Added smd_250V_fuse() and rd_box_cap().

Fixed missing value parameters from a lot of the SMD component instantiation examples.

CHANGELOG.md

@@ -3,6 +3,94 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
 
 
+#### [v21.24.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.24.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.24.0...v21.24.1 "diff with v21.24.0")
+*   2024-06-30 [`07866f7`](https://github.com/nophead/NopSCADlib/commit/07866f72845c9e08c90e371c92315bab54f003c6 "show commit") [H.](# "Hermann-SW") Add `PT_camera` to examples and gallery
+
+### [v21.24.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.24.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.23.2...v21.24.0 "diff with v21.23.2")
+*   2024-06-30 [`53d1ea9`](https://github.com/nophead/NopSCADlib/commit/53d1ea93cd339d3fb6e085be9314d7ec0b547796 "show commit") [C.P.](# "Chris Palmer") Can now specify a rotation angle for a `geared_stepper's` shaft.
+
+#### [v21.23.2](https://github.com/nophead/NopSCADlib/releases/tag/v21.23.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.23.1...v21.23.2 "diff with v21.23.1")
+*   2024-06-12 [`b00709d`](https://github.com/nophead/NopSCADlib/commit/b00709da820e1241422b6e156b0c61157c18d63d "show commit") [C.P.](# "Chris Palmer") Image edge pixel changes due to new PC.
+
+*   2024-06-12 [`c76be23`](https://github.com/nophead/NopSCADlib/commit/c76be2386715b80bbbc9a71c99214df7f3c71bc7 "show commit") [C.P.](# "Chris Palmer") Fixed thread bug on threaded inserts revealed by latest OpenSCAD snapshot.
+
+*   2024-06-12 [`f6f348b`](https://github.com/nophead/NopSCADlib/commit/f6f348b76e7986927a571e1c07c3f866bcbeeafe "show commit") [C.P.](# "Chris Palmer") Fixed rocker slot height.
+
+#### [v21.23.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.23.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.23.0...v21.23.1 "diff with v21.23.0")
+*   2024-05-08 [`870b396`](https://github.com/nophead/NopSCADlib/commit/870b396574935603305462f1fea88564c909aad8 "show commit") [C.](# "Chris") Revoved strailing comma in `let()` in `splines.scad`.
+
+### [v21.23.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.23.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.22.0...v21.23.0 "diff with v21.22.0")
+*   2024-04-21 [`c1fdb2e`](https://github.com/nophead/NopSCADlib/commit/c1fdb2e701672b2404e34f224e77f21fb2ff34da "show commit") [C.P.](# "Chris Palmer") Dpdated images and readme.
+
+*   2024-04-20 [`cbe2c08`](https://github.com/nophead/NopSCADlib/commit/cbe2c085b72d0e5d9f0c6485d5fa7df0e172a4cc "show commit") [V.](# "V.Shcriabets") Add  RCWL-0516 PCB
+
+### [v21.22.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.22.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.21.0...v21.22.0 "diff with v21.21.0")
+*   2024-04-21 [`dbf930f`](https://github.com/nophead/NopSCADlib/commit/dbf930fd366c28aa9e581d9fe01e3654b882923a "show commit") [C.P.](# "Chris Palmer") Added cubic splines and Catmull Rom splines.
+
+### [v21.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.20.0...v21.21.0 "diff with v21.20.0")
+*   2024-04-21 [`97cea65`](https://github.com/nophead/NopSCADlib/commit/97cea65f41714acd31a3a3b968d8c133ce1a91d2 "show commit") [C.P.](# "Chris Palmer") Cable clips can now use inserts or nut traps.
+
+### [v21.20.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.20.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.19.2...v21.20.0 "diff with v21.19.2")
+*   2024-04-21 [`c7e912c`](https://github.com/nophead/NopSCADlib/commit/c7e912cd77e189ef729f94956245f1c6a9f72012 "show commit") [C.P.](# "Chris Palmer") A optional path can now be specified for tubing.
+
+#### [v21.19.2](https://github.com/nophead/NopSCADlib/releases/tag/v21.19.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.19.1...v21.19.2 "diff with v21.19.1")
+*   2024-04-21 [`f563645`](https://github.com/nophead/NopSCADlib/commit/f563645e45817a4f89ef3cb1be9d932310c485c6 "show commit") [C.P.](# "Chris Palmer") Corrected M2 `nut_trap_depth,` was too big.
+
+#### [v21.19.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.19.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.19.0...v21.19.1 "diff with v21.19.0")
+*   2024-04-21 [`2840cc2`](https://github.com/nophead/NopSCADlib/commit/2840cc2390a8e776add8ca3ef715abfc8d15dadc "show commit") [C.P.](# "Chris Palmer") Washer now uses `sweep.scad` instead of including it, leaking its interface.
+
+### [v21.19.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.19.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.18.0...v21.19.0 "diff with v21.18.0")
+*   2024-04-21 [`a5b2018`](https://github.com/nophead/NopSCADlib/commit/a5b20180083ba8d3014bc298cf0e28c20e6be437 "show commit") [C.P.](# "Chris Palmer") Added `offset_paths()` to `sweep.scad`.
+`show_path()` now takes an optional radius.
+
+### [v21.18.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.18.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.17.0...v21.18.0 "diff with v21.17.0")
+*   2024-03-14 [`19dadcb`](https://github.com/nophead/NopSCADlib/commit/19dadcb58db0dd7408726c69d46cf2b7b26c764b "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2024-03-14 [`c565f29`](https://github.com/nophead/NopSCADlib/commit/c565f2912e7319575fc6ec3262699b73305c46b4 "show commit") [V.](# "V.Shkriabets") Update MT3608 pcb module
+
+### [v21.17.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.17.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.16.1...v21.17.0 "diff with v21.16.1")
+*   2024-03-14 [`5579c0d`](https://github.com/nophead/NopSCADlib/commit/5579c0d988c6d7983d3884afa7e42fdb283109a8 "show commit") [C.P.](# "Chris Palmer") Fixed `box_shelf_bracket()` horizontal holes.
+Added a third child to `box_shelf_bracket()` to allow custom additions.
+
+*   2024-03-14 [`67408f8`](https://github.com/nophead/NopSCADlib/commit/67408f8422918416c617ec7389dbc09b2c62a2ae "show commit") [C.P.](# "Chris Palmer") Added `d_hole()` module.
+
+*   2024-03-14 [`929abbe`](https://github.com/nophead/NopSCADlib/commit/929abbefda2c380b121c775371f197860c6c3aff "show commit") [C.P.](# "Chris Palmer") Updated front page image.
+
+*   2024-03-14 [`c7727e7`](https://github.com/nophead/NopSCADlib/commit/c7727e7106e3829a6b5f6c501b1a082d540a4a68 "show commit") [C.P.](# "Chris Palmer") Added Sellotape to sheets.
+
+*   2024-03-14 [`1dbba5a`](https://github.com/nophead/NopSCADlib/commit/1dbba5a650f8dac2d05a5668008e61a5ec22ea4f "show commit") [C.P.](# "Chris Palmer") Added `camera_lens_height()` function.
+
+#### [v21.16.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.16.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.16.0...v21.16.1 "diff with v21.16.0")
+*   2024-03-14 [`db2a9a8`](https://github.com/nophead/NopSCADlib/commit/db2a9a8a24966f098d4c0c8157de98a885b79a85 "show commit") [C.P.](# "Chris Palmer") Ziptie test can now show wires with t `=` 0.
+
+*   2024-03-14 [`6ced9c8`](https://github.com/nophead/NopSCADlib/commit/6ced9c871c5a637dbe8494836a4233e1f6cd4971 "show commit") [C.P.](# "Chris Palmer") Fixed FOV for ESP32 camera being rotated.
+Shortened the ESP32 camera header pins.
+
+*   2024-03-14 [`d6b00fb`](https://github.com/nophead/NopSCADlib/commit/d6b00fbf5719239adc5e8b66f863c003a50806d3 "show commit") [C.P.](# "Chris Palmer") Removed unused test code.
+
+*   2024-03-14 [`2c996bb`](https://github.com/nophead/NopSCADlib/commit/2c996bb7a143a85c21833a69f56f2f47afabe072 "show commit") [C.P.](# "Chris Palmer") Fixed random error caused by not running bom first.
+
+### [v21.16.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.16.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.15.0...v21.16.0 "diff with v21.15.0")
+*   2024-02-19 [`fdb92ec`](https://github.com/nophead/NopSCADlib/commit/fdb92ec263d60a42e04f06abfeec5e1648a12b6b "show commit") [C.P.](# "Chris Palmer") Improved layout to fit into front page view.
+
+*   2024-02-18 [`f6404b9`](https://github.com/nophead/NopSCADlib/commit/f6404b939f714b3121dc6e9737cc24f3b9c64ebb "show commit") [J.R.](# "Jeroen Roos") Added T-Tracks and accessories
+
+### [v21.15.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.15.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.14.0...v21.15.0 "diff with v21.14.0")
+*   2024-02-19 [`30c67e7`](https://github.com/nophead/NopSCADlib/commit/30c67e742bb3603fa41b41e1a144989947e58ad7 "show commit") [C.P.](# "Chris Palmer") Updated the front page image.
+
+*   2024-02-12 [`efb1153`](https://github.com/nophead/NopSCADlib/commit/efb1153e2245fa67193cd7b49ac0926239c3b703 "show commit") [J.R.](# "Jeroen Roos") Add threaded inserts
+
+### [v21.14.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.14.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.13.1...v21.14.0 "diff with v21.13.1")
+*   2024-02-18 [`63a4271`](https://github.com/nophead/NopSCADlib/commit/63a4271c4c1bc97e93e67e8178515be1cfda9e43 "show commit") [C.P.](# "Chris Palmer") Updated libtest image.
+
+*   2024-02-18 [`0edf3a2`](https://github.com/nophead/NopSCADlib/commit/0edf3a2f75d729aa663836878d278226e7bd8094 "show commit") [C.P.](# "Chris Palmer") Cable clips can now handle up to 9 wires, have the nut and bolt flipped or use an insert.
+`cable_radius()` now handles cables with up to 20 wires.
+`cable_bundle()` and `cable_bundle_positions()` now handle bundles up to 9 wires.
+Added `cable_merge()`.
+
+#### [v21.13.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.13.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.13.0...v21.13.1 "diff with v21.13.0")
+*   2024-02-10 [`8540e04`](https://github.com/nophead/NopSCADlib/commit/8540e04a10d83be4ff454fa8999614e5137dd0ab "show commit") [C.P.](# "Chris Palmer") Metal hex pillars now chamfered.
+
 ### [v21.13.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.13.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.12.0...v21.13.0 "diff with v21.12.0")
 *   2024-02-10 [`7947810`](https://github.com/nophead/NopSCADlib/commit/79478104d6b3a8673ae405606d2576ad98c4e90e "show commit") [C.P.](# "Chris Palmer") Dome option added to nut to draw acorn nuts.
 Chamfers added to nuts and hex head screws when manifold is used.

examples/PT_camera/PT_camera.scad

@@ -0,0 +1,54 @@
+include <../../vitamins/geared_steppers.scad>
+include <../../core.scad>
+include <../../vitamins/cameras.scad>
+use <../../vitamins/pcb.scad>
+
+module ptc(ang2) {
+  rotate([180,0,0])
+    union(){
+      geared_stepper(28BYJ_48,ang2);
+      rotate([90,0,180-ang2])
+        translate([9.8,-16.5,1.7])
+          rotate([0,0,90])
+            camera(cameras[0]);
+    }
+}
+
+module pt(ang,ang2) {
+  rotate([180,0,0]) geared_stepper(28BYJ_48,ang);
+  rotate([0,0,ang]) rotate([270,0,0]) translate([0,-29.0,-1.5]) ptc(ang2);
+}
+
+deg=90;
+c=90;
+
+if($t<0.125){
+  a=180+$t/0.125*deg;
+  pt(a,c);
+}else if ($t<0.25){
+  a=180+deg-($t-0.125)/0.125*deg;
+  pt(a,c);
+}else if ($t<0.375){
+  b=c+($t-0.25)/0.125*deg;
+  pt(180,b);
+}else if ($t<0.5){
+  b=c+deg-($t-0.375)/0.125*deg;
+  pt(180,b);
+}   
+else if($t<0.625){
+  a=180+($t-0.5)/0.125*deg;
+  b=c+deg-90+($t-0.5)/0.125*deg;
+  pt(a,b);
+}else if ($t<0.75){
+  a=180+deg-($t-0.625)/0.125*deg;
+  b=c+deg-($t-0.625)/0.125*deg;
+  pt(a,b);
+}else if ($t<0.875){
+  a=180-($t-0.75)/0.125*deg;
+  b=c-($t-0.75)/0.125*deg;
+  pt(a,b);
+}else{
+  a=90+($t-0.875)/0.125*deg;
+  b=c+deg-180+($t-0.875)/0.125*deg;
+  pt(a,b);
+}   

gallery/readme.md

@@ -106,6 +106,10 @@ A base and shroud to make PSU safe to sit on a desk
 
 ![](PSU_tube.png)
 
+## PT_camera
+Two 28BYJ_48 geared stepper motors and a Raspberry v1 camera, combined with [4 drops of superglue](https://forums.raspberrypi.com/viewtopic.php?p=1810000#p1810000). Script [PT_camera.scad](../examples/PT_camera/PT_camera.scad) nicely demonstrates new 2nd optional arg (motor shaft angle) of ```geared_stepper()```.  
+![](PT_camera.anim.gif)
+
 ## PotBox
 Potentiometer box with course and fine controls and three 4mm binding posts
 

lib.scad

@@ -97,6 +97,7 @@ use <utils/hanging_hole.scad>
 use <utils/fillet.scad>
 use <utils/rounded_polygon.scad>
 use <utils/rounded_triangle.scad>
+use <utils/splines.scad>
 use <utils/layout.scad>
 use <utils/round.scad>
 use <utils/offset.scad>

libtest.scad

@@ -112,6 +112,7 @@ use <tests/stepper_motors.scad>
 use <tests/Swiss_clips.scad>
 use <tests/toggles.scad>
 use <tests/transformers.scad>
+use <tests/ttracks.scad>
 use <tests/tubings.scad>
 use <tests/veroboard.scad>
 use <tests/washers.scad>
@@ -220,15 +221,12 @@ translate([950, box_y])
     box_test();
 
 
-translate([950, 1525])
-    rotate(-90)
-        bbox_test();
-
 inserts_y = 0;
 nuts_y = inserts_y + 20;
 washers_y = nuts_y + 140;
 screws_y = washers_y + 120;
-circlips_y = screws_y + 180;
+threaded_inserts_y = screws_y + 180;
+circlips_y = threaded_inserts_y + 30;
 springs_y = circlips_y + 20;
 o_rings_y = springs_y;
 sealing_strip_y = springs_y + 20;
@@ -246,6 +244,10 @@ fans_y = displays_y + 110;
 transformers_y = fans_y + 120;
 psus_y = transformers_y + 190;
 
+ttracks_y = pcbs_y + 150;
+translate([840, ttracks_y])
+    ttracks();
+
 translate([x0 + 35, inserts_y])
     inserts();
 
@@ -258,6 +260,9 @@ translate([x0, nuts_y])
 translate([x0, washers_y])
     washers();
 
+translate([x0, threaded_inserts_y])
+    threaded_inserts();
+
 translate([x0, screws_y])
     screws();
 
@@ -467,6 +472,9 @@ translate([370, transformers_y])
 translate([x4, transformers_y])
     no_explode() socket_boxes();
 
+translate([950, transformers_y + 110])
+    rotate(-90)
+        bbox_test();
 
 belts_y = 0;
 rails_y = belts_y + 200;

printed/box.scad

@@ -494,6 +494,7 @@ module box_shelf_screw_positions(type, screw_positions, thickness = 0, wall = un
         for(p = screw_positions)
             multmatrix(p)
                 translate_z(thickness)
+                    let($horizontal = true)
                         children();
 
     r = box_boss_r(type);
@@ -503,10 +504,11 @@ module box_shelf_screw_positions(type, screw_positions, thickness = 0, wall = un
             for(x = [-1, 1], y = [-1, 1])
                 translate([x * (box_width(type) / 2 - inset), y * (box_depth(type) / 2 - inset)])
                     rotate(45 * x * (2 + y))
+                        let($horizontal = false)
                             children();
 }
 
-module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a shelf bracket, the first optional child is a 2D cutout and the second 3D cutouts
+module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a shelf bracket, the first optional child is a 2D cutout and the second 3D cutouts, third child is 3D additions.
     w = is_undef(wall) ? box_wall(type) : wall;
     insert = box_shelf_insert(type);
     lip = 2 * insert_boss_radius(insert, w);
@@ -561,9 +563,13 @@ module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a
                                     children(0);
                     }
 
-                hflip()
+                hflip() {
                     box_shelf_screw_positions(type, screw_positions, 0, w)
                         boss();
+
+                    if($children > 2)
+                        children(2);
+                }
             }
             if($children > 1)
                 hflip()
@@ -571,7 +577,7 @@ module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a
 
             hflip()
                 box_shelf_screw_positions(type, screw_positions, 0, w)
-                    insert_hole(insert, counterbore = 1, horizontal = true);
+                    insert_hole(insert, counterbore = 1, horizontal = $horizontal);
         }
 }
 

printed/cable_clip.scad

@@ -18,29 +18,43 @@
 //
 
 //
-//! Cable clips to order. Can be for one or two cables of different sizes.
+//! Cable clips to order. Can be for one or two cables of different sizes. Can use an insert and a screw from below or a screw and nut, nyloc or plain, either way up.
 //
 include <../core.scad>
 use <../vitamins/wire.scad>
 use <../utils/fillet.scad>
+use <../vitamins/insert.scad>
 
 wall = 2;
 
-function cable_clip_width(screw) = max(wall + 2 * screw_clearance_radius(screw) + wall, washer_diameter(screw_washer(screw))); //! Width given the `screw`.
-function cable_clip_height(cable) = cable_height(cable) + wall; //! Height given the `cable`.
-function cable_clip_extent(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) + wall; //! How far it extends from the screw.
-function cable_clip_offset(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) / 2; //! The offset of the cable from the screw
+function cable_clip_insert(screw, insert = true) = //! Insert type for clip, given screw.
+    is_list(insert) ? insert : insert ? screw_insert(screw, true) : false;
 
