Added bezier_join().

Moved path_length() from sweep.scad to maths.scad.

CHANGELOG.md

@@ -3,6 +3,59 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
 
 
+### [v19.20.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.20.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.9.1...v19.20.0 "diff with v19.9.1")
+*   2022-02-15 [`0e2778e`](https://github.com/nophead/NopSCADlib/commit/0e2778e13de2e68fc21a7b4c706aada27a17842c "show commit") [C.P.](# "Chris Palmer") Cables can now have a list of wire colours.
+Added a constructor for cables.
+
+*   2022-02-15 [`50e23e5`](https://github.com/nophead/NopSCADlib/commit/50e23e5f818077e3661e25852dc959c34e6c8b4a "show commit") [C.P.](# "Chris Palmer") Added silkscreen text to PCBs.
+
+#### [v19.9.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.9.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.9.0...v19.9.1 "diff with v19.9.0")
+*   2022-02-15 [`59eeb2c`](https://github.com/nophead/NopSCADlib/commit/59eeb2c5d4c7cf9da1f219c2b01fabcf450085f3 "show commit") [C.P.](# "Chris Palmer") Trimmed the ribbon clamp tape.
+
+*   2022-02-15 [`7ea4dbe`](https://github.com/nophead/NopSCADlib/commit/7ea4dbe6cbbc23256d23f7aea87e8aac8d1000a9 "show commit") [C.P.](# "Chris Palmer") Fixed double application of `r2sides()` in `rounded_path()`.
+Added check for radius too big for corner in `rounded_path()`.
+Spiral paths can now have 0 twists.
+
+### [v19.9.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.9.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.8.1...v19.9.0 "diff with v19.8.1")
+*   2022-02-11 [`95b6771`](https://github.com/nophead/NopSCADlib/commit/95b6771811fd48af46b5c2d426c42c04cd8e5af3 "show commit") [C.P.](# "Chris Palmer") Added printed cable clips.
+
+*   2022-02-11 [`ed46cbb`](https://github.com/nophead/NopSCADlib/commit/ed46cbb1470587d4fa3ee4e0e8e0513c82693b1b "show commit") [C.P.](# "Chris Palmer") Fixed `cable_bundle()` bugs and added test.
+Added `cable_bundle_positions()`.
+Can now mark cables as ribbon to force a flat layout.
+
+#### [v19.8.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.8.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.8.0...v19.8.1 "diff with v19.8.0")
+*   2022-02-09 [`2a2b7d8`](https://github.com/nophead/NopSCADlib/commit/2a2b7d8bd60f0ea8ad2c428593e7aea1dfa06e9c "show commit") [C.P.](# "Chris Palmer") Added a second example project.
+
+### [v19.8.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.8.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.7.0...v19.8.0 "diff with v19.7.0")
+*   2022-02-09 [`055b4e7`](https://github.com/nophead/NopSCADlib/commit/055b4e7102ffcc39dc376330636efa79739a6555 "show commit") [C.P.](# "Chris Palmer") Added SOT23 and SOT223 SMD packages.
+`smd_capacitors` can now have a value.
+Wire links can now have zero length to create a vertical wire.
+
+*   2022-02-09 [`00d6efc`](https://github.com/nophead/NopSCADlib/commit/00d6efc3154bbd5597a3336bc8bdaf550e42f56a "show commit") [C.P.](# "Chris Palmer") Added veroboard constructor.
+Documented `solder_meniscus` and made it parametric.
+
+### [v19.7.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.7.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.6.0...v19.7.0 "diff with v19.6.0")
+*   2022-02-08 [`1f55097`](https://github.com/nophead/NopSCADlib/commit/1f55097bdd3e4d0164a48dd7ebb3fc5370250ac4 "show commit") [C.P.](# "Chris Palmer") Support for twisted cables.
+Sweep now distbutes twists in proportion to segments lengths.
+Added  `spiral_paths(),` `segmented_path()` and `rounded_path_vertices()` functions.
+Added `show_path(path)` module.
+
+### [v19.6.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.6.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.5.1...v19.6.0 "diff with v19.5.1")
+*   2022-02-06 [`225ea9b`](https://github.com/nophead/NopSCADlib/commit/225ea9b45160195bdf316e7ffdb383a63f898d3c "show commit") [C.P.](# "Chris Palmer") Added `rounded_path()` function to `sweep.scad`.
+
+#### [v19.5.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.5.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.5.0...v19.5.1 "diff with v19.5.0")
+*   2022-02-06 [`d341ce4`](https://github.com/nophead/NopSCADlib/commit/d341ce499e56972ff5267d3187387fe7df9d4130 "show commit") [C.P.](# "Chris Palmer") Added `render()` to `pocket_handle()`.
+
+*   2022-02-06 [`e7376e2`](https://github.com/nophead/NopSCADlib/commit/e7376e28c44355efa425b98aa0511ccdf0b63301 "show commit") [C.P.](# "Chris Palmer") Fixed corner block assembly names when overridden.
+
+*   2022-02-06 [`e238eaa`](https://github.com/nophead/NopSCADlib/commit/e238eaa473bac72136507d15c57f6156560d6cfe "show commit") [C.P.](# "Chris Palmer") Removed unused, undocumented function.
+
+### [v19.5.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.5.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.4.1...v19.5.0 "diff with v19.4.1")
+*   2022-02-01 [`04e94a8`](https://github.com/nophead/NopSCADlib/commit/04e94a859aa0d21f840c992b487a901f096790a4 "show commit") [C.P.](# "Chris Palmer") Added `earth_rot` parameter to `NEMA_screws()`.
+
+#### [v19.4.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.4.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.4.0...v19.4.1 "diff with v19.4.0")
+*   2022-02-01 [`e696dc4`](https://github.com/nophead/NopSCADlib/commit/e696dc471845550eb94e1b648d8b109cc11a9bf1 "show commit") [C.P.](# "Chris Palmer") Fixed stupid bug in `euler()`.
+
 ### [v19.4.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.4.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.3.0...v19.4.0 "diff with v19.3.0")
 *   2022-01-29 [`f33a067`](https://github.com/nophead/NopSCADlib/commit/f33a0675f5b9f6a5ebe1c4b9755e894d1e2b7994 "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
 

examples/EnviroPlus/bom/RPI_assembly.txt

@@ -0,0 +1,5 @@
+RPI_assembly:
+Vitamins:
+  1 Micro SD card
+  1 Raspberry Pi Zero
+  1 Pin header 20 x 2 right_angle

examples/EnviroPlus/bom/RPI_case_assembly.txt

@@ -0,0 +1,7 @@
+RPI_case_assembly:
+Vitamins:
+  2 Screw M2.5 pan x  6.4mm
+
+Assemblies:
+  1 RPI_assembly
+  1 enviro_case_assembly

examples/EnviroPlus/bom/back_assembly.txt

@@ -0,0 +1,8 @@
+back_assembly:
+Vitamins:
+  1 Fan 17mm x 8mm
+  1 PMS5003 particle detector
+
+Printed:
+  1 enviro_plus_case_base.stl
+  1 fan_duct.stl

examples/EnviroPlus/bom/bom.csv

@@ -0,0 +1,21 @@
+'Micro SD card',  1
+'Fan 17mm x 8mm',  1
+'Heatfit insert M2',  4
+'Nut M2.5 x 2.2mm nyloc',  4
+'Enviro+',  1
+'Raspberry Pi Zero',  1
+'Pin header 20 x 2 right_angle',  1
+'PMS5003 particle detector',  1
+'Screw M2 cap x  6mm',  4
+'Screw M2.5 pan x  6.4mm',  2
+'Screw M2.5 pan x  8mm',  4
+'Screw M3 pan x  6mm',  3
+'SMD capacitor 1206 10uF',  1
+'SMD resistor 0805 3K3 0.125W',  1
+'SOT223 package FZT851',  1
+'Veroboard 6 holes x 6strips',  1
+'Washer  M2 x 5mm x 0.3mm',  4
+'Washer  M2.5 x 5.9mm x 0.5mm',  4
+'Washer  M3 x 7mm x 0.5mm',  3
+'Wire link 0.8mm x 6.5mm',  3
+'Wire link 0.8mm x 0.4"',  1

