Added TUK FACK2SPM Cat5E RJ45 shielded panel mount coupler.

Panel_meters can now have inner apertures and buttons.

printed/printed_box.scad

@@ -78,7 +78,7 @@ function pbox_screw_inset(type) = //! How far the base screws are inset
         R =  pbox_radius(type)
     ) max(r, R - (R - r) / sqrt(2));
 
-module pbox_screw_positions(type) {
+module pbox_screw_positions(type) { //! Place children at base screw positions
     foot = pbox_foot(type);
     inset = pbox_screw_inset(type);
     for(x = [-1, 1], y = [-1, 1])
@@ -127,6 +127,9 @@ module pbox_inner_shape(type) {
     rounded_square([w, d], rad, center = true);
 }
 
+module pbox_outer_shape(type) //! 2D outer shape of the box
+    offset(pbox_wall(type) / 2) pbox_mid_shape(type);
+
 module pbox_base(type) { //! Generate the STL for the base
     stl(str(pbox_name(type),"_base"));
     t = pbox_base(type);
@@ -161,7 +164,7 @@ module pbox(type) { //! Generate the STL for the main case
     difference() {
         union() {
             linear_extrude(total_height)
-                offset(wall / 2) pbox_mid_shape(type);
+                pbox_outer_shape(type);
 
             if($children > 2)
                 children(2);

readme.md

@@ -523,6 +523,8 @@ Various electronic components used in hot ends and heated beds.
 | Function | Description |
 |:--- |:--- |
 | ```TO220_thickness()``` | Thickness of the tab of a TO220 |
+| ```fack2spm_bezel_size()``` | FACK2SPM Bezel dimensions |
+| ```fack2spm_screw()``` | Screw type for FACK2SPM |
 
 ### Modules
 | Module | Description |
@@ -531,6 +533,9 @@ Various electronic components used in hot ends and heated beds.
 | ```al_clad_resistor(type, value, leads = true)``` | Draw an aluminium clad resistor |
 | ```al_clad_resistor_hole_positions(type)``` | Position children at the screw holes of an aluminium clad resistor |
 | ```al_clad_resistor_holes(type, h = 100)``` | Drill screw holes for an aluminium clad resistor |
+| ```fack2spm()``` | Draw a FACK2SPM Cat5E RJ45 shielded panel mount coupler |
+| ```fack2spm_hole_positions()``` | Place children at the FACK2SPM mounting hole positions |
+| ```fack2spm_holes(h = 0)``` | Cut the holes for a FACK2SPM |
 | ```panel_USBA()``` | Draw a panel mount USBA connector |
 | ```panel_USBA_hole_positions()``` | Place children at hole positions |
 | ```panel_USBA_holes(h = 100)``` | Make holes for USBA connector |
@@ -555,6 +560,7 @@ Various electronic components used in hot ends and heated beds.
 |   4 | ```screw(M2p5_pan_screw, 16)``` |  Screw M2.5 pan x 16mm |
 |   4 | ```screw(M3_pan_screw, 16)``` |  Screw M3 pan x 16mm |
 |   1 | ```panel_USBA()``` |  Socket USB A panel mount |
+|   1 | ```tuk_fack2spm()``` |  TUK FACK2SPM Cat5E RJ45 shielded panel mount coupler |
 |   1 | ```thermal_cutout(TC)``` |  Thermal cutout TC |
 |   1 | ```resistor(Epcos)``` |  Thermistor Epcos B57560G104F 100K 1% |
 |   1 | ```resistor(EpcosBlue)``` |  Thermistor Epcos B57861S104F40 100K 1% |
@@ -1433,7 +1439,7 @@ The 7 SEGMENT.TTF font from the [docs](docs) directory needs to be installed to
 | ```meter_lug_size(type)``` | Lug length and width |
 | ```meter_offset(type)``` | Display position, 0 = center, +1 = top |
 | ```meter_pcb_size(type)``` | PCB size excluding lugs |
-| ```meter_shunt(type)``` | Ampmeter shunt wire |
+| ```meter_shunt(type)``` | Ammeter shunt wire |
 | ```meter_size(type)``` | Size of display |
 
 ### Functions
@@ -1443,6 +1449,7 @@ The 7 SEGMENT.TTF font from the [docs](docs) directory needs to be installed to
 | ```meter_bezel_rad(type)``` | Printed bezel corner radius |
 | ```meter_bezel_wall(type)``` | Printed bezel wall thickness |
 | ```meter_bezel_width(type)``` | Printed bezel width |
+| ```meter_shunt_y(type)``` | Shunt y coordinate |
 
