openscad/NopSCADlib
1
0
Fork 0
mirror of https://github.com/nophead/NopSCADlib.git synced 2025-01-17 21:48:43 +01:00
Code Issues Releases Wiki Activity
NopSCADlib/vitamins
History
Chris Palmer 43b101ae1e Reordered the display list into reducing height for better layout. 
Updated the images.
2024-02-04 22:56:09 +00:00
..
microview
Added source code
2019-06-08 22:10:47 +01:00
stl
Added can bus connectors to OpenGrab model.
2023-01-24 09:21:14 +00:00
7_segment.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
7_segments.scad
Single 7_segment objects can now have multiple digits.
2021-10-26 12:27:22 +01:00
antenna.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
antennas.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
axial.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
axials.scad
Added axial diodes, radial transistors, discs and modules.
2023-07-28 10:39:07 +01:00
ball_bearing.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
ball_bearings.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
batteries.scad
Updated images and readme.
2022-03-17 23:55:41 +00:00
battery.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
bearing_block.scad
Rendred the 3D difference.
2023-07-22 16:36:11 +01:00
bearing_blocks.scad
Added SBR rails
2023-06-30 12:57:13 +02:00
belt.scad
Belt part number is not always the same as the pitch.
2024-01-12 22:30:34 +00:00
belts.scad
Added GT2x12, GT3x6, GT3x9 and GT3x12 belts.
2024-01-14 22:50:26 +00:00
bldc_motor.scad
Made includes relative in bldc_motors.
2022-06-30 13:34:32 +01:00
bldc_motors.scad
Added BLDC3548 motor.
2021-05-30 18:58:55 +01:00
blower.scad
Fixed blower_exit_offset() for square blowers with 2 screws.
2022-01-23 09:04:46 +00:00
blowers.scad
Updated screw hole position.
2021-02-04 19:59:28 +00:00
box_section.scad
Updated images and readme.
2021-04-13 14:56:08 +01:00
box_sections.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
bulldog.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
bulldogs.scad
Added source code
2019-06-08 22:10:47 +01:00
button.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
buttons.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
cable_strip.scad
Ribbon clamps can now be made to hold multiple ribbons.
2022-01-29 13:57:40 +00:00
camera.scad
Added ESP32 camera.
2023-05-01 12:18:12 +01:00
cameras.scad
Added ESP32 camera.
2023-05-01 12:18:12 +01:00
circlip.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
circlips.scad
Added SBR rails
2023-06-30 12:57:13 +02:00
component.scad
MULTIWATT11 package now generates a BOM entry.
2023-10-30 17:47:25 +00:00
components.scad
Resistor and thermistor wires made more round.
2021-10-01 12:33:35 +01:00
d_connector.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
d_connectors.scad
Added source code
2019-06-08 22:10:47 +01:00
dip.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
display.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
displays.scad
Reordered the display list into reducing height for better layout.
2024-02-04 22:56:09 +00:00
e3d.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
extrusion_bracket.scad
extrusion_corner_bracket_assembly() and extrusion_inner_corner_bracket() can now be passed the extrusion type.
2021-09-05 10:24:42 +01:00
extrusion_brackets.scad
extrusion_corner_bracket_assembly() and extrusion_inner_corner_bracket() can now be passed the extrusion type.
2021-09-05 10:24:42 +01:00
extrusion.scad
Set convexity to 8 for linear_extrude of extrusion.
2021-10-02 09:20:51 +01:00
extrusions.scad
Fixed dimensions of E1515 extrusion.
2022-06-21 08:32:13 +01:00
fan.scad
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
2021-01-15 18:12:37 +00:00
fans.scad
25mm fans are actually 25.4, i.e. 1".
2020-09-06 11:55:58 +01:00
faston.scad
Fixed typo in comment.
2023-11-26 19:13:17 +00:00
fastons.scad
Added fastons.
2023-03-10 21:09:28 +00:00
fuseholder.scad
Nuts shown on jacks and fuseholders only shown threaded when exploded.
2021-10-06 07:32:50 +01:00
gear_motor.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
gear_motors.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
geared_stepper.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
geared_steppers.scad
Added 35BYGHJ75 geared stepper.
