Updated images.

Added 10mm ceramic disc capacitors.

CHANGELOG.md

@@ -3,6 +3,405 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
 
 
+### [v21.28.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.28.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.27.1...v21.28.0 "diff with v21.27.1")
+*   2024-09-30 [`e4b1b68`](https://github.com/nophead/NopSCADlib/commit/e4b1b686ff12a415c6109f311c6c36104d8a7b0c "show commit") [C.P.](# "Chris Palmer") Added `rd_cm_choke(),` `rd_coil()` and `spiral_wrap()`.
+Added 10mm ceramic disc capacitors.
+
+#### [v21.27.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.27.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.27.0...v21.27.1 "diff with v21.27.0")
+*   2024-09-13 [`c484ac2`](https://github.com/nophead/NopSCADlib/commit/c484ac2e8dbc8e9f9cb5051ce963250839a2705d "show commit") [C.P.](# "Chris Palmer") Updated libtest image with new D-connector.
+
+### [v21.27.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.27.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.26.0...v21.27.0 "diff with v21.26.0")
+*   2024-09-13 [`6da8452`](https://github.com/nophead/NopSCADlib/commit/6da845215bd2a4c3b7dc8a022579947cef27b8b8 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2024-09-10 [`7fe5aaa`](https://github.com/nophead/NopSCADlib/commit/7fe5aaac22283c453b2c2e5a2239b65ddd4320c1 "show commit") [D.T.](# "Daniel Trnka") Added DCONN37 connector
+
+### [v21.26.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.26.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.25.0...v21.26.0 "diff with v21.25.0")
+*   2024-09-02 [`4f073f9`](https://github.com/nophead/NopSCADlib/commit/4f073f97e815e5c0b469a07d20526f7e2b88d79d "show commit") [C.P.](# "Chris Palmer") Added `rod_ends.scad` to `lib.scad` and `lib_test.scad`.
+Fixed `rod_end` colours.
+Added new pulleys to the test list and reodered.
+Printed pulleys nopw shown in two rows.
+Updated images and readme.
+
+*   2024-08-23 [`fe3ce88`](https://github.com/nophead/NopSCADlib/commit/fe3ce88086de8480a88b69b7f7d2e6376b03caa6 "show commit") [T.](# "texas") adding test code for weld nuts and rod ends, adding ball bearings to test code list, and updating code for dome screw heads to use an angle to determine inset distance of the lower taper
+
+*   2024-08-16 [`37fe83e`](https://github.com/nophead/NopSCADlib/commit/37fe83e2e08b6a0bd23042e37fbe89122d78516c "show commit") [T.](# "texas") added chamfer distance variable to taper in the bottom of the dome heads
+
+*   2024-08-14 [`f86dfef`](https://github.com/nophead/NopSCADlib/commit/f86dfef919731f9731ca39f70ebd07b2c7204dfa "show commit") [T.](# "texas") fixed the calculations for dome screws to now use equations for a scaled sphere cap instead.  This allows for larger and smaller sizes than were previously possible, and also eliminates the need for that lift value.  Adding M6 and M8 dome screws as a result of this new ability
+
+*   2024-08-14 [`e97f9fd`](https://github.com/nophead/NopSCADlib/commit/e97f9fdacc87bbc31cb9f0f3474132bc09f5ed91 "show commit") [=.](# "=") adding weld nuts
+
+*   2024-08-13 [`ba45f85`](https://github.com/nophead/NopSCADlib/commit/ba45f8558007c7efe6bfd17bebacf285293ba4ad "show commit") [A.](# "alex") adding weld nuts, m4 and m6 for now
+
+*   2024-03-18 [`90fb9eb`](https://github.com/nophead/NopSCADlib/commit/90fb9eb01f8721cb48589e59a14b3770da250cd5 "show commit") [A.](# "alex") adding F625 ball bearing
+
+*   2024-03-13 [`905fc01`](https://github.com/nophead/NopSCADlib/commit/905fc016778d6a78774c05236425463fa2aa3323 "show commit") [A.](# "alex") adding rod end bearing and a yellow bed spring
+
+*   2024-03-04 [`a695974`](https://github.com/nophead/NopSCADlib/commit/a695974ac562b88ed08cc3ea54a2a4e07f638c5f "show commit") [T.](# "Tex") updating after maybe breaking debian
+
+### [v21.25.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.25.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.24.1...v21.25.0 "diff with v21.24.1")
+*   2024-08-15 [`bc7f294`](https://github.com/nophead/NopSCADlib/commit/bc7f294f995d8aa8ba500a1ef666c8fb50f94fd3 "show commit") [C.P.](# "Chris Palmer") Added `smd_250V_fuse()` and `rd_box_cap()`.
+Fixed missing value parameters from a lot of the SMD component instantiation examples.
+
+#### [v21.24.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.24.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.24.0...v21.24.1 "diff with v21.24.0")
+*   2024-06-30 [`07866f7`](https://github.com/nophead/NopSCADlib/commit/07866f72845c9e08c90e371c92315bab54f003c6 "show commit") [H.](# "Hermann-SW") Add `PT_camera` to examples and gallery
+
+### [v21.24.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.24.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.23.2...v21.24.0 "diff with v21.23.2")
+*   2024-06-30 [`53d1ea9`](https://github.com/nophead/NopSCADlib/commit/53d1ea93cd339d3fb6e085be9314d7ec0b547796 "show commit") [C.P.](# "Chris Palmer") Can now specify a rotation angle for a `geared_stepper's` shaft.
+
+#### [v21.23.2](https://github.com/nophead/NopSCADlib/releases/tag/v21.23.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.23.1...v21.23.2 "diff with v21.23.1")
+*   2024-06-12 [`b00709d`](https://github.com/nophead/NopSCADlib/commit/b00709da820e1241422b6e156b0c61157c18d63d "show commit") [C.P.](# "Chris Palmer") Image edge pixel changes due to new PC.
+
+*   2024-06-12 [`c76be23`](https://github.com/nophead/NopSCADlib/commit/c76be2386715b80bbbc9a71c99214df7f3c71bc7 "show commit") [C.P.](# "Chris Palmer") Fixed thread bug on threaded inserts revealed by latest OpenSCAD snapshot.
+
+*   2024-06-12 [`f6f348b`](https://github.com/nophead/NopSCADlib/commit/f6f348b76e7986927a571e1c07c3f866bcbeeafe "show commit") [C.P.](# "Chris Palmer") Fixed rocker slot height.
+
+#### [v21.23.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.23.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.23.0...v21.23.1 "diff with v21.23.0")
+*   2024-05-08 [`870b396`](https://github.com/nophead/NopSCADlib/commit/870b396574935603305462f1fea88564c909aad8 "show commit") [C.](# "Chris") Revoved strailing comma in `let()` in `splines.scad`.
+
+### [v21.23.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.23.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.22.0...v21.23.0 "diff with v21.22.0")
+*   2024-04-21 [`c1fdb2e`](https://github.com/nophead/NopSCADlib/commit/c1fdb2e701672b2404e34f224e77f21fb2ff34da "show commit") [C.P.](# "Chris Palmer") Dpdated images and readme.
+
+*   2024-04-20 [`cbe2c08`](https://github.com/nophead/NopSCADlib/commit/cbe2c085b72d0e5d9f0c6485d5fa7df0e172a4cc "show commit") [V.](# "V.Shcriabets") Add  RCWL-0516 PCB
+
+### [v21.22.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.22.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.21.0...v21.22.0 "diff with v21.21.0")
+*   2024-04-21 [`dbf930f`](https://github.com/nophead/NopSCADlib/commit/dbf930fd366c28aa9e581d9fe01e3654b882923a "show commit") [C.P.](# "Chris Palmer") Added cubic splines and Catmull Rom splines.
+
+### [v21.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.20.0...v21.21.0 "diff with v21.20.0")
+*   2024-04-21 [`97cea65`](https://github.com/nophead/NopSCADlib/commit/97cea65f41714acd31a3a3b968d8c133ce1a91d2 "show commit") [C.P.](# "Chris Palmer") Cable clips can now use inserts or nut traps.
+
+### [v21.20.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.20.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.19.2...v21.20.0 "diff with v21.19.2")
+*   2024-04-21 [`c7e912c`](https://github.com/nophead/NopSCADlib/commit/c7e912cd77e189ef729f94956245f1c6a9f72012 "show commit") [C.P.](# "Chris Palmer") A optional path can now be specified for tubing.
+
+#### [v21.19.2](https://github.com/nophead/NopSCADlib/releases/tag/v21.19.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.19.1...v21.19.2 "diff with v21.19.1")
+*   2024-04-21 [`f563645`](https://github.com/nophead/NopSCADlib/commit/f563645e45817a4f89ef3cb1be9d932310c485c6 "show commit") [C.P.](# "Chris Palmer") Corrected M2 `nut_trap_depth,` was too big.
+
+#### [v21.19.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.19.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.19.0...v21.19.1 "diff with v21.19.0")
+*   2024-04-21 [`2840cc2`](https://github.com/nophead/NopSCADlib/commit/2840cc2390a8e776add8ca3ef715abfc8d15dadc "show commit") [C.P.](# "Chris Palmer") Washer now uses `sweep.scad` instead of including it, leaking its interface.
+
+### [v21.19.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.19.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.18.0...v21.19.0 "diff with v21.18.0")
+*   2024-04-21 [`a5b2018`](https://github.com/nophead/NopSCADlib/commit/a5b20180083ba8d3014bc298cf0e28c20e6be437 "show commit") [C.P.](# "Chris Palmer") Added `offset_paths()` to `sweep.scad`.
+`show_path()` now takes an optional radius.
+
+### [v21.18.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.18.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.17.0...v21.18.0 "diff with v21.17.0")
+*   2024-03-14 [`19dadcb`](https://github.com/nophead/NopSCADlib/commit/19dadcb58db0dd7408726c69d46cf2b7b26c764b "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2024-03-14 [`c565f29`](https://github.com/nophead/NopSCADlib/commit/c565f2912e7319575fc6ec3262699b73305c46b4 "show commit") [V.](# "V.Shkriabets") Update MT3608 pcb module
+
+### [v21.17.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.17.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.16.1...v21.17.0 "diff with v21.16.1")
+*   2024-03-14 [`5579c0d`](https://github.com/nophead/NopSCADlib/commit/5579c0d988c6d7983d3884afa7e42fdb283109a8 "show commit") [C.P.](# "Chris Palmer") Fixed `box_shelf_bracket()` horizontal holes.
+Added a third child to `box_shelf_bracket()` to allow custom additions.
+