-module single_cable_clip(screw, cable, h = 0) {
-    screw_dia = 2 * screw_clearance_radius(screw);
-    height = cable_clip_width(screw);
-    depth = h ? h : cable_height(cable) + wall;
+function cable_clip_width(screw, insert = false, nut = false) = //! Width given the `screw` and possibly insert or nut.
+    let(insert = cable_clip_insert(screw, insert))
+        insert ? 2 * (insert_hole_radius(insert) + wall) :
+            nut ? 2 * (nut_radius(screw_nut(screw)) + wall) :
+                max(wall + 2 * screw_clearance_radius(screw) + wall, washer_diameter(screw_washer(screw)));
+
+function cable_clip_height(cable, screw = false, insert = false, nut = false) = //! Height given the `cable`.
+    let(insert = cable_clip_insert(screw, insert))
+        max(cable_height(cable) + wall, insert ? insert_hole_length(insert) + 1 : 0, nut ? nut_trap_depth(screw_nut(screw)) + wall : 0);
+
+function cable_clip_extent(screw, cable, insert = false, nut = false) = cable_clip_width(screw, insert, nut) / 2 + cable_width(cable) + wall; //! How far it extends from the screw.
+function cable_clip_offset(screw, cable, insert = false, nut = false) = cable_clip_width(screw, insert, nut) / 2 + cable_width(cable) / 2; //! The offset of the cable from the screw.
+
+module single_cable_clip(screw, cable, h = 0, insert = false, nut = false) {
+    insert = cable_clip_insert(screw, insert);
+    height = cable_clip_width(screw, insert, nut);
+    depth = h ? h : cable_clip_height(cable, screw, insert, nut);
     w = cable_width(cable);
-    width = wall + w + wall + screw_dia + wall;
-    hole_x = wall + w + wall + screw_dia / 2;
+    width = wall + w + height;
+    hole_x = wall + w + height / 2;
     rad = min(wall + cable_wire_size(cable) / 2, depth / 2);
     r = extrusion_width - eps;
-    translate([-hole_x, 0]) difference() {
+    the_nut = screw_nut(screw);
+    translate([-hole_x, 0])
+        difference() {
             linear_extrude(height)
                 difference() {
                     hull() {
@@ -68,50 +82,73 @@ module single_cable_clip(screw, cable, h = 0) {
                     }
                 }
 
-        translate([hole_x, depth / 2, height / 2])
-            rotate([90,0,0])
-                teardrop_plus(h = depth + 1, r = screw_dia / 2, center = true);
+            translate([hole_x, depth, height / 2])
+                rotate([90, 0, 0])
+                    if(insert)
+                        insert_hole(insert, 10, horizontal = true);
+                    else
+                        if(nut) {
+                            translate_z(depth - wall - nut_trap_depth(the_nut))
+                                nut_trap(screw, the_nut, horizontal = true);
+                            nut_trap(screw, the_nut, horizontal = true);
+                        }
+                        else
+                            teardrop_plus(h = 2 * depth + 1, r = screw_clearance_radius(screw), center = true);
         }
 }
 
 
-module double_cable_clip(screw, cable1, cable2) {
-    h = max(cable_clip_height(cable1), cable_clip_height(cable2));
+module double_cable_clip(screw, cable1, cable2, insert = false, nut = false) {
+    h = max(cable_clip_height(cable1, screw, insert, nut), cable_clip_height(cable2, screw, insert, nut));
     union() {
-        single_cable_clip(screw, cable1, h);
+        single_cable_clip(screw, cable1, h, insert, nut);
 
-        mirror([1,0,0]) single_cable_clip(screw, cable2, h);
+        mirror([1,0,0]) single_cable_clip(screw, cable2, h, insert, nut);
     }
 }
 
-module cable_clip(screw, cable1, cable2 = 0) { //! Create the STL for a single cable or two cable clip
-    function clip_str(screw) = str("cable_clip_", screw_radius(screw) * 20);
+module cable_clip(screw, cable1, cable2 = 0, insert = false, nut = false) { //! Create the STL for a single cable or two cable clip
+    function clip_str(screw) = str("cable_clip_", screw_radius(screw) * 20, insert ? "I" : nut ? "N" : "");
     function cable_str(cable) = str("_", cable_wires(cable), "_", round(cable_wire_size(cable) * 10));
-
-    if(cable2) {
-        stl(str(clip_str(screw), cable_str(cable1), cable_str(cable2)));
-
-        double_cable_clip(screw, cable1, cable2);
-    }
-    else {
-        stl(str(clip_str(screw), cable_str(cable1)));
-
-        single_cable_clip(screw, cable1);
-    }
+    assert(!(insert && nut), "insert and nut mutually exclusive");
+    if(cable2)
+        stl(str(clip_str(screw), cable_str(cable1), cable_str(cable2)))
+            double_cable_clip(screw, cable1, cable2, insert, nut);
+    else
+        stl(str(clip_str(screw), cable_str(cable1)))
+            single_cable_clip(screw, cable1, h = 0, insert = insert, nut = nut);
 }
 
-
-module cable_clip_assembly(screw, thickness, cable1, cable2 = 0) { //! Cable clip with the fasteners
-    height = max(cable_clip_height(cable1), cable2 ? cable_clip_height(cable2) : 0);
+module cable_clip_assembly(screw, thickness, cable1, cable2 = 0, flip = false, insert = false, nut = false, nyloc = true) { //! Cable clip with the fasteners
+    flip = flip || insert || nut;          // Screw must be below if using an insert or nut
+    insert = cable_clip_insert(screw, insert);
+    height = max(cable_clip_height(cable1, screw, insert, nut), cable2 ? cable_clip_height(cable2, screw, insert, nut) : 0);
 
     stl_colour(pp1_colour) render()
-        translate([0, cable_clip_width(screw) / 2]) rotate([90, 0, 0])
-            cable_clip(screw, cable1, cable2);
+        translate([0, cable_clip_width(screw, insert, nut) / 2])
+            rotate([90, 0, 0])
+                cable_clip(screw, cable1, cable2, insert, nut);
 
+    the_nut = screw_nut(screw);
+    screw_len = nut ? screw_length(screw, thickness + wall,   nyloc ? 1 : 2, nyloc = nyloc, nut = !nyloc)
+                    : screw_length(screw, thickness + height, 2, nut = !nyloc && !insert, nyloc = !insert && nyloc, insert = insert);
     translate_z(height)
-        screw_and_washer(screw, screw_length(screw, height + thickness, 2, nyloc = true));
+        if(flip)
+            if(insert)
+                insert(insert);
+            else
+                if(nut)
+                    translate_z(-height + wall)
+                        nut(the_nut, nyloc);
+                else
+                    nut_and_washer(the_nut, nyloc);
+        else
+            screw_and_washer(screw, screw_len);
 
     translate_z(-thickness)
         vflip()
-            nut_and_washer(screw_nut(screw), true);
+            if(flip)
+                screw_and_washer(screw, screw_len, insert || !nyloc);
+            else
+                nut_and_washer(the_nut, nyloc);
 }

printed/camera_housing.scad

@@ -383,9 +383,3 @@ module camera_housing(cam) {
         rotate(90)
             camera_bracket(cam);
 }
-
-cam = rpi_camera_v2;
-if($preview)
-    camera_fastened_assembly(cam, 3);
-else
-    camera_housing(cam);

readme.md

@@ -40,16 +40,16 @@ A list of changes classified as breaking, additions or fixes is maintained in [C
 <tr><td> <a href = "#dip">DIP</a> </td><td> <a href = "#opengrab">Opengrab</a> </td><td> <a href = "#springs">Springs</a> </td><td> <a href = "#led_bezel">LED_bezel</a> </td><td> <a href = "#rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
 <tr><td> <a href = "#d_connectors">D_connectors</a> </td><td> <a href = "#pcb">PCB</a> </td><td> <a href = "#stepper_motors">Stepper_motors</a> </td><td> <a href = "#pcb_mount">PCB_mount</a> </td><td> <a href = "#rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
 <tr><td> <a href = "#displays">Displays</a> </td><td> <a href = "#pcbs">PCBs</a> </td><td> <a href = "#swiss_clips">Swiss_clips</a> </td><td> <a href = "#psu_shroud">PSU_shroud</a> </td><td> <a href = "#sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#psus">PSUs</a> </td><td> <a href = "#terminals">Terminals</a> </td><td> <a href = "#pocket_handle">Pocket_handle</a> </td><td> <a href = "#sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#extrusions">Extrusions</a> </td><td> <a href = "#panel_meters">Panel_meters</a> </td><td> <a href = "#toggles">Toggles</a> </td><td> <a href = "#press_fit">Press_fit</a> </td><td> <a href = "#thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#fans">Fans</a> </td><td> <a href = "#photo_interrupters">Photo_interrupters</a> </td><td> <a href = "#transformers">Transformers</a> </td><td> <a href = "#printed_box">Printed_box</a> </td><td> <a href = "#tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#fastons">Fastons</a> </td><td> <a href = "#pillars">Pillars</a> </td><td> <a href = "#tubings">Tubings</a> </td><td> <a href = "#printed_pulleys">Printed_pulleys</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#fuseholder">Fuseholder</a> </td><td> <a href = "#pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#variacs">Variacs</a> </td><td> <a href = "#ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#gear_motors">Gear_motors</a> </td><td> <a href = "#pin_headers">Pin_headers</a> </td><td> <a href = "#veroboard">Veroboard</a> </td><td> <a href = "#ssr_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#geared_steppers">Geared_steppers</a> </td><td> <a href = "#potentiometers">Potentiometers</a> </td><td> <a href = "#washers">Washers</a> </td><td> <a href = "#screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#green_terminals">Green_terminals</a> </td><td> <a href = "#pulleys">Pulleys</a> </td><td> <a href = "#wire">Wire</a> </td><td> <a href = "#socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#hot_ends">Hot_ends</a> </td><td></td><td> <a href = "#zipties">Zipties</a> </td><td> <a href = "#strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#hygrometer">Hygrometer</a> </td><td></td><td></td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#psus">PSUs</a> </td><td> <a href = "#terminals">Terminals</a> </td><td> <a href = "#pocket_handle">Pocket_handle</a> </td><td> <a href = "#splines">Splines</a> </td><td></td></tr>
+<tr><td> <a href = "#extrusions">Extrusions</a> </td><td> <a href = "#panel_meters">Panel_meters</a> </td><td> <a href = "#toggles">Toggles</a> </td><td> <a href = "#press_fit">Press_fit</a> </td><td> <a href = "#sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#fans">Fans</a> </td><td> <a href = "#photo_interrupters">Photo_interrupters</a> </td><td> <a href = "#transformers">Transformers</a> </td><td> <a href = "#printed_box">Printed_box</a> </td><td> <a href = "#thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#fastons">Fastons</a> </td><td> <a href = "#pillars">Pillars</a> </td><td> <a href = "#ttracks">Ttracks</a> </td><td> <a href = "#printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#fuseholder">Fuseholder</a> </td><td> <a href = "#pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#tubings">Tubings</a> </td><td> <a href = "#ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#gear_motors">Gear_motors</a> </td><td> <a href = "#pin_headers">Pin_headers</a> </td><td> <a href = "#variacs">Variacs</a> </td><td> <a href = "#ssr_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#geared_steppers">Geared_steppers</a> </td><td> <a href = "#potentiometers">Potentiometers</a> </td><td> <a href = "#veroboard">Veroboard</a> </td><td> <a href = "#screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#green_terminals">Green_terminals</a> </td><td> <a href = "#pulleys">Pulleys</a> </td><td> <a href = "#washers">Washers</a> </td><td> <a href = "#socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#hot_ends">Hot_ends</a> </td><td></td><td> <a href = "#wire">Wire</a> </td><td> <a href = "#strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#hygrometer">Hygrometer</a> </td><td></td><td> <a href = "#zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
 </table>
 
 ---
@@ -779,6 +779,11 @@ PCB cameras.
 | `camera_lens_offset(type)` | Offset of the lens center from the PCB centre |
 | `camera_pcb(type)` | The PCB part of the camera |
 
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `camera_lens_height(type)` | The height of the lens stack |
+
 ### Modules
 | Module | Description |
 |:--- |:--- |
@@ -982,6 +987,7 @@ D-connectors. Can be any number of ways, male or female, solder buckets, PCB mou
 | Module | Description |
 |:--- |:--- |
 | `d_connector_holes(type)` | Place children at the screw hole positions |
+| `d_hole(type, h = 0, center = true, clearance = 0.2)` | Make a hole to clear the back of d-connector |
 | `d_pillar()` | Draw a pillar for a D-connector |
 | `d_plug(type, socket = false, pcb = false, idc = false)` | Draw specified D plug, which can be IDC, PCB or plain solder bucket |
 | `d_plug_D(length, width, rad)` | D plug D shape |
@@ -1453,7 +1459,7 @@ Geared tin can steppers
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `geared_stepper(type)` | Draw the specified geared stepper |
+| `geared_stepper(type, angle = 0)` | Draw the specified geared stepper with optional shaft angle. |
 | `geared_stepper_screw_positions(type)` | Place children at the screw positions |
 
 ![geared_steppers](tests/png/geared_steppers.png)
@@ -1703,6 +1709,8 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
 | `insert_ring2_d(type)` | Diameter of the middle ring |
 | `insert_ring3_d(type)` | Diameter of the bottom ring |
 | `insert_screw_diameter(type)` | Screw size |
+| `threaded_insert_chamfer(type)` | Size of the chamfer for threaded inserts |
+| `threaded_insert_pitch(type)` | Pitch of the outer thread for threaded inserts |
 
 ### Functions
 | Function | Description |
@@ -1718,6 +1726,7 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
 | `insert_boss(type, z, wall = 2 * extrusion_width)` | Make a boss to take an insert |
 | `insert_hole(type, counterbore = 0, horizontal = false)` | Make a hole to take an insert, `counterbore` is the extra length for the screw |
 | `insert_lug(insert, wall, counter_bore = 0, extension = 0, corner_r = 0, flying = true)` | Make a flying insert lug, see [ssr_shroud](#Ssr_shroud) |
+| `threaded_insert(type)` | Draw specified threaded insert, for use in wood |
 
 ![inserts](tests/png/inserts.png)
 
@@ -1732,6 +1741,14 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
 |   1 | `insert(CNCKM4)` |  Heatfit insert M4 x 4mm |
 |   1 | `insert(F1BM4)` |  Heatfit insert M4 x 8.2mm |
 |   2 | `insert(CNCKM5)` |  Heatfit insert M5 x 5.8mm |
+|   1 | `threaded_insert(M10x25)` |  Threaded insert M10 x 25mm |
+|   1 | `threaded_insert(M12x30)` |  Threaded insert M12 x 30mm |
+|   1 | `threaded_insert(M16x30)` |  Threaded insert M16 x 30mm |
+|   1 | `threaded_insert(M3x8)` |  Threaded insert M3 x 8mm |
+|   1 | `threaded_insert(M4x10)` |  Threaded insert M4 x 10mm |
+|   1 | `threaded_insert(M5x12)` |  Threaded insert M5 x 12mm |
+|   1 | `threaded_insert(M6x15)` |  Threaded insert M6 x 15mm |
+|   1 | `threaded_insert(M8x18)` |  Threaded insert M8 x 18mm |
 