 ### Modules
 | Module | Description |
@@ -1970,10 +1977,18 @@ Notes on the DSN_VC288:
 | Function | Description |
 |:--- |:--- |
 | ```pmeter_aperture(type)``` | Aperture length, width and bevel |
-| ```pmeter_bevel(type)``` | Bezel bevel inset and start height |
+| ```pmeter_bevel(type)``` | Bezel bevel inset and start height or a radius |
 | ```pmeter_bezel(type)``` | Bezel size |
 | ```pmeter_bezel_r(type)``` | Bezel radius |
+| ```pmeter_button_colour(type)``` | Button colour |
+| ```pmeter_button_pos(type)``` | Button position |
+| ```pmeter_button_r(type)``` | Button radius |
+| ```pmeter_button_size(type)``` | Button size |
+| ```pmeter_buttons(type)``` | List of buttons |
+| ```pmeter_inner_ap(type)``` | Inner aperture |
+| ```pmeter_inner_ap_o(type)``` | Inner aperture offset |
 | ```pmeter_pcb(type)``` | Optional PCB for open types |
+| ```pmeter_pcb_h(type)``` | Component height from the front |
 | ```pmeter_pcb_z(type)``` | Distance of PCB from the back |
 | ```pmeter_size(type)``` | Body size including bezel height |
 | ```pmeter_tab(type)``` | Tab size |
@@ -1989,6 +2004,7 @@ Notes on the DSN_VC288:
 | Module | Description |
 |:--- |:--- |
 | ```panel_meter(type)``` | Draw panel mounted LCD meter module |
+| ```panel_meter_button(type)``` | Draw panel meter button |
 | ```panel_meter_cutout(type, h = 0)``` | Make panel cutout |
 
 ![panel_meters](tests/png/panel_meters.png)
@@ -1999,6 +2015,7 @@ Notes on the DSN_VC288:
 |   1 | ```panel_meter(DSN_VC288)``` |  DSN-VC288 DC 100V 10A Voltmeter ammeter |
 |   1 | ```panel_meter(PZEM001)``` |  Peacefair PZEM-001 AC digital multi-function meter |
 |   1 | ```panel_meter(PZEM021)``` |  Peacefair PZEM-021 AC digital multi-function meter |
+|   1 | ```panel_meter(DSP5005)``` |  Ruideng DSP5005 Power supply module |
 
 
 <a href="#top">Top</a>
@@ -2084,7 +2101,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | ```box_header(2p54header, 4, 2, smt = 0)``` |  Box header 4 x 2 |
+|   1 | ```box_header(2p54header, 4, 2)``` |  Box header 4 x 2 |
 |   1 | ```d_plug(DCONN9, pcb = true)``` |  D-type 9 way PCB mount plug |
 |   1 | ```dil_socket(12, 15.24)``` |  DIL socket 24 x 0.6" |
 |   1 | ```hdmi(hdmi_full)``` |  HDMI socket |
@@ -2097,12 +2114,11 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | ```microswitch(small_microswitch)``` |  Microswitch DM1-00P-110-3 |
 |   1 | ```hdmi(hdmi_mini)``` |  Mini HDMI socket |
 |   1 | ```molex_254(2)``` |  Molex KK header 2 way |
-|   1 | ```pin_header(2p54header, 4, 1, smt = 0)``` |  Pin header 4 x 1 |
-|   1 | ```pin_header(2p54header, 5, 1, smt = undef)``` |  Pin header 5 x 1 |
-|   1 | ```pin_socket(2p54header, 4, 1, right_angle = undef, height = undef, smt = undef)``` |  Pin socket 4 x 1 |
+|   1 | ```pin_header(2p54header, 4, 1)``` |  Pin header 4 x 1 |
+|   1 | ```pin_header(2p54header, 5, 1)``` |  Pin header 5 x 1 |
+|   1 | ```pin_socket(2p54header, 4, 1)``` |  Pin socket 4 x 1 |
 |   1 | ```pin_socket(2p54header, 6, 1)``` |  Pin socket 6 x 1 |
-|   1 | ```pin_socket(2p54header, 8, 1)``` |  Pin socket 8 x 1 |
-|   1 | ```pin_socket(2p54header, 8, 1, right_angle = undef, height = undef, smt = undef)``` |  Pin socket 8 x 1 |
+|   2 | ```pin_socket(2p54header, 8, 1)``` |  Pin socket 8 x 1 |
 |   1 | ```ax_res(res1_2, 10, tol = 10)``` |  Resistor 10 Ohms 10% 0.5W |
 |   1 | ```ax_res(res1_4, 100, tol = 2)``` |  Resistor 100 Ohms 2% 0.25W |
 |   1 | ```ax_res(res1_8, 1000)``` |  Resistor 1000 Ohms 5% 0.125W |
@@ -4696,6 +4712,8 @@ It can also have printed feet on the base with the screws doubling up to hold th
 | ```pbox_base(type)``` | Generate the STL for the base |
 | ```pbox_base_screws(type, thickness = 0)``` | Place the screws and feet |
 | ```pbox_inserts(type)``` | Place the inserts for the base screws |
+| ```pbox_outer_shape(type)``` | 2D outer shape of the box |
+| ```pbox_screw_positions(type)``` | Place children at base screw positions |
 
