2 heads
-MGN7 = [ "MGN7",   7,  5,    5,   15, 4.3, 2.4, 2.6, M2_cap_screw,    M2_cs_cap_screw,  1.5,  1.5 ];
-MGN9 = [ "MGN9",   9,  6,    5,   20, 6.0, 3.5, 3.5, M3_cap_screw,    M3_cs_cap_screw,  1.5,  1.5 ];
-MGN12 =[ "MGN12", 12,  8,  7.5,   25, 6.0, 3.5, 4.5, M3_cap_screw,    M3_cs_cap_screw,  2.25, 2.75];
-MGN15 =[ "MGN15", 15, 10,   10,   40, 6.0, 3.5, 5.0, M3_cap_screw,    M3_cs_cap_screw,  2.5,  2.75 ];
-SSR15= [ "SSR15", 15, 12.5, 10,   60, 7.5, 4.5, 5.3, M4_cap_screw,    M4_cs_cap_screw,  2.5,  2.75 ];
+//                    Wr  Hr   Emin P   D    d    h                                       go    gw
+MGN5   = [ "MGN5",    5,  3.6,  5,  15, 3.6, 2.4, 0.8, M2_cs_cap_screw, M2_cs_cap_screw,  1,    1 ]; // Screw holes too small for M2 heads
+MGN7   = [ "MGN7",    7,  5,    5,  15, 4.3, 2.4, 2.6, M2_cap_screw,    M2_cs_cap_screw,  1.5,  1.5 ];
+MGN9   = [ "MGN9",    9,  6,    5,  20, 6.0, 3.5, 3.5, M3_cap_screw,    M3_cs_cap_screw,  1.5,  1.5 ];
+MGN12  = [ "MGN12",   12, 8,   7.5, 25, 6.0, 3.5, 4.5, M3_cap_screw,    M3_cs_cap_screw,  2.25, 2.75 ];
+MGN15  = [ "MGN15",   15, 10,   10, 40, 6.0, 3.5, 5.0, M3_cap_screw,    M3_cs_cap_screw,  2.5,  2.75 ];
+SSR15  = [ "SSR15",   15, 12.5, 10, 60, 7.5, 4.5, 5.3, M4_cap_screw,    M4_cs_cap_screw,  2.5,  2.75 ];
+HGH15CA= [ "HGH15CA", 15, 15,   20, 60, 7.5, 4.5, 5.3, M4_cap_screw,    M4_cs_cap_screw,  2.5,  2.75 ];
+HGH20CA= [ "HGH20CA", 20, 17.5, 20, 60, 9.5, 6.0, 8.5, M5_cap_screw,    M5_cs_cap_screw,  2.5,  2.75 ];
 //
 // Carriages
 //
-//                           L     L1    W   H   H1   C    B
-MGN5C_carriage  = ["MGN5C",  16,    9.6, 12,  6, 1.5, 0,   8, M2_cap_screw, MGN5 ];
-MGN7C_carriage  = ["MGN7C",  23,   14.3, 17,  8, 1.5, 8,  12, M2_cap_screw, MGN7 ];
-MGN7H_carriage  = ["MGN7H",  30.8, 21.8, 17,  8, 1.5,13,  12, M2_cap_screw, MGN7 ];
-MGN9C_carriage  = ["MGN9C",  29.7, 20.8, 20, 10, 2,  10,  15, M3_cap_screw, MGN9 ];
-MGN9H_carriage  = ["MGN9H",  39.9, 29.9, 20, 10, 2,  16,  15, M3_cap_screw, MGN9 ];
-MGN12C_carriage = ["MGN12C", 34.7, 21.7, 27, 13, 3,  15,  20, M3_cap_screw, MGN12 ];
-MGN12H_carriage = ["MGN12H", 45.4, 32.4, 27, 13, 3,  20,  20, M3_cap_screw, MGN12 ];
-MGN15C_carriage = ["MGN15C", 43.3, 27.7, 32, 16, 4,  20,  25, M3_cap_screw, MGN15 ];
-SSR15_carriage  = ["SSR15",  40.3, 23.3, 34, 24, 4.5, 0,  26, M4_cap_screw, SSR15 ];
+//                            L     L1    W   H   H1   C   B
+MGN5C_carriage  = [ "MGN5C",   16,    9.6, 12,  6, 1.5, 0,  8,  M2_cap_screw, MGN5 ];
+MGN7C_carriage  = [ "MGN7C",   23,   14.3, 17,  8, 1.5, 8,  12, M2_cap_screw, MGN7 ];
+MGN7H_carriage  = [ "MGN7H",   30.8, 21.8, 17,  8, 1.5, 13, 12, M2_cap_screw, MGN7 ];
+MGN9C_carriage  = [ "MGN9C",   29.7, 20.8, 20, 10, 2,   10, 15, M3_cap_screw, MGN9 ];
+MGN9H_carriage  = [ "MGN9H",   39.9, 29.9, 20, 10, 2,   16, 15, M3_cap_screw, MGN9 ];
+MGN12C_carriage = [ "MGN12C",  34.7, 21.7, 27, 13, 3,   15, 20, M3_cap_screw, MGN12 ];
+MGN12H_carriage = [ "MGN12H",  45.4, 32.4, 27, 13, 3,   20, 20, M3_cap_screw, MGN12 ];
+MGN15C_carriage = [ "MGN15C",  43.3, 27.7, 32, 16, 4,   20, 25, M3_cap_screw, MGN15 ];
+HGH15CA_carriage= [ "HGH15CA", 61.4, 39.4, 34, 28, 4,   26, 26, M4_cap_screw, HGH15CA ];
+HGH20CA_carriage= [ "HGH20CA", 77.5, 50.5, 44, 30, 4.6, 35, 32, M5_cap_screw, HGH20CA ];
+SSR15_carriage  = [ "SSR15",   40.3, 23.3, 34, 24, 4.5, 0,  26, M4_cap_screw, SSR15 ];

