Added male screw threads.

Reordered screws.
Random pixel changes.

core.scad

@@ -25,3 +25,15 @@ include <global_defs.scad>
 // Global functions and modules
 //
 use <utils/core/global.scad>
+
+module use_stl(name) {               //! Import an STL to make a build platter
+    stl(name);
+
+    import(str("../stls/", name, ".stl"));
+}
+
+module use_dxf(name) {               //! Import a DXF to make a build panel
+    dxf(name);
+
+    import(str("../dxfs/", name, ".dxf"));
+}

examples/MainsBreakOutBox/readme.md

@@ -31,6 +31,7 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 ## Parts list
 | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Base</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Feet</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Mains&nbsp;In</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Main</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">TOTALS</span> |  |
 |--:|--:|--:|--:|--:|:--|
+|  |  |  |  | | **Vitamins** |
 | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;2&nbsp; |  &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp; 4mm shielded jack socket blue |
 | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; 4mm shielded jack socket brown |
 | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;2&nbsp; |  &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp; 4mm shielded jack socket green |
@@ -47,9 +48,11 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;1&nbsp; |  &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp; Wire blue 30/0.25mm strands, length 150mm - not shown |
 | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp; Wire brown 30/0.25mm strands, length 150mm - not shown |
 | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;1&nbsp; |  &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp; Wire green & yellow 30/0.25mm strands, length 150mm - not shown |
-|  |  |  |  | | **3D Printed parts** |
-| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;&nbsp;foot.stl |
-| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;&nbsp;socket_box.stl |
+| &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;16&nbsp; | &nbsp;&nbsp;14&nbsp; | &nbsp;&nbsp;18&nbsp; | &nbsp;&nbsp;50&nbsp; | &nbsp;&nbsp;Total vitamins count |
+|  |  |  |  | | **3D printed parts** |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;foot.stl |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;socket_box.stl |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;5&nbsp; | &nbsp;&nbsp;Total 3D printed parts count |
 
 [Top](#TOP)
 
@@ -86,9 +89,9 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 ### Vitamins
 |Qty|Description|
 |--:|:----------|
-|8| Washer  M3 x 7mm x 0.5mm|
-|4| Screw M3 dome x 10mm|
 |4| Nut M3 x 2.4mm nyloc|
+|4| Screw M3 dome x 10mm|
+|8| Washer  M3 x 7mm x 0.5mm|
 
 
 ### 3D Printed parts
@@ -122,14 +125,14 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 ### Vitamins
 |Qty|Description|
 |--:|:----------|
-|1| Wire green & yellow 30/0.25mm strands, length 150mm - not shown|
-|1| Wire blue 30/0.25mm strands, length 150mm - not shown|
-|2| Wire brown 30/0.25mm strands, length 150mm - not shown|
 |3| Heatshrink sleeving ID 3.2mm x 15mm - not shown|
 |1| IEC inlet for ATX|
+|2| Nut M3 x 2.4mm nyloc|
 |2| Screw M3 cs cap x 12mm|
 |2| Washer  M3 x 7mm x 0.5mm|
-|2| Nut M3 x 2.4mm nyloc|
+|1| Wire blue 30/0.25mm strands, length 150mm - not shown|
+|2| Wire brown 30/0.25mm strands, length 150mm - not shown|
+|1| Wire green & yellow 30/0.25mm strands, length 150mm - not shown|
 
 
 ### Sub-assemblies
@@ -161,15 +164,15 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 ### Vitamins
 |Qty|Description|
 |--:|:----------|
-|1| Wire green & yellow 30/0.25mm strands, length 150mm - not shown|
-|1| Wire blue 30/0.25mm strands, length 150mm - not shown|
-|5| Heatshrink sleeving ID 3.2mm x 15mm - not shown|
-|3| Ferrule for 1.5mm^2 wire - not shown|
-|1| Mains socket 13A|
-|2| Screw M3 cs cap x 20mm|
 |2| 4mm shielded jack socket blue|
 |1| 4mm shielded jack socket brown|
 |2| 4mm shielded jack socket green|
+|3| Ferrule for 1.5mm^2 wire - not shown|
+|5| Heatshrink sleeving ID 3.2mm x 15mm - not shown|
+|1| Mains socket 13A|
+|2| Screw M3 cs cap x 20mm|
+|1| Wire blue 30/0.25mm strands, length 150mm - not shown|
+|1| Wire green & yellow 30/0.25mm strands, length 150mm - not shown|
 
 
 ### Sub-assemblies

gallery/readme.md

@@ -6,6 +6,13 @@ Arduino thermostat to control a beer fridge to use it as an environmental chambe
 ![](ArduinoThermostat.png)
 
 
+<a name="TOP"></a>
+## FilamentDryBox
+A small fan oven with a spool holder to keep the filament warm and dry.
+
+![](FilamentDryBox.png)
+
+
 <a name="TOP"></a>
 ## HydraBot
 Current state of HydraRaptor after being modified for laser engraving.
@@ -68,6 +75,13 @@ Mains isolated and variable supply with metering.
 ![](Mains_Box.png)
 
 
+<a name="TOP"></a>
+## SunBot
+A solar tracker to keep solar powerbanks pointing at the sun.
+
+![](SunBot.png)
+
+
 <a name="TOP"></a>
 ## Turntable
 WiFi enabled remote control turntable for photography

global_defs.scad

@@ -39,6 +39,7 @@ pp2_colour      = is_undef($pp2_colour)      ? "red"  : $pp2_colour;      // pri
 pp3_colour      = is_undef($pp3_colour)      ? "blue" : $pp3_colour;      // printed part colour 3
 pp4_colour      = is_undef($pp4_colour)      ? "darkorange" : $pp4_colour;// printed part colour 4
 show_rays       = is_undef($show_rays)       ? false  : $show_rays;       // show camera sight lines and light direction
+show_threads    = is_undef($show_threads)    ? false  : $show_threads;    // show screw threads
 
 // Minimum wall is about two filaments wide but we extrude it closer to get better bonding
 squeezed_wall = $preview ? 2 * extrusion_width - layer_height * (1 - PI / 4)
@@ -59,7 +60,8 @@ grey60                          = [0.6, 0.6, 0.6];
 grey70                          = [0.7, 0.7, 0.7];
 grey80                          = [0.8, 0.8, 0.8];
 grey90                          = [0.9, 0.9, 0.9];
-brass                           = "gold";
+brass                           = [255/255, 215/255, 0/255];
+silver                          = [0.75, 0.75, 0.75];
 
 /*
  * Enums

lib.scad

@@ -60,10 +60,13 @@ include <vitamins/ball_bearings.scad>
 include <vitamins/light_strips.scad>
 include <vitamins/spools.scad>
 include <vitamins/mains_sockets.scad>
+include <vitamins/ldrs.scad>
+include <vitamins/geared_steppers.scad>
 
 use <vitamins/jack.scad>
 use <vitamins/meter.scad>
 use <vitamins/fuseholder.scad>
+use <vitamins/hygrometer.scad>
 
 use <vitamins/opengrab.scad>
 use <vitamins/wire.scad>
@@ -87,3 +90,4 @@ use <utils/layout.scad>
 use <utils/round.scad>
 use <utils/offset.scad>
 use <utils/sector.scad>
+use <utils/thread.scad>

libtest.scad

@@ -34,12 +34,14 @@ use <tests/d_connectors.scad>
 use <tests/displays.scad>
 use <tests/fans.scad>
 use <tests/fuseholder.scad>
+use <tests/geared_steppers.scad>
 use <tests/hot_ends.scad>
 use <tests/iecs.scad>
 use <tests/inserts.scad>
 use <tests/jack.scad>
 use <tests/leadnuts.scad>
 use <tests/leds.scad>
+use <tests/ldrs.scad>
 use <tests/light_strips.scad>
 use <tests/linear_bearings.scad>
 use <tests/meter.scad>
@@ -89,6 +91,7 @@ use <tests/strap_handle.scad>
 use <tests/ssr_shroud.scad>
 use <tests/psu_shroud.scad>
 use <tests/flat_hinge.scad>
+use <tests/pcb_mount.scad>
 
 x5 = 800;
 
@@ -156,7 +159,7 @@ fans_y = displays_y + 100;
 transformers_y = fans_y + 120;
 psus_y = transformers_y + 190;
 
-translate([x0 + 20, inserts_y])
+translate([x0 + 30, inserts_y])
     inserts();
 
 translate([x0, inserts_y])
@@ -252,6 +255,9 @@ components_y = toggles_y + 40;
 translate([x2, leds_y])
     leds();
 
+translate([x2 + 40, leds_y])
+    ldrs();
+
 translate([x2 + 8, carriers_y])
     carriers();
 
@@ -296,6 +302,12 @@ steppers_y = batteries_y + 70;
 translate([x3, veroboard_y])
     veroboard_test();
 
+translate([x3 + 70, veroboard_y + 30])
+    geared_steppers();
+
+translate([x3 + 140, veroboard_y + 20])
+    pcb_mounts();
+
 translate([x3, d_connectors_y])
     d_connectors();
 
@@ -305,7 +317,10 @@ translate([x3, iecs_y])
 translate([x3 + 15, modules_y])
     microview();
 
-translate([x3 + 40, modules_y])
+translate([x3 + 60, modules_y])
+    hygrometer();
+
+translate([x3 + 90, modules_y])
     modules();
 
 translate([x3, ssrs_y]) {

printed/butt_box.scad

@@ -27,6 +27,10 @@
 //! A list specifies the internal dimensions, screw type, top, bottom and side sheet types and the block
 //! maximum spacing.
 //!
+//!  * An optional name can be specified to allow more then one box in a project.
+//!  * An optional list of fixing blocks to be omitted can be given.
+//!  * Star washers can be omitted by setting the 11th parameter to false.
+//!
 //! Uses [fixing blocks](#fixing_block) and [corner blocks](#corner_block).
 //
 
@@ -34,17 +38,24 @@ use <fixing_block.scad>
 use <corner_block.scad>
 use <../utils/maths.scad>
 
-function bbox_screw(type)     = type[0]; //! Screw type for corner blocks
-function bbox_sheets(type)    = type[1]; //! Sheet type for the sides
-function bbox_base_sheet(type)= type[2]; //! Sheet type for the base
-function bbox_top_sheet(type) = type[3]; //! Sheet type for the top
-function bbox_span(type)      = type[4]; //! Maximum span between fixing blocks
-function bbox_width(type)     = type[5]; //! Internal width
-function bbox_depth(type)     = type[6]; //! Internal depth
-function bbox_height(type)    = type[7]; //! Internal height
+function bbox_screw(type)      = type[0]; //! Screw type for corner blocks
+function bbox_sheets(type)     = type[1]; //! Sheet type for the sides
+function bbox_base_sheet(type) = type[2]; //! Sheet type for the base
+function bbox_top_sheet(type)  = type[3]; //! Sheet type for the top
+function bbox_span(type)       = type[4]; //! Maximum span between fixing blocks
+function bbox_width(type)      = type[5]; //! Internal width
+function bbox_depth(type)      = type[6]; //! Internal depth
+function bbox_height(type)     = type[7]; //! Internal height
+function bbox_name(type)       = type[8] ? type[8] : "bbox"; //! Optional name if there is more than one box in a project
+function bbox_skip_blocks(type)= type[9] ? type[9] : [];  //! List of fixing blocks to skip, used to allow a hinged panel for example
+function star_washers(type)    = type[10] ? type[10] : is_undef(type[10]); //! Set to false to remove star washers.
+
+function bbox_volume(type) = bbox_width(type) * bbox_depth(type) * bbox_height(type) / 1000000; //! Internal volume in litres
+function bbox_area(type) = let(w =  bbox_width(type), d = bbox_depth(type), h = bbox_height(type)) //! Internal surdface area in m^2
+    2 * (w * d + w * h + d * h) / 1000000;
 
 module bbox_shelf_blank(type) { //! 2D template for a shelf
-    dxf("bbox_shelf");
+    dxf(str(bbox_name(type), "_shelf"));
 
     sheet_2D(bbox_sheets(type), bbox_width(type), bbox_depth(type), 1);
 }
@@ -60,18 +71,8 @@ function corner_block_positions(type) = let(
             y = [-1,-1,1,1][corner]
         ) translate([x * (width / 2), y * (depth / 2), z * height / 2]) *
           rotate([z > 0 ? 180 : 0, 0, corner * 90 + (z > 0 ? 90 : 0)])
-
     ];
 
-module corner_block_positions(type) {
-    bt = sheet_thickness(bbox_base_sheet(type));
-    tt = sheet_thickness(bbox_top_sheet(type));
-    for(p = corner_block_positions(type))
-        let($thickness = transform([0, 0, 0], p).z > 0 ? tt : bt)
-            multmatrix(p)
-                children();
-}
-
 function corner_holes(type) = [for(p = corner_block_positions(type), q = corner_block_holes(bbox_screw(type))) p * q];
 
 function fixing_block_positions(type) = let(
@@ -84,36 +85,28 @@ function fixing_block_positions(type) = let(
         dspans = floor(depth / span),
         dspan = depth / (dspans + 1),
         hspans = floor(height / span),
-        hspan = height / (hspans + 1)
+        hspan = height / (hspans + 1),
+        skips = bbox_skip_blocks(type)
     )
     [
         for(i = [0 : 1 : wspans - 1], y = [-1, 1], z = [-1, 1])
-            translate([(i - (wspans - 1) / 2) * wspan, y * depth / 2, z * height / 2]) *
-            rotate([0, z * 90 + 90, y * 90 + 90]),
+            if(!in(skips, [0, y, z]))
+                translate([(i - (wspans - 1) / 2) * wspan, y * depth / 2, z * height / 2]) *
+                rotate([0, z * 90 + 90, y * 90 + 90]),
 
         for(i = [0 : 1 : dspans - 1], x = [-1, 1], z = [-1, 1])
-            translate([x * width / 2, (i - (dspans - 1) / 2) * dspan, z * height / 2]) *
-            rotate([0, z * 90 + 90, x * 90]),
+            if(!in(skips, [x, 0, z]))
+                translate([x * width / 2, (i - (dspans - 1) / 2) * dspan, z * height / 2]) *
+                rotate([0, z * 90 + 90, x * 90]),
 
         for(i = [0 : 1 : hspans - 1], x = [-1, 1], y = [-1, 1])
-            translate([x * width / 2, y * depth / 2, (i - (hspans - 1) / 2) * hspan]) *
-            rotate([y > 0 ? 180 : 0, x * y * 90, 0]),
-
+            if(!in(skips, [x, y, 0]))
+                translate([x * width / 2, y * depth / 2, (i - (hspans - 1) / 2) * hspan]) *
+                rotate([y > 0 ? 180 : 0, x * y * 90, 0]),
     ];
 
 function side_holes(type) = [for(p = fixing_block_positions(type), q = fixing_block_holes(bbox_screw(type))) p * q];
 
-module fixing_block_positions(type) {
-    t = sheet_thickness(bbox_sheets(type));
-    bt = sheet_thickness(bbox_base_sheet(type));
-    tt = sheet_thickness(bbox_top_sheet(type));
-    h = bbox_height(type) / 2 - 1;
-    for(p = fixing_block_positions(type))
-        let(z = transform([0, 0, 0], p).z, $thickness = z > h ? tt : z < -h ? bt : t)
-            multmatrix(p)
-                children();
-}
-
 module drill_holes(type, t)
     for(list = [corner_holes(type), side_holes(type)], p = list)
         let(q = t * p)
@@ -122,7 +115,7 @@ module drill_holes(type, t)
                     drill(screw_clearance_radius(bbox_screw(type)), 0);
 
 module bbox_base_blank(type) { //! 2D template for the base
-    dxf("bbox_base");
+    dxf(str(bbox_name(type), "_base"));
 
     difference() {
         sheet_2D(bbox_base_sheet(type), bbox_width(type), bbox_depth(type), 1);
@@ -132,7 +125,7 @@ module bbox_base_blank(type) { //! 2D template for the base
 }
 
 module bbox_top_blank(type) { //! 2D template for the top
-    dxf("bbox_top");
+    dxf(str(bbox_name(type), "_top"));
 
     t = sheet_thickness(bbox_sheets(type));
 
@@ -144,36 +137,40 @@ module bbox_top_blank(type) { //! 2D template for the top
     }
 }
 
-module bbox_left_blank(type) { //! 2D template for the left side
-    dxf("bbox_left");
+function subst_sheet(type, sheet) =
+    let(s = bbox_sheets(type))
+        sheet ? assert(sheet_thickness(sheet) == sheet_thickness(s)) sheet : s;
+
+module bbox_left_blank(type, sheet = false) { //! 2D template for the left side
+    dxf(str(bbox_name(type), "_left"));
 
     t = sheet_thickness(bbox_sheets(type));
     bb = sheet_thickness(bbox_base_sheet(type));
 
     difference() {
         translate([-t / 2, -bb / 2])
-            sheet_2D(bbox_sheets(type), bbox_depth(type) + t, bbox_height(type) + bb);
+            sheet_2D(subst_sheet(type, sheet), bbox_depth(type) + t, bbox_height(type) + bb);
 
         drill_holes(type, rotate([0, 90, 90]) * translate([bbox_width(type) / 2, 0]));
     }
 }
 
-module bbox_right_blank(type) { //! 2D template for the right side
-    dxf("bbox_right");
+module bbox_right_blank(type, sheet = false) { //! 2D template for the right side
+    dxf(str(bbox_name(type), "_right"));
 
     t = sheet_thickness(bbox_sheets(type));
     bb = sheet_thickness(bbox_base_sheet(type));
 
     difference() {
         translate([t / 2, -bb / 2])
-            sheet_2D(bbox_sheets(type), bbox_depth(type) + t, bbox_height(type) + bb);
+            sheet_2D(subst_sheet(type, sheet), bbox_depth(type) + t, bbox_height(type) + bb);
 
-        drill_holes(type, rotate([0, -90, 90]) * translate([-bbox_width(type) / 2, 0]));
+        drill_holes(type, rotate([0, 90, 90]) * translate([-bbox_width(type) / 2, 0]));
     }
 }
 
-module bbox_front_blank(type) { //! 2D template for the front
-    dxf("bbox_front");
+module bbox_front_blank(type, sheet = false, width = 0) { //! 2D template for the front
+    dxf(str(bbox_name(type), "_front"));
 
     t = sheet_thickness(bbox_sheets(type));
     bb = sheet_thickness(bbox_base_sheet(type));
@@ -181,23 +178,23 @@ module bbox_front_blank(type) { //! 2D template for the front
 
     difference() {
         translate([0, (bt - bb) / 2])
-            sheet_2D(bbox_sheets(type), bbox_width(type) + 2 * t, bbox_height(type) + bb + bt);
+            sheet_2D(subst_sheet(type, sheet), max(bbox_width(type) + 2 * t, width), bbox_height(type) + bb + bt);
 
         drill_holes(type, rotate([-90, 0, 0]) * translate([0, bbox_depth(type) / 2]));
     }
 }
 
