Added SMD 0805 LEDs.

printed/printed_box.scad

@@ -71,7 +71,7 @@ function pbox_mid_offset(type) = pbox_ridges(type).y + pbox_wall(type) / 2; // O
 
 function pbox_screw_inset(type) = //! How far the base screws are inset
     let(foot = pbox_foot(type),
-        r = foot ? foot_diameter(foot) / 2 : washer_radius(pbox_washer(type)),
+        r = foot ? foot_diameter(foot) / 2 : pbox_base(type) ? washer_radius(pbox_washer(type)) : insert_hole_radius(pbox_insert(type)),
         R =  pbox_radius(type)
     ) max(r, R - (R - r) / sqrt(2));
 

readme.md

@@ -24,23 +24,24 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
 <tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
 <tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SCS_bearing_blocks">SCS_bearing_blocks</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
 <tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Layout">Layout</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Maths">Maths</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Meter">Meter</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
+<tr><td></td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
 </table>
 
 ---
@@ -2002,6 +2003,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | ```hdmi(type, cutout = false)``` | Draw HDMI socket |
 | ```jack(cutout = false)``` | Draw 3.5mm jack |
 | ```molex_254(ways)``` | Draw molex header |
+| ```molex_usb_Ax2(cutout)``` | Draw Molex USB connector suitable for perf board |
 | ```pcb(type)``` | Draw specified PCB |
 | ```pcb_assembly(type, height, thickness)``` | Draw PCB assembly with spaces and fasteners in place |
 | ```pcb_base(type, height, thickness, wall = 2)``` | Generate STL for a base with PCB spacers |
@@ -2052,6 +2054,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | ```ax_res(res1_4, 10000)``` |  Resistor 10000 Ohms 5% 0.25W |
 |   1 | ```ax_res(res1_2, 100000)``` |  Resistor 100000 Ohms 5% 0.5W |
 |   1 | ```ax_res(res1_8, 1e+6, tol = 1)``` |  Resistor 1e+6 Ohms 1% 0.125W |
+|   1 | ```smd_led(LED0805, red)``` |  SMD LED 0805 red |
 |   1 | ```square_button(button_6mm)``` |  Square button 6mm |
 |   1 | ```pcb(TMC2130)``` |  TMC2130 |
 |   1 | ```green_terminal(gt_5p08, 2)``` |  Terminal block 2 way 0.2" |
@@ -2124,6 +2127,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | ```hdmi(type, cutout = false)``` | Draw HDMI socket |
 | ```jack(cutout = false)``` | Draw 3.5mm jack |
 | ```molex_254(ways)``` | Draw molex header |
+| ```molex_usb_Ax2(cutout)``` | Draw Molex USB connector suitable for perf board |
 | ```pcb(type)``` | Draw specified PCB |
 | ```pcb_assembly(type, height, thickness)``` | Draw PCB assembly with spaces and fasteners in place |
 | ```pcb_base(type, height, thickness, wall = 2)``` | Generate STL for a base with PCB spacers |
@@ -2985,6 +2989,46 @@ SK shaft support brackets
 |   6 | ```washer(M5_washer)``` |  Washer  M5 x 10mm x 1mm |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="SMDs"></a>
+## SMDs
+Surface mount components for PCBs.
+
+
+[vitamins/smds.scad](vitamins/smds.scad) Object definitions.
+
+[vitamins/smd.scad](vitamins/smd.scad) Implementation.
+
+[tests/SMDs.scad](tests/SMDs.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```smd_led_lens(type)``` | Lens length width and height |
+| ```smd_led_size(type)``` | Body length, width and height |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| ```smd_100th(x)``` | Convert dimesion to 1/100" notation |
+| ```smd_led_height(type)``` | Total height |
+| ```smd_size(size)``` | Convert size to 1/100" notation |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```smd_led(type, colour, cutout)``` | Draw an SMD LED with specified ```colour``` |
+
+![smds](tests/png/smds.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | ```smd_led(LED0805, green)``` |  SMD LED 0805 green |
+
+
 <a href="#top">Top</a>
 