-rails = [MGN5, MGN7, MGN9, MGN12, MGN15, SSR15];
+rails = [MGN5, MGN7, MGN9, MGN12, MGN15, SSR15, HGH15CA, HGH20CA];

-carriages = [MGN5C_carriage, MGN7C_carriage, MGN7H_carriage, MGN9C_carriage, MGN9H_carriage, MGN12C_carriage, MGN12H_carriage, MGN12H_carriage, MGN15C_carriage, SSR15_carriage];
+carriages = [MGN5C_carriage, MGN7C_carriage, MGN7H_carriage, MGN9C_carriage, MGN9H_carriage, 
+            MGN12C_carriage, MGN12H_carriage, MGN12H_carriage, MGN15C_carriage, SSR15_carriage,
+            HGH15CA_carriage, HGH20CA_carriage
+            ];

 use <rail.scad>
--- a/vitamins/screws.scad
+++ b/vitamins/screws.scad
@@ -79,9 +79,11 @@ M2_cs_cap_screw  = ["M2_cs_cap","M2 cs cap",    hs_cs_cap,2, 3.8, 0,    0.65,1.3
 M3_cs_cap_screw  = ["M3_cs_cap","M3 cs cap",    hs_cs_cap,3, 6.0, 0,    1.05,2.0, 18,  M3_washer, M3_nut,   M3_tap_radius,    M3_clearance_radius];
 M4_cs_cap_screw  = ["M4_cs_cap","M4 cs cap",    hs_cs_cap,4, 8.0, 0,    1.49,2.5, 20,  M4_washer, M4_nut,   M4_tap_radius,    M4_clearance_radius];
 M5_cs_cap_screw  = ["M5_cs_cap","M5 cs cap",    hs_cs_cap,5,10.0, 0,    3.00,3.0, 22,  M5_washer, M5_nut,   M5_tap_radius,    M5_clearance_radius];
-M6_cs_cap_screw  = ["M6_cs_cap","M6 cs cap",    hs_cs_cap,6,12.0, 0,    3.00,4.0, 24,  M6_washer, M6_nut,   M6_tap_radius,    M6_clearance_radius];
+M6_cs_cap_screw  = ["M6_cs_cap","M6 cs cap",    hs_cs_cap,6,12.0, 0,    2.50,4.0, 24,  M6_washer, M6_nut,   M6_tap_radius,    M6_clearance_radius];
+M8_cs_cap_screw  = ["M8_cs_cap","M8 cs cap",    hs_cs_cap,8,16.0, 0,    3.50,5.0, 28,  M8_washer, M8_nut,   M8_tap_radius,    M8_clearance_radius];

 M2_dome_screw    = ["M2_dome", "M2 dome",       hs_dome,  2, 3.5, 1.3,  0.6, 1.3, 16,  M2_washer, M2_nut,   M2_tap_radius,    M2_clearance_radius];
+M2p5_dome_screw  = ["M2p5_dome", "M2.5 dome",   hs_dome,2.5, 5.35,1.6,  0.8, 2.0, 17,M2p5_washer, M2p5_nut, M2p5_tap_radius,  M2p5_clearance_radius];
 M3_dome_screw    = ["M3_dome", "M3 dome",       hs_dome,  3, 5.7, 1.65, 1.04,2.0, 18,  M3_washer, M3_nut,   M3_tap_radius,    M3_clearance_radius];
 M4_dome_screw    = ["M4_dome", "M4 dome",       hs_dome,  4, 7.6, 2.2,  1.3, 2.5, 20,  M4_washer, M4_nut,   M4_tap_radius,    M4_clearance_radius];
 M5_dome_screw    = ["M5_dome", "M5 dome",       hs_dome,  5, 9.5, 2.75, 1.56,3.0, 22,  M5_washer, M5_nut,   M5_tap_radius,    M5_clearance_radius];
@@ -102,7 +104,9 @@ M8_hex_screw     = ["M8_hex", "M8 hex",         hs_hex,   8, 15,  5.65,   0,   0
 M3_low_cap_screw = ["M3_low_cap", "M3 low cap", hs_cap,   3, 5.5, 2,    1.5, 2.0, 18,  M3_washer, M3_nut,   M3_tap_radius,    M3_clearance_radius];