+*   2024-03-14 [`67408f8`](https://github.com/nophead/NopSCADlib/commit/67408f8422918416c617ec7389dbc09b2c62a2ae "show commit") [C.P.](# "Chris Palmer") Added `d_hole()` module.
+
+*   2024-03-14 [`929abbe`](https://github.com/nophead/NopSCADlib/commit/929abbefda2c380b121c775371f197860c6c3aff "show commit") [C.P.](# "Chris Palmer") Updated front page image.
+
+*   2024-03-14 [`c7727e7`](https://github.com/nophead/NopSCADlib/commit/c7727e7106e3829a6b5f6c501b1a082d540a4a68 "show commit") [C.P.](# "Chris Palmer") Added Sellotape to sheets.
+
+*   2024-03-14 [`1dbba5a`](https://github.com/nophead/NopSCADlib/commit/1dbba5a650f8dac2d05a5668008e61a5ec22ea4f "show commit") [C.P.](# "Chris Palmer") Added `camera_lens_height()` function.
+
+#### [v21.16.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.16.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.16.0...v21.16.1 "diff with v21.16.0")
+*   2024-03-14 [`db2a9a8`](https://github.com/nophead/NopSCADlib/commit/db2a9a8a24966f098d4c0c8157de98a885b79a85 "show commit") [C.P.](# "Chris Palmer") Ziptie test can now show wires with t `=` 0.
+
+*   2024-03-14 [`6ced9c8`](https://github.com/nophead/NopSCADlib/commit/6ced9c871c5a637dbe8494836a4233e1f6cd4971 "show commit") [C.P.](# "Chris Palmer") Fixed FOV for ESP32 camera being rotated.
+Shortened the ESP32 camera header pins.
+
+*   2024-03-14 [`d6b00fb`](https://github.com/nophead/NopSCADlib/commit/d6b00fbf5719239adc5e8b66f863c003a50806d3 "show commit") [C.P.](# "Chris Palmer") Removed unused test code.
+
+*   2024-03-14 [`2c996bb`](https://github.com/nophead/NopSCADlib/commit/2c996bb7a143a85c21833a69f56f2f47afabe072 "show commit") [C.P.](# "Chris Palmer") Fixed random error caused by not running bom first.
+
+### [v21.16.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.16.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.15.0...v21.16.0 "diff with v21.15.0")
+*   2024-02-19 [`fdb92ec`](https://github.com/nophead/NopSCADlib/commit/fdb92ec263d60a42e04f06abfeec5e1648a12b6b "show commit") [C.P.](# "Chris Palmer") Improved layout to fit into front page view.
+
+*   2024-02-18 [`f6404b9`](https://github.com/nophead/NopSCADlib/commit/f6404b939f714b3121dc6e9737cc24f3b9c64ebb "show commit") [J.R.](# "Jeroen Roos") Added T-Tracks and accessories
+
+### [v21.15.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.15.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.14.0...v21.15.0 "diff with v21.14.0")
+*   2024-02-19 [`30c67e7`](https://github.com/nophead/NopSCADlib/commit/30c67e742bb3603fa41b41e1a144989947e58ad7 "show commit") [C.P.](# "Chris Palmer") Updated the front page image.
+
+*   2024-02-12 [`efb1153`](https://github.com/nophead/NopSCADlib/commit/efb1153e2245fa67193cd7b49ac0926239c3b703 "show commit") [J.R.](# "Jeroen Roos") Add threaded inserts
+
+### [v21.14.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.14.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.13.1...v21.14.0 "diff with v21.13.1")
+*   2024-02-18 [`63a4271`](https://github.com/nophead/NopSCADlib/commit/63a4271c4c1bc97e93e67e8178515be1cfda9e43 "show commit") [C.P.](# "Chris Palmer") Updated libtest image.
+
+*   2024-02-18 [`0edf3a2`](https://github.com/nophead/NopSCADlib/commit/0edf3a2f75d729aa663836878d278226e7bd8094 "show commit") [C.P.](# "Chris Palmer") Cable clips can now handle up to 9 wires, have the nut and bolt flipped or use an insert.
+`cable_radius()` now handles cables with up to 20 wires.
+`cable_bundle()` and `cable_bundle_positions()` now handle bundles up to 9 wires.
+Added `cable_merge()`.
+
+#### [v21.13.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.13.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.13.0...v21.13.1 "diff with v21.13.0")
+*   2024-02-10 [`8540e04`](https://github.com/nophead/NopSCADlib/commit/8540e04a10d83be4ff454fa8999614e5137dd0ab "show commit") [C.P.](# "Chris Palmer") Metal hex pillars now chamfered.
+
+### [v21.13.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.13.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.12.0...v21.13.0 "diff with v21.12.0")
+*   2024-02-10 [`7947810`](https://github.com/nophead/NopSCADlib/commit/79478104d6b3a8673ae405606d2576ad98c4e90e "show commit") [C.P.](# "Chris Palmer") Dome option added to nut to draw acorn nuts.
+Chamfers added to nuts and hex head screws when manifold is used.
+
+*   2024-02-10 [`38196e9`](https://github.com/nophead/NopSCADlib/commit/38196e9f78f07d0f9a4eca0355cc6e99f29332fb "show commit") [C.P.](# "Chris Palmer") Mods to allow the manifold experimental option to be used.
+
+*   2024-02-05 [`9666c01`](https://github.com/nophead/NopSCADlib/commit/9666c018a0a99be8d24a2454a4c1448b09f83af0 "show commit") [C.P.](# "Chris Palmer") Made sheet overridable in `box_base_blank()`.
+
+### [v21.12.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.12.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.11.0...v21.12.0 "diff with v21.11.0")
+*   2024-02-05 [`38988ba`](https://github.com/nophead/NopSCADlib/commit/38988bacfa41dea19408b19cf06f134e51338ab0 "show commit") [C.P.](# "Chris Palmer") Updated images.
+
+*   2024-02-04 [`8298039`](https://github.com/nophead/NopSCADlib/commit/82980392c9c9d13aa4619db888bd38c620b09ac0 "show commit") [J.R.](# "Jeroen Roos") Add extra MDF thicknesses
+
+*   2024-02-05 [`1ce7b64`](https://github.com/nophead/NopSCADlib/commit/1ce7b64c73c77aa86f20c2b069ee031b30024818 "show commit") [C.P.](# "Chris Palmer") Updated image.
+
+*   2024-02-04 [`f85fdca`](https://github.com/nophead/NopSCADlib/commit/f85fdca051a3cd11a35bfe2424c50cc4da018de4 "show commit") [J.R.](# "Jeroen Roos") Add generating SVG file for CNC usage
+
+ * Generate SVG files, like DXF files for CNC usage
+
+*   2024-02-04 [`926dd8c`](https://github.com/nophead/NopSCADlib/commit/926dd8ca908030328d394dcc20e16ce036cbc51c "show commit") [C.P.](# "Chris Palmer") Reordered the PCB lists to fix the layout.
+Updated the images.
+
+*   2024-02-02 [`3961d7f`](https://github.com/nophead/NopSCADlib/commit/3961d7f1a4d3fd04a2fb174735d52ad8f95ecf7a "show commit") [L.B.](# "Lukas Burger") add HW-803 5V 1 way relay module
+
+*   2024-02-04 [`43b101a`](https://github.com/nophead/NopSCADlib/commit/43b101ae1eb063018b29eb97172722d1977c1c53 "show commit") [C.P.](# "Chris Palmer") Reordered the display list into reducing height for better layout.
+Updated the images.
+
+*   2024-01-31 [`1996189`](https://github.com/nophead/NopSCADlib/commit/1996189ab232820a16cfa4a4b2d627cf508d6eb9 "show commit") [L.B.](# "Lukas Burger") update readme file
+
+*   2024-01-30 [`9f8c309`](https://github.com/nophead/NopSCADlib/commit/9f8c3096435b7fea8a8870f07781a0f52adac7c3 "show commit") [L.B.](# "Lukas Burger") add display LCD2004A
+
+*   2024-02-04 [`e3ad327`](https://github.com/nophead/NopSCADlib/commit/e3ad32713dbb5dfab3a14d70f9c6f5f8aaaa59d1 "show commit") [C.](# "Chris") Rename `pcb_utils.scad` to `PCB_utils.scad`
+
+ * Fixed the filename case of `PCB_utils.scad`.
+
+*   2024-01-14 [`3995f68`](https://github.com/nophead/NopSCADlib/commit/3995f685dd31b087a2eec4cfe8b9f760f5eef3b9 "show commit") [C.P.](# "Chris Palmer") Removed debug `echo()`.
+
+### [v21.11.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.11.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.10.1...v21.11.0 "diff with v21.10.1")
+*   2024-01-14 [`41859ec`](https://github.com/nophead/NopSCADlib/commit/41859ec2245e3fee41cb9c79fb5a627193a4fec8 "show commit") [C.P.](# "Chris Palmer") Added `screw_thread_radius()` and `screw_angle()` functions.
+
+*   2024-01-14 [`cd95ef9`](https://github.com/nophead/NopSCADlib/commit/cd95ef95abed30e4004905972c9abcacdad0dc5e "show commit") [C.P.](# "Chris Palmer") Added GT2x12, GT3x6, GT3x9 and GT3x12 belts.
+
+*   2024-01-12 [`7a9e738`](https://github.com/nophead/NopSCADlib/commit/7a9e73830e16a843a14debb8d9b770243067cf63 "show commit") [C.P.](# "Chris Palmer") Belt part number is not always the same as the pitch.
+
+#### [v21.10.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.10.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.10.0...v21.10.1 "diff with v21.10.0")
+*   2023-12-01 [`ebe2dfd`](https://github.com/nophead/NopSCADlib/commit/ebe2dfd4fd8ba042b634030f7d463d0ba0d8c4cd "show commit") [C.P.](# "Chris Palmer") Fixed explode line position on short inserts.
+
+### [v21.10.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.10.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.9.1...v21.10.0 "diff with v21.9.1")
+*   2023-11-27 [`0137a43`](https://github.com/nophead/NopSCADlib/commit/0137a43a638777ecdf6b311579006c0922650a9c "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2023-11-12 [`72e5d1a`](https://github.com/nophead/NopSCADlib/commit/72e5d1abfb744ddcdf665b02ba7a1cf2b6bcff38 "show commit") [X.](# "XrXca") Update `pcbs.scad`
+
+ * Update `pcbs.scad`
+
+ * Update `pcbs.scad`
+
+ * Update `pcbs.scad`
+
+*   2023-11-27 [`b5afd7b`](https://github.com/nophead/NopSCADlib/commit/b5afd7bd41a1a46b7a1745c30755b3fb6c25b9a1 "show commit") [C.P.](# "Chris Palmer") ESP-01M added.
+
+#### [v21.9.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.9.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.9.0...v21.9.1 "diff with v21.9.0")
+*   2023-11-26 [`b9d1017`](https://github.com/nophead/NopSCADlib/commit/b9d101749eb2b19963299d85b75f0fa489fba552 "show commit") [C.P.](# "Chris Palmer") Updated images due to pixel differences on new PC
+
+*   2023-11-26 [`17979d3`](https://github.com/nophead/NopSCADlib/commit/17979d320539ca861300ecd4e42c01a913861066 "show commit") [C.P.](# "Chris Palmer") Fixed typo in comment.
+
+*   2023-10-30 [`73567ed`](https://github.com/nophead/NopSCADlib/commit/73567eda396214f1f882d62fb1d8a0ecbf2e7d94 "show commit") [C.P.](# "Chris Palmer") MULTIWATT11 package now generates a BOM entry.
+