-module bbox_back_blank(type) { //! 2D template for the back
-    dxf("bbox_back");
+module bbox_back_blank(type, sheet = false) { //! 2D template for the back
+    dxf(str(bbox_name(type), "_back"));
 
     bb = sheet_thickness(bbox_base_sheet(type));
     t = sheet_thickness(bbox_sheets(type));
 
     difference() {
         translate([0, -bb / 2])
-            sheet_2D(bbox_sheets(type), bbox_width(type), bbox_height(type) + bb);
+            sheet_2D(subst_sheet(type, sheet), bbox_width(type), bbox_height(type) + bb);
 
-        drill_holes(type, rotate([90, 0, 0]) * translate([0, -bbox_depth(type) / 2]));
+        drill_holes(type, rotate([-90, 0, 0]) * translate([0, -bbox_depth(type) / 2]));
     }
 }
 
@@ -208,54 +205,64 @@ module bbox_front(type) render_2D_sheet(bbox_sheets(type)) bbox_front_blank(type
 module bbox_left(type)  render_2D_sheet(bbox_sheets(type)) bbox_left_blank(type);       //! Default left side, can be overridden to customise
 module bbox_right(type) render_2D_sheet(bbox_sheets(type)) bbox_right_blank(type);      //! Default right side, can be overridden to customise
 
-module _bbox_assembly(type, top = true, base = true, left = true, right = true, back = true, front = true) //! The box assembly, wrap with a local copy without parameters
-assembly("bbox") {
+module _bbox_assembly(type, top = true, base = true, left = true, right = true, back = true, front = true) { //! The box assembly, wrap with a local copy without parameters
     width = bbox_width(type);
     depth = bbox_depth(type);
     height = bbox_height(type);
-    echo("Box:", width, depth, height);
+    echo("Box:", width, depth, height, volume = bbox_volume(type), area = bbox_area(type));
 
     t = sheet_thickness(bbox_sheets(type));
     bt = sheet_thickness(bbox_base_sheet(type));
     tt = sheet_thickness(bbox_top_sheet(type));
 
-    corner_block_positions(type)
-        fastened_corner_block_assembly(t, bbox_screw(type), $thickness);
+    function is_missing_screw(p) = p.y > depth / 2 - 1 ? !back : false;
 
-    fixing_block_positions(type)
-        fastened_fixing_block_assembly(t, bbox_screw(type), thickness2 = $thickness);
+    assembly(bbox_name(type)) {
 
-    for(x = [-1, 1])
-        translate([x * (width / 2 + t / 2 + eps + 25 * exploded()), 0])
-            rotate([90, 0, x * 90])
-                if(x > 0) {
-                    if(right)
-                        bbox_right(type);
+        for(p = corner_block_positions(type))
+            let(q = transform([0, 0, 0], p), thickness = q.z > 0 ? tt : bt)
+                multmatrix(p)
+                    fastened_corner_block_assembly(is_missing_screw(q) && ((q.z > 0) != (q.x > 0)) ? 0 : t, bbox_screw(type), thickness,
+                                                   is_missing_screw(q) && ((q.z > 0) == (q.x > 0)) ? 0 : t, star_washers = star_washers(type));
+
+        h = height / 2 - 1;
+        for(p = fixing_block_positions(type))
+            let(q = transform([0, 0, 0], p), thickness = q.z > h ? tt : q.z < -h ? bt : t)
+                multmatrix(p)
+                    fastened_fixing_block_assembly(is_missing_screw(q) ? 0 : t, bbox_screw(type), thickness2 = thickness, star_washers = star_washers(type));
+
+        for(x = [-1, 1])
+            translate([x * (width / 2 + t / 2 + eps + 25 * exploded()), 0])
+                rotate([90, 0, x * 90])
+                    if(x > 0) {
+                        if(right)
+                            bbox_right(type);
+                    }
+                    else
+                        if(left)
+                            bbox_left(type);
+
+        for(y = [1, -1])
+            translate([0, y * (depth / 2 + t / 2 + eps + 25 * exploded())])
+                rotate([90, 0, y * 90 + 90])
+                    if(y < 0) {
+                        if(front)
+                            bbox_front(type);
+                    }
+                    else
+                        if(back)
+                            bbox_back(type);
+
+        for(z = [-1, 1]) {
+            sheet_thickness = z > 0 ? tt : bt;
+            translate_z(z * (height / 2 + sheet_thickness / 2 + eps + 100 * exploded()))
+                if(z > 0) {
+                    if(top)
+                        bbox_top(type);
                 }
                 else
-                    if(left)
-                        bbox_left(type);
-
-    for(y = [-1, 1])
-        translate([0, y * (depth / 2 + t / 2 + eps + 25 * exploded())])
-            rotate([90, 0, y * 90 + 90])
-                if(y < 0) {
-                    if(front)
-                        bbox_front(type);
-                }
-                else
-                    if(back)
-                        bbox_back(type);
-
-    for(z = [-1, 1]) {
-        sheet_thickness = z > 0 ? tt : bt;
-        translate_z(z * (height / 2 + sheet_thickness / 2 + eps + 100 * exploded()))
-            if(z > 0) {
-                if(top)
-                    bbox_top(type);
-            }
-            else
-                if(base)
-                    bbox_base(type);
+                    if(base)
+                        bbox_base(type);
+        }
     }
 }

printed/cable_grommets.scad

@@ -130,7 +130,7 @@ module round_grommet_bottom(diameter, od = undef) { //! Generate the STL for a r
 }
 
 module round_grommet_hole(diameter, h = 100) //! Make a hole for a round grommet
-    drill(diameter / 2 + wall + clearance, h);
+    drill(corrected_radius(diameter / 2) + wall + clearance, h);
 
 module round_grommet_assembly(diameter, thickness, od = undef) {
     color(pp1_colour)
@@ -149,12 +149,17 @@ module mouse_grommet_hole(r, h = 50, z = undef, expand = wall + clearance) //! M
         hull(){
             R = r + expand;
             translate([0, z == undef ? R : z])
-                semi_circle(R);
+                if(expand)
+                    semi_circle(R);
+                else
+                    semi_teardrop(r = R, h = 0);
 
             translate([-R, 0])
                 square([2 * R, eps]);
         }
 
+function mouse_grommet_offset(r) = r + wall;
+
 module mouse_grommet(r, thickness) { //! Make the STL for a mouse grommet
     stl(str("mouse_grommet_", r * 10, "_", thickness));
 
@@ -167,7 +172,7 @@ module mouse_grommet(r, thickness) { //! Make the STL for a mouse grommet
                 translate_z(side * (width - wall) / 2)
                     linear_extrude(height = wall, center = true)
                         difference() {
-                            mouse_grommet_hole(r + wall + overlap, z = r + wall, h = 0, expand = 0);
+                            mouse_grommet_hole(r, z = r + wall, h = 0, expand = wall + overlap);
 
                         translate([0, wall])
                             mouse_grommet_hole(r, h = 0, expand = 0);
@@ -182,6 +187,23 @@ module mouse_grommet(r, thickness) { //! Make the STL for a mouse grommet
         }
 }
 
+module mouse_grommet_assembly(r, thickness)
+    color(pp1_colour)
+        rotate([-90, 0, 0])
+            mouse_grommet(r, thickness);
+
 module ribbon_grommet_20_3_stl() ribbon_grommet(20, 3);
-module mouse_grommet_20_3_stl() mouse_grommet(2,3);
-module mouse_grommet_30_3_stl() mouse_grommet(3,3);
+module mouse_grommet_15_3_stl() mouse_grommet(1.5, 3);
+module mouse_grommet_20_3_stl() mouse_grommet(2, 3);
+module mouse_grommet_25_3_stl() mouse_grommet(2.5, 3);
+module mouse_grommet_30_3_stl() mouse_grommet(3, 3);
+
+module round_grommet_bottom_30_stl() round_grommet_bottom(3);
+module round_grommet_bottom_40_stl() round_grommet_bottom(4);
+module round_grommet_bottom_50_stl() round_grommet_bottom(5);
+module round_grommet_bottom_60_stl() round_grommet_bottom(6);
+
+module round_grommet_top_30_3_stl() round_grommet_top(3, 3);
+module round_grommet_top_40_3_stl() round_grommet_top(4, 3);
+module round_grommet_top_50_3_stl() round_grommet_top(5, 3);
+module round_grommet_top_60_3_stl() round_grommet_top(6, 3);

printed/corner_block.scad

@@ -24,6 +24,11 @@
 //! See [butt_box](#Butt_box) for an example of usage.
 //!
 //! Note that the block with its inserts is defined as a sub assembly, but its fasteners get added to the parent assembly.
+//!
+//! Specific fasteners can be omitted by setting a side's thickness to 0 and the block omitted by setting ```show_block``` to false.
+//! This allows the block and one set of fasteners to be on one assembly and the other fasteners on the mating assemblies.
+//!
+//! Star washers can be omitted by setting ```star_washers``` to false.
 //
 include <../core.scad>
 include <../vitamins/screws.scad>
@@ -57,8 +62,8 @@ module corner_block_v_hole(screw = def_screw) //! Place children at the bottom s
     multmatrix(corner_block_v_hole(screw))
         children();
 
-module corner_block_h_holes(screw = def_screw) //! Place children at the side screw holes
-    for(p = corner_block_h_holes(screw))
+module corner_block_h_holes(screw = def_screw, index = undef) //! Place children at the side screw holes
+    for(p = !is_undef(index) ? [corner_block_h_holes(screw)[index]] : corner_block_h_holes(screw))
         multmatrix(p)
             children();
 
@@ -126,22 +131,33 @@ assembly(str("corner_block_M", 20 * screw_radius(screw))) {
         insert(insert);
 }
 
-module fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, name = false) { //! Printed block with all fasteners
+module fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, thickness_side2 = undef, name = false, show_block = true, star_washers = true) { //! Printed block with all fasteners
+    thickness2 = !is_undef(thickness_below) ? thickness_below : thickness;
+    thickness3 = !is_undef(thickness_side2) ? thickness_side2 : thickness;
     washer = screw_washer(screw);
     insert = screw_insert(screw);
-    screw_length = screw_shorter_than(2 * washer_thickness(washer) + thickness + insert_length(insert) + overshoot);
+    function screw_length(t) = screw_shorter_than((star_washers ? 2 : 1) * washer_thickness(washer) + t + insert_length(insert) + overshoot);
+    screw_length = screw_length(thickness);
+    screw_length2 = screw_length(thickness2);
+    screw_length3 = screw_length(thickness3);
 
-    corner_block_assembly(screw, name) children();
+    if(show_block)
+        corner_block_assembly(screw, name) children();
 
-    corner_block_h_holes(screw)
-        translate_z(thickness)
-            screw_and_washer(screw, screw_length, true);
+    if(thickness)
+        corner_block_h_holes(screw, 0)
+            translate_z(thickness)
+                screw_and_washer(screw, screw_length, star_washers);
 
-    thickness2 = thickness_below ? thickness_below : thickness;
-    screw_length2 = screw_shorter_than(2 * washer_thickness(washer) + thickness2 + insert_length(insert) + overshoot);
-    corner_block_v_hole(screw)
-        translate_z(thickness2)
-            screw_and_washer(screw, screw_length2, true);
+    if(thickness3)
+        corner_block_h_holes(screw, 1)
+            translate_z(thickness3)
+                screw_and_washer(screw, screw_length3, star_washers);
+
+    if(thickness2)
+        corner_block_v_hole(screw)
+            translate_z(thickness2)
+                screw_and_washer(screw, screw_length2, star_washers);
 }
 
 module corner_block_M20_stl() corner_block(M2_cap_screw);

printed/fixing_block.scad

@@ -24,6 +24,11 @@
 //! See [butt_box](#Butt_box) for an example of usage.
 //!
 //! Note that the block with its inserts is defined as a sub assembly, but its fasteners get added to the parent assembly.
+//!
+//! Specific fasteners can be omitted by setting a side's thickness to 0 and the block omitted by setting ```show_block``` to false.
+//! This allows the block and one set of fasteners to be on one assembly and the other fasteners on the mating assemblies.
+//!
+//! Star washers can be omitted by setting ```star_washers``` to false.
 //
 include <../core.scad>
 include <../vitamins/screws.scad>
@@ -116,20 +121,24 @@ assembly(str("fixing_block_M", 20 * screw_radius(screw))) {
         insert(insert);
 }
 
-module fastened_fixing_block_assembly(thickness, screw = def_screw, screw2 = undef, thickness2 = undef) { //! Assembly with fasteners in place
+module fastened_fixing_block_assembly(thickness, screw = def_screw, screw2 = undef, thickness2 = undef, show_block = true, star_washers = true) { //! Assembly with fasteners in place
     module fb_screw(screw, thickness) {
         washer = screw_washer(screw);
         insert = screw_insert(screw);
-        screw_length = screw_longer_than(2 * washer_thickness(washer) + thickness + insert_length(insert));
+        screw_length = screw_longer_than((star_washers ? 2 : 1) * washer_thickness(washer) + thickness + insert_length(insert));
 
-        translate_z(thickness)
-            screw_and_washer(screw, screw_length, true);
+        if(thickness)
+            translate_z(thickness)
+                screw_and_washer(screw, screw_length, star_washers);
     }
 
-    no_pose() fixing_block_assembly(screw);
+    if(show_block)
+        no_pose()
+            fixing_block_assembly(screw);
 
+    t2 = !is_undef(thickness2) ? thickness2 : thickness;
     fixing_block_v_holes(screw)
-        fb_screw(screw, thickness2 ? thickness2 : thickness);
+        fb_screw(screw, t2);
 
     fixing_block_h_hole(screw)
         fb_screw(screw2 ? screw2 : screw, thickness);

printed/foot.scad

@@ -66,7 +66,7 @@ module foot(type = foot) { //! Generate STL
     }
 }
 
-module foot_assembly(t = 0, type = foot) { //! Assembly with fasteners in place for specified sheet thickness
+module foot_assembly(t = 0, type = foot, flip = false) { //! Assembly with fasteners in place for specified sheet thickness
     screw = foot_screw(type);
     washer = screw_washer(screw);
     nut = screw_nut(screw);
@@ -79,11 +79,17 @@ module foot_assembly(t = 0, type = foot) { //! Assembly with fasteners in place
         if(t)
             explode(15, true)
                 translate_z(foot_thickness(type))
-                    screw_and_washer(screw, screw_length);
+                    if(flip)
+                        nut_and_washer(nut, true);
+                    else
+                        screw_and_washer(screw, screw_length);
     }
     if(t)
         translate_z(t)
-            nut_and_washer(nut, true);
+            if(flip)
+                screw_and_washer(screw, screw_length);
+            else
+                nut_and_washer(nut, true);
 }
 
 module insert_foot(type = insert_foot) { //! Generate STL for foot with insert

printed/pcb_mount.scad

@@ -0,0 +1,124 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! A frame to mount a PCB by its corners when it has no mounting holes.
+//! The stl must be given a parameterless wrapper in the project that uses it.
+//
+include <../core.scad>
+include <../vitamins/screws.scad>
+use <../vitamins/pcb.scad>
+
+clearance = 0.2;
+min_wall = extrusion_width * 2;
+wall = 2;
+
+overlap = 2;
+
+screw = M3_cap_screw;
+screw_clearance_r = 3.1 / 2;
+pillar_r = corrected_radius(screw_clearance_r) + wall;
+
+function pillar_x_pitch(pcb) = pcb_length(pcb) + 2 * clearance + 2 * (pillar_r - overlap) / sqrt(2); //! x pitch of screw pillars
+function pillar_y_pitch(pcb) = pcb_width(pcb)  + 2 * clearance + 2 * (pillar_r - overlap) / sqrt(2); //! y pitch of screw pillars
+
+function pcb_mount_length(pcb) = pillar_x_pitch(pcb) + 2 * pillar_r; //! Outside length of the mount
+function pcb_mount_width(pcb)  = pillar_y_pitch(pcb) + 2 * pillar_r; //! Outside width of the mount
+
+frame_w = 3;
+frame_t = 2;
+
+washer_thickness = 1.25;
+
+module pcb_mount_screw_positions(pcb) //! Positions of the screws and pillars
+    for(x = [-1, 1], y = [-1, 1])
+        translate([x * pillar_x_pitch(pcb) / 2, y * pillar_y_pitch(pcb) / 2])
+            children();
+
+module pcb_mount_holes(pcb, h = 0)          //! Drill holes for PCB mount
+    pcb_mount_screw_positions(pcb)
+        drill(screw_clearance_radius(screw), h);
+
+module pcb_mount_ring()
+    difference() {
+        circle(pillar_r);
+
+        poly_circle(screw_clearance_r);
+    }
+
+module pcb_mount_washer_stl() //! A plastic washer to clamp a PCB
+    linear_extrude(height = washer_thickness)
+        pcb_mount_ring();
+
+module pcb_mount(pcb, height = 5, washers = true) { //! Make the STL of a pcb mount for the specified PCB.
+    stl(str("pcb_mount_", pcb[0], "_", height));
+
+    y_pitch = pcb_width(pcb) > 4 * pillar_r + 4 ? pillar_r + 1
+                                                : pcb_width(pcb) / 2 + frame_w + 1 + pillar_r;
+
+    if(washers)
+        for(x = [-1, 1], y = [-1, 1])
+            translate([x * (pillar_r + 1), y * y_pitch, 0])
+                pcb_mount_washer_stl();
+
+    for(x = [-1, 1])
+        translate([x * pillar_x_pitch(pcb) / 2, 0, frame_t / 2])
+            cube([frame_w, pillar_y_pitch(pcb) - 2 * wall, frame_t], center = true);
+
+    for(y = [-1, 1])
+        translate([0, y * pillar_y_pitch(pcb) / 2, frame_t / 2])
+            cube([pillar_x_pitch(pcb) - 2 * wall, frame_w, frame_t], center = true);
+
+    pcb_mount_screw_positions(pcb)
+        linear_extrude(height = height)
+            pcb_mount_ring();
+
+    linear_extrude(height = height + pcb_thickness(pcb) - layer_height)
+        difference() {
+            pcb_mount_screw_positions(pcb)
+                pcb_mount_ring();
+
+            square([pcb_length(pcb) + 2 * clearance, pcb_width(pcb) + 2 * clearance], center = true);
+        }
+}
+
+module pcb_mount_assembly(pcb, thickness, height = 5) { //! A PCB mount assembly with fasteners
+    translate_z(height)
+        pcb(pcb);
+
+    color(pp1_colour) pcb_mount(pcb, washers = false);
+
+    washer = screw_washer(screw);
+    nut = screw_nut(screw);
+    t = pcb_thickness(pcb);
+    screw_length = screw_longer_than(height + t + washer_thickness + thickness + washer_thickness(washer) + nut_thickness(nut, true));
+
+    pcb_mount_screw_positions(pcb) {
+        translate_z(height + t) {
+            color(pp2_colour) pcb_mount_washer_stl();
+
+            translate_z(washer_thickness)
+                screw(screw, screw_length);
+        }
+
+        translate_z(-thickness)
+            vflip()
+                nut_and_washer(nut, true);
+    }
+}