examples/EnviroPlus/bom/bom.json

@@ -0,0 +1,194 @@
+[
+    {
+        "name": "back_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "pms5003(): PMS5003 particle detector": {
+                "count": 1
+            },
+            "fan(fan17x8): Fan 17mm x 8mm": {
+                "count": 1
+            }
+        },
+        "printed": {
+            "fan_duct.stl": {
+                "count": 1,
+                "colour": "darkorange"
+            },
+            "enviro_plus_case_base.stl": {
+                "count": 1,
+                "colour": "grey"
+            }
+        },
+        "routed": {}
+    },
+    {
+        "name": "RPI_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "pcb(RPI0): Raspberry Pi Zero": {
+                "count": 1
+            },
+            ": Micro SD card": {
+                "count": 1
+            },
+            "pin_header(2p54header, 20, 2, right_angle = true): Pin header 20 x 2 right_angle": {
+                "count": 1
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "fan_controller_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "veroboard(fan_vb): Veroboard 6 holes x 6strips": {
+                "count": 1
+            },
+            "wire_link(0.8, 10.16, tail = 2.5): Wire link 0.8mm x 0.4\"": {
+                "count": 1
+            },
+            "wire_link(0.8, 0, h = 4, tail = 2.5): Wire link 0.8mm x 6.5mm": {
+                "count": 3
+            },
+            "smd_resistor(RES0805, 3K3): SMD resistor 0805 3K3 0.125W": {
+                "count": 1
+            },
+            "smd_capacitor(CAP1206): SMD capacitor 1206 10uF": {
+                "count": 1
+            },
+            "smd_sot(SOT223): SOT223 package FZT851": {
+                "count": 1
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "enviro_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "fan_controller_assembly": 1
+        },
+        "vitamins": {
+            "pcb(EnviroPlus): Enviro+": {
+                "count": 1
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "case_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "insert(F1BM2): Heatfit insert M2": {
+                "count": 4
+            },
+            "washer(M3_washer): Washer  M3 x 7mm x 0.5mm": {
+                "count": 3
+            },
+            "screw(M3_pan_screw, 6): Screw M3 pan x  6mm": {
+                "count": 3
+            }
+        },
+        "printed": {
+            "enviro_plus_case.stl": {
+                "count": 1,
+                "colour": "grey"
+            },
+            "bulkhead.stl": {
+                "count": 1,
+                "colour": "[0.862745, 0.0784314, 0.235294]"
+            },
+            "foot.stl": {
+                "count": 3,
+                "colour": "darkorange"
+            }
+        },
+        "routed": {}
+    },
+    {
+        "name": "enviro_case_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "case_assembly": 1,
+            "enviro_assembly": 1
+        },
+        "vitamins": {
+            "screw(M2p5_pan_screw, 8): Screw M2.5 pan x  8mm": {
+                "count": 4
+            },
+            "washer(M2p5_washer): Washer  M2.5 x 5.9mm x 0.5mm": {
+                "count": 4
+            },
+            "nut(M2p5_nut, nyloc = true): Nut M2.5 x 2.2mm nyloc": {
+                "count": 4
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "RPI_case_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "enviro_case_assembly": 1,
+            "RPI_assembly": 1
+        },
+        "vitamins": {
+            "screw(M2p5_pan_screw, 6.4): Screw M2.5 pan x  6.4mm": {
+                "count": 2
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "main_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "RPI_case_assembly": 1,
+            "back_assembly": 1
+        },
+        "vitamins": {
+            "washer(M2_washer): Washer  M2 x 5mm x 0.3mm": {
+                "count": 4
+            },
+            "screw(M2_cap_screw, 6): Screw M2 cap x  6mm": {
+                "count": 4
+            }
+        },
+        "printed": {},
+        "routed": {}
+    }
+]

examples/EnviroPlus/bom/bom.txt

@@ -0,0 +1,53 @@
+Vitamins:
+                   F   
+                   a   
+                   n   
+                E      
+                n  c   
+                v  o   
+    R           i  n   
+    p           r  t   
+    i        E  o  r   
+             n     o   
+    c  B  C  v  c  l  M
+ R  a  a  a  i  a  l  a
+ p  s  c  s  r  s  e  i
+ i  e  k  e  o  e  r  n
+ 1|  |  |  |  |  |  |  |  1 Micro SD card
+  |  | 1|  |  |  |  |  |  1 Fan 17mm x 8mm
+  |  |  | 4|  |  |  |  |  4 Heatfit insert M2
+  |  |  |  |  | 4|  |  |  4 Nut M2.5 x 2.2mm nyloc
+  |  |  |  | 1|  |  |  |  1 Enviro+
+ 1|  |  |  |  |  |  |  |  1 Raspberry Pi Zero
+ 1|  |  |  |  |  |  |  |  1 Pin header 20 x 2 right_angle
+  |  | 1|  |  |  |  |  |  1 PMS5003 particle detector
+  |  |  |  |  |  |  | 4|  4 Screw M2 cap x  6mm
+  | 2|  |  |  |  |  |  |  2 Screw M2.5 pan x  6.4mm
+  |  |  |  |  | 4|  |  |  4 Screw M2.5 pan x  8mm
+  |  |  | 3|  |  |  |  |  3 Screw M3 pan x  6mm
+  |  |  |  |  |  | 1|  |  1 SMD capacitor 1206 10uF
+  |  |  |  |  |  | 1|  |  1 SMD resistor 0805 3K3 0.125W
+  |  |  |  |  |  | 1|  |  1 SOT223 package FZT851
+  |  |  |  |  |  | 1|  |  1 Veroboard 6 holes x 6strips
+  |  |  |  |  |  |  | 4|  4 Washer  M2 x 5mm x 0.3mm
+  |  |  |  |  | 4|  |  |  4 Washer  M2.5 x 5.9mm x 0.5mm
+  |  |  | 3|  |  |  |  |  3 Washer  M3 x 7mm x 0.5mm
+  |  |  |  |  |  | 3|  |  3 Wire link 0.8mm x 6.5mm
+  |  |  |  |  |  | 1|  |  1 Wire link 0.8mm x 0.4"
+
+Printed:
+  |  |  | 1|  |  |  |  |  1 bulkhead.stl
+  |  |  | 1|  |  |  |  |  1 enviro_plus_case.stl
+  |  | 1|  |  |  |  |  |  1 enviro_plus_case_base.stl
+  |  | 1|  |  |  |  |  |  1 fan_duct.stl
+  |  |  | 3|  |  |  |  |  3 foot.stl
+
+Assemblies:
+  1 RPI_assembly
+  1 RPI_case_assembly
+  1 back_assembly
+  1 case_assembly
+  1 enviro_assembly
+  1 enviro_case_assembly
+  1 fan_controller_assembly
+  1 main_assembly

examples/EnviroPlus/bom/case_assembly.txt

@@ -0,0 +1,10 @@
+case_assembly:
+Vitamins:
+  4 Heatfit insert M2
+  3 Screw M3 pan x  6mm
+  3 Washer  M3 x 7mm x 0.5mm
+
+Printed:
+  1 bulkhead.stl
+  1 enviro_plus_case.stl
+  3 foot.stl

examples/EnviroPlus/bom/enviro_assembly.txt

@@ -0,0 +1,6 @@
+enviro_assembly:
+Vitamins:
+  1 Enviro+
+
+Assemblies:
+  1 fan_controller_assembly

examples/EnviroPlus/bom/enviro_case_assembly.txt

@@ -0,0 +1,9 @@
+enviro_case_assembly:
+Vitamins:
+  4 Nut M2.5 x 2.2mm nyloc
+  4 Screw M2.5 pan x  8mm
+  4 Washer  M2.5 x 5.9mm x 0.5mm
+
+Assemblies:
+  1 case_assembly
+  1 enviro_assembly

examples/EnviroPlus/bom/fan_controller_assembly.txt

@@ -0,0 +1,8 @@
+fan_controller_assembly:
+Vitamins:
+  1 SMD capacitor 1206 10uF
+  1 SMD resistor 0805 3K3 0.125W
+  1 SOT223 package FZT851
+  1 Veroboard 6 holes x 6strips
+  3 Wire link 0.8mm x 6.5mm
+  1 Wire link 0.8mm x 0.4"

examples/EnviroPlus/bom/main_assembly.txt

@@ -0,0 +1,8 @@
+main_assembly:
+Vitamins:
+  4 Screw M2 cap x  6mm
+  4 Washer  M2 x 5mm x 0.3mm
+
+Assemblies:
+  1 RPI_case_assembly
+  1 back_assembly

