Updated images and readme.

Steppers can now have dual shafts, hollow shafts and black end caps.

CHANGELOG.md

@@ -3,6 +3,173 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
 
 
+### [v15.23.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.23.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.22.0...v15.23.0 "diff with v15.22.0")
+*   2021-08-31 [`00c5c90`](https://github.com/nophead/NopSCADlib/commit/00c5c90a5e74f47f0e6f5e3a7996f70fa34f0833 "show commit") [C.P.](# "Chris Palmer") Updated big picture
+
+*   2021-08-31 [`01c26d8`](https://github.com/nophead/NopSCADlib/commit/01c26d8a349e802738a8b0d06575a3e6915bf070 "show commit") [C.P.](# "Chris Palmer") Added Lichuan servo motors contributed by Niclas Hedhman.
+
+*   2021-08-31 [`ef21024`](https://github.com/nophead/NopSCADlib/commit/ef2102420b15e5be4008a6a3cecf5416857265f9 "show commit") [C.P.](# "Chris Palmer") Added NEMA8 and NEMA8BH stepper motors.
+Steppers can now have dual shafts, hollow shafts and black end caps.
+
+*   2021-08-31 [`540f841`](https://github.com/nophead/NopSCADlib/commit/540f84116355e7f44a9b5796816d1e3422128ff3 "show commit") [C.P.](# "Chris Palmer") Added crude representation of JST ZH connectors.
+
+*   2021-08-31 [`1045502`](https://github.com/nophead/NopSCADlib/commit/1045502efb1cb94fb7bcc11fd4483b425a880926 "show commit") [C.P.](# "Chris Palmer") Added more aluminium sheet thickness
+
+*   2021-08-31 [`485184f`](https://github.com/nophead/NopSCADlib/commit/485184f09213ff0b191d5c8339471cd24ba3cc90 "show commit") [C.P.](# "Chris Palmer") Added HGH15CA and HGH20CA rails.
+
+*   2021-08-31 [`b893c90`](https://github.com/nophead/NopSCADlib/commit/b893c9069a6bae762733cf1e139d49bab28ad792 "show commit") [C.P.](# "Chris Palmer") Added SFU1610 ballscrew nut
+
+*   2021-08-31 [`69f4ced`](https://github.com/nophead/NopSCADlib/commit/69f4ced29da7e37c88ca24b924c6430144eec849 "show commit") [C.P.](# "Chris Palmer") Added `M8_cs_cap_screw,` `M5_grub_screw` and `M6_grub_screw`.
+Fixed `M6_cs_cap_screw` and `M4_grub_screw` socket sizes.
+
+*   2021-08-31 [`5c1aa84`](https://github.com/nophead/NopSCADlib/commit/5c1aa849fe5992617c3128c47dfc969504cbfd2f "show commit") [C.P.](# "Chris Palmer") New layout for big picture.
+
+### [v15.22.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.22.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.21.1...v15.22.0 "diff with v15.21.1")
+*   2021-08-27 [`1247303`](https://github.com/nophead/NopSCADlib/commit/1247303cb9dc2694994993b5dc046683becb7fde "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2021-08-13 [`14ab1bb`](https://github.com/nophead/NopSCADlib/commit/14ab1bb8b614055e0bf4ad33799276b0017ca13e "show commit") [M.B.](# "Martin Budden") Added Raspberry Pi Pico.
+
+#### [v15.21.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.21.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.21.0...v15.21.1 "diff with v15.21.0")
+*   2021-08-09 [`be53547`](https://github.com/nophead/NopSCADlib/commit/be53547728834d8e786ad4cb5637c768320a3105 "show commit") [M.B.](# "Martin Budden") Fixed display of BLDC prop shaft when thread length `=` 0.
+
+*   2021-07-04 [`ba7d7d3`](https://github.com/nophead/NopSCADlib/commit/ba7d7d32adf554d163143c0ae1707565340bb35b "show commit") [C.P.](# "Chris Palmer") Updated chnagelog.
+
+### [v15.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.20.0...v15.21.0 "diff with v15.20.0")
+*   2021-07-01 [`df35e14`](https://github.com/nophead/NopSCADlib/commit/df35e14fc71794c3826d6c99ce3cab93a4cfa5fe "show commit") [M.B.](# "Martin Budden") Improved handling of pcb plating colour.
+
+### [v15.20.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.20.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.19.3...v15.20.0 "diff with v15.19.3")
+*   2021-06-29 [`c982876`](https://github.com/nophead/NopSCADlib/commit/c982876ebc0f95b466de1af3c80642dfd88800e6 "show commit") [C.P.](# "Chris Palmer") Can now specify the screw used for PSU shrouds and get the wall thickness.
+
+#### [v15.19.3](https://github.com/nophead/NopSCADlib/releases/tag/v15.19.3 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.19.2...v15.19.3 "diff with v15.19.2")
+*   2021-06-17 [`92d0444`](https://github.com/nophead/NopSCADlib/commit/92d0444e5f96c8f4768afb3d014044d7e66c6e69 "show commit") [C.P.](# "Chris Palmer") Changelog now runs codespell to fix the spellings in the commit comments.
+
+#### [v15.19.2](https://github.com/nophead/NopSCADlib/releases/tag/v15.19.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.19.1...v15.19.2 "diff with v15.19.1")
+*   2021-06-15 [`8d7c44b`](https://github.com/nophead/NopSCADlib/commit/8d7c44b80deffcc8c6b84c7a6485c959826cb381 "show commit") [M.B.](# "Martin Budden") Spelling corrections.
+
+#### [v15.19.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.19.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.19.0...v15.19.1 "diff with v15.19.0")
+*   2021-06-17 [`d38055c`](https://github.com/nophead/NopSCADlib/commit/d38055c15c8b00f91f9c5a4749264acc9b123aad "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-06-11 [`dcfe426`](https://github.com/nophead/NopSCADlib/commit/dcfe4262c519fb750702564309b790cda5b1c090 "show commit") [M.B.](# "Martin Budden") Fixed typos.
+
+### [v15.19.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.19.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.18.0...v15.19.0 "diff with v15.18.0")
+*   2021-06-17 [`c7a6d81`](https://github.com/nophead/NopSCADlib/commit/c7a6d8164f545e83c4d871080ac63b7d903829df "show commit") [C.P.](# "Chris Palmer") Added `molex_usb_Ax1()` and now shows SMT caps in the PCB test.
+
+### [v15.18.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.18.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.17.1...v15.18.0 "diff with v15.17.1")
+*   2021-06-08 [`d1a17bd`](https://github.com/nophead/NopSCADlib/commit/d1a17bd4ac90a7d3d6de7c4d4d032e8198c48647 "show commit") [C.P.](# "Chris Palmer") Added LIPO fuel gauge PCB.
+
+*   2021-06-08 [`b8efa11`](https://github.com/nophead/NopSCADlib/commit/b8efa11fd9504f4b837be663190d238c6227941e "show commit") [C.P.](# "Chris Palmer") Added SMD capacitors.
+
+*   2021-06-07 [`3bc8f35`](https://github.com/nophead/NopSCADlib/commit/3bc8f35e37741ef12d45951546059902b472b34a "show commit") [C.P.](# "Chris Palmer") Can now put `jst_ph` connectors on PCBs
+
+*   2021-06-07 [`39c11ef`](https://github.com/nophead/NopSCADlib/commit/39c11ef3b209256be393b3b211fef72c8ac793a1 "show commit") [C.P.](# "Chris Palmer") Added 2p54joiner to represent cropped headers joining PCBs.
+
+*   2021-06-07 [`5a8a1da`](https://github.com/nophead/NopSCADlib/commit/5a8a1da8801e3d799b7e322b397b236685552f97 "show commit") [C.P.](# "Chris Palmer") Added Seeeduino XIAO.
+Tiny PCBs now shown in a third line.
+
+*   2021-06-07 [`3147862`](https://github.com/nophead/NopSCADlib/commit/3147862212d6d1277a5e164909e4004e3e321f10 "show commit") [C.P.](# "Chris Palmer") PCB lands can be rounded and can specify colour.
+Holes can be positioned on the edge to make surface mountable connections.
+
+#### [v15.17.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.17.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.17.0...v15.17.1 "diff with v15.17.0")
+*   2021-06-07 [`4fc8a7f`](https://github.com/nophead/NopSCADlib/commit/4fc8a7f47df9a880b8e02c9e0f1a3a63d9939c3e "show commit") [C.P.](# "Chris Palmer") Fixed z-fighting between transparent LEDs and PCB.
+
+### [v15.17.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.17.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.16.2...v15.17.0 "diff with v15.16.2")
+*   2021-06-06 [`a9ed994`](https://github.com/nophead/NopSCADlib/commit/a9ed9944c328d1fa5121ae10e4e0243bda45f001 "show commit") [C.P.](# "Chris Palmer") Added PERF70x51.
+
+*   2021-06-06 [`9cd2dbc`](https://github.com/nophead/NopSCADlib/commit/9cd2dbc3167c1d14ac1f72e5676f4154151b5638 "show commit") [C.P.](# "Chris Palmer") Added copper colour constant.
+Copper PCB pads and veroboard tracks now use copper colour.
+
+#### [v15.16.2](https://github.com/nophead/NopSCADlib/releases/tag/v15.16.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.16.1...v15.16.2 "diff with v15.16.1")
+*   2021-06-06 [`f3bfbbf`](https://github.com/nophead/NopSCADlib/commit/f3bfbbfcf21209fd993aa7ebc25c8d8d3c12fbd5 "show commit") [C.P.](# "Chris Palmer") Fixed Python error when top level assembly is empty.
+
+*   2021-06-06 [`baaa85f`](https://github.com/nophead/NopSCADlib/commit/baaa85ffedb1a7cdca42e01ca8f2e257438070fc "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-06-06 [`f1a49d4`](https://github.com/nophead/NopSCADlib/commit/f1a49d4e28bf063950b113c64acaa918d470767f "show commit") [C.P.](# "Chris Palmer") Better description of `pcb_grid()`.
+
+#### [v15.16.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.16.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.16.0...v15.16.1 "diff with v15.16.0")
+*   2021-06-04 [`9a4cc7e`](https://github.com/nophead/NopSCADlib/commit/9a4cc7ec42bf440e24ad3dacd88d7055736ae793 "show commit") [C.P.](# "Chris Palmer") Ziptie BOM entries no longer segregated by radius wrapped around.
+
+### [v15.16.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.16.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.15.0...v15.16.0 "diff with v15.15.0")
+*   2021-06-04 [`a782d43`](https://github.com/nophead/NopSCADlib/commit/a782d43e67f4091f44bd9018817e7263e2944477 "show commit") [C.P.](# "Chris Palmer") `bom.py` now generates `bom.csv` to allow costed BOMs to be made using a spreadsheet.
+
+### [v15.15.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.15.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.14.2...v15.15.0 "diff with v15.14.2")
+*   2021-06-03 [`823f3b9`](https://github.com/nophead/NopSCADlib/commit/823f3b936e6c33897445d3f3272b69237f013537 "show commit") [C.P.](# "Chris Palmer") Add the ability to have a target specific top level module in place of `main_assembly()`.
+
+#### [v15.14.2](https://github.com/nophead/NopSCADlib/releases/tag/v15.14.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.14.1...v15.14.2 "diff with v15.14.1")
+*   2021-06-02 [`749a1f0`](https://github.com/nophead/NopSCADlib/commit/749a1f0648196bd0ae47dbe93ac1b5e3a06d78cd "show commit") [C.P.](# "Chris Palmer") Fixed male thread z-fighting bug.
+
+*   2021-06-01 [`5c898df`](https://github.com/nophead/NopSCADlib/commit/5c898df2172a7e202c9e3d8c6641a0aaf95e5d48 "show commit") [C.P.](# "Chris Palmer") More readable code in `rounded_polygon`.
+
+#### [v15.14.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.14.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.14.0...v15.14.1 "diff with v15.14.0")
+*   2021-06-01 [`20d799a`](https://github.com/nophead/NopSCADlib/commit/20d799a3c115d3d32f101c4419d6e9b57c3be8c7 "show commit") [C.P.](# "Chris Palmer") `IEC_320_C14_switched_fused_inlet` now shows the correct object name in the example.
+
+### [v15.14.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.14.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.13.4...v15.14.0 "diff with v15.13.4")
+*   2021-05-31 [`2581098`](https://github.com/nophead/NopSCADlib/commit/258109811b7b7f71895340dc4b86b96d7dbc2037 "show commit") [C.P.](# "Chris Palmer") Added uppercase version of `BLCD_motors.scad`.
+
+*   2021-05-31 [`b39fd53`](https://github.com/nophead/NopSCADlib/commit/b39fd536c2841a95ab50b8a196e21ee8fc5976d1 "show commit") [C.P.](# "Chris Palmer") Removed lower case version of `bldc_motors.scad`.
+
+*   2021-05-31 [`a5a87d2`](https://github.com/nophead/NopSCADlib/commit/a5a87d260dd4bbe40a8727a4099207271918d02b "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2021-05-30 [`00ca412`](https://github.com/nophead/NopSCADlib/commit/00ca412441c85ea1fd7082453c823445fbbdce4e "show commit") [M.B.](# "Martin Budden") Added BLDC3548 motor.
+
+*   2021-05-30 [`1e6d7f5`](https://github.com/nophead/NopSCADlib/commit/1e6d7f5dd68e64181aef019bb8bca186abb2ac68 "show commit") [M.B.](# "Martin Budden") Brushless DC motors.
+
+#### [v15.13.4](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.4 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.3...v15.13.4 "diff with v15.13.3")
+*   2021-05-30 [`ec07d95`](https://github.com/nophead/NopSCADlib/commit/ec07d95657d52aab375b3b2acb95c87b369d2194 "show commit") [M.B.](# "Martin Budden") Added assertion to check colour format in module thread.
+
+#### [v15.13.3](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.3 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.2...v15.13.3 "diff with v15.13.2")
+*   2021-05-19 [`0dab0dc`](https://github.com/nophead/NopSCADlib/commit/0dab0dca08485d1717ee516a61831fcd6963e335 "show commit") [C.P.](# "Chris Palmer") Added missing includes `core.scad` which generates warnings with latest OpenSCAD snapshots.
+
+ * Note, however, NopSCADlib does not work with the current OpenSCAD snapshot.
+
+#### [v15.13.2](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.1...v15.13.2 "diff with v15.13.1")
+*   2021-05-15 [`9689683`](https://github.com/nophead/NopSCADlib/commit/9689683b7efbde882c057a903dd7fa018107d029 "show commit") [M.B.](# "Martin Budden") Typo in `global_defs`.
+
+#### [v15.13.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.13.0...v15.13.1 "diff with v15.13.0")
+*   2021-05-18 [`11ebe22`](https://github.com/nophead/NopSCADlib/commit/11ebe2225db09bdd45089e4ebf5c1037243bf45c "show commit") [C.P.](# "Chris Palmer") Removed spurious convexity in difference from `rounded_polygon()`.
+
+### [v15.13.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.13.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.12.0...v15.13.0 "diff with v15.12.0")
+*   2021-05-02 [`3401919`](https://github.com/nophead/NopSCADlib/commit/34019196cdac6b08e57d773e138a22394b609ea5 "show commit") [C.P.](# "Chris Palmer") Updated readme
+
+*   2021-05-02 [`436fc71`](https://github.com/nophead/NopSCADlib/commit/436fc71cf319c1e71b6cbd240b76d7cad5ecd8ba "show commit") [M.B.](# "Martin Budden") Added `blower_size` function.
+
+### [v15.12.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.12.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.11.1...v15.12.0 "diff with v15.11.1")
+*   2021-04-26 [`e2feceb`](https://github.com/nophead/NopSCADlib/commit/e2feceb608b4491424c0e4c1e7c191f7d8aeceec "show commit") [C.P.](# "Chris Palmer") Updated readme
+
+*   2021-04-25 [`9c1a9bf`](https://github.com/nophead/NopSCADlib/commit/9c1a9bf3572c07a57b5bd1fde1d9a4aba14e5ea8 "show commit") [M.B.](# "Martin Budden") Add facility to orient `core_xy` with left motor being lower or upper motor.
+
+#### [v15.11.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.11.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.11.0...v15.11.1 "diff with v15.11.0")
+*   2021-04-25 [`feec1e7`](https://github.com/nophead/NopSCADlib/commit/feec1e7ae5a5217586e0ab9e7b002e8af8f7c749 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-04-25 [`be76af2`](https://github.com/nophead/NopSCADlib/commit/be76af2fc490e10e4dd115a56019e33005f87db9 "show commit") [M.B.](# "Martin Budden") Fixed typo in `leadnut.scad`.
+
+### [v15.11.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.11.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.10.1...v15.11.0 "diff with v15.10.1")
+*   2021-04-25 [`49fdfea`](https://github.com/nophead/NopSCADlib/commit/49fdfea7926d677b6e0a9eee2fbd928f2935e1eb "show commit") [C.P.](# "Chris Palmer") Added 35BYGHJ75 geared stepper.
+
+#### [v15.10.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.10.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.10.0...v15.10.1 "diff with v15.10.0")
+*   2021-04-25 [`ac0bacf`](https://github.com/nophead/NopSCADlib/commit/ac0bacfeda43af62256e7bd3184df695b3e01d37 "show commit") [C.P.](# "Chris Palmer") Removed echo in rails test.
+
+### [v15.10.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.10.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.9.0...v15.10.0 "diff with v15.9.0")
+*   2021-04-13 [`e379fa8`](https://github.com/nophead/NopSCADlib/commit/e379fa8ada4a4089fc24ce5fc2c140a2531e2e95 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-04-13 [`5fbff06`](https://github.com/nophead/NopSCADlib/commit/5fbff060b019a983eba93eb8c5b16adfb6a3f7ee "show commit") [M.B.](# "Martin Budden") Added a `pcb_component` function.
+
+### [v15.9.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.9.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.8.0...v15.9.0 "diff with v15.8.0")
+*   2021-04-13 [`edc0b86`](https://github.com/nophead/NopSCADlib/commit/edc0b86bb1cd52e90fe353c4aea9539e95aa5aee "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2021-03-31 [`b70c2f9`](https://github.com/nophead/NopSCADlib/commit/b70c2f993c351bf71da57cfc169ed02a235cf4f3 "show commit") [M.B.](# "Martin Budden") Added box sections.
+
+### [v15.8.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.8.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.7.0...v15.8.0 "diff with v15.7.0")
+*   2021-04-12 [`145c5d9`](https://github.com/nophead/NopSCADlib/commit/145c5d9b1a7c873940abf266a321edabdff3b7a0 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2021-04-12 [`1efed64`](https://github.com/nophead/NopSCADlib/commit/1efed649cf54607b9d39d4b7f422dd385ccb441f "show commit") [M.B.](# "Martin Budden") Added PSU size function.
+
+### [v15.7.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.7.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.6.1...v15.7.0 "diff with v15.6.1")
+*   2021-04-12 [`3f31607`](https://github.com/nophead/NopSCADlib/commit/3f31607840d162f63d12eb2317d2f28af1ecf492 "show commit") [C.P.](# "Chris Palmer") Added No8 screws.
+
+#### [v15.6.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.6.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.6.0...v15.6.1 "diff with v15.6.0")
+*   2021-04-05 [`f12b36e`](https://github.com/nophead/NopSCADlib/commit/f12b36ea046b5a784dd81b3c4e95eaf4cf24a58d "show commit") [C.P.](# "Chris Palmer") Corrected MGN12 rail end value.
+Added assert for rail end value too big.
+
 ### [v15.6.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.6.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.5.0...v15.6.0 "diff with v15.5.0")
 *   2021-04-03 [`51cc2fd`](https://github.com/nophead/NopSCADlib/commit/51cc2fd6791065e1c94c761abf7dac0271e6ab28 "show commit") [C.P.](# "Chris Palmer") Carriages now appear on the BOM and both variants are shown in the rail test.
 
@@ -68,7 +235,7 @@ Breaking change in `belt_length();` now requires a type argument
 
 ## [v14.0.0](https://github.com/nophead/NopSCADlib/releases/tag/v14.0.0 "show release") Breaking Changes [...](https://github.com/nophead/NopSCADlib/compare/v13.5.0...v14.0.0 "diff with v13.5.0")
 *   2021-03-06 [`298d1f9`](https://github.com/nophead/NopSCADlib/commit/298d1f92841f30e13b437c6770fc113954b94108 "show commit") [C.P.](# "Chris Palmer") Interface is the same but filenames to be included or used changed.
-Changlog upated.
+Changelog updated.
 
 *   2021-03-06 [`491c3b4`](https://github.com/nophead/NopSCADlib/commit/491c3b4ea8d2ef51e55fd389f0dc0b9a6b9bd9a4 "show commit") [C.P.](# "Chris Palmer") Updated readme, `lib.scad` and image.
 
@@ -104,7 +271,7 @@ Changlog upated.
 
 *   2021-03-03 [`614e5f3`](https://github.com/nophead/NopSCADlib/commit/614e5f3a72db309a3dee996d7241317556883e8d "show commit") [C.P.](# "Chris Palmer") Issues in the changelog now link to to the issue.
 
-*   2021-03-03 [`a7eae4f`](https://github.com/nophead/NopSCADlib/commit/a7eae4f549b51dbe4624a8b67012919cef6cb24a "show commit") [C.P.](# "Chris Palmer") Neater changlog format.
+*   2021-03-03 [`a7eae4f`](https://github.com/nophead/NopSCADlib/commit/a7eae4f549b51dbe4624a8b67012919cef6cb24a "show commit") [C.P.](# "Chris Palmer") Neater changelog format.
 
 *   2021-03-03 [`31ab856`](https://github.com/nophead/NopSCADlib/commit/31ab8562a783464f93812b8c7c45d403587efd0a "show commit") [C.P.](# "Chris Palmer") Updated images
 
@@ -127,7 +294,7 @@ Changlog upated.
 *   2021-02-20 [`03a0c2f`](https://github.com/nophead/NopSCADlib/commit/03a0c2fe981ce12cda51a693f69b4fb19696cb8a "show commit") [C.P.](# "Chris Palmer") Fixed typo.
 
 ### [v13.3.0](https://github.com/nophead/NopSCADlib/releases/tag/v13.3.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v13.2.0...v13.3.0 "diff with v13.2.0")
-*   2021-02-20 [`7c2df8d`](https://github.com/nophead/NopSCADlib/commit/7c2df8d36d214a8bf8ebdcd39da293209bc175ab "show commit") [C.P.](# "Chris Palmer") The pose module can now specify the camera distance supressing viewall and
+*   2021-02-20 [`7c2df8d`](https://github.com/nophead/NopSCADlib/commit/7c2df8d36d214a8bf8ebdcd39da293209bc175ab "show commit") [C.P.](# "Chris Palmer") The pose module can now specify the camera distance suppressing viewall and
 autocentre.
 
 ### [v13.2.0](https://github.com/nophead/NopSCADlib/releases/tag/v13.2.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v13.1.0...v13.2.0 "diff with v13.1.0")
@@ -422,9 +589,9 @@ Updated pics and readme.
 *   2020-12-28 [`ba586b3`](https://github.com/nophead/NopSCADlib/commit/ba586b368582db163af143ebb60afed270f77b1c "show commit") [C.P.](# "Chris Palmer") Example images update to match new contersink screws and teardrops.
 
 ### [v10.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v10.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v10.20.1...v10.21.0 "diff with v10.20.1")
-*   2020-12-28 [`8d22940`](https://github.com/nophead/NopSCADlib/commit/8d22940506df525ac52ef6f8a00ea03661f3b682 "show commit") [C.P.](# "Chris Palmer") Project blurb can now be split with into sections with markdown horizonal rules
+*   2020-12-28 [`8d22940`](https://github.com/nophead/NopSCADlib/commit/8d22940506df525ac52ef6f8a00ea03661f3b682 "show commit") [C.P.](# "Chris Palmer") Project blurb can now be split with into sections with markdown horizontal rules
 made with asterisks.
-If an image is include in the first section the default image is supressed.
+If an image is include in the first section the default image is suppressed.
 
 #### [v10.20.1](https://github.com/nophead/NopSCADlib/releases/tag/v10.20.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v10.20.0...v10.20.1 "diff with v10.20.0")
 *   2020-12-26 [`87c8bbb`](https://github.com/nophead/NopSCADlib/commit/87c8bbb9a549aabb84004426332dc964583472c5 "show commit") [M.B.](# "Martin Budden") Fixed error in `carriage_size` function.
@@ -439,12 +606,12 @@ If an image is include in the first section the default image is supressed.
 
 ### [v10.20.0](https://github.com/nophead/NopSCADlib/releases/tag/v10.20.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v10.19.0...v10.20.0 "diff with v10.19.0")
 *   2020-12-24 [`6f8ff60`](https://github.com/nophead/NopSCADlib/commit/6f8ff606fa5b2ef7d81fb687b77bd6236f6d277f "show commit") [C.P.](# "Chris Palmer") Removed `woven_sheet()` from the readme.
-Removed redundent code.
+Removed redundant code.
 
 *   2020-12-24 [`acd5de0`](https://github.com/nophead/NopSCADlib/commit/acd5de0fbd513b67387478b4c89a5ef4f11b440b "show commit") [C.P.](# "Chris Palmer") Fixed extra BOM entries for woven sheet.
 Added render colour to BOM for 3D sheets.
 
-*   2020-12-23 [`cc1e3ba`](https://github.com/nophead/NopSCADlib/commit/cc1e3baaf6ba7451b3545efc949015af822dc95c "show commit") [C.P.](# "Chris Palmer") Reimplemeted woven sheets with an eye to speed and interface consistancy.
+*   2020-12-23 [`cc1e3ba`](https://github.com/nophead/NopSCADlib/commit/cc1e3baaf6ba7451b3545efc949015af822dc95c "show commit") [C.P.](# "Chris Palmer") Reimplemeted woven sheets with an eye to speed and interface consistency.
 
