Added pictures and documentation for extrusions.

Initial submission of E2020 aluminium extrusion.

lib.scad

@@ -62,6 +62,7 @@ include <vitamins/spools.scad>
 include <vitamins/mains_sockets.scad>
 include <vitamins/ldrs.scad>
 include <vitamins/geared_steppers.scad>
+include <vitamins/extrusions.scad>
 
 use <vitamins/jack.scad>
 use <vitamins/meter.scad>

libtest.scad

@@ -32,6 +32,7 @@ use <tests/cable_strips.scad>
 use <tests/components.scad>
 use <tests/d_connectors.scad>
 use <tests/displays.scad>
+use <tests/extrusions.scad>
 use <tests/fans.scad>
 use <tests/fuseholder.scad>
 use <tests/geared_steppers.scad>
@@ -91,6 +92,7 @@ use <tests/strap_handle.scad>
 use <tests/ssr_shroud.scad>
 use <tests/psu_shroud.scad>
 use <tests/flat_hinge.scad>
+use <tests/pcb_mount.scad>
 
 x5 = 800;
 
@@ -151,7 +153,7 @@ leadnuts_y = pillars_y + 40;
 pulleys_y = leadnuts_y +40;
 hot_ends_y = pulleys_y + 60;
 linear_bearings_y = hot_ends_y + 50;
-sheets_y = linear_bearings_y + 50;
+sheets_y = linear_bearings_y + 100;
 pcbs_y = sheets_y + 40;
 displays_y = pcbs_y + 150;
 fans_y = displays_y + 100;
@@ -202,6 +204,10 @@ translate([x0, linear_bearings_y]) {
     rods();
 }
 
+translate([x0+120, linear_bearings_y+30]) {
+    extrusions();
+}
+
 translate([x0 + 10, hot_ends_y])
     hot_ends();
 
@@ -304,6 +310,9 @@ translate([x3, veroboard_y])
 translate([x3 + 70, veroboard_y + 30])
     geared_steppers();
 
+translate([x3 + 140, veroboard_y + 20])
+    pcb_mounts();
+
 translate([x3, d_connectors_y])
     d_connectors();
 

printed/butt_box.scad

@@ -50,6 +50,10 @@ function bbox_name(type)       = type[8] ? type[8] : "bbox"; //! Optional name i
 function bbox_skip_blocks(type)= type[9] ? type[9] : [];  //! List of fixing blocks to skip, used to allow a hinged panel for example
 function star_washers(type)    = type[10] ? type[10] : is_undef(type[10]); //! Set to false to remove star washers.
 
+function bbox_volume(type) = bbox_width(type) * bbox_depth(type) * bbox_height(type) / 1000000; //! Internal volume in litres
+function bbox_area(type) = let(w =  bbox_width(type), d = bbox_depth(type), h = bbox_height(type)) //! Internal surdface area in m^2
+    2 * (w * d + w * h + d * h) / 1000000;
+
 module bbox_shelf_blank(type) { //! 2D template for a shelf
     dxf(str(bbox_name(type), "_shelf"));
 
@@ -165,7 +169,7 @@ module bbox_right_blank(type, sheet = false) { //! 2D template for the right sid
     }
 }
 
-module bbox_front_blank(type, sheet = false) { //! 2D template for the front
+module bbox_front_blank(type, sheet = false, width = 0) { //! 2D template for the front
     dxf(str(bbox_name(type), "_front"));
 
     t = sheet_thickness(bbox_sheets(type));
@@ -174,7 +178,7 @@ module bbox_front_blank(type, sheet = false) { //! 2D template for the front
 
     difference() {
         translate([0, (bt - bb) / 2])
-            sheet_2D(subst_sheet(type, sheet), bbox_width(type) + 2 * t, bbox_height(type) + bb + bt);
+            sheet_2D(subst_sheet(type, sheet), max(bbox_width(type) + 2 * t, width), bbox_height(type) + bb + bt);
 
         drill_holes(type, rotate([-90, 0, 0]) * translate([0, bbox_depth(type) / 2]));
     }
@@ -205,7 +209,7 @@ module _bbox_assembly(type, top = true, base = true, left = true, right = true,
     width = bbox_width(type);
     depth = bbox_depth(type);
     height = bbox_height(type);
-    echo("Box:", width, depth, height);
+    echo("Box:", width, depth, height, volume = bbox_volume(type), area = bbox_area(type));
 
     t = sheet_thickness(bbox_sheets(type));
     bt = sheet_thickness(bbox_base_sheet(type));

printed/cable_grommets.scad

@@ -195,12 +195,15 @@ module mouse_grommet_assembly(r, thickness)
 module ribbon_grommet_20_3_stl() ribbon_grommet(20, 3);
 module mouse_grommet_15_3_stl() mouse_grommet(1.5, 3);
 module mouse_grommet_20_3_stl() mouse_grommet(2, 3);
+module mouse_grommet_25_3_stl() mouse_grommet(2.5, 3);
 module mouse_grommet_30_3_stl() mouse_grommet(3, 3);
 
 module round_grommet_bottom_30_stl() round_grommet_bottom(3);
 module round_grommet_bottom_40_stl() round_grommet_bottom(4);
+module round_grommet_bottom_50_stl() round_grommet_bottom(5);
 module round_grommet_bottom_60_stl() round_grommet_bottom(6);
 
 module round_grommet_top_30_3_stl() round_grommet_top(3, 3);
 module round_grommet_top_40_3_stl() round_grommet_top(4, 3);
+module round_grommet_top_50_3_stl() round_grommet_top(5, 3);
 module round_grommet_top_60_3_stl() round_grommet_top(6, 3);

printed/pcb_mount.scad

@@ -0,0 +1,124 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! A frame to mount a PCB by its corners when it has no mounting holes.
+//! The stl must be given a parameterless wrapper in the project that uses it.
+//
+include <../core.scad>
+include <../vitamins/screws.scad>
+use <../vitamins/pcb.scad>
+
+clearance = 0.2;
+min_wall = extrusion_width * 2;
+wall = 2;
+
+overlap = 2;
+
+screw = M3_cap_screw;
+screw_clearance_r = 3.1 / 2;
+pillar_r = corrected_radius(screw_clearance_r) + wall;
+
+function pillar_x_pitch(pcb) = pcb_length(pcb) + 2 * clearance + 2 * (pillar_r - overlap) / sqrt(2); //! x pitch of screw pillars
+function pillar_y_pitch(pcb) = pcb_width(pcb)  + 2 * clearance + 2 * (pillar_r - overlap) / sqrt(2); //! y pitch of screw pillars
+
+function pcb_mount_length(pcb) = pillar_x_pitch(pcb) + 2 * pillar_r; //! Outside length of the mount
+function pcb_mount_width(pcb)  = pillar_y_pitch(pcb) + 2 * pillar_r; //! Outside width of the mount
+
+frame_w = 3;
+frame_t = 2;
+
+washer_thickness = 1.25;
+
+module pcb_mount_screw_positions(pcb) //! Positions of the screws and pillars
+    for(x = [-1, 1], y = [-1, 1])
+        translate([x * pillar_x_pitch(pcb) / 2, y * pillar_y_pitch(pcb) / 2])
+            children();
+
+module pcb_mount_holes(pcb, h = 0)          //! Drill holes for PCB mount
+    pcb_mount_screw_positions(pcb)
+        drill(screw_clearance_radius(screw), h);
+
+module pcb_mount_ring()
+    difference() {
+        circle(pillar_r);
+
+        poly_circle(screw_clearance_r);
+    }
+
+module pcb_mount_washer_stl() //! A plastic washer to clamp a PCB
+    linear_extrude(height = washer_thickness)
+        pcb_mount_ring();
+
+module pcb_mount(pcb, height = 5, washers = true) { //! Make the STL of a pcb mount for the specified PCB.
+    stl(str("pcb_mount_", pcb[0], "_", height));
+
+    y_pitch = pcb_width(pcb) > 4 * pillar_r + 4 ? pillar_r + 1
+                                                : pcb_width(pcb) / 2 + frame_w + 1 + pillar_r;
+
+    if(washers)
+        for(x = [-1, 1], y = [-1, 1])
+            translate([x * (pillar_r + 1), y * y_pitch, 0])
+                pcb_mount_washer_stl();
+
+    for(x = [-1, 1])
+        translate([x * pillar_x_pitch(pcb) / 2, 0, frame_t / 2])
+            cube([frame_w, pillar_y_pitch(pcb) - 2 * wall, frame_t], center = true);
+
+    for(y = [-1, 1])
+        translate([0, y * pillar_y_pitch(pcb) / 2, frame_t / 2])
+            cube([pillar_x_pitch(pcb) - 2 * wall, frame_w, frame_t], center = true);
+
+    pcb_mount_screw_positions(pcb)
+        linear_extrude(height = height)
+            pcb_mount_ring();
+
+    linear_extrude(height = height + pcb_thickness(pcb) - layer_height)
+        difference() {
+            pcb_mount_screw_positions(pcb)
+                pcb_mount_ring();
+
+            square([pcb_length(pcb) + 2 * clearance, pcb_width(pcb) + 2 * clearance], center = true);
+        }
+}
+
+module pcb_mount_assembly(pcb, thickness, height = 5) { //! A PCB mount assembly with fasteners
+    translate_z(height)
+        pcb(pcb);
+
+    color(pp1_colour) pcb_mount(pcb, washers = false);
+
+    washer = screw_washer(screw);
+    nut = screw_nut(screw);
+    t = pcb_thickness(pcb);
+    screw_length = screw_longer_than(height + t + washer_thickness + thickness + washer_thickness(washer) + nut_thickness(nut, true));
+
+    pcb_mount_screw_positions(pcb) {
+        translate_z(height + t) {
+            color(pp2_colour) pcb_mount_washer_stl();
+
+            translate_z(washer_thickness)
+                screw(screw, screw_length);
+        }
+
+        translate_z(-thickness)
+            vflip()
+                nut_and_washer(nut, true);
+    }
+}

readme.md

@@ -28,24 +28,25 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
 <tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
 <tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
 <tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Pcb_mount">Pcb_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Microview">Microview</a> </td><td></td><td></td><td></td><td></td></tr>
 <tr><td> <a href = "#Modules">Modules</a> </td><td></td><td></td><td></td><td></td></tr>
 </table>
 