 M3_grub_screw    = ["M3_grub", "M3 grub",       hs_grub,  3,   0, 0,    2.5, 1.5, 0,   M3_washer, M3_nut,   M3_tap_radius,    M3_clearance_radius];
-M4_grub_screw    = ["M4_grub", "M4 grub",       hs_grub,  4,   0, 0,    2.4, 2.5, 0,   M4_washer, M4_nut,   M4_tap_radius,    M4_clearance_radius];
+M4_grub_screw    = ["M4_grub", "M4 grub",       hs_grub,  4,   0, 0,    2.4, 2.0, 0,   M4_washer, M4_nut,   M4_tap_radius,    M4_clearance_radius];
+M5_grub_screw    = ["M5_grub", "M5 grub",       hs_grub,  5,   0, 0,    2.4, 2.5, 0,   M5_washer, M5_nut,   M5_tap_radius,    M5_clearance_radius];
+M6_grub_screw    = ["M6_grub", "M6 grub",       hs_grub,  6,   0, 0,    2.4, 3.0, 0,   M6_washer, M6_nut,   M6_tap_radius,    M6_clearance_radius];

 No2_screw        = ["No2", "No2 pan wood",      hs_pan, 2.2, 4.2, 1.7,    0,   0, 0, M2p5_washer, false,    No2_pilot_radius, No2_clearance_radius];
 No4_screw        = ["No4", "No4 pan wood",      hs_pan, 3.0, 5.5, 2.0,    0,   0, 0 ,M3p5_washer, false,    No4_pilot_radius, No4_clearance_radius];
@@ -113,12 +117,12 @@ No8_screw        = ["No8", "No8 pan wood",      hs_pan, 4.2, 8.2, 3.05,   0,   0
 screw_lists = [
 [ M2_cap_screw,    M2p5_cap_screw, M3_cap_screw,    M4_cap_screw,    M5_cap_screw,    M6_cap_screw, M8_cap_screw],
 [ 0,               0,              M3_low_cap_screw],
-[ M2_cs_cap_screw, 0,              M3_cs_cap_screw, M4_cs_cap_screw, M5_cs_cap_screw, M6_cs_cap_screw],
-[ M2_dome_screw,   0,              M3_dome_screw,   M4_dome_screw,   M5_dome_screw],
+[ M2_cs_cap_screw, 0,              M3_cs_cap_screw, M4_cs_cap_screw, M5_cs_cap_screw, M6_cs_cap_screw, M8_cs_cap_screw],
+[ M2_dome_screw,   M2p5_dome_screw,M3_dome_screw,   M4_dome_screw,   M5_dome_screw],
 [ 0,               0,              M3_hex_screw,    M4_hex_screw,    M5_hex_screw,    M6_hex_screw, M8_hex_screw],
 [ 0,               M2p5_pan_screw, M3_pan_screw,    M4_pan_screw,    M5_pan_screw,    M6_pan_screw, No632_pan_screw],
 [ No2_screw,       0,              No4_screw,       No6_screw,       No8_screw,       No6_cs_screw],
-[ 0,               0,              M3_grub_screw,   M4_grub_screw]
+[ 0,               0,              M3_grub_screw,   M4_grub_screw,   M5_grub_screw,   M6_grub_screw]
 ];