 
 <a href="#top">Top</a>
@@ -2651,6 +2668,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `potentiometer(BTT_encoder)` |  BTT_encoder |
 |   1 | `box_header(2p54header, 4, 2)` |  Box header 4 x 2 |
 |   1 | `box_header(2p54header, 4, 2, right_angle = true)` |  Box header 4 x 2 right angle  |
+|   1 | `rd_disc(6p4mm_disc, "100n")` |  Ceramic capacitor, 6p4mm_disc 100n |
 |   1 | `rd_xtal(ACT1100, "40MHz")` |  Crystal ACT1100 40MHz |
 |   1 | `rd_xtal(ACT1700, "80MHz")` |  Crystal ACT1700 80MHz |
 |   1 | `rd_xtal(C_002RX, "60KHz")` |  Crystal C_002RX 60KHz |
@@ -2658,14 +2676,15 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `rd_xtal(HC49_4H, "10MHz")` |  Crystal HC49_4H 10MHz |
 |   1 | `d_plug(DCONN9, pcb = true)` |  D-type 9 way PCB mount plug |
 |   1 | `dil_socket(12, 15.24)` |  DIL socket 24 x 0.6" |
-|   1 | `smd_diode(DO214AC)` |  DO214AC package SS34 |
+|   1 | `smd_diode(DO214AC, "SS34")` |  DO214AC package SS34 |
 |   2 | `ax_diode(DO_41, "1N4007")` |  Diode 1N4007 |
 |   2 | `ax_diode(DO_35, "1N4148")` |  Diode 1N4148 |
+|   1 | `rd_electrolytic(ECAP8x12, "220uF35V")` |  Electolytic capacitor ECAP8x12 220uF35V |
 |   1 | `hdmi(hdmi_full)` |  HDMI socket |
 |   1 | `pdip(24, 27C32, w = 15.24)` |  IC 27C32 PDIP24 |
 |   1 | `pdip(8, NE555)` |  IC NE555 PDIP8 |
 |   1 | `idc_transition(2p54header, 5)` |  IDC transition header 5 x 2 |
-|   1 | `smd_inductor(IND2525)` |  IND2525 package 4R7 |
+|   1 | `smd_inductor(IND2525 ,"4R7")` |  IND2525 package 4R7 |
 |   1 | `jst_xh_header(jst_ph_header, 2)` |  JST PH connector 2 way |
 |   1 | `jst_xh_header(jst_xh_header, 2)` |  JST XH connector 2 way |
 |   1 | `jst_xh_header(jst_zh_header, 2)` |  JST ZH connector 2 way |
@@ -2686,40 +2705,42 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pin_socket(2p54header, 6, 1)` |  Pin socket 6 x 1 |
 |   2 | `pin_socket(2p54header, 8, 1)` |  Pin socket 8 x 1 |
 |   1 | `rd_transistor(TO92, "78L05")` |  Regulator TO92 78L05 |
+|   1 | `rd_module(HF33F, "012-HSL-3F")` |  Relay HF33F / 012-HSL-3F |
 |   1 | `ax_res(res1_2, 10, tol = 10)` |  Resistor 10 Ohms 10% 0.5W |
 |   1 | `ax_res(res1_4, 100, tol = 2)` |  Resistor 100 Ohms 2% 0.25W |
 |   1 | `ax_res(res1_8, 1000)` |  Resistor 1000 Ohms 5% 0.125W |
 |   1 | `ax_res(res1_4, 10000)` |  Resistor 10000 Ohms 5% 0.25W |
 |   1 | `ax_res(res1_2, 100000)` |  Resistor 100000 Ohms 5% 0.5W |
 |   1 | `ax_res(res1_8, 1e+6, tol = 1)` |  Resistor 1e+6 Ohms 1% 0.125W |
-|   1 | `smd_led(LED0603, orange)` |  SMD LED 0603 orange |
-|   1 | `smd_led(LED0805, red)` |  SMD LED 0805 red |
-|   1 | `smd_led(LED1206, blue)` |  SMD LED 1306 blue |
-|   1 | `smd_tant(TANT_A)` |  SMD Tantalum capacitor package A ,1uF, 2.5V |
-|   1 | `smd_tant(TANT_B)` |  SMD Tantalum capacitor package B ,10uF, 10V |
-|   1 | `smd_tant(TANT_C)` |  SMD Tantalum capacitor package C ,100uF, 16V |
-|   1 | `smd_capacitor(CAP0402)` |  SMD capacitor 0402 10nF |
-|   1 | `smd_capacitor(CAP0502)` |  SMD capacitor 0502 10nF |
-|   1 | `smd_capacitor(CAP0603)` |  SMD capacitor 0603 10nF |
-|   1 | `smd_capacitor(CAP0805)` |  SMD capacitor 0805 100nF |
-|   1 | `smd_capacitor(CAP1206)` |  SMD capacitor 1206 1uF |
-|   1 | `smd_qfp(QFP50P1200X1200X160_64N)` |  SMD chip: ATSAM4S4BA, package : QFP50P1200X1200X160_64N |
+|   1 | `smd_led(LED0603, "orange")` |  SMD LED 0603 orange |
+|   1 | `smd_led(LED0805, "red")` |  SMD LED 0805 red |
+|   1 | `smd_led(LED1206, "blue")` |  SMD LED 1306 blue |
+|   1 | `smd_tant(TANT_A, value = "105e")` |  SMD Tantalum capacitor package A ,1uF, 2.5V |
+|   1 | `smd_tant(TANT_B, value = "106A")` |  SMD Tantalum capacitor package B ,10uF, 10V |
+|   1 | `smd_tant(TANT_C, value = "107C")` |  SMD Tantalum capacitor package C ,100uF, 16V |
+|   1 | `smd_capacitor(CAP0402, value = "10nF")` |  SMD capacitor 0402 10nF |
+|   1 | `smd_capacitor(CAP0502, value = "10nF")` |  SMD capacitor 0502 10nF |
+|   1 | `smd_capacitor(CAP0603, value = "10nF")` |  SMD capacitor 0603 10nF |
+|   1 | `smd_capacitor(CAP0805, value = "100nF")` |  SMD capacitor 0805 100nF |
+|   1 | `smd_capacitor(CAP1206, value = "1uF")` |  SMD capacitor 1206 1uF |
+|   1 | `smd_qfp(QFP50P1200X1200X160_64N, "ATSAM4S4BA")` |  SMD chip: ATSAM4S4BA, package : QFP50P1200X1200X160_64N |
 |   1 | `smd_resistor(L2012C, 1u)` |  SMD choke 0805 1u |
 |   1 | `smd_coax(U_FL_R_SMT_1)` |  SMD coax connector type: U_FL_R_SMT_1 |
+|   1 | `smd_250V_fuse(OMT250, "2A 250V")` |  SMD fuse: OMT250 2A 250V |
 |   1 | `smd_resistor(RES0402, 1)` |  SMD resistor 0402 1 0.0625W |
 |   1 | `smd_resistor(RES0502, 10)` |  SMD resistor 0502 10 0.05W |
 |   1 | `smd_resistor(RES0603, 100)` |  SMD resistor 0603 100 0.1W |
 |   1 | `smd_resistor(RES0805, 1K)` |  SMD resistor 0805 1K 0.125W |
 |   1 | `smd_resistor(RES1206, 1M)` |  SMD resistor 1206 1M 0.25W |
-|   1 | `smd_soic(SOIC14)` |  SOIC14 package 74HC00 |
-|   1 | `smd_soic(SOIC16)` |  SOIC16 package ICL323 |
-|   1 | `smd_soic(SOIC18)` |  SOIC18 package PIC18F88 |
-|   1 | `smd_soic(SOIC8)` |  SOIC8 package M34063 |
-|   1 | `smd_sot(SOT223)` |  SOT223 package LM117 |
-|   1 | `smd_sot(SOT23)` |  SOT23 package 2N7000 |
+|   1 | `smd_soic(SOIC14, "74HC00")` |  SOIC14 package 74HC00 |
+|   1 | `smd_soic(SOIC16, "ICL323")` |  SOIC16 package ICL323 |
+|   1 | `smd_soic(SOIC18, "PIC18F88")` |  SOIC18 package PIC18F88 |
+|   1 | `smd_soic(SOIC8, "M34063")` |  SOIC8 package M34063 |
+|   1 | `smd_sot(SOT223, "LM117")` |  SOT223 package LM117 |
+|   1 | `smd_sot(SOT23, "2N7000")` |  SOT23 package 2N7000 |
 |   1 | `square_button(button_4p5mm)` |  Square button 4.5mm |
 |   1 | `square_button(button_6mm)` |  Square button 6mm |
-|   1 | `smd_pot(TC33X1)` |  TC33X1 package 10K |
+|   1 | `smd_pot(TC33X1, "10K")` |  TC33X1 package 10K |
 |   1 | `pcb(TMC2130)` |  TMC2130 |
 |   1 | `green_terminal(gt_5p08, 2)` |  Terminal block 2 way 0.2" |
 |   2 | `green_terminal(gt_6p35, 2)` |  Terminal block 2 way 0.25" |
@@ -2732,11 +2753,14 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `terminal_35(4)` |  Terminal block 4 way 3.5mm |
 |   1 | `pcb(test_pcb)` |  Test PCB |
 |   1 | `rd_transistor(E_LINE, "ZTX853")` |  Transistor E_LINE ZTX853 |
+|   1 | `rd_disc(ERZV07D471, "471")` |  Varistor, ERZV07D471 471 |
 |   2 | `vero_pin()` |  Vero board pin |
 |   1 | `wire_link(0.8, 5.08, h = 10.16)` |  Wire link 0.8mm x 0.2" |
 |   1 | `wire_link(0.8, 10.16)` |  Wire link 0.8mm x 0.4" |
 |   1 | `wire_link(0.8, 10.16, h = 0.75, sleeve = [1.5, "red"])` |  Wire link 0.8mm x 0.4" with red sleeving |
 |   1 | `wire_link(0.8, 0, h = 5)` |  Wire link 0.8mm x 8mm |
+|   1 | `rd_boxc(BOXC18x5x11, "X2 rated film capacitor", "0.1uF 250V" )` |  X2 rated film capacitor 0.1uF 250V |
+|   1 | `rd_boxc(BOXC18x10x16, "X2 rated film capacitor", "0.47uF 250V" )` |  X2 rated film capacitor 0.47uF 250V |
 
 
 <a href="#top">Top</a>
@@ -2867,6 +2891,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(Melzi)` |  Melzi electronics - not shown |
 |   6 |  |  Micro SD card |
 |   1 |  |  Micro SD card - not shown |
+|   1 | `pcb(RCWL-0516)` |  Microwave Radar Sensor |
 |   1 | `molex_254(2)` |  Molex KK header 2 way - not shown |
 |   1 | `molex_254(3)` |  Molex KK header 3 way - not shown |
 |  20 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
@@ -2894,8 +2919,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   8 | `screw(M2_cap_screw, 20)` |  Screw M2 cap x 20mm |
 |   4 | `screw(M2_cap_screw, 25)` |  Screw M2 cap x 25mm |
 |   2 | `screw(M2p5_cap_screw, 20)` |  Screw M2.5 cap x 20mm |
-|   4 | `screw(M2p5_cap_screw, 25)` |  Screw M2.5 cap x 25mm |
-|   4 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
+|   8 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
 |  12 | `screw(M2p5_cap_screw, 35)` |  Screw M2.5 cap x 35mm |
 |   4 | `screw(M2p5_dome_screw, 25)` |  Screw M2.5 dome x 25mm |
 |   4 | `screw(M2p5_pan_screw, 20)` |  Screw M2.5 pan x 20mm |
@@ -2903,8 +2927,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |  19 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
 |  13 | `screw(M3_cap_screw, 20)` |  Screw M3 cap x 20mm |
 |   4 | `screw(M3_cap_screw, 25)` |  Screw M3 cap x 25mm |
-|   8 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
-|   3 | `screw(M3_cap_screw, 35)` |  Screw M3 cap x 35mm |
+|  11 | `screw(M3_cap_screw, 35)` |  Screw M3 cap x 35mm |
 |   4 | `screw(M4_cap_screw, 20)` |  Screw M4 cap x 20mm |
 |   4 | `screw(M4_cap_screw, 25)` |  Screw M4 cap x 25mm |
 |   1 | `pcb(XIAO)` |  Seeeduino XIAO |
@@ -2924,24 +2947,24 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | Qty | Filename |
 | ---:|:--- |
 |   4 | pcb_spacer20100.stl |
-|   4 | pcb_spacer20140.stl |
+|   4 | pcb_spacer20150.stl |
 |   4 | pcb_spacer2070.stl |
 |   4 | pcb_spacer2080.stl |
 |   4 | pcb_spacer2090.stl |
-|   2 | pcb_spacer25100.stl |
-|   4 | pcb_spacer25130.stl |
-|   4 | pcb_spacer25160.stl |
+|   2 | pcb_spacer25110.stl |
+|   4 | pcb_spacer25140.stl |
 |   4 | pcb_spacer25170.stl |
-|   4 | pcb_spacer25180_2.stl |
+|   4 | pcb_spacer25180.stl |
 |   4 | pcb_spacer25190_2.stl |
-|   4 | pcb_spacer25230.stl |
+|   4 | pcb_spacer25200_2.stl |
 |   4 | pcb_spacer25240.stl |
 |   4 | pcb_spacer25250.stl |
+|   4 | pcb_spacer25260.stl |
 |   4 | pcb_spacer2580.stl |
-|   4 | pcb_spacer30120.stl |
-|   4 | pcb_spacer30200.stl |
+|   4 | pcb_spacer30130.stl |
 |   4 | pcb_spacer30210.stl |
-|   3 | pcb_spacer30220.stl |
+|   4 | pcb_spacer30220.stl |
+|   3 | pcb_spacer30230.stl |
 |  10 | pcb_spacer3050.stl |
 |   9 | pcb_spacer3060.stl |
 |   9 | pcb_spacer3070.stl |
@@ -3383,6 +3406,11 @@ Radial components for PCBs.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| `rd_boxc_colours(type)` | Case colour and resin fill colour |
+| `rd_boxc_leads(type)` | Lead pitch, diameter and length |
+| `rd_boxc_size(type)` | Overall size and corner radius |
+| `rd_boxc_skirt(type)` | Skirt slot, thickness, height |
+| `rd_boxc_z(type)` | Height of inner base above PCB. |
 | `rd_disc_colours(type)` | Colours of body and text |
 | `rd_disc_kind(type)` | Capacitor, etc |
 | `rd_disc_lead_d(type)` | Lead diameter and sleeve diameter |
@@ -3412,6 +3440,7 @@ Radial components for PCBs.
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `rd_box_cap(type, kind, value)` | Draw radial boxed film capacitor |
 | `rd_disc(type, value, pitch = undef, z = 0, tail = 3)` | Draw a radial disc component |
 | `rd_electrolytic(type, value, pitch = undef, z = 0, tail = 3)` | Draw a radial electrolytic capcacitor |
 | `rd_module(type, value)` | Draw a PCB mounted potted module, e.g. PSU or relay |
@@ -3437,6 +3466,8 @@ Radial components for PCBs.
 |   1 | `rd_transistor(E_LINE, "ZTX853")` |  Transistor E_LINE ZTX853 |
 |   1 | `rd_transistor(TO92, "BC337")` |  Transistor TO92 BC337 |
 |   1 | `rd_disc(ERZV07D471, "470V")` |  Varistor, ERZV07D471 470V |
+|   1 | `rd_boxc(BOXC18x5x11, "X2 rated film capacitor", "0.1uF 250V" )` |  X2 rated film capacitor 0.1uF 250V |
+|   1 | `rd_boxc(BOXC18x10x16, "X2 rated film capacitor", "0.47uF 250V" )` |  X2 rated film capacitor 0.47uF 250V |
 
 
 <a href="#top">Top</a>
@@ -4022,6 +4053,7 @@ When woven sheets (e.g. carbon fibre) are rendered it is necessary to specify th
 |   1 | `sheet(Spring08, 30, 30, 2)` |  Bi-metal saw blade 30mm x 30mm x 0.8mm |
 |   1 | `sheet(Cardboard, 30, 30, 2)` |  Corrugated cardboard 30mm x 30mm x 5mm |
 |   1 | `sheet(Foam20, 30, 30, 2)` |  Foam sponge 30mm x 30mm x 20mm |
+|   1 | `sheet(Sellotape, 30, 30, 2)` |  Sellotape tape 30mm x 30mm x 0.05mm |
 |   1 | `sheet(DiBond, 30, 30, 2)` |  Sheet DiBond 30mm x 30mm x 3mm |
 |   1 | `sheet(DiBond6, 30, 30, 2)` |  Sheet DiBond 30mm x 30mm x 6mm |
 |   1 | `sheet(MDF10, 30, 30, 2)` |  Sheet MDF 30mm x 30mm x 10mm |
@@ -4130,6 +4162,10 @@ E.g. 475A is 4.7uF 10V on the parts list.
 ### Properties
 | Function | Description |
 |:--- |:--- |
+| `smd_250V_fuse_base(type)` | Base length |
+| `smd_250V_fuse_size(type)` | Bounding box of the body |
+| `smd_250V_fuse_step(type)` | End cutout length, width and height |
+| `smd_250V_fuse_z(type)` | Height of body above the PCB surface |
 | `smd_cap_end_cap(type)` | End cap width |
 | `smd_cap_size(type)` | Body length, width |
 | `smd_coax_base_r(type)` | Corner radius of the base |
@@ -4194,6 +4230,7 @@ E.g. 475A is 4.7uF 10V on the parts list.
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `smd_250V_fuse(type, value)` | Draw an SMD mains fuse |
 | `smd_capacitor(type, height, value = undef)` | Draw an SMD capacitor with specified height |
 | `smd_coax(type)` | Draw an SMD coaxial connector |
 | `smd_diode(type, value)` | Draw an SMD diode |
@@ -4211,37 +4248,39 @@ E.g. 475A is 4.7uF 10V on the parts list.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `smd_diode(DO214AC)` |  DO214AC package SS34 |
-|   1 | `smd_inductor(IND2525)` |  IND2525 package 4R7 |
-|   1 | `smd_led(LED0603, green)` |  SMD LED 0603 green |
-|   1 | `smd_led(LED0805, blue)` |  SMD LED 0805 blue |
-|   1 | `smd_led(LED1206, red)` |  SMD LED 1306 red |
-|   1 | `smd_tant(TANT_A)` |  SMD Tantalum capacitor package A ,1uF, 2.5V |
-|   1 | `smd_tant(TANT_B)` |  SMD Tantalum capacitor package B ,10uF, 6.3V |
-|   1 | `smd_tant(TANT_C)` |  SMD Tantalum capacitor package C ,100uF, 10V |
+|   1 | `smd_inductor(CDRH104 ,"10R")` |  CDRH104 package 10R |
+|   1 | `smd_diode(DO214AC, "SS34")` |  DO214AC package SS34 |
+|   1 | `smd_inductor(IND2525 ,"4R7")` |  IND2525 package 4R7 |
+|   1 | `smd_led(LED0603, "green")` |  SMD LED 0603 green |
+|   1 | `smd_led(LED0805, "blue")` |  SMD LED 0805 blue |
+|   1 | `smd_led(LED1206, "red")` |  SMD LED 1306 red |
+|   1 | `smd_tant(TANT_A, value = "105e")` |  SMD Tantalum capacitor package A ,1uF, 2.5V |
+|   1 | `smd_tant(TANT_B, value = "106J")` |  SMD Tantalum capacitor package B ,10uF, 6.3V |
+|   1 | `smd_tant(TANT_C, value = "107A")` |  SMD Tantalum capacitor package C ,100uF, 10V |
 |   1 | `smd_capacitor(CAP0402)` |  SMD capacitor 0402 |
 |   1 | `smd_capacitor(CAP0502)` |  SMD capacitor 0502 |
 |   1 | `smd_capacitor(CAP0603)` |  SMD capacitor 0603 |
 |   1 | `smd_capacitor(CAP0805)` |  SMD capacitor 0805 |
 |   1 | `smd_capacitor(CAP1206)` |  SMD capacitor 1206 |
 |   1 | `smd_capacitor(CAP1210)` |  SMD capacitor 1210 |
-|   1 | `smd_qfp(QFP50P1200X1200X160_64N)` |  SMD chip: ATSAM4S4BA, package : QFP50P1200X1200X160_64N |
+|   1 | `smd_qfp(QFP50P1200X1200X160_64N, "ATSAM4S4BA")` |  SMD chip: ATSAM4S4BA, package : QFP50P1200X1200X160_64N |
 |   1 | `smd_resistor(L2012C, 10u)` |  SMD choke 0805 10u |
 |   1 | `smd_coax(U_FL_R_SMT_1)` |  SMD coax connector type: U_FL_R_SMT_1 |
+|   1 | `smd_250V_fuse(OMT250, "2A 250V")` |  SMD fuse: OMT250 2A 250V |
 |   1 | `smd_resistor(RES0402, 1R0)` |  SMD resistor 0402 1R0 0.0625W |
 |   1 | `smd_resistor(RES0502, 10)` |  SMD resistor 0502 10 0.05W |
 |   1 | `smd_resistor(RES0603, 100)` |  SMD resistor 0603 100 0.1W |
 |   1 | `smd_resistor(RES0805, 10M)` |  SMD resistor 0805 10M 0.125W |
 |   1 | `smd_resistor(RES1206, 100K)` |  SMD resistor 1206 100K 0.25W |
-|   1 | `smd_soic(SOIC14)` |  SOIC14 package SOIC14 |
-|   1 | `smd_soic(SOIC16)` |  SOIC16 package SOIC16 |
-|   1 | `smd_soic(SOIC18)` |  SOIC18 package SOIC18 |
-|   1 | `smd_soic(SOIC8)` |  SOIC8 package SOIC8 |
-|   1 | `smd_sot(SOT223)` |  SOT223 package FZT851 |
-|   1 | `smd_sot(SOT23)` |  SOT23 package 2N7000 |
-|   1 | `smd_soic(SOT23_6)` |  SOT23_6 package SOT23_6 |
-|   1 | `smd_pot(TC33X1)` |  TC33X1 package 10K |
-|   1 | `smd_soic(TSOT23_8)` |  TSOT23_8 package TSOT23_8 |
+|   1 | `smd_soic(SOIC14, "SOIC14")` |  SOIC14 package SOIC14 |
+|   1 | `smd_soic(SOIC16, "SOIC16")` |  SOIC16 package SOIC16 |
+|   1 | `smd_soic(SOIC18, "SOIC18")` |  SOIC18 package SOIC18 |
+|   1 | `smd_soic(SOIC8, "SOIC8")` |  SOIC8 package SOIC8 |
+|   1 | `smd_sot(SOT223, "FZT851")` |  SOT223 package FZT851 |
+|   1 | `smd_sot(SOT23, "2N7000")` |  SOT23 package 2N7000 |
+|   1 | `smd_soic(SOT23_6, "SOT23_6")` |  SOT23_6 package SOT23_6 |
+|   1 | `smd_pot(TC33X1, "10K")` |  TC33X1 package 10K |
+|   1 | `smd_soic(TSOT23_8, "TSOT23_8")` |  TSOT23_8 package TSOT23_8 |
 