+*   2023-10-30 [`f5c74a8`](https://github.com/nophead/NopSCADlib/commit/f5c74a8561f1e76f331c2d0027ecfd34bb2e7f3b "show commit") [C.P.](# "Chris Palmer") Corrected gallery.
+
+*   2023-10-30 [`04090b8`](https://github.com/nophead/NopSCADlib/commit/04090b816bfa3b6587cf6dcddbd54e5a94cb2420 "show commit") [C.P.](# "Chris Palmer") Updated the gallery.
+
+*   2023-10-29 [`06d4918`](https://github.com/nophead/NopSCADlib/commit/06d49186300b03bf4699cefbbcef0c0b8f7e9caa "show commit") [C.P.](# "Chris Palmer") Updated examples.
+
+### [v21.9.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.9.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.8.0...v21.9.0 "diff with v21.8.0")
+*   2023-10-29 [`2d091b9`](https://github.com/nophead/NopSCADlib/commit/2d091b9d16d33cf8b8751b2a436019c9032422a3 "show commit") [C.P.](# "Chris Palmer") Added a constructor function for PCBs.
+PCB text can now specify a colour.
+Added `SOT23_6,` `TSOT23_8` and CAP1210 SMD packages.
+Added ESP-201 Wifi Module PCB.
+Added ESP12F Wifi module.
+Added `tiny_buck` converter PCB.
+Made 2p54joiner a bit longer.
+Fixed SOIC gullwing shape.
+Added Wifi antennas.
+Added Yunpen filtered IEC mains inlet.
+Added power jack socket.
+Added right angle option for LEDs.
+Added `gear_motors`.
+Added 686ZZ and 696ZZ ball bearings.
+Added two larger box section tubes.
+Added right angle option to `square_buttons`. Doesn't draw the frame yet.
+Added multiwatt11 package for L6203.
+Added ONS9143A 13A mains socket.
+Added radial electrolytic capacitors.
+Added `LDE10_20B` PSU module.
+Added `screw_tearsink()` to make horizontal countersunk holes.
+Can now have solid tracks on veroboard.
+Added `veroboard_base()` module to make an STL for a base with spacers.
+Corrected M6 spring washer thickness.
+Can now specify the height of a solder meniscus.
+`slot()` now has a `center` option.
+Added `button_6mm_7` with a taller button.
+Added default fa, fs and fn constants used for drawing vitamins.
+These can be set via `$default_fa` and `$default_fs` that can also be set
+by environment variables: `NOPSCADLIB_DEFAULT_FA` and `NOPSCADLIB_DEFAULT_FS`.
+
+### [v21.8.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.8.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.7.0...v21.8.0 "diff with v21.7.0")
+*   2023-07-28 [`74293b6`](https://github.com/nophead/NopSCADlib/commit/74293b6c22c51c326e2d541d1a68a1cd63659c2b "show commit") [C.](# "Chris") Added axial diodes, radial transistors, discs and modules.
+Verboard and perboard components get solder menisci added automatically.
+Radial leads now made by bezier curves rather than straights and arcs.
+
+### [v21.7.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.7.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.6.1...v21.7.0 "diff with v21.6.1")
+*   2023-07-22 [`523fc9e`](https://github.com/nophead/NopSCADlib/commit/523fc9e9a5c8a566bde2bfe8555d5f6dddd8f05b "show commit") [C.](# "Chris") Adafruit Feather 405 contributed by Chris Lott.
+
+#### [v21.6.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.6.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.6.0...v21.6.1 "diff with v21.6.0")
+*   2023-07-22 [`09d2ffb`](https://github.com/nophead/NopSCADlib/commit/09d2ffb126cf9d9ad2d68171583e11708227b704 "show commit") [C.](# "Chris") Typo in comment fixed.
+
+*   2023-07-22 [`3c37035`](https://github.com/nophead/NopSCADlib/commit/3c370359c838a48d85e25709bcbced61249c237d "show commit") [C.](# "Chris") Make front page `readme.md` labels lower case as GitHub seems have stopped working with uppercase.
+
+### [v21.6.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.6.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.5.1...v21.6.0 "diff with v21.5.1")
+*   2023-07-22 [`e3cde64`](https://github.com/nophead/NopSCADlib/commit/e3cde64b61b6abfc4a2883e8aa32b66346fde1c4 "show commit") [C.](# "Chris") `open_bearing_theta()` now derived from `open_bearing_width()`.
+
+*   2023-07-22 [`e61ce02`](https://github.com/nophead/NopSCADlib/commit/e61ce0241443fb2c1f0585953bd3f7383b217086 "show commit") [C.](# "Chris") Moved things around for better test images.
+
+*   2023-07-22 [`f8e1256`](https://github.com/nophead/NopSCADlib/commit/f8e125654ed60842d6ca7f33a91377d9cb5f1dc9 "show commit") [C.](# "Chris") Rendred the 3D difference.
+
+*   2023-07-22 [`62b1511`](https://github.com/nophead/NopSCADlib/commit/62b1511c82eacb5124302aed36a52fe0d8104385 "show commit") [C.](# "Chris") Removed 3D difference for speed.
+
+*   2023-06-27 [`84d98a1`](https://github.com/nophead/NopSCADlib/commit/84d98a1081d38c56d5b02645a99223b7616fcd70 "show commit") [J.R.](# "Jeroen Roos") Added SBR rails
+
+ * This change adds
+- SBR rails. For now only SBR16
+- The bearing block that goes with it (SBR16UU)
+- An 'open' linear bearing (LM16UUOP) that is used by the bearing block
+- A 28mm circlip that has a wider opening than then normal circlip.
+`(circlip_28iw)`
+
+#### [v21.5.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.5.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.5.0...v21.5.1 "diff with v21.5.0")
+*   2023-06-29 [`5899ffe`](https://github.com/nophead/NopSCADlib/commit/5899ffe88f7952108ce928a5a6188b4aad5044c5 "show commit") [C.](# "Chris") More typos in comments.
+
+*   2023-06-28 [`b051311`](https://github.com/nophead/NopSCADlib/commit/b05131145caf500cd9198b1e9b9fafc69506b50f "show commit") [C.](# "Chris") Comment typo.
+
+### [v21.5.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.5.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.4.1...v21.5.0 "diff with v21.4.1")
+*   2023-05-08 [`c3f3d62`](https://github.com/nophead/NopSCADlib/commit/c3f3d629b1ff79d40cc5ad3efcb33e940d6c8056 "show commit") [C.P.](# "Chris Palmer") Added PanelDue V3.
+
+*   2023-05-08 [`c7ba052`](https://github.com/nophead/NopSCADlib/commit/c7ba052ccf24d764aa6460d4559e92596c9e4cf4 "show commit") [C.P.](# "Chris Palmer") Added SMD QFP package.
+
+*   2023-05-08 [`c2c5f50`](https://github.com/nophead/NopSCADlib/commit/c2c5f509860b909ca8fca5ffcc65dbef2f7177c5 "show commit") [C.P.](# "Chris Palmer") Can now used `smd_res()` to draw chokes.
+
+*   2023-05-08 [`d0ae8ca`](https://github.com/nophead/NopSCADlib/commit/d0ae8ca216108f53c9b8e60896ea9b59b845b7e0 "show commit") [C.P.](# "Chris Palmer") Added the ability to have more than one grid on a PCB.
+
+*   2023-05-08 [`e81dcfd`](https://github.com/nophead/NopSCADlib/commit/e81dcfdbd8163ce8e2db450f3a20c296c21327a8 "show commit") [C.P.](# "Chris Palmer") Added right angle option to box headers.
+
+#### [v21.4.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.4.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.4.0...v21.4.1 "diff with v21.4.0")
+*   2023-05-08 [`06a286d`](https://github.com/nophead/NopSCADlib/commit/06a286dc989e9cc8cf7918049cd16a862b1a9b94 "show commit") [C.P.](# "Chris Palmer") Fixed missing BOM entry for JST connectors.
+Fixed default colour for JST connectors.
+Corrected BOM entry to show right angle options on Molex and pin headers.
+
+*   2023-05-08 [`f5496c3`](https://github.com/nophead/NopSCADlib/commit/f5496c373a1ab8ae47d07cc0a52d76e4299876cc "show commit") [C.P.](# "Chris Palmer") Fixed typo in `smd_diode(DO214AC)` package name.
+
+### [v21.4.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.4.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.3.1...v21.4.0 "diff with v21.3.1")
+*   2023-05-01 [`5e24a32`](https://github.com/nophead/NopSCADlib/commit/5e24a32a0b422e8032c3c5d377c1a756ff6f1022 "show commit") [C.P.](# "Chris Palmer") Added ESP32 camera.
+
+*   2023-05-01 [`fbd8d8c`](https://github.com/nophead/NopSCADlib/commit/fbd8d8c7cdff0bd7de0d42aa74bf0ab6551c205b "show commit") [C.P.](# "Chris Palmer") Added `smd_coax`
+
+#### [v21.3.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.3.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.3.0...v21.3.1 "diff with v21.3.0")
+*   2023-04-29 [`b1592f5`](https://github.com/nophead/NopSCADlib/commit/b1592f51d4b16a125d9b28edae56f758fcac2f02 "show commit") [C.P.](# "Chris Palmer") Fixed `bom.py,` `views.py` and `tests.py` so that vitamin descriptions can contain more than one colon.
+
+### [v21.3.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.3.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.2.0...v21.3.0 "diff with v21.2.0")
+*   2023-04-23 [`61fc194`](https://github.com/nophead/NopSCADlib/commit/61fc19499524a2b750d17a90627a697bf626bbf0 "show commit") [C.P.](# "Chris Palmer") Refactored for readability.
+
+*   2023-04-23 [`f8af615`](https://github.com/nophead/NopSCADlib/commit/f8af61568a8362cf470bc9eb8de8323c8fc001c7 "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2023-04-23 [`05d1684`](https://github.com/nophead/NopSCADlib/commit/05d16841c4d48c5c8f453e438af0ff6eb5bffe53 "show commit") [C.P.](# "Chris Palmer") Fixed thread pitch.
+
+*   2023-04-05 [`07e7eb7`](https://github.com/nophead/NopSCADlib/commit/07e7eb77f73fcaab4291388b49781b0e2de5a64c "show commit") [M.B.](# "Martin Budden") Added support for shoulder screws.
+
+### [v21.2.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.2.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.1.2...v21.2.0 "diff with v21.1.2")
+*   2023-04-22 [`5fc70e1`](https://github.com/nophead/NopSCADlib/commit/5fc70e19ac5d320290f4a2151665e83f0829d796 "show commit") [C.P.](# "Chris Palmer") Added SMD Tantalum caps and 0502 and 0402 resistor and capacitors.
+
+#### [v21.1.2](https://github.com/nophead/NopSCADlib/releases/tag/v21.1.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.1.1...v21.1.2 "diff with v21.1.1")
+*   2023-03-29 [`1c5d9a8`](https://github.com/nophead/NopSCADlib/commit/1c5d9a8ef5892caf9b2c4d0d84dc3d20eba699d3 "show commit") [C.P.](# "Chris Palmer") Removed utility functions used by `invert()` from documentation as not generally useful.
+
