Added 10 turn trimpots

printed/carriers.scad

@@ -18,7 +18,7 @@
 //
 
 //
-//! Adapts ESP12 module to 0.1" grid. See <https://hydraraptor.blogspot.com/2018/04/esp-12-module-breakout-adaptor.html>.
+//! Adapts ESP12 modules and various small PCBs to 0.1" grid. See <https://hydraraptor.blogspot.com/2018/04/esp-12-module-breakout-adaptor.html>.
 //
 $extrusion_width = 0.5;
 
@@ -61,3 +61,71 @@ module ESP12F_carrier_stl() { //! Generate the STL for an ESP12 carrier
                 }
     }
 }
+
+module TP4056_carrier_stl() { //! Generate the STL for an TP4056 carrier, two required
+    stl("TP4056_carrier");
+    pitch = 2.54;
+    outer_pitch = 13.9;
+    inner_pitch = 7.54;
+    hole = pitch - 3 * extrusion_width;
+    pins = 6;
+    length1 = outer_pitch + hole + squeezed_wall * 2;
+    length2 = (pins - 1) * pitch + hole + squeezed_wall * 2;
+    height = 3;
+
+    width = hole + squeezed_wall * 2;
+    spacing = inch(0.9);
+
+    difference() {
+        hull() {
+            translate_z(height - eps / 2)
+                cube([width, length1, eps], center = true);
+
+            translate_z(eps / 2)
+                cube([width, length2, eps], center = true);
+        }
+
+        for(i = [0 : pins - 1])
+            let(x = [-outer_pitch / 2, - inner_pitch / 2, 0, 0, inner_pitch / 2, outer_pitch / 2][i])
+                if(x)
+                    hull() {
+                        translate([0, x, height])
+                            cube([hole, hole, eps], center = true);
+
+                        translate([0, i * pitch - (pins - 1) * pitch / 2])
+                            cube([hole, hole, eps], center = true);
+                    }
+    }
+}
+
+module MT3608_carrier_stl() { //! Generate the STL for an MT3608 carrier, two required
+    stl("MT3608_carrier");
+    pcb_width = 17;
+    w_pitch_top = 6.81;
+    w_pitch_bot = inch(0.3);
+    l_pitch_top = 30.855;
+    l_pitch_bot = inch(1.2);
+    hole = 1;
+    height = 3;
+    wall = 2 * extrusion_width;
+    width = hole + 2 * wall;
+    offset = (l_pitch_top - l_pitch_bot) / 2;
+
+    difference() {
+        hull() {
+            translate([offset, 0, height - eps / 2])
+                rounded_rectangle([width, pcb_width - 2, eps], 1);
+
+            translate_z(eps / 2)
+                rounded_rectangle([width, pcb_width - 2, eps], 1);
+        }
+        for(side = [-1, 1])
+            hull() {
+                translate([offset, side * w_pitch_top / 2, height])
+                    cube([hole, hole, eps], center = true);
+
+                translate([0, side * w_pitch_bot / 2])
+                    cube([hole, hole, eps], center = true);
+            }
+    }
+}

readme.md

@@ -1923,7 +1923,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | ```pcb_screw_positions(type)``` | Positions children at the mounting hole positions |
 | ```pcb_spacer(screw, height, wall = 1.8, taper = 0)``` | Generate STL for PCB spacer |
 | ```rj45(cutout = false)``` | Draw RJ45 Ethernet connector |
+| ```standoff(h, d, h2, d2)``` | Draw a standoff |
 | ```terminal_35(ways, colour = "blue")``` | Draw 3.5mm terminal block |
+| ```trimpot10(vertical, coutout = false)``` | Draw a ten turn trimpot |
 | ```uSD(size, cutout = false)``` | Draw uSD socket |
 | ```usb_Ax1(cutout = false)``` | Draw USB type A single socket |
 | ```usb_Ax2(cutout = false)``` | Draw USB type A dual socket |
@@ -2007,7 +2009,9 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | ```pcb_screw_positions(type)``` | Positions children at the mounting hole positions |
 | ```pcb_spacer(screw, height, wall = 1.8, taper = 0)``` | Generate STL for PCB spacer |
 | ```rj45(cutout = false)``` | Draw RJ45 Ethernet connector |
+| ```standoff(h, d, h2, d2)``` | Draw a standoff |
 | ```terminal_35(ways, colour = "blue")``` | Draw 3.5mm terminal block |
+| ```trimpot10(vertical, coutout = false)``` | Draw a ten turn trimpot |
 | ```uSD(size, cutout = false)``` | Draw uSD socket |
 | ```usb_Ax1(cutout = false)``` | Draw USB type A single socket |
 | ```usb_Ax2(cutout = false)``` | Draw USB type A dual socket |
@@ -3789,7 +3793,7 @@ of conductive panels, an extra layer of insulation.
 ---
 <a name="Carriers"></a>
 ## Carriers
-Adapts ESP12 module to 0.1" grid. See <https://hydraraptor.blogspot.com/2018/04/esp-12-module-breakout-adaptor.html>.
+Adapts ESP12 modules and various small PCBs to 0.1" grid. See <https://hydraraptor.blogspot.com/2018/04/esp-12-module-breakout-adaptor.html>.
 