printed/psu_shroud.scad

@@ -33,10 +33,8 @@ wall = 1.8;
 top = 1.5;
 screw = M3_cap_screw;
 insert = screw_insert(screw);
-boss_r = wall + corrected_radius(insert_hole_radius(insert));
-boss_h = insert_hole_length(insert);
+boss_r = insert_boss_radius(insert, wall);
 counter_bore = 2;
-boss_h2 = boss_h + counter_bore;
 rad = 2;
 clearance = layer_height;
 overlap = 6;
@@ -137,49 +135,13 @@ module psu_shroud(type, cable_d, name, cables = 1) { //! Generate the STL file f
                         translate([0, height / 2])
                                 vertical_tearslot(h = 0, r = cable_d / 2, l = cable_d);
                 }
-
-    mirror([0, 1, 0]) {
-        // insert boss
-        translate_z(height - boss_h)
-            linear_extrude(height = boss_h)
-                psu_shroud_hole_positions(type)
-                    difference() {
-                        hull() {
-                            circle(boss_r);
-
-                            translate([0, $side * (boss_r - 1)])
-                                square([2 * boss_r, eps], center = true);
-                        }
-                        poly_circle(insert_hole_radius(insert));
-                    }
-
-        // insert boss counter_bore
-        translate_z(height - boss_h2)
-            linear_extrude(height = counter_bore + eps)
-                psu_shroud_hole_positions(type)
-                    difference() {
-                        hull() {
-                            circle(boss_r);
-
-                            translate([0, $side * (boss_r - 1)])
-                                square([2 * boss_r, eps], center = true);
-                        }
-                        poly_circle(insert_screw_diameter(insert) / 2 + 0.1);
-                    }
-        // support cones
-        translate_z(height - boss_h2)
-            psu_shroud_hole_positions(type)
-                hull() {
-                    cylinder(h = eps, r = boss_r - eps);
-
-                    translate([0, $side * (boss_r - 1)])
-                        cube([2 * boss_r, eps, eps], center = true);
-
-                    translate([0, $side * (boss_r - wall), - (2 * boss_r - wall)])
-                        cube(eps);
-                }
-    }
-}
+    // insert lugs
+    mirror([0, 1, 0])
+        psu_shroud_hole_positions(type)
+            translate_z(height)
+                rotate($side * 90)
+                    insert_lug(insert, wall, counter_bore);
+ }
 
 module psu_shroud_assembly(type, cable_d, name, cables = 1) //! The printed parts with inserts fitted
 assembly(str("psu_shroud_", name)) {

printed/screw_knob.scad

@@ -30,7 +30,7 @@ knob_stem_h = 6;
 knob_thickness = 4;
 knob_r = 8;
 knob_wave = 1;
-knob_waves = 9;
+knob_waves = 5;
 knob_height = knob_stem_h + knob_thickness;
 function knob_height() = knob_height;
 
@@ -73,5 +73,8 @@ assembly(str("screw_knob_M", 20 * screw_radius(screw), "_", length)) {
 module screw_knob_M30_stl() screw_knob(M3_hex_screw);
 module screw_knob_M40_stl() screw_knob(M4_hex_screw);
 
+//! * Press the M3 x 16 hex screw into the knob
 module screw_knob_M30_16_assembly() screw_knob_assembly(M3_hex_screw, 16);
+
+//! * Press the M4 x 16 hex screw into the knob
 module screw_knob_M40_16_assembly() screw_knob_assembly(M4_hex_screw, 16);

printed/ssr_shroud.scad

@@ -33,10 +33,8 @@ wall = 1.8;
 top = 1.5;
 screw = M3_cap_screw;
 insert = screw_insert(screw);
-boss_r = wall + corrected_radius(insert_hole_radius(insert));
-boss_h = insert_hole_length(insert);
+boss_r = insert_boss_radius(insert, wall);
 counter_bore = 2;
-boss_h2 = boss_h + counter_bore;
 rad = 3;
 clearance = layer_height;
 
@@ -61,7 +59,6 @@ module ssr_shroud_holes(type, cable_d) { //! Drill the screw and ziptie holes
         translate([ssr_shroud_cable_x(type, cable_d), side * (ssr_width(type) / 2 - 2 * boss_r)])
             rotate(-90)
                 cable_tie_holes(cable_d / 2, h = 0);
-
 }
 
 module ssr_shroud(type, cable_d, name) {    //! Generate the STL file for a specified ssr and cable
@@ -103,45 +100,11 @@ module ssr_shroud(type, cable_d, name) {    //! Generate the STL file for a spec
                             vertical_tearslot(h = 0, r = cable_d / 2, l = cable_d);
                     }
     // insert boss
-    translate_z(height - boss_h)
-        linear_extrude(height = boss_h)
-            ssr_shroud_hole_positions(type)
-                difference() {
-                    hull() {
-                        circle(boss_r);
-
-                        translate([0, -$side * (boss_r - 1)])
-                            square([2 * boss_r, eps], center = true);
-                    }
-                    poly_circle(insert_hole_radius(insert));
-                }
-
-    // insert boss counter_bore
-    translate_z(height - boss_h2)
-        linear_extrude(height = counter_bore + eps)
-            ssr_shroud_hole_positions(type)
-                difference() {
-                    hull() {
-                        circle(boss_r);
-
-                        translate([0, -$side * (boss_r - 1)])
-                            square([2 * boss_r, eps], center = true);
-                    }
-                    poly_circle(insert_screw_diameter(insert) / 2 + 0.1);
-                }
-    // support cones
     ssr_shroud_hole_positions(type)
-        hull() {
-            translate_z(-height + boss_h2) {
-                cylinder(h = eps, r = boss_r - eps);
-
-                translate([0, -$side * (boss_r - 1)])
-                    cube([2 * boss_r, eps, eps], center = true);
-            }
-            translate([0, -$side * (boss_r - wall), -height + boss_h2 + (2 * boss_r - wall)])
-                cube(eps);
-        }
-
+        vflip()
+            translate_z(height)
+                rotate($side * 90)
+                    insert_lug(insert, wall, counter_bore);
 }
 
 module ssr_shroud_assembly(type, cable_d, name) //! The printed parts with inserts fitted
@@ -153,7 +116,6 @@ assembly(str("ssr_shroud_", name)) {
 
     ssr_shroud_hole_positions(type)
         insert(insert);
-
 }
 
 module ssr_shroud_fastened_assembly(type, cable_d, thickness, name) //! Assembly with screws in place
@@ -177,6 +139,4 @@ module ssr_shroud_fastened_assembly(type, cable_d, thickness, name) //! Assembly
                     color(grey20)
                         cylinder(d = cable_d, h = 20, center = true);
         }
-
-
 }

readme.md

@@ -17,34 +17,36 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
 
 ## Table of Contents<a name="top"/>
 <table><tr>
-<th align="left"> Vitamins A-N </th><th align="left"> Vitamins O-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
-<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#Bom">Bom</a> </td></tr>
+<th align="left"> Vitamins A-M </th><th align="left"> Vitamins N-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
+<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#Bom">Bom</a> </td></tr>
 <tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
-<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Pcbs">Pcbs</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Global">Global</a> </td></tr>
-<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
-<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Psus">Psus</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Global">Global</a> </td></tr>
+<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Pcbs">Pcbs</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
+<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Psus">Psus</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Pcb_mount">Pcb_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Psu_shroud">Psu_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Iecs">Iecs</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Ssr_shroud">Ssr_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Ssrs">Ssrs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Ldrs">Ldrs</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Leds">Leds</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Modules">Modules</a> </td><td></td><td></td><td></td><td></td></tr>
 </table>
 
 ---
@@ -163,6 +165,8 @@ exposing enough information to make a battery box.
 Models timing belt running over toothed or smooth pulleys and calculates an accurate length.
 Only models 2D paths, so not core XY!
 
+To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
+
 By default the path is a closed loop but a gap length and position can be specified to make open loops.
 
 Individual teeth are not drawn, instead they are represented by a lighter colour.
@@ -256,7 +260,7 @@ Models of radial blowers.
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | ```blower(PE4020)``` |  Blower Pengda Technology 4020 |
-|   1 | ```blower(RM5015)``` |  Blower Runda RB5015 |
+|   1 | ```blower(RB5015)``` |  Blower Runda RB5015 |
 |   3 | ```screw(M3_cap_screw, 20)``` |  Screw M3 cap x 20mm |
 |   2 | ```screw(M4_cap_screw, 25)``` |  Screw M4 cap x 25mm |
 |   3 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
@@ -475,55 +479,6 @@ Various electronic components used in hot ends and heated beds.
 |   1 | ```resistor(Honewell)``` |  Thermistor Honeywell 135-104LAC-J01 100K 1% |
 
 
-<a href="#top">Top</a>
-
----
-<a name="Displays"></a>
-## Displays
-LCD dispays.
-
-
-[vitamins/displays.scad](vitamins/displays.scad) Object definitions.
-
-[vitamins/display.scad](vitamins/display.scad) Implementation.
-
-[tests/displays.scad](tests/displays.scad) Code for this example.
-
-### Properties
-| Function | Description |
-|:--- |:--- |
-| ```display_aperture(type)``` | Size of the aperture including its depth |
-| ```display_height(type)``` | Depth of the metal part |
-| ```display_pcb(type)``` | PCB mounted on the back |
-| ```display_pcb_offset(type)``` | 3D offset of the PCB centre |
-| ```display_ribbon(type)``` | Keep out region for ribbon cable |
-| ```display_thickness(type)``` | Height of the metal part |
-| ```display_threads(type)``` | Length that studs protrude from the PCB holes |
-| ```display_touch_screen(type)``` | Touch screen position and size |
-| ```display_width(type)``` | Width of the metal part |
-
-### Functions
-| Function | Description |
-|:--- |:--- |
-| ```display_depth(type)``` | Total thickness including touch screen and PCB |
-| ```display_ts_thickness(type)``` | Touch screen thickness or 0 |
-
-### Modules
-| Module | Description |
-|:--- |:--- |
-| ```display(type)``` | Draw specified display |
-| ```display_aperture(type, clearance, clear_pcb = false)``` | Make aperture cutout |
-
-![displays](tests/png/displays.png)
-
-### Vitamins
-| Qty | Module call | BOM entry |
-| ---:|:--- |:---|
-|   1 | ```display(HDMI5)``` |  HDMI display 5" |
-|   1 | ```display(LCD1602A)``` |  LCD display 1602A |
-|   1 | ```display(SSD1963_4p3)``` |  LCD display SSD1963 4.3" |
-
-
 <a href="#top">Top</a>
 
 ---
@@ -580,6 +535,56 @@ D-connectors. Can be any number of ways, male or female, solder buckets, PCB mou
 |   6 | ```d_pillar()``` |  D-type connector pillar |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Displays"></a>
+## Displays
+LCD dispays.
+
+
+[vitamins/displays.scad](vitamins/displays.scad) Object definitions.
+
+[vitamins/display.scad](vitamins/display.scad) Implementation.
+
+[tests/displays.scad](tests/displays.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```display_aperture(type)``` | Size of the aperture including its depth |
+| ```display_height(type)``` | Depth of the metal part |
+| ```display_pcb(type)``` | PCB mounted on the back |
+| ```display_pcb_offset(type)``` | 3D offset of the PCB centre |
+| ```display_ribbon(type)``` | Keep out region for ribbon cable |
+| ```display_thickness(type)``` | Height of the metal part |
+| ```display_threads(type)``` | Length that studs protrude from the PCB holes |
+| ```display_touch_screen(type)``` | Touch screen position and size |
+| ```display_width(type)``` | Width of the metal part |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```display_depth(type)``` | Total thickness including touch screen and PCB |
+| ```display_ts_thickness(type)``` | Touch screen thickness or 0 |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```display(type)``` | Draw specified display |
+| ```display_aperture(type, clearance, clear_pcb = false)``` | Make aperture cutout |
+
+![displays](tests/png/displays.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```display(HDMI5)``` |  HDMI display 5" |
+|   1 | ```display(LCD1602A)``` |  LCD display 1602A |
+|   1 | ```display(LCDS7282B)``` |  LCD display S-7282B |
+|   1 | ```display(SSD1963_4p3)``` |  LCD display SSD1963 4.3" |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -611,16 +616,11 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 | ```fan_thickness(type)``` | Thickness of the frame |
 | ```fan_width(type)``` | Width of square |
 
-### Functions
-| Function | Description |
-|:--- |:--- |
-| ```fan_screw_length(type, thickness)``` | Screw length required |
-
 ### Modules
 | Module | Description |
 |:--- |:--- |
 | ```fan(type)``` | Draw specified fan, origin in the centre |
-| ```fan_assembly(type, thickness, include_fan = true)``` | Fan with its fasteners |
+| ```fan_assembly(type, thickness, include_fan = true, screw = false, full_depth = false)``` | Fan with its fasteners |
 | ```fan_hole_positions(type, z = undef)``` | Position children at the screw hole positions |
 | ```fan_holes(type, poly = false, screws = true, h = 100)``` | Make all the holes for the fan, or just the aperture if ```screws``` is false. Set ```poly``` true for poly_holes. |
 
@@ -630,6 +630,7 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | ```fan(fan120x25)``` |  Fan 120mm x 25mm |
+|   1 | ```fan(fan17x8)``` |  Fan 17mm x 8mm |
 |   1 | ```fan(fan25x10)``` |  Fan 25mm x 10mm |
 |   1 | ```fan(fan30x10)``` |  Fan 30mm x 10mm |
 |   1 | ```fan(fan40x11)``` |  Fan 40mm x 11mm |
@@ -639,17 +640,20 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 |   1 | ```fan(fan70x15)``` |  Fan 70mm x 15mm |
 |   1 | ```fan(fan80x25)``` |  Fan 80mm x 25mm |
 |   1 | ```fan(fan80x38)``` |  Fan 80mm x 38mm |
+|   4 | ```nut(M2_nut, nyloc = true)``` |  Nut M2 x 1.6mm nyloc |
 |   4 | ```nut(M2p5_nut, nyloc = true)``` |  Nut M2.5 x 2.2mm nyloc |
 |   8 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
 |  28 | ```nut(M4_nut, nyloc = true)``` |  Nut M4 x 3.2mm nyloc |
+|   4 | ```screw(M2_cap_screw, 16)``` |  Screw M2 cap x 16mm |
 |   4 | ```screw(M2p5_pan_screw, 20)``` |  Screw M2.5 pan x 20mm |
 |   8 | ```screw(M3_dome_screw, 20)``` |  Screw M3 dome x 20mm |
 |  20 | ```screw(M4_dome_screw, 16)``` |  Screw M4 dome x 16mm |
 |   4 | ```screw(M4_dome_screw, 25)``` |  Screw M4 dome x 25mm |
 |   4 | ```screw(M4_dome_screw, 30)``` |  Screw M4 dome x 30mm |
-|   4 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
-|   8 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
-|  28 | ```washer(M4_washer)``` |  Washer  M4 x 9mm x 0.8mm |
+|   8 | ```washer(M2_washer)``` |  Washer  M2 x 5mm x 0.3mm |
+|   8 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
+|  12 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
+|  32 | ```washer(M4_washer)``` |  Washer  M4 x 9mm x 0.8mm |
 
 
 <a href="#top">Top</a>
@@ -683,6 +687,57 @@ Can draw three styles: solid, open frame and open frame with screw bosses.
 |   1 | ```fuseholder(6)``` |  Fuse holder 20mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Geared_steppers"></a>
+## Geared_steppers
+Geared tin can steppers
+
+
+[vitamins/geared_steppers.scad](vitamins/geared_steppers.scad) Object definitions.
+
+[vitamins/geared_stepper.scad](vitamins/geared_stepper.scad) Implementation.
+
+[tests/geared_steppers.scad](tests/geared_steppers.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```gs_boss_d(type)``` | Boss around the shaft diameter |
+| ```gs_boss_h(type)``` | Boss around the shaft height |
+| ```gs_bulge2_d(type)``` | Plastic rear bulge depth from centre |
+| ```gs_bulge2_h(type)``` | Plastic rear bulge height |
+| ```gs_bulge2_w(type)``` | Plastic rear bulge width |
+| ```gs_bulge_d(type)``` | Plastic bulge depth from centre |
+| ```gs_bulge_h(type)``` | Plastic bulge height |
+| ```gs_bulge_w(type)``` | Plastic bulge width |
+| ```gs_diameter(type)``` | Can diameter |
+| ```gs_flat_length(type)``` | Shaft flat length |
+| ```gs_height(type)``` | Can height |
+| ```gs_hole_d(type)``` | Screw hole diameter |
+| ```gs_lug_t(type)``` | Screw lug thickness |
+| ```gs_lug_w(type)``` | Screw lug width |
+| ```gs_offset(type)``` | Offset of the shaft from the centre of the can |
+| ```gs_pitch(type)``` | Screw pitch |
+| ```gs_shaft_d(type)``` | Shaft diameter |
+| ```gs_shaft_flat(type)``` | Shaft width across the flats |
+| ```gs_shaft_length(type)``` | Shaft length |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```geared_stepper(type)``` | Draw the specified geared stepper |
+| ```geared_stepper_screw_positions(type)``` | Place children at the screw positions |
+
+![geared_steppers](tests/png/geared_steppers.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```geared_stepper(28BYJ_48)``` |  Geared stepper - 28BYJ-48 5V |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -774,7 +829,7 @@ Needs updating as mostly obsolete versions.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| ```hot_end(type, filament, naked = false)``` | Draw specified hot end |
+| ```hot_end(type, filament, naked = false, resistor_wire_rotate = [0,0,0])``` | Draw specified hot end |
 
 ![hot_ends](tests/png/hot_ends.png)
 