+#### [v21.1.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.1.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.1.0...v21.1.1 "diff with v21.1.0")
+*   2023-03-29 [`d3f0bfc`](https://github.com/nophead/NopSCADlib/commit/d3f0bfc17f82b42f2d81f2d72a54c3f0cc375604 "show commit") [C.P.](# "Chris Palmer") Fixed typo in resistor comment.
+
+### [v21.1.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.1.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v21.0.1...v21.1.0 "diff with v21.0.1")
+*   2023-03-11 [`18cd33c`](https://github.com/nophead/NopSCADlib/commit/18cd33c66388d4d4e7be664c0f883cff0854524b "show commit") [C.](# "Chris") Fixed typos, corrected vitamin call, added boilerplate, updated images and readme.
+
+*   2023-03-11 [`ebfb330`](https://github.com/nophead/NopSCADlib/commit/ebfb330ac69f4e90de84ecffea94ce067d041031 "show commit") [D.K.](# "Dirkjan Krijnders") Added comments and make holes a `linear_extrude` result
+
+*   2023-03-08 [`c5fab08`](https://github.com/nophead/NopSCADlib/commit/c5fab08a454383b295be2b151fd715ee79b85db3 "show commit") [D.K.](# "Dirkjan Krijnders") Added `photo_interrupter` to the test
+
+*   2023-03-08 [`fecc937`](https://github.com/nophead/NopSCADlib/commit/fecc93746ab80ad1fc74f0fe3465de92ffee7b36 "show commit") [D.K.](# "Dirkjan Krijnders") Added vitamins for photo interrupters
+
+#### [v21.0.1](https://github.com/nophead/NopSCADlib/releases/tag/v21.0.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v21.0.0...v21.0.1 "diff with v21.0.0")
+*   2023-03-11 [`07da7d8`](https://github.com/nophead/NopSCADlib/commit/07da7d8dc7d3fb769e57a6b9ca86465357007b6c "show commit") [C.](# "Chris") Removed `Python2.7` from `usage.md` as no longer works.
+
+*   2023-03-10 [`5a3bbf9`](https://github.com/nophead/NopSCADlib/commit/5a3bbf967dc967eca4726af517382e7eb875dde1 "show commit") [C.](# "Chris") Fixed broken cover image.
+
+## [v21.0.0](https://github.com/nophead/NopSCADlib/releases/tag/v21.0.0 "show release") Breaking Changes [...](https://github.com/nophead/NopSCADlib/compare/v20.24.0...v21.0.0 "diff with v20.24.0")
+*   2023-03-10 [`9d4d5ab`](https://github.com/nophead/NopSCADlib/commit/9d4d5aba17974e7b5911e723d48d7b9403a4bcb4 "show commit") [C.](# "Chris") `veroboard_assembly()` renamed `veroboard_fastened_assembly()`.
+`veroboard_assembly()` now doesn't include the fasteners.
+
+### [v20.24.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.24.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.23.0...v20.24.0 "diff with v20.23.0")
+*   2023-03-10 [`d939401`](https://github.com/nophead/NopSCADlib/commit/d939401183d12af3452e17aa5b020dab50f8edb0 "show commit") [C.](# "Chris") Added `vero_grid_pos()` function.
+
+*   2023-03-10 [`584542f`](https://github.com/nophead/NopSCADlib/commit/584542f87a27efe06ff3ba597dbaff1f3c32c4fd "show commit") [C.](# "Chris") Added fastons.
+
+*   2023-03-10 [`62372a0`](https://github.com/nophead/NopSCADlib/commit/62372a049b9ac7a0fecebfd3618df91ff6ffa87a "show commit") [C.](# "Chris") The `wire()` module can now draw wires if a path is specified.
+
+*   2023-03-10 [`14698e5`](https://github.com/nophead/NopSCADlib/commit/14698e5203e1e860230ddb3729816730e221f49c "show commit") [C.](# "Chris") Added PTFE heatshrink sleeving.
+
+*   2023-03-10 [`14f6bb5`](https://github.com/nophead/NopSCADlib/commit/14f6bb533a3dcc1d36b2b764906cdca7d8d24484 "show commit") [C.](# "Chris") Added `sleeving_length` to `al_clad_resistor_assembly()`.
+
+*   2023-03-10 [`01e9aae`](https://github.com/nophead/NopSCADlib/commit/01e9aae698f57bac6046d1a04aaa11b0c88006b5 "show commit") [C.](# "Chris") Added `TO220_size()` and `TO220_lead_pos(i,` l).
+
+*   2023-02-04 [`27f9b24`](https://github.com/nophead/NopSCADlib/commit/27f9b242f250c0083344a05527055bb2fbb56f91 "show commit") [C.P.](# "Chris Palmer") Added crystal, transistors, diode and LEDs to Arduino Uno.
+
+*   2023-02-03 [`f07fda7`](https://github.com/nophead/NopSCADlib/commit/f07fda70cdfc743cd2462636fcc1eb13a092f9e4 "show commit") [C.P.](# "Chris Palmer") Wire links can now be sleeved.
+
+*   2023-02-01 [`abf1f1a`](https://github.com/nophead/NopSCADlib/commit/abf1f1ab3f3eddc2f274df649e8481a4117901eb "show commit") [C.P.](# "Chris Palmer") PCB blocks can now have rounded edges for more realistic cans.
+
+### [v20.23.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.23.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.22.0...v20.23.0 "diff with v20.22.0")
+*   2023-02-01 [`470d6d6`](https://github.com/nophead/NopSCADlib/commit/470d6d6216b1cef8ce6cafd4b14300edb62eac4a "show commit") [C.P.](# "Chris Palmer") Started radial components with crystals.
+
+*   2023-02-01 [`0e5e15a`](https://github.com/nophead/NopSCADlib/commit/0e5e15a747fed6b4ef434c9796bef6cb9e658c0e "show commit") [C.P.](# "Chris Palmer") Added SOIC14 package.
+
+*   2023-02-01 [`3f84912`](https://github.com/nophead/NopSCADlib/commit/3f84912e555cd4f7e97e7cac3091260fe969df4c "show commit") [C.P.](# "Chris Palmer") Added `rounded_top_rectangle()`.
+
+### [v20.22.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.22.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.21.0...v20.22.0 "diff with v20.21.0")
+*   2023-01-29 [`01eeafb`](https://github.com/nophead/NopSCADlib/commit/01eeafb2552a4fcc735e85e8d0e7c0855c18be8c "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2023-01-29 [`dd876c8`](https://github.com/nophead/NopSCADlib/commit/dd876c8fc9f2658332c1c3200a6a67e1b78a8f64 "show commit") [C.P.](# "Chris Palmer") Added vertical USB connector to PCB test.
+
+*   2023-01-29 [`ff40a27`](https://github.com/nophead/NopSCADlib/commit/ff40a276e1a37836ab011689e849da76ce19d4a7 "show commit") [C.P.](# "Chris Palmer") Fixed display position in tests.
+
+*   2023-01-29 [`463c620`](https://github.com/nophead/NopSCADlib/commit/463c620cc3053428ecf7ca6360477992b9538978 "show commit") [C.P.](# "Chris Palmer") Made a new row of PCBs in the test.
+
+*   2023-01-29 [`7b1a916`](https://github.com/nophead/NopSCADlib/commit/7b1a9160434f5b000c83f03d39305f73b0bbf646 "show commit") [C.P.](# "Chris Palmer") Fixed vAx1 dimensions, removed flange and repositioned the tongue.
+
+*   2023-01-28 [`de05134`](https://github.com/nophead/NopSCADlib/commit/de051343d01e57b5e0c43a5f8de69eb508bd86ca "show commit") [E.F.](# "Elliot Foster") WiP of an Orange Pi Zero 2 PCB
+
+### [v20.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.20.1...v20.21.0 "diff with v20.20.1")
+*   2023-01-28 [`34719c3`](https://github.com/nophead/NopSCADlib/commit/34719c33607f8720701eb59719af337cb4a1b777 "show commit") [C.P.](# "Chris Palmer") Box shelves now have screws in the corners to hold them down.
+
+*   2023-01-28 [`024439d`](https://github.com/nophead/NopSCADlib/commit/024439d4c2d0f302027d130584cedadb6d9d14a9 "show commit") [C.P.](# "Chris Palmer") Can now specify short inserts to be used for `butt_boxes`.
+
+#### [v20.20.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.20.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.20.0...v20.20.1 "diff with v20.20.0")
+*   2023-01-28 [`005c112`](https://github.com/nophead/NopSCADlib/commit/005c112ba9fc210f88fa82cf638108dbe0b20f26 "show commit") [C.P.](# "Chris Palmer") Added values to the SMD capacitors on the example PCB.
+
+*   2023-01-28 [`dfbcbf8`](https://github.com/nophead/NopSCADlib/commit/dfbcbf84ab57a2c70aaf5b1fa26668278b6993d3 "show commit") [C.P.](# "Chris Palmer") Changed OpenGrab link as `nicadrone.com` has gone.
+
+### [v20.20.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.20.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.19.1...v20.20.0 "diff with v20.19.1")
+*   2023-01-24 [`e7e9313`](https://github.com/nophead/NopSCADlib/commit/e7e9313e71fb2b30aca142ceded2dc5615695071 "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2023-01-23 [`dab06ce`](https://github.com/nophead/NopSCADlib/commit/dab06ce4ca771787aa625d1370b4f2b779580315 "show commit") [E.F.](# "Elliot Foster") Add Raspberry Pi 3 A+ to pcbs
+
+#### [v20.19.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.19.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.19.0...v20.19.1 "diff with v20.19.0")
+*   2023-01-24 [`494002a`](https://github.com/nophead/NopSCADlib/commit/494002aebeda560e65ca4f8cb3794707487a3c2a "show commit") [C.P.](# "Chris Palmer") Added test to MP1584EN PCB.
+
+*   2023-01-24 [`77e948f`](https://github.com/nophead/NopSCADlib/commit/77e948f43c911442211bcbf6d1b1520184d2c70b "show commit") [C.P.](# "Chris Palmer") Added can bus connectors to OpenGrab model.
+Tweaked some PCB component positions.
+
+*   2023-01-24 [`543cdb4`](https://github.com/nophead/NopSCADlib/commit/543cdb4e01d38308a06d4368ebabadb85c696567 "show commit") [C.P.](# "Chris Palmer") Increased the clearance of holes made for pin header.
+
+### [v20.19.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.19.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.18.1...v20.19.0 "diff with v20.18.1")
+*   2023-01-12 [`ebd50ba`](https://github.com/nophead/NopSCADlib/commit/ebd50bae535283b94b310ee74c9b98b2e3b7f8be "show commit") [C.P.](# "Chris Palmer") Added SMD diodes, inductors and potentiometers.
+Complete set of components added to MP1584EN buck regulator.
+
+#### [v20.18.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.18.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.18.0...v20.18.1 "diff with v20.18.0")
+*   2023-01-07 [`ec3e752`](https://github.com/nophead/NopSCADlib/commit/ec3e752fc5b5586ef5ac838c709ab4b704dac817 "show commit") [C.](# "Chris") Added missing documentation for `hinge_female()` module.
+
 ### [v20.18.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.18.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.17.0...v20.18.0 "diff with v20.17.0")
 *   2023-01-07 [`8587d52`](https://github.com/nophead/NopSCADlib/commit/8587d52d1b87dc9932c7e458798d4a6f3722a371 "show commit") [C.](# "Chris") Added `screw_keyhole()` module.
 