 use <screw.scad>
--- a/vitamins/servo_motor.scad
+++ b/vitamins/servo_motor.scad
@@ -0,0 +1,140 @@
+//
+// NopSCADlib Copyright Niclas Hedhman 2018
+// niclas@hedhman.org
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+
+//
+//! BLDC servos for CNC machines
+//
+
+include <../core.scad>
+include <../utils/tube.scad>
+include <../utils/round.scad>
+include <../utils/quadrant.scad>
+include <../utils/rounded_cylinder.scad>
+
+function servo_motor_cap(type)       = type[2]; //! Diameter height and corner radius of encoder cover
+function servo_motor_length(type)    = type[3]; //! Total length from the faceplate
+function servo_motor_shaft(type)     = type[4]; //! Shaft type
+function servo_motor_faceplate(type) = type[5]; //! Face plate type
+
+function faceplate_width(type)          = type[1]; //! Width of faceplate
+function faceplate_thickness(type)      = type[2]; //! Thickness of the faceplate
+function faceplate_boss_size(type)      = type[3]; //! Centre boss outer d, inner d and height
+function faceplate_hole_pitch(type)     = type[4]; //! Screw hole pitch
+function faceplate_hole_dia(type)       = type[5]; //! Screw hole size
+
+function servo_motor_width(type) = faceplate_width(servo_motor_faceplate(type)); //! Width of the motor body
+
+function shaft_type(type)       = type[0]; //! String to indicate the shaft type
+function shaft_diameter(type)   = type[1]; //! Shaft diameter
+function shaft_length(type)     = type[2]; //! Shaft length
+function shaft_key_size(type)   = type[3]; //! Keyway [length, width, depth]
+
+module servo_motor(type) { //! Draw the specified servo
+    fplate = servo_motor_faceplate(type);
+    t = faceplate_thickness(fplate);
+    w = servo_motor_width(type);
+    inset = (w - faceplate_hole_pitch(fplate)) / 2;
+    cap = servo_motor_cap(type);
+    l = servo_motor_length(type);
+
+    vitamin(str("servo_motor(", type[0], ") : Servo ", type[1], " ", fplate[0], " mount ", servo_motor_width(type), " x ", servo_motor_length(type), "mm"));
+
+    color(grey(20))
+        translate_z(-l + cap.z) {
+            linear_extrude(l - t - cap.z)
+                round(2)
+                    difference() {
+                        square([w, w], center = true);
+
+                        faceplate_screw_positions(fplate)
+                            rotate($i * 90 + 180)
+                                quadrant(w = 2 * inset, r = inset, center = true);
+                    }
+
+            vflip()
+                rounded_cylinder(r = cap.x / 2, r2 = cap.y, h = cap.z);
+        }
+
+    motor_shaft(servo_motor_shaft(type));
+
+    motor_faceplate(fplate);
+}
+
+module motor_shaft(type) { //! Draw the specified motor shaft
+    diameter = shaft_diameter(type);
+    length = shaft_length(type);
+    key_size = shaft_key_size(type);
+    key_r = key_size.y / 2;
+
+    color("silver")
+        if( shaft_type(type) == "keyed" ) {
+            render() difference() {
+                cylinder(h = length, d = diameter);
+
+                translate([diameter / 2, 0, length])
+                    rotate([0, 90, 0])
+                        slot(r = key_r, l = 2 * (key_size.x - key_r), h = 2 * key_size.z);
+            }
+        }
+}
+
+module servo_screw_positions(type) //! Position children at screw positions
+    faceplate_screw_positions(servo_motor_faceplate(type))
+        children();
+
+module faceplate_screw_positions(type) //! Position children at faceplate screw positions
+    for($i = [0 : 3])
+        let(corner = [[1, 1], [-1, 1], [-1,-1], [1, -1]][$i], pitch = faceplate_hole_pitch(type))
+            translate(corner * pitch / 2)
+                children();
+
+module motor_faceplate(type) { //! Draw specified motor faceplate
+    w = faceplate_width(type);
+    t = faceplate_thickness(type);
+    boss = faceplate_boss_size(type);
+    boss_r = boss[0] / 2;
+    boss_ir = boss[1] / 2;
+    boss_t = boss.z;
+    rad = 5; // corner radius
+
+    translate_z(-t) {
+        color(silver)
+            linear_extrude(t)
+                difference() {
+                    rounded_square([w - eps, w - eps], rad);
+
+                    faceplate_screw_positions(type)
+                        circle(d = faceplate_hole_dia(type));
+                }
+
+        color(grey(10))
+            translate_z(eps)
+                linear_extrude(t - 2 * eps)
+                    difference() {
+                        rounded_square([w, w], rad);
+
+                        faceplate_screw_positions(type)
+                            circle(d = faceplate_hole_dia(type) + eps);
+                    }
+    }
+
+    color(grey(10))
+        tube(h = boss_t, or = boss_r - eps, ir = boss_ir + eps, center = false);
+
+    color(silver)
+        tube(h = boss_t - eps, or = boss_r, ir = boss_ir, center = false);
+}
--- a/vitamins/servo_motors.scad
+++ b/vitamins/servo_motors.scad
@@ -0,0 +1,33 @@
+//
+// NopSCADlib Copyright Niclas Hedhman 2018
+// niclas@hedhman.org
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+
+
+//                   type      w,  t,  boss,        pitch, screw dia
+80ST_faceplate = [ "80ST",     80, 8,  [70, 34, 3], 63.63, 6 ];
+
+//                   type,    dia, len, key length, width, depth
+Shaft_19mm_keyed = [ "keyed", 19,  35, [25, 6, 3.5] ];
+
+//                      Code,                   Description,                    Cap,         Length, Shaft,         Faceplate
+Lichuan_M01330_80ST = [ "Lichuan_M01330_80ST", "Lichuan LCMT07L02NB-80M01330B", [70, 3, 38], 123, Shaft_19mm_keyed, 80ST_faceplate ];
+Lichuan_M02430_80ST = [ "Lichuan_M02430_80ST", "Lichuan LCMT07L02NB-80M02430B", [70, 3, 38], 150, Shaft_19mm_keyed, 80ST_faceplate ];
+Lichuan_M03530_80ST = [ "Lichuan_M03530_80ST", "Lichuan LCMT07L02NB-80M03530B", [70, 3, 38], 178, Shaft_19mm_keyed, 80ST_faceplate ];
+Lichuan_M04030_80ST = [ "Lichuan_M04030_80ST", "Lichuan LCMT07L02NB-80M04030B", [70, 3, 38], 190, Shaft_19mm_keyed, 80ST_faceplate ];
+
+servo_motors = [Lichuan_M01330_80ST, Lichuan_M02430_80ST, Lichuan_M03530_80ST, Lichuan_M04030_80ST];
+
+use <servo_motor.scad>
--- a/vitamins/sheets.scad
+++ b/vitamins/sheets.scad
@@ -31,6 +31,7 @@ MDF10     = [ "MDF10",     "Sheet MDF",              10, mdf_colour,
 MDF12     = [ "MDF12",     "Sheet MDF",              12, mdf_colour,             true];    // ~1/2"
 MDF18     = [ "MDF18",     "Sheet MDF",              18, mdf_colour,             true];
 MDF19     = [ "MDF19",     "Sheet MDF",              19, mdf_colour,             true];    // ~3/4"
+PMMA1p25  = [ "PMMA1p25",  "Sheet acrylic",         1.25,[1,   1,   1,   0.5  ], false];
 PMMA2     = [ "PMMA2",     "Sheet acrylic",           2, [1,   1,   1,   0.5  ], false];
 PMMA3     = [ "PMMA3",     "Sheet acrylic",           3, [1,   1,   1,   0.5  ], false];   // ~1/8"
 PMMA6     = [ "PMMA6",     "Sheet acrylic",           6, [1,   1,   1,   0.5  ], false];   // ~1/4"
@@ -42,6 +43,9 @@ DiBond6   = [ "DiBond6",   "Sheet DiBond",            6, [0.2, 0.2, 0.2, 1    ],
 Cardboard = [ "Cardboard", "Corrugated cardboard",    5, [0.8, 0.6, 0.3, 1    ], false];
 FoilTape  = [ "FoilTape",  "Aluminium foil tape",   0.05,[0.9, 0.9, 0.9, 1    ], false];
 Foam20    = [ "Foam20",    "Foam sponge",             20,[0.3, 0.3, 0.3, 1    ], true];
+AL1_6     = [ "AL1_6",     "Aluminium tooling plate", 1.6, [0.5, 0.5, 0.5, 0.5], false];
+AL2       = [ "AL2",       "Aluminium tooling plate", 2, [0.9, 0.9, 0.9, 1    ], false];
+AL3       = [ "AL3",       "Aluminium tooling plate", 3, [0.9, 0.9, 0.9, 1    ], false];
 AL6       = [ "AL6",       "Aluminium tooling plate", 6, [0.9, 0.9, 0.9, 1    ], false];
 AL8       = [ "AL8",       "Aluminium tooling plate", 8, [0.9, 0.9, 0.9, 1    ], false];
 Steel06   = [ "Steel06",   "Sheet mild steel",       0.6,"silver"              , false];
@@ -52,7 +56,7 @@ CF2 =       [ "CF2",       "Sheet carbon fiber",      2, grey(35),
 CF3 =       [ "CF3",       "Sheet carbon fiber",      3, grey(35),               false,  2,  2,  grey(20)];