examples/EnviroPlus/readme.md

@@ -0,0 +1,298 @@
+<a name="TOP"></a>
+# EnviroPlus
+Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
+
+![Main Assembly](assemblies/main_assembled.png)
+
+<span></span>
+
+---
+## Table of Contents
+1. [Parts list](#Parts_list)
+1. [Back Assembly](#back_assembly)
+1. [RPI Assembly](#RPI_assembly)
+1. [Fan Controller Assembly](#fan_controller_assembly)
+1. [Enviro Assembly](#enviro_assembly)
+1. [Case Assembly](#case_assembly)
+1. [Enviro Case Assembly](#enviro_case_assembly)
+1. [RPI Case Assembly](#RPI_case_assembly)
+1. [Main Assembly](#main_assembly)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="Parts_list"></a>
+## Parts list
+| <span style="writing-mode: vertical-rl; text-orientation: mixed;">Back</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">RPI</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Fan&nbsp;Controller</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Enviro</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Case</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Enviro&nbsp;Case</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">RPI&nbsp;Case</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Main</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">TOTALS</span> |  |
+|---:|---:|---:|---:|---:|---:|---:|---:|---:|:---|
+|  |  |  |  |  |  |  |  | | **Vitamins** |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Enviro+ |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Fan 17mm x 8mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Heatfit insert M2 |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Micro SD card |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Nut M2.5 x 2.2mm nyloc |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; PMS5003 particle detector |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Pin header 20 x 2 right_angle |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Raspberry Pi Zero |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; SMD capacitor 1206 10uF |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; SMD resistor 0805 3K3 0.125W |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; SOT223 package FZT851 |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Screw M2 cap x  6mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp; Screw M2.5 pan x  6.4mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Screw M2.5 pan x  8mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp; Screw M3 pan x  6mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Veroboard 6 holes x 6strips |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Washer  M2 x 5mm x 0.3mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Washer  M2.5 x 5.9mm x 0.5mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp; Washer  M3 x 7mm x 0.5mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Wire link 0.8mm x 0.4" |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp; Wire link 0.8mm x 6.5mm |
+| &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;8&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;10&nbsp; | &nbsp;&nbsp;12&nbsp; | &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;8&nbsp; | &nbsp;&nbsp;46&nbsp; | &nbsp;&nbsp;Total vitamins count |
+|  |  |  |  |  |  |  |  | | **3D printed parts** |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;bulkhead.stl |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;enviro_plus_case.stl |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;enviro_plus_case_base.stl |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;fan_duct.stl |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;foot.stl |
+| &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;5&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;7&nbsp; | &nbsp;&nbsp;Total 3D printed parts count |
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="back_assembly"></a>
+## Back Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| Fan 17mm x 8mm|
+|1| PMS5003 particle detector|
+
+
+### 3D Printed parts
+
+| 1 x enviro_plus_case_base.stl | 1 x fan_duct.stl |
+|---|---|
+| ![enviro_plus_case_base.stl](stls/enviro_plus_case_base.png) | ![fan_duct.stl](stls/fan_duct.png) 
+
+
+
+### Assembly instructions
+![back_assembly](assemblies/back_assembly.png)
+
+1. Print the fan duct in flexible TPE with low infill.
+1. Slide the pms5003 into the printed receptacle with the fan to the outside. Secure with tape if it is loose.
+1. Slide the fan into the fan duct.
+1. Slide the fan duct into the printed recepacle.
+
+![back_assembled](assemblies/back_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="RPI_assembly"></a>
+## RPI Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| Micro SD card|
+|1| Pin header 20 x 2 right_angle|
+|1| Raspberry Pi Zero|
+
+
+### Assembly instructions
+![RPI_assembly](assemblies/RPI_assembly_tn.png)
+
+* Solder a right angle connector to the Raspberry Pi Zero.
+
+![RPI_assembled](assemblies/RPI_assembled_tn.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="fan_controller_assembly"></a>
+## Fan Controller Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| SMD capacitor 1206 10uF|
+|1| SMD resistor 0805 3K3 0.125W|
+|1| SOT223 package FZT851|
+|1| Veroboard 6 holes x 6strips|
+|1| Wire link 0.8mm x 0.4"|
+|3| Wire link 0.8mm x 6.5mm|
+
+
+### Assembly instructions
+![fan_controller_assembly](assemblies/fan_controller_assembly_tn.png)
+
+The fan controller is a single transistor wired as a Miller integrator that effectively multiplies the capacitor value by the gain of the transistor.
+It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't whine, or stutter.
+
+![Schematic](docs/fan_controller.jpg)
+
+***
+* Make two track cuts as shown, one wide and the other narrow.
+
+![TrackCuts](docs/cuts.jpg)
+
+1. Add the SMT compeonents and then the wire links.
+1. Add more solder around the transistor to act as a heatsink.
+
+![SMT](docs/smt.jpg)
+
+
+![fan_controller_assembled](assemblies/fan_controller_assembled_tn.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="enviro_assembly"></a>
+## Enviro Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| Enviro+|
+
+
+### Sub-assemblies
+
+| 1 x fan_controller_assembly |
+|---|
+| ![fan_controller_assembled](assemblies/fan_controller_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![enviro_assembly](assemblies/enviro_assembly_tn.png)
+
+* Solder the fan_controller to the Enviro+ expansion connector at the 5V, GND and #4 pins.
+
+![enviro_assembled](assemblies/enviro_assembled_tn.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="case_assembly"></a>
+## Case Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|4| Heatfit insert M2|
+|3| Screw M3 pan x  6mm|
+|3| Washer  M3 x 7mm x 0.5mm|
+
+
+### 3D Printed parts
+
+| 1 x bulkhead.stl | 1 x enviro_plus_case.stl | 3 x foot.stl |
+|---|---|---|
+| ![bulkhead.stl](stls/bulkhead.png) | ![enviro_plus_case.stl](stls/enviro_plus_case.png) | ![foot.stl](stls/foot.png) 
+
+
+
+### Assembly instructions
+![case_assembly](assemblies/case_assembly.png)
+
+1. Solvent weld or glue the bulkhead into the recess in the bottom of the case.
+1. Fit the heatfit inserts with a soldering iron with a conical bit heated to about 200&deg;C.
+1. Tap the three holes for the feet with an M3 tap.
+1. Screw on the three feet with M3 x 6mm pan screws and washers.
+
+![case_assembled](assemblies/case_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="enviro_case_assembly"></a>
+## Enviro Case Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|4| Nut M2.5 x 2.2mm nyloc|
+|4| Screw M2.5 pan x  8mm|
+|4| Washer  M2.5 x 5.9mm x 0.5mm|
+
+
+### Sub-assemblies
+
+| 1 x case_assembly | 1 x enviro_assembly |
+|---|---|
+| ![case_assembled](assemblies/case_assembled_tn.png) | ![enviro_assembled](assemblies/enviro_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![enviro_case_assembly](assemblies/enviro_case_assembly.png)
+
+* Screw the Enviro+ PCB to the front of the case using M2.5 x 8mm pan screws with washer and nuts on the inside.
+
+![enviro_case_assembled](assemblies/enviro_case_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="RPI_case_assembly"></a>
+## RPI Case Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|2| Screw M2.5 pan x  6.4mm|
+
+
+### Sub-assemblies
+
+| 1 x RPI_assembly | 1 x enviro_case_assembly |
+|---|---|
+| ![RPI_assembled](assemblies/RPI_assembled_tn.png) | ![enviro_case_assembled](assemblies/enviro_case_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![RPI_case_assembly](assemblies/RPI_case_assembly.png)
+
+* Plug the RPi into the Enviro+ socket and secure with two screws self tapped into the bosses in the case.
+
+![RPI_case_assembled](assemblies/RPI_case_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="main_assembly"></a>
+## Main Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|4| Screw M2 cap x  6mm|
+|4| Washer  M2 x 5mm x 0.3mm|
+
+
+### Sub-assemblies
+
+| 1 x RPI_case_assembly | 1 x back_assembly |
+|---|---|
+| ![RPI_case_assembled](assemblies/RPI_case_assembled_tn.png) | ![back_assembled](assemblies/back_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![main_assembly](assemblies/main_assembly.png)
+
+* Solder the fan wires to the veroboard assembly
+
+![FanWires](docs/fan_connection.jpg)
+
+* Slide the back assembly into the case and secure with four M2 x 6mm cap screws and washers.
+
+![main_assembled](assemblies/main_assembled.png)
+
+<span></span>
+[Top](#TOP)

examples/EnviroPlus/scad/fan_controller.scad

@@ -0,0 +1,45 @@
+//
+//! Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
+//
+// GNU GPL v2
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// Top level model
+//
+
+include <NopSCADlib/core.scad>
+use <NopSCADlib/vitamins/veroboard.scad>
+include <NopSCADlib/vitamins/smds.scad>
+
+fan_vb = vero("fan_vb", "fan_controller", 6, 6, breaks = [[2, 1], [2 + eps, 5]],
+    components = [
+        [5, 3,    90, "link", inch(0.4), undef, undef, 2.5],
+        [0, 5,     0, "link", 0, 4, undef, 2.5],
+        [0, 1,     0, "link", 0, 4, undef, 2.5],
+        [0, 0,     0, "link", 0, 4, undef, 2.5],
+        [2, 5,     0, "-smd_res", RES0805, "3K3"],
+        [4, 4.7,  90, "-smd_cap", CAP1206, 1.2, "10uF"],
+        [2, 2.5, 180, "-smd_sot", SOT223, "FZT851"],
+    ],
+    joints = [[5, 1], [5, 5], [0, [0, 1, 5]]]
+ );
+
+//! The fan controller is a single transistor wired as a Miller integrator that effectively multiplies the capacitor value by the gain of the transistor.
+//! It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't whine, or stutter.
+//!
+//! ![Schematic](docs/fan_controller.jpg)
+//!
+//! ***
+//! * Make two track cuts as shown, one wide and the other narrow.
+//!
+//! ![TrackCuts](docs/cuts.jpg)
+//!
+//! 1. Add the SMT compeonents and then the wire links.
+//! 1. Add more solder around the transistor to act as a heatsink.
+//!
+//! ![SMT](docs/smt.jpg)
+//!
+module fan_controller_assembly() rotate(90) vflip(!exploded()) veroboard_assembly(fan_vb, -vero_thickness(fan_vb) - 1.4, 0);
+
+fan_controller_assembly();