 ![printed_box](tests/png/printed_box.png)
 

tests/PCB.scad

@@ -61,10 +61,10 @@ test_pcb = ["TestPCB", "Test PCB",
         [ 20, -15,  0, "trimpot10", true],
         [ 10,  2,   0, "smd_led", LED0805, "red"],
         [ 10,  10,   0, "2p54header", 4, 1],
-        [ 25,  10,   0, "2p54header", 5, 1, undef, "blue" ],
+        [ 25,  10,   0, "2p54header", 5, 1, false, "blue" ],
         [ 10,  20,   0, "2p54boxhdr", 4, 2],
         [ 10,  30,   0, "2p54socket", 6, 1],
-        [ 25,  30,   0, "2p54socket", 4, 1, undef, undef, undef, "red" ],
+        [ 25,  30,   0, "2p54socket", 4, 1, false, 0, false, "red" ],
         [ 10,  40,   0, "chip", 10, 5, 1, grey20],
         [  5,  50,   0, "led", LED3mm, "red"],
         [ 12,  50,   0, "led", LED5mm, "orange"],
@@ -119,7 +119,7 @@ test_pcb = ["TestPCB", "Test PCB",
         [ 80, 200,   0, "pdip", 24, "27C32", true, inch(0.6) ],
         [ 80, 170,   0, "pdip", 8, "NE555" ],
         [ 52, 206,   0, "2p54socket", 8, 1 ],
-        [ 52, 194,   0, "2p54socket", 8, 1, undef, undef, undef, "red" ],
+        [ 52, 194,   0, "2p54socket", 8, 1, false, 0, false, "red" ],
         [ 50, 220,   0, "standoff",  5, 4.5, 12.5, 2.54],
         [ 50, 240,   0, "potentiometer"],
         [ 75, 240,   0, "potentiometer", 7, 8],

tests/components.scad

@@ -41,9 +41,12 @@ module components() {
     translate([0, 50])
         TO220("Generic TO220 package");
 
-    translate([50, 50])
+    translate([40, 50])
         panel_USBA();
 
+    translate([80, 50])
+        fack2spm();
+
     translate([0,80])
         thermal_cutouts();
 

tests/panel_meters.scad

@@ -22,7 +22,7 @@ use <../utils/layout.scad>
 include <../vitamins/panel_meters.scad>
 
 module panel_meters()
-    layout([for(p = panel_meters) pmeter_size(p).x], 20)
+    layout([for(p = panel_meters) pmeter_bezel(p).x], 10)
         panel_meter(panel_meters[$i]);
 
 if($preview)

vitamins/component.scad

@@ -28,6 +28,7 @@ include <../core.scad>
 include <tubings.scad>
 include <spades.scad>
 use <../utils/rounded_cylinder.scad>
+use <../utils/dogbones.scad>
 