-sheets = [CF1, CF2, CF3, MDF6, MDF10, MDF12, MDF19, PMMA2, PMMA3, PMMA6, PMMA8, PMMA10,
-         glass2, DiBond, DiBond6, Cardboard, FoilTape, AL6, AL8, Steel06, Spring05, Silicone3, Foam20];
+sheets = [CF1, CF2, CF3, MDF6, MDF10, MDF12, MDF19, PMMA1p25, PMMA2, PMMA3, PMMA6, PMMA8, PMMA10,
+         glass2, DiBond, DiBond6, Cardboard, FoilTape, AL1_6, AL2, AL3, AL6, AL8, Steel06, Spring05, Silicone3, Foam20];

 use <sheet.scad>
--- a/vitamins/stepper_motor.scad
+++ b/vitamins/stepper_motor.scad
@@ -30,20 +30,25 @@ use <../utils/round.scad>
 use <washer.scad>
 use <rod.scad>

-function NEMA_width(type)       = type[1]; //! Width of the square face
-function NEMA_length(type)      = type[2]; //! Body length
-function NEMA_radius(type)      = type[3]; //! End cap radius
-function NEMA_body_radius(type) = type[4]; //! Body radius
-function NEMA_boss_radius(type) = type[5]; //! Boss around the spindle radius
-function NEMA_boss_height(type) = type[6]; //! Boss height
-function NEMA_shaft_dia(type)   = type[7]; //! Shaft diameter
-function NEMA_shaft_length(type)= type[8]; //! Shaft length above the face, if a list then a leadscrew: length, lead, starts
-function NEMA_hole_pitch(type)  = type[9]; //! Screw hole pitch
-function NEMA_cap_heights(type) = type[10]; //! Height of the end cap at the corner and the side
+function NEMA_width(type)        = type[1]; //! Width of the square face
+function NEMA_length(type)       = type[2]; //! Body length
+function NEMA_radius(type)       = type[3]; //! End cap radius
+function NEMA_body_radius(type)  = type[4]; //! Body radius
+function NEMA_boss_radius(type)  = type[5]; //! Boss around the spindle radius
+function NEMA_boss_height(type)  = type[6]; //! Boss height
+function NEMA_shaft_dia(type)    = type[7]; //! Shaft diameter
+function NEMA_shaft_length(type) = type[8]; //! Shaft length above the face, if a list then a leadscrew: length, lead, starts
+function NEMA_hole_pitch(type)   = type[9]; //! Screw hole pitch
+function NEMA_cap_heights(type)  = type[10]; //! Height of the end cap at the corner and the side
+function NEMA_thread_d(type)     = type[11]; //! Screw hole diameter
+function NEMA_black_caps(type)   = type[12]; //! End caps are black
+function NEMA_end_connector(type)= type[13]; //! If has a connector then plug goes in the end rather than the side
+function NEMA_shaft_length2(type)= type[14]; //! Rear shaft length if non-zero
+function NEMA_shaft_bore(type)   = type[15]; //! Hollow shaft in non-zero

 function NEMA_holes(type)       = [-NEMA_hole_pitch(type) / 2, NEMA_hole_pitch(type) / 2]; //! Screw positions for for loop
 function NEMA_big_hole(type)    = NEMA_boss_radius(type) + 0.2; //! Clearance hole for the big boss
-stepper_body_colour = "black";
+stepper_body_colour = grey(20);
 stepper_cap_colour  = grey(50);
 stepper_machined_colour = grey(90);