 
 <a href="#top">Top</a>
@@ -4673,12 +4712,86 @@ Iron core transformers. The grey shaded area is the keep out region where the te
 |   1 | `transformer(SMALLTX)` |  Transformer Small mains |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="ttracks"></a>
+## Ttracks
+T-Tracks used in woodworking jigs
+
+[vitamins/ttracks.scad](vitamins/ttracks.scad) Object definitions.
+
+[vitamins/ttrack.scad](vitamins/ttrack.scad) Implementation.
+
+[tests/ttracks.scad](tests/ttracks.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `t_insert_description(type)` | Description of this t-track insert |
+| `t_insert_height(type)` | Height of t-track insert |
+| `t_insert_thread(type)` | M thread for this the screw hole in this insert |
+| `t_insert_top_thickness(type)` | Top thickness for t-track insert |
+| `t_insert_top_width(type)` | Top Width of t-track insert |
+| `t_insert_width(type)` | Width of t-track insert |
+| `tbolt_description(type)` | Description of this t-track bolt |
+| `tbolt_head_length(type)` | Head length for t-track bolt |
+| `tbolt_head_thickness(type)` | Head thickness for t-track bolt |
+| `tbolt_head_width(type)` | Head width for t-track bolt |
+| `tbolt_thread(type)` | M thread for this bolt |
+| `ttrack_fixture(type)` | Fixture, such as T-bolt or Miter insert used with this track |
+| `ttrack_height(type)` | Height of track section |
+| `ttrack_opening(type)` | Width of the opening |
+| `ttrack_screw(type)` | Screw used to fasten track |
+| `ttrack_screw_pitch(type)` | Distance between screws |
+| `ttrack_slot_height(type)` | Height of the slot |
+| `ttrack_slot_width(type)` | Width of the slot |
+| `ttrack_top_thickness(type)` | Thickness of the top layer |
+| `ttrack_width(type)` | Width of track section |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `ttrack_holes(type, length)` | Number of holes in a rail given its `length` |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `ttrack(type, length, colour = "LightSlateGray")` | Draw the specified rail |
+| `ttrack_hole_positions(type, length)` | Position children over screw holes |
+| `ttrack_place_bolt(type, pos, bolt = undef)` | Place a T-Bolt relative to the centre of the track |
+| `ttrack_place_insert(type, pos, insert = undef)` | Place a T-Insert relative to the centre of the track |
+
+![ttracks](tests/png/ttracks.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   3 | `screw(M3_cs_cap_screw, 15)` |  Screw M3 cs cap x 15mm |
+|   3 | `screw(M4_cs_cap_screw, 15)` |  Screw M4 cs cap x 15mm |
+|   2 | `screw(M6_hex_screw, 15)` |  Screw M6 hex x 15mm |
+|   1 | `ttrack(ttrack_mitre_30mm, 120)` |  T-Track ttrack_mitre_30mm x 120mm |
+|   1 | `ttrack(ttrack_mitre_30mm, 200)` |  T-Track ttrack_mitre_30mm x 200mm |
+|   1 | `ttrack(ttrack_mitre_36mm, 120)` |  T-Track ttrack_mitre_36mm x 120mm |
+|   1 | `ttrack(ttrack_universal_19mm, 120)` |  T-Track ttrack_universal_19mm x 120mm |
+|   1 | `ttrack(ttrack_universal_19mm, 200)` |  T-Track ttrack_universal_19mm x 200mm |
+|   1 | `ttrack(ttrack_universal_19mm_A, 120, colour="red")` |  T-Track ttrack_universal_19mm_A x 120mm |
+|   1 | `ttrack(ttrack_universal_19mm_B, 120, colour="blue")` |  T-Track ttrack_universal_19mm_B x 120mm |
+|   1 | `T-Track Bolt M6` | M6 x 30mm |
+|   1 | `T-Track Bolt M6 with small head` | M6 x 30mm |
+|   3 | `T-Track Bolt M8` | M8 x 30mm |
+|   1 | `ttrack_insert(TTrack_insert_Miter30_M6, 30, 1)` | T-Track insert, Miter track 30mm, M6 thread, M30mm, with 1 M6 |
+|   1 | `ttrack_insert(TTrack_insert_Miter30_M6, 30, 1, colour="red")` | T-Track insert, Miter track 30mm, M6 thread, M30mm, with 1 M6 |
+|   1 | `ttrack_insert(TTrack_insert_Miter30_M6, 60, 2, colour="red")` | T-Track insert, Miter track 30mm, M6 thread, M60mm, with 2 M6 |
+|   1 | `ttrack_insert(TTrack_insert_Miter30_M8, 30, 1, colour="red")` | T-Track insert, Miter track 30mm, M8 thread, M30mm, with 1 M8 |
+
+
 <a href="#top">Top</a>
 
 ---
 <a name="tubings"></a>
 ## Tubings
-Tubing and sleeving. The internal diameter can be forced to stretch it over something.
+Tubing and sleeving. The internal diameter can be forced to stretch it over something. A path can be specified, otherwise it is just straight with the specified length.
 
 [vitamins/tubings.scad](vitamins/tubings.scad) Object definitions.
 
@@ -4703,7 +4816,7 @@ Tubing and sleeving. The internal diameter can be forced to stretch it over some
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `tubing(type, length = 15, forced_id = 0, center = true)` | Draw specified tubing with optional forced internal diameter |
+| `tubing(type, length = 15, forced_id = 0, center = true, path = [])` | Draw specified tubing with optional forced internal diameter and optional path. |
 
 ![tubings](tests/png/tubings.png)
 
@@ -4968,6 +5081,7 @@ Utilities for adding wires to the BOM and optionally drawing them and cable bund
 | `cable_bundle_positions(cable)` | Positions of wires in a bundle to go through a cable strip |
 | `cable_height(cable)` | Height in flat clip |
 | `cable_is_ribbon(cable)` | Is a ribbon cable? |
+| `cable_merge(cable1, cable2)` | Combine the wires of two cables |
 | `cable_radius(cable)` | Radius of a bundle of wires, see <http://mathworld.wolfram.com/CirclePacking.html>. |
 | `cable_tlen(cable)` | Twisted cable twist length |
 | `cable_twisted_radius(cable)` | Approximate radius of a cable when twisted |
@@ -5113,7 +5227,7 @@ The top bezel can have an optional child, which is subtracted to allow modificat
 | `box_right(type)` | Default right side, can be overridden to customise |
 | `box_right_blank(type, sheet = false)` | Generates a 2D template for the right sheet, `sheet` can be set to override the type |
 | `box_shelf_blank(type, sheet = false, wall = undef)` | Generates a 2D template for a shelf sheet |
-| `box_shelf_bracket(type, screw_positions, wall = undef)` | Generates a shelf bracket, the first optional child is a 2D cutout and the second 3D cutouts |
+| `box_shelf_bracket(type, screw_positions, wall = undef)` | Generates a shelf bracket, the first optional child is a 2D cutout and the second 3D cutouts, third child is 3D additions. |
 | `box_shelf_bracket_section(type, rows, cols, x, y)` | Generates sections of the shelf bracket to allow it to be bigger than the printer |
 | `box_shelf_screw_positions(type, screw_positions, thickness = 0, wall = undef, top_screws = true)` | Place children at the shelf screw positions |
 | `box_top(type)` | Default top, can be overridden to customise |
@@ -5271,7 +5385,7 @@ fixing_blocks along the sides.
 ---
 <a name="cable_clip"></a>
 ## Cable_clip
-Cable clips to order. Can be for one or two cables of different sizes.
+Cable clips to order. Can be for one or two cables of different sizes. Can use an insert and a screw from below or a screw and nut, nyloc or plain, either way up.
 
 [printed/cable_clip.scad](printed/cable_clip.scad) Implementation.
 
@@ -5280,35 +5394,41 @@ Cable clips to order. Can be for one or two cables of different sizes.
 ### Functions
 | Function | Description |
 |:--- |:--- |
-| `cable_clip_extent(screw, cable)` | How far it extends from the screw. |
-| `cable_clip_height(cable)` | Height given the `cable`. |
-| `cable_clip_offset(screw, cable)` | The offset of the cable from the screw |
-| `cable_clip_width(screw)` | Width given the `screw`. |
+| `cable_clip_extent(screw, cable, insert = false, nut = false)` | How far it extends from the screw. |
+| `cable_clip_height(cable, screw = false, insert = false, nut = false)` | Height given the `cable`. |
+| `cable_clip_insert(screw, insert = true)` | Insert type for clip, given screw. |
+| `cable_clip_offset(screw, cable, insert = false, nut = false)` | The offset of the cable from the screw. |
+| `cable_clip_width(screw, insert = false, nut = false)` | Width given the `screw` and possibly insert or nut. |
 
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `cable_clip(screw, cable1, cable2 = 0)` | Create the STL for a single cable or two cable clip |
-| `cable_clip_assembly(screw, thickness, cable1, cable2 = 0)` | Cable clip with the fasteners |
+| `cable_clip(screw, cable1, cable2 = 0, insert = false, nut = false)` | Create the STL for a single cable or two cable clip |
+| `cable_clip_assembly(screw, thickness, cable1, cable2 = 0, flip = false, insert = false, nut = false, nyloc = true)` | Cable clip with the fasteners |
 
 ![cable_clip](tests/png/cable_clip.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
+|   2 | `insert(CNCKM3)` |  Heatfit insert M3 x 3mm |
 |   5 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
-|   2 | `screw(M3_dome_screw, 12)` |  Screw M3 dome x 12mm |
+|   3 | `screw(M3_dome_screw, 10)` |  Screw M3 dome x 10mm |
+|   1 | `screw(M3_dome_screw, 12)` |  Screw M3 dome x 12mm |
 |   3 | `screw(M3_dome_screw, 16)` |  Screw M3 dome x 16mm |
-|  10 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+|  11 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+|   2 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
 
 ### Printed
 | Qty | Filename |
 | ---:|:--- |
-|   1 | cable_clip_30_10_13.stl |
+|   1 | cable_clip_30I_10_13.stl |
+|   1 | cable_clip_30I_5_14_6_14.stl |
+|   1 | cable_clip_30N_7_14_8_14.stl |
 |   1 | cable_clip_30_1_14_2_14.stl |
 |   1 | cable_clip_30_1_60.stl |
 |   1 | cable_clip_30_3_14_4_14.stl |
-|   1 | cable_clip_30_5_14_6_14.stl |
+|   1 | cable_clip_30_9_14.stl |
 
 
 <a href="#top">Top</a>
@@ -5388,7 +5508,8 @@ Housings for PCB cameras.
 |   1 | `camera(rpi_camera_v1)` |  Raspberry Pi camera V1 |
 |   1 | `camera(rpi_camera_v2)` |  Raspberry Pi camera V2 |
 |   1 | `camera(rpi_camera)` |  Raspberry Pi focusable camera |
-|   7 | `screw(M2_cap_screw, 10)` |  Screw M2 cap x 10mm |
+|   3 | `screw(M2_cap_screw, 8)` |  Screw M2 cap x  8mm |
+|   4 | `screw(M2_cap_screw, 10)` |  Screw M2 cap x 10mm |
 |   4 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
 |   4 | `screw(M3_dome_screw, 10)` |  Screw M3 dome x 10mm |
 |   2 | `screw(M3_dome_screw, 12)` |  Screw M3 dome x 12mm |
@@ -7319,6 +7440,32 @@ A sector of a circle between two angles.
 ![sector](tests/png/sector.png)
 
 
+<a href="#top">Top</a>
+
+---
+<a name="splines"></a>
+## Splines
+Cubic splines that interpolate between a list of 2D points passing through all of them.
+Translated from the Python version at <https://community.alteryx.com/t5/Engine-Works/Creating-a-Cubic-Spline-in-Python-and-Alteryx/ba-p/581173>.
+Note the x values of the points must be strictly increasing.
+
+Catmull-Rom splines are well behaved but the ends points are control points and the curve only goes from the second point to the penultimate point.
+Coded from <https://en.wikipedia.org/wiki/Centripetal_Catmull%E2%80%93Rom_spline#Code_example_in_Python>.
+No restrictions on points and they can be 3D.
+
+[utils/splines.scad](utils/splines.scad) Implementation.
+
+[tests/splines.scad](tests/splines.scad) Code for this example.
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `catmull_rom_spline(points, n, alpha = 0.5)` | Interpolate n new points between the specified points with a Catmull-Rom spline, alpha = 0.5 for centripetal, 0 for uniform and 1 for chordal. |
+| `cubic_spline(points, N = 100)` | Interpolate the list of points given to produce N points on a cubic spline that passes through points given. |
+
+![splines](tests/png/splines.png)
+
+
 <a href="#top">Top</a>
 
 ---
@@ -7351,6 +7498,7 @@ Each vertex, apart from the first and the last, has an associated radius and the
 | `cap(facets, segment = 0, end)` | Create the mesh for an end cap |
 | `circle_points(r = 1, z = 0, dir = -1)` | Generate the points of a circle, setting z makes a single turn spiral |
 | `helical_twist_per_segment(r, pitch, sides)` | Calculate the twist around Z that rotate_from_to() introduces |
+| `offset_paths(path, offsets, twists = 0)` | Create new paths offset from the original, optionally spiralling around it |
 | `rectangle_points(w, h)` | Generate the points of a rectangle |
 | `rounded_path(path)` | Convert a rounded_path, consisting of a start coordinate, vertex / radius pairs and then an end coordinate, to a path of points for sweep. |
 | `rounded_path_vertices(path)` | Show the unrounded version of a rounded_path for debug |
@@ -7362,7 +7510,7 @@ Each vertex, apart from the first and the last, has an associated radius and the
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `show_path(path)` | Show a path using a chain of hulls for debugging, duplicate points are highlighted. |
+| `show_path(path, r = 0.1)` | Show a path using a chain of hulls for debugging, duplicate points are highlighted. |
 | `sweep(path, profile, loop = false, twist = 0, convexity = 1)` | Draw a polyhedron that is the swept volume |
 
 ![sweep](tests/png/sweep.png)

scripts/changelog.py

@@ -169,6 +169,9 @@ if __name__ == '__main__':
 
             # Print commits excluding merges
 
-            if not c.comment.startswith('Merge branch') and not c.comment.startswith('Merge pull') and not re.match(r'U.?.ated ch.*log.*', c.comment):
+            if not c.comment.startswith('Merge branch') \
+               and not c.comment.startswith('Merge pull') \
+               and not re.match(r'U.?.ated ch.*log.*', c.comment) \
+               and not re.match(r'Changelog updated.*', c.comment):
                 print('* %s [`%s`](%s "show commit") %s %s\n' % (c.date, c.hash[:7], url + '/commit/' + c.hash, initials(c.author), fixup_comment(c.comment, url)), file = file)
     do_cmd(('codespell -w -L od ' + filename).split())

scripts/deps.py

@@ -63,5 +63,5 @@ def source_dirs(bom_dir):
         else:
             if dir.endswith('/printed'):
                 lib_dirs.add(dir)
-    dirs.remove(source_dir)
+    dirs.discard(source_dir)
     return [source_dir] + sorted(dirs) + sorted(lib_dirs)

tests/PCB.scad

@@ -61,7 +61,7 @@ test_pcb = ["test_pcb", "Test PCB",
     // components
     [
         [ 20, -5,  180, "trimpot10"],
-        [ 20, -15,  90, "trimpot10", true],
+        [ 20, -18,  90, "trimpot10", true],
         [ 19,  2,   90, "smd_led", LED1206, "blue"],
         [ 16,  2,   90, "smd_led", LED0805, "red"],
         [ 13,  2,   90, "smd_led", LED0603, "orange"],
@@ -82,6 +82,7 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 32,  3,  -90, "smd_diode",DO214AC, "SS34"],
         [ 26,  2,  -90, "smd_pot", TC33X1, "10K"],
         [ 26,  6,  -90, "smd_coax",U_FL_R_SMT_1],
+        [  8, 23,    0, "smd_250V_fuse", OMT250, "2A 250V"],
 