examples/EnviroPlus/scad/main.scad

@@ -0,0 +1,518 @@
+//
+//! Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
+//
+// GNU GPL v2
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// Top level model
+//
+$explode = 0; // [0, 1]
+assembly = "main"; // [main, back, RPI, case, enviro_case, RPI_case]
+
+/* [Hidden] */
+
+show_box = true;
+show_enviroplus = true;
+$pp1_colour = "grey";
+$extrusion_width = 0.5;
+
+include <NopSCADlib/core.scad>
+include <NopSCADlib/vitamins/pin_headers.scad>
+include <NopSCADlib/vitamins/pcbs.scad>
+include <NopSCADlib/vitamins/fans.scad>
+
+use <NopSCADlib/vitamins/insert.scad>
+use <NopSCADlib/vitamins/veroboard.scad>
+use <NopSCADlib/utils/round.scad>
+use <NopSCADlib/printed/foot.scad>
+use <NopSCADlib/printed/printed_box.scad>
+use <fan_controller.scad>
+
+rpi = RPI0;
+pcb = EnviroPlus;
+fan = fan17x8;
+foot = Foot(d = 13, h = 5, t = 2, r = 1, screw = M3_pan_screw);
+module foot_stl() foot(foot);
+
+rpi_offset = [0, -pcb_width(pcb) / 2 + 0.5, pcb_width(rpi) / 2 + 8.6];
+rpi_holes = [0, 1];
+wall = 2;
+top_thickness = 2;
+base_thickness = 2;
+case_inner_rad = 8;
+
+width = pcb_length(pcb) + 9 + 10;
+pcb_x = -(width - pcb_length(pcb) - 9) / 2;
+depth = pcb_width(pcb) + 9;
+height = pcb_width(rpi) / 2 + rpi_offset.z + 9;
+bulkhead_outset = 2;
+bulkhead_inset = 0.5;
+bulkhead_t = 2;
+clearance = 0.1;
+pcb_screw = alternate_screw(hs_pan, pcb_screw(pcb));
+
+box = pbox(name = "enviro_plus_case", wall = wall, top_t = top_thickness, base_t = base_thickness, screw = M2_cap_screw, radius = case_inner_rad, ridges = [8, 1],
+    size = [width,  depth, height]);
+
+pms5003 = [50, 38, 21];
+pms5003_wall = 1;
+pms5003_pos = [width / 2 - pms5003.x / 2 - pms5003_wall - pbox_screw_inset(box) - insert_boss_radius(screw_insert(pbox_screw(box)), wall) - 0.5,
+               depth / 2 - pms5003.z / 2 - wall - 1,
+               height + top_thickness - pms5003.y / 2];
+
+
+fan_duct_t = 1.7;
+foam_t = 0;
+fan_pos = [pms5003_pos.x - pms5003.x / 2 - pms5003_wall - fan_width(fan) / 2 - fan_duct_t, 1 + foam_t, 12 + top_thickness + fan_depth(fan) / 2];
+fan_socket = 8;
+
+module fan_shape() {
+    w = fan_width(fan);
+    p = fan_hole_pitch(fan);
+    r = w / 2 - p;
+
+    rounded_square([w, w], r);
+}
+
+module fan_duct_stl() {
+    module frame(z, offset, y = -fan_pos.y)
+        translate([0, y, z])
+            linear_extrude(height = eps)
+                offset(offset)
+                    fan_shape();
+
+    z = height + top_thickness - fan_pos.z + fan_depth(fan) / 2 - fan_socket;
+
+    translate([0, -fan_pos.y, z])
+        linear_extrude(height = fan_socket)
+            difference() {
+                fan_shape();
+
+                round(1)
+                    offset(-fan_duct_t)
+                        fan_shape();
+            }
+
+    stl("fan_duct") union() {
+        difference() {
+            hull() {
+                frame(z, 0);
+
+                frame(fan_depth(fan), fan_duct_t + foam_t, 0);
+            }
+            hull() {
+                frame(z, -fan_duct_t);
+
+                frame(fan_depth(fan), foam_t -extrusion_width / 2, 0);
+            }
+        }
+
+        linear_extrude(height = fan_depth(fan))
+            difference() {
+                offset(fan_duct_t + foam_t)
+                    fan_shape();
+
+                offset(foam_t)
+                    fan_shape();
+            }
+    }
+}
+
+module pms5003() {
+    vitamin("pms5003(): PMS5003 particle detector");
+
+    w = pms5003.x;
+    d = pms5003.y;
+    h = pms5003.z;
+    t = 0.1;
+    color("silver")
+        difference() {
+            linear_extrude(height = h, center = true)
+                difference() {
+                    square([w, d], center = true);
+
+                    for(x = [-1, 1], y = [-1, 1])
+                        translate([x * w / 2, y * d / 2])
+                            square(2, center = true);
+                }
+            cube([w + 2 * eps, d + 2 * eps, t * 2], center = true);
+         }
+
+    color("black")
+        rounded_rectangle([w - 2 * t, d - 2 * t, h - 2 * t], r = 1, center = true);
+}
+
+module pcb_shape(offset)
+    rounded_square([pcb_length(pcb) + 2 * offset, pcb_width(pcb) + 2 * offset], pcb_radius(pcb) + offset);
+
+module gap() {
+    gap = pcb_component_position(pcb, "-chip");
+
+    translate([gap.x, -gap.y])
+        square([17.5, 20], center = true);
+}
+
+module rpi_holes()
+    for(i = rpi_holes) {
+        hole = pcb_coord(rpi, pcb_holes(rpi)[i]);
+        translate([hole.x, rpi_offset.y, -hole.y + rpi_offset.z + top_thickness])
+            rotate([90, 0, 0])
+                children();
+    }
+
+module feet_positions() {
+    clearance = 2;
+    foot_r = foot_diameter(foot) / 2;
+    x_inset = case_inner_rad + foot_r - pbox_ridges(box).y;
+    z_inset = foot_r + clearance;
+    h = height + base_thickness;
+
+    for(p = [[-1, -1], [1, -1], [0, 1]])
+        translate([p.x * (width / 2 - x_inset), depth / 2 + wall + pbox_ridges(box).y, top_thickness + h / 2 + p.y * (h / 2 - z_inset)])
+            rotate([90, 0, 0])
+                children();
+}
+
+module slots(h = 10, expand = 0) {
+    for(comp = [["uSD", 2, 11, 0.7], ["flat_flex", 1, 12, 0.5]]) {
+        p = pcb_component_position(rpi, comp[0]);
+        translate([sign(p.x) * (width / 2 + wall / 2 + pbox_ridges(box).y / 2), rpi_offset.y + pcb_thickness(rpi) + comp[3], top_thickness + rpi_offset.z - p.y])
+            rotate([90, 0, 90])
+                hull() {
+                    vertical_tearslot(r = comp[1] + expand, l = comp[2], h = h);
+
+                    if(expand)
+                         vertical_tearslot(r = comp[1] + expand + h / 2, l = comp[2], h = eps);
+                }
+     }
+}
+
+module box_internal_additions() {
+    translate([pcb_x, 0]) {
+        linear_extrude(height = top_thickness + bulkhead_t)
+            difference() {
+                pcb_shape(bulkhead_outset + wall + pbox_ridges(box).y + eps);
+
+                gap();
+
+                pcb_shape(bulkhead_outset + clearance);
+            }
+
+        rpi_holes()
+            hull() {
+                wall = 1.8;
+                r =  screw_radius(pcb_screw) + wall;
+                z = depth / 2 + rpi_offset.y + pbox_ridges(box).y + eps;
+                offset = max(r, z);
+                cylinder(r =r, h = z);
+
+                translate([0, -offset - r, z])
+                    cube(eps);
+            }
+    }
+    d = washer_diameter(screw_washer(foot_screw(foot))) + 1;
+    h = pbox_ridges(box).y;
+    feet_positions()
+        translate_z(wall - eps)
+            cylinder(d2 = d, d1 = d + 2 * h, h = h);
+
+    slots(wall + pbox_ridges(box).y + eps, 1);
+}
+
+module box_external_additions() {
+    amp = pbox_ridges(box).y + eps;
+    d = foot_diameter(foot) + 1;
+    feet_positions()
+        cylinder(d1 = d, d2 = d + 2 * amp, h = amp);
+
+    slots(wall + pbox_ridges(box).y + eps, 1);
+}
+
+
+module box_holes() {
+    translate([pcb_x, 0]) {
+        linear_extrude(height = top_thickness + eps)
+            pcb_shape(clearance);
+
+        rpi_holes()
+            teardrop_plus(r = screw_pilot_hole(pcb_screw), h = 7 - 1.6, center = false);
+    }
+    feet_positions()
+        teardrop(r = screw_pilot_hole(foot_screw(foot)), h = 10, center = true);
+
+    grills = 7;
+    bar = 1.6;
+    x = pcb_x + pcb_length(pcb) / 2 + 2 * wall +  pbox_ridges(box).y + 2 * eps;
+    w = width / 2 - x;
+    d = depth - case_inner_rad;
+    pitch = d / (grills - 1);
+    for(i = [0 : grills -1])
+        let(w = i == 0 || i == grills -1 ? w - 1 : w)
+            translate([x + w / 2, -d / 2 + i * pitch])
+                rounded_rectangle([w, pitch - bar, 10], 1);
+
+    slots();
+}
+
+module bulkhead_stl() {
+    holes = pcb_holes(pcb);
+    pitch = max([for(h = holes) pcb_coord(pcb, h).x]) - min([for(h = holes)  pcb_coord(pcb, h).x]);
