Added magnets

lib.scad

@@ -43,6 +43,7 @@ include <vitamins/ldrs.scad>
 include <vitamins/leadnuts.scad>
 include <vitamins/led_meter.scad>
 include <vitamins/light_strips.scad>
+include <vitamins/magnets.scad>
 include <vitamins/mains_sockets.scad>
 include <vitamins/modules.scad>
 include <vitamins/panel_meters.scad>

libtest.scad

@@ -50,6 +50,7 @@ use <tests/LEDs.scad>
 use <tests/light_strips.scad>
 use <tests/linear_bearings.scad>
 use <tests/LED_meters.scad>
+use <tests/magnets.scad>
 use <tests/microswitches.scad>
 use <tests/modules.scad>
 use <tests/nuts.scad>
@@ -271,8 +272,9 @@ translate([x1, leadnuts_y])
 
 leds_y = 0;
 carriers_y = leds_y + 40;
-spades_y = carriers_y + 40;
-buttons_y = spades_y + 40;
+magnets_y = carriers_y + 40;
+spades_y = magnets_y + 20;
+buttons_y = spades_y + 20;
 jacks_y = buttons_y + 40;
 microswitches_y = jacks_y + 40;
 rockers_y = microswitches_y + 40;
@@ -288,6 +290,9 @@ translate([x2 + 35, leds_y])
 translate([x2 + 8, carriers_y])
     carriers();
 
+translate([x2, magnets_y])
+    magnets();
+
 translate([x2 + 20, carriers_y])
     led_meters();
 

readme.md

@@ -26,21 +26,21 @@ See [usage](docs/usage.md) for requirements, installation instructions and a usa
 <tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
 <tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
 <tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
-<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
-<tr><td> <a href = "#IECs">IECs</a> </td><td></td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td></td><td></td><td></td></tr>
+<tr><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Wire">Wire</a> </td><td></td><td></td><td></td></tr>
 <tr><td> <a href = "#Inserts">Inserts</a> </td><td></td><td> <a href = "#Zipties">Zipties</a> </td><td></td><td></td><td></td></tr>
 </table>
 
@@ -1252,6 +1252,7 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
 | Function | Description |
 |:--- |:--- |
 | ```insert_boss_radius(type, wall)``` | Compute the outer radius of an insert boss |
+| ```insert_nose_length(type, d)``` | The length before the second ring. |
 
 ### Modules
 | Module | Description |
@@ -1675,6 +1676,36 @@ LMnUU linear bearings.
 |   1 | ```linear_bearing(LM8UU)``` |  Linear bearing LM8UU |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Magnets"></a>
+## Magnets
+Cylindrical and ring magnets.
+
+
+[vitamins/magnets.scad](vitamins/magnets.scad) Object definitions.
+
+[vitamins/magnet.scad](vitamins/magnet.scad) Implementation.
+
+[tests/magnets.scad](tests/magnets.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| ```magnet_h(type)``` | Height |
+| ```magnet_id(type)``` | Inside diameter if a ring |
+| ```magnet_od(type)``` | Outer diameter |
+| ```magnet_r(type)``` | Corner radius |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| ```magnet(type)``` | Draw specified magnet |
+
+![magnets](tests/png/magnets.png)
+
+
 <a href="#top">Top</a>
 
 ---

tests/magnets.scad

@@ -0,0 +1,29 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/magnets.scad>
+
+module magnets()
+    layout([for(m = magnets) magnet_od(m)], 5)
+        magnet(magnets[$i]);
+
+if($preview)
+    magnets();

utils/quadrant.scad

@@ -23,18 +23,21 @@
 include <../utils/core/core.scad>
 
 module quadrant(w, r, center = false) { //! Draw a square with one rounded corner, can be centered on the arc centre, when ```center``` is ```true```.
-    offset = center ? r - w : 0;
-    translate([offset, offset])
+    h = is_list(w) ? w.y : w;
+    w = is_list(w) ? w.x : w;
+    offset_w = center ? r - w : 0;
+    offset_h = center ? r - h : 0;
+    translate([offset_w, offset_h])
         hull() {
             intersection() {
-                translate([w - r, w - r])
+                translate([w - r, h - r])
                     circle4n(r);
 
-                square(w);
+                square([w, h]);
             }
 
             square([w, eps]);
 