 
 [printed/carriers.scad](printed/carriers.scad) Implementation.
@@ -3800,6 +3804,8 @@ Adapts ESP12 module to 0.1" grid. See <https://hydraraptor.blogspot.com/2018/04/
 | Module | Description |
 |:--- |:--- |
 | ```ESP12F_carrier_stl()``` | Generate the STL for an ESP12 carrier |
+| ```MT3608_carrier_stl()``` | Generate the STL for an MT3608 carrier, two required |
+| ```TP4056_carrier_stl()``` | Generate the STL for an TP4056 carrier, two required |
 
 ![carriers](tests/png/carriers.png)
 
@@ -3807,6 +3813,8 @@ Adapts ESP12 module to 0.1" grid. See <https://hydraraptor.blogspot.com/2018/04/
 | Qty | Filename |
 | ---:|:--- |
 |   1 | ESP12F_carrier.stl |
+|   1 | MT3608_carrier.stl |
+|   1 | TP4056_carrier.stl |
 
 
 <a href="#top">Top</a>

tests/PCB.scad

@@ -98,6 +98,8 @@ test_pcb = ["TestPCB", "Test PCB",
         [ 12, 444,   0, "2p54socket", 8, 1, undef, undef, undef, "red" ],
         [ 10, 470,   0, "standoff",  5, 4.5, 12.5, 2.54],
         [  6, 480, 180, "uSD", [12, 11.5, 1.4]],
+        [ 20, -5, 180, "trimpot10"],
+        [ 20, -15,  0, "trimpot10", true],
     ],
     // accessories
     []

tests/carriers.scad

@@ -19,7 +19,16 @@
 include <../utils/core/core.scad>
 use <../printed/carriers.scad>
 
-module carriers()
+module carriers() {
     color(pp1_colour) ESP12F_carrier_stl();
 
+    translate([0, 15])
+        rotate(90)
+            color(pp1_colour) TP4056_carrier_stl();
+
+    translate([0, 25])
+        rotate(90)
+            color(pp1_colour) MT3608_carrier_stl();
+}
+
 carriers();

vitamins/pcb.scad

@@ -721,7 +721,7 @@ module molex_254(ways) { //! Draw molex header
                 cube([0.44, 0.75, above + below], center = true);
 }
 
-module standoff(h, d, h2, d2) {
+module standoff(h, d, h2, d2) { //! Draw a standoff
     color("white") {
         cylinder(d = d, h = h);
 
@@ -735,6 +735,44 @@ module standoff(h, d, h2, d2) {
     }
 }
 
+module trimpot10(vertical, coutout = false) { //! Draw a ten turn trimpot
+    l = 10;
+    w = 9.5;
+    h = 4.8;
+    foot_w = 1;
+    foot_h = 0.5;
+    screw_h = 1.5;
+    screw_d = 2.25;
+    slot_w =  0.6;
+    slot_h = 0.8;
+
+    translate(vertical ? [0, -h / 2, l / 2] : [0, 0])
+        rotate([vertical ? -90 : 0, 0, 0]) {
+            color("#2CA1FD") {
+                translate([0, -foot_h / 2, foot_h / 2 + h / 2])
+                    cube([w, l - foot_h, h - foot_h], center = true);
+
+                for(x = [-1, 1], y = [-1, 1])
+                    translate([x * (w - foot_w) / 2, y * (l - foot_w) / 2, h / 2])
+                        cube([foot_w, foot_w, h], center = true);
+
+            }
+
+            color(brass)
+                translate([-w / 2 + screw_d / 2, -l / 2, h - screw_d / 2])
+                    rotate([90, 0, 0]) {
+                        cylinder(d = screw_d, h = screw_h - slot_h);
+
+                        linear_extrude(height = screw_h)
+                            difference() {
+                                circle(d = screw_d);
+
+                                square([slot_w, screw_d + 1], center = true);
+                            }
+                    }
+         }
+}
+
 module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb component from description
     function show(comp, part) = (comp[3] == part || comp[3] == str("-",part)) && (!cutouts || angle == undef || angle == comp.z);
     function param(n, default = 0) = len(comp) > n ? comp[n] : default;
@@ -773,6 +811,7 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
         if(show(comp, "pcb")) if(!cutouts) translate_z(comp[4]) pcb(comp[5]);
         if(show(comp, "standoff")) if(!cutouts) standoff(comp[4], comp[5], comp[6], comp[7]);
         if(show(comp, "uSD")) uSD(comp[4], cutouts);
+        if(show(comp, "trimpot10")) trimpot10(param(4, false), cutouts);
     }
 }