2021-04-25 00:07:22 +01:00
green_terminal.scad
Added axial diodes, radial transistors, discs and modules.
2023-07-28 10:39:07 +01:00
green_terminals.scad
Added green terminals gt_5x11 and gt_5x17.
2021-01-13 15:51:41 +00:00
hot_end.scad
Added hot end style string literals following discussion.
2021-09-28 17:54:42 +01:00
hot_ends.scad
Added hot end style string literals following discussion.
2021-09-28 17:54:42 +01:00
hygrometer.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
iec.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
iecs.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
insert.scad
Fixed explode line position on short inserts.
2023-12-01 22:15:41 +00:00
inserts.scad
Added short inserts and M5 inserts.
2022-09-27 00:07:23 +01:00
jack.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
jhead.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
ldr.scad
Removed the height parameter from linear_extrude
2020-03-29 20:18:57 +01:00
ldrs.scad
LDRs thicker
2019-07-29 16:39:09 +01:00
leadnut.scad
Leadnuts: add nuthousing
2022-09-27 21:50:28 +02:00
leadnuts.scad
Leadnuts: add nuthousing
2022-09-27 21:50:28 +02:00
led_meter.scad
Updated images due to pixel differences on new PC
2023-11-26 23:29:32 +00:00
led_meters.scad
led_ammeter size tweaks.
2020-04-25 19:38:43 +01:00
led.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
leds.scad
Added 8mm LED.
2023-01-07 10:08:05 +00:00
light_strip.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
light_strips.scad
Tweaked lightstrip dimensions.
2020-06-21 20:35:13 +01:00
linear_bearing.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
linear_bearings.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
magnet.scad
Allowed naming of magnets. Added radial encoder magnet.
2021-10-21 10:37:56 +01:00
magnets.scad
Allowed naming of magnets. Added radial encoder magnet.
2021-10-21 10:37:56 +01:00
mains_socket.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
mains_sockets.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microswitch.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microswitches.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
microview.scad
Single backtick now used for all code quotes.
2020-12-24 16:04:59 +00:00
module.scad
Removed some unused dependencies.
2021-10-01 12:32:01 +01:00
modules.scad
Added source code
2019-06-08 22:10:47 +01:00
nut.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
nuts.scad
update nuts.scad table comment
2022-10-20 10:57:06 -04:00
o_ring.scad
Single backtick now used for all code quotes.
2020-12-24 16:04:59 +00:00
opengrab.scad
Changed OpenGrab link as nicadrone.com has gone.
2023-01-28 20:15:15 +00:00
panel_meter.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
panel_meters.scad
Added JST PH connectors.
2020-11-12 23:34:59 +00:00
pcb.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pcbs.scad
ESP-01M added.
2023-11-27 23:46:29 +00:00
photo_interrupter.scad
Fixed typos, corrected vitamin call, added boilerplate, updated images and readme.
2023-03-11 17:50:16 +00:00
photo_interrupters.scad
Fixed typos, corrected vitamin call, added boilerplate, updated images and readme.
2023-03-11 17:50:16 +00:00
pillar.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pillars.scad
Added M3x6_hex_pillar.
2022-01-10 23:32:01 +00:00
pillow_block.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pillow_blocks.scad
Renamed kp_pillow_blocks files to pillow_blocks.
2021-03-06 16:13:09 +00:00
pin_header.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pin_headers.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
potentiometer.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
potentiometers.scad
Potentiometers now create a BOM entry and have a value specified.
2021-10-28 12:43:53 +01:00
psu.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
psus.scad
Removed CB- prefix from PSU descriptions.
2022-01-25 20:02:13 +00:00
pulley.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
pulleys.scad
Updated images and readme for new pulley.
2020-12-29 22:29:11 +00:00
radial.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
radials.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
rail.scad
Corrected MGN12 rail end value.
2021-04-05 16:45:23 +01:00
rails.scad
Added HGH15CA and HGH20CA rails.
2021-08-31 22:04:12 +01:00
ring_terminal.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
ring_terminals.scad
Added crimp version of ring terminal.