 ---

tests/PCB.scad

@@ -21,6 +21,7 @@ include <../vitamins/microswitches.scad>
 include <../vitamins/d_connectors.scad>
 include <../vitamins/leds.scad>
 include <../vitamins/axials.scad>
+include <../vitamins/smds.scad>
 
 use <../vitamins/pcb.scad>
 
@@ -58,7 +59,7 @@ test_pcb = ["TestPCB", "Test PCB",
     [
         [ 20, -5, 180, "trimpot10"],
         [ 20, -15,  0, "trimpot10", true],
-
+        [ 10,  2,   0, "smd_led", LED0805, "red"],
         [ 10,  10,   0, "2p54header", 4, 1],
         [ 25,  10,   0, "2p54header", 5, 1, undef, "blue" ],
         [ 10,  20,   0, "2p54boxhdr", 4, 2],
@@ -71,10 +72,11 @@ test_pcb = ["TestPCB", "Test PCB",
         [ 10,  65, 180, "rj45"],
         [  8,  85, 180, "usb_A"],
         [  8, 105, 180, "usb_Ax2"],
-        [  3, 125, 180, "usb_uA"],
-        [  8, 140, 180, "usb_B"],
-        [  5, 160,   0, "buzzer", 4.5, 8.5],
-        [ 20, 160,   0, "buzzer"],
+        [  3, 140, 180, "usb_uA"],
+        [  8, 155, 180, "usb_B"],
+        [  8.5, 125, 180, "molex_usb_Ax2"],
+        [ 25, 200,   0, "buzzer", 4.5, 8.5],
+        [ 25, 218,   0, "buzzer"],
         [  8, 190, 180, "jack"],
         [  6, 200, 180, "barrel_jack"],
         [  5, 218, 180, "hdmi"],

tests/SMDs.scad

@@ -0,0 +1,29 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../utils/core/core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/smds.scad>
+
+module smds()
+    layout([for(l = smd_leds) smd_led_size(l).x], 1)
+        smd_led(smd_leds[$i], ["green", "blue", "red"][$i % 3]);
+
+if($preview)
+    smds();

vitamins/pcb.scad

@@ -36,6 +36,7 @@ use <d_connector.scad>
 use <led.scad>
 use <dip.scad>
 use <axial.scad>
+use <smd.scad>
 
 function pcb_name(type)         = type[1];  //! Description
 function pcb_length(type)       = type[2];  //! Length
@@ -155,6 +156,64 @@ module usb_A(h, v_flange_l, bar, cutout) {
             }
 }
 
+module molex_usb_Ax2(cutout) { //! Draw Molex USB connector suitable for perf board
+    w = 15.9;
+    h = 16.6;
+    l = 17;
+    pin_l = 2.8;
+    clearance = 0.2;
+    tag_l = 4.4;
+    tag_r = 0.5;
+    tag_w = 1.5;
+    tag_t = 0.3;
+    tag_p = 5.65;
+
+    if(cutout)
+        translate([0, -w / 2 - clearance, -clearance])
+            cube([100, w + 2 * clearance, h + 2 * clearance]);
+    else {
+        color(silver)
+            translate([-l / 2, 0])
+                rotate([90, 0, 90])
+                    translate([-w / 2, 0]) {
+                        cube([w, h, l - 9]);
+
+                        linear_extrude(l)
+                            difference() {
+                                square([w, h]);
+
+                                for(z = [-1, 1])
+                                    translate([w / 2, h / 2 + z * 8.5 / 2])
+                                        square([12.6, 5.08], center = true);
+                            }
+                    }
+
+        for(z = [-1, 1])
+            translate_z(h / 2 + z * 8.5 / 2)
+                usb_A_tongue();
+
+        color(silver)
+            rotate(-90) {
+                for(x = [-1.5 : 1 : 1.5], y = [0.5 : 1 : 1.5])
+                    translate([inch(x / 10), -l / 2 + inch(y / 10)])
+                        hull() {
+                            cube([0.6, 0.3, 2 * pin_l - 2], center = true);
+
+                            cube([0.4, 0.3, 2 * pin_l], center = true);
+                        }
+
+                for(side = [-1, 1], end = [0, 1])
+                    translate([side * w / 2, -l / 2 + tag_w / 2 + end * tag_p])
+                        rotate(-side * 90)
+                            hull() {
+                                translate([0, tag_l - tag_r])
+                                    cylinder(r = tag_r, h = tag_t);
+
+                                translate([-tag_w / 2, 0])
+                                    cube([tag_w, eps, tag_t]);
+                            }
+            }
+    }
 }
 
 module rj45(cutout = false) { //! Draw RJ45 Ethernet connector
@@ -851,6 +910,8 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
         if(show(comp, "led")) led(comp[4], comp[5], 2.6);
         if(show(comp, "pdip")) pdip(comp[4], comp[5], param(6, false), param(7, inch(0.3)));
         if(show(comp, "ax_res")) ax_res(comp[4], comp[5], param(6, 5), param(7, 0));
+        if(show(comp, "molex_usb_Ax2")) molex_usb_Ax2(cutouts);
+        if(show(comp, "smd_led")) smd_led(comp[4], comp[5], cutouts);
     }
 }
 

vitamins/pcbs.scad

@@ -20,6 +20,7 @@ include <microswitches.scad>
 include <d_connectors.scad>
 include <leds.scad>
 include <axials.scad>
+include <smds.scad>
 