 *   2020-12-13 [`85cb54e`](https://github.com/nophead/NopSCADlib/commit/85cb54ef318597a4922077785247ddcb08d5e00d "show commit") [M.B.](# "Martin Budden") Added sheet with checkerboard texture to simulate carbon fiber.
 
@@ -909,7 +1076,7 @@ Done to reduced the number of global constants.
 `Panel_meters` can now have inner apertures and buttons.
 
 ### [v7.2.0](https://github.com/nophead/NopSCADlib/releases/tag/v7.2.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v7.1.1...v7.2.0 "diff with v7.1.1")
-*   2020-05-02 [`baa737c`](https://github.com/nophead/NopSCADlib/commit/baa737c4d83be0ab38685122ebe535872fe63e20 "show commit") [C.P.](# "Chris Palmer") Updated example to use Foot contructor.
+*   2020-05-02 [`baa737c`](https://github.com/nophead/NopSCADlib/commit/baa737c4d83be0ab38685122ebe535872fe63e20 "show commit") [C.P.](# "Chris Palmer") Updated example to use Foot constructor.
 
 *   2020-05-02 [`70b13d2`](https://github.com/nophead/NopSCADlib/commit/70b13d2f2723caa18a69afb7a179d88366c82c51 "show commit") [C.P.](# "Chris Palmer") Added functions to create property lists that are created by the client.
 Foot, box, bbox, pbox, `flat_hinge` and `strap_handle`.
@@ -1113,7 +1280,7 @@ The implementation files are still lower case for backwards compatibility.
 
 *   2020-03-03 [`bd60b50`](https://github.com/nophead/NopSCADlib/commit/bd60b50b099d76f6588ddfe900be276ed7d0cf98 "show commit") [C.P.](# "Chris Palmer") Removed lower case tests
 
-*   2020-03-03 [`4d51cb7`](https://github.com/nophead/NopSCADlib/commit/4d51cb73f3d2b3a92ac4c12a2002bc4918228969 "show commit") [C.P.](# "Chris Palmer") Table of contents now has three vitamin coloumns
+*   2020-03-03 [`4d51cb7`](https://github.com/nophead/NopSCADlib/commit/4d51cb73f3d2b3a92ac4c12a2002bc4918228969 "show commit") [C.P.](# "Chris Palmer") Table of contents now has three vitamin columns
 
 *   2020-03-02 [`3b77c97`](https://github.com/nophead/NopSCADlib/commit/3b77c975325851caf5e602ae6ceaa8e5d9126425 "show commit") [C.P.](# "Chris Palmer") Example now include `core.scad` instead of `lib.scad`.
 
@@ -1390,7 +1557,7 @@ This means 5mm, 6mm etc comes before 10mm in BOM.
 
 *   2020-01-11 [`d1324a6`](https://github.com/nophead/NopSCADlib/commit/d1324a670eb7ec898e6663dc9394fc1bd19ef664 "show commit") [M.B.](# "Martin Budden") Added JST-XH connector for pcbs.
 
-*   2020-02-22 [`599fbba`](https://github.com/nophead/NopSCADlib/commit/599fbba6c2b036a4a22fa04f2e06f67ef5bb9578 "show commit") [C.P.](# "Chris Palmer") Reduced dependecies in `pcb_mount` test.
+*   2020-02-22 [`599fbba`](https://github.com/nophead/NopSCADlib/commit/599fbba6c2b036a4a22fa04f2e06f67ef5bb9578 "show commit") [C.P.](# "Chris Palmer") Reduced dependencies in `pcb_mount` test.
 
 ### [v2.19.0](https://github.com/nophead/NopSCADlib/releases/tag/v2.19.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v2.16.0...v2.19.0 "diff with v2.16.0")
 *   2020-02-22 [`6097e07`](https://github.com/nophead/NopSCADlib/commit/6097e0709498166c61712094fcc11f083e25959f "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
@@ -1706,7 +1873,7 @@ IEC screw length fixed at 10 if inserts used.
 *   2019-06-14 [`a51e96e`](https://github.com/nophead/NopSCADlib/commit/a51e96ec433c6d347e0d313573585cda9978e7b4 "show commit") [C.P.](# "Chris Palmer") Nuts now show their thickness on the BOM so half nuts have a different description.
 
 ## [v1.0.0](https://github.com/nophead/NopSCADlib/releases/tag/v1.0.0 "show release") Breaking Changes [...](https://github.com/nophead/NopSCADlib/compare/v0.0.1...v1.0.0 "diff with v0.0.1")
-*   2019-06-14 [`b719601`](https://github.com/nophead/NopSCADlib/commit/b719601a645d899f5477c13a34f857d178bcc3a1 "show commit") [C.P.](# "Chris Palmer") Fixed cable strip parameters and BOM desciption
+*   2019-06-14 [`b719601`](https://github.com/nophead/NopSCADlib/commit/b719601a645d899f5477c13a34f857d178bcc3a1 "show commit") [C.P.](# "Chris Palmer") Fixed cable strip parameters and BOM description
 
 #### [v0.0.1](https://github.com/nophead/NopSCADlib/releases/tag/v0.0.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v0.0.0...v0.0.1 "diff with v0.0.0")
 *   2019-06-14 [`5ede2d0`](https://github.com/nophead/NopSCADlib/commit/5ede2d0895a8a813ef2bc47bf94462d668bc440b "show commit") [C.P.](# "Chris Palmer") Smooth pulleys now show their OD on the BOM.

docs/usage.md

@@ -270,6 +270,22 @@ The target config file is selected by generating `target.scad` that includes `co
 The rest of the project includes `target.scad` to use the configuration.
 Additionally all the generated file directories (assemblies, bom, stls, dxfs, etc.) are placed in a sub-directory called `<target_name>`.
 
+The build system will look for a `<target_name>_assembly` module and use it as the top level module instead of `main_assembly` if it it exists.
+That allows the project description to be target specific if the top level modules are in different scad files.
+The top level assembly instructions and assembly contents could also be different if appropriate.
+
+If the top level module is just a shell wrapper that simply includes one other assembly, with no additional parts, then it is removed from the build instructions and
+the assembly it calls becomes the top level. This allows a different project description for each target but only one set of top level instructions without repeating them.
+
+### Costed BOMs
+
+A costed bill of materials can be made by opening the generated file `bom/bom.csv` in a spreadsheet program using a single quote as the string delimiter and comma as the field separator.
+That gets a list of part descriptions and quantities to which prices can be added to get the total cost and perhaps a URL of where to buy each part.
+
+If a Python file called `parts.py` is found then `bom.py` will attempt to call functions for each part to get a price and URL.
+Any functions not found are printed, so you can see the format expected.
+The function are passed the quantity to allow them to calculate volume discounts, etc.
+
 ### Other libraries
 
 The build scripts need to be able to locate the source files where the modules to generate the STL files and assemblies reside. They will search all the scad files

examples/MainsBreakOutBox/bom/bom.csv

@@ -0,0 +1,16 @@
+'Ferrule for 1.5mm^2 wire - not shown',  3
+'Wire blue 30/0.25mm strands, length 150mm - not shown',  2
+'Wire brown 30/0.25mm strands, length 150mm - not shown',  2
+'Wire green & yellow 30/0.25mm strands, length 150mm - not shown',  2
+'IEC inlet for ATX',  1
+'Heatfit insert M3',  2
+'4mm shielded jack socket blue',  2
+'4mm shielded jack socket brown',  1
+'4mm shielded jack socket green',  2
+'Mains socket 13A',  1
+'Nut M3 x 2.4mm nyloc',  6
+'Screw M3 cs cap x 12mm',  2
+'Screw M3 cs cap x 20mm',  2
+'Screw M3 dome x 10mm',  4
+'Heatshrink sleeving ID 3.2mm x 15mm - not shown',  8
+'Washer  M3 x 7mm x 0.5mm', 10

global_defs.scad

@@ -27,15 +27,16 @@
 //  Setting $_bom in the local file overrides it in the local file but not in the libs.
 //
 rr_green = [0, 146/255, 0];                                               // RepRap logo colour
+crimson  = [220/255, 20/255, 60/255];
 
 $_bom           = is_undef($bom)             ? 0      : $bom;             // 0 no bom, 1 assemblies and stls, 2 vitamins as well
 $exploded       = is_undef($explode)         ? 0      : $explode;         // 1 for exploded view
-layer_height    = is_undef($layer_height)    ? 0.25   : $layer_height;    // layer heigth when printing
+layer_height    = is_undef($layer_height)    ? 0.25   : $layer_height;    // layer height when printing
 extrusion_width = is_undef($extrusion_width) ? 0.5    : $extrusion_width; // filament width when printing
 nozzle          = is_undef($nozzle)          ? 0.45   : $nozzle;          // 3D printer nozzle
 cnc_bit_r       = is_undef($cnc_bit_r)       ? 1.2    : $cnc_bit_r;       // minimum tool radius when milling 2D objects
 pp1_colour      = is_undef($pp1_colour)      ? rr_green : $pp1_colour;    // printed part colour 1, RepRap logo colour
-pp2_colour      = is_undef($pp2_colour)      ? "Crimson"  : $pp2_colour;  // printed part colour 2
+pp2_colour      = is_undef($pp2_colour)      ? crimson : $pp2_colour;     // printed part colour 2
 pp3_colour      = is_undef($pp3_colour)      ? "SteelBlue" : $pp3_colour; // printed part colour 3
 pp4_colour      = is_undef($pp4_colour)      ? "darkorange" : $pp4_colour;// printed part colour 4
 show_rays       = is_undef($show_rays)       ? false  : $show_rays;       // show camera sight lines and light direction
@@ -53,9 +54,10 @@ $fs = extrusion_width / 2;
 function round_to_layer(z) = ceil(z / layer_height) * layer_height;
 // Some additional named colours
 function grey(n) = [0.01, 0.01, 0.01] * n;                                          //! Generate a shade of grey to pass to color().
-gold                            = [255/255, 215/255, 0/255];
-brass                           = [255/255, 220/255, 100/255];
 silver                          = [0.75, 0.75, 0.75];
+gold                            = [255, 215,   0] / 255;
+brass                           = [255, 220, 100] / 255;
+copper                          = [230, 140,  51] / 255;
 
 /*
  * Enums

lib.scad

@@ -28,6 +28,8 @@ include <vitamins/pcbs.scad>
 include <vitamins/batteries.scad>
 include <vitamins/bearing_blocks.scad>
 include <vitamins/blowers.scad>
+include <vitamins/bldc_motors.scad>
+include <vitamins/box_sections.scad>
 include <vitamins/bulldogs.scad>
 include <vitamins/buttons.scad>
 include <vitamins/cameras.scad>
@@ -53,6 +55,7 @@ include <vitamins/pulleys.scad>
 include <vitamins/ring_terminals.scad>
 include <vitamins/rails.scad>
 include <vitamins/rod.scad>
+include <vitamins/servo_motors.scad>
 include <vitamins/shaft_couplings.scad>
 include <vitamins/sheets.scad>
 include <vitamins/sk_brackets.scad>

libtest.scad

@@ -45,7 +45,9 @@ use <tests/ball_bearings.scad>
 use <tests/batteries.scad>
 use <tests/bearing_blocks.scad>
 use <tests/belts.scad>
+use <tests/BLDC_motors.scad>
 use <tests/blowers.scad>
+use <tests/box_sections.scad>
 use <tests/bulldogs.scad>
 use <tests/buttons.scad>
 use <tests/cable_strips.scad>
@@ -90,6 +92,7 @@ use <tests/rockers.scad>
 use <tests/rod.scad>
 use <tests/screws.scad>
 use <tests/sealing_strip.scad>
+use <tests/servo_motors.scad>
 use <tests/shaft_couplings.scad>
 use <tests/sheets.scad>
 use <tests/SK_brackets.scad>
@@ -183,16 +186,15 @@ translate([x5, cable_grommets_y + 250])
 translate([950, 600])
     box_test();
 
-translate([830, 770])
+translate([900, 750])
     pocket_handles();
 
-translate([950, 750])
+translate([900, 850])
     printed_boxes();
 
-translate([850, 1330])
+translate([850, 1330 + 85])
     bbox_test();
 
-
 inserts_y = 0;
 nuts_y = inserts_y + 20;
 washers_y = nuts_y + 120;
@@ -204,10 +206,11 @@ sealing_strip_y = springs_y + 20;
 tubings_y = sealing_strip_y + 20;
 pillars_y = tubings_y + 20;
 ball_bearings_y = pillars_y + 40;
-pulleys_y = ball_bearings_y +40;
-hot_ends_y = pulleys_y + 60;
-linear_bearings_y = hot_ends_y + 50;
-sheets_y = linear_bearings_y + 90;
+pulleys_y = ball_bearings_y + 40;
+leadnuts_y = pulleys_y + 60;
+linear_bearings_y = leadnuts_y + 50;
+steppers_y = linear_bearings_y + 110;
+sheets_y = steppers_y + 55;
 pcbs_y = sheets_y + 60;
 displays_y = pcbs_y + 170;
 fans_y = displays_y + 80;
@@ -253,13 +256,16 @@ translate([x0, ball_bearings_y])
 translate([x0, pulleys_y])
     pulleys();
 
+translate([x0, leadnuts_y])
+    leadnuts();
+
 translate([x0, linear_bearings_y]) {
     linear_bearings();
     rods();
 }
 
-translate([x0 + 10, hot_ends_y])
-    hot_ends();
+translate([x0, steppers_y])
+    stepper_motors();
 
 translate([x0, sheets_y])
     sheets();
@@ -277,7 +283,7 @@ translate([x0, fans_y]) {
         fan_guards();
 }
 
-translate([x0, transformers_y])
+translate([760, fans_y])
     variacs();
 
 translate([x0, psus_y]) {
@@ -289,7 +295,6 @@ translate([x0, psus_y]) {
 zipties_y = 0;
 bulldogs_y = zipties_y + 30;
 swiss_clips_y = bulldogs_y + 35;
-leadnuts_y = swiss_clips_y + 50;
 
 translate([x1, zipties_y])
     zipties();
@@ -300,10 +305,6 @@ translate([x1, bulldogs_y])
 translate([x1, swiss_clips_y])
     swiss_clips();
 
-translate([x1, leadnuts_y])
-    leadnuts();
-
-
 leds_y = 0;
 carriers_y = leds_y + 40;
 magnets_y = carriers_y + 40;
@@ -360,18 +361,18 @@ iecs_y = d_connectors_y + 80;
 modules_y = iecs_y + 60;
 ssrs_y = modules_y + 80;
 blowers_y = ssrs_y + 60;
-batteries_y = blowers_y + 100;
-steppers_y = batteries_y + 55;
-panel_meters_y = steppers_y + 70;
+hot_ends_y = blowers_y + 100;
+batteries_y = hot_ends_y + 55;
+panel_meters_y = batteries_y + 70;
 extrusions_y = panel_meters_y + 80;
 
 translate([x3, veroboard_y])
     veroboard_test();
 
-translate([x3 + 70, veroboard_y + 30])
+translate([x3 + 60, veroboard_y + 20])
     geared_steppers();
 
-translate([x3 + 140, veroboard_y + 20])
+translate([x3 + 160, ssrs_y])
     pcb_mounts();
 
 translate([x3 + 170, veroboard_y + 16])
@@ -407,8 +408,8 @@ translate([x3, blowers_y])
 translate([x3, batteries_y])
     batteries();
 
-translate([x2, steppers_y])  // interloper
-    stepper_motors();
+translate([x3 + 10, hot_ends_y])
+    hot_ends();
 
 translate([x2, panel_meters_y])
     panel_meters();
@@ -416,7 +417,7 @@ translate([x2, panel_meters_y])
 translate([x2, extrusions_y])
     extrusions();
 
-translate([x3, transformers_y])
+translate([400, transformers_y])
     transformers();
 
 
@@ -424,15 +425,20 @@ belts_y = 0;
 rails_y = belts_y + 200;
 extrusion_brackets_y = rails_y + 250;
 sk_brackets_y = extrusion_brackets_y + 80;
-kp_pillow_blocks_y = sk_brackets_y + 50;
+kp_pillow_blocks_y = sk_brackets_y + 60;
 scs_bearing_blocks_y = kp_pillow_blocks_y + 60;
+cable_strip_y = sheets_y;
+box_sections_y = batteries_y;
+BLDC_y = steppers_y;
+
+translate([0, transformers_y])
+    servo_motors();
 
 translate([x4 + 200, belts_y + 58]) {
     belt_test();
 
     translate([0, 60])
         opengrab_test();
-
 }
 
 translate([x4 + 175, belts_y, -20])
@@ -441,7 +447,7 @@ translate([x4 + 175, belts_y, -20])
 translate([x4, rails_y + 130])
     rails();
 
-translate([770, fans_y + 50])
+translate([x4, cable_strip_y])
     cable_strips();
 
 translate([x4, kp_pillow_blocks_y])
@@ -453,12 +459,17 @@ translate([x4, sk_brackets_y])
 translate([x4, extrusion_brackets_y])
     extrusion_brackets();
 
-translate([x4 + 120, extrusion_brackets_y])
+translate([x1, swiss_clips_y + 50])
     shaft_couplings();
 
 translate([x4, scs_bearing_blocks_y])
     scs_bearing_blocks();
 
+translate([x4, BLDC_y])
+    bldc_motors();
+
+translate([x2, box_sections_y])
+    box_sections();
 
 translate([x6, 125])
     light_strips();

printed/butt_box.scad

@@ -54,7 +54,7 @@ function bbox(screw, sheets, base_sheet, top_sheet, span, size, name = "bbox", s
  [ screw, sheets, base_sheet, top_sheet, span, size.x, size.y, size.z, name, skip_blocks, star_washers ];
 
 function bbox_volume(type) = bbox_width(type) * bbox_depth(type) * bbox_height(type) / 1000000; //! Internal volume in litres
-function bbox_area(type) = let(w =  bbox_width(type), d = bbox_depth(type), h = bbox_height(type)) //! Internal surdface area in m^2
+function bbox_area(type) = let(w =  bbox_width(type), d = bbox_depth(type), h = bbox_height(type)) //! Internal surface area in m^2
     2 * (w * d + w * h + d * h) / 1000000;
 
 module bbox_shelf_blank(type) { //! 2D template for a shelf

printed/door_hinge.scad

@@ -45,7 +45,7 @@ function door_hinge_stat_screw() = stat_screw;              //! Screw use to fas
 function door_hinge_stat_width() = stat_width;              //! Width of the stationary part
 function door_hinge_stat_length() = stat_length;            //! Length of the stationary part
 
-module door_hinge_hole_positions(dir = 0) {                 //! Position chidren at the door hole positions
+module door_hinge_hole_positions(dir = 0) {                 //! Position children at the door hole positions
     hole_pitch = width - 10;
 
     for(side = [-1, 1])

printed/door_latch.scad

@@ -57,7 +57,7 @@ module door_latch_stl() { //! Generates the STL for the printed part
         }
 }
 
-module door_latch_assembly(sheet_thickness = 3) { //! The assembly for a specified sheet thickess
+module door_latch_assembly(sheet_thickness = 3) { //! The assembly for a specified sheet thickness
     washer = screw_washer(screw);
     nut = screw_nut(screw);
 

printed/drag_chain.scad

@@ -20,7 +20,7 @@
 //
 //! Parametric cable drag chain to limit the bend radius of a cable run.
 //!
-//! Each link has a maximum bend angle of 45°, so the mininium radius is proportional to the link length.
+//! Each link has a maximum bend angle of 45°, so the minimum radius is proportional to the link length.
 //!
 //! The travel property is how far it can move in each direction, i.e. half the maximum travel if the chain is mounted in the middle of the travel.
 //!

printed/fan_guard.scad

@@ -17,7 +17,7 @@
 // If not, see <https://www.gnu.org/licenses/>.
 
 //
-//! Pintable fan finger guard to match the specified fan. To be `include`d, not `use`d.
+//! Printable fan finger guard to match the specified fan. To be `include`d, not `use`d.
 //!
 //! The ring spacing as well as the number of spokes can be specified, if zero a gasket is generated instead of a guard.
 //

printed/flat_hinge.scad

@@ -40,7 +40,7 @@ function hinge_knuckles(type)    = type[6]; //! How many knuckles
 function hinge_screw(type)       = type[7]; //! Screw type to mount it
 function hinge_screws(type)      = type[8]; //! How many screws
 function hinge_clearance(type)   = type[9]; //! Clearance between knuckles
-function hinge_margin(type)      = type[10]; //! How far to keep the screws from the knuckes
+function hinge_margin(type)      = type[10]; //! How far to keep the screws from the knuckles
 
 function flat_hinge(name, size, pin_d, knuckle_d, knuckles, screw, screws, clearance, margin) = //! Construct the property list for a flat hinge.
  [name, size.x, size.y, size.z, pin_d, knuckle_d, knuckles, screw, screws, clearance, margin];
@@ -73,7 +73,7 @@ module hinge_male(type, female = false) {       //! The half with the stationary
     assert(kr > pr, "knuckle diameter must be bigger than the pin diameter");
 
     n = hinge_knuckles(type);
-    assert(n >= 3, "must be at least three knuckes");
+    assert(n >= 3, "must be at least three knuckles");
     mn = ceil(n / 2);                           // Male knuckles
     fn = floor(n / 2);                          // Female knuckles
     gap = hinge_clearance(type);

printed/psu_shroud.scad

@@ -41,6 +41,7 @@ overlap = 6;
 cable_tie_inset = wall + 4;
 
 function psu_shroud_extent(type) = 15 + wall;                                   //! How far it extends beyond the PSU to clear the connections
+function psu_shroud_wall(type) = wall;                                          //! The wall thickness
 function psu_shroud_depth(type) =                                               //! Outside depth of the shroud
     psu_left_bay(type) + overlap + psu_shroud_extent(type);
 
@@ -154,7 +155,7 @@ assembly(str("PSU_shroud_", name), ngb = true) {
             insert(insert);
 }
 
-module psu_shroud_fastened_assembly(type, cable_d, thickness, name, cables = 1) //! Assembly with screws in place
+module psu_shroud_fastened_assembly(type, cable_d, thickness, name, cables = 1, screw = screw) //! Assembly with screws in place
 {
     screw_length = screw_length(screw,thickness + counter_bore, 2, true);
 

readme.md

@@ -20,32 +20,32 @@ A list of changes classified as breaking, additions or fixes is maintained in [C
 
 ## Table of Contents<a name="top"/>
 <table><tr>
-<th align="left"> Vitamins A-I </th><th align="left"> Vitamins J-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
-<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
-<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
-<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
-<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
-<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
-<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
-<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<th align="left"> Vitamins A-H </th><th align="left"> Vitamins I-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
+<tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
+<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
+<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
+<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
+<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
+<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
+<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
+<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
 </table>
 
 ---
@@ -268,21 +268,21 @@ SCSnUU and SCSnLUU bearing blocks
 <a name="Belts"></a>
 ## Belts
 Models timing belt running in a path over toothed or smooth pulleys and calculates an accurate length.
-Only models 2D paths, belt may twist to support crossed belt core XY and other designes where the belt twists!
+Only models 2D paths, belt may twist to support crossed belt core XY and other designs where the belt twists!
 
 By default the path is a closed loop. An open loop can be specified by specifying `open=true`, and in that case the start and end points are not connected, leaving the loop open.
 
 To get a 180 degree twist of the loop, you can use the `twist` argument. `Twist` can be a single number, and in that case the belt will twist after
 the position with that number. Alternatively `twist` can be a list of boolean values with a boolean for each position; the belt will then twist after
 the position that have a `true` value in the `twist` list. If the path is specified with pulley/idler types, then you can use `auto_twist=true`; in
-that case the belt will automatically twist so the back of the belt always runs against idlers and the tooth side runs against pullies. If you use
+that case the belt will automatically twist so the back of the belt always runs against idlers and the tooth side runs against pulleys. If you use
 `open=true` then you might also use `start_twist=true` to let the belt start the part with the back side out.
 
-The path must be specified as a list of positions. Each position should be either a vector with `[x, y, pulley]` or `[x, y, r]`. A pully is a type from
+The path must be specified as a list of positions. Each position should be either a vector with `[x, y, pulley]` or `[x, y, r]`. A pulley is a type from
 `pulleys.scad`, and correct radius and angle will automatically be calculated. Alternatively a radius can be specified directly.
 
 To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
-Alternativley you can just specify smooth pulleys in the path, and it will then happen automatically.
+Alternatively you can just specify smooth pulleys in the path, and it will then happen automatically.
 
 Individual teeth are not drawn, instead they are represented by a lighter colour.
 