@@ -29,8 +428,6 @@ Client code now calls `dxf()` so that the generated files can be used to speed u
 
  * Change comment about nut sizes from radius to diameter.
 
-*   2022-09-29 [`d95e1e6`](https://github.com/nophead/NopSCADlib/commit/d95e1e64edba4ef51852a1e72d00497154c80c88 "show commit") [C.](# "Chris") Udated changelog.
-
 ### [v20.14.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.14.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.13.0...v20.14.0 "diff with v20.13.0")
 *   2022-09-29 [`f1737d2`](https://github.com/nophead/NopSCADlib/commit/f1737d257b54957772ab6faea102f8ddb829119b "show commit") [C.](# "Chris") Updated images and readme.
 
@@ -411,7 +808,7 @@ veroboard track cuts made slightly bigger.
 
 *   2021-10-01 [`042d809`](https://github.com/nophead/NopSCADlib/commit/042d809ed056ba55c32f1d850b81dcf559fe9134 "show commit") [C.P.](# "Chris Palmer") Resistor and thermistor wires made more round.
 
-*   2021-10-01 [`3864839`](https://github.com/nophead/NopSCADlib/commit/3864839e521eb64189cba8453ea8835d6ffadd75 "show commit") [C.P.](# "Chris Palmer") Fixed encoder breakout descripion typo.
+*   2021-10-01 [`3864839`](https://github.com/nophead/NopSCADlib/commit/3864839e521eb64189cba8453ea8835d6ffadd75 "show commit") [C.P.](# "Chris Palmer") Fixed encoder breakout description typo.
 
 *   2021-10-01 [`2ba2c2c`](https://github.com/nophead/NopSCADlib/commit/2ba2c2c115d4ab6c2371c662a3e54d7c77aa7785 "show commit") [C.P.](# "Chris Palmer") Removed some unused dependencies.
 
@@ -430,9 +827,9 @@ Lead length removed from TO220 and TO247 vitamin string.
 Mainly text spacing changes.
 
 *   2021-09-27 [`9b5ec6a`](https://github.com/nophead/NopSCADlib/commit/9b5ec6af1aba313df6812a5313470ebb7e8fbdd7 "show commit") [C.P.](# "Chris Palmer") Fixed new `rounded_polygon` to work with last OpenSCAD release.
-Trainling commas in `let()`.
+Trailing commas in `let()`.
 