@@ -260,7 +261,7 @@ Models of radial blowers.
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | ```blower(PE4020)``` |  Blower Pengda Technology 4020 |
-|   1 | ```blower(RM5015)``` |  Blower Runda RB5015 |
+|   1 | ```blower(RB5015)``` |  Blower Runda RB5015 |
 |   3 | ```screw(M3_cap_screw, 20)``` |  Screw M3 cap x 20mm |
 |   2 | ```screw(M4_cap_screw, 25)``` |  Screw M4 cap x 25mm |
 |   3 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
@@ -581,9 +582,58 @@ LCD dispays.
 | ---:|:--- |:---|
 |   1 | ```display(HDMI5)``` |  HDMI display 5" |
 |   1 | ```display(LCD1602A)``` |  LCD display 1602A |
+|   1 | ```display(LCDS7282B)``` |  LCD display S-7282B |
 |   1 | ```display(SSD1963_4p3)``` |  LCD display SSD1963 4.3" |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Extrusions"></a>
+## Extrusions
+Aluminium  extrusion.
+
+
+[vitamins/extrusions.scad](vitamins/extrusions.scad) Object definitions.
+
+[vitamins/extrusion.scad](vitamins/extrusion.scad) Implementation.
+
+[tests/extrusions.scad](tests/extrusions.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```extrusion_center_hole(type)``` | Diameter of center hole |
+| ```extrusion_center_square(type)``` | Size of center square |
+| ```extrusion_channel_width(type)``` | Channel width |
+| ```extrusion_channel_width_internal(type)``` | Internal channel width |
+| ```extrusion_corner_hole(type)``` | Diameter of corner hole |
+| ```extrusion_fillet(type)``` | Radius of corner fillet |
+| ```extrusion_height(type)``` | Height of extrusion |
+| ```extrusion_spar_thickness(type)``` | Spar thickness |
+| ```extrusion_tab_thickness(type)``` | Tab thickness |
+| ```extrusion_width(type)``` | Width of extrusion |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```extrusion(type, length, cornerHole = false)``` | Draw the specified extrusion |
+
+![extrusions](tests/png/extrusions.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```extrusion(E2020, 80)``` |  Extrusion E2020 x 80mm |
+|   1 | ```extrusion(E2040, 80)``` |  Extrusion E2040 x 80mm |
+|   1 | ```extrusion(E2060, 80)``` |  Extrusion E2060 x 80mm |
+|   1 | ```extrusion(E2080, 80)``` |  Extrusion E2080 x 80mm |
+|   1 | ```extrusion(E3030, 80)``` |  Extrusion E3030 x 80mm |
+|   1 | ```extrusion(E3060, 80)``` |  Extrusion E3060 x 80mm |
+|   1 | ```extrusion(E4040, 80)``` |  Extrusion E4040 x 80mm |
+|   1 | ```extrusion(E4080, 80)``` |  Extrusion E4080 x 80mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -615,16 +665,11 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 | ```fan_thickness(type)``` | Thickness of the frame |
 | ```fan_width(type)``` | Width of square |
 
-### Functions
-| Function | Description |
-|:--- |:--- |
-| ```fan_screw_length(type, thickness)``` | Screw length required |
-
 ### Modules
 | Module | Description |
 |:--- |:--- |
 | ```fan(type)``` | Draw specified fan, origin in the centre |
-| ```fan_assembly(type, thickness, include_fan = true, screw = false)``` | Fan with its fasteners |
+| ```fan_assembly(type, thickness, include_fan = true, screw = false, full_depth = false)``` | Fan with its fasteners |
 | ```fan_hole_positions(type, z = undef)``` | Position children at the screw hole positions |
 | ```fan_holes(type, poly = false, screws = true, h = 100)``` | Make all the holes for the fan, or just the aperture if ```screws``` is false. Set ```poly``` true for poly_holes. |
 
@@ -634,6 +679,7 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | ```fan(fan120x25)``` |  Fan 120mm x 25mm |
+|   1 | ```fan(fan17x8)``` |  Fan 17mm x 8mm |
 |   1 | ```fan(fan25x10)``` |  Fan 25mm x 10mm |
 |   1 | ```fan(fan30x10)``` |  Fan 30mm x 10mm |
 |   1 | ```fan(fan40x11)``` |  Fan 40mm x 11mm |
@@ -643,17 +689,20 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 |   1 | ```fan(fan70x15)``` |  Fan 70mm x 15mm |
 |   1 | ```fan(fan80x25)``` |  Fan 80mm x 25mm |
 |   1 | ```fan(fan80x38)``` |  Fan 80mm x 38mm |
+|   4 | ```nut(M2_nut, nyloc = true)``` |  Nut M2 x 1.6mm nyloc |
 |   4 | ```nut(M2p5_nut, nyloc = true)``` |  Nut M2.5 x 2.2mm nyloc |
 |   8 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
 |  28 | ```nut(M4_nut, nyloc = true)``` |  Nut M4 x 3.2mm nyloc |
+|   4 | ```screw(M2_cap_screw, 16)``` |  Screw M2 cap x 16mm |
 |   4 | ```screw(M2p5_pan_screw, 20)``` |  Screw M2.5 pan x 20mm |
 |   8 | ```screw(M3_dome_screw, 20)``` |  Screw M3 dome x 20mm |
 |  20 | ```screw(M4_dome_screw, 16)``` |  Screw M4 dome x 16mm |
 |   4 | ```screw(M4_dome_screw, 25)``` |  Screw M4 dome x 25mm |
 |   4 | ```screw(M4_dome_screw, 30)``` |  Screw M4 dome x 30mm |
-|   4 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
-|   8 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
-|  28 | ```washer(M4_washer)``` |  Washer  M4 x 9mm x 0.8mm |
+|   8 | ```washer(M2_washer)``` |  Washer  M2 x 5mm x 0.3mm |
+|   8 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
+|  12 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
+|  32 | ```washer(M4_washer)``` |  Washer  M4 x 9mm x 0.8mm |
 
 
 <a href="#top">Top</a>
@@ -829,7 +878,7 @@ Needs updating as mostly obsolete versions.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| ```hot_end(type, filament, naked = false)``` | Draw specified hot end |
+| ```hot_end(type, filament, naked = false, resistor_wire_rotate = [0,0,0])``` | Draw specified hot end |
 
 ![hot_ends](tests/png/hot_ends.png)
 
@@ -1657,6 +1706,13 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| ```hdmi_depth(type)``` | Front to back depth |
+| ```hdmi_height(type)``` | Outside height above the PCB |
+| ```hdmi_height1(type)``` | Inside height at the sides |
+| ```hdmi_height2(type)``` | Inside height in the middle |
+| ```hdmi_thickness(type)``` | Wall thickness of the metal |
+| ```hdmi_width1(type)``` | Inside width at the top |
+| ```hdmi_width2(type)``` | Inside width at the bottom |
 | ```pcb_accessories(type)``` | List of accessories to go on the BOM, SD cards, USB cables, etc. |
 | ```pcb_colour(type)``` | Colour of the subtrate |
 | ```pcb_components(type)``` | List of components |
@@ -1675,7 +1731,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| ```pcb_component_position(type, name, index = 0)``` | Return x y position of specified component |
 | ```pcb_coord(type, p)``` | Convert offsets from the edge to coordinates relative to the centre |
+| ```pcb_grid_pos(type, x, y, z = 0)``` | Returns a pcb grid position |
 | ```pcb_screw(type, cap = hs_cap)``` | Mounting screw type |
 