+    boss_r = (pitch - 51.4) / 2;
+
+    stl("bulkhead")
+        linear_extrude(height = bulkhead_t)
+            difference() {
+                pcb_shape(bulkhead_outset);
+
+                gap();
+
+                difference() {
+                    pcb_shape(-bulkhead_inset);
+
+                    pcb_screw_positions(pcb)
+                        rotate($i * 90)
+                            hull() {
+                                circle(boss_r);
+
+                                translate([boss_r - eps, -boss_r])
+                                    square([eps, boss_r]);
+
+                                translate([-boss_r, boss_r - eps])
+                                    square([boss_r, eps]);
+
+                                translate([-boss_r, -boss_r])
+                                    square(eps);
+                            }
+                }
+
+                pcb_screw_positions(pcb)
+                    poly_circle(screw_clearance_radius(pcb_screw));
+            }
+}
+
+module enviro_plus_case_stl() {
+     pbox(box) {
+        box_internal_additions();
+        box_holes();
+        box_external_additions();
+     }
+}
+
+module base_additions() {
+    w = pms5003.x + clearance;
+    d = pms5003.z + clearance;
+    wall = pms5003_wall;
+
+    translate([pms5003_pos.x, -pms5003_pos.y])
+        linear_extrude(height = base_thickness + pms5003.y)
+            difference() {
+                square([w + 2 * wall, d + 2 * wall], center = true);
+                square([w, d], center = true);
+            }
+
+    translate([fan_pos.x, 0])
+        linear_extrude(height = top_thickness + fan_socket)
+            difference() {
+                offset(wall)
+                    fan_shape();
+
+                fan_shape();
+            }
+}
+
+module base_holes() {
+    for(i = [0 : 1]) {
+        p = pcb_component_position(rpi, "usb_uA", i);
+        translate([p.x + pcb_x, -rpi_offset.y - pcb_thickness(rpi) - 1.3])
+            rounded_rectangle([11,7, 100], 0.5, true);
+    }
+
+    translate([pms5003_pos.x, -pms5003_pos.y])
+        rounded_rectangle([pms5003.x - 2 ,pms5003.z - 2, 100], 2, true);
+
+    translate([fan_pos.x, 0])
+        linear_extrude(height = 2 * base_thickness + eps, center = true)
+            round(1)
+                offset(-fan_duct_t)
+                    fan_shape();
+}
+
+module enviro_plus_case_base_stl()
+    pbox_base(box) {
+        base_additions();
+        base_holes();
+    }
+
+//! * Solder a right angle connector to the Raspberry Pi Zero.
+module RPI_assembly()
+assembly("RPI") {
+    pcb(rpi);
+
+    pcb_grid(rpi, 9.5, 0.5, -0.6)
+        rotate(180)
+            explode(20)
+                pin_header(2p54header, 20, 2, right_angle = true);
+}
+
+//! 1. Solvent weld or glue the bulkhead into the recess in the bottom of the case.
+//! 1. Fit the heatfit inserts with a soldering iron with a conical bit heated to about 200&deg;C.
+//! 1. Tap the three holes for the feet with an M3 tap.
+//! 1. Screw on the three feet with M3 x 6mm pan screws and washers.
+module case_assembly() pose([ 29.60, 0.00, 158.00 ], exploded = true) pose([ 198.00, 0.00, 352.80 ], exploded = false)
+assembly("case") {
+    if(show_box)
+        stl_colour(pp1_colour) render() enviro_plus_case_stl();
+    else
+        render() difference() {
+            enviro_plus_case_stl();
+
+            translate_z(height / 2)
+                cube([100, 100, height - 20], center = true);
+        }
+
+    pbox_inserts(box);
+
+    translate([pcb_x, 0, top_thickness])
+        explode(20)
+            stl_colour(pp2_colour) render() bulkhead_stl();
+
+    feet_positions() {
+        foot_assembly(0, foot);
+
+        vflip()
+            explode(20, explode_children = true)
+                translate_z(foot_thickness(foot))
+                    screw_and_washer(foot_screw(foot), 6);
+    }
+
+}
+
+//! * Solder the fan_controller to the Enviro+ expansion connector at the 5V, GND and #4 pins.
+module enviro_assembly() hflip(exploded())
+assembly("enviro") {
+    if(show_enviroplus)
+        pcb(pcb);
+
+    pcb_grid(pcb, 5.5, 2.5, -pcb_thickness(pcb)) {
+        hflip()
+            explode(15)
+                fan_controller_assembly();
+    }
+    if(!exploded())
+        for(x = [8, 7, 3])
+            pcb_grid(pcb, x, 0, 0.05)
+                solder_meniscus(pcb, 0.39, 1);
+}
+
+//! * Screw the Enviro+ PCB to the front of the case using M2.5 x 8mm pan screws with washer and nuts on the inside.
+module enviro_case_assembly() pose([ 231.40, 0.00, 1.20 ])
+assembly("enviro_case") {
+    case_assembly();
+
+    translate([pcb_x, 0, top_thickness])
+        vflip() explode(20, explode_children = true) {
+            t = pcb_thickness(pcb);
+            nut = screw_nut(pcb_screw);
+            washer = screw_washer(pcb_screw);
+
+            no_explode() enviro_assembly();
+
+            pcb_screw_positions(pcb) {
+                translate_z(t)
+                    screw(pcb_screw, screw_longer_than(t + bulkhead_t + nut_thickness(nut, true) + washer_thickness(washer)));
+
+                translate_z(-bulkhead_t)
+                    vflip()
+                        explode(20, explode_children = true)
+                            nut_and_washer(nut, true);
+            }
+        }
+}
+
+//! * Plug the RPi into the Enviro+ socket and secure with two screws self tapped into the bosses in the case.
+module RPI_case_assembly() pose([ 20.50, 0.00, 153.30 ])
+assembly("RPI_case") {
+    enviro_case_assembly();
+
+    translate([pcb_x, 0]) {
+        translate_z(top_thickness) {
+
+            translate(rpi_offset)
+                rotate([-90, 0, 0])
+                    RPI_assembly();
+        }
+        rpi_holes()
+            vflip()
+                translate_z(pcb_thickness(rpi))
+                    screw(pcb_screw, 6.4);
+    }
+}
+
+//! 1. Print the fan duct in flexible TPE with low infill.
+//! 1. Slide the pms5003 into the printed receptacle with the fan to the outside. Secure with tape if it is loose.
+//! 1. Slide the fan into the fan duct.
+//! 1. Slide the fan duct into the printed recepacle.
+module back_assembly() pose([ 228.60, 0.00, 24.30 ])
+assembly("back") {
+    translate(pms5003_pos)
+        explode(-50)
+            rotate([90, 0, 0])
+                pms5003();
+
+    explode(-20, explode_children = true)
+        translate(fan_pos) {
+            explode(-20)
+                fan(fan);
+
+            translate_z(-fan_depth(fan) / 2)
+                stl_colour(pp4_colour)
+                    render()
+                        fan_duct_stl();
+        }
+
+    translate_z(height + top_thickness + base_thickness + eps) vflip()
+        stl_colour(show_box ? pp1_colour : pp2_colour) render() enviro_plus_case_base_stl();
+}
+
+//! * Solder the fan wires to the veroboard assembly
+//!
+//! ![FanWires](docs/fan_connection.jpg)
+//!
+//! * Slide the back assembly into the case and secure with four M2 x 6mm cap screws and washers.
+module main_assembly() pose([170, 335, 0], exploded = false) pose([ 42.20, 0.00, 159.60 ], exploded = true)
+assembly("main") {
+    RPI_case_assembly();
+
+    explode(20, explode_children = true) {
+        pbox_base_screws(box);
+
+        back_assembly();
+    }
+}
+
+if($preview) {
+    if(assembly == "main")
+        main_assembly();
+    else if(assembly == "case")
+        case_assembly();
+    else if(assembly == "back")
+        back_assembly();
+    else if(assembly == "RPI")
+        RPI_assembly();
+    else if(assembly == "RPI_case")
+        RPI_case_assembly();
+    else if(assembly == "enviro_case")
+        enviro_case_assembly();
+}
+else {
+    gap = 5;
+
+    enviro_plus_case_stl();
+
+    translate([0, -depth - gap])
+        enviro_plus_case_base_stl();
+
+    translate([0, -2 * (depth + gap)])
+        bulkhead_stl();
+}