 //
 //                                   l      w      t    r     h     l  c        b     h
@@ -348,6 +349,8 @@ MT3608 = ["MT3608", "MT3608 boost converter module",        37, 17, 1.2, 2, 1.5,
 TP4056 = ["TP4056", "TP4056 Li-lon Battery charger module", 26.2, 17.5, 1.0, 0, 1.0, [2.4, 2.4], "#2140BE", false,
     [[1.67, 1.8], [1.67, -1.8], [-1.67, 1.8], [-1.67, -1.8], [-1.67, -4.98], [-1.67, 4.98]],
     [ [  2, 17.5 / 2, 180, "usb_uA"],
+      [  7, -2      ,   0, "smd_led", LED0805, "red"],
+      [ 11, -2      ,   0, "smd_led", LED0805, "blue"],
 
     ]];
 
@@ -358,6 +361,8 @@ WD2002SJ = ["WD2002SJ", "WD2002SJ Buck Boost DC-DC converter", 78, 47, 1.6, 0, 3
       [ -25.5, 3.1,   0, "trimpot10", true],
       [  30.5, 3.1,   0, "trimpot10", true],
       [  41.5, 3.1,   0, "trimpot10", true],
+      [ -10.5, 1.5,   0, "smd_led", LED0805, "blue"],
+      [  16,   1.8,   0, "smd_led", LED0805, "red"],
     ],
     []];
 

vitamins/smd.scad

@@ -0,0 +1,80 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Surface mount components for PCBs.
+//
+include <../utils/core/core.scad>
+
+use <../utils/tube.scad>
+
+function smd_led_size(type) = type[1]; //! Body length, width and height
+function smd_led_lens(type) = type[2]; //! Lens length width and height
+function smd_led_height(type) =        //! Total height
+    smd_led_size(type).z + smd_led_lens(type).z;
+
+function smd_100th(x) = //! Convert dimesion to 1/100" notation
+    let(s = str(round(x / inch(0.01))))
+        len(s) < 2 ? str("0", s) : s;
+
+function smd_size(size) = //! Convert size to 1/100" notation
+    str(smd_100th(size.x), smd_100th(size.y));
+
+module smd_led(type, colour, cutout) { //! Draw an SMD LED with specified ```colour```
+    size = smd_led_size(type);
+    vitamin(str("smd_led(", type[0], ", ", colour, "): SMD LED ", smd_size(size), " ", colour));
+
+    lens = smd_led_lens(type);
+    r = size.y * 0.32;
+    $fn = 32;
+
+    if(cutout)
+        cylinder(d = 2.85, h = 100); // For lightguide made from transparent PLA filament
+    else {
+        color("white")
+            linear_extrude(size.z)
+                difference() {
+                    square([size.x, size.y], center = true);
+
+                    for(end = [-1, 1])
+                        translate([end * size.x / 2, 0])
+                            circle(r);
+                }
+
+        color(gold)
+             linear_extrude(size.z)
+                intersection() {
+                    square([size.x, size.y], center = true);
+
+                    for(end = [-1, 1])
+                        translate([end * size.x / 2, 0])
+                            ring(or = r, ir = r / 2);
+                }
+
+        color(colour, 0.9)
+            translate_z(size.z)
+                hull() {
+                    cube([lens.x, lens.y, eps], center = true);
+
+                    slant = lens.z * tan(15);
+                    translate_z(lens.z / 2)
+                        cube([lens.x - slant, lens.y - slant, lens.z], center = true);
+                }
+    }
+}

vitamins/smds.scad

@@ -0,0 +1,28 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Axial components
+//
+
+LED0805 = ["LED0805", [2, 1.25, 0.46], [1.4, 1.25, 0.54]];
+
+smd_leds = [LED0805];
+
+use <smd.scad>