         [ 26, 10,  -90, "smd_sot", SOT23, "2N7000"],
         [ 28, 16,  -90, "smd_sot", SOT223, "LM117"],
@@ -116,8 +117,8 @@ test_pcb = ["test_pcb", "Test PCB",
         [  5, 220, 180, "hdmi"],
         [  3, 235, 180, "mini_hdmi"],
         [ 38, 190, -90, "text", 25, 4, "Silkscreen", "Liberation Sans:style=Bold"],
-        [ 25, 200,   0, "buzzer", 4.5, 8.5],
-        [ 25, 218,   0, "buzzer"],
+        [ 25, 205,   0, "buzzer", 4.5, 8.5],
+        [ 25, 220,   0, "buzzer"],
 
         [ 45,   1,   0, "link", inch(0.4), 0.75, undef, undef, [1.5, "red"]], // Sleeved link
         [ 45,   3,   0, "link", inch(0.4)], // Flat link
@@ -130,6 +131,10 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 35,  17,   0, "vero_pin", true],
         [ 35,   8, 180, "rd_transistor", TO92, "78L05", undef,  undef, "Regulator"],
         [ 35,  13, 180, "rd_transistor", E_LINE, "ZTX853"],
+        [ 25, 190,   0, "rd_electrolytic", ECAP8x11, "220uF35V"],
+        [ 25, 180,  90, "rd_disc",  ERZV07D471, "471"],
+        [ 25, 170,  90, "rd_disc", 6p4mm_disc, "100n"],
+        [ 90, 135, -90, "rd_module", HF33F, "012-HSL-3F"],
         [ 35,   3,   0, "link", 0, 5], // Vertical wire
 
         [ 60,   3,   0, "link", inch(0.2), inch(0.4)], // Raised link
@@ -147,6 +152,9 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 30,  130,-90, "rd_xtal", ACT1100, "40MHz", 0.5 ],
         [ 30,  150,-90, "rd_xtal", ACT1700, "80MHz", 0.5 ],
 
+        [ 93,  230,-90, "rd_box_cap", BOXC18x10x16, "X2 rated film capacitor", "0.47uF 250V" ],
+        [ 93,  210,-90, "rd_box_cap", BOXC18x5x11,  "X2 rated film capacitor", "0.1uF 250V" ],
+
         [ 77,  15, -90, "flex"],
         [ 95,  15, -90, "flat_flex"],
         [ 87,  15, -90, "flat_flex", true],
@@ -179,7 +187,7 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 55, 170,   0, "button_4p5mm"],
         [ 50, 185,   0, "microswitch", small_microswitch],
         [ 52, 200,   0, "pcb", 11, TMC2130 ],
-        [ 80, 210,   0, "pdip", 24, "27C32", true, inch(0.6) ],
+        [ 76, 210,   0, "pdip", 24, "27C32", true, inch(0.6) ],
         [ 80, 180,   0, "pdip", 8, "NE555" ],
         [ 71, 180,    0, "smd_inductor", IND2525, "4R7"],
 

tests/SMDs.scad

@@ -64,10 +64,15 @@ module smds() {
             let(s = smd_soics[$i])
                 smd_soic(s, s[0]);
 
-    translate([0, 39])
+    translate([0, 36.5])
+        layout([for(i = smd_250V_fuses) smd_250V_fuse_size(i).x], 1)
+            let(i = smd_250V_fuses[$i])
+                smd_250V_fuse(i, "2A 250V");
+
+    translate([0, 45])
         layout([for(i = smd_inductors) smd_inductor_leads(i).x], 1)
             let(i = smd_inductors[$i])
-                smd_inductor(i, "4R7");
+                smd_inductor(i, ["4R7", "10R"][$i % 2]);
 
     translate([20, 6])
          layout([for(q = smd_qfps) smd_qfp_body_size(q).x], 3)

tests/cable_clip.scad

@@ -20,39 +20,46 @@
 include <../core.scad>
 use <../printed/cable_clip.scad>
 use <../vitamins/wire.scad>
+use <../utils/layout.scad>
 
-
+screw = M3_dome_screw;
 sheet_thickness = 3;
 
 cables = [
-    for(i = [1 : 6]) [i, 1.4], [1, 6], 0, [10, inch(0.05), true], 0
+    [10, inch(0.05), true], 0, for(i = [1 : 9]) [i, 1.4], 0,  [1, 6], 0,
 ];
 
-screw = M3_dome_screw;
+clips = [for(i = [0 : ceil(len(cables) / 2) - 1]) let(c1= cables[2 * i], c2 = cables[2 * i + 1]) [c1, c2]];
 
+function use_insert(i) = in([0, 3], i);
+function use_nut(i)    = in([4],    i);
+
+clip_lengths = [for(i = [0 : len(clips) - 1])
+    let(c = clips[i], c1 = c.x, c2 = c.y, ins = use_insert(i), nut = use_nut(i))
+        cable_clip_extent(screw, c1, insert = ins, nut = nut) + (c2 ? cable_clip_extent(screw, c2, insert = ins, nut = nut) : cable_clip_width(screw, insert = ins, nut = nut) / 2)];
 
 module cable_clips() {
-    for(i = [0 : ceil(len(cables) / 2) - 1])
-        translate([i * 25, 0]) {
-            cable1 = cables[2 * i];
-            cable2 = cables[2 * i + 1];
-
+    layout(clip_lengths, 3, true) let(cable1 = clips[$i].x, cable2 = clips[$i].y) {
+        insert = use_insert($i);
+        nut = use_nut($i);
+        translate([cable_clip_extent(screw, cable1, insert = insert, nut = nut) - clip_lengths[$i] / 2, 0]) {
             if($preview) {
-                cable_clip_assembly(screw, sheet_thickness, cable1, cable2);
+                cable_clip_assembly(screw, sheet_thickness, cable1, cable2, insert = insert, nut = nut, flip = $i == 1);
 
                 for(j = [0 : 1])
-                    let(cable = cables[2 * i + j])
+                    let(cable = clips[$i][j])
                         if(cable)
                             let(positions = cable_bundle_positions(cable))
                                 for(i = [0 : len(positions) - 1])
                                     let(p = positions[i])
-                                        translate([p.x + [-1, 1][j] * cable_clip_offset(screw, cable), 0, p.y])
+                                        translate([p.x + [-1, 1][j] * cable_clip_offset(screw, cable, insert = insert, nut = nut), 0, p.y])
                                             rotate([90, 0, 0])
                                                 color([grey(20), "blue", "red", "orange", "yellow", "green", "brown", "purple", "grey", "white"][i])
                                                     cylinder(d = cable_wire_size(cable), h = 30, center = true);
             }
             else
-                cable_clip(screw, cable1, cable2);
+                cable_clip(screw, cable1, cable2, insert = insert);
+        }
     }
 }
 

tests/inserts.scad

@@ -22,7 +22,6 @@ use <../utils/layout.scad>
 include <../vitamins/inserts.scad>
 
 module inserts() {
-
     for(i = [0: len(inserts) -1])
         translate([10 * i, 5])
             insert(inserts[i]);
@@ -32,7 +31,6 @@ module inserts() {
             insert(short_inserts[i]);
 
 
-
     stl_colour(pp1_colour)
         translate([len(inserts) * 10, 0]) {
             insert_lug(inserts[0], 2, 1);
@@ -42,6 +40,17 @@ module inserts() {
         }
 }
 
+module threaded_inserts()
+    for(i = [0: len(threaded_inserts) -1]) {
+        d = insert_hole_radius(threaded_inserts[i]);
+        translate([(10 + d) * i, 0])
+            threaded_insert(threaded_inserts[i]);
+    }
+
 if($preview)
-    let($show_threads = true)
+    let($show_threads = true) {
         inserts();
+
+        translate([0, 20])
+            threaded_inserts();
+    }

tests/radials.scad

@@ -28,10 +28,14 @@ module radials() {
         pcb_grid(pcb, 10, 12)
             rd_module(rd_modules[2], "12V 900ma");
 
-        for(i = [0: len(rd_electrolytics) - 1])
+        for(i = [0 : len(rd_electrolytics) - 1])
             pcb_grid(pcb, i * 3, 2)
                 rotate(-90)
                     rd_electrolytic(rd_electrolytics[i], "220uF35V", z = 3, pitch = inch(0.2));
+
+        for(i = [0 : len(rd_box_caps) - 1])
+            pcb_grid(pcb, 20, i * 4)
+                rd_box_cap(rd_box_caps[i], "X2 rated film capacitor", ["0.1uF 250V", "0.47uF 250V"][i]);
     }
 
     $solder = pcb_solder(pcb);

tests/splines.scad

@@ -0,0 +1,38 @@
+//
+// NopSCADlib Copyright Chris Palmer 2024
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../utils/core/core.scad>
+
+use <../utils/splines.scad>
+use <../utils/sweep.scad>
+
+points = [[0, 1.5], [2, 2], [3, 1], [4, -2], [5, 1], [6, 2], [7, 3]];
+
+module splines() {
+    cm_spline = catmull_rom_spline(points, 100 / len(points), 0.5);
+    color("green") show_path(cm_spline, 0.01);
+
+    cu_spline = cubic_spline(points, 100);
+    color("blue") show_path(cu_spline, 0.01);
+
+    for(p = points)
+        translate(p) color("red")
+            cylinder($fn = 64, r = 0.03, h = 0.02, center = true);
+}
+
+rotate([70, 0, 315]) splines();

tests/ttracks.scad

@@ -0,0 +1,73 @@
+//
+// NopSCADlib Copyright Chris Palmer 2024
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../utils/core/core.scad>
+use <../utils/layout.scad>
+use <../utils/maths.scad>
+
+include <../vitamins/ttracks.scad>
+
+module ttracks() {
+    colours = [ "LightSlateGray", "red", "blue", "LightSlateGray", "LightSlateGray" ];
+    gap = 8;
+    widths = [for(t = ttracks) ttrack_width(t)];
+    translate([0, 60])
+        layout(widths, gap) {
+            ttrack(ttracks[$i], 120, colours[$i]);
+
+            if($i < len(ttrack_bolts))
+                translate([0, -80])
+                    ttrack_bolt(ttrack_bolts[$i], 30);
+
+            let(i = $i - len(ttrack_bolts))
+                if(i >= 0 && i < len(ttrack_inserts))
+                    translate([0, -85])
+                        rotate(90)
+                            ttrack_insert(ttrack_inserts[i], 30, colour=colours[i]);
+        }
+
+    x = sumv(widths) + len(ttracks) * gap + ttrack_width(ttrack_universal_19mm) / 2;
+    translate([x, 20]) {
+        ttrack_assembly(ttrack_universal_19mm, 200);
+        ttrack_place_bolt(ttrack_universal_19mm, 50)
+            ttrack_bolt(ttrack_fixture(ttrack_universal_19mm), 30);
+
+        ttrack_place_bolt(ttrack_universal_19mm, -60)
+            ttrack_bolt(ttrack_fixture(ttrack_universal_19mm), 30);
+    }
+
+    x2 = x + ttrack_width(ttrack_universal_19mm) / 2 + gap + ttrack_width(ttrack_mitre_30mm) / 2;
+    translate([x2, 20]) {
+        ttrack_assembly(ttrack_mitre_30mm, 200);
+
+        ttrack_place_insert(ttrack_mitre_30mm, 50)
+            ttrack_insert(ttrack_fixture(ttrack_mitre_30mm), 30, 1, "red");
+
+        ttrack_place_insert(ttrack_mitre_30mm, -60) {
+            ttrack_insert(ttrack_fixture(ttrack_mitre_30mm), 60, 2, "red");
+            ttrack_insert_hole_positions(ttrack_fixture(ttrack_mitre_30mm), 60, 2)
+                translate_z(8)
+                    screw(M6_hex_screw, 15);
+        }
+    }
+
+}
+
+if($preview)
+    let($show_threads = true)
+        ttracks();

tests/zipties.scad

@@ -17,7 +17,7 @@
 // If not, see <https://www.gnu.org/licenses/>.
 //
 wire_r = 5; // [1 : 20]
-t = 0; // [0 : 3]
+t = -1; // [-1 : 3]
 
 include <../utils/core/core.scad>
 use <../utils/layout.scad>
@@ -26,9 +26,9 @@ include <../vitamins/zipties.scad>
 
 module zipties()
     layout([for(z = zipties) 9], 2 * wire_r) {
-        ziptie(zipties[$i], wire_r, t);
+        ziptie(zipties[$i], wire_r, max(t, 0));
 
-        if(t)
+        if(t >= 0)
             color(grey(20))
                 cylinder(r = wire_r, h = 10, center = true);
 

utils/splines.scad

@@ -0,0 +1,101 @@
+//
+// NopSCADlib Copyright Chris Palmer 2024
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Cubic splines that interpolate between a list of 2D points passing through all of them.
+//! Translated from the Python version at <https://community.alteryx.com/t5/Engine-Works/Creating-a-Cubic-Spline-in-Python-and-Alteryx/ba-p/581173>.
+//! Note the x values of the points must be strictly increasing.
+//!
+//! Catmull-Rom splines are well behaved but the ends points are control points and the curve only goes from the second point to the penultimate point.
+//! Coded from <https://en.wikipedia.org/wiki/Centripetal_Catmull%E2%80%93Rom_spline#Code_example_in_Python>.
+//! No restrictions on points and they can be 3D.
+//
+include <../utils/core/core.scad>
+
+use <maths.scad>
+use <sweep.scad>
+
+function cubic_spline(points, N = 100) = let( //! Interpolate the list of points given to produce N points on a cubic spline that passes through points given.
+        N = N - 1,
+        n = len(points),
+        ass1 = assert(n >= 3, "must be at least 3 points")0,
+
+        dx = [for(i = [0 : n - 2]) points[i + 1].x - points[i].x], // x deltas
+        ass2 = assert(min(dx) > 0, "X must strictly increase")0,
+
+        //
+        // A and C are diagonals above and below the main diagonal B, which is all 2's
+        //
+        A = [for(i = [0 : n - 3]) dx[i] / (dx[i] + dx[i + 1]), 0],
+        C = [0, for(i = [0 : n - 3]) dx[i + 1] / (dx[i] + dx[i + 1]), 0],
+        //
+        // D are the target values on the right hand side of the equation
+        //
+        D = [0, for(i = [1 : n - 2]) 6 * ((points[i + 1].y - points[i].y) / dx[i] - (points[i].y - points[i - 1].y) / dx[i - 1]) / (dx[i] + dx[i - 1]), 0],
+        //
+        // Solve the tridiagonal equation using the Thomas algorithm
+        //
+        c = [for(i = 1, c = 0; i < n; c = C[i] / (2 - c * A[i - 1]), i = i + 1) c, 0],
+        d = [for(i = 1, d = 0; i < n; d = (D[i] - d * A[i - 1]) / (2 - c[i - 1] * A[i - 1]), i = i + 1) d, 0],
+        M = [for(i = n - 2, x = 0; i >= 0; x = d[i] - c[i] * x, i = i - 1) x, 0],
+        //
+        // Calculate the coefficients of each cubic curve
+        //
+        coefficients = [for(i = [0 : n - 2], dx2 = sqr(dx[i]), j = n - 1 - i)
+                            [(M[j - 1] - M[j]) * dx2 / 6,
+                             M[j] * dx2 / 2,
+                             points[i + 1].y - points[i].y - (M[j - 1] + 2 * M[j]) * dx2 / 6,
+                             points[i].y]
+                       ],
+        //
+        // Use the coefficients to interpolate between the points
+        //
+        x0 = points[0].x,
+        x1 = points[n - 1].x,
+        spline = [for(i = 0, j = 0, z = 0, x = x0; i <= N + 1;
+                      x = x0 + (x1 - x0) * i / N,
+                      j = i < N - 1 && x > points[j + 1].x ? j + 1 : j,
+                      z = (x - points[j].x) / dx[j],
+                      i = i + 1,
+                      C = coefficients[j]
+                     ) if(i) [x, (((C[0] * z) + C[1]) * z + C[2]) * z + C[3]]
+                 ]
+    ) spline;
+
+function tj(ti, pi, pj, alpha = 0.5) = ti + pow(norm(pi - pj), alpha);
+
+function catmull_rom_segment(P0, P1, P2, P3, n, alpha = 0.5, last = false) = let(
+        t0 = 0,
+        t1 = tj(t0, P0, P1, alpha),
+        t2 = tj(t1, P1, P2, alpha),
+        t3 = tj(t2, P2, P3, alpha),
+        end = last ? n : n - 1,
+        points  = [for(i = [0 : end], t = t1 + (t2 - t1) * i / n) let(
+            A1 = (t1 - t) / (t1 - t0) * P0 + (t - t0) / (t1 - t0) * P1,
+            A2 = (t2 - t) / (t2 - t1) * P1 + (t - t1) / (t2 - t1) * P2,
+            A3 = (t3 - t) / (t3 - t2) * P2 + (t - t2) / (t3 - t2) * P3,
+            B1 = (t2 - t) / (t2 - t0) * A1 + (t - t0) / (t2 - t0) * A2,
+            B2 = (t3 - t) / (t3 - t1) * A2 + (t - t1) / (t3 - t1) * A3
+        ) (t2 - t) / (t2 - t1) * B1 + (t - t1) / (t2 - t1) * B2]
+    ) points;
+
+
+function catmull_rom_spline(points, n, alpha = 0.5) = let( //! Interpolate n new points between the specified points with a Catmull-Rom spline, alpha = 0.5 for centripetal, 0 for uniform and 1 for chordal.
+        segs = len(points) - 3
+    ) [for(i = [0 : segs - 1]) each catmull_rom_segment(points[i], points[i + 1], points[i + 2], points[i + 3], n, alpha, last = i == segs - 1)];

utils/sweep.scad

@@ -111,7 +111,7 @@ function helical_twist_per_segment(r, pitch, sides) = //! Calculate the twist ar
 //
 // Generate all the transforms for the profile of the swept volume.
 //
-function sweep_transforms(path, loop = false, twist = 0) =
+function sweep_transforms(path, loop = false, twist = 0, initial_rotation = undef) =
     let(len = len(path),
         last = len - 1,
 