-            square([eps, w]);
+            square([eps, h]);
         }
 }

vitamins/insert.scad

@@ -35,6 +35,15 @@ function insert_ring3_d(type)        = type[8];     //! Diameter of the bottom r
 
 function insert_hole_length(type) = round_to_layer(insert_length(type));
 
+function insert_nose_length(type, d) = let( //! The length before the second ring.
+        length = insert_length(type),
+        ring1_h = insert_ring1_h(type),
+        chamfer1 = (insert_ring2_d(type) - insert_barrel_d(type)) / 2,
+        chamfer2 = (insert_ring3_d(type) - insert_barrel_d(type)) / 2,
+        ring2_h = ring1_h + chamfer1,
+        gap = (length - ring1_h - ring2_h - chamfer2) / 3
+    ) ring1_h + gap + ring2_h - d + insert_barrel_d(type);
+
 module insert(type) { //! Draw specified insert
     length = insert_length(type);
     ring1_h = insert_ring1_h(type);
@@ -58,7 +67,7 @@ module insert(type) { //! Draw specified insert
         h3 = ring1_h + gap + ring2_h;
         h4 = ring1_h + gap + ring2_h + gap;
         color(brass)
-            rotate_extrude()
+            rotate_extrude(convexity = 3)
                 polygon([
                     [r1, 0],
                     [r1, length],

vitamins/magnet.scad

@@ -0,0 +1,49 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Cylindrical and ring magnets.
+//
+include <../utils/core/core.scad>
+
+function magnet_od(type)    = type[1]; //! Outer diameter
+function magnet_id(type)    = type[2]; //! Inside diameter if a ring
+function magnet_h(type)     = type[3]; //! Height
+function magnet_r(type)     = type[4]; //! Corner radius
+
+module magnet(type) { //! Draw specified magnet
+    od = magnet_od(type);
+    id = magnet_id(type);
+    h = magnet_h(type);
+    r = magnet_r(type);
+
+    //vitamin(str("magnet(", type[0], "): Magnet ", od, "mm diameter, ", h, "mm high", id ? str(", ", id, "mm bore") : "" ));
+
+    or = od / 2;
+    ir = id / 2;
+    color(silver)
+        rotate_extrude()
+            union() {
+                translate([ir, 0])
+                    rounded_square([or - ir, h], r, center = false);
+                if(!ir)
+                    square([r, h]);
+            }
+
+}

vitamins/magnets.scad

@@ -0,0 +1,30 @@
+//
+// NopSCADlib Copyright Chris Palmer 2020
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+//
+//! Cylindrical and ring magnets.
+//
+
+//                          od,        id,        h,         r
+MAG8x4x4p2 = ["MAG8x4x4p2", 8,         4.2,       4,         0.5];
+MAG484     = ["MAG484",     inch(1/4), inch(1/8), inch(1/4), 0.5];
+MAG5x8     = ["MAG484",     8,         0,         5,         0.5];
+
+magnets = [MAG8x4x4p2, MAG484, MAG5x8];
+
+use <magnet.scad>

vitamins/opengrab.scad

@@ -25,7 +25,7 @@
 include <../utils/core/core.scad>
 use <../utils/thread.scad>
 
-pitch = 33.8;
+pitch = 33.8 / 2;
 width = 40;
 depth = 18;
 magnet = 4.3;
@@ -37,14 +37,16 @@ pole_l = 36;
 poles = 15;
 
 module opengrab_hole_positions()    //! Position children at the screw positions
-    for(x = [-1, 1], y = [-1, 1])
-        translate([x * pitch / 2, y * pitch / 2, 0])
-            children();
+    let($d = 3.2)
+        for($x = [-pitch, pitch], $y = [-pitch, pitch])
+            translate([$x, $y])
+                children();
 
 module opengrab_side_hole_positions() //! Position children at the two 4mm hole
-    for(side = [-1, 1])
-        translate([side * (width / 2 - 3.5), 0])
-            children();
+    let($d = 4, pitch = width / 2 - 3.5)
+        for($x = [-pitch, pitch])
+            translate([$x, 0])
+                children();
 
 function opengrab_width() = width;              //! Module width
 function opengrab_depth() = depth;              //! Module height
@@ -94,9 +96,9 @@ module opengrab_target() { //! Draw OpenGrab target
                 square([width, width], center = true);
 
                 opengrab_hole_positions()
-                    circle(d = 3.2);
+                    circle(d = $d);
 
                 opengrab_side_hole_positions()
-                    circle(d = 4);
+                    circle(d = $d);
         }
 }