-*   2021-09-27 [`50958b0`](https://github.com/nophead/NopSCADlib/commit/50958b064d5a6d5ca3fd6525a8c3d3a2c5b20199 "show commit") [C.P.](# "Chris Palmer") Added `$show_plugs` to show crude reprentations of housings on `pin_headers` and Molex KK headers.
+*   2021-09-27 [`50958b0`](https://github.com/nophead/NopSCADlib/commit/50958b064d5a6d5ca3fd6525a8c3d3a2c5b20199 "show commit") [C.P.](# "Chris Palmer") Added `$show_plugs` to show crude representations of housings on `pin_headers` and Molex KK headers.
 
 *   2021-09-27 [`c37373c`](https://github.com/nophead/NopSCADlib/commit/c37373c920d3b438895ef535b0c06d0d00675609 "show commit") [C.P.](# "Chris Palmer") Added `TO247()` and `TO247_size()` to `component.scad`.
 
@@ -773,7 +1170,7 @@ Changelog updated.
 
 *   2021-03-06 [`b83e567`](https://github.com/nophead/NopSCADlib/commit/b83e56713fbde2ac25e9750c369ae9cec4d67913 "show commit") [M.B.](# "Martin Budden") Reordered openscad command line parameters.
 
-*   2021-03-04 [`da4f9fb`](https://github.com/nophead/NopSCADlib/commit/da4f9fbdc31d2ceaa853c2fa0270e6961fde28b9 "show commit") [C.P.](# "Chris Palmer") Typo in `changlog.py` doc string.
+*   2021-03-04 [`da4f9fb`](https://github.com/nophead/NopSCADlib/commit/da4f9fbdc31d2ceaa853c2fa0270e6961fde28b9 "show commit") [C.P.](# "Chris Palmer") Typo in `changelog.py` doc string.
 
 *   2021-03-03 [`614e5f3`](https://github.com/nophead/NopSCADlib/commit/614e5f3a72db309a3dee996d7241317556883e8d "show commit") [C.P.](# "Chris Palmer") Issues in the changelog now link to to the issue.
 
@@ -956,7 +1353,7 @@ Smaller PCBs closer together to make space.
 *   2021-01-15 [`7f9122a`](https://github.com/nophead/NopSCADlib/commit/7f9122ae662ab0bd660e5c2f5ab6c507797030da "show commit") [C.P.](# "Chris Palmer") Added `--hardwarnings` to `openscad.py`
 
 ### [v10.33.0](https://github.com/nophead/NopSCADlib/releases/tag/v10.33.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v10.32.0...v10.33.0 "diff with v10.32.0")
-*   2021-01-15 [`93b260b`](https://github.com/nophead/NopSCADlib/commit/93b260b7b9a016e2afe1ab7df22f5c0c8c906708 "show commit") [C.P.](# "Chris Palmer") Added `screw_length()` to calculuate screw lengths includin washers, inserts and nuts.
+*   2021-01-15 [`93b260b`](https://github.com/nophead/NopSCADlib/commit/93b260b7b9a016e2afe1ab7df22f5c0c8c906708 "show commit") [C.P.](# "Chris Palmer") Added `screw_length()` to calculate screw lengths includin washers, inserts and nuts.
 
 ### [v10.32.0](https://github.com/nophead/NopSCADlib/releases/tag/v10.32.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v10.31.1...v10.32.0 "diff with v10.31.1")
 *   2021-01-13 [`8fea8f4`](https://github.com/nophead/NopSCADlib/commit/8fea8f437b4c4efe1aecf24cf8ddb6c8f006cad2 "show commit") [C.P.](# "Chris Palmer") Updated images and readme for green terminals.
@@ -1092,7 +1489,7 @@ Updated pics and readme.
 *   2020-12-28 [`f6f4fcc`](https://github.com/nophead/NopSCADlib/commit/f6f4fcc7e84e40669446708e2352ea68c49b7961 "show commit") [M.B.](# "Martin Budden") Added `M5_cs_cap` screw
 
 #### [v10.21.1](https://github.com/nophead/NopSCADlib/releases/tag/v10.21.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v10.21.0...v10.21.1 "diff with v10.21.0")
-*   2020-12-28 [`ba586b3`](https://github.com/nophead/NopSCADlib/commit/ba586b368582db163af143ebb60afed270f77b1c "show commit") [C.P.](# "Chris Palmer") Example images update to match new contersink screws and teardrops.
+*   2020-12-28 [`ba586b3`](https://github.com/nophead/NopSCADlib/commit/ba586b368582db163af143ebb60afed270f77b1c "show commit") [C.P.](# "Chris Palmer") Example images update to match new countersink screws and teardrops.
 
 ### [v10.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v10.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v10.20.1...v10.21.0 "diff with v10.20.1")
 *   2020-12-28 [`8d22940`](https://github.com/nophead/NopSCADlib/commit/8d22940506df525ac52ef6f8a00ea03661f3b682 "show commit") [C.P.](# "Chris Palmer") Project blurb can now be split with into sections with markdown horizontal rules
@@ -1314,7 +1711,7 @@ Updated images and readme.
 
 *   2020-11-13 [`0c9ae8d`](https://github.com/nophead/NopSCADlib/commit/0c9ae8d60c96d8c5b16adfce98081adc8e20b001 "show commit") [C.P.](# "Chris Palmer") PCBs now drawn before components so that transparent LEDs draw correctly.
 
-*   2020-11-12 [`9a0bad4`](https://github.com/nophead/NopSCADlib/commit/9a0bad4e61acbd0ae27ef5c2d324d88deb7ee672 "show commit") [C.P.](# "Chris Palmer") Made stepper motor encap paramatric.
+*   2020-11-12 [`9a0bad4`](https://github.com/nophead/NopSCADlib/commit/9a0bad4e61acbd0ae27ef5c2d324d88deb7ee672 "show commit") [C.P.](# "Chris Palmer") Made stepper motor encap parametric.
 Made connector position based on encap height and added PCB.
 
 *   2020-11-12 [`9004781`](https://github.com/nophead/NopSCADlib/commit/90047815b0189c628c96807785d0d93a4895d411 "show commit") [C.P.](# "Chris Palmer") Added JST PH connectors.
@@ -1370,7 +1767,7 @@ Reverted the jst header pin position change.
 
 *   2020-09-20 [`933fea6`](https://github.com/nophead/NopSCADlib/commit/933fea687c54d7d8ec48fe92aae12ffca0666789 "show commit") [C.P.](# "Chris Palmer") Removed debug code
 
-*   2020-09-19 [`a7803b1`](https://github.com/nophead/NopSCADlib/commit/a7803b1efbf92c5e27f3171d7e2a92634fa2d84f "show commit") [C.P.](# "Chris Palmer") Improved numerical accuarcy of catenary calculations.
+*   2020-09-19 [`a7803b1`](https://github.com/nophead/NopSCADlib/commit/a7803b1efbf92c5e27f3171d7e2a92634fa2d84f "show commit") [C.P.](# "Chris Palmer") Improved numerical accuracy of catenary calculations.
 
 ### [v9.7.0](https://github.com/nophead/NopSCADlib/releases/tag/v9.7.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v9.6.1...v9.7.0 "diff with v9.6.1")
 *   2020-09-19 [`1255e71`](https://github.com/nophead/NopSCADlib/commit/1255e712719ce66fd3b231e5c212ea69b0bb9f1c "show commit") [C.P.](# "Chris Palmer") Added catenary curves.
@@ -1443,7 +1840,7 @@ Reduced J-Head inset.
 Removed J-Head MK4.
 
 ### [v9.2.0](https://github.com/nophead/NopSCADlib/releases/tag/v9.2.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v9.1.1...v9.2.0 "diff with v9.1.1")
-*   2020-08-13 [`2419d50`](https://github.com/nophead/NopSCADlib/commit/2419d5064182d63634183a5762c995d0bdfacf0a "show commit") [C.P.](# "Chris Palmer") Added more PTFE tube sizes and amde them whiter.
+*   2020-08-13 [`2419d50`](https://github.com/nophead/NopSCADlib/commit/2419d5064182d63634183a5762c995d0bdfacf0a "show commit") [C.P.](# "Chris Palmer") Added more PTFE tube sizes and made them whiter.
 
 *   2020-08-13 [`02211c2`](https://github.com/nophead/NopSCADlib/commit/02211c20348ef4f134c0d3c734a5d922fe9a9a3c "show commit") [C.P.](# "Chris Palmer") Added `tubing_or()` and `center` option.
 
@@ -1978,7 +2375,7 @@ already included by other vitamins.
 
 *   2020-02-24 [`065ec0a`](https://github.com/nophead/NopSCADlib/commit/065ec0a430da6c62cbd6d06b3de822e8a6751425 "show commit") [C.P.](# "Chris Palmer") Corrected nut placement
 
-*   2020-02-24 [`e7eea05`](https://github.com/nophead/NopSCADlib/commit/e7eea0520c7e4bd20e505084d7c17a64a915ef75 "show commit") [C.P.](# "Chris Palmer") T nut thickness no longer includes the stem to simplyfy placement and screw
+*   2020-02-24 [`e7eea05`](https://github.com/nophead/NopSCADlib/commit/e7eea0520c7e4bd20e505084d7c17a64a915ef75 "show commit") [C.P.](# "Chris Palmer") T nut thickness no longer includes the stem to simplify placement and screw
 length calculations.
 