2019-10-22 16:12:58 +01:00
rocker.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
rockers.scad
Added source code
2019-06-08 22:10:47 +01:00
rod.scad
Spelling corrections.
2021-06-15 10:01:32 +01:00
sbr_rail.scad
open_bearing_theta() now derived from open_bearing_width().
2023-07-22 17:34:22 +01:00
sbr_rails.scad
Moved things around for better test images.
2023-07-22 16:37:35 +01:00
screw.scad
Removed debug echo().
2024-01-14 23:03:10 +00:00
screws.scad
Added support for shoulder screws.
2023-04-05 12:32:13 +01:00
sealing_strip.scad
Removed the height parameter from linear_extrude
2020-03-29 20:18:57 +01:00
servo_motor.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
servo_motors.scad
Added Lichuan servo motors contributed by Niclas Hedhman.
2021-08-31 22:51:24 +01:00
shaft_coupling.scad
Shaft coupling: Add flexible SC / 6x8 flexible SC
2022-09-24 14:17:15 +02:00
shaft_couplings.scad
Shaft coupling: Add flexible SC / 6x8 flexible SC
2022-09-24 14:17:15 +02:00
sheet.scad
Fixed missing brackets for sheets with chamfered corners.
2022-02-25 10:27:23 +00:00
sheets.scad
Added SMD diodes, inductors and potentiometers.
2023-01-12 23:00:21 +00:00
sk_bracket.scad
Removed some unused dependencies.
2021-10-01 12:32:01 +01:00
sk_brackets.scad
Screws.scad is now included in core.scad, so doesn't need to be included
2020-02-29 17:52:36 +00:00
smd.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
smds.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
spade.scad
Removed the height parameter from linear_extrude
2020-03-29 20:18:57 +01:00
spades.scad
IEC mains connector models more accurate.
2019-06-20 11:59:13 +01:00
spool.scad
Screws.scad is now included in core.scad, so doesn't need to be included
2020-02-29 17:52:36 +00:00
spools.scad
Added another spool size
2019-10-22 15:27:49 +01:00
spring.scad
Screws.scad is now included in core.scad, so doesn't need to be included
2020-02-29 17:52:36 +00:00
springs.scad
Added source code
2019-06-08 22:10:47 +01:00
ssr.scad
Added screw_length() to calculuate screw lengths includin washers, inserts and nuts.
2021-01-15 18:12:37 +00:00
ssrs.scad
Added source code
2019-06-08 22:10:47 +01:00
stepper_motor.scad
Added NEMA_connection_pos().
2022-06-23 18:24:44 +01:00
stepper_motors.scad
Improved stepper motor naming convention.
2022-02-22 10:14:51 +00:00
swiss_clip.scad
Added Swiss clip.
2020-04-16 00:59:27 +01:00
swiss_clips.scad
Added Swiss clip.
2020-04-16 00:59:27 +01:00
terminal.scad
Added missing description for terminals.
2022-01-29 09:34:17 +00:00
toggle.scad
Removed the height parameter from linear_extrude
2020-03-29 20:18:57 +01:00
toggles.scad
Fixed toggle switch part number typo.
2019-08-18 12:27:41 +01:00
transformer.scad
rounded_retangle() centre now defaults to false.
2021-02-08 09:24:00 +00:00
transformers.scad
Added source code
2019-06-08 22:10:47 +01:00
tubing.scad
Added tubing_ir() function.
2022-01-10 23:20:04 +00:00
tubings.scad
Added PTFE heatshrink sleeving.
2023-03-10 17:25:26 +00:00
variac.scad
Removed the height parameter from linear_extrude
2020-03-29 20:18:57 +01:00
variacs.scad
Added source code
2019-06-08 22:10:47 +01:00
veroboard.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
washer.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
washers.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
wire.scad
The wire() module can now draw wires if a path is specified.
2023-03-10 20:49:41 +00:00
ziptie.scad
Added a constructor function for PCBs.
2023-10-29 21:56:08 +00:00
zipties.scad
Fixed some more colour spellings
2020-03-29 21:36:11 +01:00