@@ -793,7 +848,38 @@ Needs updating as mostly obsolete versions.
 |   1 |  |  Tape self amalgamating silicone 110mm x 25mm |
 |   1 | ```resistor(Epcos)``` |  Thermistor Epcos B57560G104F 100K 1% |
 |   2 |  |  Wire Red PTFE 16/0.2mm strands, length 170mm |
-|   4 | ```ziptie(small_ziptie, 8)``` |  Ziptie 100mm min length |
+|   4 | ```ziptie(small_ziptie, 8)``` |  Ziptie 2.5mm x 100mm min length |
+
+
+<a href="#top">Top</a>
+
+---
+<a name="Hygrometer"></a>
+## Hygrometer
+Mini LCD Celsius Digital Thermometer Hygrometer Temperature Humidity Meter Gauge on eBay
+
+
+[vitamins/hygrometer.scad](vitamins/hygrometer.scad) Implementation.
+
+[tests/hygrometer.scad](tests/hygrometer.scad) Code for this example.
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```hygrometer_or()``` | The outside radius of a hygrometer |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```hygrometer()``` | Draw a hygrometer |
+| ```hygrometer_hole(h = 0)``` | Drill the hole for a hygrometer |
+
+![hygrometer](tests/png/hygrometer.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```hygrometer()``` |  Mini LCD Digital Thermometer / Hygrometer |
 
 
 <a href="#top">Top</a>
@@ -889,12 +975,18 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
 | ```insert_ring3_d(type)``` | Diameter of the bottom ring |
 | ```insert_screw_diameter(type)``` | Screw size |
 
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```insert_boss_radius(type, wall)``` | Compute the outer radius of an insert boss |
+
 ### Modules
 | Module | Description |
 |:--- |:--- |
 | ```insert(type)``` | Draw specified insert |
 | ```insert_boss(type, z, wall = 2 * extrusion_width)``` | Make a boss to take an insert |
 | ```insert_hole(type, counterbore = 0, horizontal = false)``` | Make a hole to take an insert, ```counterbore``` is the extra length for the screw |
+| ```insert_lug(insert, wall, counter_bore = 0, extension = 0, corner_r = 0, flying = true)``` | Make a flying insert lug, see [ssr_shroud](#Ssr_shroud) |
 
 ![inserts](tests/png/inserts.png)
 
@@ -945,6 +1037,47 @@ E.g. a "brown" socket for mains live needs to be displayed as "sienna" to look r
 |   1 | ```jack_4mm_shielded("brown", 3, "sienna")``` |  4mm shielded jack socket brown |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Ldrs"></a>
+## Ldrs
+Light dependent resistors.
+
+Larger ones seem to have both a higher dark resistance and a lower bright light resistance.
+
+
+[vitamins/ldrs.scad](vitamins/ldrs.scad) Object definitions.
+
+[vitamins/ldr.scad](vitamins/ldr.scad) Implementation.
+
+[tests/ldrs.scad](tests/ldrs.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```ldr_active(type)``` | The active width |
+| ```ldr_description(type)``` | Description |
+| ```ldr_diameter(type)``` | The diameter of the round bit |
+| ```ldr_lead_d(type)``` | The lead diameter |
+| ```ldr_pitch(type)``` | Pitch between the leads |
+| ```ldr_thickness(type)``` | Thickness |
+| ```ldr_width(type)``` | Across the flats |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```LDR(type, lead_length = 3)``` | Draw an LDR, can specify the lead length |
+
+![ldrs](tests/png/ldrs.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```ldr(large_ldr)``` |  Light dependent resistor - large |
+|   1 | ```ldr(small_ldr)``` |  Light dependent resistor - small |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -1442,6 +1575,34 @@ If a nut is given a child then it gets placed on its top surface.
 |   1 | ```wingnut(M4_wingnut)``` |  Wingnut M4 |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="O_ring"></a>
+## O_ring
+Nitrile rubber O-rings.
+
+Just a black torus specified by internal diameter, ```id``` and ```minor_d``` plus a BOM entry.
+Can be shown stretched by specifying the ```actual_id```.
+
+
+[vitamins/o_ring.scad](vitamins/o_ring.scad) Implementation.
+
+[tests/o_ring.scad](tests/o_ring.scad) Code for this example.
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```O_ring(id, minor_d, actual_id = 0)``` | Draw O-ring with specified internal diameter and minor diameter. ```actual_id``` can be used to stretch it around something. |
+
+![o_ring](tests/png/o_ring.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```O_ring(2.5, 1.6)``` |  O-ring nitrile 2.5mm x 1.6mm |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -1479,34 +1640,6 @@ A permanent magnet that can be magnatized and de-magnatized electronically.
 |   1 | ```opengrab()``` |  OpenGrab V3 electro permanent magnet |
 
 
-<a href="#top">Top</a>
-
----
-<a name="O_ring"></a>
-## O_ring
-Nitrile rubber O-rings.
-
-Just a black torus specified by internal diameter, ```id``` and ```minor_d``` plus a BOM entry.
-Can be shown stretched by specifying the ```actual_id```.
-
-
-[vitamins/o_ring.scad](vitamins/o_ring.scad) Implementation.
-
-[tests/o_ring.scad](tests/o_ring.scad) Code for this example.
-
-### Modules
-| Module | Description |
-|:--- |:--- |
-| ```O_ring(id, minor_d, actual_id = 0)``` | Draw O-ring with specified internal diameter and minor diameter. ```actual_id``` can be used to stretch it around something. |
-
-![o_ring](tests/png/o_ring.png)
-
-### Vitamins
-| Qty | Module call | BOM entry |
-| ---:|:--- |:---|
-|   1 | ```O_ring(2.5, 1.6)``` |  O-ring nitrile 2.5mm x 1.6mm |
-
-
 <a href="#top">Top</a>
 
 ---
@@ -1524,6 +1657,13 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| ```hdmi_depth(type)``` | Front to back depth |
+| ```hdmi_height(type)``` | Outside height above the PCB |
+| ```hdmi_height1(type)``` | Inside height at the sides |
+| ```hdmi_height2(type)``` | Inside height in the middle |
+| ```hdmi_thickness(type)``` | Wall thickness of the metal |
+| ```hdmi_width1(type)``` | Inside width at the top |
+| ```hdmi_width2(type)``` | Inside width at the bottom |
 | ```pcb_accessories(type)``` | List of accessories to go on the BOM, SD cards, USB cables, etc. |
 | ```pcb_colour(type)``` | Colour of the subtrate |
 | ```pcb_components(type)``` | List of components |
@@ -1542,7 +1682,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| ```pcb_component_position(type, name, index = 0)``` | Return x y position of specified component |
 | ```pcb_coord(type, p)``` | Convert offsets from the edge to coordinates relative to the centre |
+| ```pcb_grid_pos(type, x, y, z = 0)``` | Returns a pcb grid position |
 | ```pcb_screw(type, cap = hs_cap)``` | Mounting screw type |
 
 ### Modules
@@ -1550,19 +1692,21 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |:--- |:--- |
 | ```barrel_jack(cutout = false)``` | Draw barrel power jack |
 | ```chip(length, width, thickness, colour, cutout = false)``` | Draw a coloured cube to represent a chip, or other rectangular component |
+| ```flat_flex(cutout = false)``` | Draw flat flexistrip connector as used on RPI0 |
 | ```flex(cutout = false)``` | Draw flexistrip connector |
-| ```hdmi(cutout = false)``` | Draw HDMI socket |
+| ```hdmi(type, cutout = false)``` | Draw HDMI socket |
 | ```jack(cutout = false)``` | Draw 3.5mm jack |
 | ```molex_254(ways)``` | Draw molex header |
 | ```pcb(type)``` | Draw specified PCB |
 | ```pcb_assembly(type, height, thickness)``` | Draw PCB assembly with spaces and fasteners in place |
 | ```pcb_base(type, height, thickness, wall = 2)``` | Generate STL for a base with PCB spacers |
 | ```pcb_component(comp, cutouts = false, angle = undef)``` | Draw pcb component from description |
+| ```pcb_component_position(type, name)``` | Position child at the specified component position |
 | ```pcb_components(type, cutouts = false, angle = undef)``` | Draw list of PCB components on the PCB |
 | ```pcb_cutouts(type, angle = undef)``` | Make cut outs to clear components on a PCB |
-| ```pcb_grid(type, x, y, z = 0)``` | Positions children at specified grid positions |
+| ```pcb_grid(type, x, y, z = 0)``` | Positions children at specified grid position |
 | ```pcb_screw_positions(type)``` | Positions children at the mounting hole positions |
-| ```pcb_spacer(screw, height, wall = 1.8)``` | Generate STL for PCB spacer |
+| ```pcb_spacer(screw, height, wall = 1.8, taper = 0)``` | Generate STL for PCB spacer |
 | ```rj45(cutout = false)``` | Draw RJ45 Ethernet connector |
 | ```terminal_35(ways)``` | Draw 3.5mm terminal block |
 | ```uSD(size, cutout = false)``` | Draw uSD socket |
@@ -1575,20 +1719,22 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
+|   1 | ```pcb(ArduinoLeonardo)``` |  Arduino Leonardo |
 |   1 | ```pcb(ArduinoUno3)``` |  Arduino Uno R3 |
 |   1 |  |  Cat 5 patch cable 300mm |
 |   1 | ```d_plug(DCONN15, pcb = true)``` |  D-type 15 way PCB mount plug |
 |   1 | ```pcb(DuetE)``` |  Duet 2 Ethernet electronics |
 |   1 | ```pcb(Duex2)``` |  Duex2 expansion board |
 |   1 | ```pcb(Duex5)``` |  Duex5 expasnion board |
+|   1 | ```pcb(EnviroPlus)``` |  Enviro+ |
 |   1 | ```pcb(ExtruderPCB)``` |  Extruder connection PCB |
 |   1 | ```pcb(Keyes5p1)``` |  Keyes5.1 Arduino Uno expansion board |
 |   1 | ```pcb(Melzi)``` |  Melzi electronics |
-|   3 |  |  Micro SD card |
+|   4 |  |  Micro SD card |
 |   1 | ```molex_254(2)``` |  Molex KK header 2 way |
 |   1 | ```molex_254(3)``` |  Molex KK header 3 way |
 |  16 | ```nut(M2_nut, nyloc = true)``` |  Nut M2 x 1.6mm nyloc |
-|  12 | ```nut(M2p5_nut, nyloc = true)``` |  Nut M2.5 x 2.2mm nyloc |
+|  28 | ```nut(M2p5_nut, nyloc = true)``` |  Nut M2.5 x 2.2mm nyloc |
 |  12 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
 |  12 | ```nut(M4_nut, nyloc = true)``` |  Nut M4 x 3.2mm nyloc |
 |   1 | ```pcb(PI_IO)``` |  PI_IO V2 |
@@ -1600,38 +1746,46 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | ```pcb(PERF80x20)``` |  Perfboard 80 x 20mm |
 |   1 | ```pin_socket(2p54header, 13, 2, right_angle = true)``` |  Pin socket 13 x 2 right_angle |
 |   1 | ```pcb(RPI3)``` |  Raspberry Pi 3 |
-|  12 | ```screw(M2_cap_screw, 20)``` |  Screw M2 cap x 20mm |
-|   4 | ```screw(M2_cap_screw, 25)``` |  Screw M2 cap x 25mm |
+|   1 | ```pcb(RPI0)``` |  Raspberry Pi Zero |
+|  16 | ```screw(M2_cap_screw, 25)``` |  Screw M2 cap x 25mm |
 |   4 | ```screw(M2p5_cap_screw, 16)``` |  Screw M2.5 cap x 16mm |
+|   8 | ```screw(M2p5_cap_screw, 20)``` |  Screw M2.5 cap x 20mm |
 |   8 | ```screw(M2p5_pan_screw, 20)``` |  Screw M2.5 pan x 20mm |
-|   8 | ```screw(M3_cap_screw, 25)``` |  Screw M3 cap x 25mm |
-|   4 | ```screw(M3_cap_screw, 30)``` |  Screw M3 cap x 30mm |
-|  12 | ```screw(M4_cap_screw, 30)``` |  Screw M4 cap x 30mm |
+|   4 | ```screw(M2p5_pan_screw, 25)``` |  Screw M2.5 pan x 25mm |
+|   4 | ```screw(M2p5_pan_screw, 35)``` |  Screw M2.5 pan x 35mm |
+|   8 | ```screw(M3_cap_screw, 30)``` |  Screw M3 cap x 30mm |
+|   4 | ```screw(M3_cap_screw, 35)``` |  Screw M3 cap x 35mm |
+|   4 | ```screw(M4_cap_screw, 30)``` |  Screw M4 cap x 30mm |
+|   8 | ```screw(M4_cap_screw, 35)``` |  Screw M4 cap x 35mm |
 |   3 | ```terminal_35(2)``` |  Terminal block 2 way 3.5mm |
 |   2 | ```green_terminal(gt_2p54, 4)``` |  Terminal block 4 way 0.1" |
 |   1 |  |  USB A to Mini B lead |
 |  16 | ```washer(M2_washer)``` |  Washer  M2 x 5mm x 0.3mm |
-|  12 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
+|  28 | ```washer(M2p5_washer)``` |  Washer  M2.5 x 5.9mm x 0.5mm |
 |  12 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
 |  12 | ```washer(M4_washer)``` |  Washer  M4 x 9mm x 0.8mm |
+|   1 | ```pcb(ZC_A0591)``` |  ZC-A0591 ULN2003 driver PCB |
 
 ### Printed
 | Qty | Filename |
 | ---:|:--- |
-|   4 | pcb_spacer20100.stl |
-|   4 | pcb_spacer20110.stl |
-|   4 | pcb_spacer20120.stl |
 |   4 | pcb_spacer20130.stl |
-|   4 | pcb_spacer2560.stl |
-|   8 | pcb_spacer2570.stl |
+|   4 | pcb_spacer20140.stl |
+|   4 | pcb_spacer20150.stl |
+|   4 | pcb_spacer20160.stl |
+|   4 | pcb_spacer25100_2.stl |
+|   4 | pcb_spacer25110_2.stl |
+|   4 | pcb_spacer25120_2.stl |
+|   4 | pcb_spacer25230.stl |
+|   4 | pcb_spacer2570.stl |
 |   4 | pcb_spacer2580.stl |
 |   4 | pcb_spacer2590.stl |
-|   4 | pcb_spacer30140.stl |
-|   4 | pcb_spacer30150.stl |
-|   4 | pcb_spacer30190.stl |
-|   4 | pcb_spacer40160.stl |
-|   4 | pcb_spacer40170.stl |
-|   4 | pcb_spacer40180.stl |
+|   4 | pcb_spacer30170.stl |
+|   4 | pcb_spacer30180.stl |
+|   4 | pcb_spacer30220.stl |
+|   4 | pcb_spacer40190.stl |
+|   4 | pcb_spacer40200.stl |
+|   4 | pcb_spacer40210.stl |
 
 
 <a href="#top">Top</a>
@@ -1713,17 +1867,18 @@ Pin headers and sockets, etc.
 | ```box_header(type, cols = 1, rows = 1, smt = false, cutout = false)``` | Draw box header |
 | ```idc_transition(type, cols = 5, skip = [], cutout = false)``` | Draw IDC transition header |
 | ```pin(type, length = undef)``` | Draw a header pin |
-| ```pin_header(type, cols = 1, rows = 1, smt = false, cutout = false)``` | Draw pin header |
-| ```pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, cutout = false)``` | Draw pin socket |
+| ```pin_header(type, cols = 1, rows = 1, smt = false, right_angle = false, cutout = false)``` | Draw pin header |
+| ```pin_socket(type, cols = 1, rows = 1, right_angle = false, height = 0, smt = false, cutout = false)``` | Draw pin socket |
 
 ![pin_headers](tests/png/pin_headers.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
+|   1 | ```box_header(2p54header, 10, 2)``` |  Box header 10 x 2 |
 |   1 | ```idc_transition(2p54header, 10)``` |  IDC transition header 10 x 2 |
-|   1 | ```pin_header(2p54header102)``` |  Pin header 10 x 2 |
-|   1 | ```box_header(2p54header102)``` |  Pin header 10 x 2 |
+|   1 | ```pin_header(2p54header, 10, 2)``` |  Pin header 10 x 2 |
+|   1 | ```pin_header(2p54header, 10, 2, right_angle = true)``` |  Pin header 10 x 2 right_angle |
 |   1 | ```pin_socket(2p54header, 10, 2)``` |  Pin socket 10 x 2 |
 |   1 | ```pin_socket(2p54header, 10, 2, right_angle = true)``` |  Pin socket 10 x 2 right_angle |
 
@@ -1969,6 +2124,7 @@ Ring terminals and earth assemblies for DiBond panels.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| ```ringterm_crimp_length(type)``` | If non-zero the length of the crimp tube |
 | ```ringterm_hole(type)``` | Wire hole diameter |
 | ```ringterm_id(type)``` | Inside diameter |
 | ```ringterm_length(type)``` | Length of the tail including the ring |
@@ -1994,10 +2150,13 @@ Ring terminals and earth assemblies for DiBond panels.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
+|   3 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
 |   1 | ```ring_terminal(M3_ringterm)``` |  Ring terminal 3mm |
-|   1 | ```screw(M3_dome_screw, 10)``` |  Screw M3 dome x 10mm |
-|   2 | ```star_washer(M3_washer)``` |  Washer star M3 x 0.5mm |
+|   1 | ```ring_terminal(M3_ringterm_cs)``` |  Ring terminal 3mm |
+|   1 | ```ring_terminal(M3_ringterm_crimp)``` |  Ring terminal crimp 3mm |
+|   1 | ```screw(M3_cap_screw, 10)``` |  Screw M3 cap x 10mm |
+|   2 | ```screw(M3_dome_screw, 10)``` |  Screw M3 dome x 10mm |
+|   6 | ```star_washer(M3_washer)``` |  Washer star M3 x 0.5mm |
 
 
 <a href="#top">Top</a>
@@ -2051,13 +2210,19 @@ Rocket switch. Also used for neon indicator in the same form factor.
 ---
 <a name="Rod"></a>
 ## Rod
-Steel rods, with optional chamfer.
+Steel rods and studding with chamfered ends.
 
 
 [vitamins/rod.scad](vitamins/rod.scad) Implementation.
 
 [tests/rod.scad](tests/rod.scad) Code for this example.
 