@@ -334,6 +334,73 @@ Individual teeth are not drawn, instead they are represented by a lighter colour
 |   6 | `screw(M3_grub_screw, 6)` |  Screw M3 grub x  6mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="BLDC_motors"></a>
+## BLDC_motors
+ Brushless DC electric motor
+
+[vitamins/bldc_motors.scad](vitamins/bldc_motors.scad) Object definitions.
+
+[vitamins/bldc_motor.scad](vitamins/bldc_motor.scad) Implementation.
+
+[tests/BLDC_motors.scad](tests/BLDC_motors.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `BLDC_base_diameter(type)` | Base diameter |
+| `BLDC_base_height_1(type)` | Base height 1 |
+| `BLDC_base_height_2(type)` | Base height 2 |
+| `BLDC_base_hole_diameter(type)` | Base hole diameter |
+| `BLDC_base_holes(type)` | Base holes |
+| `BLDC_base_open(type)` | Base open |
+| `BLDC_bell_diameter(type)` | Bell diameter |
+| `BLDC_bell_height_1(type)` | Bell height 1 |
+| `BLDC_bell_height_2(type)` | Bell height 2 |
+| `BLDC_bell_hole_diameter(type)` | Bell hole diameter |
+| `BLDC_bell_holes(type)` | Bell holes |
+| `BLDC_bell_spokes(type)` | Bell spoke count |
+| `BLDC_body_colour(type)` | Body colour |
+| `BLDC_boss_diameter(type)` | Boss diameter |
+| `BLDC_boss_height(type)` | Boss height |
+| `BLDC_diameter(type)` | Diameter of motor |
+| `BLDC_height(type)` | Height of motor including boss, if any, but excluding prop shaft |
+| `BLDC_prop_shaft_diameter(type)` | Diameter of unthreaded portion of prop shaft |
+| `BLDC_prop_shaft_length(type)` | Prop shaft length, including threaded section |
+| `BLDC_prop_shaft_thread_diameter(type)` | Diameter of threaded section of prop shaft |
+| `BLDC_prop_shaft_thread_length(type)` | Length of threaded section of prop shaft |
+| `BLDC_shaft_diameter(type)` | shaft diameter |
+| `BLDC_shaft_length(type)` | Total shaft length |
+| `BLDC_shaft_offset(type)` | shaft offset from base |
+| `BLDC_side_colour(type)` | Side colour |
+| `BLDC_wire_diameter(type)` | Wire diameter |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `BLDC(type)` | Draw specified BLDC motor |
+| `BLDC_base_screw_positions(type, n = 4)` | Positions children at the base screw holes |
+| `BLDC_bell_screw_positions(type, n = 4)` | Positions children at the bell screw holes |
+| `BLDC_screw_positions(holes, n = 4)` | Screw positions utility function |
+
+![bldc_motors](tests/png/bldc_motors.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `BLDC(BLDC0603)` |  Brushless DC motor BLDC0603 |
+|   1 | `BLDC(BLDC0802)` |  Brushless DC motor BLDC0802 |
+|   1 | `BLDC(BLDC1105)` |  Brushless DC motor BLDC1105 |
+|   1 | `BLDC(BLDC1306)` |  Brushless DC motor BLDC1306 |
+|   1 | `BLDC(BLDC1804)` |  Brushless DC motor BLDC1804 |
+|   1 | `BLDC(BLDC2205)` |  Brushless DC motor BLDC2205 |
+|   1 | `BLDC(BLDC2212)` |  Brushless DC motor BLDC2212 |
+|   1 | `BLDC(BLDC3548)` |  Brushless DC motor BLDC3548 |
+|   1 | `BLDC(BLDC4250)` |  Brushless DC motor BLDC4250 |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -373,6 +440,7 @@ Models of radial blowers.
 |:--- |:--- |
 | `blower_casing_is_square(type)` | True for square radial fans, false for spiral shape radial blowers |
 | `blower_exit_offset(type)` | Offset of exit's centre from the edge |
+| `blower_size(type)` | Size |
 
 ### Modules
 | Module | Description |
@@ -399,6 +467,44 @@ Models of radial blowers.
 |   2 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Box_sections"></a>
+## Box_sections
+Box sections.
+
+[vitamins/box_sections.scad](vitamins/box_sections.scad) Object definitions.
+
+[vitamins/box_section.scad](vitamins/box_section.scad) Implementation.
+
+[tests/box_sections.scad](tests/box_sections.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `box_section_colour(type)` | Colour |
+| `box_section_colour2(type)` | Colour2, for woven box section |
+| `box_section_fillet(type)` | Fillet |
+| `box_section_material(type)` | Material description |
+| `box_section_size(type)` | Size |
+| `box_section_thickness(type)` | Wall thickness |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `box_section_is_woven(type)` | Box section is woven, eg carbon fiber |
+
+![box_sections](tests/png/box_sections.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `box_section(AL12x8x1, 100)` |  Aluminium rectangular box section 12mm x 8mm x 1mm, length 100mm |
+|   1 | `box_section(AL20x20x2, 100)` |  Aluminium rectangular box section 20mm x 20mm x 2mm, length 100mm |
+|   1 | `box_section(CF10x10x1, 100)` |  Carbon fiber rectangular box section 10mm x 10mm x 1mm, length 100mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -489,7 +595,7 @@ PCB mounted buttons. Can optionally have a coloured cap
 ## Cable_strips
 A strip of polypropylene used with ribbon cable to make a cable flexible in one direction only.
 
-Modelled with a Bezier spline, which is not quite the same as a minimum energy curve but very close, epecially
+Modelled with a Bezier spline, which is not quite the same as a minimum energy curve but very close, especially
 near the extreme positions, where the model needs to be accurate.
 
 When the sides are constrained then a circular model is more accurate.
@@ -537,7 +643,7 @@ PCB cameras.
 |:--- |:--- |
 | `camera_connector_pos(type)` | The flex connector block for the camera itself's position |
 | `camera_connector_size(type)` | The flex connector block for the camera itself's size |
-| `camera_lens(type)` | Stack of lens parts, can be round, rectanular or rounded rectangular, with optional tapered aperture |
+| `camera_lens(type)` | Stack of lens parts, can be round, rectangular or rounded rectangular, with optional tapered aperture |
 | `camera_lens_offset(type)` | Offset of the lens center from the PCB centre |
 | `camera_pcb(type)` | The PCB part of the camera |
 
@@ -795,7 +901,7 @@ Dual inline IC packages and sockets
 ---
 <a name="Displays"></a>
 ## Displays
-LCD dispays.
+LCD displays.
 
 [vitamins/displays.scad](vitamins/displays.scad) Object definitions.
 
@@ -1053,23 +1159,23 @@ Geared tin can steppers
 |:--- |:--- |
 | `gs_boss_d(type)` | Boss around the shaft diameter |
 | `gs_boss_h(type)` | Boss around the shaft height |
-| `gs_bulge2_d(type)` | Plastic rear bulge depth from centre |
-| `gs_bulge2_h(type)` | Plastic rear bulge height |
-| `gs_bulge2_w(type)` | Plastic rear bulge width |
-| `gs_bulge_d(type)` | Plastic bulge depth from centre |
-| `gs_bulge_h(type)` | Plastic bulge height |
-| `gs_bulge_w(type)` | Plastic bulge width |
+| `gs_bulge(type)` | Plastic bulge width, depth, height, z offset |
+| `gs_bulge2(type)` | Plastic rear bulge width, depth, height |
 | `gs_diameter(type)` | Can diameter |
 | `gs_flat_length(type)` | Shaft flat length |
 | `gs_height(type)` | Can height |
 | `gs_hole_d(type)` | Screw hole diameter |
 | `gs_lug_t(type)` | Screw lug thickness |
 | `gs_lug_w(type)` | Screw lug width |
+| `gs_motor(type)` | Motor diameter and height if separate from gearbox |
 | `gs_offset(type)` | Offset of the shaft from the centre of the can |
 | `gs_pitch(type)` | Screw pitch |
+| `gs_radius(type)` | Top - or bottom + corner radius |
 | `gs_shaft_d(type)` | Shaft diameter |
 | `gs_shaft_flat(type)` | Shaft width across the flats |
 | `gs_shaft_length(type)` | Shaft length |
+| `gs_wire_d(type)` | Wire diameter |
+| `gs_wires(type)` | Wire colours and grouping |
 
 ### Modules
 | Module | Description |
@@ -1083,6 +1189,7 @@ Geared tin can steppers
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | `geared_stepper(28BYJ_48)` |  Geared stepper - 28BYJ-48 5V |
+|   1 | `geared_stepper(35BYGHJ75)` |  Geared stepper - 35BYGHJ75 0.4A |
 
 
 <a href="#top">Top</a>
@@ -1196,7 +1303,7 @@ Needs updating as mostly obsolete versions.
 |   1 |  |  Tape self amalgamating silicone 110mm x 25mm |
 |   1 | `resistor(Epcos)` |  Thermistor Epcos B57560G104F 100K 1% - not shown |
 |   2 |  |  Wire Red PTFE 16/0.2mm strands, length 170mm |
-|   4 | `ziptie(small_ziptie, 8)` |  Ziptie 2.5mm x 100mm min length |
+|   4 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -1289,7 +1396,7 @@ IEC mains inlets and outlet.
 |   1 | `iec(IEC_inlet)` |  IEC inlet |
 |   1 | `iec(IEC_inlet_atx)` |  IEC inlet for ATX |
 |   1 | `iec(IEC_outlet)` |  IEC outlet RS 811-7193 |
-|   1 | `iec(IEC_switched_fused_inlet)` |  IEC320 C14 switched fused inlet module |
+|   1 | `iec(IEC_320_C14_switched_fused_inlet)` |  IEC320 C14 switched fused inlet module |
 |  12 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   4 | `screw(M3_cs_cap_screw, 10)` |  Screw M3 cs cap x 10mm |
 |   8 | `screw(M3_cs_cap_screw, 12)` |  Screw M3 cs cap x 12mm |
@@ -1440,12 +1547,14 @@ Nuts for leadscrews.
 | Function | Description |
 |:--- |:--- |
 | `leadnut_bore(type)` | Thread size |
+| `leadnut_colour(type)` | The colour |
 | `leadnut_flange_dia(type)` | Flange diameter |
 | `leadnut_flange_offset(type)` | Offset of the flange from the top |
 | `leadnut_flange_t(type)` | Flange thickness |
+| `leadnut_flat(type)` | Flat section width |
 | `leadnut_height(type)` | Total height |
 | `leadnut_hole_dia(type)` | The diameter of the screw holes |
-| `leadnut_hole_pitch(type)` | The radia pitch of the screw holes |
+| `leadnut_hole_pitch(type)` | The radial pitch of the screw holes |
 | `leadnut_holes(type)` | The number of screw holes |
 | `leadnut_lead(type)` | Screw lead |
 | `leadnut_od(type)` | Outer diameter of the shank |
@@ -1470,6 +1579,7 @@ Nuts for leadscrews.
 | ---:|:--- |:---|
 |   1 | `leadnut(LSN8x2)` |  Leadscrew nut 8 x 2 |
 |   1 | `leadnut(LSN8x8)` |  Leadscrew nut 8 x 8 RobotDigg |
+|   1 | `leadnut(SFU1610)` |  Leadscrew nut for SFU1610 |
 
 
 <a href="#top">Top</a>
@@ -1585,7 +1695,7 @@ Standard domed through hole LEDs. Can specify colour and lead length.
 LED strip lights that can be cut to size.
 
 The definitions are for the full length but they can be cut to size by specifying how many segments,
-which can by calcuated using `light_strip_segments(type, max_length)`.
+which can by calculated using `light_strip_segments(type, max_length)`.
 
 The `light_strip_clip()` module makes a clip to go around the light that can be incorporated into a printed bracket to hold it.
 
@@ -2016,9 +2126,9 @@ Can be shown stretched by specifying the `actual_id`.
 ---
 <a name="Opengrab"></a>
 ## Opengrab
-Nicodrone OpenGrab V3 electro-permananet magnet, see <https://nicadrone.com/products/epm-v3>.
+Nicodrone OpenGrab V3 electro-permanent magnet, see <https://nicadrone.com/products/epm-v3>.
 
-A permanent magnet that can be magnatized and de-magnatized electronically.
+A permanent magnet that can be magnetized and de-magnetized electronically.
 
 [vitamins/opengrab.scad](vitamins/opengrab.scad) Implementation.
 
@@ -2061,7 +2171,7 @@ Panel mounted digital meter modules
 Notes on the DSN_VC288:
 
 * The tabs aren't modelled because they can be fully retracted if the PCB is removed.
-* The current connector isn't moddelled as it is awkwardly tall. I remove it and solder wires instead.
+* The current connector isn't modelled as it is awkwardly tall. I remove it and solder wires instead.
 
 [vitamins/panel_meters.scad](vitamins/panel_meters.scad) Object definitions.
 
@@ -2140,9 +2250,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `hdmi_width1(type)` | Inside width at the top |
 | `hdmi_width2(type)` | Inside width at the bottom |
 | `pcb_accessories(type)` | List of accessories to go on the BOM, SD cards, USB cables, etc. |
-| `pcb_colour(type)` | Colour of the subtrate |
+| `pcb_colour(type)` | Colour of the substrate |
 | `pcb_components(type)` | List of components |
-| `pcb_grid(type)` | Grid if a perfboard |
+| `pcb_grid(type)` | Grid origin if a perfboard |
 | `pcb_hole_d(type)` | Mounting hole diameter |
 | `pcb_holes(type)` | List of hole positions |
 | `pcb_land_d(type)` | Pad around mounting hole |
@@ -2157,6 +2267,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| `pcb_component(type, name, index = 0)` | Return the component specified by name and index |
 | `pcb_component_position(type, name, index = 0)` | Return x y position of specified component |
 | `pcb_coord(type, p)` | Convert offsets from the edge to coordinates relative to the centre |
 | `pcb_grid_pos(type, x, y, z = 0)` | Returns a pcb grid position |
@@ -2175,7 +2286,8 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `hdmi(type, cutout = false)` | Draw HDMI socket |
 | `jack(cutout = false)` | Draw 3.5mm jack |
 | `molex_254(ways)` | Draw molex header |
-| `molex_usb_Ax2(cutout)` | Draw Molex USB connector suitable for perf board |
+| `molex_usb_Ax1(cutout)` | Draw Molex USB A connector suitable for perf board |
+| `molex_usb_Ax2(cutout)` | Draw Molex dual USB A connector suitable for perf board |
 | `pcb(type)` | Draw specified PCB |
 | `pcb_assembly(type, height, thickness)` | Draw PCB assembly with spaces and fasteners in place |
 | `pcb_base(type, height, thickness, wall = 2)` | Generate STL for a base with PCB spacers |
@@ -2228,6 +2340,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `ax_res(res1_8, 1e+6, tol = 1)` |  Resistor 1e+6 Ohms 1% 0.125W |
 |   1 | `smd_led(LED0603, orange)` |  SMD LED 0603 orange |
 |   1 | `smd_led(LED0805, red)` |  SMD LED 0805 red |
+|   1 | `smd_capacitor(CAP0603)` |  SMD capacitor 0603 |
+|   1 | `smd_capacitor(CAP0805)` |  SMD capacitor 0805 |
+|   1 | `smd_capacitor(CAP1206)` |  SMD capacitor 1206 |
 |   1 | `smd_resistor(RES0603, 1K)` |  SMD resistor 0603 1K 0.1W |
 |   1 | `smd_resistor(RES0805, 1K)` |  SMD resistor 0805 1K 0.125W |
 |   1 | `smd_resistor(RES1206, 1K)` |  SMD resistor 1206 1K 0.25W |
@@ -2276,9 +2391,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `hdmi_width1(type)` | Inside width at the top |
 | `hdmi_width2(type)` | Inside width at the bottom |
 | `pcb_accessories(type)` | List of accessories to go on the BOM, SD cards, USB cables, etc. |
-| `pcb_colour(type)` | Colour of the subtrate |
+| `pcb_colour(type)` | Colour of the substrate |
 | `pcb_components(type)` | List of components |
-| `pcb_grid(type)` | Grid if a perfboard |
+| `pcb_grid(type)` | Grid origin if a perfboard |
 | `pcb_hole_d(type)` | Mounting hole diameter |
 | `pcb_holes(type)` | List of hole positions |
 | `pcb_land_d(type)` | Pad around mounting hole |
@@ -2293,6 +2408,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| `pcb_component(type, name, index = 0)` | Return the component specified by name and index |
 | `pcb_component_position(type, name, index = 0)` | Return x y position of specified component |
 | `pcb_coord(type, p)` | Convert offsets from the edge to coordinates relative to the centre |
 | `pcb_grid_pos(type, x, y, z = 0)` | Returns a pcb grid position |
@@ -2311,7 +2427,8 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `hdmi(type, cutout = false)` | Draw HDMI socket |
 | `jack(cutout = false)` | Draw 3.5mm jack |
 | `molex_254(ways)` | Draw molex header |
-| `molex_usb_Ax2(cutout)` | Draw Molex USB connector suitable for perf board |
+| `molex_usb_Ax1(cutout)` | Draw Molex USB A connector suitable for perf board |
+| `molex_usb_Ax2(cutout)` | Draw Molex dual USB A connector suitable for perf board |
 | `pcb(type)` | Draw specified PCB |
 | `pcb_assembly(type, height, thickness)` | Draw PCB assembly with spaces and fasteners in place |
 | `pcb_base(type, height, thickness, wall = 2)` | Generate STL for a base with PCB spacers |
@@ -2352,6 +2469,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(EnviroPlus)` |  Enviro+ |
 |   1 | `pcb(ExtruderPCB)` |  Extruder connection PCB |
 |   1 | `pcb(Keyes5p1)` |  Keyes5.1 Arduino Uno expansion board - not shown |
+|   1 | `pcb(LIPO_fuel_gauge)` |  LIPO fuel gauge |
 |   1 | `pcb(MP1584EN)` |  MP1584EN 3A buck converter |
 |   1 | `pcb(MT3608)` |  MT3608 boost converter module |
 |   1 | `pcb(Melzi)` |  Melzi electronics - not shown |
@@ -2359,65 +2477,71 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 |  |  Micro SD card - not shown |
 |   1 | `molex_254(2)` |  Molex KK header 2 way |
 |   1 | `molex_254(3)` |  Molex KK header 3 way |
-|  16 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
+|  20 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
 |  30 | `nut(M2p5_nut, nyloc = true)` |  Nut M2.5 x 2.2mm nyloc |
-|  22 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
+|  26 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   8 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
 |   1 | `pcb(PI_IO)` |  PI_IO V2 |
 |   1 | `pcb(PSU12V1A)` |  PSU 12V 1A - not shown |
 |   1 | `pcb(PERF60x40)` |  Perfboard 60 x 40mm |
 |   1 | `pcb(PERF70x30)` |  Perfboard 70 x 30mm |
 |   1 | `pcb(PERF70x50)` |  Perfboard 70 x 50mm |
+|   1 | `pcb(PERF70x51)` |  Perfboard 70 x 51mm |
 |   1 | `pcb(PERF74x51)` |  Perfboard 74 x 51mm |
 |   1 | `pcb(PERF80x20)` |  Perfboard 80 x 20mm |
 |   1 | `pin_socket(2p54header, 13, 2, right_angle = true)` |  Pin socket 13 x 2 right_angle |
 |   1 | `pcb(RAMPSEndstop)` |  RAMPS Endstop Switch |
 |   1 | `pcb(RPI3)` |  Raspberry Pi 3 |
 |   1 | `pcb(RPI4)` |  Raspberry Pi 4 |
+|   1 | `pcb(RPI_Pico)` |  Raspberry Pi Pico |
 |   1 | `pcb(RPI0)` |  Raspberry Pi Zero |
-|  12 | `screw(M2_cap_screw, 16)` |  Screw M2 cap x 16mm |
-|   4 | `screw(M2_cap_screw, 20)` |  Screw M2 cap x 20mm |
-|   2 | `screw(M2p5_cap_screw, 20)` |  Screw M2.5 cap x 20mm |
+|   8 | `screw(M2_cap_screw, 16)` |  Screw M2 cap x 16mm |
+|  12 | `screw(M2_cap_screw, 20)` |  Screw M2 cap x 20mm |
+|   2 | `screw(M2p5_cap_screw, 16)` |  Screw M2.5 cap x 16mm |
+|   4 | `screw(M2p5_cap_screw, 20)` |  Screw M2.5 cap x 20mm |
 |   8 | `screw(M2p5_cap_screw, 25)` |  Screw M2.5 cap x 25mm |
-|   8 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
-|  12 | `screw(M2p5_pan_screw, 25)` |  Screw M2.5 pan x 25mm |
-|   4 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
-|   9 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
-|   9 | `screw(M3_cap_screw, 35)` |  Screw M3 cap x 35mm |
+|   4 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
+|   4 | `screw(M2p5_pan_screw, 20)` |  Screw M2.5 pan x 20mm |
+|   8 | `screw(M2p5_pan_screw, 25)` |  Screw M2.5 pan x 25mm |
+|   8 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
+|   4 | `screw(M3_cap_screw, 25)` |  Screw M3 cap x 25mm |
+|  14 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
 |   8 | `screw(M4_cap_screw, 35)` |  Screw M4 cap x 35mm |
+|   1 | `pcb(XIAO)` |  Seeeduino XIAO |
 |   1 | `pcb(TP4056)` |  TP4056 Li-lon Battery charger module |
 |   3 | `terminal_35(2)` |  Terminal block 2 way 3.5mm |
 |   2 | `green_terminal(gt_2p54, 4)` |  Terminal block 4 way 0.1" |
 |   1 |  |  USB A to Mini B lead - not shown |
 |   1 | `pcb(WD2002SJ)` |  WD2002SJ Buck Boost DC-DC converter |
-|  16 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
+|  20 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
 |  30 | `washer(M2p5_washer)` |  Washer  M2.5 x 5.9mm x 0.5mm |
-|  22 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+|  26 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   8 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 |   1 | `pcb(ZC_A0591)` |  ZC-A0591 ULN2003 driver PCB |
 
 ### Printed
 | Qty | Filename |
 | ---:|:--- |
-|   4 | pcb_spacer2060.stl |
+|   8 | pcb_spacer20100.stl |
 |   4 | pcb_spacer2070.stl |
 |   4 | pcb_spacer2080.stl |
 |   4 | pcb_spacer2090.stl |
+|   4 | pcb_spacer25110.stl |
 |   4 | pcb_spacer25120.stl |
-|   4 | pcb_spacer25130.stl |
-|   4 | pcb_spacer25140.stl |
-|   4 | pcb_spacer25150_2.stl |
-|   4 | pcb_spacer25160_2.stl |
-|   4 | pcb_spacer25180.stl |
-|   4 | pcb_spacer25190.stl |
-|   2 | pcb_spacer2580.stl |
-|   4 | pcb_spacer30170.stl |
-|   5 | pcb_spacer30200.stl |
-|   5 | pcb_spacer30210.stl |
-|   4 | pcb_spacer30220.stl |
+|   4 | pcb_spacer25130_2.stl |
+|   4 | pcb_spacer25140_2.stl |
+|   4 | pcb_spacer25160.stl |
+|   4 | pcb_spacer25170.stl |
+|   2 | pcb_spacer2550.stl |
+|   4 | pcb_spacer2590.stl |
+|   4 | pcb_spacer30150.stl |
+|   5 | pcb_spacer30180.stl |
+|   5 | pcb_spacer30190.stl |
+|   4 | pcb_spacer30200.stl |
 |   4 | pcb_spacer3050.stl |
-|   4 | pcb_spacer40230.stl |
-|   4 | pcb_spacer40240.stl |
+|   4 | pcb_spacer3060.stl |
+|   4 | pcb_spacer40210.stl |
+|   4 | pcb_spacer40220.stl |
 
 
 <a href="#top">Top</a>
@@ -2553,7 +2677,7 @@ Pin headers and sockets, etc.
 |:--- |:--- |
 | `box_header(type, cols = 1, rows = 1, smt = false, cutout = false)` | Draw box header |
 | `idc_transition(type, cols = 5, skip = [], cutout = false)` | Draw IDC transition header |
-| `jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false)` | Draw JST XH connector |
+| `jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false, smt = false)` | Draw JST XH connector |
 | `pin(type, length = undef)` | Draw a header pin |
 | `pin_header(type, cols = 1, rows = 1, smt = false, right_angle = false, cutout = false, colour)` | Draw pin header |
 | `pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt = false, cutout = false, colour)` | Draw pin socket |
@@ -2583,7 +2707,7 @@ Pin headers and sockets, etc.
 ---
 <a name="PSUs"></a>
 ## PSUs
-Powersupplies. Can be a simple cube or can be defined by a list of six faces, each with thickness, holes, cutouts, etc.
+Power supplies. Can be a simple cube or can be defined by a list of six faces, each with thickness, holes, cutouts, etc.
 
 Face order is bottom, top, left, right, front, back.
 