libtest.scad

@@ -51,6 +51,7 @@ use <tests/blowers.scad>
 use <tests/box_sections.scad>
 use <tests/bulldogs.scad>
 use <tests/buttons.scad>
+use <tests/cable_clip.scad>
 use <tests/cable_strips.scad>
 use <tests/cameras.scad>
 use <tests/camera_housing.scad>
@@ -154,19 +155,46 @@ translate([x5 + 50, cable_grommets_y])
 translate([x5 + 95, cable_grommets_y])
     press_fits();
 
-translate([x5, cable_grommets_y + 60])
+fixing_blocks_y = cable_grommets_y + 60;
+translate([x5, fixing_blocks_y])
     fixing_blocks();
 
-translate([x5, cable_grommets_y + 90])
+corner_blocks_y = fixing_blocks_y + 30;
+translate([x5, corner_blocks_y])
     corner_blocks();
 
-translate([x5, cable_grommets_y + 160])
+feet_y = corner_blocks_y + 70;
+translate([x5, feet_y])
     feet();
 
-translate([x5 + 70, cable_grommets_y + 160])
+translate([x5 + 70, feet_y])
     screw_knobs();
 
-translate([x5, cable_grommets_y + 470]) {
+knobs_y = feet_y + 40;
+translate([640, knobs_y])
+    printed_pulley_test();
+
+translate([x5, knobs_y])
+    knobs();
+
+clips_y = knobs_y + 50;
+translate([x5, clips_y])
+    cable_clips();
+
+strap_y = clips_y + 50;
+translate([x5 + 60, strap_y])
+    strap_handles();
+
+handle_y = strap_y + 50;
+translate([x5, handle_y])
+    handle();
+
+pocket_y = handle_y + 70;
+translate([x5 + 65, pocket_y])
+    pocket_handles();
+
+hinge_y = pocket_y + 100;
+translate([x5, hinge_y]) {
     door_hinges()
         door_latches();
 
@@ -174,29 +202,14 @@ translate([x5, cable_grommets_y + 470]) {
         flat_hinges();
 }
 
-translate([x5, cable_grommets_y + 380])
-    no_explode() socket_boxes();
+pbox_y = hinge_y + 70;
+translate([900, pbox_y])
+    printed_boxes();
 
-translate([640, cable_grommets_y + 200])
-    printed_pulley_test();
-
-translate([x5, cable_grommets_y + 200])
-    knobs();
-
-translate([x5 + 60, cable_grommets_y + 250])
-    strap_handles();
-
-translate([x5, cable_grommets_y + 300])
-    handle();
-
-translate([950, 600])
+box_y = pbox_y + 150;
+translate([950, box_y])
     box_test();
 
-translate([900, 750])
-    pocket_handles();
-
-translate([900, 850])
-    printed_boxes();
 
 translate([950, 1400])
     rotate(-90)
@@ -427,6 +440,9 @@ translate([x2, extrusions_y])
 translate([400, transformers_y])
     transformers();
 
+translate([x4 + 50, transformers_y])
+    no_explode() socket_boxes();
+
 
 belts_y = 0;
 rails_y = belts_y + 200;

printed/box.scad

@@ -86,7 +86,6 @@ function box_screw_length(type, top) =
     let(s = top ? box_top_sheet(type) : box_base_sheet(type))
         screw_length(box_screw(type), sheet_thickness(s) + box_corner_gap(type) + box_profile_overlap(type) - 1, washers = 2, insert = true, longer = true);
 
-function box_wall_clearance(type) = box_sheet_slot(type) / 2 - sheet_thickness(box_sheets(type)) / 2;
 function box_margin(type) = box_profile_overlap(type) + box_corner_gap(type); //! How much the bezel intrudes on the specified height
 function box_intrusion(type) = box_hole_inset(type) + box_boss_r(type); //! Corner profile intrusion
 function sheet_reduction(type) = 2 * box_corner_gap(type) + sheet_end_clearance;

printed/cable_clip.scad

@@ -0,0 +1,117 @@
+//
+// NopSCADlib Copyright Chris Palmer 2022
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Cable clips to order. Can be for one or two cables of different sizes.
+//
+include <../core.scad>
+use <../vitamins/wire.scad>
+use <../utils/fillet.scad>
+
+wall = 2;
+
+function cable_clip_width(screw) = max(wall + 2 * screw_clearance_radius(screw) + wall, washer_diameter(screw_washer(screw))); //! Width given the `screw`.
+function cable_clip_height(cable) = cable_height(cable) + wall; //! Height given the `cable`.
+function cable_clip_extent(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) + wall; //! How far it extends from the screw.
+function cable_clip_offset(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) / 2; //! The offset of the cable from the screw
+
+module single_cable_clip(screw, cable, h = 0) {
+    screw_dia = 2 * screw_clearance_radius(screw);
+    height = cable_clip_width(screw);
+    depth = h ? h : cable_height(cable) + wall;
+    w = cable_width(cable);
+    width = wall + w + wall + screw_dia + wall;
+    hole_x = wall + w + wall + screw_dia / 2;
+    rad = min(wall + cable_wire_size(cable) / 2, depth / 2);
+    r = extrusion_width - eps;
+    translate([-hole_x, 0]) difference() {
+        linear_extrude(height)
+            difference() {
+                hull() {
+                    rounded_square([width, 1], r, center = false);
+
+                    translate([width - 1, 0])
+                        rounded_square([1, depth], r, center = false);
+
+                    translate([rad, depth - rad])
+                        circle(r = rad);
+                }
+
+                translate([wall + cable_width(cable) / 2, 0]) {
+                    hull() {
+                        for(p = cable_bundle_positions(cable))
+                            translate(p)
+                                circle(d = cable_wire_size(cable));
+
+                        square([w, eps], center = true);
+                    }
+                    for(side = [-1, 1])
+                        translate([side * w / 2, 0])
+                            hflip(side < 0)
+                                fillet(r = r, h = 0);
+                }
+            }
+
+        translate([hole_x, depth / 2, height / 2])
+            rotate([90,0,0])
+                teardrop_plus(h = depth + 1, r = screw_dia / 2, center = true);
+    }
+}
+
+
+module double_cable_clip(screw, cable1, cable2) {
+    h = max(cable_clip_height(cable1), cable_clip_height(cable2));
+    union() {
+        single_cable_clip(screw, cable1, h);
+
+        mirror([1,0,0]) single_cable_clip(screw, cable2, h);
+    }
+}
+
+module cable_clip(screw, cable1, cable2 = 0) { //! Create the STL for a single cable or two cable clip
+    function clip_str(screw) = str("cable_clip_", screw_radius(screw) * 20);
+    function cable_str(cable) = str("_", cable_wires(cable), "_", round(cable_wire_size(cable) * 10));
+
+    if(cable2) {
+        stl(str(clip_str(screw), cable_str(cable1), cable_str(cable2)));
+
+        double_cable_clip(screw, cable1, cable2);
+    }
+    else {
+        stl(str(clip_str(screw), cable_str(cable1)));
+
+        single_cable_clip(screw, cable1);
+    }
+}
+
+
+module cable_clip_assembly(screw, thickness, cable1, cable2 = 0) { //! Cable clip with the fasteners
+    height = max(cable_clip_height(cable1), cable2 ? cable_clip_height(cable2) : 0);
+
+    stl_colour(pp1_colour) render()
+        translate([0, cable_clip_width(screw) / 2]) rotate([90, 0, 0])
+            cable_clip(screw, cable1, cable2);
+
+    translate_z(height)
+        screw_and_washer(screw, screw_length(screw, height + thickness, 2, nyloc = true));
+
+    translate_z(-thickness)
+        vflip()
+            nut_and_washer(screw_nut(screw), true);
+}

printed/corner_block.scad

@@ -121,7 +121,7 @@ module corner_block(screw = def_screw, name = false) { //! Generate the STL for
 }
 
 module corner_block_assembly(screw = def_screw, name = false) //! The printed block with inserts
-assembly(str("corner_block_M", 20 * screw_radius(screw)), ngb = true) {
+assembly(name ? name : str("corner_block_M", 20 * screw_radius(screw)), ngb = true) {
     insert = screw_insert(screw);
 
     stl_colour(name ? pp2_colour : pp1_colour)
@@ -256,7 +256,7 @@ module 2screw_block(screw = def_screw, name = false) { //! Generate the STL for
 }
 
 module 2screw_block_assembly(screw = def_screw, name = false) //! The printed block with inserts
-assembly(str("2screw_block_M", 20 * screw_radius(screw)), ngb = true) {
+assembly(name ? name : str("2screw_block_M", 20 * screw_radius(screw)), ngb = true) {
     insert = screw_insert(screw);
 
     stl_colour(name ? pp2_colour : pp1_colour)

printed/pocket_handle.scad

@@ -137,7 +137,7 @@ module pocket_handle_assembly(type) { //! Assembly with fasteners in place
 
     translate_z(f.z + t / 2) hflip() {
         stl_colour(pp1_colour)
-            pocket_handle(type);
+            render() pocket_handle(type);
 
         pocket_handle_hole_positions(type) {
             translate_z(f.z + t)

printed/ribbon_clamp.scad

@@ -105,7 +105,7 @@ assembly(let(screw_d = screw_radius(screw) * 2)str("ribbon_clamp_", str_ways(way
 
 module ribbon_clamp_fastened_assembly(ways, thickness, screw = screw) { //! Clamp with fasteners in place
     tape_l = floor(ribbon_clamp_slot(ways));
-    tape_width = 25;
+    tape_width = ribbon_clamp_width(screw) + 2;
     tape_thickness = 0.5;
 
     vitamin(str(": Tape self amalgamating silicone ",tape_l," x 25mm"));

readme.md

@@ -23,30 +23,31 @@ A list of changes classified as breaking, additions or fixes is maintained in [C
 <th align="left"> Vitamins A-H </th><th align="left"> Vitamins I-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
 <tr><td> <a href = "#7_segments">7_segments</a> </td><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
 <tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
-<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
-<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
-<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
-<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
-<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
-<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Knob">Knob</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Terminals">Terminals</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Potentiometers">Potentiometers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_clip">Cable_clip</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
+<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
+<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
+<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
+<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
+<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
+<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Knob">Knob</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Terminals">Terminals</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Potentiometers">Potentiometers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td></td><td></td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
 </table>
 