 function resistor_length(type)        = type[2]; //! Body length
 function resistor_diameter(type)      = type[3]; //! Body diameter
@@ -447,3 +448,75 @@ module thermal_cutout(type) { //! Draw specified thermal cutout
         thermal_cutout_hole_positions(type)
             children();
 }
+
+function fack2spm_bezel_size() = [19.2, 35.5, 2.6, 2]; //! FACK2SPM Bezel dimensions
+
+module fack2spm_hole_positions() //! Place children at the FACK2SPM mounting hole positions
+    for(end = [-1, 1])
+        translate([0, end * 28.96 / 2])
+            children();
+
+function fack2spm_screw() = M3_dome_screw; //! Screw type for FACK2SPM
+
+module fack2spm_holes(h = 0) { //! Cut the holes for a FACK2SPM
+    fack2spm_hole_positions()
+        drill(screw_clearance_radius(fack2spm_screw()), h);
+
+    dogbone_rectangle([17.15, 22.86, h]);
+}
+
+module fack2spm() { //! Draw a FACK2SPM Cat5E RJ45 shielded panel mount coupler
+    vitamin("tuk_fack2spm(): TUK FACK2SPM Cat5E RJ45 shielded panel mount coupler");
+
+    bezel = fack2spm_bezel_size();
+    body   = [16.8, 22.8, 9.8];
+    socket = [14.5, 16.1, 29.6];
+    y_offset = -(19.45 - 16.3) / 2;
+    plug = [12, 6.8, 10];
+    plug_y = y_offset - socket.y / 2 + 4 + plug.y / 2;
+    tab1 = [4, 3];
+    tab2 = [6.3, 1.6];
+
+    module socket()
+        translate([0, y_offset])
+            square([socket.x, socket.y], center = true);
+
+    color("silver") {
+        linear_extrude(bezel.z)
+            difference() {
+                rounded_square([bezel.x, bezel.y], bezel[3]);
+
+                fack2spm_hole_positions()
+                    circle(d = 3.15);
+
+                socket();
+            }
+
+        translate_z(bezel.z - body.z)
+            linear_extrude(body.z - eps)
+                difference() {
+                    square([body.x, body.y], center = true);
+
+                    socket();
+                }
+
+        translate_z(bezel.z - socket.z)
+            linear_extrude(socket.z - 0.1)
+                difference() {
+                    offset(-0.1) socket();
+
+                    translate([0, plug_y]) {
+                        square([plug.x, plug.y], center = true);
+
+                        translate([0, -plug.y / 2]) {
+                            square([tab1.x, 2 * tab1.y], center = true);
+
+                            square([tab2.x, 2 * tab2.y], center = true);
+                        }
+                    }
+                }
+
+        translate([0, plug_y, -socket.z / 2])
+            cube([plug.x, plug.y, socket.z - 2 * plug.z], center = true);
+    }
+}

vitamins/led_meter.scad

@@ -34,7 +34,7 @@ function meter_lug_size(type)    = type[4];     //! Lug length and width
 function meter_lug_offset(type)  = type[5];     //! Lug position, 0 = center, +1 = top
 function meter_hole_pitch(type)  = type[6];     //! Lug hole pitch
 function meter_hole_radius(type) = type[7];     //! Lug hole radius
-function meter_shunt(type)       = type[8];     //! Ampmeter shunt wire
+function meter_shunt(type)       = type[8];     //! Ammeter shunt wire
 
 function meter_pos(type) = (meter_pcb_size(type).y - meter_size(type).y) * meter_offset(type) / 2;
 function meter_lug_pos(type) = (meter_pcb_size(type).y - meter_lug_size(type).y) * meter_lug_offset(type) / 2;
@@ -44,6 +44,8 @@ module meter_hole_positions(type) //! Position children over the holes
         translate([side * meter_hole_pitch(type) / 2, meter_lug_pos(type)])
             children();
 
+function meter_shunt_y(type) = meter_pos(type) - meter_pcb_size(type).y / 2; //! Shunt y coordinate
+
 module meter(type, colour = "red", value = "888", display_colour = false) //! Draw a meter with optional colour and display value
 {
     vitamin(str("meter(", type[0], arg(colour, "red", "colour"), "): LED ", meter_shunt(type) ? "am" : "volt", "meter ", colour));
@@ -80,7 +82,7 @@ module meter(type, colour = "red", value = "888", display_colour = false) //! Dr
 
     shunt = meter_shunt(type);
     if(shunt)
-        translate([0, -meter_pcb_size(type).y / 2 + meter_pos(type), size.z])
+        translate([0, meter_shunt_y(type), size.z])
             vflip()
                 color("#b87333")
                     wire_link(shunt.y, shunt.x, shunt.z, tail = 2);

vitamins/panel_meter.scad

@@ -28,21 +28,42 @@
 include <../utils/core/core.scad>
 
 use <../utils/dogbones.scad>
+use <../utils/rounded_cylinder.scad>
 use <pcb.scad>
 