 ### Modules
@@ -1683,8 +1741,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |:--- |:--- |
 | ```barrel_jack(cutout = false)``` | Draw barrel power jack |
 | ```chip(length, width, thickness, colour, cutout = false)``` | Draw a coloured cube to represent a chip, or other rectangular component |
+| ```flat_flex(cutout = false)``` | Draw flat flexistrip connector as used on RPI0 |
 | ```flex(cutout = false)``` | Draw flexistrip connector |
-| ```hdmi(cutout = false)``` | Draw HDMI socket |
+| ```hdmi(type, cutout = false)``` | Draw HDMI socket |
 | ```jack(cutout = false)``` | Draw 3.5mm jack |
 | ```molex_254(ways)``` | Draw molex header |
 | ```pcb(type)``` | Draw specified PCB |
@@ -1694,7 +1753,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | ```pcb_component_position(type, name)``` | Position child at the specified component position |
 | ```pcb_components(type, cutouts = false, angle = undef)``` | Draw list of PCB components on the PCB |
 | ```pcb_cutouts(type, angle = undef)``` | Make cut outs to clear components on a PCB |
-| ```pcb_grid(type, x, y, z = 0)``` | Positions children at specified grid positions |
+| ```pcb_grid(type, x, y, z = 0)``` | Positions children at specified grid position |
 | ```pcb_screw_positions(type)``` | Positions children at the mounting hole positions |
 | ```pcb_spacer(screw, height, wall = 1.8, taper = 0)``` | Generate STL for PCB spacer |
 | ```rj45(cutout = false)``` | Draw RJ45 Ethernet connector |
@@ -1716,14 +1775,15 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | ```pcb(DuetE)``` |  Duet 2 Ethernet electronics |
 |   1 | ```pcb(Duex2)``` |  Duex2 expansion board |
 |   1 | ```pcb(Duex5)``` |  Duex5 expasnion board |
+|   1 | ```pcb(EnviroPlus)``` |  Enviro+ |
 |   1 | ```pcb(ExtruderPCB)``` |  Extruder connection PCB |
 |   1 | ```pcb(Keyes5p1)``` |  Keyes5.1 Arduino Uno expansion board |
 |   1 | ```pcb(Melzi)``` |  Melzi electronics |
-|   3 |  |  Micro SD card |
+|   4 |  |  Micro SD card |
 |   1 | ```molex_254(2)``` |  Molex KK header 2 way |
 |   1 | ```molex_254(3)``` |  Molex KK header 3 way |
 |  16 | ```nut(M2_nut, nyloc = true)``` |  Nut M2 x 1.6mm nyloc |
-|  20 | ```nut(M2p5_nut, nyloc = true)``` |  Nut M2.5 x 2.2mm nyloc |
+|  28 | ```nut(M2p5_nut, nyloc = true)``` |  Nut M2.5 x 2.2mm nyloc |
 |  12 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
 |  12 | ```nut(M4_nut, nyloc = true)``` |  Nut M4 x 3.2mm nyloc |
 |   1 | ```pcb(PI_IO)``` |  PI_IO V2 |
@@ -1735,19 +1795,22 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | ```pcb(PERF80x20)``` |  Perfboard 80 x 20mm |
 |   1 | ```pin_socket(2p54header, 13, 2, right_angle = true)``` |  Pin socket 13 x 2 right_angle |
 |   1 | ```pcb(RPI3)``` |  Raspberry Pi 3 |
-|   8 | ```screw(M2_cap_screw, 20)``` |  Screw M2 cap x 20mm |
-|   8 | ```screw(M2_cap_screw, 25)``` |  Screw M2 cap x 25mm |
+|   1 | ```pcb(RPI0)``` |  Raspberry Pi Zero |
+|  16 | ```screw(M2_cap_screw, 25)``` |  Screw M2 cap x 25mm |
 |   4 | ```screw(M2p5_cap_screw, 16)``` |  Screw M2.5 cap x 16mm |
-|  12 | ```screw(M2p5_pan_screw, 20)``` |  Screw M2.5 pan x 20mm |
-|   4 | ```screw(M2p5_pan_screw, 30)``` |  Screw M2.5 pan x 30mm |
-|   4 | ```screw(M3_cap_screw, 25)``` |  Screw M3 cap x 25mm |
+|   8 | ```screw(M2p5_cap_screw, 20)``` |  Screw M2.5 cap x 20mm |
+|   8 | ```screw(M2p5_pan_screw, 20)``` |  Screw M2.5 pan x 20mm |
+|   4 | ```screw(M2p5_pan_screw, 25)``` |  Screw M2.5 pan x 25mm |
+|   4 | ```screw(M2p5_pan_screw, 35)``` |  Screw M2.5 pan x 35mm |
 |   8 | ```screw(M3_cap_screw, 30)``` |  Screw M3 cap x 30mm |
-|  12 | ```screw(M4_cap_screw, 30)``` |  Screw M4 cap x 30mm |
+|   4 | ```screw(M3_cap_screw, 35)``` |  Screw M3 cap x 35mm |
+|   4 | ```screw(M4_cap_screw, 30)``` |  Screw M4 cap x 30mm |
+|   8 | ```screw(M4_cap_screw, 35)``` |  Screw M4 cap x 35mm |
 |   3 | ```terminal_35(2)``` |  Terminal block 2 way 3.5mm |
 |   2 | ```green_terminal(gt_2p54, 4)``` |  Terminal block 4 way 0.1" |
 |   1 |  |  USB A to Mini B lead |
 |  16 | ```washer(M2_washer)``` |  Washer  M2 x 5mm x 0.3mm |
-|  20 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
+|  28 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
 |  12 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
 |  12 | ```washer(M4_washer)``` |  Washer  M4 x 9mm x 0.8mm |
 |   1 | ```pcb(ZC_A0591)``` |  ZC-A0591 ULN2003 driver PCB |
@@ -1755,21 +1818,23 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Printed
 | Qty | Filename |
 | ---:|:--- |
-|   4 | pcb_spacer20110.stl |
-|   4 | pcb_spacer20120.stl |
 |   4 | pcb_spacer20130.stl |
 |   4 | pcb_spacer20140.stl |
+|   4 | pcb_spacer20150.stl |
+|   4 | pcb_spacer20160.stl |
 |   4 | pcb_spacer25100_2.stl |
-|   4 | pcb_spacer25210.stl |
+|   4 | pcb_spacer25110_2.stl |
+|   4 | pcb_spacer25120_2.stl |
+|   4 | pcb_spacer25230.stl |
 |   4 | pcb_spacer2570.stl |
-|   4 | pcb_spacer2580_2.stl |
-|   4 | pcb_spacer2590_2.stl |
-|   4 | pcb_spacer30150.stl |
-|   4 | pcb_spacer30160.stl |
-|   4 | pcb_spacer30200.stl |
-|   4 | pcb_spacer40170.stl |
-|   4 | pcb_spacer40180.stl |
+|   4 | pcb_spacer2580.stl |
+|   4 | pcb_spacer2590.stl |
+|   4 | pcb_spacer30170.stl |
+|   4 | pcb_spacer30180.stl |
+|   4 | pcb_spacer30220.stl |
 |   4 | pcb_spacer40190.stl |
+|   4 | pcb_spacer40200.stl |
+|   4 | pcb_spacer40210.stl |
 
 
 <a href="#top">Top</a>
@@ -1851,17 +1916,18 @@ Pin headers and sockets, etc.
 | ```box_header(type, cols = 1, rows = 1, smt = false, cutout = false)``` | Draw box header |
 | ```idc_transition(type, cols = 5, skip = [], cutout = false)``` | Draw IDC transition header |
 | ```pin(type, length = undef)``` | Draw a header pin |
-| ```pin_header(type, cols = 1, rows = 1, smt = false, cutout = false)``` | Draw pin header |
-| ```pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, cutout = false)``` | Draw pin socket |
+| ```pin_header(type, cols = 1, rows = 1, smt = false, right_angle = false, cutout = false)``` | Draw pin header |
+| ```pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt = false, cutout = false)``` | Draw pin socket |
 
 ![pin_headers](tests/png/pin_headers.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | ```box_header(2p54header102)``` |  Box header 10 x 2 |
+|   1 | ```box_header(2p54header, 10, 2)``` |  Box header 10 x 2 |
 |   1 | ```idc_transition(2p54header, 10)``` |  IDC transition header 10 x 2 |
-|   1 | ```pin_header(2p54header102)``` |  Pin header 10 x 2 |
+|   1 | ```pin_header(2p54header, 10, 2)``` |  Pin header 10 x 2 |
+|   1 | ```pin_header(2p54header, 10, 2, right_angle = true)``` |  Pin header 10 x 2 right_angle |
 |   1 | ```pin_socket(2p54header, 10, 2)``` |  Pin socket 10 x 2 |
 |   1 | ```pin_socket(2p54header, 10, 2, right_angle = true)``` |  Pin socket 10 x 2 right_angle |
 
@@ -2107,6 +2173,7 @@ Ring terminals and earth assemblies for DiBond panels.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| ```ringterm_crimp_length(type)``` | If non-zero the length of the crimp tube |
 | ```ringterm_hole(type)``` | Wire hole diameter |
 | ```ringterm_id(type)``` | Inside diameter |
 | ```ringterm_length(type)``` | Length of the tail including the ring |
@@ -2132,12 +2199,13 @@ Ring terminals and earth assemblies for DiBond panels.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   2 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
+|   3 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
 |   1 | ```ring_terminal(M3_ringterm)``` |  Ring terminal 3mm |
 |   1 | ```ring_terminal(M3_ringterm_cs)``` |  Ring terminal 3mm |
+|   1 | ```ring_terminal(M3_ringterm_crimp)``` |  Ring terminal crimp 3mm |
 |   1 | ```screw(M3_cap_screw, 10)``` |  Screw M3 cap x 10mm |
-|   1 | ```screw(M3_dome_screw, 10)``` |  Screw M3 dome x 10mm |
-|   4 | ```star_washer(M3_washer)``` |  Washer star M3 x 0.5mm |
+|   2 | ```screw(M3_dome_screw, 10)``` |  Screw M3 dome x 10mm |
+|   6 | ```star_washer(M3_washer)``` |  Washer star M3 x 0.5mm |
 
 
 <a href="#top">Top</a>
@@ -2145,7 +2213,7 @@ Ring terminals and earth assemblies for DiBond panels.
 ---
 <a name="Rockers"></a>
 ## Rockers
-Rocket switch. Also used for neon indicator in the same form factor.
+Rocker switch. Also used for neon indicator in the same form factor.
 
 
 [vitamins/rockers.scad](vitamins/rockers.scad) Object definitions.
@@ -2470,6 +2538,7 @@ Filament spool models
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | ```spool(spool_200x55)``` |  Filament spool 200 x 55 |
+|   1 | ```spool(spool_200x60)``` |  Filament spool 200 x 60 |
 |   1 | ```spool(spool_300x85)``` |  Filament spool 300 x 85 |
 |   1 | ```spool(spool_300x88)``` |  Filament spool 300 x 88 |
 
@@ -3229,6 +3298,12 @@ Uses [fixing blocks](#fixing_block) and [corner blocks](#corner_block).
 | ```bbox_width(type)``` | Internal width |
 | ```star_washers(type)``` | Set to false to remove star washers. |
 
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```bbox_area(type)``` | Internal surdface area in m^2 |
+| ```bbox_volume(type)``` | Internal volume in litres |
+
 ### Modules
 | Module | Description |
 |:--- |:--- |
@@ -3238,7 +3313,7 @@ Uses [fixing blocks](#fixing_block) and [corner blocks](#corner_block).
 | ```bbox_base(type)``` | Default base, can be overridden to customise |
 | ```bbox_base_blank(type)``` | 2D template for the base |
 | ```bbox_front(type)``` | Default front, can be overridden to customise |
-| ```bbox_front_blank(type, sheet = false)``` | 2D template for the front |
+| ```bbox_front_blank(type, sheet = false, width = 0)``` | 2D template for the front |
 | ```bbox_left(type)``` | Default left side, can be overridden to customise |
 | ```bbox_left_blank(type, sheet = false)``` | 2D template for the left side |
 | ```bbox_right(type)``` | Default right side, can be overridden to customise |
@@ -3556,6 +3631,7 @@ The ring spacing as well as the number of spokes can be specified, if zero a gas
 | Qty | Filename |
 | ---:|:--- |
 |   1 | fan_guard_120.stl |
+|   1 | fan_guard_17.stl |
 |   1 | fan_guard_25.stl |
 |   1 | fan_guard_30.stl |
 |   1 | fan_guard_40.stl |
@@ -3830,6 +3906,54 @@ Printed handle that can be printed without needing support material due to its t
 |   1 | handle_assembly |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Pcb_mount"></a>
+## Pcb_mount
+A frame to mount a PCB by its corners when it has no mounting holes.
+The stl must be given a parameterless wrapper in the project that uses it.
+
+
+[printed/pcb_mount.scad](printed/pcb_mount.scad) Implementation.
+
+[tests/pcb_mount.scad](tests/pcb_mount.scad) Code for this example.
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```pcb_mount_length(pcb)``` | Outside length of the mount |
+| ```pcb_mount_width(pcb)``` | Outside width of the mount |
+| ```pillar_x_pitch(pcb)``` | x pitch of screw pillars |
+| ```pillar_y_pitch(pcb)``` | y pitch of screw pillars |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```pcb_mount(pcb, height = 5, washers = true)``` | Make the STL of a pcb mount for the specified PCB. |
+| ```pcb_mount_assembly(pcb, thickness, height = 5)``` | A PCB mount assembly with fasteners |
+| ```pcb_mount_holes(pcb, h = 0)``` | Drill holes for PCB mount |
+| ```pcb_mount_screw_positions(pcb)``` | Positions of the screws and pillars |
+| ```pcb_mount_washer_stl()``` | A plastic washer to clamp a PCB |
+
+![pcb_mount](tests/png/pcb_mount.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   4 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
+|   1 | ```pcb(PI_IO)``` |  PI_IO V2 |
+|   1 | ```pin_socket(2p54header, 13, 2)``` |  Pin socket 13 x 2 |
+|   4 | ```screw(M3_cap_screw, 16)``` |  Screw M3 cap x 16mm |
+|   3 | ```terminal_35(2)``` |  Terminal block 2 way 3.5mm |
+|   4 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
+
+### Printed
+| Qty | Filename |
+| ---:|:--- |
+|   1 | pcb_mount_PI_IO_5.stl |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -4283,7 +4407,7 @@ Layout objects in a line with equal gaps given a vector of their widths.
 ---
 <a name="Maths"></a>
 ## Maths
-Maths utilities for minapulating vectors and matrices.
+Maths utilities for manipulating vectors and matrices.
 