@@ -2627,6 +2751,7 @@ Face order is bottom, top, left, right, front, back.
 | Function | Description |
 |:--- |:--- |
 | `psu_face_transform(type, face)` | Returns a transformation matrix to get to the specified face |
+| `psu_size(type)` | Size |
 | `terminal_block_length(type, ways)` | Total length of terminal block |
 
 ### Modules
@@ -2680,7 +2805,7 @@ Timing belt pulleys, both toothed and plain with internal bearings for idlers.
 | `pulley_hub_length(type)` | Hub length |
 | `pulley_od(type)` | Outer diameter |
 | `pulley_screw(type)` | Grub screw type |
-| `pulley_screw_length(type)` | Grup screw length |
+| `pulley_screw_length(type)` | Grub screw length |
 | `pulley_screw_z(type)` | Grub screw position |
 | `pulley_screws(type)` | Number of grub screws |
 | `pulley_teeth(type)` | Number of teeth |
@@ -2786,12 +2911,16 @@ Linear rails with carriages.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
+|   1 | `rail(HGH15CA, 200)` |  Linear rail HGH15CA x 200mm |
+|   1 | `rail(HGH20CA, 200)` |  Linear rail HGH20CA x 200mm |
 |   1 | `rail(MGN12, 200)` |  Linear rail MGN12 x 200mm |
 |   1 | `rail(MGN15, 200)` |  Linear rail MGN15 x 200mm |
 |   1 | `rail(MGN5, 200)` |  Linear rail MGN5 x 200mm |
 |   1 | `rail(MGN7, 200)` |  Linear rail MGN7 x 200mm |
 |   1 | `rail(MGN9, 200)` |  Linear rail MGN9 x 200mm |
 |   1 | `rail(SSR15, 200)` |  Linear rail SSR15 x 200mm |
+|   1 | `carriage(HGH15CA_carriage)` |  Linear rail carriage HGH15CA |
+|   1 | `carriage(HGH20CA_carriage)` |  Linear rail carriage HGH20CA |
 |   1 | `carriage(MGN12C_carriage)` |  Linear rail carriage MGN12C |
 |   1 | `carriage(MGN12H_carriage)` |  Linear rail carriage MGN12H |
 |   1 | `carriage(MGN15C_carriage)` |  Linear rail carriage MGN15C |
@@ -2803,7 +2932,8 @@ Linear rails with carriages.
 |   1 | `carriage(SSR15_carriage)` |  Linear rail carriage SSR15 |
 |  26 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
 |  23 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
-|   4 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
+|   7 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
+|   3 | `nut(M5_nut, nyloc = true)` |  Nut M5 x 4mm nyloc |
 |  11 | `screw(M2_cap_screw, 10)` |  Screw M2 cap x 10mm |
 |  15 | `screw(M2_cs_cap_screw, 10)` |  Screw M2 cs cap x 10mm |
 |   8 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
@@ -2812,10 +2942,15 @@ Linear rails with carriages.
 |   2 | `screw(M3_cs_cap_screw, 12)` |  Screw M3 cs cap x 12mm |
 |   4 | `screw(M3_cs_cap_screw, 16)` |  Screw M3 cs cap x 16mm |
 |   2 | `screw(M4_cap_screw, 16)` |  Screw M4 cap x 16mm |
+|   2 | `screw(M4_cap_screw, 20)` |  Screw M4 cap x 20mm |
 |   2 | `screw(M4_cs_cap_screw, 20)` |  Screw M4 cs cap x 20mm |
+|   2 | `screw(M4_cs_cap_screw, 25)` |  Screw M4 cs cap x 25mm |
+|   2 | `screw(M5_cap_screw, 20)` |  Screw M5 cap x 20mm |
+|   2 | `screw(M5_cs_cap_screw, 25)` |  Screw M5 cs cap x 25mm |
 |  26 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
 |  23 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
-|   4 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
+|   7 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
+|   3 | `washer(M5_washer)` |  Washer  M5 x 10mm x 1mm |
 
 
 <a href="#top">Top</a>
@@ -2851,7 +2986,7 @@ Ring terminals and earth assemblies for DiBond panels.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `ring_terminal(type)` | Draw specifeid ring terminal |
+| `ring_terminal(type)` | Draw specified ring terminal |
 | `ring_terminal_assembly(type, thickness, top = false)` | Earthing assembly for DiBond twin skins |
 | `ring_terminal_hole(type, h = 0)` | Drill hole for the screw |
 
@@ -2927,7 +3062,7 @@ Rocker switch. Also used for neon indicator in the same form factor.
 ## Rod
 Steel rods and studding with chamfered ends.
 
-These items are sysmtrical, so by default the origin is in the centre but it can be changed to the bottom.
+These items are symmetrical, so by default the origin is in the centre but it can be changed to the bottom.
 
 [vitamins/rod.scad](vitamins/rod.scad) Implementation.
 
@@ -3027,6 +3162,7 @@ For an explanation of `screw_polysink()` see <https://hydraraptor.blogspot.com/2
 |   1 | `screw(M2_cs_cap_screw, 10)` |  Screw M2 cs cap x 10mm |
 |   1 | `screw(M2_dome_screw, 10)` |  Screw M2 dome x 10mm |
 |   1 | `screw(M2p5_cap_screw, 10)` |  Screw M2.5 cap x 10mm |
+|   1 | `screw(M2p5_dome_screw, 10)` |  Screw M2.5 dome x 10mm |
 |   1 | `screw(M2p5_pan_screw, 10)` |  Screw M2.5 pan x 10mm |
 |   1 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   1 | `screw(M3_cs_cap_screw, 10)` |  Screw M3 cs cap x 10mm |
@@ -3038,24 +3174,28 @@ For an explanation of `screw_polysink()` see <https://hydraraptor.blogspot.com/2
 |   1 | `screw(M4_cap_screw, 25)` |  Screw M4 cap x 25mm |
 |   1 | `screw(M4_cs_cap_screw, 25)` |  Screw M4 cs cap x 25mm |
 |   1 | `screw(M4_dome_screw, 25)` |  Screw M4 dome x 25mm |
-|   1 | `screw(M4_grub_screw, 6)` |  Screw M4 grub x  6mm |
+|   1 | `screw(M4_grub_screw, 8)` |  Screw M4 grub x  8mm |
 |   1 | `screw(M4_hex_screw, 30)` |  Screw M4 hex x 30mm |
 |   1 | `screw(M4_pan_screw, 30)` |  Screw M4 pan x 30mm |
 |   1 | `screw(M5_cap_screw, 30)` |  Screw M5 cap x 30mm |
 |   1 | `screw(M5_cs_cap_screw, 30)` |  Screw M5 cs cap x 30mm |
 |   1 | `screw(M5_dome_screw, 30)` |  Screw M5 dome x 30mm |
+|   1 | `screw(M5_grub_screw, 10)` |  Screw M5 grub x 10mm |
 |   1 | `screw(M5_hex_screw, 30)` |  Screw M5 hex x 30mm |
 |   1 | `screw(M5_pan_screw, 30)` |  Screw M5 pan x 30mm |
 |   1 | `screw(M6_cap_screw, 30)` |  Screw M6 cap x 30mm |
 |   1 | `screw(M6_cs_cap_screw, 30)` |  Screw M6 cs cap x 30mm |
+|   1 | `screw(M6_grub_screw, 12)` |  Screw M6 grub x 12mm |
 |   1 | `screw(M6_hex_screw, 30)` |  Screw M6 hex x 30mm |
 |   1 | `screw(M6_pan_screw, 30)` |  Screw M6 pan x 30mm |
 |   1 | `screw(M8_cap_screw, 35)` |  Screw M8 cap x 35mm |
+|   1 | `screw(M8_cs_cap_screw, 35)` |  Screw M8 cs cap x 35mm |
 |   1 | `screw(M8_hex_screw, 30)` |  Screw M8 hex x 30mm |
 |   1 | `screw(No2_screw, 10)` |  Screw No2 pan wood x 10mm |
 |   1 | `screw(No4_screw, 10)` |  Screw No4 pan wood x 10mm |
 |   1 | `screw(No6_cs_screw, 30)` |  Screw No6 cs wood x 30mm |
 |   1 | `screw(No6_screw, 30)` |  Screw No6 pan wood x 30mm |
+|   1 | `screw(No8_screw, 30)` |  Screw No8 pan wood x 30mm |
 
 ### Printed
 | Qty | Filename |
@@ -3087,6 +3227,61 @@ Sealing strip from B&Q used to seal around the door of 3D printers.
 |   1 | `sealing_strip(100)` |  Sealing strip 10mm x 4mm x 100mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Servo_motors"></a>
+## Servo_motors
+BLDC servos for CNC machines
+
+[vitamins/servo_motors.scad](vitamins/servo_motors.scad) Object definitions.
+
+[vitamins/servo_motor.scad](vitamins/servo_motor.scad) Implementation.
+
+[tests/servo_motors.scad](tests/servo_motors.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `faceplate_boss_size(type)` | Centre boss outer d, inner d and height |
+| `faceplate_hole_dia(type)` | Screw hole size |
+| `faceplate_hole_pitch(type)` | Screw hole pitch |
+| `faceplate_thickness(type)` | Thickness of the faceplate |
+| `faceplate_width(type)` | Width of faceplate |
+| `servo_motor_cap(type)` | Diameter height and corner radius of encoder cover |
+| `servo_motor_faceplate(type)` | Face plate type |
+| `servo_motor_length(type)` | Total length from the faceplate |
+| `servo_motor_shaft(type)` | Shaft type |
+| `shaft_diameter(type)` | Shaft diameter |
+| `shaft_key_size(type)` | None |
+| `shaft_length(type)` | Shaft length |
+| `shaft_type(type)` | String to indicate the shaft type |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `servo_motor_width(type)` | Width of the motor body |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `faceplate_screw_positions(type)` | Position children at faceplate screw positions |
+| `motor_faceplate(type)` | Draw specified motor faceplate |
+| `motor_shaft(type)` | Draw the specified motor shaft |
+| `servo_motor(type)` | Draw the specified servo |
+| `servo_screw_positions(type)` | Position children at screw positions |
+
+![servo_motors](tests/png/servo_motors.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `servo_motor(Lichuan_M01330_80ST) ` |  Servo Lichuan LCMT07L02NB-80M01330B 80ST mount 80 x 123mm |
+|   1 | `servo_motor(Lichuan_M02430_80ST) ` |  Servo Lichuan LCMT07L02NB-80M02430B 80ST mount 80 x 150mm |
+|   1 | `servo_motor(Lichuan_M03530_80ST) ` |  Servo Lichuan LCMT07L02NB-80M03530B 80ST mount 80 x 178mm |
+|   1 | `servo_motor(Lichuan_M04030_80ST) ` |  Servo Lichuan LCMT07L02NB-80M04030B 80ST mount 80 x 190mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -3128,7 +3323,7 @@ Shaft couplings
 ## Sheets
 Sheet materials. Rectangular with optional rounded corners. Negative radii make a chamfer.
 
-The "Soft" parameter can be used to determinesif the sheet material needs machine screws or wood screws, e.g.:
+The "Soft" parameter can be used to determine if the sheet material needs machine screws or wood screws, e.g.:
 
 * If soft, wood screws will be used, with a pilot hole.
 * If not soft, either tapped holes or a clearance hole and nuts will be used to retain screws.
@@ -3155,8 +3350,8 @@ When woven sheets (e.g. carbon fibre) are rendered it is necessary to specify th
 | `sheet_colour2(type)` | Second colour for a woven sheet |
 | `sheet_is_soft(type)` | Is soft enough for wood screws |
 | `sheet_thickness(type)` | Thickness |
-| `sheet_warp(type)` | Wovern sheet warp |
-| `sheet_weft(type)` | Wovern sheet weft |
+| `sheet_warp(type)` | Woven sheet warp |
+| `sheet_weft(type)` | Woven sheet weft |
 
 ### Functions
 | Function | Description |
@@ -3177,6 +3372,9 @@ When woven sheets (e.g. carbon fibre) are rendered it is necessary to specify th
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | `sheet(FoilTape, 30, 30, 2)` |  Aluminium foil tape 30mm x 30mm x 0.05mm |
+|   1 | `sheet(AL1_6, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 1.6mm |
+|   1 | `sheet(AL2, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 2mm |
+|   1 | `sheet(AL3, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 3mm |
 |   1 | `sheet(AL6, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 6mm |
 |   1 | `sheet(AL8, 30, 30, 2)` |  Aluminium tooling plate 30mm x 30mm x 8mm |
 |   1 | `sheet(Spring05, 30, 30, 2)` |  Bi-metal saw blade 30mm x 30mm x 0.5mm |
@@ -3272,6 +3470,8 @@ Surface mount components for PCBs.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| `smd_cap_end_cap(type)` | End cap width |
+| `smd_cap_size(type)` | Body length, width |
 | `smd_led_lens(type)` | Lens length width and height |
 | `smd_led_size(type)` | Body length, width and height |
 | `smd_res_end_cap(type)` | End cap width |
@@ -3288,6 +3488,7 @@ Surface mount components for PCBs.
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `smd_capacitor(type, height)` | Draw an SMD capacitor with specified height |
 | `smd_led(type, colour, cutout)` | Draw an SMD LED with specified `colour` |
 | `smd_resistor(type, value)` | Draw an SMD resistor with specified value |
 
@@ -3298,6 +3499,9 @@ Surface mount components for PCBs.
 | ---:|:--- |:---|
 |   1 | `smd_led(LED0603, green)` |  SMD LED 0603 green |
 |   1 | `smd_led(LED0805, blue)` |  SMD LED 0805 blue |
+|   1 | `smd_capacitor(CAP0603)` |  SMD capacitor 0603 |
+|   1 | `smd_capacitor(CAP0805)` |  SMD capacitor 0805 |
+|   1 | `smd_capacitor(CAP1206)` |  SMD capacitor 1206 |
 |   1 | `smd_resistor(RES0603, 1R0)` |  SMD resistor 0603 1R0 0.1W |
 |   1 | `smd_resistor(RES0805, 10M)` |  SMD resistor 0805 10M 0.125W |
 |   1 | `smd_resistor(RES1206, 100K)` |  SMD resistor 1206 100K 0.25W |
@@ -3487,15 +3691,20 @@ NEMA stepper motor model.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| `NEMA_black_caps(type)` | End caps are black |
 | `NEMA_body_radius(type)` | Body radius |
 | `NEMA_boss_height(type)` | Boss height |
 | `NEMA_boss_radius(type)` | Boss around the spindle radius |
 | `NEMA_cap_heights(type)` | Height of the end cap at the corner and the side |
+| `NEMA_end_connector(type)` | If has a connector then plug goes in the end rather than the side |
 | `NEMA_hole_pitch(type)` | Screw hole pitch |
 | `NEMA_length(type)` | Body length |
 | `NEMA_radius(type)` | End cap radius |
+| `NEMA_shaft_bore(type)` | Hollow shaft in non-zero |
 | `NEMA_shaft_dia(type)` | Shaft diameter |
 | `NEMA_shaft_length(type)` | Shaft length above the face, if a list then a leadscrew: length, lead, starts |
+| `NEMA_shaft_length2(type)` | Rear shaft length if non-zero |
+| `NEMA_thread_d(type)` | Screw hole diameter |
 | `NEMA_width(type)` | Width of the square face |
 
 ### Functions
@@ -3526,6 +3735,8 @@ NEMA stepper motor model.
 |   1 | `NEMA(NEMA17M)` |  Stepper motor NEMA17 x 40mm |
 |   1 | `NEMA(NEMA17)` |  Stepper motor NEMA17 x 47mm |
 |   1 | `NEMA(NEMA23)` |  Stepper motor NEMA22 x 51.2mm |
+|   1 | `NEMA(NEMA8)` |  Stepper motor NEMA8 x 30mm |
+|   1 | `NEMA(NEMA8BH)` |  Stepper motor NEMA8 x 30mm |
 |  16 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |  20 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
 
@@ -3887,7 +4098,7 @@ If a washer is given a child, usually a screw or a nut, then it is placed on its
 | `spring_washer_thickness(type)` | Spring washer thickness |
 | `star_washer_diameter(type)` | Star version size |
 | `washer_diameter(type)` | External diameter |
-| `washer_size(type)` | Noiminal size |
+| `washer_size(type)` | Nominal size |
 | `washer_soft(type)` | True if rubber |
 | `washer_thickness(type)` | Thickness |
 
@@ -4000,7 +4211,7 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 |   1 |  |  Wire orange 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire red 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire yellow 7/0.2mm strands, length 90mm |
-|   1 | `ziptie(small_ziptie, 2.1)` |  Ziptie 2.5mm x 100mm min length |
+|   1 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -4028,16 +4239,16 @@ Cable zipties.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `ziptie(type, r, t = 0)` | Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t` |
+| `ziptie(type, r = 5, t = 0)` | Draw specified ziptie wrapped around radius `r` and optionally through panel thickness `t` |
 
 ![zipties](tests/png/zipties.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `ziptie(small_ziptie, 5)` |  Ziptie 2.5mm x 100mm min length |
-|   1 | `ziptie(ziptie_3p6mm, 5)` |  Ziptie 3.6mm x 100mm min length |
-|   1 | `ziptie(ziptie_3mm, 5)` |  Ziptie 3mm x 100mm min length |
+|   1 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
+|   1 | `ziptie(ziptie_3p6mm)` |  Ziptie 3.6mm x 100mm min length |
+|   1 | `ziptie(ziptie_3mm)` |  Ziptie 3mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -4195,7 +4406,7 @@ Uses [fixing blocks](#fixing_block) and [corner blocks](#corner_block).
 | Function | Description |
 |:--- |:--- |
 | `bbox(screw, sheets, base_sheet, top_sheet, span, size, name = "bbox", skip_blocks = [], star_washers = true)` | Construct the property list for a butt_box |
-| `bbox_area(type)` | Internal surdface area in m^2 |
+| `bbox_area(type)` | Internal surface area in m^2 |
 | `bbox_volume(type)` | Internal volume in litres |
 
 ### Modules
@@ -4498,7 +4709,7 @@ Rubber door [sealing strip](#sealing_strip) is used to make it airtight and a [d
 |:--- |:--- |
 | `door_hinge(door_thickness)` | Generates STL for the moving part of the hinge |
 | `door_hinge_assembly(top, door_thickness = 6)` | The moving assembly that goes on the door |
-| `door_hinge_hole_positions(dir = 0)` | Position chidren at the door hole positions |
+| `door_hinge_hole_positions(dir = 0)` | Position children at the door hole positions |
 | `door_hinge_parts_stl()` | Generates the STL for both parts of the hinge |
 | `door_hinge_stat_hole_positions(dir = 0)` | Position children over the screws holes of the stationary part |
 | `door_hinge_stat_stl()` | Generates the STL for the stationary part |
@@ -4544,7 +4755,7 @@ Door latch for 6mm acrylic door for 3D printer. See [door_hinge](#door_hinge).
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `door_latch_assembly(sheet_thickness = 3)` | The assembly for a specified sheet thickess |
+| `door_latch_assembly(sheet_thickness = 3)` | The assembly for a specified sheet thickness |
 | `door_latch_stl()` | Generates the STL for the printed part |
 
 ![door_latch](tests/png/door_latch.png)
@@ -4569,7 +4780,7 @@ Door latch for 6mm acrylic door for 3D printer. See [door_hinge](#door_hinge).
 ## Drag_chain
 Parametric cable drag chain to limit the bend radius of a cable run.
 
-Each link has a maximum bend angle of 45&deg;, so the mininium radius is proportional to the link length.
+Each link has a maximum bend angle of 45&deg;, so the minimum radius is proportional to the link length.
 
 The travel property is how far it can move in each direction, i.e. half the maximum travel if the chain is mounted in the middle of the travel.
 
@@ -4633,7 +4844,7 @@ to the assembly, for example to add inserts.
 ---
 <a name="Fan_guard"></a>
 ## Fan_guard
-Pintable fan finger guard to match the specified fan. To be `include`d, not `use`d.
+Printable fan finger guard to match the specified fan. To be `include`d, not `use`d.
 
 The ring spacing as well as the number of spokes can be specified, if zero a gasket is generated instead of a guard.
 
@@ -4778,7 +4989,7 @@ This allows the hinges and one set of screws to belong to one assembly and the o
 | `hinge_depth(type)` | Depth of each leaf |
 | `hinge_knuckle_dia(type)` | The knuckle diameter |
 | `hinge_knuckles(type)` | How many knuckles |
-| `hinge_margin(type)` | How far to keep the screws from the knuckes |
+| `hinge_margin(type)` | How far to keep the screws from the knuckles |
 | `hinge_pin_dia(type)` | The pin diameter |
 | `hinge_screw(type)` | Screw type to mount it |
 | `hinge_screws(type)` | How many screws |
@@ -5226,6 +5437,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 | `psu_shroud_extent(type)` | How far it extends beyond the PSU to clear the connections |
 | `psu_shroud_height(type)` | Outside height |
 | `psu_shroud_screw(type)` | Screw used to fasten |
+| `psu_shroud_wall(type)` | The wall thickness |
 | `psu_shroud_width(type)` | Outside width of the shroud |
 
 ### Modules
@@ -5234,7 +5446,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 | `psu_shroud(type, cable_d, name, cables = 1)` | Generate the STL file for a specified ssr and cable |
 | `psu_shroud_assembly(type, cable_d, name, cables = 1)` | The printed parts with inserts fitted |
 | `psu_shroud_cable_positions(type, cable_d, cables = 1)` | Place children at the cable tie positions |
-| `psu_shroud_fastened_assembly(type, cable_d, thickness, name, cables = 1)` | Assembly with screws in place |
+| `psu_shroud_fastened_assembly(type, cable_d, thickness, name, cables = 1, screw = screw)` | Assembly with screws in place |
 | `psu_shroud_hole_positions(type)` | Place children at the screw hole positions |
 | `psu_shroud_holes(type, cable_d, cables = 1)` | Drill the screw and ziptie holes |
 
@@ -5247,7 +5459,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 |   6 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   6 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   6 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
-|   3 | `ziptie(small_ziptie, 3)` |  Ziptie 2.5mm x 100mm min length |
+|   3 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |
@@ -5449,7 +5661,7 @@ The STL and assembly must be given a name and parameterless wrappers for the stl
 |   4 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   4 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   4 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
-|   4 | `ziptie(small_ziptie, 3)` |  Ziptie 2.5mm x 100mm min length |
+|   4 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |
@@ -5642,8 +5854,8 @@ allows flexible positioning of the motors.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false)` | Wrapper module to draw both belts of a coreXY setup |
-| `coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false)` | Draw the coreXY belts |
+| `coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false, left_lower = false)` | Wrapper module to draw both belts of a coreXY setup |
+| `coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false, left_lower = false)` | Draw the coreXY belts |
 | `coreXY_half(type, size, pos, separation_y = 0, x_gap = 0, plain_idler_offset = 0, drive_pulley_offset = [0, 0], show_pulleys = false, lower_belt = false, hflip = false)` | Draw one belt of a coreXY setup |
 
 ![core_xy](tests/png/core_xy.png)
@@ -6043,7 +6255,7 @@ A sector of a circle between two angles.
 ---
 <a name="Sweep"></a>
 ## Sweep
-Utility to generate a polhedron by sweeping a 2D profile along a 3D path and utilities for generating paths.
+Utility to generate a polyhedron by sweeping a 2D profile along a 3D path and utilities for generating paths.
 
 The initial orientation is the Y axis of the profile points towards the initial center of curvature, Frenet-Serret style.
 Subsequent rotations use the minimum rotation method.
@@ -6136,7 +6348,7 @@ Simple tube or ring
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `rectangular_tube(size, center = true, thickness = 1, fillet = 0.5)` | Create a retangular tube with filleted corners |
+| `rectangular_tube(size, center = true, thickness = 1, fillet = 0.5)` | Create a rectangular tube with filleted corners |
 | `ring(or, ir)` | Create a ring with specified external and internal radii |
 | `tube(or, ir, h, center = true)` | Create a tube with specified external and internal radii and height `h` |
 | `woven_tube(or, ir, h, center= true, colour = grey(30)` | Create a woven tube with specified external and internal radii, height `h`, colours, warp and weft |
@@ -6160,7 +6372,7 @@ Setting the `ngb` parameter of `assembly` to `true` removes its column from the
 This is to prevent the global BOM page becoming too wide in large projects by having it include just the major assemblies.
 
 The example below shows how to define a vitamin and incorporate it into an assembly with sub-assemblies and make an exploded view.
-The resulting flat BOM is shown but heirachical BOMs are also generated for real projects.
+The resulting flat BOM is shown but hierarchical BOMs are also generated for real projects.
 
 If the code to make an STL or DXF is made a child of the `stl()` or `dxf()` module then the STL or DXF will be used in the assembly views generated by `views.py` instead of generating
 it with code.
@@ -6240,7 +6452,7 @@ The `pose()` module allows assembly views in the readme to be posed differently
 ---
 <a name="Clip"></a>
 ## Clip
-Construct arbirarily large box to partition 3D space and clip objects, useful for creating cross sections to see the inside when debugging.
+Construct arbitrarily large box to partition 3D space and clip objects, useful for creating cross sections to see the inside when debugging.
 
 Original version by Doug Moen on the OpenSCAD forum
 
@@ -6318,7 +6530,7 @@ This can be used to mitigate the number of sides being small and make small hole
 large increase in the number of facets.
 When set to 1 the polygons alternate each layer, when set higher the rotation takes `twist + 1` layers to repeat.
 A small additional rotation is added to make the polygon rotate one more side over the length of the hole to make it appear round when
-veiwed end on.
+viewed end on.
 