 *   2020-02-24 [`5cb994b`](https://github.com/nophead/NopSCADlib/commit/5cb994b58b204a9f59d17001e4061aa5f60328bc "show commit") [C.P.](# "Chris Palmer") Retabulated nut table
@@ -2198,7 +2595,7 @@ Both added to the insert test.
 
 *   2019-08-18 [`e35fb69`](https://github.com/nophead/NopSCADlib/commit/e35fb695a21a42216b7f5b58c12b6bc5d3a43eff "show commit") [C.P.](# "Chris Palmer") Ziptie width added to BOM description.
 
-*   2019-08-18 [`61bec65`](https://github.com/nophead/NopSCADlib/commit/61bec656d7d9328a6eb90ca003d5ae5888e5a18c "show commit") [C.P.](# "Chris Palmer") Fixed box header BOM descripion.
+*   2019-08-18 [`61bec65`](https://github.com/nophead/NopSCADlib/commit/61bec656d7d9328a6eb90ca003d5ae5888e5a18c "show commit") [C.P.](# "Chris Palmer") Fixed box header BOM description.
 
 *   2019-08-18 [`854adab`](https://github.com/nophead/NopSCADlib/commit/854adab6650e7617588e2da821cd91fa97657eaa "show commit") [C.P.](# "Chris Palmer") Fix for Python 2
 

docs/usage.md

@@ -2,7 +2,7 @@
 
 ## Requirements
 1. OpenSCAD 2021.01 or later, download it from here: https://www.openscad.org/downloads.html
-1. Python 2.7+ or 3.6+ from https://www.python.org/downloads/
+1. Python 3.6+ from https://www.python.org/downloads/
 1. ImageMagick 7 www.imagemagick.org
 
 These are all cross platform tools so NopSCADlib should work on any platform that supports them, although it has currently only been tested on Win7.
@@ -30,7 +30,7 @@ The `NopSCADlib/scripts` directory needs to be added to the executable search pa
 
 Note that on Linux and OSX the full file name including the `.py` will be needed.
 
-The installation can be tested by opening `NopSCADlib/libtest.scad` in the OpenSCAD GUI. It should render all the objects in the library in about 1 minute.
+The installation can be tested by opening `NopSCADlib/libtest.scad` in the OpenSCAD GUI. It should render all the objects in the library in about 2 minutes.
 
 Running `tests` from the command line will run all the tests in the `tests` directory and build the `readme.md` catalog for GitHub and render it to `readme.html`
 for local preview.

examples/EnviroPlus/bom/bom.csv

@@ -1,6 +1,6 @@
 'Micro SD card',  1
 'Fan 17mm x 8mm',  1
-'Heatfit insert M2',  4
+'Heatfit insert M2 x 4mm',  4
 'Nut M2.5 x 2.2mm nyloc',  4
 'Enviro+',  1
 'Raspberry Pi Zero',  1
@@ -13,7 +13,7 @@
 'SMD capacitor 1206 10uF',  1
 'SMD resistor 0805 3K3 0.125W',  1
 'SOT223 package FZT851',  1
-'Veroboard 6 holes x 6strips',  1
+'Veroboard 6 holes x 6 strips',  1
 'Washer  M2 x 5mm x 0.3mm',  4
 'Washer  M2.5 x 5.9mm x 0.5mm',  4
 'Washer  M3 x 7mm x 0.5mm',  3

examples/EnviroPlus/bom/bom.json

@@ -49,13 +49,13 @@
     },
     {
         "name": "fan_controller_assembly",
-        "big": null,
+        "big": true,
         "ngb": false,
         "zoomed": 0,
         "count": 1,
         "assemblies": {},
         "vitamins": {
-            "veroboard(fan_vb): Veroboard 6 holes x 6strips": {
+            "veroboard(fan_vb): Veroboard 6 holes x 6 strips": {
                 "count": 1
             },
             "wire_link(0.8, 10.16, tail = 2.5): Wire link 0.8mm x 0.4\"": {
@@ -102,7 +102,7 @@
         "count": 1,
         "assemblies": {},
         "vitamins": {
-            "insert(F1BM2): Heatfit insert M2": {
+            "insert(F1BM2): Heatfit insert M2 x 4mm": {
                 "count": 4
             },
             "washer(M3_washer): Washer  M3 x 7mm x 0.5mm": {

examples/EnviroPlus/bom/bom.txt

@@ -15,7 +15,7 @@ Vitamins:
  i  e  k  e  o  e  r  n
  1|  |  |  |  |  |  |  |  1 Micro SD card
   |  | 1|  |  |  |  |  |  1 Fan 17mm x 8mm
-  |  |  | 4|  |  |  |  |  4 Heatfit insert M2
+  |  |  | 4|  |  |  |  |  4 Heatfit insert M2 x 4mm
   |  |  |  |  | 4|  |  |  4 Nut M2.5 x 2.2mm nyloc
   |  |  |  | 1|  |  |  |  1 Enviro+
  1|  |  |  |  |  |  |  |  1 Raspberry Pi Zero
@@ -28,7 +28,7 @@ Vitamins:
   |  |  |  |  |  | 1|  |  1 SMD capacitor 1206 10uF
   |  |  |  |  |  | 1|  |  1 SMD resistor 0805 3K3 0.125W
   |  |  |  |  |  | 1|  |  1 SOT223 package FZT851
-  |  |  |  |  |  | 1|  |  1 Veroboard 6 holes x 6strips
+  |  |  |  |  |  | 1|  |  1 Veroboard 6 holes x 6 strips
   |  |  |  |  |  |  | 4|  4 Washer  M2 x 5mm x 0.3mm
   |  |  |  |  | 4|  |  |  4 Washer  M2.5 x 5.9mm x 0.5mm
   |  |  | 3|  |  |  |  |  3 Washer  M3 x 7mm x 0.5mm

examples/EnviroPlus/bom/case_assembly.txt

@@ -1,6 +1,6 @@
 case_assembly:
 Vitamins:
-  4 Heatfit insert M2
+  4 Heatfit insert M2 x 4mm
   3 Screw M3 pan x  6mm
   3 Washer  M3 x 7mm x 0.5mm
 

examples/EnviroPlus/bom/fan_controller_assembly.txt

@@ -3,6 +3,6 @@ Vitamins:
   1 SMD capacitor 1206 10uF
   1 SMD resistor 0805 3K3 0.125W
   1 SOT223 package FZT851
-  1 Veroboard 6 holes x 6strips
+  1 Veroboard 6 holes x 6 strips
   3 Wire link 0.8mm x 6.5mm
   1 Wire link 0.8mm x 0.4"

examples/EnviroPlus/readme.md

@@ -29,7 +29,7 @@ Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
 |  |  |  |  |  |  |  |  | | **Vitamins** |
 |   .  |   .  |   .  |   1  |   .  |   .  |   .  |   .  |    1  |    Enviro+ |
 |   1  |   .  |   .  |   .  |   .  |   .  |   .  |   .  |    1  |    Fan 17mm x 8mm |
-|   .  |   .  |   .  |   .  |   4  |   .  |   .  |   .  |    4  |    Heatfit insert M2 |
+|   .  |   .  |   .  |   .  |   4  |   .  |   .  |   .  |    4  |    Heatfit insert M2 x 4mm |
 |   .  |   1  |   .  |   .  |   .  |   .  |   .  |   .  |    1  |    Micro SD card |
 |   .  |   .  |   .  |   .  |   .  |   4  |   .  |   .  |    4  |    Nut M2.5 x 2.2mm nyloc |
 |   1  |   .  |   .  |   .  |   .  |   .  |   .  |   .  |    1  |    PMS5003 particle detector |
@@ -42,7 +42,7 @@ Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
 |   .  |   .  |   .  |   .  |   .  |   .  |   2  |   .  |    2  |    Screw M2.5 pan x  6.4mm |
 |   .  |   .  |   .  |   .  |   .  |   4  |   .  |   .  |    4  |    Screw M2.5 pan x  8mm |
 |   .  |   .  |   .  |   .  |   3  |   .  |   .  |   .  |    3  |    Screw M3 pan x  6mm |
-|   .  |   .  |   1  |   .  |   .  |   .  |   .  |   .  |    1  |    Veroboard 6 holes x 6strips |
+|   .  |   .  |   1  |   .  |   .  |   .  |   .  |   .  |    1  |    Veroboard 6 holes x 6 strips |
 |   .  |   .  |   .  |   .  |   .  |   .  |   .  |   4  |    4  |    Washer  M2 x 5mm x 0.3mm |
 |   .  |   .  |   .  |   .  |   .  |   4  |   .  |   .  |    4  |    Washer  M2.5 x 5.9mm x 0.5mm |
 |   .  |   .  |   .  |   .  |   3  |   .  |   .  |   .  |    3  |    Washer  M3 x 7mm x 0.5mm |
@@ -121,13 +121,13 @@ Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
 |1| SMD capacitor 1206 10uF|
 |1| SMD resistor 0805 3K3 0.125W|
 |1| SOT223 package FZT851|
-|1| Veroboard 6 holes x 6strips|
+|1| Veroboard 6 holes x 6 strips|
 |1| Wire link 0.8mm x 0.4"|
 |3| Wire link 0.8mm x 6.5mm|
 
 
 ### Assembly instructions
-![fan_controller_assembly](assemblies/fan_controller_assembly_tn.png)
+![fan_controller_assembly](assemblies/fan_controller_assembly.png)
 
 The fan controller is a single transistor wired as a Miller integrator that effectively multiplies the capacitor value by the gain of the transistor.
 It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't whine, or stutter.
@@ -145,7 +145,7 @@ It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't
 ![SMT](docs/smt.jpg)
 
 
-![fan_controller_assembled](assemblies/fan_controller_assembled_tn.png)
+![fan_controller_assembled](assemblies/fan_controller_assembled.png)
 
 <span></span>
 [Top](#TOP)
@@ -168,11 +168,11 @@ It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't
 
 
 ### Assembly instructions
-![enviro_assembly](assemblies/enviro_assembly_tn.png)
+![enviro_assembly](assemblies/enviro_assembly.png)
 
 * Solder the fan_controller to the Enviro+ expansion connector at the 5V, GND and #4 pins.
 