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```rod(d , l)``` | Draw a smooth rod with specified length and diameter |
+| ```studding(d , l)``` | Draw a threaded rod with specified length and diameter |
+
 ![rod](tests/png/rod.png)
 
 ### Vitamins
@@ -2070,6 +2235,13 @@ Steel rods, with optional chamfer.
 |   1 | ```rod(5, 80)``` |  Smooth rod 5mm x 80mm |
 |   1 | ```rod(6, 80)``` |  Smooth rod 6mm x 80mm |
 |   1 | ```rod(8, 80)``` |  Smooth rod 8mm x 80mm |
+|   1 | ```studding(10, 80)``` |  Threaded rod M10 x 80mm |
+|   1 | ```studding(12, 80)``` |  Threaded rod M12 x 80mm |
+|   1 | ```studding(3, 80)``` |  Threaded rod M3 x 80mm |
+|   1 | ```studding(4, 80)``` |  Threaded rod M4 x 80mm |
+|   1 | ```studding(5, 80)``` |  Threaded rod M5 x 80mm |
+|   1 | ```studding(6, 80)``` |  Threaded rod M6 x 80mm |
+|   1 | ```studding(8, 80)``` |  Threaded rod M8 x 80mm |
 
 
 <a href="#top">Top</a>
@@ -2215,7 +2387,7 @@ Note that modules that drill holes will return a 2D object if ```h``` is set to
 |:--- |:--- |
 | ```render_2D_sheet(type, color = false)``` | Extrude a 2D sheet template and give it the correct colour |
 | ```render_sheet(type, color = false)``` | Render a sheet in the correct colour after holes have been subtracted |
-| ```sheet(type, w, d, corners = [0, 0, 0, 0])``` | Draw speified sheet |
+| ```sheet(type, w, d, corners = [0, 0, 0, 0])``` | Draw specified sheet |
 | ```sheet_2D(type, w, d, corners = [0, 0, 0, 0])``` | 2D sheet template with specified size and optionally rounded corners |
 
 ![sheets](tests/png/sheets.png)
@@ -2235,6 +2407,7 @@ Note that modules that drill holes will return a 2D object if ```h``` is set to
 |   1 | ```sheet(MDF19, 30, 30, 2)``` |  Sheet MDF 30mm x 30mm x 19mm |
 |   1 | ```sheet(MDF6, 30, 30, 2)``` |  Sheet MDF 30mm x 30mm x 6mm |
 |   1 | ```sheet(PMMA10, 30, 30, 2)``` |  Sheet acrylic 30mm x 30mm x 10mm |
+|   1 | ```sheet(PMMA2, 30, 30, 2)``` |  Sheet acrylic 30mm x 30mm x 2mm |
 |   1 | ```sheet(PMMA3, 30, 30, 2)``` |  Sheet acrylic 30mm x 30mm x 3mm |
 |   1 | ```sheet(PMMA6, 30, 30, 2)``` |  Sheet acrylic 30mm x 30mm x 6mm |
 |   1 | ```sheet(PMMA8, 30, 30, 2)``` |  Sheet acrylic 30mm x 30mm x 8mm |
@@ -2303,6 +2476,7 @@ Filament spool models
 | Function | Description |
 |:--- |:--- |
 | ```spool_height(type)``` | Outside width |
+| ```spool_pitch(type)``` | Spacing of the rims |
 
 ### Modules
 | Module | Description |
@@ -2315,7 +2489,9 @@ Filament spool models
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | ```spool(spool_200x55)``` |  Filament spool 200 x 55 |
+|   1 | ```spool(spool_200x60)``` |  Filament spool 200 x 60 |
 |   1 | ```spool(spool_300x85)``` |  Filament spool 300 x 85 |
+|   1 | ```spool(spool_300x88)``` |  Filament spool 300 x 88 |
 
 
 <a href="#top">Top</a>
@@ -2527,7 +2703,7 @@ Toggle switches
 | ---:|:--- |:---|
 |   1 | ```toggle(AP5236, 3)``` |  Toggle switch AP5236 |
 |   1 | ```toggle(CK7101, 3)``` |  Toggle switch CK7101 |
-|   1 | ```toggle(CK7105, 3)``` |  Toggle switch CK7101 |
+|   1 | ```toggle(CK7105, 3)``` |  Toggle switch CK7105 |
 |   1 | ```toggle(MS332F, 3)``` |  Toggle switch MS332F |
 
 
@@ -2869,7 +3045,7 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 |:--- |:--- |
 | ```cable_tie(cable_r, thickness)``` | A ziptie threaded around cable radius ```cable_r``` and through a panel with specified ```thickness```. |
 | ```cable_tie_holes(cable_r, h = 100)``` | Holes to thread a ziptie through a panel to make a cable tie. |
-| ```mouse_hole(cable, h = 100)``` | A mouse hole to allow a panel to go over a wire bundle. |
+| ```mouse_hole(cable, h = 100, teardrop = false)``` | A mouse hole to allow a panel to go over a wire bundle. |
 | ```ribbon_cable(ways, length)``` | Add ribbon cable to the BOM |
 | ```wire(color, strands, length, strand = 0.2)``` | Add stranded wire to the BOM |
 
@@ -2885,7 +3061,7 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 |   1 |  |  Wire orange 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire red 7/0.2mm strands, length 90mm |
 |   1 |  |  Wire yellow 7/0.2mm strands, length 90mm |
-|   1 | ```ziptie(small_ziptie, 2.1)``` |  Ziptie 100mm min length |
+|   1 | ```ziptie(small_ziptie, 2.1)``` |  Ziptie 2.5mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -2921,9 +3097,9 @@ Cable zipties.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | ```ziptie(small_ziptie, 5)``` |  Ziptie 100mm min length |
-|   1 | ```ziptie(ziptie_3mm, 5)``` |  Ziptie 100mm min length |
-|   1 | ```ziptie(ziptie_3p6mm, 5)``` |  Ziptie 100mm min length |
+|   1 | ```ziptie(small_ziptie, 5)``` |  Ziptie 2.5mm x 100mm min length |
+|   1 | ```ziptie(ziptie_3p6mm, 5)``` |  Ziptie 3.6mm x 100mm min length |
+|   1 | ```ziptie(ziptie_3mm, 5)``` |  Ziptie 3mm x 100mm min length |
 
 
 <a href="#top">Top</a>
@@ -3047,6 +3223,10 @@ and mounted components.
 A list specifies the internal dimensions, screw type, top, bottom and side sheet types and the block
 maximum spacing.
 
+ * An optional name can be specified to allow more then one box in a project.
+ * An optional list of fixing blocks to be omitted can be given.
+ * Star washers can be omitted by setting the 11th parameter to false.
+
 Uses [fixing blocks](#fixing_block) and [corner blocks](#corner_block).
 
 
@@ -3060,26 +3240,35 @@ Uses [fixing blocks](#fixing_block) and [corner blocks](#corner_block).
 | ```bbox_base_sheet(type)``` | Sheet type for the base |
 | ```bbox_depth(type)``` | Internal depth |
 | ```bbox_height(type)``` | Internal height |
+| ```bbox_name(type)``` | Optional name if there is more than one box in a project |
 | ```bbox_screw(type)``` | Screw type for corner blocks |
 | ```bbox_sheets(type)``` | Sheet type for the sides |
+| ```bbox_skip_blocks(type)``` | List of fixing blocks to skip, used to allow a hinged panel for example |
 | ```bbox_span(type)``` | Maximum span between fixing blocks |
 | ```bbox_top_sheet(type)``` | Sheet type for the top |
 | ```bbox_width(type)``` | Internal width |
+| ```star_washers(type)``` | Set to false to remove star washers. |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```bbox_area(type)``` | Internal surdface area in m^2 |
+| ```bbox_volume(type)``` | Internal volume in litres |
 
 ### Modules
 | Module | Description |
 |:--- |:--- |
 | ```_bbox_assembly(type, top = true, base = true, left = true, right = true, back = true, front = true)``` | The box assembly, wrap with a local copy without parameters |
 | ```bbox_back(type)``` | Default back, can be overridden to customise |
-| ```bbox_back_blank(type)``` | 2D template for the back |
+| ```bbox_back_blank(type, sheet = false)``` | 2D template for the back |
 | ```bbox_base(type)``` | Default base, can be overridden to customise |
 | ```bbox_base_blank(type)``` | 2D template for the base |
 | ```bbox_front(type)``` | Default front, can be overridden to customise |
-| ```bbox_front_blank(type)``` | 2D template for the front |
+| ```bbox_front_blank(type, sheet = false, width = 0)``` | 2D template for the front |
 | ```bbox_left(type)``` | Default left side, can be overridden to customise |
-| ```bbox_left_blank(type)``` | 2D template for the left side |
+| ```bbox_left_blank(type, sheet = false)``` | 2D template for the left side |
 | ```bbox_right(type)``` | Default right side, can be overridden to customise |
-| ```bbox_right_blank(type)``` | 2D template for the right side |
+| ```bbox_right_blank(type, sheet = false)``` | 2D template for the right side |
 | ```bbox_shelf_blank(type)``` | 2D template for a shelf |
 | ```bbox_top(type)``` | Default top, can be overridden to customise |
 | ```bbox_top_blank(type)``` | 2D template for the top |
@@ -3197,6 +3386,11 @@ See [butt_box](#Butt_box) for an example of usage.
 
 Note that the block with its inserts is defined as a sub assembly, but its fasteners get added to the parent assembly.
 
+Specific fasteners can be omitted by setting a side's thickness to 0 and the block omitted by setting ```show_block``` to false.
+This allows the block and one set of fasteners to be on one assembly and the other fasteners on the mating assemblies.
+
+Star washers can be omitted by setting ```star_washers``` to false.
+
 
 [printed/corner_block.scad](printed/corner_block.scad) Implementation.
 
@@ -3217,10 +3411,10 @@ Note that the block with its inserts is defined as a sub assembly, but its faste
 |:--- |:--- |
 | ```corner_block(screw = def_screw, name = false)``` | Generate the STL for a printed corner block |
 | ```corner_block_assembly(screw = def_screw, name = false)``` | The printed block with inserts |
-| ```corner_block_h_holes(screw = def_screw)``` | Place children at the side screw holes |
+| ```corner_block_h_holes(screw = def_screw, index = undef)``` | Place children at the side screw holes |
 | ```corner_block_holes(screw = def_screw)``` | Place children at all the holes |
 | ```corner_block_v_hole(screw = def_screw)``` | Place children at the bottom screw hole |
-| ```fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, name = false)``` | Printed block with all fasteners |
+| ```fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, thickness_side2 = undef, name = false, show_block = true, star_washers = true)``` | Printed block with all fasteners |
 
 ![corner_block](tests/png/corner_block.png)
 
@@ -3388,6 +3582,7 @@ The ring spacing as well as the number of spokes can be specified, if zero a gas
 | Qty | Filename |
 | ---:|:--- |
 |   1 | fan_guard_120.stl |
+|   1 | fan_guard_17.stl |
 |   1 | fan_guard_25.stl |
 |   1 | fan_guard_30.stl |
 |   1 | fan_guard_40.stl |
@@ -3409,6 +3604,11 @@ See [butt_box](#Butt_box) for an example of usage.
 
 Note that the block with its inserts is defined as a sub assembly, but its fasteners get added to the parent assembly.
 
+Specific fasteners can be omitted by setting a side's thickness to 0 and the block omitted by setting ```show_block``` to false.
+This allows the block and one set of fasteners to be on one assembly and the other fasteners on the mating assemblies.
+
+Star washers can be omitted by setting ```star_washers``` to false.
+
 
 [printed/fixing_block.scad](printed/fixing_block.scad) Implementation.
 
@@ -3428,7 +3628,7 @@ Note that the block with its inserts is defined as a sub assembly, but its faste
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| ```fastened_fixing_block_assembly(thickness, screw = def_screw, screw2 = undef, thickness2 = undef)``` | Assembly with fasteners in place |
+| ```fastened_fixing_block_assembly(thickness, screw = def_screw, screw2 = undef, thickness2 = undef, show_block = true, star_washers = true)``` | Assembly with fasteners in place |
 | ```fixing_block(screw = def_screw)``` | Generate the STL |
 | ```fixing_block_assembly(screw = def_screw)``` | Printed part with the inserts inserted |
 | ```fixing_block_h_hole(screw = def_screw)``` | Position children on the horizontal hole |
@@ -3578,7 +3778,7 @@ inserts don't grip well in rubber.
 |:--- |:--- |
 | ```fastened_insert_foot_assembly(t = 3, type = insert_foot)``` | Assembly with fasteners in place for specified sheet thickness |
 | ```foot(type = foot)``` | Generate STL |
-| ```foot_assembly(t = 0, type = foot)``` | Assembly with fasteners in place for specified sheet thickness |
+| ```foot_assembly(t = 0, type = foot, flip = false)``` | Assembly with fasteners in place for specified sheet thickness |
 | ```insert_foot(type = insert_foot)``` | Generate STL for foot with insert |
 | ```insert_foot_assembly(type = insert_foot)``` | Printed part with insert in place |
 
@@ -3657,6 +3857,54 @@ Printed handle that can be printed without needing support material due to its t
 |   1 | handle_assembly |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Pcb_mount"></a>
+## Pcb_mount
+A frame to mount a PCB by its corners when it has no mounting holes.
+The stl must be given a parameterless wrapper in the project that uses it.
+
+
+[printed/pcb_mount.scad](printed/pcb_mount.scad) Implementation.
+
+[tests/pcb_mount.scad](tests/pcb_mount.scad) Code for this example.
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```pcb_mount_length(pcb)``` | Outside length of the mount |
+| ```pcb_mount_width(pcb)``` | Outside width of the mount |
+| ```pillar_x_pitch(pcb)``` | x pitch of screw pillars |
+| ```pillar_y_pitch(pcb)``` | y pitch of screw pillars |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```pcb_mount(pcb, height = 5, washers = true)``` | Make the STL of a pcb mount for the specified PCB. |
+| ```pcb_mount_assembly(pcb, thickness, height = 5)``` | A PCB mount assembly with fasteners |
+| ```pcb_mount_holes(pcb, h = 0)``` | Drill holes for PCB mount |
+| ```pcb_mount_screw_positions(pcb)``` | Positions of the screws and pillars |
+| ```pcb_mount_washer_stl()``` | A plastic washer to clamp a PCB |
+
+![pcb_mount](tests/png/pcb_mount.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   4 | ```nut(M3_nut, nyloc = true)``` |  Nut M3 x 2.4mm nyloc |
+|   1 | ```pcb(PI_IO)``` |  PI_IO V2 |
+|   1 | ```pin_socket(2p54header, 13, 2)``` |  Pin socket 13 x 2 |
+|   4 | ```screw(M3_cap_screw, 16)``` |  Screw M3 cap x 16mm |
+|   3 | ```terminal_35(2)``` |  Terminal block 2 way 3.5mm |
+|   4 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
+
+### Printed
+| Qty | Filename |
+| ---:|:--- |
+|   1 | pcb_mount_PI_IO_5.stl |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -3700,7 +3948,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 |   4 | ```screw(M3_cap_screw, 10)``` |  Screw M3 cap x 10mm |
 |   4 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
 |   4 | ```star_washer(M3_washer)``` |  Washer star M3 x 0.5mm |
-|   2 | ```ziptie(small_ziptie, 3)``` |  Ziptie 100mm min length |
+|   2 | ```ziptie(small_ziptie, 3)``` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |
@@ -3897,7 +4145,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 |   4 | ```screw(M3_cap_screw, 10)``` |  Screw M3 cap x 10mm |
 |   4 | ```washer(M3_washer)``` |  Washer  M3 x 7mm x 0.5mm |
 |   4 | ```star_washer(M3_washer)``` |  Washer star M3 x 0.5mm |
-|   4 | ```ziptie(small_ziptie, 3)``` |  Ziptie 100mm min length |
+|   4 | ```ziptie(small_ziptie, 3)``` |  Ziptie 2.5mm x 100mm min length |
 
 ### Printed
 | Qty | Filename |
@@ -4110,7 +4358,7 @@ Layout objects in a line with equal gaps given a vector of their widths.
 ---
 <a name="Maths"></a>
 ## Maths
-Maths utilities for minapulating vectors and matrices.
+Maths utilities for manipulating vectors and matrices.
 
 
 [utils/maths.scad](utils/maths.scad) Implementation.
@@ -4366,6 +4614,8 @@ heirachical BOMs are also generated for real projects.
 | ```no_pose()``` | Force children not to be posed even if parent is |
 | ```not_on_bom(on = false)``` | Specify the following child parts are not on the BOM, for example when they are on a PCB that comes assembled |
 | ```pose(a = [55, 0, 25], t = [0, 0, 0], exploded = undef)``` | Pose an STL or assembly for rendering to png by specifying rotation ```a``` and translation ```t```, ```exploded = true for``` just the exploded view or ```false``` for unexploded only. |
+| ```pose_hflip(exploded = undef)``` | Pose an STL or assembly for rendering to png by flipping around the Y axis, ```exploded = true for``` just the exploded view or ```false``` for unexploded only. |
+| ```pose_vflip(exploded = undef)``` | Pose an STL or assembly for rendering to png by flipping around the X axis, ```exploded = true for``` just the exploded view or ```false``` for unexploded only. |
 | ```stl(name)``` | Name an stl that will appear on the BOM, there needs to a module named ```<name>_stl``` to make it |
 | ```vitamin(description)``` | Describe a vitamin for the BOM entry and precede it with a module call that creates it, eg. "wigit(42): Type 42 widget" |
 
@@ -4457,6 +4707,7 @@ Global constants, functions and modules. This file is used directly or indirectl
 | ```ellipse(xr, yr)``` | Draw an ellipse |
 | ```extrude_if(h, center = true)``` | Extrudes 2D object to 3D when ```h``` is nonzero, otherwise leaves it 2D |
 | ```hflip()``` | Invert children by doing a 180&deg; flip around the Y axis |
+| ```right_triangle(width, height, h, center = true)``` | A right angled triangle with the 90&deg; corner at the origin. 3D when ```h``` is nonzero, otherwise 2D |
 | ```semi_circle(r, d = undef)``` | A semi circle in the positive Y domain |
 | ```translate_z(z)``` | Shortcut for Z only translations |
 | ```vflip()``` | Invert children by doing a 180&deg; flip around the X axis |
@@ -4493,6 +4744,7 @@ The module provides `poly_circle()`, `poly_cylinder()` and `poly_ring()` that is
 | ```poly_circle(r, sides = 0)``` | Make a circle adjusted to print the correct size |
 | ```poly_cylinder(r, h, center = false, sides = 0)``` | Make a cylinder adjusted to print the correct size |
 | ```poly_ring(or, ir)``` | Make a 2D ring adjusted to have the correct internal radius |
+| ```poly_tube(or, ir, h, center = false)``` | Make a tube adjusted to have the correct internal radius |
 | ```slot(r, l, h = 100)``` | Make a horizontal slot suitable for CNC routing, set h = 0 for 2D version |
 
 ![polyholes](tests/png/polyholes.png)
@@ -4582,6 +4834,7 @@ Small holes can get away without it, but they print better with truncated teardr
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| ```semi_teardrop(h, r, d = undef, center = true)``` | A semi teardrop in the positive Y domain |
 | ```teardrop(h, r, center = true, truncate = true)``` | For making horizontal holes that don't need support material, set ```truncate = false``` to make traditional RepRap teardrops that don't even need bridging |
 | ```teardrop_plus(h, r, center = true, truncate = true)``` | Slightly bigger teardrop to allow for the 3D printing staircase effect |
 | ```tearslot(h, r, w, center = true)``` | A horizontal slot that doesn't need support material |

scripts/deps.py

@@ -37,9 +37,10 @@ def read_deps(dname):
                 deps.append(dep)
     return deps
 