 
 [utils/maths.scad](utils/maths.scad) Implementation.

tests/extrusions.scad

@@ -0,0 +1,30 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/extrusions.scad>
+
+module extrusions()
+    layout([for(e = extrusions) extrusion_width(e)], 10)
+        extrusion(extrusions[$i], 80);
+
+if ($preview)
+    extrusions();
+

tests/hygrometer.scad

@@ -0,0 +1,22 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+use <../vitamins/hygrometer.scad>
+
+if($preview)
+    hygrometer();

tests/pcb_mount.scad

@@ -0,0 +1,35 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../lib.scad>
+use <../printed/pcb_mount.scad>
+
+PI_IO = ["PI_IO", "PI_IO V2",       35.56, 25.4, 1.6, 0,    0,   0, "green", true, [],
+    [[(3.015 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.685) * 25.4, 90, "term35", 2],
+     [(3.46  - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69)  * 25.4, 90, "term35", 2],
+     [(3.91  - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69)  * 25.4, 90, "term35", 2],
+     [(3.4   - 2.7) * 25.4,          (4.5 - 4.15)  * 25.4,  0, "2p54socket", 13, 2],
+    ], []];
+
+module pcb_mounts()
+    if($preview)
+        pcb_mount_assembly(PI_IO, 3);
+    else
+        pcb_mount(PI_IO);
+
+pcb_mounts();

tests/pin_headers.scad

@@ -28,15 +28,18 @@ module pin_headers()
         idc_transition(pin_headers[$i], 10);
 
         translate([0, 20])
-            pin_header(pin_headers[$i], 10, 2);
+            pin_header(pin_headers[$i], 10, 2, right_angle = true);
 
         translate([0, 40])
+            pin_header(pin_headers[$i], 10, 2);
+
+        translate([0, 60])
             box_header(pin_headers[$i], 10, 2);
 
-        translate([0, 65])
+        translate([0, 80])
             pin_socket(pin_headers[$i], 10, 2);
 
-        translate([0, 95])
+        translate([0, 110])
             pin_socket(pin_headers[$i], 10, 2, right_angle = true);
 
     }

tests/ring_terminals.scad

@@ -24,7 +24,7 @@ include <../vitamins/ring_terminals.scad>
 
 module ring_terminals()
     layout([for(t = ring_terminals) ringterm_od(t)], 5)
-        rotate(90)
+        rotate(180)
             ring_terminal_assembly(ring_terminals[$i], 3);
 
 if($preview)

utils/maths.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! Maths utilities for minapulating vectors and matrices.
+//! Maths utilities for manipulating vectors and matrices.
 //
 function sqr(x) = x * x;
 

vitamins/blowers.scad

@@ -17,7 +17,7 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 
-RB5015 = ["RM5015", "Blower Runda RB5015",           51.3, 51, 15, 31.5, M4_cap_screw, 26, [27.3, 25.4], 4.5, [[4.3, 45.4], [47.3,7.4]], 20, 14, 1.5, 1.3, 1.2, 15];
+RB5015 = ["RB5015", "Blower Runda RB5015",           51.3, 51, 15, 31.5, M4_cap_screw, 26, [27.3, 25.4], 4.5, [[4.3, 45.4], [47.3,7.4]], 20, 14, 1.5, 1.3, 1.2, 15];
 PE4020 = ["PE4020", "Blower Pengda Technology 4020", 40,   40, 20, 27.5, M3_cap_screw, 22, [21.5, 20  ], 3.2, [[37,3],[3,37],[37,37]], 29.3, 17, 1.7, 1.2, 1.3, 13];
 
 blowers = [PE4020, RB5015];

vitamins/displays.scad

@@ -47,6 +47,19 @@ LCD1602A = ["LCD1602A", "LCD display 1602A", 71.3, 24.3, 7.0, LCD1602APCB,
           [],                                       // clearance need for the ts ribbon
         ];
 
+LCDS7282BPCB = ["", "", 85, 36, 1.65, 0, 2.56, 0, "green", false, [[-2.5, -2.5], [-2.5, 2.5], [2.5, 2.5], [2.5, -2.5]],
+      [ [3.5, 18, 0, "2p54header", 2, 7]
+      ],
+      []];
+
+LCDS7282B = ["LCDS7282B", "LCD display S-7282B", 73.6, 28.7, 9.6, LCDS7282BPCB,
+          [-2.5, 0, 0],                             // pcb offst
+          [[-64.5 / 2, -14.5 / 2], [64.5 / 2, 14.5 / 2, 0.6]],              // aperture
+          [],                                       // touch screen
+          0,                                        // thread length
+          [],                                       // clearance need for the ts ribbon
+        ];
+
 SSD1963_4p3PCB = ["", "", 120, 74, 1.65, 3, 3, 0, "mediumblue", false, [[3, 3], [-3, 3], [-3, -3], [3, -3]],
     [ [2.75 + 1.27, 37, 90, "2p54header", 20, 2]
     ],
@@ -60,6 +73,6 @@ SSD1963_4p3 = ["SSD1963_4p3", "LCD display SSD1963 4.3\"", 105.5, 67.2, 3.4, SSD
         [[0, -34.5], [12, -31.5]],
         ];
 
-displays = [HDMI5, SSD1963_4p3, LCD1602A];
+displays = [HDMI5, SSD1963_4p3, LCD1602A, LCDS7282B];
 
 use <display.scad>

vitamins/e3d.scad

@@ -61,30 +61,35 @@ heater_y = heater_width / 2;
 
 fan_x_offset = rad_dia / 2 + 4;
 
-module e3d_resistor(type) {
+module e3d_resistor(type, naked = false, resistor_wire_rotate = [0,0,0]) {
     translate([11 - heater_x, -3 - heater_y, heater_height / 2 + nozzle_h]) {
         color("grey")
             rotate([-90, 0, 0])
                 cylinder(r = resistor_dia / 2, h = resistor_len);
 
-        color("red")
-            translate([-3.5/2, resistor_len  + 3.5/2 + 1, 0]) {
-                cylinder(d = 3.5, h = 36);
+        if(!naked)
+            color("red")
+                translate([0, resistor_len + 3.5/2 + 1, 0]) {
+                rotate(resistor_wire_rotate) {
+                    translate([-3.5/2, 0, 0]) {
+                        cylinder(d = 3.5, h = 36);
 
-                translate([3.5, 0, 0])
-                    cylinder(r = 3.5 / 2, h = 36);
+                        translate([3.5, 0, 0])
+                            cylinder(r = 3.5 / 2, h = 36);
+                    }
+                }
             }
     }
 }
 
-module heater_block(type) {
+module heater_block(type, naked = false, resistor_wire_rotate = [0,0,0]) {
     translate_z(-hot_end_length(type))  {
         translate_z(nozzle_h)
             color("lightgrey")
                 translate([-heater_x, -heater_y, 0])
                     cube([heater_length, heater_width, heater_height]);
 
-        e3d_resistor(type);
+        e3d_resistor(type, naked, resistor_wire_rotate);
         e3d_nozzle(type);
     }
 }
@@ -118,7 +123,7 @@ module e3d_fan(type) {
                 fan(fan30x10);
 }
 
-module e3d_hot_end(type, filament, naked = false) {
+module e3d_hot_end(type, filament, naked = false, resistor_wire_rotate = [0,0,0]) {
     insulator_length = hot_end_insulator_length(type);
     inset = hot_end_inset(type);
     h_ailettes = rad_len / (2 * rad_nb_ailettes - 1);
@@ -146,17 +151,17 @@ module e3d_hot_end(type, filament, naked = false) {
             }
 
     rotate(90)
-        heater_block(type);
+        heater_block(type, naked, resistor_wire_rotate);
 
     if(!naked)
         translate_z(inset - insulator_length)
             e3d_fan();
 }
 
-module e3d_hot_end_assembly(type, filament, naked = false) {
+module e3d_hot_end_assembly(type, filament, naked = false, resistor_wire_rotate = [0,0,0]) {
     bundle = 3.2;
 
-    e3d_hot_end(type, filament, naked);
+    e3d_hot_end(type, filament, naked, resistor_wire_rotate);
 
