openscad/Mendel90
1
0
Fork 0
mirror of https://github.com/nophead/Mendel90.git synced 2025-01-17 12:58:16 +01:00
Code Issues Releases Wiki Activity
Mendel90/sturdy/sheets/y_heatshield.svg

40 lines
2.8 KiB
XML
Raw Normal View History

Added the cardboard heat sheild. Tweaked the X belt length and the cable strip length. Now generates PDF versions of the sheets using Inkscape.
2012-04-01 14:08:44 +01:00
<?xml version="1.0"?>
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
<svg xmlns="http://www.w3.org/2000/svg" version="1.1" height="227mm" width="203mm" >
Added the cardboard heat sheild. Tweaked the X belt length and the cable strip length. Now generates PDF versions of the sheets using Inkscape.
2012-04-01 14:08:44 +01:00
<g style="fill-opacity:1.0; stroke:black; stroke-width:1;">
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
<line x1="193.000000mm" y1="217.000000mm" x2="193.000000mm" y2="217.000000mm" />
<line x1="193.000000mm" y1="217.000000mm" x2="0.000000mm" y2="217.000000mm" />
<line x1="0.000000mm" y1="217.000000mm" x2="0.000000mm" y2="0.000000mm" />
Various design improvements: The X ends now have much stronger bar clamps and the nut traps are moved to the top for less lead screw wobble. X motor bracket now has two screws in the front of the motor and one at the back allowing it to be much smaller. The Z couplings now use neoprene tubing instead of PVC and close completely. The tube end caps are now nut traps to allow the tube to just have a single hole. The rear fixing blocks now have the central screw going the other way so have onyl two nut traps. The extruder springs now have washers to increase the default tension. The spool holder now has the washers on the outside of the spool. The carriage fan bracket has been strengthened. The fan duct now has a hole to cool the top of the hot end. Small printed parts now aggregated onto one build plate. Hole in the Wade's big gear increased slightly. The heat shield is now 5 layers of cardboard instead of foil and an air gap. Bom generation and exploded view mode can now be enabled on the command line. The assembly diagrams for the manual are now built from the command line. Some mods for the Huxley version but still broken. Fixed the long ATX bracket holes ending coincident with the face. Can now have non square print beds. Cap screws now shown silver instead of black as now all BZP. Now shows the motor wire position. % operator no longer used for transparency as OpenScad behaviour has changed. Now includes the Skeinforge and Pronteface configurations on the SD card of priovided in the kit.
2013-09-25 01:28:24 +01:00
<line x1="0.000000mm" y1="0.000000mm" x2="66.940000mm" y2="0.000000mm" />
<line x1="66.940000mm" y1="0.000000mm" x2="66.940000mm" y2="35.000000mm" />
<line x1="66.940000mm" y1="35.000000mm" x2="126.060000mm" y2="35.000000mm" />
<line x1="126.060000mm" y1="35.000000mm" x2="126.060000mm" y2="0.000000mm" />
<line x1="126.060000mm" y1="0.000000mm" x2="193.000000mm" y2="0.000000mm" />
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
<line x1="193.000000mm" y1="0.000000mm" x2="193.000000mm" y2="217.000000mm" />
<line x1="36.500000mm" y1="177.500000mm" x2="36.500000mm" y2="177.500000mm" />
<line x1="36.500000mm" y1="177.500000mm" x2="26.500000mm" y2="177.500000mm" />
<line x1="26.500000mm" y1="177.500000mm" x2="26.500000mm" y2="167.500000mm" />
<line x1="26.500000mm" y1="167.500000mm" x2="36.500000mm" y2="167.500000mm" />
<line x1="36.500000mm" y1="167.500000mm" x2="36.500000mm" y2="177.500000mm" />
<line x1="36.500000mm" y1="25.500000mm" x2="36.500000mm" y2="25.500000mm" />
<line x1="36.500000mm" y1="25.500000mm" x2="26.500000mm" y2="25.500000mm" />
<line x1="26.500000mm" y1="25.500000mm" x2="26.500000mm" y2="15.500000mm" />
<line x1="26.500000mm" y1="15.500000mm" x2="36.500000mm" y2="15.500000mm" />
<line x1="36.500000mm" y1="15.500000mm" x2="36.500000mm" y2="25.500000mm" />
<line x1="69.990000mm" y1="167.175000mm" x2="69.990000mm" y2="167.175000mm" />
<line x1="69.990000mm" y1="167.175000mm" x2="59.990000mm" y2="167.175000mm" />