@@ -65,11 +70,21 @@ module NEMA(type, shaft_angle = 0, jst_connector = false) { //! Draw specified N
    cap = NEMA_cap_heights(type)[1];
    cap2 = NEMA_cap_heights(type)[0];
    vitamin(str("NEMA(", type[0], "): Stepper motor NEMA", round(NEMA_width(type) / 2.54), " x ", length, "mm"));
-    thread_d = 3;                                                       // Is this always the case?
+    thread_d = NEMA_thread_d(type);
+    corner_r = 0.9;
+    bore = NEMA_shaft_bore(type);
+    end_connector = NEMA_end_connector(type) && jst_connector;
+    header = end_connector ? jst_zh_header : jst_ph_header;
+    socket_size = hdr_box_size(header);
+    pcb_thickness = 1.6;
+    tabSize = [16, 4, cap - hdr_ra_height(header) - pcb_thickness];
+    pins = 6;
+    end_conn_w = socket_size.x + hdr_pitch(header) * (pins - 1);
+    end_conn_inset = socket_size.y - 2;

    module cap_shape(end)
-        round(0.5, $fn = 32) difference() {
-            intersection() {
+        difference() {
+            round(corner_r, $fn = 32) intersection() {
                square([side, side], center = true);

                circle(NEMA_radius(type), $fn = 360);
@@ -78,15 +93,26 @@ module NEMA(type, shaft_angle = 0, jst_connector = false) { //! Draw specified N
                for(x = NEMA_holes(type), y = NEMA_holes(type))
                    translate([x, y])
                        circle(d = thread_d);
+
+            if(bore)
+                circle(d = bore + eps);
+
+            if(end_connector && end < 0)
+                translate([0, side / 2])
+                    square([end_conn_w, end_conn_inset * 2], true);
        }

    color(stepper_body_colour)                                          // black laminations
        translate_z(-length / 2)
            linear_extrude(length - cap * 2, center = true)
-                intersection() {
-                    square([side, side], center = true);
+                difference() {
+                    round(corner_r, $fn = 32)
+                        intersection() {
+                            square([side, side], center = true);

-                    circle(body_rad);
+                            circle(body_rad);
+                        }
+                    circle(d = bore + eps);
                }

    color(stepper_machined_colour) {
@@ -96,11 +122,8 @@ module NEMA(type, shaft_angle = 0, jst_connector = false) { //! Draw specified N
            cap_shape(1);
    }

-    pcb_thickness = 1.6;
-    header = jst_ph_header;
-    socket_size = hdr_box_size(header);
-    tabSize = [16, 4, cap - hdr_ra_height(header) - pcb_thickness];
-    color(stepper_cap_colour) {                                     // aluminium end caps
+    wing_t = 0.5;  // end connector side wings
+    color(NEMA_black_caps(type) ? "black" : stepper_cap_colour) {                                     // aluminium end caps
        for(end = [-1, 1]) {
            translate_z(-length / 2 + end * (length - cap) / 2)
                linear_extrude(cap, center = true)
@@ -116,20 +139,36 @@ module NEMA(type, shaft_angle = 0, jst_connector = false) { //! Draw specified N
        }

        if(jst_connector)
-            translate([-tabSize.x / 2, side / 2, -length])
-                cube(tabSize);
+            if(end_connector)
+                for(x = [-1, 1])
+                    translate([x * (end_conn_w / 2 + wing_t / 2), side / 2 - end_conn_inset, -length + cap / 2])
+                        cube([wing_t, socket_size.y * 2, cap], center = true);
+            else
+                translate([-tabSize.x / 2, side / 2, -length])
+                    cube(tabSize);
    }

-    if(jst_connector)
-        translate([0, side / 2, -length + cap - hdr_ra_height(header)]) {
-            rotate(180)
-                not_on_bom()
-                    jst_xh_header(header, 6, true);
+    if(jst_connector) not_on_bom()
+        if(end_connector) {
+            translate([0, side / 2 + hdr_y_offset(header) + socket_size.y / 2 - end_conn_inset, -length + socket_size.z])
+                rotate([180, 0, 0])
+                    jst_xh_header(header, pins, false, smt = true);

-            translate_z(-pcb_thickness / 2)
-                color("green")
-                    cube([socket_size.x + 5 * 2, tabSize.y * 2, pcb_thickness], true);
-        }
+            h = cap - socket_size.z;
+            translate([0, side / 2 + socket_size.y / 2 - end_conn_inset, -length + socket_size.z + h / 2])
+                color(grey(70))
+                    cube([end_conn_w, socket_size.y, h], center = true);
+
+            }
+        else
+            translate([0, side / 2, -length + cap - hdr_ra_height(header)]) {
+                rotate(180)
+                    jst_xh_header(header, pins, true, smt = true);
+
+                translate_z(-pcb_thickness / 2)
+                    color("green")
+                        cube([socket_size.x + 5 * 2, tabSize.y * 2, pcb_thickness], true);
+            }