@@ -122,7 +122,7 @@ function sweep_transforms(path, loop = false, twist = 0) =
         lengths = [for(i = 0, t = 0; i < len; t = t + norm(path[min(i + 1, last)] - path[i]), i = i + 1) t],
         length = lengths[last],
 
-        rotations = [for(i = 0, rot = fs_frame(tangents);
+        rotations = [for(i = 0, rot = is_undef(initial_rotation) ? fs_frame(tangents) : rot3_z(initial_rotation);
                          i < len;
                          i = i + 1,
                          rot = i < len ? rotate_from_to(tangents[i - 1], tangents[i]) * rot : undef) rot],
@@ -239,6 +239,10 @@ function segmented_path(path, min_segment) = [  //! Add points to a path to enfo
         path[len(path) - 1]
 ];
 
+function offset_paths(path, offsets, twists = 0) = let( //! Create new paths offset from the original, optionally spiralling around it
+        transforms = sweep_transforms(path, twist = 360 * twists, initial_rotation = 0)
+    ) [for(o = offsets) let(initial = [o.x, o.y, o.z, 1]) [for(t = transforms) initial * t]];
+
 function spiral_paths(path, n, r, twists, start_angle) = let( //! Create a new paths which spiral around the given path. Use for making twisted cables
         segment = twists ? path_length(path) / twists / r2sides(2 * r) : inf,
         transforms = sweep_transforms(segmented_path(path, segment), twist = 360 * twists)
@@ -246,16 +250,16 @@ function spiral_paths(path, n, r, twists, start_angle) = let( //! Create a new p
 
 function rounded_path_vertices(path) = [path[0], for(i = [1 : 2 : len(path) - 1]) path[i]]; //! Show the unrounded version of a rounded_path for debug
 
-module show_path(path) //! Show a path using a chain of hulls for debugging, duplicate points are highlighted.
+module show_path(path, r = 0.1) //! Show a path using a chain of hulls for debugging, duplicate points are highlighted.
     for(i = [0 : len(path) - 2]) {
         hull($fn = 16) {
             translate(path[i])
-                sphere(0.1);
+                sphere(r);
 
             translate(path[i + 1])
-                sphere(0.1);
+                sphere(r);
         }
         if(path[i] == path[i + 1])
             translate(path[i])
-                color("red") sphere(1);
+                color("red") sphere($fn = 16, r * 4);
     }

utils/thread.scad

@@ -47,7 +47,7 @@ thread_colour_factor = 0.8; // 60 degree threads appear too bright due to the an
 
 function thread_profile(h, crest, angle, overlap = 0.1) = //! Create thread profile path
     let(base = crest + 2 * (h + overlap) * tan(angle / 2))
-        [[-base / 2, -overlap, 0], [-crest / 2, h, 0], [crest / 2, h, 0], [base / 2, -overlap, 0]];
+        [[-base / 2, -overlap, 0], [-crest / 2, h, 0], if(crest) [crest / 2, h, 0], [base / 2, -overlap, 0]];
 
 module thread(dia, pitch, length, profile, center = true, top = -1, bot = -1, starts = 1, solid = true, female = false, colour = undef) { //! Create male or female thread, ends can be tapered, chamfered or square
     assert(is_undef(colour) || is_list(colour), "Thread colour must be in [r, g, b] form");

vitamins/camera.scad

@@ -30,6 +30,9 @@ function camera_connector_pos(type) = type[5]; //! The flex connector block for
 function camera_connector_size(type)= type[6]; //! The flex connector block for the camera itself's size
 function camera_fov(type)           = type[7]; //! The field of view of the camera lens
 
+function camera_lens_height(type) = //! The height of the lens stack
+     let(lenses = camera_lens(type), lens = lenses[len(lenses) - 1][0]) lens.y + lens.z;
+
 module camera_lens(type, offset = 0, show_lens = true) //! Draw the lens stack, with optional offset for making a clearance hole
     color(grey(20))
         translate(camera_lens_offset(type))

vitamins/cameras.scad

@@ -67,7 +67,8 @@ rpi_camera = ["rpi_camera", "Raspberry Pi focusable camera", rpi_camera_pcb, [0,
         [[0, 0,  12], 6],
         [[0, 11, 4.3], 14 / 2, [8/2, 11/2, 1]],
     ],
-    [0, 18 - 1.5 - 2.5], [8, 5, 1.6]
+    [0, 18 - 1.5 - 2.5], [8, 5, 1.6],
+    [54, 41] // FOV
 ];
 
 esp32_cam_x = 1; // Seems to vary as mine is offset but pictures on the web show it more centered.
@@ -96,7 +97,7 @@ ESP32_module =  ["", "", 18, 26, 0.8,   0, 0.7, [1.1, 1.1, 0, gold], grey(18), f
 ESP32_CAM_pcb = ["", "", 27, 40, 1.7, 2.5, 0, 0, grey(15), false, [],
     [
         [27 / 2, 26 / 2, 0, "-pcb", 0, ESP32_module],
-        for(side = [-1, 1]) [side * inch(0.45) + 27 / 2, -(4.2 + inch(.35)), 0, "-2p54header", 1, 8],
+        for(side = [-1, 1]) [side * inch(0.45) + 27 / 2, -(4.2 + inch(.35)), 0, "-2p54joiner", 1, 8],
         [ 27 / 2, -8, 90, "uSD", [14.85, 14.65, 1.8]],
         [ 27 / 2 + 1, 15, 0, "flat_flex", false],
         [ 27 / 2 + inch(0.45), 10.5, 0, "block", 3, 3, 0.8, grey(90)],
@@ -151,7 +152,7 @@ ESP32_CAM = ["ESP32_CAM", "ESP32-CAM Camera module", ESP32_CAM_pcb, [esp32_cam_x
         [[0, 0, 6.3], 3.5, [1, 1, 0.5]],
     ],
     [1, -4], [15, 2.2, 1],
-    [54, 41] // FOV
+    [41, 54] // FOV
 ];
 
 

vitamins/d_connector.scad

@@ -80,6 +80,13 @@ module d_plug_D(length, width, rad) { //! D plug D shape
                 circle(rad);
 }
 
+module d_hole(type, h = 0, center = true, clearance = 0.2) { //! Make a hole to clear the back of d-connector
+    dwall = 0.5 + clearance;
+
+    extrude_if(h, center)
+        d_plug_D(d_lengths(type)[0] + 2 * dwall, d_widths(type)[0] + 2 * dwall, 2.5 + dwall);
+}
+
 module d_plug(type, socket = false, pcb = false, idc = false) { //! Draw specified D plug, which can be IDC, PCB or plain solder bucket
     hole_r = 3.05 / 2;
     dwall = 0.5;
@@ -106,7 +113,7 @@ module d_plug(type, socket = false, pcb = false, idc = false) { //! Draw specifi
     // Shell
     //
     color(d_plug_shell_colour)  {
-        linear_extrude( d_flange_thickness(type))
+        linear_extrude(d_flange_thickness(type))
             difference() {
                 rounded_square([flange_length, flange_width], 2);
 

vitamins/geared_stepper.scad

@@ -52,7 +52,7 @@ module geared_stepper_screw_positions(type) //! Place children at the screw posi
 motor_colour = "#9BA2AC";
 gearbox_colour = "#FFF7EE";
 
-module geared_stepper(type) { //! Draw the specified geared stepper
+module geared_stepper(type, angle = 0) { //! Draw the specified geared stepper with optional shaft angle.
     vitamin(str("geared_stepper(", type[0], "): Geared stepper - ", type[1]));
 
     radius = gs_diameter(type) / 2;
@@ -125,6 +125,7 @@ module geared_stepper(type) { //! Draw the specified geared stepper
     f = gs_shaft_flat(type);
     two_flats = f < 0;
     vflip()
+        rotate(angle)
             color(two_flats ? brass : gearbox_colour) {
                 d = gs_shaft_d(type);
                 h = gs_shaft_length(type);

vitamins/insert.scad

@@ -32,6 +32,9 @@ function insert_barrel_d(type)       = type[5];     //! Diameter of the main bar
 function insert_ring1_h(type)        = type[6];     //! Height of the top and middle rings
 function insert_ring2_d(type)        = type[7];     //! Diameter of the middle ring
 function insert_ring3_d(type)        = type[8];     //! Diameter of the bottom ring
+function threaded_insert_pitch(type) = type[9];     //! Pitch of the outer thread for threaded inserts
+function threaded_insert_chamfer(type) = type[10];  //! Size of the chamfer for threaded inserts
+
 
 function insert_hole_length(type) = round_to_layer(insert_length(type)); //! Length of the insert rounded to layer height
 
@@ -46,6 +49,14 @@ function insert_nose_length(type, d) = let( //! The length before the second rin
 
 module insert(type) { //! Draw specified insert
     length = insert_length(type);
+
+    vitamin(str("insert(", type[0], "): Heatfit insert M", insert_screw_diameter(type), " x ", length, "mm"));
+
+    base_insert(type);
+}
+
+module base_insert(type) {
+    length = insert_length(type);
     ring1_h = insert_ring1_h(type);
 
     chamfer1 = (insert_ring2_d(type) - insert_barrel_d(type)) / 2;
@@ -53,7 +64,6 @@ module insert(type) { //! Draw specified insert
     ring2_h = ring1_h + chamfer1;
     gap = (length - ring1_h - ring2_h - chamfer2) / 3;
 
-    vitamin(str("insert(", type[0], "): Heatfit insert M", insert_screw_diameter(type), " x ", length, "mm"));
     $fn = 64;
     thread_d = insert_screw_diameter(type);
     explode(20, offset = [0, 0, -length]) translate_z(eps) vflip() {
@@ -186,3 +196,50 @@ module insert_lug(insert, wall, counter_bore = 0, extension = 0, corner_r = 0, f
             }
     }
 }
+
+
+module threaded_insert(type) { //! Draw specified threaded insert, for use in wood
+    d2 = insert_outer_d(type);
+    d3 = insert_barrel_d(type);
+    pitch = threaded_insert_pitch(type);
+
+    profile = thread_profile((d2 - d3) /2 , 0, 60);
+    socket = insert_screw_diameter(type) / cos(30) / 2;
+    length = insert_length(type);
+
+    r=insert_barrel_d(type) / 2;
+    z=threaded_insert_chamfer(type);
+
+    thread_l = insert_length(type) - z; // - insert_ring1_h(type);
+
+    vitamin(str("threaded_insert(", type[0], "): Threaded insert M", insert_screw_diameter(type), " x ", length, "mm"));
+    union() {
+        color(silver)
+            render() difference() {
+                base_insert(type);
+                translate_z(-socket/2 + 0.01)
+                    cylinder(r=socket, $fn = 6, h=socket/2);
+
+                // chamfer the end
+                rotate_extrude(convexity = 3)
+                    polygon([
+                        [r - z, -length],
+                        [r + 0.1, - length],
+                        [r + 0.1, - length + z + 0.1]
+                    ]);
+            }
+
+        translate_z(-thread_l/2)
+            thread(insert_barrel_d(type),
+                pitch,
+                thread_l,
+                profile,
+                center = true,
+                top = 1,
+                bot = -1,
+                starts = 1,
+                solid = false,
+                female = false,
+                colour = silver);
+    }
+}

vitamins/inserts.scad

@@ -39,8 +39,23 @@ CNCKM3 =  [ "CNCKM3",  3.0, 4.6, 4.0, 3,   3.65, 0.7, 4.4, 3.9 ];
 CNCKM4 =  [ "CNCKM4",  4.0, 6.3, 5.6, 4,   5.15, 1.0, 6.0, 5.55];
 CNCKM5 =  [ "CNCKM5",  5.8, 7.1, 6.4, 5,   6.0,  1.6, 6.8, 6.33];
 
+// Measurements according to DIN 7965
+//
+// If you want to add an additional length, it should be sufficient copy one with the same
+// M size and change the name (2x) and the first number column (l), all others are dependent
+// on the M size.
+//                        l,   d2,   d5,  d,   d3,   h,     d3,   d3, P1 (h),    z
+M3x8    = [  "M3x8",      8,    6,    5,  3,   4.5,  0.5,  4.5,  4.5,      2,  0.6];
+M4x10   = [  "M4x10",    10,    8,  6.5,  4,   5.5,  0.5,  5.5,  5.5,    2.5,  0.6];
+M5x12   = [  "M5x12",    12,   10,  8.5,  5,   7.5,  0.5,  7.5,  7.5,    3.5,  0.8];
+M6x15   = [  "M6x15",    15,   12, 10.5,  6,   9.5,  0.5,  9.5,  9.5,      4,    1];
+M8x18   = [  "M8x18",    18,   16, 14.5,  8,  12.5,  0.5, 12.5, 12.5,      5,    1];
+M10x25  = [ "M10x25",    25, 18.5,   17, 10,    15,  0.5,   15,   15,      5,  1.6];
+M12x30  = [ "M12x30",    30,   22,   20, 12,    18,  0.5,   18,   18,      5,  1.6];
+M16x30  = [ "M16x30",    30,   25, 22.5, 16,  20.5,  0.5, 20.5, 20.5,      5,  1.6];
 
 inserts =       [ F1BM2, F1BM2p5,  F1BM3,  F1BM4,  CNCKM5 ];
 short_inserts = [ F1BM2, CNCKM2p5, CNCKM3, CNCKM4, CNCKM5 ];
+threaded_inserts = [ M3x8, M4x10, M5x12, M6x15, M8x18, M10x25, M12x30, M16x30 ];
 
 use <insert.scad>

vitamins/nuts.scad

@@ -20,7 +20,7 @@ include <washers.scad>
 //
 // Nuts
 //
-M2_nut_trap_depth = 2.5;
+M2_nut_trap_depth = 1.75;
 M2p5_nut_trap_depth = 2.5;
 M3_nut_trap_depth = 3;
 M4_nut_trap_depth = 4;

vitamins/pcb.scad

@@ -1169,6 +1169,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
             if(show(comp, "rd_module"))     rd_module(type = comp[4], value = comp[5]);
             if(show(comp, "rd_transistor")) rd_transistor(type = comp[4], value = comp[5], lead_positions = param(6, undef), z = param(7, 5), kind = param(8,"Transistor"));
                                              // type, value, lead positions, z, kind
+            if(show(comp, "rd_box_cap"))    rd_box_cap(type = comp[4], kind = comp[5], value = comp[6]);
             if(show(comp, "link"))          wire_link(l = comp[4], h = param(5, 1), d = param(6, 0.8), tail = param(7, 3), sleeve = param(8, false));
             if(show(comp, "D_plug"))        translate_z(d_pcb_offset(comp[4])) d_plug(comp[4], pcb = true);
             if(show(comp, "molex_hdr"))     molex_254(comp[4], param(5, 0), param(6, undef));
@@ -1177,6 +1178,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
             if(show(comp, "jst_zh"))        jst_xh_header(jst_zh_header, comp[4], param(5, false), param(6, false), param(7, undef));
             if(show(comp, "potentiometer")) let(pot = param(4, BTT_encoder)) translate_z(pot_size(pot).z) vflip() potentiometer(pot, shaft_length = param(5, undef));
             if(show(comp, "buzzer"))        buzzer(param(4, 9), param(5, 12), param(6, grey(20)));
+            if(show(comp, "smd_250V_fuse")) smd_250V_fuse(comp[4], comp[5]);
             if(show(comp, "smd_res"))       smd_resistor(comp[4], comp[5]);
             if(show(comp, "smd_cap"))       smd_capacitor(comp[4], comp[5], param(6, undef));
             if(show(comp, "smd_tant"))      smd_tant(comp[4], param(5, undef));

vitamins/pcbs.scad

@@ -730,7 +730,6 @@ Keyes5p1 = ["Keyes5p1", "Keyes5.1 Arduino Uno expansion board", 68.58, 53.34, 1.
     M2p5_pan_screw
    ];
 
-
 ExtruderPCB = ["ExtruderPCB", "Extruder connection PCB",
                                     33.02, 24.13, 1.6, 0,   0,   0, "green", true, [],
     [[3 * 1.27, 24.13 / 2, 90, "D_plug", DCONN15],
@@ -761,9 +760,15 @@ ZC_A0591 = ["ZC_A0591", "ZC-A0591 ULN2003 driver PCB", 35, 32, 1.6, 0, 2.5, 0, "
     ], [], [], [], M2p5_pan_screw];
 
 
-MT3608 = ["MT3608", "MT3608 boost converter module",        37, 17, 1.2, 2, 1.5, [5, 3], "#2140BE", false, [[3.0725, 5.095], [3.0725, -5.095], [-3.0725, 5.095], [-3.0725, -5.095]],
-    [ [-12.05 , -6.8, 180, "trimpot10"]
-    ]];
+MT3608 = ["MT3608", "MT3608 boost converter module",        37, 17, 1.2, 2, 1.5, [5, 3], "#2140BE", false,
+      [[3.0725, 5.095], [3.0725, -5.095], [-3.0725, 5.095], [-3.0725, -5.095]],
+      [[-12.05 , -6.8, 180, "trimpot10"],
+       [-24.05 , 13.8, 90, "smd_soic", SOT23_6, "B628"],
+        [-12.3, -14.4, 0, "smd_diode",DO214AC, "SS34"],
+        [-28.5, 13.2, 90,"smd_cap", CAP1206, 0.5],
+        [-20, 13.2, 90,"smd_cap", CAP1206, 0.5],
+        [-24.05 , -11.8, 180, "smd_inductor", CDRH104, "220"]]
+      ];
 
 HW803_1WAY_RELAY = [
     "HW803_1WAY_RELAY", "HW-803 5V 1 way relay module",
@@ -1197,6 +1202,27 @@ ESP_12F = pcb("ESP_12F", "ESP-12F ESP8266 WiFi module", [24, 16, 0.8],
     ]
 );
 