 When `twist` is set the resulting cylinder is extended by `eps` at each end so that the exact length of the hole can be used without
 leaving a scar on either surface.
@@ -6332,7 +6544,7 @@ leaving a scar on either surface.
 |:--- |:--- |
 | `corrected_diameter(d, n = undef)` | Adjusted diameter to make flats lie on the circle |
 | `corrected_radius(r, n = undef)` | Adjusted radius to make flats lie on the circle |
-| `sides(r, n = undef)` | Optimium number of sides for specified radius |
+| `sides(r, n = undef)` | Optimum number of sides for specified radius |
 
 ### Modules
 | Module | Description |

scripts/bom.py

@@ -31,6 +31,12 @@ from set_config import *
 import json
 import re
 
+try:
+    import parts
+    got_parts_py = True
+except:
+    got_parts_py = False
+
 def find_scad_file(mname):
     for filename in os.listdir(source_dir):
         if filename[-5:] == ".scad":
@@ -46,6 +52,18 @@ def find_scad_file(mname):
                             return filename
     return None
 
+def main_assembly(target):
+    file = None
+    if target:
+        assembly = target + "_assembly"
+        file = find_scad_file(assembly)
+    if not file:
+        assembly = "main_assembly"
+        file = find_scad_file(assembly)
+    if not file:
+        raise Exception("can't find source for " + assembly)
+    return assembly, file
+
 class Part:
     def __init__(self, args):
         self.count = 1
@@ -117,6 +135,33 @@ class BOM:
             return ass
         return ass.replace("assembly", "assemblies")
 
+    def print_CSV(self,  file = None):
+        i = 0
+        for part in sorted(self.vitamins):
+            i += 1
+            if ': ' in part:
+                part_no, description = part.split(': ')
+            else:
+                part_no, description = "", part
+            qty = self.vitamins[part].count
+            if got_parts_py:
+                match = re.match(r'^.*\((.*?)[,\)].*$', part_no)
+                if match and not match.group(1).startswith('"'):
+                    part_no = part_no.replace('(' + match.group(1), '_' + match.group(1) + '(').replace('(, ', '(')
+                func = 'parts.' + part_no.replace('(', '(%d, ' % qty).replace(', )', ')')
+                func = func.replace('true',  'True').replace('false', 'False').replace('undef', 'None')
+                try:
+                    price, url = eval(func)
+                    print("'%s',%3d,%.2f,'=B%d*C%d',%s" % (description, qty, price, i, i, url), file=file)
+                except:
+                    if part_no:
+                        print("%s not found in parts.py" % func)
+                    print("'%s',%3d" % (description, qty), file=file)
+            else:
+                print("'%s',%3d" % (description, qty), file=file)
+        if got_parts_py:
+            print(",'=SUM(B1:B%d)',,'=SUM(D1:D%d)'" %(i, i), file=file)
+
     def print_bom(self, breakdown, file = None):
         if self.vitamins:
             print("Vitamins:", file=file)
@@ -221,28 +266,20 @@ def parse_bom(file = "openscad.log", name = None):
     return main
 
 def usage():
-    print("\nusage:\n\tbom [target_config] [<accessory_name>_assembly] - Generate BOMs for a project or an accessory to a project.")
+    print("\nusage:\n\tbom [target_config] - Generate BOMs for a project.")
     sys.exit(1)
 
-def boms(target = None, assembly = None):
+def boms(target = None):
     try:
         bom_dir = set_config(target, usage) + "bom"
-        if assembly:
-            bom_dir += "/accessories"
-            if not os.path.isdir(bom_dir):
-                os.makedirs(bom_dir)
-        else:
-            assembly = "main_assembly"
-            if os.path.isdir(bom_dir):
-                shutil.rmtree(bom_dir)
-                sleep(0.1)
-            os.makedirs(bom_dir)
+        if os.path.isdir(bom_dir):
+            shutil.rmtree(bom_dir)
+            sleep(0.1)
+        os.makedirs(bom_dir)
         #
-        # Find the scad file that makes the module
+        # Find the scad file that makes the main assembly
         #
-        scad_file = find_scad_file(assembly)
-        if not scad_file:
-            raise Exception("can't find source for " + assembly)
+        assembly, scad_file = main_assembly(target)
         #
         # make a file to use the module
         #
@@ -259,8 +296,9 @@ def boms(target = None, assembly = None):
 
         main = parse_bom("openscad.echo", assembly)
 
-        if assembly == "main_assembly":
-            main.print_bom(True, open(bom_dir + "/bom.txt","wt"))
+        main.print_bom(True, open(bom_dir + "/bom.txt","wt"))
+
+        main.print_CSV(open(bom_dir + "/bom.csv","wt"))
 
         for ass in main.assemblies:
             with open(bom_dir + "/" + ass + ".txt", "wt") as f:
@@ -278,20 +316,8 @@ def boms(target = None, assembly = None):
         sys.exit(1)
 
 if __name__ == '__main__':
-    if len(sys.argv) > 3: usage()
+    if len(sys.argv) > 2: usage()
 
-    if len(sys.argv) == 3:
-        target, assembly = sys.argv[1], sys.argv[2]
-    else:
-        if len(sys.argv) == 2:
-            if sys.argv[1][-9:] == "_assembly":
-                target, assembly = None, sys.argv[1]
-            else:
-                target, assembly = sys.argv[1], None
-        else:
-            target, assembly = None, None
+    target = sys.argv[1] if len(sys.argv) == 2 else None
 
-    if assembly:
-        if assembly[-9:] != "_assembly": usage()
-
-    boms(target, assembly)
+    boms(target)

scripts/changelog.py

@@ -24,6 +24,7 @@ from __future__ import print_function
 import sys
 import subprocess
 import re
+from tests import do_cmd
 
 filename = 'CHANGELOG.md'
 
@@ -162,3 +163,4 @@ if __name__ == '__main__':
 
             if not c.comment.startswith('Merge branch') and not c.comment.startswith('Merge pull') and not re.match(r'U..ated changelog.*', c.comment):
                 print('* %s [`%s`](%s "show commit") %s %s\n' % (c.date, c.hash[:7], url + '/commit/' + c.hash, initials(c.author), fixup_comment(c.comment, url)), file = file)
+    do_cmd(('codespell -w -L od ' + filename).split())

scripts/options.py

@@ -17,7 +17,7 @@
 # If not, see <https://www.gnu.org/licenses/>.
 #
 
-# Set command line options from enviroment variables and check if they have changed
+# Set command line options from environment variables and check if they have changed
 
 import json, os, deps
 from colorama import Fore, init

scripts/tests.py

@@ -173,7 +173,7 @@ def tests(tests):
                     impl_name = None
 
             if libtest:
-                vsplit = "AJR" + chr(ord('Z') + 1)
+                vsplit = "AIR" + chr(ord('Z') + 1)
                 vtype = locations[0][1]
                 types = [vtype + ' ' + vsplit[i] + '-' + chr(ord(vsplit[i + 1]) - 1) for i in range(len(vsplit) - 1)] + [loc[1] for loc in locations[1 :]]
                 if type == vtype:

scripts/views.py

@@ -77,12 +77,12 @@ def bom_to_assemblies(bom_dir, bounds_map):
     #
     if flat_bom:
         ass = flat_bom[-1]
-        if len(ass["assemblies"]) < 2 and not ass["vitamins"] and not ass["printed"] and not ass["routed"]:
+        if len(ass["assemblies"]) == 1 and not ass["vitamins"] and not ass["printed"] and not ass["routed"]:
             flat_bom = flat_bom[:-1]
     return [assembly["name"] for  assembly in flat_bom]
 
 def eop(doc_file, last = False, first = False):
-    print('<span></span>', file = doc_file)     # An invisable marker for page breaks because markdown takes much longer if the document contains a div
+    print('<span></span>', file = doc_file)     # An invisible marker for page breaks because markdown takes much longer if the document contains a div
     if not first:
         print('[Top](#TOP)', file = doc_file)
     if not last:
@@ -161,6 +161,7 @@ def views(target, do_assemblies = None):
     # Find all the scad files
     #
     main_blurb = None
+    main_assembly, main_file = bom.main_assembly(target)
     pngs = []
     for dir in source_dirs(bom_dir):
         if os.path.isdir(dir):
@@ -232,7 +233,7 @@ def views(target, do_assemblies = None):
                                                 update_image(tmp_name, tn_name)
                                     done_assemblies.append(real_name)
                                 else:
-                                    if module == 'main_assembly':
+                                    if module == main_assembly:
                                         main_blurb = blurb.scrape_module_blurb(lines[:line_no])
                         line_no += 1
     #
@@ -246,9 +247,6 @@ def views(target, do_assemblies = None):
         project = ' '.join(word[0].upper() + word[1:] for word in os.path.basename(os.getcwd()).split('_'))
         print('<a name="TOP"></a>', file = doc_file)
         print('# %s' % project, file = doc_file)
-        main_file = bom.find_scad_file('main_assembly')
-        if not main_file:
-            raise Exception("can't find source for main_assembly")
         text = blurb.scrape_blurb(source_dir + '/' + main_file)
         blurbs = blurb.split_blurb(text)
         if len(text):

tests/BLDC_motors.scad

@@ -0,0 +1,31 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/bldc_motors.scad>
+
+module bldc_motors()
+    layout([for(b = bldc_motors) BLDC_diameter(b)])
+        rotate(-90)
+            BLDC(bldc_motors[$i]);
+
+if($preview)
+    let($show_threads = 1)
+        bldc_motors();

tests/BOM.scad

@@ -20,10 +20,10 @@
 //
 //! BOM and assembly demonstration
 //
+$explode = 1; // Normally set on the command line when generating assembly views with views.py
 include <../core.scad>
 include <../vitamins/sheets.scad>
 use <../vitamins/insert.scad>
-$explode = 1; // Normally set on the command line when generating assembly views with views.py
 
 screw = M3_cap_screw;
 sheet = PMMA3;

tests/LDRs.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 include <../vitamins/ldrs.scad>
 
 use <../utils/layout.scad>

tests/PCB.scad

@@ -64,21 +64,25 @@ test_pcb = ["TestPCB", "Test PCB",
         [ 16,  2,   90, "smd_res", RES1206, "1K"],
         [ 19,  2,   90, "smd_res", RES0805, "1K"],
         [ 22,  2,   90, "smd_res", RES0603, "1K"],
+        [ 25,  2,   90, "smd_cap", CAP1206, 1.5],
+        [ 28,  2,   90, "smd_cap", CAP0805, 1.0],
+        [ 31,  2,   90, "smd_cap", CAP0603, 0.7],
+
         [ 10,  10,   0, "2p54header", 4, 1],
         [ 25,  10,   0, "2p54header", 5, 1, false, "blue" ],
         [ 10,  20,   0, "2p54boxhdr", 4, 2],
         [ 10,  30,   0, "2p54socket", 6, 1],
         [ 25,  30,   0, "2p54socket", 4, 1, false, 0, false, "red" ],
-        [ 10,  40,   0, "chip", 10, 5, 1, grey(20)],
-        [  5,  50,   0, "led", LED3mm, "red"],
-        [ 12,  50,   0, "led", LED5mm, "orange"],
-        [ 25,  50,   0, "led", LED10mm, "yellow"],
-        [ 10,  65, 180, "rj45"],
-        [  8,  85, 180, "usb_A"],
+        [ 65,  50,   0, "led", LED3mm, "red"],
+        [ 75,  50,   0, "led", LED5mm, "orange"],
+        [ 90,  50,   0, "led", LED10mm, "yellow"],
+        [ 10,  45, 180, "rj45"],
+        [  8,  65, 180, "usb_A"],
         [  8, 105, 180, "usb_Ax2"],
+        [  7,  85, 180, "molex_usb_Ax1"],
+        [ 8.5,125, 180, "molex_usb_Ax2"],
         [  3, 140, 180, "usb_uA"],
         [  8, 155, 180, "usb_B"],
-        [  8.5, 125, 180, "molex_usb_Ax2"],
         [ 25, 200,   0, "buzzer", 4.5, 8.5],
         [ 25, 218,   0, "buzzer"],
         [  8, 190, 180, "jack"],
@@ -127,6 +131,8 @@ test_pcb = ["TestPCB", "Test PCB",
         [ 52, 200,   0, "pcb", 11, TMC2130 ],
         [ 80, 200,   0, "pdip", 24, "27C32", true, inch(0.6) ],
         [ 80, 170,   0, "pdip", 8, "NE555" ],
+        [ 80, 150,   0, "chip", 10, 5, 1, grey(20)],
+
         [ 52, 206,   0, "2p54socket", 8, 1 ],
         [ 52, 194,   0, "2p54socket", 8, 1, false, 0, false, "red" ],
         [ 50, 220,   0, "standoff",  5, 4.5, 12.5, 2.54],

tests/PCBs.scad

@@ -29,7 +29,12 @@ module pcbs() {
             rotate(90)
                 pcb_assembly(pcbs[$i], 5 + $i, 3);
 
-    translate([0, 110])
+    translate([0, 45])
+        layout([for(p = tiny_pcbs) pcb_length(p)], 3)
+            translate([0, pcb_width(tiny_pcbs[$i]) / 2])
+                 pcb_assembly(tiny_pcbs[$i], 5 + $i, 3);
+
+    translate([0, 120])
         layout([for(p = perfboards) pcb_length(p)], 10)
             translate([0, -pcb_width(perfboards[$i]) / 2])
                 pcb_assembly(perfboards[$i], 5 + $i, 3);

tests/SK_brackets.scad

@@ -22,18 +22,20 @@ include <../vitamins/extrusions.scad>
 
 use <../utils/layout.scad>
 
-module sk_brackets() {
+module sk_brackets(examples = false) {
     screws = [M4_dome_screw, M4_cap_screw, M5_cap_screw, M5_cap_screw];
     nuts = [M4_hammer_nut, M4_sliding_t_nut, M5_sliding_t_nut, undef];
     // channel depth = 6 for 2020 extrusion, 9 for 3030 extrusion
     depths = [6, 6, 9, 0];
     layout([for(s = sk_brackets) 1.5 * sk_size(s)[1]]) {
         sk_bracket_assembly(sk_brackets[$i], screw_type = screws[$i], nut_type = nuts[$i], max_screw_depth = depths[$i]);
-        translate([0, -sk_hole_offset(sk_brackets[$i]) - extrusion_width($i < 2 ? E2020 : E3030) / 2, 0])
-            rotate([0, 90, 0])
-                extrusion($i < 2 ? E2020 : E3030, 20, false);
+
+        if(examples)
+            translate([0, -sk_hole_offset(sk_brackets[$i]) - extrusion_width($i < 2 ? E2020 : E3030) / 2, 0])
+                rotate([0, 90, 0])
+                    extrusion($i < 2 ? E2020 : E3030, 20, false);
     }
 }
 
 if($preview)
-    sk_brackets();
+    sk_brackets(true);

tests/SMDs.scad

@@ -28,6 +28,11 @@ module smds() {
     translate([0, 3])
         layout([for(l = smd_leds) smd_led_size(l).x], 1)
             smd_led(smd_leds[$i], ["green", "blue", "red"][$i % 3]);
+
+    translate([0, 6])
+        layout([for(c = smd_capacitors) smd_cap_size(c).x], 1)
+            let(c = smd_capacitors[$i])
+                smd_capacitor(c, smd_cap_size(c).y * 0.8);
 }
 
 if($preview)

tests/ball_bearings.scad

@@ -16,7 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
-
+include <../core.scad>
 use <../utils/layout.scad>
 
 include <../vitamins/ball_bearings.scad>

tests/box_sections.scad

@@ -0,0 +1,30 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../utils/core/core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/box_sections.scad>
+
+module box_sections() {
+    layout([for(b = box_sections) box_section_size(b).x], 20)
+        box_section(box_sections[$i], 100);
+}
+
+if($preview)
+    box_sections();

tests/displays.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../utils/layout.scad>
 
 include <../vitamins/displays.scad>
@@ -23,7 +24,8 @@ use <../vitamins/pcb.scad>
 
 module displays()
     layout([for(d = displays) pcb_length(display_pcb(d))], 10)
-        display(displays[$i]);
+        vflip()
+            display(displays[$i]);
 
 if($preview)
     displays();

tests/geared_steppers.scad

@@ -16,12 +16,13 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 include <../vitamins/geared_steppers.scad>
 
 use <../utils/layout.scad>
 
 module geared_steppers()
-    layout([for(g = geared_steppers) gs_diameter(g)], 5)
+    layout([for(g = geared_steppers) max(gs_diameter(g), gs_pitch(g) + gs_lug_w(g) / 2)], 5)
         geared_stepper(geared_steppers[$i]);
 
 geared_steppers();

tests/green_terminals.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../utils/layout.scad>
 
 include <../vitamins/green_terminals.scad>

tests/hygrometer.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../vitamins/hygrometer.scad>
 
 if($preview)

tests/microview.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../vitamins/microview.scad>
 
 microview(!$preview);

tests/o_ring.scad

@@ -16,6 +16,7 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 use <../vitamins/o_ring.scad>
 
 module o_rings()

tests/pin_headers.scad

@@ -64,8 +64,9 @@ module pin_headers() {
             pin_socket(pin_headers[$i], 3, 3, right_angle = true);
     }
 
-    for(i = [0, 1], p = [5, 2][i], j = [0 , 1]) {
-        h = [jst_ph_header, jst_xh_header][j];
+    headers = [jst_zh_header, jst_ph_header, jst_xh_header];
+    for(i = [0, 1], p = [5, 2][i], j = [0 : len(headers) - 1]) {
+        h = headers[j];
         translate([-20 * (i + 1), 0 + j * 40])
             jst_xh_header(h, p);
 

tests/press_fit.scad

@@ -16,8 +16,8 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
-
-include <../printed/press_fit.scad>
+include <../core.scad>
+use <../printed/press_fit.scad>
 
 module press_fits()
 {

tests/rails.scad

@@ -29,7 +29,7 @@ pos = 1; //[-1 : 0.1 : 1]
 function rail_carriages(rail) = [for(c = carriages) if(carriage_rail(c) == rail) c];
 
 module rails()
-    layout([for(r = rails) carriage_width(rail_carriages(r)[0])], 20)
+    layout([for(r = rails) carriage_width(rail_carriages(r)[0])], 10)
         rotate(-90) {
             rail = rails[$i];
             carriages = rail_carriages(rail);
@@ -50,8 +50,6 @@ module rails()
                 translate_z(-sheet)
                     vflip()
                         nut_and_washer(nut, true);
-
-            echo(rail[0], (length - (rail_holes(rail, length) - 1) * rail_pitch(rail)) / 2);
          }
 
 if($preview)

tests/screws.scad

@@ -48,7 +48,7 @@ module screws() {
         for(x = [0 : len(screw_lists[y]) -1]) {
             screw = screw_lists[y][x];
             if(screw) {
-                 length = screw_head_type(screw) == hs_grub ? 6
+                 length = screw_head_type(screw) == hs_grub ? screw_radius(screw) * 4
                         : screw_radius(screw) <= 1.5 ? 10
                         : screw_max_thread(screw) ? screw_longer_than(screw_max_thread(screw) + 5)
                         : 30;

tests/servo_motors.scad

@@ -0,0 +1,31 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/servo_motors.scad>
+
+module servo_motors()
+    layout([for(s = servo_motors) servo_motor_width(s)], 10) let(s = servo_motors[$i]) {
+        rotate(-90)             // Show the keyway
+            servo_motor(s);
+    }
+
+if($preview)
+    servo_motors();

tests/stepper_motors.scad

@@ -22,12 +22,12 @@ include <../vitamins/stepper_motors.scad>
 use <../utils/layout.scad>
 
 module stepper_motors()
-    layout([for(s = stepper_motors) NEMA_width(s)], 5, no_offset = true) let(m = stepper_motors[$i]) {
+    layout([for(s = stepper_motors) NEMA_width(s)], 5, no_offset = false) let(m = stepper_motors[$i]) {
         rotate(180)
-            NEMA(m, 0, m == NEMA17P || m == NEMA17M || m == NEMA17M8);
+            NEMA(m, 0, in([NEMA17P, NEMA17M, NEMA17M8, NEMA8, NEMA8BH], m));
 
         translate_z(4)
-            NEMA_screws(m, M3_pan_screw, n = $i, earth = $i > 4 ? undef : $i - 1);
+            NEMA_screws(m, M3_pan_screw, n = $i - 2, earth = $i > 6 ? undef : $i - 3);
     }
 
 if($preview)

utils/core/bom.scad

@@ -29,7 +29,7 @@
 //! This is to prevent the global BOM page becoming too wide in large projects by having it include just the major assemblies.
 //!
 //! The example below shows how to define a vitamin and incorporate it into an assembly with sub-assemblies and make an exploded view.
-//! The resulting flat BOM is shown but heirachical BOMs are also generated for real projects.
+//! The resulting flat BOM is shown but hierarchical BOMs are also generated for real projects.
 //!
 //! If the code to make an STL or DXF is made a child of the `stl()` or `dxf()` module then the STL or DXF will be used in the assembly views generated by `views.py` instead of generating
 //! it with code.

utils/core/clip.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! Construct arbirarily large box to partition 3D space and clip objects, useful for creating cross sections to see the inside when debugging.
+//! Construct arbitrarily large box to partition 3D space and clip objects, useful for creating cross sections to see the inside when debugging.
 //!
 //! Original version by Doug Moen on the OpenSCAD forum
 //

utils/core/polyholes.scad

@@ -28,12 +28,12 @@
 //! large increase in the number of facets.
 //! When set to 1 the polygons alternate each layer, when set higher the rotation takes `twist + 1` layers to repeat.
 //! A small additional rotation is added to make the polygon rotate one more side over the length of the hole to make it appear round when
-//! veiwed end on.
+//! viewed end on.
 //!
 //! When `twist` is set the resulting cylinder is extended by `eps` at each end so that the exact length of the hole can be used without
 //! leaving a scar on either surface.
 //
-function sides(r, n = undef) = is_undef(n) ? max(round(4 * r), 3) : n ? max(n, 3) : r2sides(r); //! Optimium number of sides for specified radius
+function sides(r, n = undef) = is_undef(n) ? max(round(4 * r), 3) : n ? max(n, 3) : r2sides(r); //! Optimum number of sides for specified radius
 function corrected_radius(r, n = undef)   = r / cos(180 / sides(r, n));                         //! Adjusted radius to make flats lie on the circle
 function corrected_diameter(d, n = undef) = 2 * corrected_radius(d / 2 , n);                    //! Adjusted diameter to make flats lie on the circle
 

utils/core/teardrops.scad

@@ -26,7 +26,7 @@
 //
 module teardrop(h, r, center = true, truncate = true, chamfer = 0, chamfer_both_ends = true, plus = false) { //! For making horizontal holes that don't need support material, set `truncate = false` to make traditional RepRap teardrops that don't even need bridging
     module teardrop_2d(r, truncate) {
-        er = layer_height / 2 - eps;    // Extrustion edge radius
+        er = layer_height / 2 - eps;    // Extrusion edge radius
         R = plus ? r + er : r;          // Corrected radius
         offset = plus ? -er : 0;        // Offset inwards
         hull()

utils/core_xy.scad

@@ -180,24 +180,25 @@ module coreXY_half(type, size, pos, separation_y = 0, x_gap = 0, plain_idler_off
         tooth_colour = lower_belt ? coreXY_lower_tooth_colour(type) : coreXY_upper_tooth_colour(type));
 }
 
-module coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false) { //! Wrapper module to draw both belts of a coreXY setup
+module coreXY(type, size, pos, separation, x_gap, plain_idler_offset = 0, upper_drive_pulley_offset, lower_drive_pulley_offset, show_pulleys = false, left_lower = false) { //! Wrapper module to draw both belts of a coreXY setup
     translate([size.x / 2 - separation.x / 2, size.y / 2, -separation.z / 2]) {
         // lower belt
-        hflip()
+        hflip(!left_lower)
             explode(25)
-                coreXY_half(type, size, [size.x - pos.x - separation.x, pos.y], separation.y, x_gap, plain_idler_offset, [-lower_drive_pulley_offset.x, lower_drive_pulley_offset.y], show_pulleys, lower_belt = true, hflip = true);
+                coreXY_half(type, size, [size.x - pos.x - separation.x/2 - (left_lower ? x_gap : 0), pos.y], separation.y, x_gap, plain_idler_offset, [-lower_drive_pulley_offset.x, lower_drive_pulley_offset.y], show_pulleys, lower_belt = true, hflip = true);
 
         // upper belt
         translate([separation.x, 0, separation.z])
-            explode(25)
-                coreXY_half(type, size, [pos.x, pos.y], separation.y, x_gap, plain_idler_offset, upper_drive_pulley_offset, show_pulleys, lower_belt = false, hflip=false);
+            hflip(left_lower)
+                explode(25)
+                    coreXY_half(type, size, [pos.x + separation.x/2 + (left_lower ? x_gap : 0), pos.y], separation.y, x_gap, plain_idler_offset, upper_drive_pulley_offset, show_pulleys, lower_belt = false, hflip = false);
     }
 }
 
-module coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false) { //! Draw the coreXY belts
+module coreXY_belts(type, carriagePosition, coreXYPosBL, coreXYPosTR, separation, x_gap = 20, upper_drive_pulley_offset = [0, 0], lower_drive_pulley_offset = [0, 0], show_pulleys = false, left_lower = false) { //! Draw the coreXY belts
     assert(coreXYPosBL.z == coreXYPosTR.z);
 
     coreXYSize = coreXYPosTR - coreXYPosBL;
     translate(coreXYPosBL)
-        coreXY(type, coreXYSize, [carriagePosition.x - coreXYPosBL.x + separation.x / 2, carriagePosition.y - coreXYPosBL.y], separation = separation, x_gap = x_gap, plain_idler_offset = 0, upper_drive_pulley_offset = upper_drive_pulley_offset, lower_drive_pulley_offset = lower_drive_pulley_offset, show_pulleys = show_pulleys);
+        coreXY(type, coreXYSize, [carriagePosition.x - coreXYPosBL.x, carriagePosition.y - coreXYPosBL.y], separation = separation, x_gap = x_gap, plain_idler_offset = 0, upper_drive_pulley_offset = upper_drive_pulley_offset, lower_drive_pulley_offset = lower_drive_pulley_offset, show_pulleys = show_pulleys, left_lower = left_lower);
 }

utils/gears.scad

@@ -135,4 +135,4 @@ function involute_worm_profile(m, pa = 20, clearance = undef) = //! Calculate wo
     let(tooth = involute_rack_tooth_profile(m),
         pitch = PI * m,
         y_min = min([for(p = tooth) p.y])
-    ) [for(p = tooth) [p.x - pitch / 2, p.y - y_min, 0]];   // Offset to be positive in y, centred in x and add 0 z ordintate
+    ) [for(p = tooth) [p.x - pitch / 2, p.y - y_min, 0]];   // Offset to be positive in y, centred in x and add 0 z coordinate

utils/rounded_polygon.scad

@@ -75,28 +75,28 @@ function rounded_polygon_length(points, tangents) = //! Calculate the length giv
 module rounded_polygon(points, _tangents = undef) { //! Draw the rounded polygon from the point list, can pass the tangent list to save it being calculated
     len = len(points);
     indices = [0 : len - 1];
-    tangents = [ for (t = _tangents ? _tangents : rounded_polygon_tangents(points)) each [t.x, t.y] ];
+    tangents = _tangents ? _tangents : rounded_polygon_tangents(points);
 
-    difference(convexity = points) {
+    difference() {
         union() {
-            for(i = indices)
+            for(i = indices, last = (i - 1 + len) % len)
                 if(points[i][2] > 0)
                     hull() {
-                        translate([points[i].x, points[i].y])
+                        translate(vec2(points[i]))
                             circle(points[i][2]);
 