    if(show_threads)
        for(x = NEMA_holes(type), y = NEMA_holes(type))
@@ -137,14 +176,15 @@ module NEMA(type, shaft_angle = 0, jst_connector = false) { //! Draw specified N
                female_metric_thread(thread_d, metric_coarse_pitch(thread_d), cap, colour = stepper_cap_colour);

    shaft =  NEMA_shaft_length(type);
-    translate_z(-5)
+    shaft2 = NEMA_shaft_length2(type);
+    translate_z(-length + eps - shaft2)
        rotate(shaft_angle)
            if(!is_list(shaft))
                color(stepper_machined_colour)
-                    cylinder(r = shaft_rad, h = shaft + 5);  // shaft
+                    tube(or = shaft_rad, ir = bore / 2, h = shaft + length + shaft2, center = false);  // shaft
            else
                not_on_bom()
-                    leadscrew(shaft_rad * 2, shaft.x + 5, shaft.y, shaft.z, center = false);
+                    leadscrew(shaft_rad * 2, shaft.x + length + shaft2, shaft.y, shaft.z, center = false);

    if(!jst_connector)
        translate([0, side / 2, -length + cap / 2])
--- a/vitamins/stepper_motors.scad
+++ b/vitamins/stepper_motors.scad
@@ -21,17 +21,20 @@
 // NEMA stepper motor model
 //

-//                                   corner  body    boss    boss          shaft
-//                     side, length, radius, radius, radius, depth, shaft, length,      holes, cap heights
-NEMA17  = ["NEMA17",   42.3, 47,     53.6/2, 25,     11,     2,     5,     24,          31,    [11.5,  9]];
-NEMA17M = ["NEMA17M",  42.3, 40,     53.6/2, 25,     11,     2,     5,     20,          31,    [12.5, 11]];
-NEMA17M8= ["NEMA17M8", 42.3, 40,     53.6/2, 25,     11,     2,     8,     [280, 8, 4], 31,    [12.5, 11]];
-NEMA17S = ["NEMA17S",  42.3, 34,     53.6/2, 25,     11,     2,     5,     24,          31,    [8,     8]];
-NEMA17P = ["NEMA17P",  42.3, 26.5,   53.6/2, 25,     11,     2,     5,     26.5,        31,    [10,    8]];
-NEMA16  = ["NEMA16",   39.5, 19.2,   50.6/2, 50.6/2, 11,     2,     5,     12,          31,    [8,     8]];
-NEMA14  = ["NEMA14",   35.2, 36,     46.4/2, 21,     11,     2,     5,     21,          26,    [8,     8]];
-NEMA23  = ["NEMA23",   56.4, 51.2,   75.7/2, 35,   38.1/2, 1.6,   6.35,    24,        47.1,    [8,     8]];
+//                                   corner  body    boss    boss          shaft               cap         thread black  end    shaft    shaft
+//                     side, length, radius, radius, radius, depth, shaft, length,      holes, heights,    dia,   caps,  conn,  length2, bore
+NEMA8   = ["NEMA8",      20, 30,       30/2, 20,    7.5,   1.6,     4,      6,          16,    [8,     8], 2,     true,  true,  0,       0];
+NEMA8BH = ["NEMA8BH",    20, 30,       30/2, 20,    7.5,   1.6,     5,     12,          16,    [8,     8], 2,     true,  true,  7,       2.8];
+NEMA17  = ["NEMA17",   42.3, 47,     53.6/2, 25,     11,     2,     5,     24,          31,    [11.5,  9], 3,     false, false, 0,       0];
+NEMA17M = ["NEMA17M",  42.3, 40,     53.6/2, 25,     11,     2,     5,     20,          31,    [12.5, 11], 3,     false, false, 0,       0];
+NEMA17M8= ["NEMA17M8", 42.3, 40,     53.6/2, 25,     11,     2,     8,     [280, 8, 4], 31,    [12.5, 11], 3,     false, false, 0,       0];
+NEMA17S = ["NEMA17S",  42.3, 34,     53.6/2, 25,     11,     2,     5,     24,          31,    [8,     8], 3,     false, false, 0,       0];
+NEMA17P = ["NEMA17P",  42.3, 26.5,   53.6/2, 25,     11,     2,     5,     26.5,        31,    [10,    8], 3,     false, false, 0,       0];
+NEMA16  = ["NEMA16",   39.5, 19.2,   50.6/2, 50.6/2, 11,     2,     5,     12,          31,    [8,     8], 3,     false, false, 0,       0];
+NEMA14  = ["NEMA14",   35.2, 36,     46.4/2, 21,     11,     2,     5,     21,          26,    [8,     8], 3,     false, false, 0,       0];
+NEMA23  = ["NEMA23",   56.4, 51.2,   75.7/2, 35,   38.1/2, 1.6,   6.35,    24,        47.1,    [8,     8], 3,     false, false, 0,       0];