-function pmeter_size(type)      = type[2]; //! Body size including bezel height
-function pmeter_bezel(type)     = type[3]; //! Bezel size
-function pmeter_bezel_r(type)   = type[4]; //! Bezel radius
-function pmeter_bevel(type)     = type[5]; //! Bezel bevel inset and start height
-function pmeter_aperture(type)  = type[6]; //! Aperture length, width and bevel
-function pmeter_tab(type)       = type[7]; //! Tab size
-function pmeter_tab_z(type)     = type[8]; //! Tab vertical position
-function pmeter_thickness(type) = type[9]; //! Wall thickness if not closed
-function pmeter_pcb(type)       = type[10]; //! Optional PCB for open types
-function pmeter_pcb_z(type)     = type[11]; //! Distance of PCB from the back
+function pmeter_size(type)        = type[2];  //! Body size including bezel height
+function pmeter_bezel(type)       = type[3];  //! Bezel size
+function pmeter_bezel_r(type)     = type[4];  //! Bezel radius
+function pmeter_bevel(type)       = type[5];  //! Bezel bevel inset and start height or a radius
+function pmeter_aperture(type)    = type[6];  //! Aperture length, width and bevel
+function pmeter_tab(type)         = type[7];  //! Tab size
+function pmeter_tab_z(type)       = type[8];  //! Tab vertical position
+function pmeter_thickness(type)   = type[9];  //! Wall thickness if not closed
+function pmeter_inner_ap(type)    = type[10]; //! Inner aperture
+function pmeter_inner_ap_o(type)  = type[11]; //! Inner aperture offset
+function pmeter_pcb(type)         = type[12]; //! Optional PCB for open types
+function pmeter_pcb_z(type)       = type[13]; //! Distance of PCB from the back
+function pmeter_pcb_h(type)       = type[14]; //! Component height from the front
+function pmeter_buttons(type)     = type[15]; //! List of buttons
+
+function pmeter_button_pos(type)    = type[0]; //! Button position
+function pmeter_button_size(type)   = type[1]; //! Button size
+function pmeter_button_r(type)      = type[2]; //! Button radius
+function pmeter_button_colour(type) = type[3]; //! Button colour
 
 function pmeter_depth(type) = pmeter_size(type).z - pmeter_bezel(type).z; //! Depth below bezel
 
+module panel_meter_button(type) { //! Draw panel meter button
+    size = pmeter_button_size(type);
+    r = pmeter_button_r(type);
+    color(pmeter_button_colour(type))
+        translate(pmeter_button_pos(type))
+            if(size.x)
+                rounded_rectangle(pmeter_button_size(type), r, center = false);
+            else
+                cylinder(r = r, h = size.z);
+}
+
 module panel_meter(type) { //! Draw panel mounted LCD meter module
     vitamin(str("panel_meter(", type[0], "): ", type[1]));
     size = pmeter_size(type);
@@ -51,29 +72,52 @@ module panel_meter(type) { //! Draw panel mounted LCD meter module
     t = pmeter_thickness(type);
     r = pmeter_bezel_r(type);
     h = size.z - bezel.z;
-    app = pmeter_aperture(type);
+    ap = pmeter_aperture(type);
     tab = pmeter_tab(type);
     tab_z = pmeter_tab_z(type);
     pcb = pmeter_pcb(type);
+    ap2 = pmeter_inner_ap(type);
+    pcb_h = pmeter_pcb_h(type) - bezel.z;
+    buttons = pmeter_buttons(type);
 
     color("#94A7AB")
-        cube([app.x, app.y, 3 * eps], center = true);
+        cube([ap.x, ap.y, 3 * eps], center = true);
+
+    module corner(x, y)
+        translate([x * (bezel.x / 2 - bevel), y * (bezel.y / 2 - bevel)])
+            rounded_cylinder(r = r, r2 = bevel, h = bezel.z);
 