-                        polygon([tangents[(2 * i - 1 + 2 * len) % (2 * len)], tangents[2 * i], [points[i].x, points[i].y]]);
+                        polygon([vec2(tangents[last][1]), vec2(tangents[i][0]), vec2(points[i])]);
                     }
 
-            polygon(tangents, convexity = points);
+            polygon([for(t = tangents) each(vec2(t))], convexity = points);
         }
-        for(i = indices)
+        for(i = indices, last = (i - 1 + len) % len)
             if(points[i][2] < 0)
                 hull() {
-                    translate([points[i].x, points[i].y])
+                    translate(vec2(points[i]))
                         circle(-points[i][2]);
 
-                    polygon([tangents[(2 * i - 1 + 2 * len) % (2 * len)], tangents[2 * i], [points[i].x, points[i].y]]);
+                    polygon([vec2(tangents[last][1]), vec2(tangents[i][0]), vec2(points[i])]);
                 }
      }
 }

utils/sweep.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! Utility to generate a polhedron by sweeping a 2D profile along a 3D path and utilities for generating paths.
+//! Utility to generate a polyhedron by sweeping a 2D profile along a 3D path and utilities for generating paths.
 //!
 //! The initial orientation is the Y axis of the profile points towards the initial center of curvature, Frenet-Serret style.
 //! Subsequent rotations use the minimum rotation method.

utils/thread.scad

@@ -50,6 +50,7 @@ function thread_profile(h, crest, angle, overlap = 0.1) = //! Create thread prof
         [[-base / 2, -overlap, 0], [-crest / 2, h, 0], [crest / 2, h, 0], [base / 2, -overlap, 0]];
 
 module thread(dia, pitch, length, profile, center = true, top = -1, bot = -1, starts = 1, solid = true, female = false, colour = undef) { //! Create male or female thread, ends can be tapered, chamfered or square
+    assert(is_undef(colour) || is_list(colour), "Thread colour must be in [r, g, b] form");
     //
     // Apply colour if defined
     //
@@ -155,7 +156,7 @@ module thread(dia, pitch, length, profile, center = true, top = -1, bot = -1, st
                                         translate([0, offset])
                                             square([r, len]);
 
-                                        translate([0, bot_chamfer_h])
+                                        translate([0, offset + bot_chamfer_h])
                                             square([r + h + overlap, len - top_chamfer_h - bot_chamfer_h]);
                                     }
                                     if(!solid)
@@ -190,7 +191,8 @@ module female_metric_thread(d, pitch, length, center = true, top = -1, bot = -1,
 }
 
 function metric_coarse_pitch(d) //! Convert metric diameter to pitch
-    = d == 1.6 ? 0.35  // M1.6
+    = d == 1.4 ? 0.3   // M1.4
+    : d == 1.6 ? 0.35  // M1.6
                : [0.4, // M2
                   0.45,// M2.5
                   0.5, // M3

utils/tube.scad

@@ -25,7 +25,9 @@ include <../utils/core/core.scad>
 module ring(or, ir) //! Create a ring with specified external and internal radii
         difference() {
             circle4n(or);
-            circle4n(ir);
+
+            if(ir > 0)
+                circle4n(ir);
         }
 
 module tube(or, ir, h, center = true) //! Create a tube with specified external and internal radii and height `h`
@@ -69,7 +71,7 @@ module woven_tube(or, ir, h, center= true, colour = grey(30), colour2, warp = 2,
     }
 }
 
-module rectangular_tube(size, center = true, thickness = 1, fillet = 0.5) { //! Create a retangular tube with filleted corners
+module rectangular_tube(size, center = true, thickness = 1, fillet = 0.5) { //! Create a rectangular tube with filleted corners
     extrude_if(size.z, center = center)
         difference() {
             rounded_square([size.x, size.y], fillet);

vitamins/belt.scad

@@ -19,21 +19,21 @@
 
 //
 //! Models timing belt running in a path over toothed or smooth pulleys and calculates an accurate length.
-//! Only models 2D paths, belt may twist to support crossed belt core XY and other designes where the belt twists!
+//! Only models 2D paths, belt may twist to support crossed belt core XY and other designs where the belt twists!
 //!
 //! By default the path is a closed loop. An open loop can be specified by specifying `open=true`, and in that case the start and end points are not connected, leaving the loop open.
 //!
 //! To get a 180 degree twist of the loop, you can use the `twist` argument. `Twist` can be a single number, and in that case the belt will twist after
 //! the position with that number. Alternatively `twist` can be a list of boolean values with a boolean for each position; the belt will then twist after
 //! the position that have a `true` value in the `twist` list. If the path is specified with pulley/idler types, then you can use `auto_twist=true`; in
-//! that case the belt will automatically twist so the back of the belt always runs against idlers and the tooth side runs against pullies. If you use
+//! that case the belt will automatically twist so the back of the belt always runs against idlers and the tooth side runs against pulleys. If you use
 //! `open=true` then you might also use `start_twist=true` to let the belt start the part with the back side out.
 //!
-//! The path must be specified as a list of positions. Each position should be either a vector with `[x, y, pulley]` or `[x, y, r]`. A pully is a type from
+//! The path must be specified as a list of positions. Each position should be either a vector with `[x, y, pulley]` or `[x, y, r]`. A pulley is a type from
 //! `pulleys.scad`, and correct radius and angle will automatically be calculated. Alternatively a radius can be specified directly.
 //!
 //! To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
-//! Alternativley you can just specify smooth pulleys in the path, and it will then happen automatically.
+//! Alternatively you can just specify smooth pulleys in the path, and it will then happen automatically.
 //!
 //! Individual teeth are not drawn, instead they are represented by a lighter colour.
 //
@@ -60,7 +60,7 @@ module belt(type, points, belt_colour = grey(20), tooth_colour = grey(50), open
     info = _belt_points_info(type, points, open, twist, auto_twist, start_twist);
     dotwist = info[0]; // array of booleans, true if a twist happen after the position
     twisted = info[1]; // array of booleans, true if the belt is twisted at the position
-    pointsx = info[2]; // array of [x,y,r], r is negative if left-angle (points may have pulleys as third element, but pointsx have radi)
+    pointsx = info[2]; // array of [x,y,r], r is negative if left-angle (points may have pulleys as third element, but pointsx have radii)
     tangents = info[3];
     arcs = info[4];
     length = ceil(_belt_length(info, open) / pitch) * pitch;

vitamins/bldc_motor.scad

@@ -0,0 +1,288 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//!  Brushless DC electric motor
+//
+include <NopSCADlib/core.scad>
+
+use <NopSCADlib/vitamins/rod.scad>
+use <NopSCADlib/utils/thread.scad>
+use <NopSCADlib/utils/tube.scad>
+
+
+function BLDC_diameter(type)                    = type[1]; //! Diameter of motor
+function BLDC_height(type)                      = type[2]; //! Height of motor including boss, if any, but excluding prop shaft
+function BLDC_shaft_diameter(type)              = type[3]; //! shaft diameter
+function BLDC_shaft_length(type)                = type[4]; //! Total shaft length
+function BLDC_shaft_offset(type)                = type[5]; //! shaft offset from base
+function BLDC_body_colour(type)                 = type[6]; //! Body colour
+function BLDC_base_diameter(type)               = type[7]; //! Base diameter
+function BLDC_base_height_1(type)               = type[8]; //! Base height 1
+function BLDC_base_height_2(type)               = type[9]; //! Base height 2
+function BLDC_base_hole_diameter(type)          = type[10]; //! Base hole diameter
+function BLDC_base_holes(type)                  = type[11]; //! Base holes
+function BLDC_base_open(type)                   = type[12]; //! Base open
+function BLDC_wire_diameter(type)               = type[13]; //! Wire diameter
+function BLDC_side_colour(type)                 = type[14]; //! Side colour
+function BLDC_bell_diameter(type)               = type[15]; //! Bell diameter
+function BLDC_bell_height_1(type)               = type[16]; //! Bell height 1
+function BLDC_bell_height_2(type)               = type[17]; //! Bell height 2
+function BLDC_bell_hole_diameter(type)          = type[18]; //! Bell hole diameter
+function BLDC_bell_holes(type)                  = type[19]; //! Bell holes
+function BLDC_bell_spokes(type)                 = type[20]; //! Bell spoke count
+function BLDC_boss_diameter(type)               = type[21]; //! Boss diameter
+function BLDC_boss_height(type)                 = type[22]; //! Boss height
+function BLDC_prop_shaft_length(type)           = type[23]; //! Prop shaft length, including threaded section
+function BLDC_prop_shaft_diameter(type)         = type[24]; //! Diameter of unthreaded portion of prop shaft
+function BLDC_prop_shaft_thread_length(type)    = type[25]; //! Length of threaded section of prop shaft
+function BLDC_prop_shaft_thread_diameter(type)  = type[26]; //! Diameter of threaded section of prop shaft
+
+bldc_cap_colour  = grey(50);
+bldc_shaft_colour = grey(90);
+bldc_bearing_colour = grey(80);
+
+module BLDC(type) { //! Draw specified BLDC motor
+    vitamin(str("BLDC(", type[0], "): Brushless DC motor ", type[0]));
+
+    body_colour = BLDC_body_colour(type);
+    side_colour = BLDC_side_colour(type);
+    body_diameter = BLDC_diameter(type);
+    wall_thickness = 1;
+
+    height = BLDC_height(type) - BLDC_boss_height(type);
+
+    module feet(base_diameter) {
+        holes = BLDC_base_holes(type);
+        hole_count = is_list(holes) ? len(holes) : 4;
+        for(i = [0 : 1 : hole_count - 1]) {
+            spacing = is_list(holes) ? holes[i] : holes;
+            radius = base_diameter / 2 - spacing / 2;
+            rotate(i * 360 / hole_count + (hole_count == 4 ? 45 : 0))
+                difference() {
+                    hull() {
+                        circle(r = radius);
+                        translate([-spacing / 2, 0])
+                            circle(r = radius);
+                    }
+                    translate([-spacing / 2, 0])
+                        circle(d = BLDC_base_hole_diameter(type));
+                }
+        }
+    }
+
+    module cutout(d1, d2, r, h) {
+        translate_z(-eps)
+            linear_extrude(h + 2 * eps)
+                hull() {
+                    translate([d1 / 2, 0])
+                        circle(r = r);
+                    translate([d2 / 2, -r])
+                        square([eps, 2 * r]);
+                }
+    }
+
+    module cutout2(d1, r1, d2, r2, h) {
+        translate_z(-eps)
+            linear_extrude(h + 2 * eps)
+                hull() {
+                    translate([d1 / 2, 0])
+                        circle(r = r1);
+                    translate([d2 / 2, 0])
+                        circle(r = r2);
+                }
+    }
+
+    module base() {
+        base_diameter = BLDC_base_diameter(type);
+        h1 = BLDC_base_height_1(type);
+        h2 = BLDC_base_height_2(type);
+        color(body_colour)
+            if (BLDC_base_open(type)) {
+                linear_extrude(h1)
+                    difference() {
+                        union() {
+                            feet(base_diameter);
+                            circle(d = 3 * BLDC_shaft_diameter(type));
+                        }
+                        circle(d = 2 * BLDC_shaft_diameter(type));
+                    }
+                translate_z(h1)
+                    cylinder(d = 3 * BLDC_shaft_diameter(type), h = h2);
+            } else {
+                difference() {
+                    union() {
+                        render(convexity = 8)
+                            linear_extrude(h1)
+                                difference() {
+                                    circle(d = base_diameter);
+                                    circle(d = 2 * BLDC_shaft_diameter(type));
+                                    BLDC_base_screw_positions(type)
+                                        circle(d = BLDC_base_hole_diameter(type));
+                                }
+                        rotate_extrude()
+                            polygon([ [base_diameter / 2, 0], [body_diameter / 2, h1], [body_diameter / 2, h1+h2], [body_diameter / 2 - wall_thickness, h1 + h2], [body_diameter / 2 - wall_thickness, h1], [base_diameter / 2, h1] ]);
+                    }
+                r = body_diameter > 40 ? 2 : body_diameter * PI / (8 * 3);
+                if (body_diameter > 40) {
+                    r = 2;
+                    // cutout for wires
+                    translate_z(h2 /2)
+                        cutout(base_diameter, body_diameter, 6, h1);
+                    for (a = [90, 180, 270])
+                        rotate(a) {
+                            cutout(base_diameter - 2 * r, body_diameter, r, h1 + h2 / 2);
+                            for (b = [-90 / 4, 90 / 4])
+                                rotate(b)
+                                    cutout(base_diameter - 5 * r, body_diameter, r, h1 + h2 / 2);
+                        }
+                } else {
+                    r = body_diameter * PI / (8 * 3);
+                    for (a = [0, 90, 180, 270])
+                        rotate(a)
+                            cutout(base_diameter, body_diameter, r, h1);
+                }
+            }
+        }
+        color(bldc_bearing_colour)
+            translate_z(0.25)
+                tube(or = BLDC_shaft_diameter(type), ir = BLDC_shaft_diameter(type) / 2, h = h1, center = false);
+
+        if (show_threads)
+            BLDC_base_screw_positions(type)
+                female_metric_thread(BLDC_base_hole_diameter(type), metric_coarse_pitch(BLDC_base_hole_diameter(type)), h1, center = false, colour = body_colour);
+
+        wire_diameter = BLDC_wire_diameter(type);
+        for (i = [0 : 2])
+            color(wire_diameter >= 3 ? ["yellow", grey(20), "red"][i] : grey(20))
+                translate([body_diameter / 5, (i - 1) * wire_diameter, wire_diameter / 2 + 0.25 + (body_diameter > 40 ? h2/2 : 0)])
+                    rotate([0, 90, 0])
+                        cylinder(r = wire_diameter / 2, h = body_diameter / 2, center = false);
+
+    } // end module base
+
+    module bell() {
+        bell_diameter = BLDC_bell_diameter(type);
+        h1 = BLDC_bell_height_1(type);
+        h2 = BLDC_bell_height_2(type);
+        gap = BLDC_base_open(type) ? 0 : height > 20 ? 0.5 : 0.25;
+        side_length = height - h2 - h1 - gap - BLDC_base_height_1(type) - BLDC_base_height_2(type);
+
+        color(body_colour) {
+            translate_z(height - h2) {
+                difference() {
+                    union() {
+                        top_thickness = min(h2, 2);
+                        render(convexity = 8)
+                            translate_z(h2 - top_thickness)
+                                linear_extrude(top_thickness)
+                                    difference() {
+                                        circle(d = bell_diameter);
+                                        if (BLDC_shaft_length(type) > height)
+                                            circle(d = BLDC_shaft_diameter(type));
+                                        BLDC_bell_screw_positions(type)
+                                            circle(d = BLDC_bell_hole_diameter(type));
+                                    }
+                        rotate_extrude()
+                            polygon([ [bell_diameter/2, h2], [body_diameter/2, 0], [body_diameter/2, -h1], [body_diameter/2 - wall_thickness, -h1], [body_diameter/2 - wall_thickness, 0], [bell_diameter/2, h2 - top_thickness] ]);
+                    }
+                    spoke_count = BLDC_bell_spokes(type);
+                    if (spoke_count % 4 == 0) {
+                        r = body_diameter > 40 ? body_diameter / 15 : 2.5;
+                        for (a = [0, 90, 180, 270])
+                            rotate(a) {
+                                cutout(bell_diameter + 2 * r, body_diameter, r, h2);
+                                rotate(45) {
+                                    cutout(bell_diameter, body_diameter, r, h2);
+                                }
+                            }
+                    } else {
+                        r1 = bell_diameter * PI / (spoke_count * 3);
+                        r2 = body_diameter * PI / (spoke_count * 3);
+                        for (i = [0 : 1 : spoke_count - 1])
+                            rotate(i * 360 / spoke_count)
+                                cutout2(bell_diameter, r1, body_diameter, r2, h2);
+                    }
+                } // end difference
+            } // end translate
+
+            if (BLDC_boss_height(type))
+                translate_z(height)
+                    tube(or = BLDC_boss_diameter(type)/2, ir = BLDC_shaft_diameter(type)/2, h = BLDC_boss_height(type), center = false);
+
+        } // end colour
+
+        color(BLDC_prop_shaft_thread_length(type) == 0 ? bldc_shaft_colour : body_colour)
+            if (BLDC_prop_shaft_diameter(type))
+                translate_z(height + BLDC_boss_height(type)) {
+                    thread_diameter = BLDC_prop_shaft_thread_diameter(type);
+                    unthreaded_length = BLDC_prop_shaft_length(type) - BLDC_prop_shaft_thread_length(type);
+                    cylinder(d=BLDC_prop_shaft_diameter(type), h = unthreaded_length);
+                    if (BLDC_prop_shaft_thread_length(type) > 0)
+                        translate_z(unthreaded_length)
+                            if (show_threads)
+                                male_metric_thread(thread_diameter, metric_coarse_pitch(thread_diameter), BLDC_prop_shaft_thread_length(type), center = false);
+                            else
+                                cylinder(d = thread_diameter, h = BLDC_prop_shaft_thread_length(type));
+                }
+        color(side_colour)
+            translate_z(height - h2 - h1  -side_length)
+                tube(body_diameter/2, body_diameter/2 - wall_thickness, side_length, center = false);
+
+        if (show_threads)
+            translate_z(height)
+                BLDC_bell_screw_positions(type)
+                    vflip()
+                        female_metric_thread(BLDC_bell_hole_diameter(type), metric_coarse_pitch(BLDC_bell_hole_diameter(type)), h2, center = false, colour = body_colour);
+    } // end module bell
+
+    base();
+    bell();
+
+    color(bldc_shaft_colour)
+        translate_z(-BLDC_shaft_offset(type) - eps)
+            not_on_bom()
+                rod(d = BLDC_shaft_diameter(type), l = BLDC_shaft_length(type), center = false);
+
+}
+
+module BLDC_screw_positions(holes, n = 4) { //! Screw positions utility function
+    hole_count = is_list(holes) ? len(holes) : 4;
+    for($i = [0 : min(n, hole_count) - 1]) {
+        spacing = is_list(holes) ? holes[$i] : holes;
+        rotate($i * 360 / hole_count)
+            translate([spacing / 2, 0])
+                rotate(-$i * 90)
+                    children();
+    }
+}
+
+module BLDC_base_screw_positions(type, n = 4) { //! Positions children at the base screw holes
+    if (BLDC_base_holes(type))
+        rotate(is_list(BLDC_base_holes(type)) && len(BLDC_base_holes(type)) == 3 ? 180 : 45)
+            BLDC_screw_positions(BLDC_base_holes(type), n)
+                children();
+}
+
+module BLDC_bell_screw_positions(type, n = 4) { //! Positions children at the bell screw holes
+    if (BLDC_bell_holes(type))
+        rotate(is_list(BLDC_bell_holes(type)) && len(BLDC_bell_holes(type)) == 3 ? 30 : 0)
+            BLDC_screw_positions(BLDC_bell_holes(type), n)
+                children();
+}

vitamins/bldc_motors.scad

@@ -0,0 +1,37 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+// Brushless DC electric motors
+//
+//                                     shaft  shaft shaft      body   base             holes                 base            side  bell             holes          boss  prop shaft   thread
+//                      diameter height diam length offset   colour   diam   h1    h2  diam position         open  wire    colour  diam   h1    h1  d  pos   spokes  d  h  length diam  length  diam
+BLDC0603  = ["BLDC0603",    9.0,  8,      1,  15.5,     1, crimson,    10,   1,  1.5,  1.4, [6,6,6],        true,  0.8, grey(20),    9,   1,    1,  0,  0,       5,  0, 0,     0,   0,      0,     0];
+BLDC0802  = ["BLDC0802",   11.5,  9.5,  1.5,    12,   0.5, grey(20),    9,   1,    2,  1.6, [6,6,6],        true,  1.0, grey(20),   11,   2, 0.75,  0,  0,       3,  0, 0,     0,   0,      0,     0];
+BLDC1105  = ["BLDC1105",   14.0, 11.75, 1.5,    11,     0, grey(90), 12.5, 1.6,  1.4,  2,    9,             true,  1.0, grey(90),   12,   1,    1,  2, [5,5],    4,  0, 0,     0,   0,      0,     0];
+BLDC1306  = ["BLDC1306",  17.75, 14.5,    2,    14,     0, crimson,    16, 1.5,    1,  2,   12,            false,  1.0, grey(20),   12,   1,    1,  0,  0,       6,  8, 1,  11.5,   5,    6.5,     5];
+BLDC1804  = ["BLDC1804",   23.0, 12,      2,    11,     0, grey(20),   19, 2.5,  1.5,  2,   12,            false,  1.5, grey(20),   18,   1,  2.5,  0,  0,       6,  9, 1,    12,   5,      6,     5];
+BLDC2205  = ["BLDC2205",   28.0, 17.25,   3,    16,     0, crimson,    26,   2,    3,  3,   [19,16,19,16], false,  1.6, grey(20), 22.5,   1, 3.75,  0,  0,       6,  0, 0,    14,   5,      9,     5];
+BLDC2212  = ["BLDC2212",   28.0, 27,      3,    26,     0, grey(20),   23,   4,    2,  3,   [19,16,19,16], false,  2.0, grey(20),   18,   2,    4,  0,  0,       6,  0, 0,    14,   8,      7,     6];
+BLDC3548  = ["BLDC3548",   35.0, 45,      5,  65.5,     1, gold,       32,   7,    1,  3,   [25,19,25,19], false,  3.0, grey(20),   32,   2,    4,2.5, [16,16,16],6,12, 3.4,   0,   0,      0,     0];
+BLDC4250  = ["BLDC4250",   42.5, 48,      5,    70,    20, crimson,    38,   4,    6,  3,   25,            false,  3.5, grey(20),   28,   3,    6,  3, 17,       8, 12, 2,     0,   0,      0,     0];
+
+bldc_motors = [BLDC0603, BLDC0802, BLDC1105, BLDC1306, BLDC1804, BLDC2205, BLDC2212, BLDC3548, BLDC4250];
+
+use <bldc_motor.scad>

vitamins/blower.scad

@@ -28,6 +28,7 @@ use <screw.scad>
 function blower_length(type)      = type[2]; //! Length of enclosing rectangle
 function blower_width(type)       = type[3]; //! Width of enclosing rectangle
 function blower_depth(type)       = type[4]; //! Height
+function blower_size(type)        = [blower_length(type), blower_width(type), blower_depth(type)]; //! Size
 function blower_bore(type)        = type[5]; //! The air intake hole diameter
 function blower_screw(type)       = type[6]; //! The type of screws needed
 function blower_hub(type)         = type[7]; //! Rotor hub diameter

vitamins/box_section.scad

@@ -0,0 +1,58 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Box sections.
+//
+include <../utils/core/core.scad>
+include <../utils/tube.scad>
+
+include <../vitamins/sheets.scad>
+
+function box_section_material(type)  = type[1]; //! Material description
+function box_section_size(type)      = type[2]; //! Size
+function box_section_thickness(type) = type[3]; //! Wall thickness
+function box_section_fillet(type)    = type[4]; //! Fillet
+function box_section_colour(type)    = type[5]; //! Colour
+function box_section_colour2(type)   = type[6]; //! Colour2, for woven box section
+function box_section_is_woven(type)  = !is_undef(type[6]); //! Box section is woven, eg carbon fiber
+
+module box_section(type, length, center = true) {
+    vitamin(str("box_section(", type[0], arg(length, 15), "): ", box_section_material(type), ", length ", length, "mm"));
+
+    size = box_section_size(type);
+    thickness = box_section_thickness(type);
+
+    if (box_section_is_woven(type))
+        translate_z(center ? 0 : length / 2) {
+            rotate([0, -90, 90])
+                for (z = [-size.y / 2, size.y / 2 - thickness])
+                    translate_z(z)
+                        woven_sheet(CF1, thickness, box_section_colour(type), box_section_colour2(type), length, size.x)
+                            square([length, size.x], center=true);
+            rotate([0, -90, 0])
+                for (z = [-size.x / 2, size.x / 2 - thickness])
+                    translate_z(z)
+                        woven_sheet(CF1, thickness, box_section_colour(type), box_section_colour2(type), length, size.y)
+                            square([length, size.y], center=true);
+        }
+    else
+        color(box_section_colour(type))
+            rectangular_tube([size.x, size.y, length], center, thickness, box_section_fillet(type));
+}

vitamins/box_sections.scad

@@ -0,0 +1,30 @@
+//
+// NopSCADlib Copyright Chris Palmer 2021
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+// Box sections
+//
+AL12x8x1 =  ["AL12x8x1",  "Aluminium rectangular box section 12mm x 8mm x 1mm",     [12, 8],  1, 0.5, silver, undef];
+AL20x20x2 = ["AL20x20x2", "Aluminium rectangular box section 20mm x 20mm x 2mm",    [20, 20], 2, 0.5, silver, undef];
+CF10x10x1 = ["CF10x10x1", "Carbon fiber rectangular box section 10mm x 10mm x 1mm", [10, 10], 1, 0.5, grey(35), grey(20)];
+
+
+box_sections = [AL12x8x1, AL20x20x2, CF10x10x1];
+
+use <box_section.scad>

vitamins/cable_strip.scad

@@ -20,7 +20,7 @@
 //
 //! A strip of polypropylene used with ribbon cable to make a cable flexible in one direction only.
 //!
-//! Modelled with a Bezier spline, which is not quite the same as a minimum energy curve but very close, epecially
+//! Modelled with a Bezier spline, which is not quite the same as a minimum energy curve but very close, especially
 //! near the extreme positions, where the model needs to be accurate.
 //!
 //! When the sides are constrained then a circular model is more accurate.