 ---
@@ -108,7 +109,7 @@ Axial components for PCBs.
 | Module | Description |
 |:--- |:--- |
 | `ax_res(type, value, tol = 5, pitch = 0)` | Through hole axial resistor. If `pitch` is zero the minimum is used. If below the minimum the resistor is placed vertical. |
-| `wire_link(d, l, h = 1, tail = 3)` | Draw a wire jumper link. |
+| `wire_link(d, l, h = 1, tail = 3)` | Draw a wire jumper link. If `l` is zero then a vertical wire is drawn. |
 
 ![axials](tests/png/axials.png)
 
@@ -123,6 +124,7 @@ Axial components for PCBs.
 |   1 | `ax_res(res1_2, 8200)` |  Resistor 8200 Ohms 5% 0.5W |
 |   1 | `ax_res(res1_2, 8250, tol = 1)` |  Resistor 8250 Ohms 1% 0.5W |
 |   1 | `wire_link(0.8, 10.16)` |  Wire link 0.8mm x 0.4" |
+|   1 | `wire_link(0.8, 0, h = 5)` |  Wire link 0.8mm x 8mm |
 
 
 <a href="#top">Top</a>
@@ -2441,6 +2443,8 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `smd_resistor(RES0603, 1K)` |  SMD resistor 0603 1K 0.1W |
 |   1 | `smd_resistor(RES0805, 1K)` |  SMD resistor 0805 1K 0.125W |
 |   1 | `smd_resistor(RES1206, 1K)` |  SMD resistor 1206 1K 0.25W |
+|   1 | `smd_sot(SOT223)` |  SOT223 package LM117 |
+|   1 | `smd_sot(SOT23)` |  SOT23 package 2N7000 |
 |   1 | `square_button(button_4p5mm)` |  Square button 4.5mm |
 |   1 | `square_button(button_6mm)` |  Square button 6mm |
 |   1 | `pcb(TMC2130)` |  TMC2130 |
@@ -2457,6 +2461,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   2 | `vero_pin()` |  Vero board pin |
 |   1 | `wire_link(0.8, 5.08, h = 10.16)` |  Wire link 0.8mm x 0.2" |
 |   1 | `wire_link(0.8, 10.16)` |  Wire link 0.8mm x 0.4" |
+|   1 | `wire_link(0.8, 0, h = 5)` |  Wire link 0.8mm x 8mm |
 
 
 <a href="#top">Top</a>
@@ -3634,6 +3639,13 @@ Surface mount components for PCBs.
 | `smd_res_end_cap(type)` | End cap width |
 | `smd_res_power(type)` | Power rating in Watts |
 | `smd_res_size(type)` | Body length, width and height |
+| `smd_sot_lead_pitch(type)` | Lead pitch |
+| `smd_sot_lead_size(type)` | Lead width, foot depth, lead thickness |
+| `smd_sot_lead_span(type)` | Total span of leads |
+| `smd_sot_lead_z(type)` | Top of lead frame from top |
+| `smd_sot_size(type)` | Body length, width and height |
+| `smd_sot_tab_width(type)` | The wide lead at the top |
+| `smd_sot_z(type)` | Height above PCB surface |
 
 ### Functions
 | Function | Description |
@@ -3645,9 +3657,10 @@ Surface mount components for PCBs.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `smd_capacitor(type, height)` | Draw an SMD capacitor with specified height |
+| `smd_capacitor(type, height, value = undef)` | Draw an SMD capacitor with specified height |
 | `smd_led(type, colour, cutout)` | Draw an SMD LED with specified `colour` |
 | `smd_resistor(type, value)` | Draw an SMD resistor with specified value |
+| `smd_sot(type, value)` | Draw an SMD transistor |
 
 ![smds](tests/png/smds.png)
 
@@ -3662,6 +3675,8 @@ Surface mount components for PCBs.
 |   1 | `smd_resistor(RES0603, 1R0)` |  SMD resistor 0603 1R0 0.1W |
 |   1 | `smd_resistor(RES0805, 10M)` |  SMD resistor 0805 10M 0.125W |
 |   1 | `smd_resistor(RES1206, 100K)` |  SMD resistor 1206 100K 0.25W |
+|   1 | `smd_sot(SOT223)` |  SOT223 package FZT851 |
+|   1 | `smd_sot(SOT23)` |  SOT23 package 2N7000 |
 
 
 <a href="#top">Top</a>
@@ -4227,6 +4242,7 @@ Veroboard with mounting holes, track breaks, removed tracks, solder points and c
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| `vero(name, assembly, holes, strips, pitch = inch(0.1)` | Constructor |
 | `vero_length(type)` | Length of the board |
 | `vero_size(type)` | Board size |
 | `vero_thickness(type)` | Thickness of the substrate |
@@ -4237,6 +4253,7 @@ Veroboard with mounting holes, track breaks, removed tracks, solder points and c
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `solder_meniscus(type, ir = 0.3, r = undef)` | Draw a solder meniscus |
 | `vero_cutouts(type, angle = undef)` | Make cutouts to clear components |
 | `vero_grid_pos(type, x, y)` | Convert grid position to offset from the centre |
 | `vero_mounting_hole_positions(type)` | Positions children at the mounting holes |
@@ -4374,10 +4391,14 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| `cable(wires, size, colours, ribbon = false)` | Cable constructor |
 | `cable_bundle(cable)` | Arrangement of a bundle in a flat cable clip |
+| `cable_bundle_positions(cable)` | Positions of wires in a bundle to go through a cable strip |
 | `cable_height(cable)` | Height in flat clip |
+| `cable_is_ribbon(cable)` | Is a ribbon cable? |
 | `cable_radius(cable)` | Radius of a bundle of wires, see <http://mathworld.wolfram.com/CirclePacking.html>. |
 | `cable_width(cable)` | Width in flat clip |
+| `cable_wire_colours(cable)` | Individual wire colours |
 | `cable_wire_size(cable)` | Size of each wire in a bundle |
 | `cable_wires(cable)` | Number of wires in a bundle |
 | `wire_hole_radius(cable)` | Radius of a hole to accept a bundle of wires, rounded up to standard metric drill size |
@@ -4668,6 +4689,51 @@ fixing_blocks along the sides.
 |  12 | fixing_block_M30_assembly |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Cable_clip"></a>
+## Cable_clip
+Cable clips to order. Can be for one or two cables of different sizes.
+
+[printed/cable_clip.scad](printed/cable_clip.scad) Implementation.
+
+[tests/cable_clip.scad](tests/cable_clip.scad) Code for this example.
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `cable_clip_extent(screw, cable)` | How far it extends from the screw. |
+| `cable_clip_height(cable)` | Height given the `cable`. |
+| `cable_clip_offset(screw, cable)` | The offset of the cable from the screw |
+| `cable_clip_width(screw)` | Width given the `screw`. |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `cable_clip(screw, cable1, cable2 = 0)` | Create the STL for a single cable or two cable clip |
+| `cable_clip_assembly(screw, thickness, cable1, cable2 = 0)` | Cable clip with the fasteners |
+
+![cable_clip](tests/png/cable_clip.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   5 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
+|   2 | `screw(M3_dome_screw, 12)` |  Screw M3 dome x 12mm |
+|   3 | `screw(M3_dome_screw, 16)` |  Screw M3 dome x 16mm |
+|  10 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+
+### Printed
+| Qty | Filename |
+| ---:|:--- |
+|   1 | cable_clip_30_10_13.stl |
+|   1 | cable_clip_30_1_14_2_14.stl |
+|   1 | cable_clip_30_1_60.stl |
+|   1 | cable_clip_30_3_14_4_14.stl |
+|   1 | cable_clip_30_5_14_6_14.stl |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -6064,6 +6130,10 @@ Annotation used in this documentation
 ## Bezier
 Bezier curves and function to get and adjust the length or minimum z point.
 
+`bezier_join()` joins two paths with a Bezier curve that starts tangential to the end of `path1` and ends tangential to the end of `path2`.
+To do this the outer control points are the path ends and the inner two control points are along the tangents to the path ends.
+The only degree of freedom is how far along those tangents, which are the `d` and optional `d2` parameters.
+
 [utils/bezier.scad](utils/bezier.scad) Implementation.
 