     color(grey30) union() {
+        //
+        // Bezel and aperture
+        //
         difference() {
-            hull() {
-                rounded_rectangle([bezel.x - 2 * bevel.x, bezel.y - 2 * bevel.x, bezel.z], r - bevel.x, center = false);
-                rounded_rectangle([bezel.x, bezel.y, bevel[1]],r, center = false);
-            }
-            hull() {
-                translate_z(bezel.z + eps) {
-                    cube([app.x + app.z, app.y + app.z, eps], center = true);
-
-                    cube([app.x, app.y, bezel.z * 2], center = true);
+            if(is_list(bevel))
+                hull() {
+                    rounded_rectangle([bezel.x - 2 * bevel.x, bezel.y - 2 * bevel.x, bezel.z], r - bevel.x, center = false);
+                    rounded_rectangle([bezel.x, bezel.y, bevel[1]], r, center = false);
                 }
+            else
+                hull() {
+                    corner(-1, -1);
+                    corner(-1,  1);
+                    corner( 1, -1);
+                    corner( 1,  1);
+                }
+
+            hull() {
+                r = max(0, -ap.z);
+                if(ap.z > 0)
+                    translate_z(bezel.z + eps)
+                        cube([ap.x + ap.z, ap.y + ap.z, eps], center = true);
+
+                translate_z(bezel.z + eps)
+                    rounded_rectangle([ap.x, ap.y, bezel.z * 2], r, center = true);
             }
         }
-
+        //
+        // Body
+        //
         translate_z(-h)
             linear_extrude(h)
                 difference() {
@@ -82,7 +126,9 @@ module panel_meter(type) { //! Draw panel mounted LCD meter module
                     if(t)
                         square([size.x - 2 * t, size.y - 2 * t], center = true);
                 }
-
+        //
+        // tabs
+        //
         if(tab)
             for(end = [-1, 1])
                 translate([end * (size.x / 2 + tab.x / 2), 0, -size.z + tab_z])
@@ -91,10 +137,27 @@ module panel_meter(type) { //! Draw panel mounted LCD meter module
                             cube([tab.x, tab.y, tab.z], center = true);
 
     }
+    if(ap2)
+        color("grey")
+            linear_extrude(ap2.z)
+                difference() {
+                    square([ap.x, ap.y], center = true);
+
+                    translate(pmeter_inner_ap_o(type))
+                        square([ap2.x, ap2.y], center = true);
+                }
     if(pcb)
         vflip()
             translate_z(h - pcb_thickness(pcb) - pmeter_pcb_z(type))
                 pcb(pcb);
+
+    if(pcb_h > 0)
+        %translate_z(-pcb_h / 2 - eps)
+            cube([size.x - 2 * t - eps, size.y - 2 * t - eps, pcb_h], center = true);
+
+    if(buttons)
+        for(b = buttons)
+            panel_meter_button(b);
 }
 
 module panel_meter_cutout(type, h = 0) { //! Make panel cutout

vitamins/panel_meters.scad

@@ -20,19 +20,32 @@
 //
 //! Panel mounted digital meter modules
 //
+//                                                                            body size           bezel size,       radius, bevel aperture     tab           tab_z t
+//            inner aperture offset    pcb         pcb z h
+PZEM021   = ["PZEM021", "Peacefair PZEM-021 AC digital multi-function meter", [84.6, 44.7, 24.4], [89.6, 49.6, 2.3], 1.5, [1, 1], [51, 30, 5], [1.3, 10, 6], 15.5, 0];
+PZEM001   = ["PZEM001", "Peacefair PZEM-001 AC digital multi-function meter", [62  , 52.5, 24.4], [67,   57.5, 2.0], 2.0, [1, 1], [61, 46,-3], [1.2, 10, 6], 15.5, 0,
+             [36, 36, 1.9], [0, 0], false, 0, 0, [
+                [[25,  8, 0], [0, 0, 2], 4, grey90],
+                [[25, -8, 0], [0, 0, 2], 4, grey90],
 
-PZEM021   = ["PZEM021",  "Peacefair PZEM-021 AC digital multi-function meter", [84.6, 44.7, 24.4], [89.6, 49.6, 2.3], 1.5, [1, 1],   [51, 30, 5], [1.3, 10, 6], 15.5, 0];
-PZEM001   = ["PZEM001",  "Peacefair PZEM-001 AC digital multi-function meter", [62  , 52.5, 24.4], [67,   57.5, 2.0], 1.5, [1, 1],   [36, 36, 0], [1.2, 10, 6], 15.5, 0];
+            ]];
 