vitamins/camera.scad

@@ -25,7 +25,7 @@ use <pcb.scad>
 
 function camera_pcb(type)           = type[2]; //! The PCB part of the camera
 function camera_lens_offset(type)   = type[3]; //! Offset of the lens center from the PCB centre
-function camera_lens(type)          = type[4]; //! Stack of lens parts, can be round, rectanular or rounded rectangular, with optional tapered aperture
+function camera_lens(type)          = type[4]; //! Stack of lens parts, can be round, rectangular or rounded rectangular, with optional tapered aperture
 function camera_connector_pos(type) = type[5]; //! The flex connector block for the camera itself's position
 function camera_connector_size(type)= type[6]; //! The flex connector block for the camera itself's size
 

vitamins/display.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! LCD dispays.
+//! LCD displays.
 //
 include <../utils/core/core.scad>
 

vitamins/displays.scad

@@ -53,7 +53,7 @@ LCDS7282BPCB = ["", "", 85, 36, 1.65, 0, 2.56, 0, "green", false, [[-2.5, -2.5],
       []];
 
 LCDS7282B = ["LCDS7282B", "LCD display S-7282B", 73.6, 28.7, 9.6, LCDS7282BPCB,
-          [-2.5, 0, 0],                             // pcb offst
+          [-2.5, 0, 0],                             // pcb offset
           [[-64.5 / 2, -14.5 / 2], [64.5 / 2, 14.5 / 2, 0.6]],              // aperture
           [],                                       // touch screen
           0,                                        // thread length

vitamins/geared_stepper.scad

@@ -26,89 +26,138 @@ use <../utils/round.scad>
 
 function gs_diameter(type)     = type[2]; //! Can diameter
 function gs_height(type)       = type[3]; //! Can height
-function gs_pitch(type)        = type[4]; //! Screw pitch
-function gs_lug_w(type)        = type[5]; //! Screw lug width
-function gs_lug_t(type)        = type[6]; //! Screw lug thickness
-function gs_hole_d(type)       = type[7]; //! Screw hole diameter
-function gs_offset(type)       = type[8]; //! Offset of the shaft from the centre of the can
-function gs_boss_d(type)       = type[9]; //! Boss around the shaft diameter
-function gs_boss_h(type)       = type[10]; //! Boss around the shaft height
-function gs_shaft_d(type)      = type[11]; //! Shaft diameter
-function gs_shaft_flat(type)   = type[12]; //! Shaft width across the flats
-function gs_shaft_length(type) = type[13]; //! Shaft length
-function gs_flat_length(type)  = type[14]; //! Shaft flat length
-function gs_bulge_w(type)      = type[15]; //! Plastic bulge width
-function gs_bulge_d(type)      = type[16]; //! Plastic bulge depth from centre
-function gs_bulge_h(type)      = type[17]; //! Plastic bulge height
-function gs_bulge2_w(type)     = type[18]; //! Plastic rear bulge width
-function gs_bulge2_d(type)     = type[19]; //! Plastic rear bulge depth from centre
-function gs_bulge2_h(type)     = type[20]; //! Plastic rear bulge height
+function gs_radius(type)       = type[4]; //! Top - or bottom + corner radius
+function gs_motor(type)        = type[5]; //! Motor diameter and height if separate from gearbox
+function gs_pitch(type)        = type[6]; //! Screw pitch
+function gs_lug_w(type)        = type[7]; //! Screw lug width
+function gs_lug_t(type)        = type[8]; //! Screw lug thickness
+function gs_hole_d(type)       = type[9]; //! Screw hole diameter
+function gs_offset(type)       = type[10]; //! Offset of the shaft from the centre of the can
+function gs_boss_d(type)       = type[11]; //! Boss around the shaft diameter
+function gs_boss_h(type)       = type[12]; //! Boss around the shaft height
+function gs_shaft_d(type)      = type[13]; //! Shaft diameter
+function gs_shaft_flat(type)   = type[14]; //! Shaft width across the flats
+function gs_shaft_length(type) = type[15]; //! Shaft length
+function gs_flat_length(type)  = type[16]; //! Shaft flat length
+function gs_bulge(type)        = type[17]; //! Plastic bulge width, depth, height, z offset
+function gs_bulge2(type)       = type[18]; //! Plastic rear bulge width, depth, height
+function gs_wire_d(type)       = type[19]; //! Wire diameter
+function gs_wires(type)        = type[20]; //! Wire colours and grouping
 
 module geared_stepper_screw_positions(type) //! Place children at the screw positions
     for(side = [-1, 1])
         translate([side * gs_pitch(type) / 2, -gs_offset(type)])
             children();
 
+motor_colour = "#9BA2AC";
+gearbox_colour = "#FFF7EE";
+
 module geared_stepper(type) { //! Draw the specified geared stepper
     vitamin(str("geared_stepper(", type[0], "): Geared stepper - ", type[1]));
 
     radius = gs_diameter(type) / 2;
-    height = gs_height(type);
+    motor = gs_motor(type);
+    height = gs_height(type) - motor.y;
     offset = gs_offset(type);
-    color("silver") {
-        translate([0, -offset])
-            rounded_cylinder(r = radius, h = height, r2 = 1);
+    lug_t = gs_lug_t(type);
+    bulge = gs_bulge(type);
+    bulge_z = bulge[3];
+    bulge2 = gs_bulge2(type);
+    wires = gs_wires(type);
+
+    // Gearbox
+    color(motor.y ? gearbox_colour : motor_colour) {
+        difference() {
+            rad = gs_radius(type);
+            translate([0, -offset])
+                if(rad >= 0)
+                    rounded_cylinder(r = radius, h = height, r2 = rad);
+                else
+                    translate_z(height)
+                        vflip()
+                            rounded_cylinder(r = radius, h = height, r2 = -rad);
+
+            if(!lug_t)
+                geared_stepper_screw_positions(type)
+                    cylinder(d = gs_hole_d(type), h = 10, center = true);
+        }
 
         cylinder(d = gs_boss_d(type), h = 2 * gs_boss_h(type), center = true);
 
-        linear_extrude(gs_lug_t(type))
-            difference() {
-                hull()
+        if(lug_t)
+            linear_extrude(lug_t)
+                difference() {
+                    hull()
+                        geared_stepper_screw_positions(type)
+                            circle(d = gs_lug_w(type));
+
                     geared_stepper_screw_positions(type)
-                        circle(d = gs_lug_w(type));
+                        circle(d = gs_hole_d(type));
+                }
 
-                geared_stepper_screw_positions(type)
-                    circle(d = gs_hole_d(type));
-            }
-
-        translate([0, -offset - radius, eps])
-            cube([gs_bulge_w(type) - 2, 2 * (gs_bulge_d(type) - radius) - 2, 2 * eps], center = true);
+        if(!bulge_z)
+            translate([0, -offset - radius, eps])
+                cube([bulge.x - 2, 2 * (bulge.y - radius) - 2, 2 * eps], center = true);
     }
+
+    // Motor
+    if(motor.y)
+        color("#9BA2AC")
+            translate([0, -offset, height])
+                rotate_extrude()
+                    union() {
+                        r = motor.x / 2;
+                        rad = motor[2];
+                        square([r - rad, rad]);
+
+                        translate([0, motor.y - rad])
+                            square([r - rad, rad]);
+
+                        hull()
+                            for(y = [2 * rad, motor.y - 2 * rad])
+                                translate([r - rad, y])
+                                    circle(rad);
+                    }
+
+    // Shaft
+    f = gs_shaft_flat(type);
+    two_flats = f < 0;
     vflip()
-        color(brass) {
+        color(two_flats ? brass : gearbox_colour) {
             d = gs_shaft_d(type);
             h = gs_shaft_length(type);
             linear_extrude(h)
                 intersection() {
                     circle(d = d);
 
-                    square([d + 1, gs_shaft_flat(type)], center = true);
+                    translate([0, two_flats ? 0 : (f - d) / 2])
+                        square([d + 1, abs(f)], center = true);
                 }
 
             cylinder(d = d, h = h - gs_flat_length(type));
         }
 
-    color("skyblue") {
-        h1 = gs_bulge_h(type);
-        translate([0, - offset - radius, eps])
-            rounded_rectangle([gs_bulge_w(type), 2 * (gs_bulge_d(type) - radius), h1], 0.5, center = false);
+    // Wire block
+    color(bulge_z ? "white" : "skyblue") {
+        translate([0, - offset - radius, eps + bulge[3]])
+            rounded_rectangle([bulge.x, 2 * (bulge.y - radius), bulge.z], 0.5, center = false);
 
-        h2 = gs_bulge2_h(type);
-        translate([0, - offset, h1 + 1 - h2])
-            linear_extrude(h2)
-                round(0.5)
-                    intersection() {
-                        circle(gs_bulge2_d(type));
+        if(bulge2.z)
+            translate([0, - offset, bulge.z + 1 - bulge2.z])
+                linear_extrude(bulge2.z)
+                    round(0.5)
+                        intersection() {
+                            circle(bulge2.y);
 
-                        translate([0, -50])
-                            square([gs_bulge2_w(type), 100], center = true);
-                    }
+                            translate([0, -50])
+                                square([bulge2.x, 100], center = true);
+                        }
     }
 
-    translate_z(2.5)
-        for(i = [0 : 4])
-            translate([i - 2.5, 0])
-                rotate([90, 0, 0])
-                    color(["yellow", "orange", "red", "pink", "blue"][i])
-                        cylinder(d = 1, h = radius + offset + 10);
+    wire_d = gs_wire_d(type);
+    for(j = [0 : len(wires) - 1], i = [0 : len(wires[j]) - 1])
+        translate([(i - len(wires[j]) / 2 + 0.5) * wire_d, 0, bulge_z + (j ? bulge.z - 2.5 : 2.5)])
+            rotate([90, 0, 0])
+                color(wires[j][i])
+                    cylinder(d = wire_d, h = radius + offset + 10);
 }

vitamins/geared_steppers.scad

@@ -20,8 +20,16 @@
 //
 //! Geared tin can steppers
 //
-28BYJ_48 = ["28BYJ_48", "28BYJ-48 5V", 28, 19, 35, 7, 0.85, 4.2, 8, 9, 1.5, 5, 3, 10, 6, 14.7, 17, 16.5, 17.7, 15.5, 13.8 ];
+//                                          d   h   r    m           p  l    l     h  o   b    b  s    f   s   f      b                       b               w
+//                                          i   e   a    o           i  u    u     o  f   o    o  h    l   h   l      u                       u               i
+//                                          a   i   d    t           t  g    g     l  f   s    s  a    a   a   a      l                       l               r
+//                                              g   i    o           c             e  s   s    s  f    t   f   t      g                       g               e
+//                                              h   u    r           h  w    t        e           t        t          e                       e
+//                                              t   s                              d  t   d    h       w       l                              2               d
+//                                                       d   h  r                                 d        l          w   d       h   z       w     d     h
+28BYJ_48  = ["28BYJ_48",  "28BYJ-48 5V",   28, 19,  1, [ 0,  0, 0], 35, 7, 0.85, 4.2, 8,  9, 1.5, 5,-3.0, 10,  6, [14.7, 17,   16.5,  0], [17.7, 15.5, 13.8], 1,  [["yellow", "orange", "red", "pink", "blue"]] ];
+35BYGHJ75 = ["35BYGHJ75", "35BYGHJ75 0.4A",37, 37, -2, [35, 22, 1], 27, 0,    0, 3.0, 7, 12, 3.0, 5, 4.5, 17, 10, [ 7.7, 20.7, 9.25, 21], [   0,    0,    0], 1.3,[["brown", "red"], ["yellow", "green"]] ];
 
-geared_steppers = [28BYJ_48];
+geared_steppers = [28BYJ_48, 35BYGHJ75];
 
 use <geared_stepper.scad>

vitamins/iecs.scad

@@ -55,7 +55,7 @@ outlet_spades = [[spade4p8ll, 8, -7,  -2, 90],
 //                                                                                                                            w     h  r    t
 IEC_fused_inlet = ["IEC_fused_inlet", "IEC fused inlet JR-101-1F",   M3_cs_cap_screw, 36, 27, 16, 31, 3, 28,   31,   2, 2.0, 30,   33, 4, 3.0, 44, 15, fused_spades,  false ];
 IEC_fused_inlet2= ["IEC_fused_inlet2","IEC fused inlet old",         M3_cs_cap_screw, 36, 27, 14, 31, 3, 28,   31,   2, 2.5, 30,   33, 4, 2.5, 44, 18, fused_spades2, false ];
-IEC_320_C14_switched_fused_inlet = ["IEC_switched_fused_inlet", "IEC320 C14 switched fused inlet module",
+IEC_320_C14_switched_fused_inlet = ["IEC_320_C14_switched_fused_inlet", "IEC320 C14 switched fused inlet module",
                                                                      M3_cs_cap_screw, 40,  27, 16,46.8,3,28,   48, 2.4, 1.0, 33,   57, 4, 3.0, 48,16.5, iec320c14FusedSwitchedSpades,  false ];
 IEC_inlet       = ["IEC_inlet",       "IEC inlet",                   M3_cs_cap_screw, 40, 28, 18, 20, 3, 28,   20.5, 4, 2.5, 37,   23, 1, 2.5, 48, 14, inlet_spades,  false ];
 IEC_inlet_atx   = ["IEC_inlet_atx",   "IEC inlet for ATX",           M3_cs_cap_screw, 40, 27, 18, 19, 3, 30.5, 22,   2, 2.0, 30.5, 22, 2, 4.0, 50, 15, atx_spades,    false ];

vitamins/leadnut.scad

@@ -32,16 +32,21 @@ function leadnut_flange_t(type)      = type[6];     //! Flange thickness
 function leadnut_flange_offset(type) = type[7];     //! Offset of the flange from the top
 function leadnut_holes(type)         = type[8];     //! The number of screw holes
 function leadnut_hole_dia(type)      = type[9];     //! The diameter of the screw holes
-function leadnut_hole_pitch(type)    = type[10];    //! The radia pitch of the screw holes
+function leadnut_hole_pitch(type)    = type[10];    //! The radial pitch of the screw holes
 function leadnut_screw(type)         = type[11];    //! The type of the fixing screws
 function leadnut_pitch(type)         = type[12];    //! Screw pitch
 function leadnut_lead(type)          = type[13];    //! Screw lead
+function leadnut_flat(type)          = type[14];    //! Flat section width
+function leadnut_colour(type)        = type[15];    //! The colour
 
 function leadnut_shank(type)         = leadnut_height(type) - leadnut_flange_t(type) - leadnut_flange_offset(type); //! The length of the shank below the flange
 
 module leadnut_screw_positions(type) { //! Position children at the screw holes
     holes = leadnut_holes(type);
-    for(i = [0 : holes - 1], a = i * 360 / holes + 180)
+    flat = leadnut_flat(type);
+    angles = flat ? [let(h = holes / 2, a = 90 / (h - 1)) for(i = [0 : h - 1], side = [-1, 1]) side * (45 + i * a)]
+                  : [for(i = [0 : holes - 1]) i * 360 / holes + 180];
+    for(a = angles)
         rotate(a)
             translate([leadnut_hole_pitch(type), 0, leadnut_flange_t(type)])
                 rotate(45)
@@ -55,8 +60,10 @@ module leadnut(type) { //! Draw specified leadnut
     h = leadnut_height(type);
     pitch = leadnut_pitch(type);
     lead = leadnut_lead(type);
+    flat = leadnut_flat(type);
+    flange_d = leadnut_flange_dia(type);
 
-    color("dimgrey") vflip()
+    color(leadnut_colour(type)) vflip()
         translate_z(-leadnut_flange_offset(type) - leadnut_flange_t(type)) {
             tube(or = leadnut_od(type) / 2, ir = bore_r, h = h, center = false);
 
@@ -66,12 +73,17 @@ module leadnut(type) { //! Draw specified leadnut
             translate_z(leadnut_flange_offset(type))
                 linear_extrude(leadnut_flange_t(type))
                     difference() {
-                        circle(d = leadnut_flange_dia(type));
+                        circle(d = flange_d);
 
                         circle(bore_r);
 
                         leadnut_screw_positions(type)
                             circle(d = leadnut_hole_dia(type));
+
+                        if(flat)
+                            for(side = [-1, 1])
+                                translate([side * flange_d / 2, 0])
+                                    square([flange_d - flat, flange_d], center = true);
                     }
         }
 }

vitamins/leadnuts.scad

@@ -16,10 +16,18 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+//                                                    b   s     h   f     f    f    h  h    h        s             p   l  f  c
+//                                                    o   h     e   l     l    l    o  o    o        c             i   e  l  o
+//                                                    r   a     i   a     a    a    l  l    l        r             t   a  a  l
+//                                                    e   n     g   n     n    n    e  e    e        e             c   d  t  o
+//                                                        k     h   g     g    g    s                w             h         u
+//                                                              t   e     e    e       d    p                                r
+//
+//                                                                  d     t    o
+LSN8x2  = ["LSN8x2",  "Leadscrew nut 8 x 2",           8, 10.2, 15, 22,   3.5, 1.5, 4, 3.5, 8,       M3_cap_screw, 2,  2, 0, "dimgrey"];
+LSN8x8  = ["LSN8x8",  "Leadscrew nut 8 x 8 RobotDigg", 8, 12.75,19, 25.4, 4.1, 0,   3, 3.5, 19.05/2, M3_cap_screw, 2,  8, 0, "dimgrey"];
+SFU1610 = ["SFU1610", "Leadscrew nut for SFU1610",    16, 28, 42.5, 48,    10, 0,   6, 6,   38/2,    M6_cap_screw, 5, 10, 40, "#DFDAC5"];
 
-LSN8x2 = ["LSN8x2", "Leadscrew nut 8 x 2",          8, 10.2, 15, 22,   3.5, 1.5, 4, 3.5, 8,       M3_cap_screw, 2, 2];
-LSN8x8 = ["LSN8x8", "Leadscrew nut 8 x 8 RobotDigg",8, 12.75,19, 25.4, 4.1, 0,   3, 3.5, 19.05/2, M3_cap_screw, 2, 8];
-
-leadnuts = [LSN8x2, LSN8x8];
+leadnuts = [LSN8x2, LSN8x8, SFU1610];
 
 use <leadnut.scad>

vitamins/light_strip.scad

@@ -21,7 +21,7 @@
 //! LED strip lights that can be cut to size.
 //!
 //! The definitions are for the full length but they can be cut to size by specifying how many segments,
-//! which can by calcuated using `light_strip_segments(type, max_length)`.
+//! which can by calculated using `light_strip_segments(type, max_length)`.
 //!
 //! The `light_strip_clip()` module makes a clip to go around the light that can be incorporated into a printed bracket to hold it.
 //

vitamins/opengrab.scad

@@ -18,9 +18,9 @@
 //
 
 //
-//! Nicodrone OpenGrab V3 electro-permananet magnet, see <https://nicadrone.com/products/epm-v3>.
+//! Nicodrone OpenGrab V3 electro-permanent magnet, see <https://nicadrone.com/products/epm-v3>.
 //!
-//! A permanent magnet that can be magnatized and de-magnatized electronically.
+//! A permanent magnet that can be magnetized and de-magnetized electronically.
 //
 include <../utils/core/core.scad>
 use <../utils/thread.scad>

vitamins/panel_meter.scad

@@ -23,7 +23,7 @@
 //! Notes on the DSN_VC288:
 //!
 //! * The tabs aren't modelled because they can be fully retracted if the PCB is removed.
-//! * The current connector isn't moddelled as it is awkwardly tall. I remove it and solder wires instead.
+//! * The current connector isn't modelled as it is awkwardly tall. I remove it and solder wires instead.
 //
 include <../utils/core/core.scad>
 

vitamins/pcb.scad

@@ -45,20 +45,25 @@ function pcb_thickness(type)    = type[4];  //! Thickness
 function pcb_radius(type)       = type[5];  //! Corner radius
 function pcb_hole_d(type)       = type[6];  //! Mounting hole diameter
 function pcb_land_d(type)       = type[7];  //! Pad around mounting hole
-function pcb_colour(type)       = type[8];  //! Colour of the subtrate
+function pcb_colour(type)       = type[8];  //! Colour of the substrate
 function pcb_parts_on_bom(type) = type[9];  //! True if the parts should be separate BOM items
 function pcb_holes(type)        = type[10]; //! List of hole positions
 function pcb_components(type)   = type[11]; //! List of components
 function pcb_accessories(type)  = type[12]; //! List of accessories to go on the BOM, SD cards, USB cables, etc.
-function pcb_grid(type)         = type[13]; //! Grid if a perfboard
+function pcb_grid(type)         = type[13]; //! Grid origin if a perfboard
 function pcb_polygon(type)      = type[14]; //! Optional outline polygon for odd shaped boards
 function pcb_screw(type, cap = hs_cap) = Len(type[15]) ? type[15] : find_screw(cap, screw_smaller_than(pcb_hole_d(type))); //! Mounting screw type
 function pcb_size(type) = [pcb_length(type), pcb_width(type), pcb_thickness(type)]; //! Length, width and thickness in a vector
 
+function pcb_component(type, name, index = 0) = //! Return the component specified by name and index
+    [for(component = pcb_components(type)) if(component[3] == name) component][index];
+
 
 function pcb_grid_pos(type, x, y, z = 0) = //! Returns a pcb grid position
-    [-pcb_length(type) / 2 + pcb_grid(type).x + 2.54 * x,
-     -pcb_width(type)  / 2 + pcb_grid(type).y + 2.54 * y, pcb_thickness(type) + z];
+    let(grid = pcb_grid(type))
+        [-pcb_size(type).x / 2 + grid.x + x * (is_undef(grid[5]) ? 2.54 : grid[5]),
+         -pcb_size(type).y / 2 + grid.y + y * (is_undef(grid[6]) ? 2.54 : grid[6]),
+          pcb_size(type).z + z];
 
 module pcb_grid(type, x, y, z = 0)  //! Positions children at specified grid position
     translate(pcb_grid_pos(type, x, y, z))
@@ -69,7 +74,7 @@ function pcb_coord(type, p) = let(l = pcb_length(type), w = pcb_width(type)) //!
     [(p.x >= 0 ? p.x : l + p.x) - l / 2,
      (p.y >= 0 ? p.y : w + p.y) - w / 2];
 
-module pcb_hole_positions(type, all = true) { // Positition children at the hole positions, including holes not used for screws
+module pcb_hole_positions(type, all = true) { // Position children at the hole positions, including holes not used for screws
     holes = pcb_holes(type);
 
     for($i = [0 : 1 : len(holes) - 1]) {
@@ -158,7 +163,7 @@ module usb_A(h, v_flange_l, bar, cutout) {
             }
 }
 
-module molex_usb_Ax2(cutout) { //! Draw Molex USB connector suitable for perf board
+module molex_usb_Ax2(cutout) { //! Draw Molex dual USB A connector suitable for perf board
     w = 15.9;
     h = 16.6;
     l = 17;
@@ -218,6 +223,63 @@ module molex_usb_Ax2(cutout) { //! Draw Molex USB connector suitable for perf bo
     }
 }
 