<line x1="59.990000mm" y1="167.175000mm" x2="59.990000mm" y2="142.525000mm" />
<line x1="59.990000mm" y1="142.525000mm" x2="69.990000mm" y2="142.525000mm" />
<line x1="69.990000mm" y1="142.525000mm" x2="69.990000mm" y2="167.175000mm" />
This version used for kits 7- Nut traps moved further from the edge of most parts. Fixed ribbon clamp slots too deep. Modified for JHeadMK5. Changed bed thermsitor type. Extruder block is now thinner so it can protrude below the carriage. The idler bolts no go the other way round so the nuts are captive instead of the heads. 60 mm carriage fan. Spool holders now have tabs for nut traps instead of P clip. Belt lengths corrected and rounded to tooth pitch. Metal pulleys modelled. exploded variable now 0/1 instead of boolean. Dibond version now has mouse holes for wires and the Y wires run underneath the base. Added jigs for inserting Jhead and drilling tubes. Hobbed bolt not shows hob position on the BOM. Everything in the kit is now in the model and so appears on the BOM. Added ribbon cable, wire, heat shrink sleeving, foam spunge, PLA sample. Completed the kit build manual. Sub assemblies restructured to reflect the build order. View files added to make the assembly diagrams. Fixed sheets.py not working first time run.
2012-11-17 10:33:00 +00:00
<line x1="69.990000mm" y1="78.325000mm" x2="69.990000mm" y2="78.325000mm" />
<line x1="69.990000mm" y1="78.325000mm" x2="59.990000mm" y2="78.325000mm" />
<line x1="59.990000mm" y1="78.325000mm" x2="59.990000mm" y2="53.675000mm" />
<line x1="59.990000mm" y1="53.675000mm" x2="69.990000mm" y2="53.675000mm" />
<line x1="69.990000mm" y1="53.675000mm" x2="69.990000mm" y2="78.325000mm" />
This version used for the kits 1-6 at the GIST FOTM. Z axis length increased to 200mm. Added the Dibond variant that uses nuts in the parts instead of tapped holes. Added a ducted fan to the X carriage. Added a spool holder and filament dust wiper. Default hot end is now J-Head MK4. Default electronics is now Melzi plus ATX PSU on the mendel and dibond versions. The right hand stay has been moved inwards and base corner radius reduced to allow and ATX PSU to be mounted inboard. Mounting brackets for ATX PSU added. The electronics are now above the PSU. Mains inlet cover added for non ATX PSUs. Dummy load resistors added for ATX PSU. The extruder now has a groove mount for the JHead. Extruder connector increased from 9 way to 15 way to allow an IDC socket. The extruder ribbon cable is now 14 way to allow three wires for the heater. Added an extruder break out PCB. Wade's idler bracket now a bit wider to allow more tolerance on the length of the axle. Extruder motor screws now longer and hex head. The hobbed bolt now has two nuts and a star washer instead of one nut and a spring. Increased the bed ribbon cable to 26 way to make it standard size. Y carriage made a bit smaller. Thermistor added to the bed assembly. Bed cooling fan made an optional extra. Made the Z top limit switch the default. The X idler now has two bearings. Lead nuts now brass. Added metal pulleys as an option. T2.5 belts added as an option. Nut traps added to the Y carrige ribbon clamp. Corner shields and support material added to X motor bracket. Belt length calculations more accurate. Axis limit switch positions and overtravel optimised. Washer sizes tweaked. Ziptie length tweaked. PVC tubing diameter changed.
2012-11-15 17:45:30 +00:00
<line x1="166.500000mm" y1="125.500000mm" x2="166.500000mm" y2="125.500000mm" />
<line x1="166.500000mm" y1="125.500000mm" x2="156.500000mm" y2="125.500000mm" />
<line x1="156.500000mm" y1="125.500000mm" x2="156.500000mm" y2="115.500000mm" />
<line x1="156.500000mm" y1="115.500000mm" x2="166.500000mm" y2="115.500000mm" />
<line x1="166.500000mm" y1="115.500000mm" x2="166.500000mm" y2="125.500000mm" />
Added the cardboard heat sheild. Tweaked the X belt length and the cable strip length. Now generates PDF versions of the sheets using Inkscape.
2012-04-01 14:08:44 +01:00
</g>
</svg>
Reference in New Issue Copy Permalink