-DSN_VC288PCB = ["", "", 41, 21, 1, 0, 0, 0, "green", false, [],
-      [ [ 5,  -3,   0, "jst_xh", 3],
+DSP5004PCB = ["", "", 68, 36, 1.6, 0, 0, 0, "green", false, [], [], []];
+DSP5005   = ["DSP5005", "Ruideng DSP5005 Power supply module",                [71.6, 39.8, 25.0], [79,   43.0, 2.3], 2.0, 1,      [67, 32,-1], [2.0, 12, 9], 13.5, 1.5,
+             [28, 27, 0.7], [-4.5, 0], DSP5004PCB, 10,   36, [
+                [[ 22,  4, 2], [ 0,   0,  11], 6,    "silver"],
+                [[ 22,  4, 5], [ 0,   0,   6], 6.5,  "silver"],
+                [[ 22, -9, 0], [ 8,   6,   1], 2.99, "yellow"],
+                [[-25, -9, 0], [ 6.5, 4.5, 1], 0.5,  "yellow"],
+                [[-25,  0, 0], [ 6.5, 4.5, 1], 0.5,  "yellow"],
+                [[-25,  9, 0], [ 6.5, 4.5, 1], 0.5,  "yellow"],
+               ]];
 
-      ],
-      []];
+DSN_VC288PCB = ["", "", 41, 21, 1, 0, 0, 0, "green", false, [], [[ 5,  -3,   0, "jst_xh", 3], ], []];
 
 DSN_VC288 = ["DSN_VC288","DSN-VC288 DC 100V 10A Voltmeter ammeter",            [45.3, 26,   17.4], [47.8, 28.8, 2.5], 0,   [1, 1.8], [36, 18, 2.5], [],            0, 2,
-             DSN_VC288PCB, 5];
+              [], 0, DSN_VC288PCB, 5];
 
-panel_meters = [DSN_VC288, PZEM021, PZEM001];
+panel_meters = [DSN_VC288, PZEM021, PZEM001, DSP5005];
 
 use <panel_meter.scad>

vitamins/pcb.scad

@@ -883,9 +883,9 @@ module pcb_component(comp, cutouts = false, angle = undef) { //! Draw pcb compon
     function param(n, default = 0) = len(comp) > n ? comp[n] : default;
     rotate(comp.z) {
         // Components that have a cutout parameter go in this section
-        if(show(comp, "2p54header"))    pin_header(2p54header, comp[4], comp[5], param(6), false, cutouts, colour = param(7, undef));
-        if(show(comp, "2p54boxhdr"))    box_header(2p54header, comp[4], comp[5], param(6), cutouts);
-        if(show(comp, "2p54socket"))    pin_socket(2p54header, comp[4], comp[5], param(6, false), param(7), param(8, false), cutouts, param(9, undef));
+        if(show(comp, "2p54header"))    pin_header(2p54header, comp[4], comp[5], param(6, false), false, cutouts, colour = param(7, undef));
+        if(show(comp, "2p54boxhdr"))    box_header(2p54header, comp[4], comp[5], param(6, false), cutouts);
+        if(show(comp, "2p54socket"))    pin_socket(2p54header, comp[4], comp[5], param(6, false), param(7, 0), param(8, false), cutouts, param(9, undef));
         if(show(comp, "chip"))          chip(comp[4], comp[5], comp[6], param(7, grey30), cutouts);
         if(show(comp, "rj45"))          rj45(cutouts);
         if(show(comp, "usb_A"))         usb_Ax1(cutouts);

vitamins/screw.scad

@@ -259,22 +259,28 @@ module screw_countersink(type) { //! Countersink shape
 
 module screw_and_washer(type, length, star = false, penny = false) { //! Screw with a washer which can be standard or penny and an optional star washer on top
     washer = screw_washer(type);
+    head_type = screw_head_type(type);
 
-    translate_z(exploded() * 6)
-        if(penny)
-            penny_washer(washer);
-        else
-            washer(washer);
+    if(head_type != hs_cs && head_type != hs_cs_cap) {
+        translate_z(exploded() * 6)
+            if(penny)
+                penny_washer(washer);
+            else
+                washer(washer);
 
-    translate_z(washer_thickness(washer)) {
-        if(star) {
-            translate_z(exploded() * 8)
-                star_washer(washer);
+        translate_z(washer_thickness(washer)) {
+            if(star) {
+                translate_z(exploded() * 8)
+                    star_washer(washer);
 
-            translate_z(washer_thickness(washer))
+                translate_z(washer_thickness(washer))
+                    screw(type, length);
+            }
+            else
                 screw(type, length);
         }
-        else
-            screw(type, length);
     }
+    else
+        translate_z(eps)
+            screw(type, length);
 }