     // Wire and ziptie
     if(!naked)

vitamins/extrusion.scad

@@ -0,0 +1,128 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+
+//
+//! Aluminium  extrusion.
+//
+include <../core.scad>
+
+function extrusion_width(type)          = type[1];   //! Width of extrusion
+function extrusion_height(type)         = type[2];   //! Height of extrusion
+function extrusion_center_hole(type)    = type[3];   //! Diameter of center hole
+function extrusion_corner_hole(type)    = type[4];   //! Diameter of corner hole
+function extrusion_center_square(type)  = type[5];   //! Size of center square
+function extrusion_channel_width(type)  = type[6];   //! Channel width
+function extrusion_channel_width_internal(type)  = type[7];   //! Internal channel width
+function extrusion_tab_thickness(type)  = type[8];   //! Tab thickness
+function extrusion_spar_thickness(type) = type[9];   //! Spar thickness
+function extrusion_fillet(type)         = type[10];  //! Radius of corner fillet
+
+module extrusion_cross_section(type, cornerHole) {
+
+    module extrusion_corner(type, cornerHole) {
+        width = extrusion_width(type);
+        tabThickness = extrusion_tab_thickness(type);
+        sparThickness = extrusion_spar_thickness(type);
+        centerSquare = extrusion_center_square(type);
+        channelWidth = extrusion_channel_width(type);
+        fillet = extrusion_fillet(type);
+        cornerSize = (width-channelWidth)/2;
+        cornerSquare = (width-extrusion_channel_width_internal(type))/2;
+        cornerHoleDiameter =extrusion_corner_hole(type);
+
+        translate([-width/2,-width/2]) {
+            difference() {
+                union() {
+                    translate([fillet,0])
+                        square([cornerSize-fillet,tabThickness]);
+                    translate([0,fillet])
+                        square([tabThickness,cornerSize-fillet]);
+                    translate([fillet,fillet])
+                        circle(fillet);
+                    translate([fillet,fillet])
+                        square([cornerSquare-fillet,cornerSquare-fillet]);
+                }
+                if(cornerHole)
+                    translate([cornerSquare/2,cornerSquare/2])
+                        circle(d=cornerHoleDiameter);
+            }
+        }
+        rotate(-135) translate([centerSquare/2,-sparThickness/2]) square([sqrt(2)*(width-centerSquare-cornerSquare)/2,sparThickness]);
+    }
+
+    module extrusion_center_section(type) {
+        width = extrusion_width(type);
+        tabThickness = extrusion_tab_thickness(type);
+        sparThickness = extrusion_spar_thickness(type);
+        centerSquare = extrusion_center_square(type);
+        channelWidth = extrusion_channel_width(type);
+
+        translate([0,width/2])
+            for(angle=[225,315])
+                rotate(angle)
+                    translate([centerSquare/2,-sparThickness/2])
+                        square([sqrt(2)*(width-centerSquare)/2,sparThickness]);
+        translate([0,-width/2])
+            for(angle=[45,135])
+                rotate(angle)
+                    translate([centerSquare/2,-sparThickness/2])
+                        square([sqrt(2)*(width-centerSquare)/2,sparThickness]);
+
+        centerHeight = width-channelWidth;
+        translate([-width/2,-centerHeight/2])
+            square([tabThickness,centerHeight]);
+        translate([width/2-tabThickness,-centerHeight/2])
+            square([tabThickness,centerHeight]);
+    }
+
+
+    centerSquare = extrusion_center_square(type);
+
+    width = extrusion_width(type);
+    height = extrusion_height(type);
+    count = (height-width)/width;
+
+    for(i=[0:count])
+        translate([0,i*width+(width-height)/2])
+            difference() {
+                square([centerSquare,centerSquare],center=true);
+                circle(d=extrusion_center_hole(type));
+            }
+    translate([0,(width-height)/2])
+        for(angle=[0,90])
+            rotate(angle)
+                extrusion_corner(type, cornerHole);
+    translate([0,-(width-height)/2])
+        for(angle=[180,270])
+            rotate(angle)
+                extrusion_corner(type, cornerHole);
+    if(count>=1)
+        for(i=[1:count])
+            translate([0,i*width-height/2])
+                extrusion_center_section(type);
+}
+
+module extrusion(type, length, cornerHole = false) { //! Draw the specified extrusion
+
+    vitamin(str("extrusion(", type[0], ", ", length, "): Extrusion ", type[0], " x ", length, "mm"));
+
+    color(grey90)
+        linear_extrude(height = length)
+            extrusion_cross_section(type, cornerHole);
+}
+

vitamins/extrusions.scad

@@ -0,0 +1,35 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+//
+// Extrusion
+//
+//                   W   H    d1   d2   s  cw   cwi    t  st  f
+E2020  = [ "E2020", 20, 20,  4.2,   0,  8,  6, 12.0,   2,  2, 1 ];
+E2040  = [ "E2040", 20, 40,  4.2,   0,  8,  6, 12.0,   2,  2, 1 ];
+E2060  = [ "E2060", 20, 60,  4.2,   0,  8,  6, 12.0,   2,  2, 1 ];
+E2080  = [ "E2080", 20, 80,  4.2,   0,  8,  6, 12.0,   2,  2, 1 ];
+E3030  = [ "E3030", 30, 30,  6.8, 4.2, 12,  8, 16.5,   2,  2, 1 ];
+E3060  = [ "E3060", 30, 60,  6.8, 4.2, 12,  8, 16.5,   2,  2, 1 ];
+E4040  = [ "E4040", 40, 40, 10.5, 6.0, 15, 10, 20.0, 5.5,  3, 1 ];
+E4080  = [ "E4080", 40, 80, 10.5, 6.0, 15, 10, 20.0, 5.5,  3, 1 ];
+
+extrusions = [E2020,E2040,E2060,E2080,E3030,E3060,E4040,E4080];
+
+use <extrusion.scad>
+

vitamins/fan.scad

@@ -147,11 +147,16 @@ module fan_holes(type, poly = false, screws = true, h = 100) { //! Make all the
     }
 }
 
-function nut_and_washer_thickness(screw, nyloc) = washer_thickness(screw_washer(screw)) + nut_thickness(screw_nut(screw), nyloc);
-function fan_screw_depth(type) = fan_boss_d(type) ? fan_depth(type) : fan_thickness(type);
-function fan_screw_length(type, thickness) = screw_longer_than(thickness + fan_screw_depth(type) + nut_and_washer_thickness(fan_screw(type), true)); //! Screw length required
+function fan_screw_depth(type, full_depth = false) = fan_boss_d(type) || full_depth ? fan_depth(type) : fan_thickness(type);
 
-module fan_assembly(type, thickness, include_fan = true, screw = false) { //! Fan with its fasteners
+function fan_screw_length(type, thickness, full_depth = false) =
+    let(depth = fan_screw_depth(type, full_depth),
+        washers = depth == fan_depth(type) ? 2 : 1,
+        washer = screw_washer(fan_screw(type)),
+        nut = screw_nut(fan_screw(type)))
+            screw_longer_than(thickness + depth + washer_thickness(washer) * washers + nut_thickness(nut, true)); //! Screw length required
+
+module fan_assembly(type, thickness, include_fan = true, screw = false, full_depth = false) { //! Fan with its fasteners
     translate_z(-fan_depth(type) / 2) {
         if(include_fan)
             fan(type);
@@ -160,11 +165,14 @@ module fan_assembly(type, thickness, include_fan = true, screw = false) { //! Fa
         nut = screw_nut(Screw);
         fan_hole_positions(type) {
             translate_z(thickness)
-                screw_and_washer(Screw, fan_screw_length(type, thickness));
+                screw_and_washer(Screw, fan_screw_length(type, thickness, full_depth));
 
-            translate_z(include_fan ? -fan_screw_depth(type) : 0)
+            translate_z(include_fan ? -fan_screw_depth(type, full_depth) : 0)
                 vflip()
-                    nut(nut, true);
+                    if(fan_screw_depth(type, full_depth) == fan_depth(type))
+                        nut_and_washer(nut, true);
+                    else
+                        nut(nut, true);
         }
      }
 }

vitamins/fans.scad

@@ -40,7 +40,8 @@ fan50x15 = [50, 15, 48, 20,    M4_dome_screw, 25,   12.5,100,7, 0,   undef];
 fan40x11 = [40, 11, 37, 16,    M3_dome_screw, 25,   7.5,100, 9, 0,   undef];
 fan30x10 = [30, 10, 27, 12,    M3_dome_screw, 17,   10, 100, 5, 0,   undef];
 fan25x10 = [25, 10, 24, 10,   M2p5_pan_screw, 16,   10, 100, 5, 0,   undef];
+fan17x8  = [17,  8, 16, 6.75,  M2_cap_screw,  12.6,  8, 100, 7, 0,   undef];
 
-fans = [fan25x10, fan30x10, fan40x11, fan50x15, fan60x15, fan60x25, fan70x15, fan80x25, fan80x38, fan120x25];
+fans = [fan17x8, fan25x10, fan30x10, fan40x11, fan50x15, fan60x15, fan60x25, fan70x15, fan80x25, fan80x38, fan120x25];
 
 use <fan.scad>

vitamins/hot_end.scad

@@ -44,10 +44,10 @@ function hot_end_length(type) = hot_end_total_length(type) - hot_end_inset(type)
 use <jhead.scad>
 use <e3d.scad>
 
-module hot_end(type, filament, naked = false) { //! Draw specified hot end
+module hot_end(type, filament, naked = false, resistor_wire_rotate = [0,0,0]) { //! Draw specified hot end
     if(hot_end_style(type) == jhead)
         jhead_hot_end_assembly(type, filament, naked);
 
     if(hot_end_style(type) == e3d)
-        e3d_hot_end_assembly(type, filament, naked);
+        e3d_hot_end_assembly(type, filament, naked, resistor_wire_rotate);
 }