-stepper_motors = [NEMA14, NEMA16, NEMA17P, NEMA17S, NEMA17M, NEMA17, NEMA23];
+stepper_motors = [NEMA8, NEMA8BH, NEMA14, NEMA16, NEMA17P, NEMA17S, NEMA17M, NEMA17, NEMA23];
+small_steppers = [];

 use <stepper_motor.scad>
Author	SHA1	Message	Date
Chris Palmer	f0c25d37b0	Workarounds for bugs in the OpenSCAD snapshots.	2021-09-12 18:02:43 +01:00
Chris Palmer	588a1edf62	Updated changelog.	2021-09-11 12:02:53 +01:00
Chris Palmer	3299aad5c8	Parametric potentiometers added, changes PCB "potentiometer" parameters. The first one is now the type that defaults to the previous BigTreeTech version. The second parameter is the shaft length overrride. Added ESP32_DOIT_V1, ArduinoNano and KY_040 breakout PCBs.	2021-09-11 12:01:04 +01:00
Chris Palmer	74c52aac04	Can now make perfboard without screw holes. Fixed missing items from last commit.	2021-09-11 11:54:26 +01:00
Chris Palmer	726d9ed2dc	Can now draw right angle Molex KK connectors and can skip pins to allow high voltage.	2021-09-11 11:51:24 +01:00
Chris Palmer	8a838dd1ce	Added pcb_grid_components() module for placing parts on a perfboard.	2021-09-11 11:46:25 +01:00
Chris Palmer	181c6ac624	Added vero_pin PCB component.	2021-09-11 11:44:36 +01:00
Chris Palmer	e952aa7840	PCB chip compoment can now be round if width is zero to fake round buttons.	2021-09-11 11:28:21 +01:00
Chris Palmer	466ee31e10	Added Jack_4mm_shielded_nut_radius().	2021-09-11 11:21:58 +01:00
Chris Palmer	4c926c529b	Fixed axial lead min pitch bug.	2021-09-11 11:20:37 +01:00
Chris Palmer	edb1eccbf1	TFT128x160 LCD display added.	2021-09-11 11:19:24 +01:00
Chris Palmer	061812cc8b	PMMA1p25 sheet added.	2021-09-11 11:16:43 +01:00
Chris Palmer	ce0c97b45e	7_segment displays added as PCB component.	2021-09-11 11:15:39 +01:00
Chris Palmer	696b14699c	Updated changelog.	2021-09-05 10:26:53 +01:00
Chris Palmer	2166a9be6a	extrusion_corner_bracket_assembly() and extrusion_inner_corner_bracket() can now be passed the extrusion type. E2020t and E4040t thinner extrusions added to work with the brackets. Extrusions can now have recessed channels, round or square centre sections and holes. Fixed the shape of extrusion centre section spars. T-nuts now have 45 degree chamfers instead of a fixed 1mm minimum thickness.	2021-09-05 10:24:42 +01:00
Chris Palmer	511729008d	Added missing documentation for sliding_t_nut().	2021-09-03 15:47:15 +01:00
Chris Palmer	5111ec04bc	E40_corner_bracket, E40_corner_bracket and M8_sliding_ball_t_nut added. Inner corner brackets now show the long arm with chamfered ridges rather than a normal T-nut and the grub screws are inserted to meet the extrusion.	2021-09-03 09:23:24 +01:00
Chris Palmer	cef3a620a6	Updated changelog	2021-08-31 23:41:34 +01:00
Chris Palmer	da5191e52c	Merge branch 'martinbudden-M2p5_dome_screw'	2021-08-31 23:40:51 +01:00
Chris Palmer	d9af5b7f70	Updated images and readme.	2021-08-31 23:38:34 +01:00
Chris Palmer	c30d7f1ad9	Merge branch 'M2p5_dome_screw' of https://github.com/martinbudden/NopSCADlib into martinbudden-M2p5_dome_screw	2021-08-31 23:15:56 +01:00
Chris Palmer	a5382cbe04	Updated changelog.	2021-08-31 23:03:22 +01:00
Chris Palmer	00c5c90a5e	Updated big picture	2021-08-31 23:00:58 +01:00
Chris Palmer	01c26d8a34	Added Lichuan servo motors contributed by Niclas Hedhman.	2021-08-31 22:51:24 +01:00
Chris Palmer	ef2102420b	Added NEMA8 and NEMA8BH stepper motors. Steppers can now have dual shafts, hollow shafts and black end caps.	2021-08-31 22:43:37 +01:00
Chris Palmer	540f841163	Added crude representation of JST ZH connectors.	2021-08-31 22:25:31 +01:00
Chris Palmer	1045502efb	Added more aluminium sheet thickness	2021-08-31 22:12:30 +01:00
Chris Palmer	485184f092	Added HGH15CA and HGH20CA rails.	2021-08-31 22:04:12 +01:00
Chris Palmer	b893c9069a	Added SFU1610 ballscrew nut	2021-08-31 21:56:20 +01:00
Chris Palmer	69f4ced29d	Added M8_cs_cap_screw, M5_grub_screw and M6_grub_screw. Fixed M6_cs_cap_screw and M4_grub_screw socket sizes.	2021-08-31 21:50:43 +01:00
Chris Palmer	5c1aa849fe	New layout for big picture.	2021-08-31 21:34:28 +01:00
Martin Budden	9d65f69bf3	Added M2p5_dome_screw.	2021-08-31 20:05:47 +01:00
Chris Palmer	515b99fdc0	Merge branch 'martinbudden-rpi_pico'	2021-08-27 16:18:22 +01:00
Chris Palmer	631d052c68	Updated changelog	2021-08-27 16:18:04 +01:00