+RCWL0516 = pcb(
+    "RCWL-0516", "Microwave Radar Sensor",
+    size = [36, 17.3, 1.2],
+    colour = "#17682d",
+    hole_d = 1.7,
+    holes = [
+          [  inch(0.05),  inch(0.05) ],
+          [ -inch(0.05),  inch(0.05) ],
+          [ -inch(0.05), -inch(0.05) ],
+          [  inch(0.05), -inch(0.05) ],
+          [ -inch(0.65), -inch(0.05) ],
+          [ -inch(0.65),  inch(0.05) ],
+    ],
+    grid = [inch(0.05), inch(0.13), 1,  5, silver, inch(0.1), inch(0.1)],
+  components = [
+        [inch(0.18), inch(0.13), 90,"smd_cap", CAP1206, 0.5],
+        [inch(0.18), inch(0.32), 90,"smd_cap", CAP1206, 0.5],
+        [inch(0.18), inch(0.54), 90,"smd_cap", CAP1206, 0.5],
+        [inch(0.45), inch(0.34),  0,"smd_soic", SOIC16, "RCWL9196"],
+            ]
+);
 
 tiny_buck = pcb("tiny_buck", "Ultra Small 3A buck regulator", [20, 11, 1.6],
     hole_d = 1.2,
@@ -1222,7 +1248,7 @@ tiny_pcbs = [ESP_201, ESP_01M, XIAO, ESP_12F, MP1584EN, ESP_01,tiny_buck, LIPO_f
 
 big_pcbs = [BTT_RELAY_V1_2, BTT_SKR_MINI_E3_V2_0, BTT_SKR_E3_TURBO, BTT_SKR_V1_4_TURBO, DuetE, Duex5];
 
-pcbs = [KY_040, TP4056, L9110S, ZC_A0591, MT3608, RAMPSEndstop, ArduinoNano, HW803_1WAY_RELAY, Feather405, RPI_Pico, ESP32_DOIT_V1, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, OPZ2, PanelDue_v3, RPI3A, RPI3, RPI4];
+pcbs = [KY_040, TP4056, L9110S, ZC_A0591, RCWL0516, MT3608,RAMPSEndstop, ArduinoNano, HW803_1WAY_RELAY, Feather405, RPI_Pico, ESP32_DOIT_V1, RPI0, EnviroPlus, ArduinoUno3, ArduinoLeonardo, WD2002SJ, OPZ2, PanelDue_v3, RPI3A, RPI3, RPI4];
 
 pcbs_not_shown = [Melzi, Duex2, PSU12V1A, Keyes5p1, PI_IO, ExtruderPCB];
 

vitamins/radial.scad

@@ -158,6 +158,7 @@ module rd_module(type, value) { //! Draw a PCB mounted potted module, e.g. PSU o
     r = rd_module_radius(type);
     size = rd_module_size(type);
     pin = rd_module_pin_size(type);
+
     color(rd_module_colour(type))
         rounded_top_rectangle(size, r, r);
 
@@ -393,3 +394,60 @@ module rd_electrolytic(type, value, pitch = undef, z = 0, tail = 3) { //! Draw a
                 cylinder(r = jacket_ir, h = eps);
     }
 }
+
+function rd_boxc_size(type)    = type[1]; //! Overall size and corner radius
+function rd_boxc_z(type)       = type[2]; //! Height of inner base above PCB.
+function rd_boxc_skirt(type)   = type[3]; //! Skirt slot, thickness, height
+function rd_boxc_leads(type)   = type[4]; //! Lead pitch, diameter and length
+function rd_boxc_colours(type) = type[5]; //! Case colour and resin fill colour
+
+module rd_box_cap(type, kind, value) { //! Draw radial boxed film capacitor
+    vitamin(str("rd_boxc(", type[0], ", \"", kind, "\", \"", value, "\" ): ", kind, " ", value));
+
+    size = rd_boxc_size(type);
+    r = size[3];
+    skirt = rd_boxc_skirt(type);
+    inset = skirt.y * 2;
+    leads = rd_boxc_leads(type);
+    c = rd_boxc_colours(type);
+    z = rd_boxc_z(type);
+    $fn = fn;
+
+    color(c[0]) {
+        translate_z(z)
+            rounded_top_rectangle([size.x, size.y, size.z - z], r, r);
+
+        for(i = [0, 1])
+            translate_z(i * skirt.z)
+                linear_extrude(z)
+                    difference() {
+                        rounded_square([size.x, size.y], r);
+
+                        square([size.x - inset, size.y - inset], center = true);
+
+                        if(!i)
+                            square([skirt.x, size.y], center = true);
+                    }
+    }
+
+    color(c[1])
+        translate_z(z)
+            cube([size.x - inset, size.y - inset, 2 * eps], center = true);
+
+    color(silver)
+        for(end = [-1, 1])
+            translate([end * leads.x / 2, 0]) {
+                translate_z(- leads.z)
+                    cylinder(d = leads.y, h = leads.z + z);
+
+                solder(leads.y / 2);
+            }
+
+    color("black")
+        translate([0, -size.y / 2])
+            rotate([90, 0, 0])
+                linear_extrude(eps)
+                    translate([-size.x * 0.45, size.z * 0.75])
+                         resize([size.x * 0.9, size.z / 6])
+                            text(value, halign = "left", valign = "top");
+}

vitamins/radials.scad

@@ -54,4 +54,10 @@ ECAP8x11 = ["ECAP8x12", [8.2, 7.5, 12.5], 0.5, [2.4, 2.5], 0.5, inch(0.1), [grey
 
 rd_electrolytics = [ECAP8x11];
 
+// Boxed plastic film capacitors
+BOXC18x5x11  = ["BOXC18x5x11",  [18,  5, 11, 0.25], 1.2, [8,  0.6, 0.4], [15, 0.6, 4.4], [grey(40), "LightYellow"]];
+BOXC18x10x16 = ["BOXC18x10x16", [18, 10, 16, 0.25], 1.7, [12, 0.8, 0.4], [15, 0.8, 4.4], [grey(40), "LightYellow"]];
+
+rd_box_caps = [BOXC18x5x11, BOXC18x10x16];
+
 use <radial.scad>

vitamins/rockers.scad

@@ -35,8 +35,8 @@ neon_spades  = [[spade4p8, 7.3, 0, -7, 0],
 //
 //                                                                               w   h   t
 //
-small_rocker   = ["small_rocker",   "Rocker Switch PRASA1-16F-BB0BW", 13, 19.8, 15, 21, 2, 12.8, 18.5, 11.8, 2.5,  -1, 3.8, small_spades];
-neon_indicator = ["neon_indicator", "Neon Indicator H8630FBNAL",      13, 19.8, 15, 21, 2, 12.8, 18.5, 12.5, 2.5,  0,  0.3, neon_spades];
+small_rocker   = ["small_rocker",   "Rocker Switch PRASA1-16F-BB0BW", 13, 19.25, 15, 21, 2, 12.8, 18.5, 11.8, 2.5,  -1, 3.8, small_spades];
+neon_indicator = ["neon_indicator", "Neon Indicator H8630FBNAL",      13, 19.25, 15, 21, 2, 12.8, 18.5, 12.5, 2.5,  0,  0.3, neon_spades];
 
 rockers = [small_rocker, neon_indicator];
 

vitamins/sheets.scad

@@ -44,6 +44,7 @@ DiBond    = [ "DiBond",    "Sheet DiBond",            3, [0.2, 0.2, 0.2, 1    ],
 DiBond6   = [ "DiBond6",   "Sheet DiBond",            6, [0.2, 0.2, 0.2, 1    ], false];
 Cardboard = [ "Cardboard", "Corrugated cardboard",    5, [0.8, 0.6, 0.3, 1    ], false];
 FoilTape  = [ "FoilTape",  "Aluminium foil tape",   0.05,[0.9, 0.9, 0.9, 1    ], false];
+Sellotape = [ "Sellotape", "Sellotape tape",        0.05,[1,   1,   0.9, 0.5  ], false];
 Foam20    = [ "Foam20",    "Foam sponge",             20,[0.3, 0.3, 0.3, 1    ], true];
 AL1_6     = [ "AL1_6",     "Aluminium tooling plate", 1.6, [0.5, 0.5, 0.5, 0.5], false];
 AL2       = [ "AL2",       "Aluminium tooling plate", 2, [0.9, 0.9, 0.9, 1    ], false];
@@ -59,6 +60,6 @@ CF3 =       [ "CF3",       "Sheet carbon fiber",      3, grey(35),
 
 
 sheets = [CF1, CF2, CF3, MDF3, MDF6, MDF10, MDF12, MDF19, MDF22, PMMA1p25, PMMA2, PMMA3, PMMA6, PMMA8, PMMA10,
-         glass2, DiBond, DiBond6, Cardboard, FoilTape, AL1_6, AL2, AL3, AL6, AL8, Steel06, Spring08, Silicone3, Foam20];
+         glass2, DiBond, DiBond6, Cardboard, FoilTape, Sellotape, AL1_6, AL2, AL3, AL6, AL8, Steel06, Spring08, Silicone3, Foam20];
 
 use <sheet.scad>

vitamins/smd.scad

@@ -55,7 +55,7 @@ function smd_size(size) = //! Convert size to 1/100" notation
 
 module smd_led(type, colour, cutout) { //! Draw an SMD LED with specified `colour`
     size = smd_led_size(type);
-    vitamin(str("smd_led(", type[0], ", ", colour, "): SMD LED ", smd_size(size), " ", colour));
+    vitamin(str("smd_led(", type[0], ", \"", colour, "\"): SMD LED ", smd_size(size), " ", colour));
 
     lens = smd_led_lens(type);
     r = size.y * 0.32;
@@ -137,7 +137,7 @@ function smd_cap_end_cap(type) = type[2]; //! End cap width
 
 module smd_capacitor(type, height, value = undef) { //! Draw an SMD capacitor with specified height
     size = smd_cap_size(type);
-    vitamin(str("smd_capacitor(", type[0], "): SMD capacitor ", smd_size(size), !is_undef(value) ? str(" ", value) : ""));
+    vitamin(str("smd_capacitor(", type[0], arg(value, undef, "value"), "): SMD capacitor ", smd_size(size), !is_undef(value) ? str(" ", value) : ""));
 
     cap = smd_cap_end_cap(type);
 
@@ -161,7 +161,7 @@ function smd_sot_lead_size(type)  = type[6];    //! Lead width, foot depth, lead
 function smd_sot_tab_width(type)  = type[7];    //! The wide lead at the top
 
 module smd_sot(type, value) { //! Draw an SMD transistor
-    vitamin(str("smd_sot(", type[0], "): ", type[0], " package ", value));
+    vitamin(str("smd_sot(", type[0], ", \"", value, "\"): ", type[0], " package ", value));
 
     size = smd_sot_size(type);
     z0 = smd_sot_z(type);
@@ -197,7 +197,6 @@ module smd_sot(type, value) { //! Draw an SMD transistor
             linear_extrude(eps)
                 resize([size.x - 4 * (z2 - z1) * tan(slant), size.y / 2])
                     text(value, halign = "center", valign = "center");
-
 }
 
 function smd_soic_size(type)       = type[1];    //! Body length, width and height
@@ -208,7 +207,7 @@ function smd_soic_lead_span(type)  = type[5];    //! Total span of leads
 function smd_soic_lead_size(type)  = type[6];    //! Lead width, foot depth, lead thickness
 
 module smd_soic(type, value) { //! Draw an SMD SOIC
-    vitamin(str("smd_soic(", type[0], "): ", type[0], " package ", value));
+    vitamin(str("smd_soic(", type[0], ", \"", value, "\"): ", type[0], " package ", value));
 
     size = smd_soic_size(type);
     z0 = smd_soic_z(type);
@@ -261,7 +260,7 @@ function smd_diode_leads(type)  = type[4]; //! Lead extent in x, width, thicknes
 function smd_diode_colour(type) = type[5]; //! Body colour
 
 module smd_diode(type, value) { //! Draw an SMD diode
-    vitamin(str("smd_diode(", type[0], "): ", type[0], " package ", value));
+    vitamin(str("smd_diode(", type[0], ", \"", value, "\"): ", type[0], " package ", value));
 
     slant = 5;                              //! 5 degree body draft angle
     size = smd_diode_size(type);
@@ -326,7 +325,7 @@ module smd_tant(type, value) { //! Draw an SMD tantalum capacitor
     volts = is_undef(value) ? "" : let(c = value[3])
         assert(in(codes, c), str("expected the 4th character of value to be a voltage code: ", codes, ", got ", c))
             str(", ", voltages[search(c, codes)[0]], "V");
-    vitamin(str("smd_tant(", type[0], "): SMD Tantalum capacitor package ", type[0][len(type[0]) -1], uF, volts));
+    vitamin(str("smd_tant(", type[0], arg(value, undef, "value"), "): SMD Tantalum capacitor package ", type[0][len(type[0]) -1], uF, volts));
 
     size = smd_tant_size(type);
     slant = 5;                              //! 5 degree body draft angle
@@ -388,7 +387,7 @@ function smd_inductor_leads(type)  = type[4]; //! Lead extent in x, width, thick
 function smd_inductor_colour(type) = type[5]; //! Body colour
 
 module smd_inductor(type, value) { //! Draw an SMD inductor
-    vitamin(str("smd_inductor(", type[0], "): ", type[0], " package ", value));
+    vitamin(str("smd_inductor(", type[0], " ,\"", value, "\"): ", type[0], " package ", value));
 
     size = smd_inductor_size(type);
     z0 = smd_inductor_z(type);
@@ -437,7 +436,7 @@ function smd_pot_cross(type)    = type[4]; //! Cross head slot for screwdriver
 function smd_pot_flat(type)     = type[5]; //! Flat at the back of the wiper
 
 module smd_pot(type, value) { //! Draw an SMD pot
-    vitamin(str("smd_pot(", type[0], "): ", type[0], " package ", value));
+    vitamin(str("smd_pot(", type[0], ", \"", value, "\"): ", type[0], " package ", value));
 
     size = smd_pot_size(type);
     contacts = smd_pot_contacts(type);
@@ -601,7 +600,7 @@ function smd_qfp_pin_size(type)  = type[5]; //! Pins dimensions
 function smd_qfp_gullwing(type)  = type[6]; //! Gullwing S, L, R1, R2
 
 module smd_qfp(type, value) { //! Draw and SMD QFP package
-    vitamin(str("smd_qfp(", type[0], "): SMD chip: ", value, ", package : ", type[0]));
+    vitamin(str("smd_qfp(", type[0], ", \"", value, "\"): SMD chip: ", value, ", package : ", type[0]));
 
     size = smd_qfp_body_size(type);
     offset = size.z / 2 * tan(smd_qfp_slant(type));
@@ -652,3 +651,66 @@ module smd_qfp(type, value) { //! Draw and SMD QFP package
                     circle(r = pin.y, $fn = fn);
             }
 }
+
+function smd_250V_fuse_size(type) = type[1]; //! Bounding box of the body
+function smd_250V_fuse_z(type)    = type[2]; //! Height of body above the PCB surface
+function smd_250V_fuse_step(type) = type[3]; //! End cutout length, width and height
+function smd_250V_fuse_base(type) = type[4]; //! Base length
+
+module gcube(s) translate_z(s.z / 2) cube(s, center = true);
+
+module smd_250V_fuse(type, value) { //! Draw an SMD mains fuse
+    size = smd_250V_fuse_size(type);
+    step = smd_250V_fuse_step(type);
+    base = smd_250V_fuse_base(type);
+    z = smd_250V_fuse_z(type);
+
+    vitamin(str("smd_250V_fuse(", type[0], ", \"", value, "\"): SMD fuse: ", type[0], " ", value));
+
+    color("LightYellow")
+        translate_z(z) {
+            gcube(base);
+
+            translate_z(base.z)
+                gcube([size.x - step.x * 2, size.y, size.z - base.z]);
+
+            for(end = [-1, 1], side = [-1,1]) {
+                translate([end * (size.x / 2 - step.x / 2), side * (size.y / 2 - step.y / 2)])
+                    gcube(step);
+
+                translate([end * (size.x / 2 - step.x / 2 - eps), 0])
+                    gcube([step.x, size.y, base.z]);
+
+            }
+        }
+
+    color(silver) {
+        contact_h = step.z - 0.2;
+        fuse_d = size.y - 2 * step.y;
+
+        for(end = [-1, 1])
+            translate([end * (size.x / 2 - step.x), 0, contact_h / 2])
+                rotate([90, 0, 0])
+                    linear_extrude(size.y - 2 * step.y, center = true)
+                        difference() {
+                            rounded_square([step.x * 2, contact_h], 0.2, $fn = fn);
+
+                            translate([-step.x * end, 0])
+                                square([step.x * 2, contact_h], center = true);
+                        }
+
+        translate_z(step.z - fuse_d / 2)
+            rotate([0, 90, 0])
+                linear_extrude(size.x - (2 * step.x - eps), center = true)
+                    scale([1, size.y / fuse_d - eps])
+                    rotate(90)
+                        semi_circle(fuse_d / 2);
+
+    }
+
+    color("black")
+        translate_z(z + size.z)
+            linear_extrude(eps)
+                resize([(size.x - 2 * step.x) * 0.9, size.y / 2])
+                    text(value, halign = "center", valign = "center");
+}

vitamins/smds.scad

@@ -70,8 +70,9 @@ TANT_C = ["TANT_C", [5.8, 3.2, 2.6], 0.1, 1.3,  [6.0, 2.2, 0.08, 2.9], ["#E9D769
 smd_tants = [TANT_A, TANT_B, TANT_C];
 
 IND2525 = ["IND2525", [6.75, 6.75, 2], 0.1, 1.75, [7.24, 3.2, 0.15, 4.4], grey(50)];
+CDRH104 = ["CDRH104", [10.3, 10.3, 4.0], 0.1, 3.85, [10.5, 3.2, 0.15, 4.4], grey(50)];
 
-smd_inductors = [IND2525];
+smd_inductors = [IND2525, CDRH104];
 
 TC33X1 = ["TC33X1", [3.0, 3.8, 0.5], [0.95, 0.9, 0.88, 1.5, 0.2, 0.75],[3.0, 0.1, 0.2, 1.2, 1.7, 1.2, 1, 0.5], [2.1, 0.5], 1.5];
 