vitamins/hygrometer.scad

@@ -0,0 +1,87 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Mini LCD Celsius Digital Thermometer Hygrometer Temperature Humidity Meter Gauge on eBay
+//
+include <../core.scad>
+use <../utils/round.scad>
+
+od = 40.9;
+h = 14;
+flange_d = 45.5;
+flange_t = 1.5;
+flange_d2 = 32;
+flange_t2 = 2;
+apperture_d = 24.7;
+hygrometer_hole_r = 21.3;
+slot_w = 5.5;
+
+module hygrometer_hole(h = 0) { //! Drill the hole for a hygrometer
+    round(cnc_bit_r) {
+        intersection() {
+            drill(hygrometer_hole_r, h);
+
+            rotate(30)
+                square([slot_w + 2 * cnc_bit_r, 100], center = true);
+        }
+        drill((od + 0.2) / 2, h);
+    }
+}
+
+function hygrometer_or() = flange_d / 2; //! The outside radius of a hygrometer
+
+module hygrometer() { //! Draw a hygrometer
+    vitamin("hygrometer(): Mini LCD Digital Thermometer / Hygrometer");
+
+    explode(40) {
+        color(grey30)
+            rotate_extrude()
+                polygon([
+                    [0, 0],
+                    [apperture_d / 2, 0],
+                    [apperture_d / 2, flange_t],
+                    [flange_d2 / 2,   flange_t2],
+                    [flange_d / 2,    flange_t],
+                    [flange_d / 2,    0],
+                    [od / 2,          0],
+                    [od / 2,          -h],
+                    [0,               -h]
+                ]);
+
+        color("#94A7AB")
+            cylinder(d = apperture_d, h = eps);
+
+        color("black")
+            linear_extrude(height = 0.2, center = true) {
+                translate([0, 3])
+                    text("20_4", font = "7 segment", valign = "bottom", halign = "center", size = apperture_d / 6);
+
+                translate([7, 3])
+                    text("C", font = "7 segment", valign = "bottom", halign = "center", size = apperture_d / 8);
+
+                translate([-1.9, 0.5])
+                    text("50", font = "7 segment", valign = "top", halign = "center", size = apperture_d / 2.7);
+
+                translate([0, -apperture_d / 6])
+                    text("          %", font = "Arial", valign = "center", halign = "center", size = apperture_d / 6);
+            }
+
+    }
+}

vitamins/pcb.scad

@@ -49,9 +49,12 @@ function pcb_grid(type)         = type[13]; //! Grid if a perfboard
 function pcb_polygon(type)      = type[14]; //! Optional outline polygon for odd shaped boards
 function pcb_screw(type, cap = hs_cap) = Len(type[15]) ? type[15] : find_screw(cap, screw_smaller_than(pcb_hole_d(type))); //! Mounting screw type
 
-module pcb_grid(type, x, y, z = 0)  //! Positions children at specified grid positions
-    translate([-pcb_length(type) / 2 + pcb_grid(type).x + 2.54 * x,
-               -pcb_width(type)  / 2 + pcb_grid(type).y + 2.54 * y, pcb_thickness(type) + z])
+function pcb_grid_pos(type, x, y, z = 0) = //! Returns a pcb grid position
+    [-pcb_length(type) / 2 + pcb_grid(type).x + 2.54 * x,
+     -pcb_width(type)  / 2 + pcb_grid(type).y + 2.54 * y, pcb_thickness(type) + z];
+
+module pcb_grid(type, x, y, z = 0)  //! Positions children at specified grid position
+    translate(pcb_grid_pos(type, x, y, z))
         children();
 
 // allows negative ordinates to represent offsets from the far edge
@@ -197,14 +200,27 @@ module jack(cutout = false) { //! Draw 3.5mm jack
                 }
 }
 
-module hdmi(cutout = false) { //! Draw HDMI socket
-    l = 12;
-    iw1 = 14;
-    iw2 = 10;
-    ih1 = 3;
-    ih2 = 4.5;
-    h = 6.5;
-    t = 0.5;
+function hdmi_depth(type)     = type[2]; //! Front to back depth
+function hdmi_width1(type)    = type[3]; //! Inside width at the top
+function hdmi_width2(type)    = type[4]; //! Inside width at the bottom
+function hdmi_height1(type)   = type[5]; //! Inside height at the sides
+function hdmi_height2(type)   = type[6]; //! Inside height in the middle
+function hdmi_height(type)    = type[7]; //! Outside height above the PCB
+function hdmi_thickness(type) = type[8]; //! Wall thickness of the metal
+
+hdmi_full = [ "hdmi_full", "HDMI socket",      12,  14,   10,  3,    4.5, 6.5, 0.5 ];
+hdmi_mini = [ "hdmi_mini", "Mini HDMI socket", 7.5, 10.5, 8.3, 1.28, 2.5, 3.2, 0.35 ];
+
+module hdmi(type, cutout = false) { //! Draw HDMI socket
+    vitamin(str("hdmi(", type[0], "): ", type[1]));
+
+    l = hdmi_depth(type);
+    iw1 = hdmi_width1(type);
+    iw2 = hdmi_width2(type);
+    ih1 = hdmi_height1(type);
+    ih2 = hdmi_height2(type);
+    h = hdmi_height(type);
+    t = hdmi_thickness(type);
 
     module D() {
         hull() {
@@ -503,6 +519,53 @@ module flex(cutout = false) { //! Draw flexistrip connector
     }
 }
 
+module flat_flex(cutout = false) { //! Draw flat flexistrip connector as used on RPI0
+    l1 = 17;
+    w1 = 1.4;
+    h1 = 1.2;
+
+    l2 = 15.4;
+    w2 = 1.6;
+    h2 = 1.0;
+
+    l3 = 16;
+    w3 = 1.1;
+    h3 = 1.2;
+
+    l4 = 12;
+
+    slot_l = 11.8;
+    slot_h = 0.9;
+
+    w = w1 + w2 + w3;
+    if(cutout)
+        ;
+    else {
+        color(grey30) {
+            translate([w / 2 - w1, 0, h1 / 2])
+                rotate([90, 0, 90])
+                    linear_extrude(height = w1)
+                        difference() {
+                            square([l1, h1], center = true);
+
+                            translate([0, -h1 / 2])
+                                square([slot_l, slot_h * 2], center = true);
+                        }
+
+        }
+        color(grey90) {
+            translate([-w / 2 + w3 / 2, 0, h3 / 2])
+                cube([w3, l3, h3], center = true);
+
+            translate([-w / 2 + w3 + w2 / 2, 0, h2 / 2])
+                cube([w2, l2, h2], center = true);
+
+             translate([-w / 2 + w3 + w2 / 2, 0, h3 / 2])
+                cube([w2, l4, h3], center = true);
+       }
+    }
+}
+
 module terminal_35(ways) { //! Draw 3.5mm terminal block
     vitamin(str("terminal_35(", ways, "): Terminal block ", ways, " way 3.5mm"));
     pitch = 3.5;
@@ -637,19 +700,22 @@ module standoff(h, d, h2, d2) {
 
 module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb component from description
     function show(comp, part) = (comp[3] == part || comp[3] == str("-",part)) && (!cutouts || angle == undef || angle == comp.z);
+    function param(n, default = 0) = len(comp) > n ? comp[n] : default;
     rotate(comp.z) {
-        if(show(comp, "2p54header")) pin_header(2p54header, comp[4], comp[5], len(comp) > 5 ? comp[6] : false, cutouts);
-        if(show(comp, "2p54boxhdr")) box_header(2p54header, comp[4], comp[5], len(comp) > 5 ? comp[6] : false, cutouts);
-        if(show(comp, "2p54socket")) pin_socket(2p54header, comp[4], comp[5], comp[6], len(comp) > 7 ? comp[7] : 0, cutouts);
-        if(show(comp, "chip")) chip(comp[4], comp[5], comp[6], len(comp) > 7 ? comp[7] : grey30, cutouts);
+        if(show(comp, "2p54header")) pin_header(2p54header, comp[4], comp[5], param(6), cutouts);
+        if(show(comp, "2p54boxhdr")) box_header(2p54header, comp[4], comp[5], param(6), cutouts);
+        if(show(comp, "2p54socket")) pin_socket(2p54header, comp[4], comp[5], param(6, false), param(7), param(8, false), cutouts);
+        if(show(comp, "chip")) chip(comp[4], comp[5], comp[6], param(7, grey30), cutouts);
         if(show(comp, "rj45")) rj45(cutouts);
         if(show(comp, "usb_Ax2")) usb_Ax2(cutouts);
         if(show(comp, "usb_uA")) usb_uA(cutouts);
         if(show(comp, "usb_B")) usb_B(cutouts);
         if(show(comp, "jack")) jack(cutouts);
         if(show(comp, "barrel_jack")) barrel_jack(cutouts);
-        if(show(comp, "hdmi")) hdmi(cutouts);
+        if(show(comp, "hdmi")) hdmi(hdmi_full, cutouts);
+        if(show(comp, "mini_hdmi")) hdmi(hdmi_mini, cutouts);
         if(show(comp, "flex")) flex(cutouts);
+        if(show(comp, "flat_flex")) flat_flex(cutouts);
         if(show(comp, "D_plug")) if(!cutouts) translate_z(d_pcb_offset(comp[4])) d_plug(comp[4], pcb = true);
         if(show(comp, "molex_hdr")) if(!cutouts) molex_254(comp[4]);
         if(show(comp, "term254")) if(!cutouts) green_terminal(gt_2p54,comp[4], comp[5]);
@@ -667,6 +733,9 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
     }
 }
 
+function pcb_component_position(type, name, index = 0) = //! Return x y position of specified component
+    [for(comp = pcb_components(type), p = [pcb_coord(type, [comp.x, comp.y])]) if(comp[3] == name) [p.x, p.y]][index];
+
 module pcb_component_position(type, name) { //! Position child at the specified component position
     for(comp = pcb_components(type)) {
         p = pcb_coord(type, [comp.x, comp.y]);
@@ -700,11 +769,12 @@ module pcb_components(type, cutouts = false, angle = undef) { //! Draw list of P
 module pcb_cutouts(type, angle = undef) pcb_components(type, true, angle); //! Make cut outs to clear components on a PCB
 
 module pcb_grid_positions(type) {
-    x0 = pcb_grid(type).x;
-    y0 = pcb_grid(type).y;
+    grid =  pcb_grid(type);
+    x0 = grid.x;
+    y0 = grid.y;
 
-    cols = round((pcb_length(type) - 2 * x0) / inch(0.1));
-    rows = round((pcb_width(type) - 2 * y0) / inch(0.1));
+    cols = is_undef(grid[2]) ? round((pcb_length(type) - 2 * x0) / inch(0.1)) : grid[2] - 1;
+    rows = is_undef(grid[3]) ? round((pcb_width(type) - 2 * y0) / inch(0.1))  : grid[3] - 1;
     for(x = [0 : cols], y = [0 : rows])
         pcb_grid(type, x, y)
             children();
@@ -740,9 +810,9 @@ module pcb(type) { //! Draw specified PCB
             pcb_screw_positions(type)
                 tube(or =  max(pcb_land_d(type), 1) / 2, ir = pcb_hole_d(type) / 2, h = t + 2 * eps);
 