-def check_deps(target_mtime, dname):
+def check_deps(target, dname):
+    target_mtime = mtime(target)
     if not target_mtime:
-        return "target missing"
+        return target + " missing"
     if not os.path.isfile(dname):
         return "no deps"
     deps = read_deps(dname)

scripts/exports.py

@@ -84,7 +84,6 @@ def make_parts(target, part_type, parts = None):
     # Find all the scad files
     #
     lib_dir = os.environ['OPENSCADPATH'] + '/NopSCADlib/printed'
-    used = []
     module_suffix = '_dxf' if part_type == 'svg' else '_' + part_type
     for dir in [source_dir, lib_dir]:
         for filename in os.listdir(dir):
@@ -113,7 +112,7 @@ def make_parts(target, part_type, parts = None):
                                     #
                                     part_file = target_dir + "/" + part
                                     dname = deps_name(deps_dir, filename)
-                                    changed = check_deps(mtime(part_file), dname)
+                                    changed = check_deps(part_file, dname)
                                     changed = times.check_have_time(changed, part)
                                     if part_type == 'stl' and not changed and not part in bounds_map:
                                         changed = "No bounds"
@@ -125,14 +124,9 @@ def make_parts(target, part_type, parts = None):
                                         if part_type == 'stl':
                                             bounds = c14n_stl.canonicalise(part_file)
                                             bounds_map[part] = bounds
+
                                     targets.remove(part)
                                     os.remove(part_maker_name)
-                                    #
-                                    # Add the files on the BOM to the used list for plates.py
-                                    #
-                                    for line in open("openscad.log"):
-                                        if line[:7] == 'ECHO: "' and line[-6:] == '.' + part_type + '"\n':
-                                            used.append(line[7:-2])
     #
     # Write new bounds file
     #
@@ -150,4 +144,3 @@ def make_parts(target, part_type, parts = None):
                 print("Could not find a module called", part[:-4] + module_suffix, "to make", part)
         sys.exit(1)
     times.print_times()
-    return used

scripts/make_all.py

@@ -26,6 +26,7 @@ from exports import make_parts
 from bom import boms
 from render import render
 from views import views
+from plateup import plateup
 
 if __name__ == '__main__':
     target = None if len(sys.argv) == 1 else sys.argv[1]
@@ -33,4 +34,6 @@ if __name__ == '__main__':
     for part in ['stl', 'dxf']:
         make_parts(target, part)
         render(target, part)
+        plateup(target, part)
+
     views(target)

scripts/openscad.py

@@ -24,11 +24,12 @@ from __future__ import print_function
 
 import subprocess, sys
 
-def run(*args):
-    cmd = ["openscad"] + list(args)
-    for arg in cmd:
-        print(arg, end=" ")
-    print()
+def _run(args, silent):
+    cmd = ["openscad"] + args
+    if not silent:
+        for arg in cmd:
+            print(arg, end=" ")
+        print()
     with open("openscad.log", "w") as log:
         rc = subprocess.call(cmd, stdout = log, stderr = log)
     for line in open("openscad.log", "rt"):
@@ -36,3 +37,9 @@ def run(*args):
             print(line[:-1])
     if rc:
         sys.exit(rc)
+
+def run(*args):
+    _run(list(args), False)
+
+def run_silent(*args):
+    _run(list(args), True);

scripts/panels.py

@@ -0,0 +1,33 @@
+#!/usr/bin/env python
+
+#
+# NopSCADlib Copyright Chris Palmer 2018
+# nop.head@gmail.com
+# hydraraptor.blogspot.com
+#
+# This file is part of NopSCADlib.
+#
+# NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+# GNU General Public License as published by the Free Software Foundation, either version 3 of
+# the License, or (at your option) any later version.
+#
+# NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+# without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with NopSCADlib.
+# If not, see <https://www.gnu.org/licenses/>.
+#
+#! Panelises DXF files so they can be routed together by running scad files found in the ```panels``` directory.
+
+from __future__ import print_function
+import sys
+
+from plateup import plateup
+
+if __name__ == '__main__':
+    if len(sys.argv) > 1:
+        target = sys.argv[1]
+    else:
+        target = None
+    plateup(target, 'dxf')

scripts/plateup.py

@@ -0,0 +1,98 @@
+#!/usr/bin/env python
+
+#
+# NopSCADlib Copyright Chris Palmer 2018
+# nop.head@gmail.com
+# hydraraptor.blogspot.com
+#
+# This file is part of NopSCADlib.
+#
+# NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+# GNU General Public License as published by the Free Software Foundation, either version 3 of
+# the License, or (at your option) any later version.
+#
+# NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+# without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with NopSCADlib.
+# If not, see <https://www.gnu.org/licenses/>.
+#
+
+from __future__ import print_function
+import os
+import openscad
+import sys
+import c14n_stl
+from set_config import *
+from deps import *
+from shutil import copyfile
+
+source_dirs = { "stl" : "platters", "dxf" : "panels" }
+target_dirs = { "stl" : "printed",  "dxf" : "routed" }
+
+def plateup(target, part_type):
+    #
+    # Make the target directory
+    #
+    top_dir = set_config(target)
+    parts_dir = top_dir + part_type + 's'
+    target_dir = parts_dir + '/' + target_dirs[part_type]
+    source_dir = top_dir + source_dirs[part_type]
+    deps_dir = source_dir + "/deps"
+    if not os.path.isdir(source_dir):
+        return
+    if not os.path.isdir(target_dir):
+        os.makedirs(target_dir)
+    if not os.path.isdir(deps_dir):
+        os.makedirs(deps_dir)
+    #
+    # Decide which files to make
+    #
+    sources = [file for file in os.listdir(source_dir) if file.endswith('.scad')]
+    #
+    # Run OpenSCAD on the source files to make the targets
+    #
+    used = []
+    for src in sources:
+        src_file = source_dir + '/' + src
+        part_file = target_dir + '/' + src[:-4] + part_type
+        dname = deps_name(deps_dir, src)
+        changed = check_deps(part_file, dname)
+        if changed:
+            print(changed)
+            openscad.run("-D$bom=1", "-d", dname, "-o", part_file, src_file)
+            if part_type == 'stl':
+                c14n_stl.canonicalise(part_file)
+            log_name = 'openscad.log'
+        else:
+            log_name = 'openscad.echo'
+            openscad.run_silent("-D$bom=1", "-o", log_name, src_file)
+        #
+        # Add the files on the BOM to the used list
+        #
+        with open(log_name) as file:
+            for line in file.readlines():
+                if line.startswith('ECHO: "~') and line.endswith('.' + part_type + '"\n'):
+                    used.append(line[8:-2])
+    #
+    # Copy file that are not included
+    #
+    copied = []
+    for file in os.listdir(parts_dir):
+        if file.endswith('.' + part_type) and not file in used:
+            src = parts_dir + '/' + file
+            dst = target_dir + '/' + file
+            if mtime(src) > mtime(dst):
+                print("Copying %s to %s" % (src, dst))
+                copyfile(src, dst)
+            copied.append(file)
+    #
+    # Remove any cruft
+    #
+    targets = [file[:-4] + part_type for file in sources]
+    for file in os.listdir(target_dir):
+        if file.endswith('.' + part_type):
+            if not file in targets and not file in copied:
+                print("Removing %s" % file)
+                os.remove(target_dir + '/' + file)

scripts/platters.py

@@ -0,0 +1,33 @@
+#!/usr/bin/env python
+
+#
+# NopSCADlib Copyright Chris Palmer 2018
+# nop.head@gmail.com
+# hydraraptor.blogspot.com
+#
+# This file is part of NopSCADlib.
+#
+# NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+# GNU General Public License as published by the Free Software Foundation, either version 3 of
+# the License, or (at your option) any later version.
+#
+# NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+# without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+# See the GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License along with NopSCADlib.
+# If not, see <https://www.gnu.org/licenses/>.
+#
+#! Generates build plates of STL files for efficient printing by running scad files found in the ```platters``` directory.
+
+from __future__ import print_function
+import sys
+
+from plateup import plateup
+
+if __name__ == '__main__':
+    if len(sys.argv) > 1:
+        target = sys.argv[1]
+    else:
+        target = None
+    plateup(target, 'stl')

scripts/readme.md

@@ -12,6 +12,8 @@ They should work with both Python 2 and Python 3.
 | ```dxfs.py``` | Generates DXF files for all the routed parts listed on the BOM or a specified list. |
 | ```gallery.py``` | Finds projects and adds them to the gallery. |
 | ```make_all.py``` | Generates all the files for a project by running ```bom.py```, ```stls.py```, ```dxfs.py```, ```render.py``` and ```views.py```. |
+| ```panels.py``` | Panelises DXF files so they can be routed together by running scad files found in the ```panels``` directory. |
+| ```platters.py``` | Generates build plates of STL files for efficient printing by running scad files found in the ```platters``` directory. |
 | ```render.py``` | Renders STL and DXF files to PNG for inclusion in the build instructions. |
 | ```set_config.py``` | Sets the target configuration for multi-target projects that have variable configurations. |
 | ```stls.py``` | Generates STL files for all the printed parts listed on the BOM or a specified list. |

scripts/tests.py

@@ -107,7 +107,7 @@ def tests(tests):
     #
     # List of individual part files
     #
-    scads = [i for i in os.listdir(scad_dir) if i[-5:] == ".scad"]
+    scads = [i for i in sorted(os.listdir(scad_dir)) if i[-5:] == ".scad"]
 
     for scad in scads:
         base_name = scad[:-5]
@@ -138,7 +138,7 @@ def tests(tests):
                 print("Can't find implementation!")
                 continue
 
-            vsplit = "N"
+            vsplit = "M"
             vtype = locations[0][1]
             types = [vtype + ' A-' + vsplit[0], vtype + ' ' + chr(ord(vsplit) + 1) + '-Z'] + [loc[1] for loc in locations[1 :]]
             if type == vtype:
@@ -187,7 +187,7 @@ def tests(tests):
             body += ["![%s](%s)\n" %(base_name, png_name)]
 
             dname = deps_name(deps_dir, scad)
-            oldest = min(mtime(png_name), mtime(bom_name))
+            oldest = png_name if mtime(png_name) < mtime(bom_name) else bom_name
             changed = check_deps(oldest, dname)
             changed = times.check_have_time(changed, scad_name)
             if changed:
@@ -257,7 +257,7 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
             print('<tr>',  file = doc_file, end = '')
             for type in types:
                 if i < len(index[type]):
-                    name = index[type][i]
+                    name = sorted(index[type])[i]
                     print('<td> <a href = "#' + name + '">' + name + '</a> </td>', file = doc_file, end = '')
                 else:
                     print('<td></td>', file = doc_file, end = '')

scripts/views.py

@@ -161,13 +161,13 @@ def views(target, do_assemblies = None):
                                         png_name = target_dir + '/' + module + '.png'
                                         if not explode:
                                             png_name = png_name.replace('_assembly', '_assembled')
-                                        changed = check_deps(mtime(png_name), dname)
+                                        changed = check_deps(png_name, dname)
                                         changed = times.check_have_time(changed, png_name)
                                         tmp_name = 'tmp.png'
                                         if changed:
                                             print(changed)
                                             t = time.time()
-                                            openscad.run("-D$pose=1", "-D$explode=%d" % explode, colour_scheme, "--projection=p", "--imgsize=4096,4096", "--autocenter", "--viewall", "-d", dname, "-o", tmp_name, png_maker_name);
+                                            openscad.run("-D$show_threads=1", "-D$pose=1", "-D$explode=%d" % explode, colour_scheme, "--projection=p", "--imgsize=4096,4096", "--autocenter", "--viewall", "-d", dname, "-o", tmp_name, png_maker_name);
                                             times.add_time(png_name, t)
                                             do_cmd(["magick", tmp_name, "-trim", "-resize", "1004x1004", "-bordercolor", background, "-border", "10", tmp_name])
                                             update_image(tmp_name, png_name)
@@ -219,36 +219,49 @@ def views(target, do_assemblies = None):
             # Global BOM
             #
             print('<a name="Parts_list"></a>\n## Parts list', file = doc_file)
-            vitamins = {}
-            printed = {}
-            routed = {}
+            types = ["vitamins", "printed", "routed"]
+            headings = {"vitamins" : "vitamins", "printed" : "3D printed parts", "routed" : "CNC routed parts"}
+            things = {}
+            for t in types:
+                things[t] = {}
             for ass in flat_bom:
-                for v in ass["vitamins"]:
-                    if v in vitamins:
-                        vitamins[v] += ass["vitamins"][v]
-                    else:
-                        vitamins[v] = ass["vitamins"][v]
-                for p in ass["printed"]:
-                    if p in printed:
-                        printed[p] += ass["printed"][p]
-                    else:
-                        printed[p] = ass["printed"][p]
+                for t in types:
+                    for thing in ass[t]:
+                        if thing in things[t]:
+                            things[t][thing] += ass[t][thing]
+                        else:
+                            things[t][thing] = ass[t][thing]
             for ass in flat_bom:
                 name = ass["name"][:-9].replace('_', ' ').title().replace(' ','&nbsp;')
                 print('| <span style="writing-mode: vertical-rl; text-orientation: mixed;">%s</span> ' % name, file = doc_file, end = '')
             print('| <span style="writing-mode: vertical-rl; text-orientation: mixed;">TOTALS</span> |  |', file = doc_file)
+
             print(('|--:' * len(flat_bom) + '|--:|:--|'), file = doc_file)
-            for v in sorted(vitamins, key = lambda s: s.split(":")[-1]):
-                for ass in flat_bom:
-                    count = ass["vitamins"][v] if v in ass["vitamins"] else '.'
-                    print('| %s ' % pad(count, 2, 1), file = doc_file, end = '')
-                print('|  %s | %s |' % (pad(vitamins[v], 2, 1), pad(v.split(":")[1], 2)), file = doc_file)
-            print(('|  ' * len(flat_bom) + '| | **3D Printed parts** |'), file = doc_file)
-            for p in sorted(printed):
-                for ass in flat_bom:
-                    count = ass["printed"][p] if p in ass["printed"] else '.'
-                    print('| %s ' % pad(count, 2, 1), file = doc_file, end = '')
-                print('| %s | %s |' % (pad(printed[p], 2, 1), pad(p, 3)), file = doc_file)
+
+            for t in types:
+                if things[t]:
+                    totals = {}
+                    heading = headings[t][0:1].upper() + headings[t][1:]
+                    print(('|  ' * len(flat_bom) + '| | **%s** |') % heading, file = doc_file)
+                    for thing in sorted(things[t], key = lambda s: s.split(":")[-1]):
+                        for ass in flat_bom:
+                            count = ass[t][thing] if thing in ass[t] else 0
+                            print('| %s ' % pad(count if count else '.', 2, 1), file = doc_file, end = '')
+                            name = ass["name"]
+                            if name in totals:
+                                totals[name] += count
+                            else:
+                                totals[name] = count
+                        print('|  %s | %s |' % (pad(things[t][thing], 2, 1), pad(thing.split(":")[-1], 2)), file = doc_file)
+
+                    grand_total = 0
+                    for ass in flat_bom:
+                        name = ass["name"]
+                        total = totals[name] if name in totals else 0
+                        print('| %s ' % pad(total if total else '.', 2, 1), file = doc_file, end = '')
+                        grand_total += total
+                    print("| %s | %s |" % (pad(grand_total, 2, 1), pad('Total %s count' % headings[t], 2)), file = doc_file)
+
             print(file = doc_file)
             eop(print_mode, doc_file)
             #
@@ -267,7 +280,7 @@ def views(target, do_assemblies = None):
                     print("### Vitamins",         file = doc_file)
                     print("|Qty|Description|",    file = doc_file)
                     print("|--:|:----------|",    file = doc_file)
-                    for v in vitamins:
+                    for v in sorted(vitamins, key = lambda s: s.split(":")[-1]):
                         print("|%d|%s|" % (vitamins[v], v.split(":")[1]),     file = doc_file)
                     print("\n", file = doc_file)
 

tests/d_connectors.scad

@@ -35,4 +35,5 @@ module d_connectors()
                 }
 
 if($preview)
-    d_connectors();
+    let($show_threads = true)
+        d_connectors();

tests/fillet.scad

@@ -20,7 +20,8 @@ include <../global_defs.scad>
 use <../utils/fillet.scad>
 
 module fillets() {
-    fillet(3, 25);
+    rotate(180)
+        fillet(3, 10);
 }
 
 fillets();

tests/geared_steppers.scad

@@ -0,0 +1,27 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../vitamins/geared_steppers.scad>
+
+use <../utils/layout.scad>
+
+module geared_steppers()
+    layout([for(g = geared_steppers) gs_diameter(g)], 5)
+        geared_stepper(geared_steppers[$i]);
+
+geared_steppers();

tests/global.scad

@@ -25,6 +25,9 @@ module globals() {
 
         translate([30, 0])
             ellipse(15, 7);
+
+        translate([50, 0])
+            right_triangle(10, 20, 0);
     }
 }
 

tests/hygrometer.scad

@@ -0,0 +1,22 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+use <../vitamins/hygrometer.scad>
+
+if($preview)
+    hygrometer();

tests/inserts.scad

@@ -21,10 +21,20 @@ use <../utils/layout.scad>
 
 include <../vitamins/inserts.scad>
 
-module inserts()
+module inserts() {
+
     for(i = [0: len(inserts) -1])
         translate([10 * i, 0])
             insert(inserts[i]);
 