@@ -86,4 +87,8 @@ QFP50P1200X1200X160_64N = ["QFP50P1200X1200X160_64N", [10, 10, 1.6], 12, 64, 0.5
 
 smd_qfps = [ QFP50P1200X1200X160_64N ];
 
+OMT250 = ["OMT250", [11, 4.6, 3.3], 0.15, [1.9,0.5, 2.7], [5.5, 4.6, 0.5]];
+
+smd_250V_fuses = [OMT250];
+
 use <smd.scad>

vitamins/ttrack.scad

@@ -0,0 +1,209 @@
+//
+// NopSCADlib Copyright Chris Palmer 2024
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+
+//
+//! T-Tracks used in woodworking jigs
+//
+include <../utils/core/core.scad>
+use <../utils/thread.scad>
+
+use <screw.scad>
+
+function ttrack_width(type)         = type[1];   //! Width of track section
+function ttrack_height(type)        = type[2];   //! Height of track section
+function ttrack_opening(type)       = type[3];   //! Width of the opening
+function ttrack_slot_width(type)    = type[4];   //! Width of the slot
+function ttrack_slot_height(type)   = type[5];   //! Height of the slot
+function ttrack_top_thickness(type) = type[6];   //! Thickness of the top layer
+function ttrack_screw_pitch(type)   = type[7];   //! Distance between screws
+function ttrack_screw(type)         = type[8];   //! Screw used to fasten track
+function ttrack_fixture(type)         = type[9];  //! Fixture, such as T-bolt or Miter insert used with this track
+
+function tbolt_description(type)    = type[1];   //! Description of this t-track bolt
+function tbolt_head_length(type)    = type[2];   //! Head length for t-track bolt
+function tbolt_head_width(type)     = type[3];   //! Head width for t-track bolt
+function tbolt_head_thickness(type) = type[4];   //! Head thickness for t-track bolt
+function tbolt_thread(type)         = type[5];   //! M thread for this bolt
+
+function t_insert_description(type)   = type[1];   //! Description of this t-track insert
+function t_insert_top_width(type)     = type[2];   //! Top Width of t-track insert
+function t_insert_width(type)         = type[3];   //! Width of t-track insert
+function t_insert_height(type)        = type[4];   //! Height of t-track insert
+function t_insert_top_thickness(type) = type[5];   //! Top thickness for t-track insert
+function t_insert_thread(type)        = type[6];   //! M thread for this the screw hole in this insert
+
+function ttrack_holes(type, length) = //! Number of holes in a rail given its `length`
+    floor((length - 2 * ttrack_screw_end(type)) / ttrack_screw_pitch(type)) + 1;
+
+
+
+module ttrack(type, length, colour = "LightSlateGray") { //! Draw the specified rail
+    W  = ttrack_width(type);
+    H  = ttrack_height(type);
+    SW = ttrack_slot_width(type);
+    SH = ttrack_slot_height(type);
+    T  = ttrack_top_thickness(type);
+    O  = ttrack_opening(type);
+    screw=ttrack_screw(type);
+
+    vit_colour = (colour == "LightSlateGray" ? "" : str(", colour=\"", colour, "\""));
+
+    vitamin(str("ttrack(", type[0], ", ", length, vit_colour, "): T-Track ", type[0], " x ", length, "mm"));
+
+    color(colour) {
+        difference() {
+            rotate([90,0,0])
+                linear_extrude(length, center=true, convexity = 3)
+                    polygon([
+                        [ -O/2,       0 ], // left side of the opening
+                        [ -W/2,       0 ], // left top
+                        [ -W/2,      -H ], // left bottom
+                        [  W/2,      -H ], // right bottom
+                        [  W/2,       0 ], // right top
+                        [  O/2,       0 ], // right side of the opening
+                        [  O/2,      -T ], // right bottom side of the opening
+                        [ SW/2,      -T ], // right top of the slot
+                        [ SW/2, -T - SH ], // right bottom of the slot
+                        [ -SW/2,-T - SH ], // left bottom of the slot
+                        [ -SW/2,     -T ], // left top of the slot
+                        [ -O/2,      -T ]  // left bottom side of the opening
+                    ]);
+                ttrack_hole_positions(type, length) {
+                    B = H - (SH + T);
+                    screw_countersink(screw, true);
+                    translate_z(-B/2)
+                        cylinder(r=screw_clearance_radius(screw), h=(H-(SH+T) + 0.2), center=true);
+                }
+            }
+
+        }
+
+}
+
+module ttrack_assembly(type, length, colour = "LightSlateGray") {
+    ttrack(type, length, colour);
+    ttrack_hole_positions(type, length)
+        explode(20)
+            screw(ttrack_screw(type), 15);
+}
+module ttrack_hole_positions(type, length) { //! Position children over screw holes
+    P = ttrack_screw_pitch(type);
+    H  = ttrack_height(type);
+    B = H - (ttrack_slot_height(type) +  ttrack_top_thickness(type));
+
+    count = floor(length / P);
+    first = (length - count * P)/2;
+
+    c = first < P/3 ? count - 1 : count;  // we don't want screws right on the edge
+    N = (length - c * P)/2;
+
+    for (y = [N:P:length-N])
+        translate([0,length/2 - y, -H + B])
+            children();
+}
+
+module ttrack_place_bolt(type, pos, bolt = undef) { //! Place a T-Bolt relative to the centre of the track
+    bolt = is_undef(bolt) ? ttrack_fixture(type) : bolt;
+
+    T = tbolt_head_thickness(bolt);
+    translate([0,pos,-(ttrack_top_thickness(type)/2) - T])
+        rotate([0,0,90])
+            children();
+}
+
+module ttrack_place_insert(type, pos, insert = undef) { //! Place a T-Insert relative to the centre of the track
+    insert = is_undef(insert) ? ttrack_fixture(type) : insert;
+    TT = t_insert_top_thickness(insert);
+    T = ttrack_top_thickness(type);
+    translate([0,pos,-T+TT])
+        rotate([0,0,90])
+            children();
+}
+
+module ttrack_bolt(type, length) {
+    L = tbolt_head_length(type);
+    W = tbolt_head_width(type);
+    T = tbolt_head_thickness(type);
+    distance = L - W;
+
+    D = tbolt_thread(type);
+    pitch = metric_coarse_pitch(D);
+
+    vitamin(str(tbolt_description(type), ":", "M", D, " x ", length, "mm"));
+
+    color(silver) {
+        hull()
+            for (x = [-1, 1])
+                translate([x * distance/2, 0, 0])
+                    cylinder(d=W, h=T, center=true);
+
+        translate_z((length/2))
+            male_metric_thread(D, pitch, length - T, center = true, top = -1, bot = 0, solid = true, colour = undef);
+    }
+
+}
+
+module ttrack_insert(type, length, num_holes = 1, colour="LightSlateGray") {
+    TW = t_insert_top_width(type);
+    W  = t_insert_width(type);
+    H  = t_insert_height(type);
+    T  = t_insert_top_thickness(type);
+    //distance = L - W;
+
+    D = t_insert_thread(type);
+    pitch = metric_coarse_pitch(D);
+
+    vit_colour = (colour == "LightSlateGray" ? "" : str(", colour=\"", colour, "\""));
+    vitamin(str("ttrack_insert(", type[0], ", ", length, ", ", num_holes, vit_colour, "):", t_insert_description(type), ", M", length, "mm, with ", num_holes, " M", D));
+
+    color(colour) {
+        union() {
+            difference() {
+                rotate([90,0,90]) {
+                    linear_extrude(length, center=true, convexity=2)
+                        polygon([
+                            [ -TW/2,  0 ], // left top
+                            [ -TW/2, -T ], // left centre, bottom of top
+                            [  -W/2, -T ], // left centre
+                            [  -W/2, -H ], // left bottom
+                            [   W/2, -H ], // right bottom
+                            [   W/2, -T ], // right centre
+                            [  TW/2, -T ], // right centre, bottom of top
+                            [  TW/2,  0 ] // right top
+                        ]);
+                }
+                ttrack_insert_hole_positions(type, length, num_holes)
+                    translate_z(-H/2)
+                        cylinder(h=H+1, d=t_insert_thread(type), center=true);
+            }
+            ttrack_insert_hole_positions(type, length, num_holes)
+                translate_z(-H/2)
+                    female_metric_thread(D, pitch, H, center = true);
+        }
+    }
+
+
+
+}
+
+module ttrack_insert_hole_positions(type, length, num_holes) {
+    P = length / (num_holes + 1);
+    for (x = [P:P:length-P])
+        translate([length/2 - x,0,0])
+            children();
+}

vitamins/ttracks.scad

@@ -0,0 +1,52 @@
+//
+// NopSCADlib Copyright Chris Palmer 2024
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+
+use <screw.scad>
+
+// Bolts                                                                             HL,   HW,  HT, Thread M
+ttrack_bolt_M6       = [ "ttrack_bolt_M6",       "T-Track Bolt M6",                  18,   12, 2.5,  6 ];
+ttrack_bolt_M6_small = [ "ttrack_bolt_M6_small", "T-Track Bolt M6 with small head",  18,   11, 2.5,  6 ];
+ttrack_bolt_M8       = [ "ttrack_bolt_M8",       "T-Track Bolt M8",                22.5, 12.6,   3,  8 ];
+
+// Inserts
+//                                                                                                      TW,  W,   H,  SH, Thread M
+ttrack_insert_mitre_30_M6 = [ "TTrack_insert_Miter30_M6", "T-Track insert, Miter track 30mm, M6 thread", 19, 23, 7.8, 4.8, 6 ];
+ttrack_insert_mitre_30_M8 = [ "TTrack_insert_Miter30_M8", "T-Track insert, Miter track 30mm, M8 thread", 19, 23, 7.8, 4.8, 8 ];
+
+//
+// Tracks
+// Width, Depth, Opening, Slot width, slot height, Top thickness, Screw pitch
+//                                                          W     D     O     SW     SH    TT    Sp
+ttrack_universal_19mm    = [ "ttrack_universal_19mm",      19,  9.5,  9.5,  14.2,   3.3,   2.4,  75, M3_cs_cap_screw, ttrack_bolt_M8 ];
+ttrack_universal_19mm_A  = [ "ttrack_universal_19mm_A",  18.7, 12.5,  8.3,    12,   7.3,   3.5,  75, M3_cs_cap_screw, ttrack_bolt_M6 ];
+ttrack_universal_19mm_B  = [ "ttrack_universal_19mm_B",    19,  9.5,  6.6,  11.3,     4,   2.5,  75, M3_cs_cap_screw, ttrack_bolt_M6_small ];
+
+ttrack_mitre_30mm   = [ "ttrack_mitre_30mm",    30,   12.8, 19.3,  23.6,   3.1,   5.4,  75, M4_cs_cap_screw, ttrack_insert_mitre_30_M6 ];
+ttrack_mitre_36mm   = [ "ttrack_mitre_36mm",    36,   13.5,   19,  23.5,   3.6,   3.6,  75, M4_cs_cap_screw ];
+
+
+
+
+ttracks = [ ttrack_universal_19mm, ttrack_universal_19mm_A, ttrack_universal_19mm_B, ttrack_mitre_30mm, ttrack_mitre_36mm];
+ttrack_bolts = [ ttrack_bolt_M6, ttrack_bolt_M6_small, ttrack_bolt_M8 ];
+ttrack_inserts = [ ttrack_insert_mitre_30_M6, ttrack_insert_mitre_30_M8 ];
+
+
+use <ttrack.scad>

vitamins/tubing.scad

@@ -18,10 +18,11 @@
 //
 
 //
-//! Tubing and sleeving. The internal diameter can be forced to stretch it over something.
+//! Tubing and sleeving. The internal diameter can be forced to stretch it over something. A path can be specified, otherwise it is just straight with the specified length.
 //
 include <../utils/core/core.scad>
 include <../utils/tube.scad>
+include <../utils/sweep.scad>
 
 function tubing_material(type) = type[1]; //! Material description
 function tubing_od(type)       = type[2]; //! Outside diameter
@@ -31,11 +32,12 @@ function tubing_colour(type)   = type[4]; //! Colour
 function tubing_or(type)        = tubing_od(type) / 2; //! Outside radius
 function tubing_ir(type)        = tubing_id(type) / 2; //! Inside radius
 
-module tubing(type, length = 15, forced_id = 0, center = true) { //! Draw specified tubing with optional forced internal diameter
+module tubing(type, length = 15, forced_id = 0, center = true, path = []) { //! Draw specified tubing with optional forced internal diameter and optional path.
     original_od = tubing_od(type);
     original_id = tubing_id(type);
     id = forced_id ? forced_id : original_id;
     od = original_od + id - original_id;
+    length = path ? round(path_length(path)) : length;
     if(tubing_material(type) == "Heatshrink sleeving")
         vitamin(str("tubing(", type[0], arg(length, 15), "): ", tubing_material(type), " ID ", original_id, "mm x ",length, "mm"));
     else
@@ -45,6 +47,16 @@ module tubing(type, length = 15, forced_id = 0, center = true) { //! Draw specif
         woven_tube(od / 2, id /2, center = center, length, colour = tubing_colour(type));
     else
         color(tubing_colour(type))
+            if(path)
+                render_if(manifold)
+                    difference() {
+                        sweep(path, circle_points(od / 2));
+                        start = path[0] - eps * unit(path[1] - path[0]);
+                        n = len(path) - 1;
+                        end = path[n] + eps * unit(path[n] - path[n - 1]);
+                        sweep(concat([start], path, [end]), circle_points(id / 2));
+                    }
+            else
                 linear_extrude(length, center = center, convexity = 4)
                     difference() {
                         circle(d = od);

vitamins/washer.scad

@@ -23,7 +23,7 @@
 //! If a washer is given a child, usually a screw or a nut, then it is placed on its top surface.
 //
 include <../utils/core/core.scad>
-include <../utils/sweep.scad>
+use <../utils/sweep.scad>
 
 soft_washer_colour = grey(20);
 hard_washer_colour = grey(85);

vitamins/wire.scad

@@ -44,23 +44,62 @@ function cable_is_ribbon(cable) = len(cable) > 2 && cable[2]; //! Is a ribbon ca
 function cable_wire_colours(cable) = assert(len(cable[3]) >= cable_wires(cable)) cable[3]; //! Individual wire colours
 function cable_tlen(cable)      = cable[4]; //! Twisted cable twist length
 function cable(wires, size, colours, ribbon = false, tlen = 25) = [wires, size, ribbon, colours, tlen]; //! Cable constructor
+function cable_merge(cable1, cable2) = //! Combine the wires of two cables
+    assert(cable_wire_size(cable1) == cable_wire_size(cable2))
+    assert(cable_is_ribbon(cable1) == cable_is_ribbon(cable2))
+    cable(cable_wires(cable1) + cable_wires(cable2),
+          cable_wire_size(cable1),
+          concat(cable_wire_colours(cable1), cable_wire_colours(cable1)),
+          cable_is_ribbon(cable1));
 
-// numbers from http://mathworld.wolfram.com/CirclePacking.html
-function cable_radius(cable) = [0, 1, 2, 2.15, 2.41, 2.7, 3, 3, 3.3][cable_wires(cable)] * cable_wire_size(cable) / 2; //! Radius of a bundle of wires, see <http://mathworld.wolfram.com/CirclePacking.html>.
+// numbers from https://en.wikipedia.org/wiki/Circle_packing_in_a_circle
+function cable_radius(cable) = [ //! Radius of a bundle of wires, see <http://mathworld.wolfram.com/CirclePacking.html>.
+        0, 1, 2,
+        2.154,   // 3
+        2.414,   // 4
+        2.701,   // 5
+        3,       // 6
+        3,       // 7
+        3.304,   // 8
+        3.613,   // 9
+        3.813,   // 10
+        3.923,   // 11
+        4.029,   // 12
+        4.236,   // 13
+        4.328,   // 14
+        4.521,   // 15
+        4.615,   // 16
+        4.792,   // 17
+        4.863,   // 18
+        4.863,   // 19
+        5.122,   // 20
+    ][cable_wires(cable)] * cable_wire_size(cable) / 2;
 
 function wire_hole_radius(cable) = ceil(4 * cable_radius(cable) + 1) / 4; //! Radius of a hole to accept a bundle of wires, rounded up to standard metric drill size
 
 function cable_bundle(cable) = //! Dimensions of the bounding rectangle of a bundle of wires in a flat cable clip
     (cable_is_ribbon(cable) ? [cable_wires(cable), 1] :
-    [[0,0], [1,1], [2,1], [2, 1 + sin(60)], [2,2], [3, 1 + sin(60)], [3,2]][cable_wires(cable)]) * cable_wire_size(cable);
+    [[0, 0],                    // 0
+     [1, 1],                    // 1
+     [2, 1],                    // 2
+     [2, 1 + sin(60)],          // 3
+     [2, 2],                    // 4
+     [3, 1 + sin(60)],          // 5
+     [3, 2],                    // 6
+     [4, 1 + sin(60)],          // 7
+     [3, 2 + sin(60)],          // 8
+     [3, 3]
+    ][cable_wires(cable)]) * cable_wire_size(cable);
 
 function cable_bundle_positions(cable) = let( //! Positions of wires in a bundle to go through a cable strip
         wires = cable_wires(cable),
-        bottom = cable_is_ribbon(cable) ? wires : wires < 3 ? wires : ceil(wires / 2),
-        top = wires - bottom
+        bottom = cable_is_ribbon(cable) ? wires : wires < 3 ? wires : wires <= 7 ? ceil(wires / 2) : min(wires, 3),
+        middle = min(wires - bottom, 3),
+        top = wires - bottom - middle
     )
     [for(i = [0 : 1 : bottom - 1])    [i - (bottom - 1) / 2,       0.5],
-     for(i = [top - 1 : -1 : 0])   [i - (top - 1) / 2, top == bottom ? 1.5 : 0.5 + sin(60)]
+     for(i = [middle - 1 : -1 : 0])   [i - (middle - 1) / 2,       middle == bottom ? 1.5 : 0.5 + sin(60)],
+     for(i = [0 : 1 : top - 1])       [i - [0.5, 0.5, 1][top - 1], top == middle ?    2.5 : 1.5 + sin(60)]
     ] * cable_wire_size(cable);
 
 function cable_width(cable)  = cable_bundle(cable).x; //! Width in flat clip