+module molex_usb_Ax1(cutout) { //! Draw Molex USB A connector suitable for perf board
+    w = 15.3;
+    h = 7.7;
+    l = 14.5;
+    pin_l = 2.8;
+    clearance = 0.2;
+    tag_l = 4.4;
+    tag_r = 0.5;
+    tag_w = 1.5;
+    tag_t = 0.3;
+
+    if(cutout)
+        translate([0, -w / 2 - clearance, -clearance])
+            cube([100, w + 2 * clearance, h + 2 * clearance]);
+    else {
+        color(silver)
+            translate([-l / 2, 0])
+                rotate([90, 0, 90])
+                    translate([-w / 2, 0]) {
+                        cube([w, h, l - 9]);
+
+                        linear_extrude(l)
+                            difference() {
+                                square([w, h]);
+
+                                 translate([w / 2, h / 2])
+                                    square([12.6, 5.08], center = true);
+                            }
+                    }
+
+        translate([-1.5, 0, h / 2])
+            usb_A_tongue();
+
+        color(silver)
+            rotate(-90) {
+                for(x = [-1.5 : 1 : 1.5])
+                    translate([inch(x / 10), - l / 2 + inch(0.05)])
+                        hull() {
+                            cube([0.6, 0.3, 2 * pin_l - 2], center = true);
+
+                            cube([0.4, 0.3, 2 * pin_l], center = true);
+                        }
+
+                for(side = [-1, 1])
+                    translate([side * w / 2, -l / 2 + 4.2])
+                        rotate(-side * 90)
+                            hull() {
+                                translate([0, tag_l - tag_r])
+                                    cylinder(r = tag_r, h = tag_t);
+
+                                translate([-tag_w / 2, 0])
+                                    cube([tag_w, eps, tag_t]);
+                            }
+            }
+    }
+}
+
 module rj45(cutout = false) { //! Draw RJ45 Ethernet connector
     l = 21;
     w = 16;
@@ -916,6 +978,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
     rotate(comp.z) {
         // Components that have a cutout parameter go in this section
         if(show(comp, "2p54header"))    pin_header(2p54header, comp[4], comp[5], param(6, false), param(8, false), cutouts, colour = param(7, undef));
+        if(show(comp, "2p54joiner"))    pin_header(2p54joiner, comp[4], comp[5], param(6, false), param(8, false), cutouts, colour = param(7, undef));
         if(show(comp, "2p54boxhdr"))    box_header(2p54header, comp[4], comp[5], param(6, false), cutouts);
         if(show(comp, "2p54socket"))    pin_socket(2p54header, comp[4], comp[5], param(6, false), param(7, 0), param(8, false), cutouts, param(9, undef));
         if(show(comp, "chip"))          chip(comp[4], comp[5], comp[6], param(7, grey(30)), cutouts);
@@ -935,6 +998,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
         if(show(comp, "uSD"))           uSD(comp[4], cutouts);
         if(show(comp, "trimpot10"))     trimpot10(param(4, false), cutouts);
         if(show(comp, "molex_usb_Ax2")) molex_usb_Ax2(cutouts);
+        if(show(comp, "molex_usb_Ax1")) molex_usb_Ax1(cutouts);
         if(show(comp, "smd_led"))       smd_led(comp[4], comp[5], cutouts);
         if(show(comp, "block"))         block(size = [comp[4], comp[5], comp[6]], colour = comp[7], makes_cutout = param(8));
         if(!cutouts) {
@@ -951,16 +1015,18 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
             if(show(comp, "gterm635"))      green_terminal(gt_6p35, comp[4], comp[5], param(6,"lime"));
             if(show(comp, "term35"))        terminal_35(comp[4], param(5,"blue"));
             if(show(comp, "transition"))    idc_transition(2p54header, comp[4], comp[5]);
-            if(show(comp, "led"))           led(comp[4], comp[5], 2.6);
+            if(show(comp, "led"))           translate_z(eps) led(comp[4], comp[5], 2.6);
             if(show(comp, "pdip"))          pdip(comp[4], comp[5], param(6, false), param(7, inch(0.3)));
             if(show(comp, "ax_res"))        ax_res(comp[4], comp[5], param(6, 5), param(7, 0));
             if(show(comp, "link"))          wire_link(l = comp[4], h = param(5, 1), d = param(6, 0.8), tail = param(7, 3));
             if(show(comp, "D_plug"))        translate_z(d_pcb_offset(comp[4])) d_plug(comp[4], pcb = true);
             if(show(comp, "molex_hdr"))     molex_254(comp[4]);
             if(show(comp, "jst_xh"))        jst_xh_header(jst_xh_header, comp[4], param(5, false), param(6, "white"), param(7, undef));
+            if(show(comp, "jst_ph"))        jst_xh_header(jst_ph_header, comp[4], param(5, false), param(6, "white"), param(7, undef));
             if(show(comp, "potentiometer")) potentiometer(param(4, 5), param(5, 9));
             if(show(comp, "buzzer"))        buzzer(param(4, 9), param(5, 12), param(6, grey(20)));
             if(show(comp, "smd_res"))       smd_resistor(comp[4], comp[5]);
+            if(show(comp, "smd_cap"))       smd_capacitor(comp[4], comp[5]);
         }
     }
 }
@@ -1015,44 +1081,65 @@ module pcb_grid_positions(type) {
 module pcb(type) { //! Draw specified PCB
     grid = pcb_grid(type);
     t = pcb_thickness(type);
+    w = pcb_width(type);
+    l = pcb_length(type);
+
+    module pcb_shape()
+        if(Len(pcb_polygon(type)))
+            polygon(pcb_polygon(type));
+        else
+            rounded_square([l, w], r = pcb_radius(type));
+
     if(pcb_name(type))
         vitamin(str("pcb(", type[0], "): ", pcb_name(type)));
 
     for(part = pcb_accessories(type))
         vitamin(part);
 
-    color(pcb_colour(type)) linear_extrude(t) difference() {
-        if(Len(pcb_polygon(type)))
-            polygon(pcb_polygon(type));
-        else
-            rounded_square([pcb_length(type), pcb_width(type)], r = pcb_radius(type));
+    color(pcb_colour(type))
+        linear_extrude(t)
+            difference() {
+                pcb_shape();
 
-        pcb_hole_positions(type)
-            circle(d = pcb_hole_d(type) + eps);
+                pcb_hole_positions(type)
+                    offset(eps)
+                        circle4n(d = pcb_hole_d(type));
 
-        if(Len(grid))
-            pcb_grid_positions(type)
-                circle(d = 1 + eps);
-    }
+                if(Len(grid))
+                    pcb_grid_positions(type)
+                        circle(d = 1 + eps);
+            }
 
     land = pcb_land_d(type);
+    land_r = Len(land) > 2 ? land[2] : 0;
     hole = pcb_hole_d(type);
-    color("silver")
+    plating = 0.1;
+    color(Len(land) > 3 ? land[3] : silver)
         translate_z(t / 2)
-            pcb_hole_positions(type)
-                if(is_list(land))
-                    linear_extrude(t + 2 * eps, center = true)
-                        difference() {
-                            square(land, center = true);
+            linear_extrude(t + 2 * plating, center = true)
+                difference() {
+                    intersection() {
+                        pcb_hole_positions(type)
+                            if(is_list(land)) {
+                                p = pcb_holes(type)[$i];  // If edge SMT pad then make it rectangular to overlap without gaps
+                                edge = abs(p.x) < eps || abs(p.x - l) < eps || abs(p.y) < eps || abs(p.y - w) < eps;
+                                rounded_square([land.x, land.y], edge ? 0 : land_r);
+                            }
+                            else
+                                circle(d = max(land, 1));
 
-                            circle(d = hole);
-                        }
-                else
-                    tube(or =  max(land, 1) / 2, ir = hole / 2, h = t + 2 * eps);
+                        offset(eps)
+                            pcb_shape();   // Handle half holes on the edge of PCBs such as ESP8266
+                    }
+
+                    pcb_hole_positions(type)
+                        circle4n(d = hole);
+                }
 
     fr4 = pcb_colour(type) != "sienna";
-    plating = 0.15;
-    color(pcb_colour(type) == "green" ? "silver" : "gold")
+    pcb_colour = pcb_colour(type);
+    plating_colour = is_undef(grid[4]) ? ((pcb_colour == "green" || pcb_colour == "#2140BE") ? silver : pcb_colour == "sienna" ? copper : gold) : grid[4];
+    color(plating_colour)
         translate_z(-plating)
             linear_extrude(fr4 ? t + 2 * plating : plating)
                 if(Len(grid)) {

vitamins/pcbs.scad

@@ -555,6 +555,28 @@ RPI0 =  ["RPI0", "Raspberry Pi Zero",     65,    30,    1.4, 3,    2.75, 6, "gre
     [": Micro SD card"],
     [32.5 - 9.5 * 2.54, 26.5 - 1.27, 20, 2]];
 
+RPI_Pico = [
+    "RPI_Pico", "Raspberry Pi Pico",
+    51, 21, 1.6, // size
+    0.5, // corner radius
+    2.1, // mounting hole diameter
+    0, // pad around mounting hole, pad is actually 3.8, but unplated
+    "green", // colour
+    false, // true if parts should be separate BOM items
+    [ // hole positions
+        [-2, 4.8], [-2, -4.8], [2, -4.8], [2, 4.8]
+    ],
+    [ // components
+        [  1.75, 21/2, 180, "usb_uA" ],
+        [ 25,    21/2,   0, "chip", 7, 7, 0.8],
+        // mock up the reset button
+        [ 12.75, 7.5,    0, "block", 4.5, 3.35, 2,    "DarkGray"],
+        [ 12.75, 7.5,    0, "block", 3,   2.25, 2.75, "LightGray"],
+    ],
+    [], // accessories
+    [1.37, 1.61, 20, 2, gold, 2.54, 17.78], // 20x2 grid of holes
+];
+
 EnviroPlus =  ["EnviroPlus", "Enviro+",     65,    30.6,    1.6, 3,    2.75, 6, "white", false, [[3.5, 3.8], [-3.5, 3.8], [-3.5, -3.8], [3.5, -3.8]],
     [[32.5, -3.8,   0, "-2p54socket", 20, 2, false, 5, true],
      [-15.5, 2.5,   0, "-chip", 15, 5, 3, "white"],
@@ -705,6 +727,8 @@ PERF70x30 = ["PERF70x30", "Perfboard 70 x 30mm", 70, 30, 1.6, 0, 2.3, 0, "green"
 
 PERF60x40 = ["PERF60x40", "Perfboard 60 x 40mm", 60, 40, 1.6, 0, 2.3, 0, "green", true, [[2,2],[-2,2],[2,-2],[-2,-2]], [], [], [5.87, 3.49]];
 
+PERF70x51 = ["PERF70x51", "Perfboard 70 x 51mm", 70, 51, 1.0, 0, 3.0, 0, "sienna", true, [[3.0, 5.25], [-3.0, 5.25], [3.0, -5.25], [-3.0, -5.25]], [], [], [5.79, 3.91]];
+
 PERF74x51 = ["PERF74x51", "Perfboard 74 x 51mm", 74, 51, 1.0, 0, 3.0, 0, "sienna", true, [[3.0, 3.5], [-3.0, 3.5], [3.0, -3.5], [-3.0, -3.5]], [], [], [9.5, 4.5]];
 
 PSU12V1A = ["PSU12V1A", "PSU 12V 1A", 67, 31, 1.7, 0, 3.9, 0, "green", true, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]], [], []];
@@ -747,10 +771,59 @@ ESP_01 = [
     [] // accessories
 ];
 
-pcbs = [MP1584EN, TP4056, ESP_01, RAMPSEndstop, MT3608, PI_IO, ExtruderPCB, ZC_A0591, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
+XIAO = [
+    "XIAO", "Seeeduino XIAO",
+    21, 18, 1.2, // Size
+    1.5, // corner radius
+    0.8, // mounting hole diameter
+    [2, 2.6, 1- eps, gold], // pad around mounting hole
+    grey(25), // color
+    false, // true if parts should be separate BOM items
+    [for(x = [0:6], y = [-1,1]) [x * 2.54 + 2.71, y * 3 * 2.54 + 9], // Inboard hole positions
+     for(x = [0:6], y = [-1,1]) [x * 2.54 + 2.71, y * 9 + 9]],       // Hole positions on the edge, pad overlaps the inboard holes
+    [ // components
+        [7.6, 9, 0, "block", 12.3, 12, 2.41, silver], // can
+        [21 + 1.76 - 7.35 / 2, 9, 0, "usb_C"],
+    ],
+    [] // accessories
+];
+
+LIPO_fuel_gauge = [
+    "LIPO_fuel_gauge", "LIPO fuel gauge",
+    24, 10, 1.6, // Size
+    0, // corner radius
+    1, // mounting hole diameter
+    1.8, // pad around mounting hole
+    "red", // color
+    false, // true if parts should be separate BOM items
+    [for(x = [0:2], y = [-1,1]) [x * 2.54 + 5.27, y * 1.5 * 2.54 + 5],
+     for(x = 3,     y = [-1,1]) [x * 2.54 + 5.27, y * 0.5 * 2.54 + 5]],
+    [ // components
+        [17, 5, 90, "jst_ph", 2, true],
+        [2.54 + 5.27,  1.5 * 2.54 + 5, 0, "-2p54joiner", 3, 1],
+        [2.54 + 5.27, -1.5 * 2.54 + 5, 0, "-2p54joiner", 3, 1],
+        [3 * 2.54 + 5.27, 5,           0, "-2p54joiner", 1, 2],
+        [6.4 + 1.5, 5, 0, "chip", 3, 2, 0.8],
+        [1.2,  2.5, 90, "smd_res", RES0603, "472"],
+        [2.4,  2.5, 90, "smd_res", RES0603, "472"],
+        [1.2, -2.5, 90, "smd_res", RES0603, "472"],
+        [2.4, -2.5, 90, "smd_res", RES0603, "472"],
+
+        [10.35, -4, -90, "smd_res", RES0603, "181"],
+        [10.35,  4, -90, "smd_res", RES0603, "102"],
+
+        [12.89, 1.5 * 2.54 + 5, 0, "smd_cap", CAP0603, 0.85],
+        [12.89,-1.5 * 2.54 + 5, 0, "smd_cap", CAP0603, 0.85],
+   ],
+    [] // accessories
+];
+
+tiny_pcbs = [XIAO, MP1584EN, TP4056, ESP_01, LIPO_fuel_gauge];
+
+pcbs = [RAMPSEndstop, MT3608, PI_IO, ExtruderPCB, ZC_A0591, RPI_Pico, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, RPI3, RPI4, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
 
 pcbs_not_shown = [Melzi, Duex2, PSU12V1A, Keyes5p1];
 
-perfboards = [PERF74x51, PERF70x50, PERF60x40, PERF70x30, PERF80x20];
+perfboards = [PERF74x51, PERF70x51, PERF70x50, PERF60x40, PERF70x30, PERF80x20];
 
 use <pcb.scad>

vitamins/pin_header.scad

@@ -229,7 +229,7 @@ module pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt
     }
 }
 
-module jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false) { //! Draw JST XH connector
+module jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_colour = false, smt = false) { //! Draw JST XH connector
     colour = colour ? colour : hdr_base_colour(type);
     pin_colour = pin_colour ? pin_colour : hdr_pin_colour(type);
     pitch = hdr_pitch(type);
@@ -306,10 +306,12 @@ module jst_xh_header(type, pin_count, right_angle = false, colour = false, pin_c
 
     color(pin_colour)
         for(x = [0 : pin_count - 1]) {
+            below = !smt ? 0 : hdr_pin_below(type);
             verticalPinLength = right_angle ? hdr_pin_below(type) + ra_z + y_offset : hdr_pin_length(type);
             horizontalPinLength = hdr_pin_length(type) - hdr_pin_below(type) + ra_box_offset;
             translate([pitch * (x - (pin_count - 1) / 2), 0]) {
-                pin(type, verticalPinLength);
+                translate_z(below)
+                    pin(type, verticalPinLength - below);
 
                 if(right_angle) {
                     translate([0, -pinWidth / 2, ra_z - pinWidth / 2 + y_offset])

vitamins/pin_headers.scad

@@ -17,16 +17,19 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 
-//                               p     p     b    p     p       b         s    b                 b    p      r     r
-//                               i     i     e    i     i       a         o    o                 o    i      a     a
-//                               t     n     l    n     n       s         c    x                 x    n
-//                               c           o                  e         k                                  b     h
-//                               h     l     w    w     c                      s                 t    y
-//                                                              c         h    z                             o
+//                               p     p     b    p      p          b     s    b                 b    p      r   r
+//                               i     i     e    i      i          a     o    o                 o    i      a   a
+//                               t     n     l    n      n          s     c    x                 x    n
+//                               c           o                      e     k                                  b   h
+//                               h     l     w    w      c                     s                 t    y
+//                                                                  c     h    z                             o
 //                                                                                                           f
-2p54header    = ["2p54header",   2.54, 11.6, 3.2, 0.66, "gold", grey(20), 8.5, [0,   0,    8.7], 2.4, 0,     0,    0  ];
-jst_xh_header = ["jst_xh_header",2.5,  10,   3.4, 0.64, "gold", grey(90), 0,   [4.9, 5.75, 7],   0.8, 0.525, 0.6,  6.1];
-jst_ph_header = ["jst_ph_header",2.0,   9,   3.4, 0.64, silver, grey(90), 0,   [3.9, 4.5,  6],   0.6, 0.55,  0.25, 4.8];
+2p54header  = ["2p54header",   2.54, 11.6, 3.2, 0.66, gold,   grey(20), 8.5, [0,   0,    8.7], 2.4, 0,     0,    0  ];
+2p54joiner =  ["2p54joiner",   2.54, 6.86, 2.5, 0.66, gold,   grey(20), 8.5, [0,   0,    8.7], 2.4, 0,     0,    0  ]; // Cropped pins for joining PCBs
+
+jst_xh_header = ["jst_xh_header",2.5,  10, 3.4, 0.64, gold,   grey(90), 0,   [4.9, 5.75, 7],   0.8, 0.525, 0.6,  6.1];
+jst_ph_header = ["jst_ph_header",2.0,   9, 3.4, 0.64, silver, grey(90), 0,   [3.9, 4.5,  6],   0.6, 0.55,  0.25, 4.8];
+jst_zh_header = ["jst_zh_header",1.5, 7.4, 3.4, 0.5 , silver, grey(90), 0,   [3.0, 3.5,4.5],   0.5, 0.45,  0.25, 3.7];
 
 pin_headers = [ 2p54header ];
 

vitamins/psu.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! Powersupplies. Can be a simple cube or can be defined by a list of six faces, each with thickness, holes, cutouts, etc.
+//! Power supplies. Can be a simple cube or can be defined by a list of six faces, each with thickness, holes, cutouts, etc.
 //!
 //! Face order is bottom, top, left, right, front, back.
 //
@@ -44,6 +44,7 @@ function psu_name(type)              = type[1];     //! The part name
 function psu_length(type)            = type[2];     //! Length
 function psu_width(type)             = type[3];     //! Width
 function psu_height(type)            = type[4];     //! Height
+function psu_size(type)              = [psu_length(type), psu_width(type), psu_height(type)]; //! Size
 function psu_screw(type)             = type[5];     //! Screw type
 function psu_screw_hole_radius(type) = type[6];     //! Clearance hole for screw, bigger than normal on ATX
 function atx_psu(type)               = type[7];     //! True if an ATX style PSU
@@ -245,7 +246,7 @@ module psu(type) { //! Draw a power supply
                 }
         }
     }
-    // Special case for lighting type PSUs with teminals at the end
+    // Special case for lighting type PSUs with terminals at the end
     terminals = psu_terminals(type);
     if(terminals) {
         ft = psu_face_thickness(faces[f_front]);

vitamins/psus.scad

@@ -114,7 +114,7 @@ S_300_12 = [
         [// f_top, top
             [],// holes
             0.5,// thickness
-            [],// coutouts
+            [],// cutouts
             false,// grill
             [215/2 - 47.5, 115/2 - 37.5, fan50x15],
             [],//iec

vitamins/pulley.scad

@@ -36,7 +36,7 @@ function pulley_hub_length(type)       = type[7];  //! Hub length
 function pulley_bore(type)             = type[8];  //! Bore diameter for shaft
 function pulley_flange_dia(type)       = type[9];  //! Flange diameter
 function pulley_flange_thickness(type) = type[10]; //! Flange thickness
-function pulley_screw_length(type)     = type[11]; //! Grup screw length
+function pulley_screw_length(type)     = type[11]; //! Grub screw length
 function pulley_screw_z(type)          = type[12]; //! Grub screw position
 function pulley_screw(type)            = type[13]; //! Grub screw type
 function pulley_screws(type)           = type[14]; //! Number of grub screws

vitamins/rails.scad

@@ -16,33 +16,41 @@
 // You should have received a copy of the GNU General Public License along with NopSCADlib.
 // If not, see <https://www.gnu.org/licenses/>.
 //
+include <../core.scad>
 
 //
 // Rails
 //
-//                Wr  Hr  Emin    P   D    d    h                                       go    gw
-MGN5 = [ "MGN5",   5,  3.6,  5,   15, 3.6, 2.4, 0.8, M2_cs_cap_screw, M2_cs_cap_screw,  1,    1 ]; // Screw holes too small for M2 heads
-MGN7 = [ "MGN7",   7,  5,    5,   15, 4.3, 2.4, 2.6, M2_cap_screw,    M2_cs_cap_screw,  1.5,  1.5 ];
-MGN9 = [ "MGN9",   9,  6,    5,   20, 6.0, 3.5, 3.5, M3_cap_screw,    M3_cs_cap_screw,  1.5,  1.5 ];
-MGN12 =[ "MGN12", 12,  8,  7.5,   25, 6.0, 3.5, 4.5, M3_cap_screw,    M3_cs_cap_screw,  2.25, 2.75];
-MGN15 =[ "MGN15", 15, 10,   10,   40, 6.0, 3.5, 5.0, M3_cap_screw,    M3_cs_cap_screw,  2.5,  2.75 ];
-SSR15= [ "SSR15", 15, 12.5, 10,   60, 7.5, 4.5, 5.3, M4_cap_screw,    M4_cs_cap_screw,  2.5,  2.75 ];
+//                    Wr  Hr   Emin P   D    d    h                                       go    gw
+MGN5   = [ "MGN5",    5,  3.6,  5,  15, 3.6, 2.4, 0.8, M2_cs_cap_screw, M2_cs_cap_screw,  1,    1 ]; // Screw holes too small for M2 heads
+MGN7   = [ "MGN7",    7,  5,    5,  15, 4.3, 2.4, 2.6, M2_cap_screw,    M2_cs_cap_screw,  1.5,  1.5 ];
+MGN9   = [ "MGN9",    9,  6,    5,  20, 6.0, 3.5, 3.5, M3_cap_screw,    M3_cs_cap_screw,  1.5,  1.5 ];
+MGN12  = [ "MGN12",   12, 8,   7.5, 25, 6.0, 3.5, 4.5, M3_cap_screw,    M3_cs_cap_screw,  2.25, 2.75 ];
+MGN15  = [ "MGN15",   15, 10,   10, 40, 6.0, 3.5, 5.0, M3_cap_screw,    M3_cs_cap_screw,  2.5,  2.75 ];
+SSR15  = [ "SSR15",   15, 12.5, 10, 60, 7.5, 4.5, 5.3, M4_cap_screw,    M4_cs_cap_screw,  2.5,  2.75 ];
+HGH15CA= [ "HGH15CA", 15, 15,   20, 60, 7.5, 4.5, 5.3, M4_cap_screw,    M4_cs_cap_screw,  2.5,  2.75 ];
+HGH20CA= [ "HGH20CA", 20, 17.5, 20, 60, 9.5, 6.0, 8.5, M5_cap_screw,    M5_cs_cap_screw,  2.5,  2.75 ];
 //
 // Carriages
 //
-//                           L     L1    W   H   H1   C    B
-MGN5C_carriage  = ["MGN5C",  16,    9.6, 12,  6, 1.5, 0,   8, M2_cap_screw, MGN5 ];
-MGN7C_carriage  = ["MGN7C",  23,   14.3, 17,  8, 1.5, 8,  12, M2_cap_screw, MGN7 ];
-MGN7H_carriage  = ["MGN7H",  30.8, 21.8, 17,  8, 1.5,13,  12, M2_cap_screw, MGN7 ];
-MGN9C_carriage  = ["MGN9C",  29.7, 20.8, 20, 10, 2,  10,  15, M3_cap_screw, MGN9 ];
-MGN9H_carriage  = ["MGN9H",  39.9, 29.9, 20, 10, 2,  16,  15, M3_cap_screw, MGN9 ];
-MGN12C_carriage = ["MGN12C", 34.7, 21.7, 27, 13, 3,  15,  20, M3_cap_screw, MGN12 ];
-MGN12H_carriage = ["MGN12H", 45.4, 32.4, 27, 13, 3,  20,  20, M3_cap_screw, MGN12 ];
-MGN15C_carriage = ["MGN15C", 43.3, 27.7, 32, 16, 4,  20,  25, M3_cap_screw, MGN15 ];
-SSR15_carriage  = ["SSR15",  40.3, 23.3, 34, 24, 4.5, 0,  26, M4_cap_screw, SSR15 ];
+//                            L     L1    W   H   H1   C   B
+MGN5C_carriage  = [ "MGN5C",   16,    9.6, 12,  6, 1.5, 0,  8,  M2_cap_screw, MGN5 ];
+MGN7C_carriage  = [ "MGN7C",   23,   14.3, 17,  8, 1.5, 8,  12, M2_cap_screw, MGN7 ];
+MGN7H_carriage  = [ "MGN7H",   30.8, 21.8, 17,  8, 1.5, 13, 12, M2_cap_screw, MGN7 ];
+MGN9C_carriage  = [ "MGN9C",   29.7, 20.8, 20, 10, 2,   10, 15, M3_cap_screw, MGN9 ];
+MGN9H_carriage  = [ "MGN9H",   39.9, 29.9, 20, 10, 2,   16, 15, M3_cap_screw, MGN9 ];
+MGN12C_carriage = [ "MGN12C",  34.7, 21.7, 27, 13, 3,   15, 20, M3_cap_screw, MGN12 ];
+MGN12H_carriage = [ "MGN12H",  45.4, 32.4, 27, 13, 3,   20, 20, M3_cap_screw, MGN12 ];
+MGN15C_carriage = [ "MGN15C",  43.3, 27.7, 32, 16, 4,   20, 25, M3_cap_screw, MGN15 ];
+HGH15CA_carriage= [ "HGH15CA", 61.4, 39.4, 34, 28, 4,   26, 26, M4_cap_screw, HGH15CA ];
+HGH20CA_carriage= [ "HGH20CA", 77.5, 50.5, 44, 30, 4.6, 35, 32, M5_cap_screw, HGH20CA ];
+SSR15_carriage  = [ "SSR15",   40.3, 23.3, 34, 24, 4.5, 0,  26, M4_cap_screw, SSR15 ];
 
-rails = [MGN5, MGN7, MGN9, MGN12, MGN15, SSR15];
+rails = [MGN5, MGN7, MGN9, MGN12, MGN15, SSR15, HGH15CA, HGH20CA];
 
-carriages = [MGN5C_carriage, MGN7C_carriage, MGN7H_carriage, MGN9C_carriage, MGN9H_carriage, MGN12C_carriage, MGN12H_carriage, MGN12H_carriage, MGN15C_carriage, SSR15_carriage];
+carriages = [MGN5C_carriage, MGN7C_carriage, MGN7H_carriage, MGN9C_carriage, MGN9H_carriage, 
+            MGN12C_carriage, MGN12H_carriage, MGN12H_carriage, MGN15C_carriage, SSR15_carriage,
+            HGH15CA_carriage, HGH20CA_carriage
+            ];
 
 use <rail.scad>

vitamins/ring_terminal.scad

@@ -36,7 +36,7 @@ function ringterm_screw(type)        = type[7];    //! Screw type
 function ringterm_crimp_length(type) = type[8];    //! If non-zero the length of the crimp tube
 function ringterm_extent(type)    = ringterm_length(type) / sqrt(2); //! Space to leave
 
-module ring_terminal(type) { //! Draw specifeid ring terminal
+module ring_terminal(type) { //! Draw specified ring terminal
     screw = ringterm_screw(type);
     d = 2 * screw_radius(screw);
     crimp = ringterm_crimp_length(type);