+    color(pp1_colour)
+        translate([len(inserts) * 10, 0]) {
+            insert_lug(inserts[0], 2, 1);
+
+            translate([10, 0])
+                insert_boss(inserts[0], z = 10, wall = 2);
+        }
+}
+
 if($preview)
     inserts();

tests/ldrs.scad

@@ -0,0 +1,27 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../vitamins/ldrs.scad>
+
+use <../utils/layout.scad>
+
+module ldrs()
+    layout([for(l = ldrs) ldr_diameter(l)], 5)
+        LDR(ldrs[$i]);
+
+ldrs();

tests/pcb_mount.scad

@@ -0,0 +1,35 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../lib.scad>
+use <../printed/pcb_mount.scad>
+
+PI_IO = ["PI_IO", "PI_IO V2",       35.56, 25.4, 1.6, 0,    0,   0, "green", true, [],
+    [[(3.015 - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.685) * 25.4, 90, "term35", 2],
+     [(3.46  - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69)  * 25.4, 90, "term35", 2],
+     [(3.91  - 2.7) * 25.4 - 3.5 /2, (4.5 - 3.69)  * 25.4, 90, "term35", 2],
+     [(3.4   - 2.7) * 25.4,          (4.5 - 4.15)  * 25.4,  0, "2p54socket", 13, 2],
+    ], []];
+
+module pcb_mounts()
+    if($preview)
+        pcb_mount_assembly(PI_IO, 3);
+    else
+        pcb_mount(PI_IO);
+
+pcb_mounts();

tests/pcbs.scad

@@ -23,7 +23,7 @@ include <../vitamins/d_connectors.scad>
 include <../vitamins/pcbs.scad>
 
 module pcbs()
-    layout([for(p = pcbs) pcb_width(p)], 15)
+    layout([for(p = pcbs) pcb_width(p)], 10)
         translate([0, pcb_length(pcbs[$i]) / 2])
             rotate(90)
                 pcb_assembly(pcbs[$i], 5 + $i, 3);

tests/pillars.scad

@@ -26,4 +26,5 @@ module pillars()
         pillar(pillars[$i]);
 
 if($preview)
-    pillars();
+    let($show_threads = true)
+        pillars();

tests/pin_headers.scad

@@ -28,15 +28,18 @@ module pin_headers()
         idc_transition(pin_headers[$i], 10);
 
         translate([0, 20])
-            pin_header(pin_headers[$i], 10, 2);
+            pin_header(pin_headers[$i], 10, 2, right_angle = true);
 
         translate([0, 40])
+            pin_header(pin_headers[$i], 10, 2);
+
+        translate([0, 60])
             box_header(pin_headers[$i], 10, 2);
 
-        translate([0, 65])
+        translate([0, 80])
             pin_socket(pin_headers[$i], 10, 2);
 
-        translate([0, 95])
+        translate([0, 110])
             pin_socket(pin_headers[$i], 10, 2, right_angle = true);
 
     }

tests/polyholes.scad

@@ -52,8 +52,8 @@ module polyholes() {
     sizes = [1.5, 2, 3, 4];
     for(i = [0 : len(sizes) - 1])
         translate([i * 10, -10]) {
-            color(pp1_colour) linear_extrude(height = 1)
-                poly_ring(ir = ir, or = cir + sizes[i] * extrusion_width);
+            color(pp1_colour)
+                poly_tube(ir = ir, or = cir + sizes[i] * extrusion_width, h = 1);
 
             rod(2 * ir, 3);
        }

tests/ring_terminals.scad

@@ -24,7 +24,7 @@ include <../vitamins/ring_terminals.scad>
 
 module ring_terminals()
     layout([for(t = ring_terminals) ringterm_od(t)], 5)
-        rotate(90)
+        rotate(180)
             ring_terminal_assembly(ring_terminals[$i], 3);
 
 if($preview)

tests/rod.scad

@@ -24,8 +24,14 @@ include <../vitamins/linear_bearings.scad>
 use <../vitamins/rod.scad>
 
 module rods()
-    layout([for(b = linear_bearings) 2 * bearing_radius(b)])
+    layout([for(b = linear_bearings) 2 * bearing_radius(b)]) {
+
         rod(bearing_rod_dia(linear_bearings[$i]), 80);
 
+        translate([0, 20])
+            studding(bearing_rod_dia(linear_bearings[$i]), 80);
+    }
+
 if($preview)
-    rods();
+    let($show_threads = true)
+        rods();

tests/screws.scad

@@ -34,4 +34,5 @@ for(y = [0 : len(screw_lists) -1])
     }
 
 if($preview)
-    screws();
+    let($show_threads = true)
+        screws();

tests/teardrops.scad

@@ -36,7 +36,10 @@ module teardrops() {
                         tearslot(h = 0, r = 3, w = 10);
 
                     translate([30, 15])
-                         vertical_tearslot(h = 0, r =3, l = 10);
+                        vertical_tearslot(h = 0, r =3, l = 10);
+
+                    translate([20, 10])
+                        semi_teardrop(h = 0, r = 3);
                 }
 }
 

tests/wire.scad

@@ -61,7 +61,7 @@ module wires() {
                     translate([-w / 2, 0])
                         square([w, h]);
 
-                    mouse_hole(bundle, 0);
+                    mouse_hole(bundle, 0, true);
                 }
 
         translate_z(-thickness)

utils/core/bom.scad

@@ -63,6 +63,22 @@ module pose(a = [55, 0, 25], t = [0, 0, 0], exploded = undef)       //! Pose an
                             translate(-t)
                                 children();
 
+module pose_hflip(exploded = undef)       //! Pose an STL or assembly for rendering to png by flipping around the Y axis, ```exploded = true for``` just the exploded view or ```false``` for unexploded only.
+    if(is_undef($pose) || !is_undef($posed) || (!is_undef(exploded) && exploded != !!exploded()))
+        children();
+    else
+        let($posed = true) // only pose the top level
+            hflip()
+                children();
+
+module pose_vflip(exploded = undef)       //! Pose an STL or assembly for rendering to png by flipping around the X axis, ```exploded = true for``` just the exploded view or ```false``` for unexploded only.
+    if(is_undef($pose) || !is_undef($posed) || (!is_undef(exploded) && exploded != !!exploded()))
+        children();
+    else
+        let($posed = true) // only pose the top level
+            vflip()
+                children();
+
 
 module assembly(name) {                 //! Name an assembly that will appear on the BOM, there needs to a module named ```<name>_assembly``` to make it
     if(bom_mode())

utils/core/global.scad

@@ -43,7 +43,7 @@ module ellipse(xr, yr) scale([1, yr / xr]) circle4n(xr);
 
 module extrude_if(h, center = true)                 //! Extrudes 2D object to 3D when ```h``` is nonzero, otherwise leaves it 2D
     if(h)
-        linear_extrude(height = h, center = center) // 3D
+        linear_extrude(height = h, center = center, convexity = 2) // 3D
             children();
     else
         children();                                 // 2D
@@ -63,6 +63,10 @@ module semi_circle(r, d = undef)                    //! A semi circle in the pos
             square([2 * sq, sq]);
     }
 
+module right_triangle(width, height, h, center = true) //! A right angled triangle with the 90° corner at the origin. 3D when ```h``` is nonzero, otherwise 2D
+    extrude_if(h, center = center)
+        polygon(points = [[0,0], [width, 0], [0, height]]);
+
 include <sphere.scad>
 include <bom.scad>
 include <polyholes.scad>

utils/core/polyholes.scad

@@ -62,6 +62,10 @@ module poly_ring(or, ir) { //! Make a 2D ring adjusted to have the correct inter
                 }
 }
 
+module poly_tube(or, ir, h, center = false) //! Make a tube adjusted to have the correct internal radius
+    extrude_if(h, center)
+        poly_ring(or, ir);
+
 module drill(r, h = 100) //! Make a cylinder for drilling holes suitable for CNC routing, set h = 0 for circle
     extrude_if(h)
         circle(r = corrected_radius(r, r2sides(r)));

utils/core/teardrops.scad

@@ -34,6 +34,18 @@ module teardrop(h, r, center = true, truncate = true) //! For making horizontal
                     polygon([[0, 0], [eps, 0], [0, r * sqrt(2)]]);
             }
 
+module semi_teardrop(h, r, d = undef, center = true) //! A semi teardrop in the positive Y domain
+    render(convexity = 5)
+        extrude_if(h, center)
+            intersection() {
+                R = is_undef(d) ? r : d / 2;
+                teardrop(r = R, h = 0);
+
+                sq = R + 1;
+                translate([-sq, 0])
+                    square([2 * sq, sq]);
+            }
+
 module teardrop_plus(h, r, center = true, truncate = true) //! Slightly bigger teardrop to allow for the 3D printing staircase effect
     teardrop(h, r + layer_height / 4, center, truncate);
 

utils/fillet.scad

@@ -28,5 +28,6 @@ module fillet(r, h, center = false) //! Fillet with specified radius and height
             translate([-eps, -eps, 0])
                 square(r + eps);
 
-            circle(r + eps);
+            translate([r, r])
+                circle(r + eps);
         }

utils/maths.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! Maths utilities for minapulating vectors and matrices.
+//! Maths utilities for manipulating vectors and matrices.
 //
 function sqr(x) = x * x;
 

utils/thread.scad

@@ -0,0 +1,114 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! A utilities for making threads with sweep.
+//
+include <../core.scad>
+use <sweep.scad>
+use <maths.scad>
+
+function thread_profile(h, crest, angle) = //! Create thread profile path
+    let(base = crest + 2 * h * tan(angle / 2))
+        [[-base / 2, 0, 0], [-crest / 2, h, 0], [crest / 2, h, 0], [base / 2, 0, 0]];
+
+module male_thread(pitch, minor_d, length, profile, taper_top = true, center = true, solid = true) { //! Create male thread
+    turns = length / pitch + (taper_top ? 0 : 1);
+    r = minor_d / 2;
+    sides = r2sides(r);
+    h = max([for(p = profile) p.y]);
+    final = (turns - 1) * sides;
+    path = [for(i = [0 : sides * turns],
+                R = i < sides ? r - h + h * i / sides
+                    : i > final && taper_top ? r - h * (i - final) / sides : r,
+                a = i * 360 / sides)
+                    [R * sin(-a), R * cos(-a), pitch * a / 360]];
+    t = atan(pitch / sides / (r * cos(225 / sides)));
+    translate_z(center ? -length / 2 : 0) {
+        render() intersection() {
+            sweep(path, profile, twist = t * sides * turns);
+            cylinder(d = minor_d + 5, h = length);
+        }
+        if(solid)
+            rotate(90)
+                cylinder(d = minor_d + eps, h = length);
+    }
+}
+
+module female_thread(pitch, outer_d, length, profile, taper_top = true, center = true) { //! Create female thread
+    turns = length / pitch + (taper_top ? 0 : 1);
+    r = outer_d / 2;
+    sides = r2sides(r);
+    h = max([for(p = profile) p.y]);
+    final = (turns - 1) * sides;
+    path = [for(i = [0 : sides * turns],
+                R = i < sides ? r + h - h * i / sides
+                    : i > final && taper_top ? r + h * (i - final) / sides : r,
+                a = i * 360 / sides)
+                    [R * sin(-a), R * cos(-a), pitch * a / 360]];
+    t = atan(pitch / sides / (r * cos(225 / sides)));
+    translate_z(center ? -length / 2 : 0) {
+        render() intersection() {
+            sweep(path, reverse([for(p = profile) [p.x, -p.y, 0]]), twist = t * sides * turns);
+            cylinder(d = outer_d + 5, h = length);
+        }
+    }
+}
+
+module male_metric_thread(d, pitch, length, taper_top = true, center = true) { //! Create male thread with metric profile
+    h = sqrt(3) / 2 * pitch;
+    minor_d = d - 5 * h / 4;
+    male_thread(pitch, minor_d, length, thread_profile((d - minor_d) / 2, pitch / 8, 60), taper_top, center);
+}
+
+module female_metric_thread(d, pitch, length, taper_top = true, center = true) { //! Create male thread with metric profile
+    h = sqrt(3) / 2 * pitch;
+    outer_d = d + 5 * h / 4;
+    male_thread(pitch, outer_d, length, thread_profile((outer_d - d) / 2, pitch / 8, 60), taper_top, center);
+}
+
+function metric_coarse_pitch(d) //! Convert metric diameter to pitch
+    = d == 1.6 ? 0.35  // M1.6
+               : [0.4, // M2
+                  0.45,// M2.5
+                  0.5, // M3
+                  0.6, // M3.5
+                  0.7, // M4
+                  0,
+                  0.8, // M5
+                  0,
+                  1.0, // M6
+                  0,
+                  0,
+                  0,
+                  1.25, // M8
+                  0,
+                  0,
+                  0,
+                  1.5,  // M10
+                  0,
+                  0,
+                  0,
+                  1.75, // M12
+                 ][d * 2 - 4];
+
+male_metric_thread(3, 0.5, 25);
+
+translate([10, 0])
+male_metric_thread(8, 1.25, 30);

vitamins/belt.scad

@@ -21,6 +21,8 @@
 //! Models timing belt running over toothed or smooth pulleys and calculates an accurate length.
 //! Only models 2D paths, so not core XY!
 //!
+//! To make the back of the belt run against a smooth pulley on the outside of the loop specify a negative pitch radius.
+//!
 //! By default the path is a closed loop but a gap length and position can be specified to make open loops.
 //!
 //! Individual teeth are not drawn, instead they are represented by a lighter colour.

vitamins/blowers.scad

@@ -17,7 +17,7 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 
-RB5015 = ["RM5015", "Blower Runda RB5015",           51.3, 51, 15, 31.5, M4_cap_screw, 26, [27.3, 25.4], 4.5, [[4.3, 45.4], [47.3,7.4]], 20, 14, 1.5, 1.3, 1.2, 15];
+RB5015 = ["RB5015", "Blower Runda RB5015",           51.3, 51, 15, 31.5, M4_cap_screw, 26, [27.3, 25.4], 4.5, [[4.3, 45.4], [47.3,7.4]], 20, 14, 1.5, 1.3, 1.2, 15];
 PE4020 = ["PE4020", "Blower Pengda Technology 4020", 40,   40, 20, 27.5, M3_cap_screw, 22, [21.5, 20  ], 3.2, [[37,3],[3,37],[37,37]], 29.3, 17, 1.7, 1.2, 1.3, 13];
 
 blowers = [PE4020, RB5015];

vitamins/d_connector.scad

@@ -21,6 +21,7 @@
 //! D-connectors. Can be any number of ways, male or female, solder buckets, PCB mount or IDC, with or without pillars.
 //
 include <../core.scad>
+use <../utils/thread.scad>
 
 d_pillar_color                   = grey90;
 d_plug_shell_color               = grey80;
@@ -51,16 +52,21 @@ module d_pillar() { //! Draw a pillar for a D-connector
     height = 4.5;
     screw = 2.5;
     screw_length = 8;
-    color(d_pillar_color)  {
-        translate_z(-screw_length)
-            cylinder(d = screw, h = screw_length + 1);
 
+    translate_z(-screw_length)
+        if(show_threads)
+            color(d_pillar_color * 0.7)
+                male_metric_thread(screw, metric_coarse_pitch(screw), screw_length, false, false);
+        else
+            color(d_pillar_color)
+                cylinder(d = screw, h = screw_length + 1);
+
+    color(d_pillar_color)
         linear_extrude(height = height)
             difference() {
                 circle(r = rad, $fn = 6);
                 circle(d = screw);
             }
-    }
 }
 
 module d_plug(type, socket = false, pcb = false, idc = false) { //! Draw specified D plug, which can be IDC, PCB or plain solder bucket

vitamins/displays.scad

@@ -47,6 +47,19 @@ LCD1602A = ["LCD1602A", "LCD display 1602A", 71.3, 24.3, 7.0, LCD1602APCB,
           [],                                       // clearance need for the ts ribbon
         ];
 
+LCDS7282BPCB = ["", "", 85, 36, 1.65, 0, 2.56, 0, "green", false, [[-2.5, -2.5], [-2.5, 2.5], [2.5, 2.5], [2.5, -2.5]],
+      [ [3.5, 18, 0, "2p54header", 2, 7]
+      ],
+      []];
+
+LCDS7282B = ["LCDS7282B", "LCD display S-7282B", 73.6, 28.7, 9.6, LCDS7282BPCB,
+          [-2.5, 0, 0],                             // pcb offst
+          [[-64.5 / 2, -14.5 / 2], [64.5 / 2, 14.5 / 2, 0.6]],              // aperture
+          [],                                       // touch screen
+          0,                                        // thread length
+          [],                                       // clearance need for the ts ribbon
+        ];
+
 SSD1963_4p3PCB = ["", "", 120, 74, 1.65, 3, 3, 0, "mediumblue", false, [[3, 3], [-3, 3], [-3, -3], [3, -3]],
     [ [2.75 + 1.27, 37, 90, "2p54header", 20, 2]
     ],
@@ -60,6 +73,6 @@ SSD1963_4p3 = ["SSD1963_4p3", "LCD display SSD1963 4.3\"", 105.5, 67.2, 3.4, SSD
         [[0, -34.5], [12, -31.5]],
         ];
 
-displays = [HDMI5, SSD1963_4p3, LCD1602A];
+displays = [HDMI5, SSD1963_4p3, LCD1602A, LCDS7282B];
 
 use <display.scad>

vitamins/e3d.scad

@@ -61,30 +61,34 @@ heater_y = heater_width / 2;
 
 fan_x_offset = rad_dia / 2 + 4;
 
-module e3d_resistor(type) {
+module e3d_resistor(type, resistor_wire_rotate = [0,0,0]) {
     translate([11 - heater_x, -3 - heater_y, heater_height / 2 + nozzle_h]) {
         color("grey")
             rotate([-90, 0, 0])
                 cylinder(r = resistor_dia / 2, h = resistor_len);
 
         color("red")
-            translate([-3.5/2, resistor_len  + 3.5/2 + 1, 0]) {
-                cylinder(d = 3.5, h = 36);
+			translate([0, resistor_len + 3.5/2 + 1, 0]) {
+				rotate(resistor_wire_rotate) {
+					translate([-3.5/2, 0, 0]) {
+						cylinder(d = 3.5, h = 36);
 
-                translate([3.5, 0, 0])
-                    cylinder(r = 3.5 / 2, h = 36);
-            }
+						translate([3.5, 0, 0])
+							cylinder(r = 3.5 / 2, h = 36);
+					}
+				}
+			}
     }
 }
 
-module heater_block(type) {
+module heater_block(type, resistor_wire_rotate = [0,0,0]) {
     translate_z(-hot_end_length(type))  {
         translate_z(nozzle_h)
             color("lightgrey")
                 translate([-heater_x, -heater_y, 0])
                     cube([heater_length, heater_width, heater_height]);
 
-        e3d_resistor(type);
+        e3d_resistor(type, resistor_wire_rotate);
         e3d_nozzle(type);
     }
 }
@@ -118,7 +122,7 @@ module e3d_fan(type) {
                 fan(fan30x10);
 }
 
-module e3d_hot_end(type, filament, naked = false) {
+module e3d_hot_end(type, filament, naked = false, resistor_wire_rotate = [0,0,0]) {
     insulator_length = hot_end_insulator_length(type);
     inset = hot_end_inset(type);
     h_ailettes = rad_len / (2 * rad_nb_ailettes - 1);
@@ -146,17 +150,17 @@ module e3d_hot_end(type, filament, naked = false) {
             }
 
     rotate(90)
-        heater_block(type);
+        heater_block(type, resistor_wire_rotate);
 
     if(!naked)
         translate_z(inset - insulator_length)
             e3d_fan();
 }
 
-module e3d_hot_end_assembly(type, filament, naked = false) {
+module e3d_hot_end_assembly(type, filament, naked = false, resistor_wire_rotate = [0,0,0]) {
     bundle = 3.2;
 