-    fr4 = pcb_colour(type) == "green";
+    fr4 = pcb_colour(type) != "sienna";
     plating = 0.15;
-    color(fr4 ? "silver" : "gold")
+    color(pcb_colour(type) == "green" ? "silver" : "gold")
         translate_z(-plating)
             linear_extrude(height = fr4 ? t + 2 * plating : plating)
                 if(Len(grid)) {
@@ -752,7 +822,7 @@ module pcb(type) { //! Draw specified PCB
 
                             circle(d = 1);
                         }
-                    if(fr4) { // oval lands at the ends
+                    if(fr4 && len(grid) < 3) { // oval lands at the ends
                         screw_x = pcb_coord(type, pcb_holes(type)[0]).x;
                         y0 = pcb_grid(type).y;
                         rows = round((pcb_width(type) - 2 * y0) / inch(0.1));

vitamins/pcbs.scad

@@ -209,7 +209,29 @@ RPI3 =  ["RPI3", "Raspberry Pi 3",     85,    56,    1.4, 3,    2.75, 6, "green"
      [45,    11.5,-90, "flex"],
      [7.75,  28,  180, "-uSD", [12, 11.5, 1.28]],
     ],
-    [": Micro SD card"]];
+    [": Micro SD card"],
+    [32.5 - 9.5 * 2.54, 52.5 - 1.27, 20, 2]];
+
+RPI0 =  ["RPI0", "Raspberry Pi Zero",     65,    30,    1.4, 3,    2.75, 6, "green", false, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]],
+    [//[32.5, -3.5,   0, "2p54header", 20, 2],
+     [25.5,  13,      0, "chip",       12, 12, 1.2],
+     [12.4,  3.4,   -90, "mini_hdmi"],
+     [54,    2,     -90, "usb_uA"],
+     [41.4,  2,     -90, "usb_uA"],
+     [7.25,  16.7,  180, "uSD", [12, 11.5, 1.4]],
+     [-1.3,    15,    0, "flat_flex"],
+    ],
+    [": Micro SD card"],
+    [32.5 - 9.5 * 2.54, 26.5 - 1.27, 20, 2]];
+
+EnviroPlus =  ["EnviroPlus", "Enviro+",     65,    30.6,    1.6, 3,    2.75, 6, "white", false, [[3.5, 3.8], [-3.5, 3.8], [-3.5, -3.8], [3.5, -3.8]],
+    [[32.5, -3.8,   0, "-2p54socket", 20, 2, false, 5, true],
+     [-15.5, 2.5,   0, "-chip", 15, 5, 3, "white"],
+     [-14.25,16.25, 0, "chip", 27.5, 13.5, 1.5]
+    ],
+    [],
+    [8, 1.5, 9, 1]];
+
 
 ArduinoUno3 = ["ArduinoUno3", "Arduino Uno R3", 68.58, 53.34, 1.6, 0, 3.3, 0, "#2140BE", false, [[15.24, 50.8],[66.04, 35.56],[66.04, 7.62],[13.97, 2.54]],
     [[30.226, -2.54, 0, "2p54socket", 10, 1],
@@ -317,6 +339,6 @@ PERF74x51 = ["PERF74x51", "Perfboard 74 x 51mm", 74, 51, 1.0, 0, 3.0, 0, "sienna
 
 PSU12V1A = ["PSU12V1A", "PSU 12V 1A", 67, 31, 1.7, 0, 3.9, 0, "green", true, [[3.5, 3.5], [-3.5, 3.5], [-3.5, -3.5], [3.5, -3.5]], [], []];
 
-pcbs = [ExtruderPCB, PI_IO, RPI3, ArduinoUno3, ArduinoLeonardo, Keyes5p1, PERF80x20, PERF70x50, PERF70x30, PERF60x40, PERF74x51, PSU12V1A, DuetE, Duex2, Duex5, Melzi, ZC_A0591];
+pcbs = [ExtruderPCB, PI_IO, RPI0, EnviroPlus, RPI3, ArduinoUno3, ArduinoLeonardo, Keyes5p1, PERF80x20, PERF70x50, PERF70x30, PERF60x40, PERF74x51, PSU12V1A, DuetE, Duex2, Duex5, Melzi, ZC_A0591];
 
 use <pcb.scad>

vitamins/pillars.scad

@@ -31,7 +31,7 @@
 //
 M2x16_brass_pillar     = ["M2x16_brass_pillar",     "nurled",    2, 16, 3.17,      3.17,       0, 0, brass,     brass,    3,-3];
 M3x13_hex_pillar       = ["M3x13_hex_pillar",       "hex",       3, 13, 5/cos(30), 5/cos(30),  6, 6, "silver", "silver", -6, 6];
-M3x20_hex_pillar       = ["M3x20_hex_pillar",       "hex",       3, 20, 5/cos(30), 5/cos(30),  6, 6, "silver", "silver", -6, 6];
+M3x20_hex_pillar       = ["M3x20_hex_pillar",       "hex",       3, 20, 5/cos(30), 5/cos(30),  6, 6, "silver", "silver", -8, 8];
 M3x20_nylon_pillar     = ["M3x20_nylon_pillar",     "nylon",     3, 20, 8,         5/cos(30),  0, 6, "white",   brass,   -6, 6];
 M4x17_nylon_pillar     = ["M4x17_nylon_pillar",     "nylon",     4, 20, 8,         5/cos(30),  0, 6, "white",   brass,   -6, 6];
 M3x20_nylon_hex_pillar = ["M3x20_nylon_hex_pillar", "hex nylon", 3, 20, 8/cos(30), 8/cos(30),  6, 6,  grey20,   grey20,  -6, 6];

vitamins/pin_header.scad

@@ -43,30 +43,52 @@ module pin(type, length = undef) { //! Draw a header pin
             }
 }
 
-module pin_header(type, cols = 1, rows = 1, smt = false, cutout = false) { //! Draw pin header
+module pin_header(type, cols = 1, rows = 1, smt = false, right_angle = false, cutout = false) { //! Draw pin header
     pitch =  hdr_pitch(type);
     h = pitch;
+    ra_offset = 2.4;
+    width = pitch * rows;
 
     if(cutout)
         dogbone_rectangle([cols * pitch + 2 * panel_clearance, rows * pitch + 2 * panel_clearance, 100], center = false);
     else
-        vitamin(str("pin_header(", type[0], cols, rows, arg(smt, false, "smt"), "): Pin header ", cols, " x ", rows));
+        vitamin(str("pin_header(", type[0], ", ", cols, ", ", rows,
+                    arg(smt, false, "smt"), arg(right_angle, false, "right_angle"), "): Pin header ", cols, " x ", rows, right_angle ? " right_angle" : ""));
 
         translate_z(smt ? 3.5 - h : 0) {
-            for(x = [0 : cols - 1], y = [0 : rows - 1])
+            for(x = [0 : cols - 1], y = [0 : rows - 1]) {
                 translate([pitch * (x - (cols - 1) / 2), pitch * (y - (rows - 1) / 2), 0])
-                    pin(type);
+                    if(right_angle)
+                        pin(type, hdr_pin_below(type) + width / 2 + (y - 0.5) * pitch);
+                    else
+                        pin(type);
 
-            color(hdr_base_colour(type))
-                linear_extrude(height = h)
-                    for(x = [0 : cols - 1], y = [0 : rows - 1])
-                        translate([pitch * (x - (cols - 1) / 2), pitch * (y - (rows - 1) / 2), pitch / 2])
-                            hull() {
-                                chamfer = pitch / 4;
-                                square([pitch + eps, pitch - chamfer], center = true);
+                if(right_angle) {
+                    w = hdr_pin_width(type);
+                    rotate([-90, 0, 180])
+                        translate([pitch * (x - (cols - 1) / 2), -pitch * (y - (rows - 1) / 2) -width / 2, hdr_pin_below(type) - (y - 0.5) * pitch])
+                            pin(type, hdr_pin_length(type) - hdr_pin_below(type) + ra_offset + pitch / 2 + (y - 0.5) * pitch);
 
-                                square([pitch - chamfer, pitch + eps], center = true);
-                            }
+                    translate([pitch * (x - (cols - 1) / 2), pitch * (y - (rows - 1) / 2) - w / 2, pitch * (y - (rows - 1) / 2) + width / 2 - w / 2])
+                        rotate([0, -90, 0])
+                            color(hdr_pin_colour(type))
+                                rotate_extrude(angle = 90, $fn = 32)
+                                    translate([0, -w / 2])
+                                        square(w);
+                }
+            }
+            translate([0, right_angle ? -ra_offset - pitch / 2 : 0, right_angle ? width / 2 : 0])
+                rotate([right_angle ? 90 : 0, 0, 0])
+                    color(hdr_base_colour(type))
+                        linear_extrude(height = h)
+                            for(x = [0 : cols - 1], y = [0 : rows - 1])
+                                translate([pitch * (x - (cols - 1) / 2), pitch * (y - (rows - 1) / 2), pitch / 2])
+                                    hull() {
+                                        chamfer = pitch / 4;
+                                        square([pitch + eps, pitch - chamfer], center = true);
+
+                                        square([pitch - chamfer, pitch + eps], center = true);
+                                    }
         }
 }
 
@@ -80,12 +102,12 @@ module box_header(type, cols = 1, rows = 1, smt = false, cutout = false) { //! D
     if(cutout)
         dogbone_rectangle([cols * pitch + 2 * panel_clearance, rows * pitch + 2 * panel_clearance, 100], center = false);
     else
-        vitamin(str("box_header(", type[0], cols, rows, arg(smt, false, "smt"), "): Box header ", cols, " x ", rows));
+        vitamin(str("box_header(", type[0], ", ", cols, ", ", rows, arg(smt, false, "smt"), "): Box header ", cols, " x ", rows));
 
         translate_z(smt ? 3.5 - h : 0) {
             for(x = [0 : cols - 1], y = [0 : rows - 1])
                 translate([pitch * (x - (cols - 1) / 2), pitch * (y - (rows - 1) / 2), 0])
-                    pin(type);
+                    pin(type, hdr_pin_length(type) - pitch + base);
 
             color(hdr_base_colour(type)) {
                 linear_extrude(height = base)
@@ -138,16 +160,16 @@ module idc_transition(type, cols = 5, skip = [], cutout = false) { //! Draw IDC
     }
 }
 