 [tests/bezier.scad](tests/bezier.scad) Code for this example.
@@ -6074,6 +6144,7 @@ Bezier curves and function to get and adjust the length or minimum z point.
 | `adjust_bezier_length(v, l, eps = 0.001, r1 = 1.0, r2 = 1.5, l1, l2)` | Adjust Bezier control points `v` to get the required curve length `l` |
 | `adjust_bezier_z(v, z, eps = 0.001, r1 = 1, r2 = 1.5, z1, z2)` | Adjust Bezier control points `v` to get the required minimum `z` |
 | `bezier(t, v)` | Returns a point at distance `t` [0 - 1] along the curve with control points `v` |
+| `bezier_join(path1, path2, d, d2 = undef)` | Join two paths with a Bezier curve, control points are the path ends are `d` and `d2` from the ends in the same direction. |
 | `bezier_length(v, delta = 0.01, t = 0, length = 0)` | Calculate the length of a Bezier curve from control points `v` |
 | `bezier_min_z(v, steps = 100, z = inf, i = 0)` | Calculate the minimum z coordinate of a Bezier curve from control points `v` |
 | `bezier_path(v, steps = 100)` | Returns a Bezier path from control points `v` with `steps` segments |
@@ -6364,6 +6435,7 @@ Maths utilities for manipulating vectors and matrices.
 | `map(v, func)` | make a new vector where the func function argument is applied to each element of the vector v |
 | `mapi(v, func)` | make a new vector where the func function argument is applied to each element of the vector v. The func will get the index number as first argument, and the element as second argument. |
 | `nearly_zero(x)` | True if x is close to zero |
+| `path_length(path, i = 0, length = 0)` | Calculated the length along a path |
 | `quadratic_real_roots(a, b, c)` | Returns real roots of a quadratic equation, biggest first. Returns empty list if no real roots |
 | `radians(degrees)` | Convert radians to degrees |
 | `reduce(v, func, unity)` | reduce a vector v to a single entity by applying the func function recursively to the reduced value so far and the next element, starting with unity as the initial reduced value |
@@ -6565,6 +6637,12 @@ Subsequent rotations use the minimum rotation method.
 The path can be open or closed. If closed sweep ensures that the start and end have the same rotation to line up.
 An additional twist around the path can be specified. If the path is closed this should be a multiple of 360.
 
+`rounded_path()` can be used to generate a path of lines connected by arcs, useful for wire runs, etc.
+The vertices specify where the the path would be without any rounding.
+Each vertex, apart from the first and the last, has an associated radius and the path shortcuts the vertex with an arc specified by the radius.
+
+`spiral_paths()` makes a list of new paths that spiral around a given path. It can be used to make twisted wires that follow a rounded_path, for example.
+
 [utils/sweep.scad](utils/sweep.scad) Implementation.
 
 [tests/sweep.scad](tests/sweep.scad) Code for this example.
@@ -6578,14 +6656,18 @@ An additional twist around the path can be specified. If the path is closed this
 | `cap(facets, segment = 0, end)` | Create the mesh for an end cap |
 | `circle_points(r = 1, z = 0, dir = -1)` | Generate the points of a circle, setting z makes a single turn spiral |
 | `helical_twist_per_segment(r, pitch, sides)` | Calculate the twist around Z that rotate_from_to() introduces |
-| `path_length(path, i = 0, length = 0)` | Calculated the length along a path |
 | `rectangle_points(w, h)` | Generate the points of a rectangle |
+| `rounded_path(path)` | Convert a rounded_path, consisting of a start coordinate, vertex / radius pairs and then an end coordinate, to a path of points for sweep. |
+| `rounded_path_vertices(path)` | Show the unrounded version of a rounded_path for debug |
+| `segmented_path(path, min_segment)` | Add points to a path to enforce a minimum segment length |
 | `skin_faces(points, npoints, facets, loop, offset = 0)` | Create the mesh for the swept volume without end caps |
+| `spiral_paths(path, n, r, twists, start_angle)` | Create a new paths which sprial around the given path. Use for making twisted cables |
 | `sweep(path, profile, loop = false, twist = 0)` | Generate the point list and face list of the swept volume |
 
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `show_path(path)` | Show a path using a chain of hulls for debugging, duplicate points are highlighted. |
 | `sweep(path, profile, loop = false, twist = 0, convexity = 1)` | Draw a polyhedron that is the swept volume |
 
 ![sweep](tests/png/sweep.png)

tests/PCB.scad

@@ -59,7 +59,7 @@ test_pcb = ["test_pcb", "Test PCB",
     [ [3, 3], [3, -3], [-3, 3], [-3, -3] ],
     // components
     [
-        [ 20, -5, 180, "trimpot10"],
+        [ 20, -5,  180, "trimpot10"],
         [ 20, -15,  90, "trimpot10", true],
         [ 10,  2,   90, "smd_led", LED0805, "red"],
         [ 13,  2,   90, "smd_led", LED0603, "orange"],
@@ -69,6 +69,8 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 25,  2,   90, "smd_cap", CAP1206, 1.5],
         [ 28,  2,   90, "smd_cap", CAP0805, 1.0],
         [ 31,  2,   90, "smd_cap", CAP0603, 0.7],
+        [ 16,  6,  -90, "smd_sot", SOT23, "2N7000"],
+        [ 28,  20, -90, "smd_sot", SOT223, "LM117"],
 
         [ 10,  10,   0, "2p54header", 4, 1],
         [ 25,  10,   0, "2p54header", 5, 1, false, "blue" ],
@@ -87,6 +89,7 @@ test_pcb = ["test_pcb", "Test PCB",
         [  8, 155, 180, "usb_B"],
         [ 25, 200,   0, "buzzer", 4.5, 8.5],
         [ 25, 218,   0, "buzzer"],
+        [ 38, 190, -90, "text", 25, 4, "Silkscreen", "Liberation Sans:style=Bold"],
         [  8, 190, 180, "jack"],
         [  6, 200, 180, "barrel_jack"],
         [  5, 218, 180, "hdmi"],
@@ -99,6 +102,7 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 65,  22,   0, "ax_res", res1_2, 100000],
         [ 55,  22,   0, "vero_pin"],
         [ 55,  17,   0, "vero_pin", true],
+        [ 55,   9,   0, "link", 0, 5],
 
         [ 80,   9,   0, "link", inch(0.2), inch(0.4)],
         [ 80,  12,   0, "ax_res", res1_8, 1000000, 1, inch(0.1)],

tests/SMDs.scad

@@ -33,6 +33,11 @@ module smds() {
         layout([for(c = smd_capacitors) smd_cap_size(c).x], 1)
             let(c = smd_capacitors[$i])
                 smd_capacitor(c, smd_cap_size(c).y * 0.8);
+
+    translate([0, 12])
+        layout([for(s = smd_sots) smd_sot_size(s).x], 1)
+            let(s = smd_sots[$i])
+                smd_sot(s, ["2N7000", "FZT851"][$i]);
 }
 
 if($preview)

tests/axials.scad

@@ -28,6 +28,9 @@ module axials() {
         rotate(90)
             wire_link(0.8, inch(0.4));
 
+    pcb_grid(pcb, 0, 7)
+        wire_link(0.8, 0, 5);
+
     for(i = [0 : len(ax_resistors) - 1]) {
         pcb_grid(pcb, 2 * i + 2, 1 + [0, 0.5, 1.5][i])
             rotate(90)

tests/bezier.scad

@@ -77,6 +77,17 @@ module beziers() {
 
     translate(control_points[1] - [0, 0, 2])
         label(str("bezier_length = ", length, ", bezier_min_z = ", bezier_min_z(curve)), valign = "top");
+
+    path1 = [[20, 20,  0], [40, 20, 0]];
+    path2 = [[70, 40, -5], [60, 40, 0]];
+
+    color("green")
+        for(p = concat(path1, path2))
+            translate(p)
+                sphere(1);
+
+    color("orange")
+        sweep(bezier_join(path1, path2, 10), circle_points(0.5, $fn = 64));
 }
 
 if($preview)

tests/cable_clip.scad

@@ -0,0 +1,59 @@
+//
+// NopSCADlib Copyright Chris Palmer 2022
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+include <../core.scad>
+use <../printed/cable_clip.scad>
+use <../vitamins/wire.scad>
+
+
+sheet_thickness = 3;
+
+cables = [
+    for(i = [1 : 6]) [i, 1.4], [1, 6], 0, [10, inch(0.05), true], 0
+];
+
+screw = M3_dome_screw;
+
+
+module cable_clips() {
+    for(i = [0 : ceil(len(cables) / 2) - 1])
+        translate([i * 25, 0]) {
+            cable1 = cables[2 * i];
+            cable2 = cables[2 * i + 1];
+
+            if($preview) {
+                cable_clip_assembly(screw, sheet_thickness, cable1, cable2);
+
+                for(j = [0 : 1])
+                    let(cable = cables[2 * i + j])
+                        if(cable)
+                            let(positions = cable_bundle_positions(cable))
+                                for(i = [0 : len(positions) - 1])
+                                    let(p = positions[i])
+                                        translate([p.x + [-1, 1][j] * cable_clip_offset(screw, cable), 0, p.y])
+                                            rotate([90, 0, 0])
+                                                color([grey(20), "blue", "red", "orange", "yellow", "green", "brown", "purple", "grey", "white"][i])
+                                                    cylinder(d = cable_wire_size(cable), h = 30, center = true);
+            }
+            else
+                cable_clip(screw, cable1, cable2);
+        }
+}
+
+cable_clips();