-    e3d_hot_end(type, filament, naked);
+    e3d_hot_end(type, filament, naked, resistor_wire_rotate);
 
     // Wire and ziptie
     if(!naked)

vitamins/fan.scad

@@ -147,24 +147,32 @@ module fan_holes(type, poly = false, screws = true, h = 100) { //! Make all the
     }
 }
 
-function nut_and_washer_thickness(screw, nyloc) = washer_thickness(screw_washer(screw)) + nut_thickness(screw_nut(screw), nyloc);
-function fan_screw_depth(type) = fan_boss_d(type) ? fan_depth(type) : fan_thickness(type);
-function fan_screw_length(type, thickness) = screw_longer_than(thickness + fan_screw_depth(type) + nut_and_washer_thickness(fan_screw(type), true)); //! Screw length required
+function fan_screw_depth(type, full_depth = false) = fan_boss_d(type) || full_depth ? fan_depth(type) : fan_thickness(type);
 
-module fan_assembly(type, thickness, include_fan = true) { //! Fan with its fasteners
+function fan_screw_length(type, thickness, full_depth = false) =
+    let(depth = fan_screw_depth(type, full_depth),
+        washers = depth == fan_depth(type) ? 2 : 1,
+        washer = screw_washer(fan_screw(type)),
+        nut = screw_nut(fan_screw(type)))
+            screw_longer_than(thickness + depth + washer_thickness(washer) * washers + nut_thickness(nut, true)); //! Screw length required
+
+module fan_assembly(type, thickness, include_fan = true, screw = false, full_depth = false) { //! Fan with its fasteners
     translate_z(-fan_depth(type) / 2) {
         if(include_fan)
             fan(type);
 
-        screw = fan_screw(type);
-        nut = screw_nut(screw);
+        Screw = screw ? screw : fan_screw(type);
+        nut = screw_nut(Screw);
         fan_hole_positions(type) {
             translate_z(thickness)
-                screw_and_washer(screw, fan_screw_length(type, thickness));
+                screw_and_washer(Screw, fan_screw_length(type, thickness, full_depth));
 
-            translate_z(include_fan ? -fan_screw_depth(type) : 0)
+            translate_z(include_fan ? -fan_screw_depth(type, full_depth) : 0)
                 vflip()
-                    nut(nut, true);
+                    if(fan_screw_depth(type, full_depth) == fan_depth(type))
+                        nut_and_washer(nut, true);
+                    else
+                        nut(nut, true);
         }
      }
 }

vitamins/fans.scad

@@ -40,7 +40,8 @@ fan50x15 = [50, 15, 48, 20,    M4_dome_screw, 25,   12.5,100,7, 0,   undef];
 fan40x11 = [40, 11, 37, 16,    M3_dome_screw, 25,   7.5,100, 9, 0,   undef];
 fan30x10 = [30, 10, 27, 12,    M3_dome_screw, 17,   10, 100, 5, 0,   undef];
 fan25x10 = [25, 10, 24, 10,   M2p5_pan_screw, 16,   10, 100, 5, 0,   undef];
+fan17x8  = [17,  8, 16, 6.75,  M2_cap_screw,  12.6,  8, 100, 7, 0,   undef];
 
-fans = [fan25x10, fan30x10, fan40x11, fan50x15, fan60x15, fan60x25, fan70x15, fan80x25, fan80x38, fan120x25];
+fans = [fan17x8, fan25x10, fan30x10, fan40x11, fan50x15, fan60x15, fan60x25, fan70x15, fan80x25, fan80x38, fan120x25];
 
 use <fan.scad>

vitamins/geared_stepper.scad

@@ -0,0 +1,114 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Geared tin can steppers
+//
+include <../core.scad>
+use <../utils/rounded_cylinder.scad>
+use <../utils/round.scad>
+
+function gs_diameter(type)     = type[2]; //! Can diameter
+function gs_height(type)       = type[3]; //! Can height
+function gs_pitch(type)        = type[4]; //! Screw pitch
+function gs_lug_w(type)        = type[5]; //! Screw lug width
+function gs_lug_t(type)        = type[6]; //! Screw lug thickness
+function gs_hole_d(type)       = type[7]; //! Screw hole diameter
+function gs_offset(type)       = type[8]; //! Offset of the shaft from the centre of the can
+function gs_boss_d(type)       = type[9]; //! Boss around the shaft diameter
+function gs_boss_h(type)       = type[10]; //! Boss around the shaft height
+function gs_shaft_d(type)      = type[11]; //! Shaft diameter
+function gs_shaft_flat(type)   = type[12]; //! Shaft width across the flats
+function gs_shaft_length(type) = type[13]; //! Shaft length
+function gs_flat_length(type)  = type[14]; //! Shaft flat length
+function gs_bulge_w(type)      = type[15]; //! Plastic bulge width
+function gs_bulge_d(type)      = type[16]; //! Plastic bulge depth from centre
+function gs_bulge_h(type)      = type[17]; //! Plastic bulge height
+function gs_bulge2_w(type)     = type[18]; //! Plastic rear bulge width
+function gs_bulge2_d(type)     = type[19]; //! Plastic rear bulge depth from centre
+function gs_bulge2_h(type)     = type[20]; //! Plastic rear bulge height
+
+module geared_stepper_screw_positions(type) //! Place children at the screw positions
+    for(side = [-1, 1])
+        translate([side * gs_pitch(type) / 2, -gs_offset(type)])
+            children();
+
+module geared_stepper(type) { //! Draw the specified geared stepper
+    vitamin(str("geared_stepper(", type[0], "): Geared stepper - ", type[1]));
+
+    radius = gs_diameter(type) / 2;
+    height = gs_height(type);
+    offset = gs_offset(type);
+    color("silver") {
+        translate([0, -offset])
+            rounded_cylinder(r = radius, h = height, r2 = 1);
+
+        cylinder(d = gs_boss_d(type), h = 2 * gs_boss_h(type), center = true);
+
+        linear_extrude(height = gs_lug_t(type))
+            difference() {
+                hull()
+                    geared_stepper_screw_positions(type)
+                        circle(d = gs_lug_w(type));
+
+                geared_stepper_screw_positions(type)
+                    circle(d = gs_hole_d(type));
+            }
+
+        translate([0, -offset - radius, eps])
+            cube([gs_bulge_w(type) - 2, 2 * (gs_bulge_d(type) - radius) - 2, 2 * eps], center = true);
+    }
+    vflip()
+        color(brass) {
+            d = gs_shaft_d(type);
+            h = gs_shaft_length(type);
+            linear_extrude(height = h)
+                intersection() {
+                    circle(d = d);
+
+                    square([d + 1, gs_shaft_flat(type)], center = true);
+                }
+
+            cylinder(d = d, h = h - gs_flat_length(type));
+        }
+
+    color("skyblue") {
+        h1 = gs_bulge_h(type);
+        translate([0, - offset - radius, eps])
+            rounded_rectangle([gs_bulge_w(type), 2 * (gs_bulge_d(type) - radius), h1], 0.5, center = false);
+
+        h2 = gs_bulge2_h(type);
+        translate([0, - offset, h1 + 1 - h2])
+            linear_extrude(height = h2)
+                round(0.5)
+                    intersection() {
+                        circle(gs_bulge2_d(type));
+
+                        translate([0, -50])
+                            square([gs_bulge2_w(type), 100], center = true);
+                    }
+    }
+
+    translate_z(2.5)
+        for(i = [0 : 4])
+            translate([i - 2.5, 0])
+                rotate([90, 0, 0])
+                    color(["yellow", "orange", "red", "pink", "blue"][i])
+                        cylinder(d = 1, h = radius + offset + 10);
+}

vitamins/geared_steppers.scad

@@ -0,0 +1,27 @@
+//
+// NopSCADlib Copyright Chris Palmer 2019
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Geared tin can steppers
+//
+28BYJ_48 = ["28BYJ_48", "28BYJ-48 5V", 28, 19, 35, 7, 0.85, 4.2, 8, 9, 1.5, 5, 3, 10, 6, 14.7, 17, 16.5, 17.7, 15.5, 13.8 ];
+
+geared_steppers = [28BYJ_48];
+
+use <geared_stepper.scad>

vitamins/hot_end.scad

@@ -44,10 +44,10 @@ function hot_end_length(type) = hot_end_total_length(type) - hot_end_inset(type)
 use <jhead.scad>
 use <e3d.scad>
 
-module hot_end(type, filament, naked = false) { //! Draw specified hot end
+module hot_end(type, filament, naked = false, resistor_wire_rotate = [0,0,0]) { //! Draw specified hot end
     if(hot_end_style(type) == jhead)
         jhead_hot_end_assembly(type, filament, naked);
 
     if(hot_end_style(type) == e3d)
-        e3d_hot_end_assembly(type, filament, naked);
+        e3d_hot_end_assembly(type, filament, naked, resistor_wire_rotate);
 }

vitamins/hygrometer.scad

@@ -0,0 +1,87 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Mini LCD Celsius Digital Thermometer Hygrometer Temperature Humidity Meter Gauge on eBay
+//
+include <../core.scad>
+use <../utils/round.scad>
+
+od = 40.9;
+h = 14;
+flange_d = 45.5;
+flange_t = 1.5;
+flange_d2 = 32;
+flange_t2 = 2;
+apperture_d = 24.7;
+hygrometer_hole_r = 21.3;
+slot_w = 5.5;
+
+module hygrometer_hole(h = 0) { //! Drill the hole for a hygrometer
+    round(cnc_bit_r) {
+        intersection() {
+            drill(hygrometer_hole_r, h);
+
+            rotate(30)
+                square([slot_w + 2 * cnc_bit_r, 100], center = true);
+        }
+        drill((od + 0.2) / 2, h);
+    }
+}
+
+function hygrometer_or() = flange_d / 2; //! The outside radius of a hygrometer
+
+module hygrometer() { //! Draw a hygrometer
+    vitamin("hygrometer(): Mini LCD Digital Thermometer / Hygrometer");
+
+    explode(40) {
+        color(grey30)
+            rotate_extrude()
+                polygon([
+                    [0, 0],
+                    [apperture_d / 2, 0],
+                    [apperture_d / 2, flange_t],
+                    [flange_d2 / 2,   flange_t2],
+                    [flange_d / 2,    flange_t],
+                    [flange_d / 2,    0],
+                    [od / 2,          0],
+                    [od / 2,          -h],
+                    [0,               -h]
+                ]);
+
+        color("#94A7AB")
+            cylinder(d = apperture_d, h = eps);
+
+        color("black")
+            linear_extrude(height = 0.2, center = true) {
+                translate([0, 3])
+                    text("20_4", font = "7 segment", valign = "bottom", halign = "center", size = apperture_d / 6);
+
+                translate([7, 3])
+                    text("C", font = "7 segment", valign = "bottom", halign = "center", size = apperture_d / 8);
+
+                translate([-1.9, 0.5])
+                    text("50", font = "7 segment", valign = "top", halign = "center", size = apperture_d / 2.7);
+
+                translate([0, -apperture_d / 6])
+                    text("          %", font = "Arial", valign = "center", halign = "center", size = apperture_d / 6);
+            }
+
+    }
+}

vitamins/insert.scad

@@ -21,6 +21,7 @@
 //! Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering iron with a conical bit set to 200°C.
 //
 include <../core.scad>
+use <../utils/quadrant.scad>
 
 function insert_length(type)         = type[1]; //! Length
 function insert_outer_d(type)        = type[2]; //! Outer diameter at the top
@@ -93,15 +94,75 @@ module insert_hole(type, counterbore = 0, horizontal = false) { //! Make a hole
         }
 }
 
-module insert_boss(type, z, wall = 2 * extrusion_width) { //! Make a boss to take an insert
-    render(convexity = 3)
-        difference() {
-            ir = insert_hole_radius(type);
-            linear_extrude(height = z)
-                hull()
-                    poly_ring(corrected_radius(ir) + wall, ir);
+function insert_boss_radius(type, wall) = corrected_radius(insert_hole_radius(type)) + wall; //! Compute the outer radius of an insert boss
 
-            translate_z(z)
-                insert_hole(type, max(0, z - insert_hole_length(type) - 2 * layer_height));
+module insert_boss(type, z, wall = 2 * extrusion_width) { //! Make a boss to take an insert
+    ir = insert_hole_radius(type);
+    or = corrected_radius(ir) + wall;
+
+    module shape()
+        hull()
+            poly_ring(or, ir);
+
+    linear_extrude(height = z)
+        poly_ring(or, ir);
+
+    linear_extrude(height = z - insert_hole_length(type))
+        difference() {
+            shape();
+
+            poly_circle(insert_screw_diameter(type) / 2 + 0.1);
         }
+
+    if(z > insert_hole_length(type) + 2 * layer_height)
+        linear_extrude(height = 2 * layer_height)       // cap the end if room
+            shape();
+}
+
+module insert_lug(insert, wall, counter_bore = 0, extension = 0, corner_r = 0, flying = true) { //! Make a flying insert lug, see [ssr_shroud](#Ssr_shroud)
+    boss_r = insert_boss_radius(insert, wall);
+    boss_h = insert_hole_length(insert);
+    boss_h2 = boss_h + counter_bore;
+
+    module shape()
+        intersection() {
+            hull() {
+                circle(boss_r);
+
+                translate([boss_r + extension - eps, 0])
+                    square([eps, 2 * boss_r], center = true);
+            }
+            if(corner_r)
+                translate([boss_r + extension - corner_r, 0])
+                    rotate(-45)
+                        quadrant(w = 100, r = corner_r - eps, center = true);
+        }
+
+    translate_z(-boss_h)
+        linear_extrude(height = boss_h)
+             difference() {
+                shape();
+
+                poly_circle(insert_hole_radius(insert));
+            }
+
+    // insert boss counter_bore
+    translate_z(-boss_h2) {
+        linear_extrude(height = counter_bore + eps)
+             difference() {
+                shape();
+
+                poly_circle(insert_screw_diameter(insert) / 2 + 0.1);
+            }
+
+        // support cone
+        if(flying)
+            hull() {
+                linear_extrude(height = eps)
+                    shape();
+
+                translate([boss_r + extension - wall - eps, 0, - (2 * boss_r + extension - wall)])
+                    cube(eps, center = true);
+            }
+    }
 }

vitamins/ldr.scad

@@ -0,0 +1,105 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Light dependent resistors.
+//!
+//! Larger ones seem to have both a higher dark resistance and a lower bright light resistance.
+//
+include <../core.scad>
+
+function ldr_description(type) = type[1]; //! Description
+function ldr_diameter(type)    = type[2]; //! The diameter of the round bit
+function ldr_width(type)       = type[3]; //! Across the flats
+function ldr_thickness(type)   = type[4]; //! Thickness
+function ldr_pitch(type)       = type[5]; //! Pitch between the leads
+function ldr_active(type)      = type[6]; //! The active width
+function ldr_lead_d(type)      = type[7]; //! The lead diameter
+
+module LDR(type, lead_length = 3) { //! Draw an LDR, can specify the lead length
+    vitamin(str("ldr(", type[0], "): Light dependent resistor - ", ldr_description(type)));
+
+    module shape()
+        intersection() {
+            circle(d = ldr_diameter(type));
+
+            square([100, ldr_width(type)], center = true);
+        }
+
+    function serpentine_t() = let(w = ldr_width(type), n = floor(w / 0.5) + 0.5) w / (n * 2);
+
+    module serpentine() {
+        w = ldr_width(type);
+
+        t = serpentine_t();
+        pitch = 2 * t;
+        l = ldr_active(type);
+        lines = ceil(w / pitch);
+
+        for(i = [0 : lines - 1])
+            translate([0, i * pitch - w / 2 + t / 2]) {
+                square([l - 3 * t, t], center = true);
+
+                end = i % 2 ? 1 : -1;
+                $fn = 16;
+                translate([end * (l / 2 - 1.5 * t), t])
+                    rotate(-end * 90)
+                    difference() {
+                        semi_circle(1.5 * t);
+
+                        semi_circle(t / 2);
+                    }
+            }
+    }
+
+    t = ldr_thickness(type);
+
+    color("white")
+        linear_extrude(height = t - 0.4)
+            shape();
+
+    color("orange")
+        translate_z(t - 0.4)
+            linear_extrude(height = 0.1)
+                shape();
+
+    color([0.9, 0.9, 0.9])
+        translate_z(t - 0.3)
+            linear_extrude(height = 0.1)
+                difference() {
+                    offset(-serpentine_t())
+                        shape();
+
+                serpentine();
+            }
+
+    color("silver")
+        for(side = [-1, 1])
+            translate([side * ldr_pitch(type) / 2, 0]) {
+                translate_z(-lead_length)
+                    cylinder(d = ldr_lead_d(type), h = lead_length, $fn = 16);
+
+                translate_z(t - 0.3)
+                    cylinder(d = 1.5 * ldr_lead_d(type), h = 0.2, $fn = 16);
+            }
+    color([1, 1, 1, 0.25])
+        translate_z(t - 0.3 + eps)
+            linear_extrude(height = 0.3)
+                shape();
+}

vitamins/ldrs.scad

@@ -0,0 +1,28 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+// Light dependent resistors.
+//
+small_ldr = ["small_ldr", "small", 5,   4.2, 2.0, 3.2, 2.5, 0.4];
+large_ldr = ["large_ldr", "large", 9.2, 7.9, 2.0, 6.8, 4.5, 0.5];
+
+ldrs = [small_ldr, large_ldr];
+
+use <ldr.scad>

vitamins/microview.scad

@@ -43,14 +43,14 @@ module microview(cutout = false) {  //! Draw microview or generate a panel cutou
             translate_z(8.35) {
 
                 color("black")
-                    import("microview/GKM-002_R05_CHIP_UPPER_HOUSING-1.stl", convexity = 2);
+                    import("microview/GKM-002_R05_CHIP_UPPER_HOUSING-1.STL", convexity = 2);
 
                 translate([-2, 0, 0])
                     color("dimgray")
                         cube([12.5, 15.5, 4.41], center = true);
             }
             color("dimgray")
-                import("microview/GKM-003_R05_CHIP_LOWER_HOUSING.stl", convexity = 2);
+                import("microview/GKM-003_R05_CHIP_LOWER_HOUSING.STL", convexity = 2);
 
             for(side = [-1, 1], i = [0 : 7])
                 translate([side * inch(0.35), (i - 3.5) * inch(0.1)])

vitamins/nut.scad

@@ -58,7 +58,7 @@ module nut(type, nyloc = false, brass = false, nylon = false) { //! Draw specifi
                     rounded_cylinder(r = outer_rad * cos(30) , h = nyloc_thickness, r2 = (nyloc_thickness - thickness) / 2, ir = hole_rad);
         }
     if($children)
-        translate_z(thickness)
+        translate_z(nut_thickness(type, nyloc))
             children();
 }