-module pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, cutout = false) { //! Draw pin socket
+module pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt = false, cutout = false) { //! Draw pin socket
     pitch = hdr_pitch(type);
     length = pitch * cols + 0.5;
     width = pitch * rows - 0.08;
-    depth = max(hdr_socket_depth(type), height);
+    depth = height ? height : hdr_socket_depth(type);
     ra_offset = 1.5;
     if(cutout)
         ;
     else {
-        vitamin(str("pin_socket(", type[0], ", ", cols, ", ", rows, arg(right_angle, false, "right_angle"), arg(height, 0, "height"),
+        vitamin(str("pin_socket(", type[0], ", ", cols, ", ", rows, arg(right_angle, false, "right_angle"), arg(height, 0, "height"), arg(smt, false, "smt"),
                                "): Pin socket ", cols, " x ", rows, right_angle ? " right_angle" : ""));
         color(hdr_base_colour(type))
             translate([0, right_angle ? -ra_offset - pitch / 2 : 0, right_angle ? width / 2 : 0])
@@ -164,8 +186,9 @@ module pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, cut
 
         color(hdr_pin_colour(type))
             for(x = [0 : cols - 1], y = [0 : rows -1]) {
-                translate([pitch * (x - (cols - 1) / 2), pitch * (y - (rows - 1) / 2), 0])
-                    pin(type, hdr_pin_below(type) + width / 2 + (y - 0.5) * pitch);
+                if(!smt)
+                    translate([pitch * (x - (cols - 1) / 2), pitch * (y - (rows - 1) / 2), 0])
+                        pin(type, hdr_pin_below(type) + width / 2 + (y - 0.5) * pitch);
 
                 if(right_angle) {
                     rotate([-90, 0, 0])

vitamins/pin_headers.scad

@@ -17,14 +17,14 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 
-//                          p     p   b    p     p       b
-//                          i     i   e    i     i       a
-//                          t     n   l    n     n       s
-//                          c         o                  e
-//                          h     l   w    w     c
-//                                                       c
+//                          p     p     b    p     p       b      Socket depth
+//                          i     i     e    i     i       a
+//                          t     n     l    n     n       s
+//                          c           o                  e
+//                          h     l     w    w     c
+//                                                         c
 //
-2p54header = ["2p54header", 2.54, 12, 3.2, 0.66, "gold", grey20, 8.5];
+2p54header = ["2p54header", 2.54, 11.6, 3.2, 0.66, "gold", grey20, 8.5];
 
 pin_headers = [ 2p54header ];
 

vitamins/ring_terminal.scad

@@ -26,48 +26,96 @@ use <nut.scad>
 use <washer.scad>
 use <../utils/tube.scad>
 
-function ringterm_od(type)        = type[1];    //! Outside diameter
-function ringterm_id(type)        = type[2];    //! Inside diameter
-function ringterm_length(type)    = type[3];    //! Length of the tail including the ring
-function ringterm_width(type)     = type[4];    //! Width of the tail
-function ringterm_hole(type)      = type[5];    //! Wire hole diameter
-function ringterm_thickness(type) = type[6];    //! Metal thickness
-function ringterm_screw(type)     = type[7];    //! Screw type
+function ringterm_od(type)           = type[1];    //! Outside diameter
+function ringterm_id(type)           = type[2];    //! Inside diameter
+function ringterm_length(type)       = type[3];    //! Length of the tail including the ring
+function ringterm_width(type)        = type[4];    //! Width of the tail
+function ringterm_hole(type)         = type[5];    //! Wire hole diameter
+function ringterm_thickness(type)    = type[6];    //! Metal thickness
+function ringterm_screw(type)        = type[7];    //! Screw type
+function ringterm_crimp_length(type) = type[8];    //! If non-zero the length of the crimp tube
 function ringterm_extent(type)    = ringterm_length(type) / sqrt(2); //! Space to leave
 
 module ring_terminal(type) { //! Draw specifeid ring terminal
     screw = ringterm_screw(type);
     d = 2 * screw_radius(screw);
-    vitamin(str("ring_terminal(", type[0], "): Ring terminal ",d,"mm"));
+    crimp = ringterm_crimp_length(type);
+    vitamin(str("ring_terminal(", type[0], "): Ring terminal ", crimp ? "crimp " : "", d, "mm"));
 
     t = ringterm_thickness(type);
     w = ringterm_width(type);
     od = ringterm_od(type);
     id = ringterm_id(type);
     l = ringterm_length(type);
-    angle = 45;
-    bend = washer_radius(screw_washer(screw)) + t * tan(angle / 2);
+    angle = crimp ? 0 : 45;
+    transition = 1;
+    bend = crimp ? l - od / 2 - crimp - transition : washer_radius(screw_washer(screw)) + t * tan(angle / 2);
+    hole_d = ringterm_hole(type);
+
+    module hull_if_crimp()
+        if(crimp)
+            hull()
+                children();
+        else
+            children();
+
     color("silver") union() {
-        tube(or = od / 2, ir = id / 2, h = t, center = false);
+        linear_extrude(height = t)
+            difference() {
+                hull_if_crimp() {
+                    circle(d = od);
 
-        translate([-w / 2, -bend, 0])
-            cube([w, bend - id / 2, t]);
+                    translate([-w / 2, -bend, 0])
+                        square([w, bend - id / 2]);
+                }
+                circle(d = id);
+            }
 
-        translate([0, -bend])
-            rotate([-angle, 0, 0])
-                linear_extrude(height = t)
-                    difference() {
-                        length = l - od / 2 - bend;
-                        hull() {
-                            translate([-w / 2, -eps])
-                                square([w, eps]);
+        if(crimp) {
+            translate([0, -bend, w / 2])
+                rotate([90, 0, 0]) {
+                    render() difference() {
+                        union() {
+                            translate_z(transition)
+                                cylinder(d = w, h = crimp);
 
-                            translate([0, -length + w / 2])
-                                circle(d = w);
+                            hull() {
+                                translate_z(transition)
+                                    cylinder(d = w, h = eps);
+
+                                translate([-w / 2, -w / 2])
+                                    cube([w, t, eps]);
+                            }
                         }
-                        translate([0, -length + w / 2])
-                            circle(d = ringterm_hole(type));
+                        hull() {
+                            translate_z(-eps)
+                                cylinder(d = w - 2 * t, h = crimp + transition + 2 * eps);
+
+                            translate([-w / 2 + t,  -w / 2 + t])
+                                cube([w - 2 * t, w / 2 - t, eps]);
+                         }
+                         translate([0, w / 2])
+                            cube([0.1, w, 100], center = true);
                     }
+                }
+            }
+        else
+            translate([0, -bend])
+                rotate([-angle, 0, 0])
+                    linear_extrude(height = t)
+                        difference() {
+                            length = l - od / 2 - bend;
+                            hull() {
+                                translate([-w / 2, -eps])
+                                    square([w, eps]);
+
+                                translate([0, -length + w / 2])
+                                    circle(d = w);
+                            }
+                            if(hole_d)
+                                translate([0, -length + w / 2])
+                                    circle(d = hole_d);
+                        }
     }
     translate_z(ringterm_thickness(type))
         children();

vitamins/ring_terminals.scad

@@ -20,16 +20,17 @@
 //
 // Ring terminals
 //
-//                                  o  i   l  w    h    t  s
-//                                  d  d   e  i    o    h  c
-//                                         n  d    l    i  r
-//                                         g  t    e    c  e
-//                                         t  h         k  w
-//                                         h
+//                                        o    i     l  w      h    t  s              c
+//                                        d    d     e  i      o    h  c              r
+//                                                   n  d      l    i  r              i
+//                                                   g  t      e    c  e              m
+//                                                   t  h           k  w              p
+//                                                   h
 //
-M3_ringterm    = ["M3_ringterm",    6, 3, 12, 3, 1.5, 0.2, M3_dome_screw];
-M3_ringterm_cs = ["M3_ringterm_cs", 6, 3, 12, 3, 1.5, 0.2, M3_cap_screw];
+M3_ringterm       = ["M3_ringterm",       6,   3,   12, 3,   1.5, 0.2, M3_dome_screw, 0];
+M3_ringterm_cs    = ["M3_ringterm_cs",    6,   3,   12, 3,   1.5, 0.2, M3_cap_screw,  0];
+M3_ringterm_crimp = ["M3_ringterm_crimp", 5.5, 3,   13, 4.1, 0,   0.7, M3_dome_screw, 4.5];
 
-ring_terminals = [M3_ringterm, M3_ringterm_cs];
+ring_terminals = [M3_ringterm, M3_ringterm_cs, M3_ringterm_crimp];
 
 use <ring_terminal.scad>

vitamins/rocker.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! Rocket switch. Also used for neon indicator in the same form factor.
+//! Rocker switch. Also used for neon indicator in the same form factor.
 //
 include <../core.scad>
 use <spade.scad>

vitamins/screws.scad

@@ -110,7 +110,7 @@ screw_lists = [
 [ M2_cap_screw, M2p5_cap_screw, M3_cap_screw, M4_cap_screw, M5_cap_screw, M6_cap_screw, M8_cap_screw],
 [ 0,            0,              M3_low_cap_screw],
 [ 0,            0,              M3_hex_screw, M4_hex_screw, M5_hex_screw, M6_hex_screw, M8_hex_screw],
-[ 0,            M2p5_pan_screw, M3_pan_screw, M4_pan_screw, No632_pan_screw, M5_pan_screw, M6_pan_screw],
+[ 0,            M2p5_pan_screw, M3_pan_screw, M4_pan_screw, M5_pan_screw, M6_pan_screw, No632_pan_screw],
 [ 0,            No2_screw,      No4_screw,    No6_screw,    No6_cs_screw],
 [ 0,            M2_cs_cap_screw,M3_cs_cap_screw, M4_cs_cap_screw],
 [ 0,            0,              M3_dome_screw, M4_dome_screw],

vitamins/spools.scad

@@ -27,7 +27,8 @@
 spool_300x88 = ["spool_300x88", 300, 88, 43, 6, 8, 52, 214, 300];
 spool_300x85 = ["spool_300x85", 300, 85, 60, 4, 8, 52, 250, 280];
 spool_200x55 = ["spool_200x55", 200, 55, 40, 5, 5, 52, 200, 200];
+spool_200x60 = ["spool_200x60", 200, 60, 60, 5, 2, 52, 78,  191]; // 3D Filaprint
 
-spools = [spool_200x55, spool_300x85, spool_300x88];
+spools = [spool_200x55, spool_200x60, spool_300x85, spool_300x88];
 
 use <spool.scad>