-![enviro_assembled](assemblies/enviro_assembled_tn.png)
+![enviro_assembled](assemblies/enviro_assembled.png)
 
 <span></span>
 [Top](#TOP)
@@ -183,7 +183,7 @@ It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't
 ### Vitamins
 |Qty|Description|
 |---:|:----------|
-|4| Heatfit insert M2|
+|4| Heatfit insert M2 x 4mm|
 |3| Screw M3 pan x  6mm|
 |3| Washer  M3 x 7mm x 0.5mm|
 

examples/EnviroPlus/scad/fan_controller.scad

@@ -7,7 +7,6 @@
 //
 // Top level model
 //
-
 include <NopSCADlib/core.scad>
 use <NopSCADlib/vitamins/veroboard.scad>
 include <NopSCADlib/vitamins/smds.scad>
@@ -19,10 +18,9 @@ fan_vb = vero("fan_vb", "fan_controller", 6, 6, breaks = [[2, 1], [2 + eps, 5]],
         [0, 1,     0, "link", 0, 4, undef, 2.5],
         [0, 0,     0, "link", 0, 4, undef, 2.5],
         [2, 5,     0, "-smd_res", RES0805, "3K3"],
-        [4, 4.7,  90, "-smd_cap", CAP1206, 1.2, "10uF"],
+        [4, 4.5,  90, "-smd_cap", CAP1206, 1.2, "10uF"],
         [2, 2.5, 180, "-smd_sot", SOT223, "FZT851"],
-    ],
-    joints = [[5, 1], [5, 5], [0, [0, 1, 5]]]
+    ]
  );
 
 //! The fan controller is a single transistor wired as a Miller integrator that effectively multiplies the capacitor value by the gain of the transistor.
@@ -40,6 +38,6 @@ fan_vb = vero("fan_vb", "fan_controller", 6, 6, breaks = [[2, 1], [2 + eps, 5]],
 //!
 //! ![SMT](docs/smt.jpg)
 //!
-module fan_controller_assembly() rotate(90) vflip(!exploded()) veroboard_assembly(fan_vb, -vero_thickness(fan_vb) - 1.4, 0);
+module fan_controller_assembly() rotate(90) vflip() veroboard_fastened_assembly(fan_vb, -vero_thickness(fan_vb) - 1.4, 0);
 
 fan_controller_assembly();

examples/EnviroPlus/scad/main.scad

@@ -25,6 +25,7 @@ include <NopSCADlib/vitamins/fans.scad>
 use <NopSCADlib/vitamins/insert.scad>
 use <NopSCADlib/vitamins/veroboard.scad>
 use <NopSCADlib/utils/round.scad>
+use <NopSCADlib/utils/pcb_utils.scad>
 use <NopSCADlib/printed/foot.scad>
 use <NopSCADlib/printed/printed_box.scad>
 use <fan_controller.scad>
@@ -402,7 +403,7 @@ assembly("enviro") {
     if(!exploded())
         for(x = [8, 7, 3])
             pcb_grid(pcb, x, 0, 0.05)
-                solder_meniscus(pcb, 0.39, 1);
+                solder_meniscus(0.39, 1);
 }
 
 //! * Screw the Enviro+ PCB to the front of the case using M2.5 x 8mm pan screws with washer and nuts on the inside.

examples/MainsBreakOutBox/bom/base_assembly.txt

@@ -1,6 +1,6 @@
 base_assembly:
 Vitamins:
-  2 Heatfit insert M3
+  2 Heatfit insert M3 x 5.8mm
 
 Printed:
   1 socket_box.stl

examples/MainsBreakOutBox/bom/bom.csv

@@ -3,7 +3,7 @@
 'Wire brown 30/0.25mm strands, length 150mm - not shown',  2
 'Wire green & yellow 30/0.25mm strands, length 150mm - not shown',  2
 'IEC inlet for ATX',  1
-'Heatfit insert M3',  2
+'Heatfit insert M3 x 5.8mm',  2
 '4mm shielded jack socket blue',  2
 '4mm shielded jack socket brown',  1
 '4mm shielded jack socket green',  2

examples/MainsBreakOutBox/bom/bom.json

@@ -7,7 +7,7 @@
         "count": 1,
         "assemblies": {},
         "vitamins": {
-            "insert(F1BM3): Heatfit insert M3": {
+            "insert(F1BM3): Heatfit insert M3 x 5.8mm": {
                 "count": 2
             }
         },

examples/MainsBreakOutBox/bom/bom.txt

@@ -12,7 +12,7 @@ Vitamins:
   |  |  | 2|  2 Wire brown 30/0.25mm strands, length 150mm - not shown
   |  | 1| 1|  2 Wire green & yellow 30/0.25mm strands, length 150mm - not shown
   |  |  | 1|  1 IEC inlet for ATX
- 2|  |  |  |  2 Heatfit insert M3
+ 2|  |  |  |  2 Heatfit insert M3 x 5.8mm
   |  | 2|  |  2 4mm shielded jack socket blue
   |  | 1|  |  1 4mm shielded jack socket brown
   |  | 2|  |  2 4mm shielded jack socket green

examples/MainsBreakOutBox/readme.md

@@ -38,7 +38,7 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 |   .  |   .  |   .  |   1  |    1  |    4mm shielded jack socket brown |
 |   .  |   .  |   .  |   2  |    2  |    4mm shielded jack socket green |
 |   .  |   .  |   .  |   3  |    3  |    Ferrule for 1.5mm^2 wire - not shown |
-|   2  |   .  |   .  |   .  |    2  |    Heatfit insert M3 |
+|   2  |   .  |   .  |   .  |    2  |    Heatfit insert M3 x 5.8mm |
 |   .  |   .  |   3  |   5  |    8  |    Heatshrink sleeving ID 3.2mm x 15mm - not shown |
 |   .  |   .  |   1  |   .  |    1  |    IEC inlet for ATX |
 |   .  |   .  |   .  |   1  |    1  |    Mains socket 13A |
@@ -65,7 +65,7 @@ Earth leakage can be measured Canadian CSA style by disconnected the neutral lin
 ### Vitamins
 |Qty|Description|
 |---:|:----------|
-|2| Heatfit insert M3|
+|2| Heatfit insert M3 x 5.8mm|
 
 
 ### 3D Printed parts

examples/PT_camera/PT_camera.scad

@@ -0,0 +1,54 @@
+include <../../vitamins/geared_steppers.scad>
+include <../../core.scad>
+include <../../vitamins/cameras.scad>
+use <../../vitamins/pcb.scad>
+
+module ptc(ang2) {
+  rotate([180,0,0])
+    union(){
+      geared_stepper(28BYJ_48,ang2);
+      rotate([90,0,180-ang2])
+        translate([9.8,-16.5,1.7])
+          rotate([0,0,90])
+            camera(cameras[0]);
+    }
+}
+
+module pt(ang,ang2) {
+  rotate([180,0,0]) geared_stepper(28BYJ_48,ang);
+  rotate([0,0,ang]) rotate([270,0,0]) translate([0,-29.0,-1.5]) ptc(ang2);
+}
+
+deg=90;
+c=90;
+
+if($t<0.125){
+  a=180+$t/0.125*deg;
+  pt(a,c);
+}else if ($t<0.25){
+  a=180+deg-($t-0.125)/0.125*deg;
+  pt(a,c);
+}else if ($t<0.375){
+  b=c+($t-0.25)/0.125*deg;
+  pt(180,b);
+}else if ($t<0.5){
+  b=c+deg-($t-0.375)/0.125*deg;
+  pt(180,b);
+}   
+else if($t<0.625){
+  a=180+($t-0.5)/0.125*deg;
+  b=c+deg-90+($t-0.5)/0.125*deg;
+  pt(a,b);
+}else if ($t<0.75){
+  a=180+deg-($t-0.625)/0.125*deg;
+  b=c+deg-($t-0.625)/0.125*deg;
+  pt(a,b);
+}else if ($t<0.875){
+  a=180-($t-0.75)/0.125*deg;
+  b=c-($t-0.75)/0.125*deg;
+  pt(a,b);
+}else{
+  a=90+($t-0.875)/0.125*deg;
+  b=c+deg-180+($t-0.875)/0.125*deg;
+  pt(a,b);
+}   

gallery/readme.md

@@ -4,6 +4,18 @@ Arduino thermostat to control a beer fridge to use it as an environmental chambe
 
 ![](ArduinoThermostat.png)
 
+## Blinder
+
+Tasmota roller blind open / close mechanism
+
+
+![](Blinder.png)
+
+## ClockSetter
+An IOT device for programming UK wireless clocks that are out of reach of the UK MSF time signal but are on UK time, e.g. in Tenerife.
+
+![](ClockSetter.png)
+
 ## EnviroPlus
 Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
 
@@ -19,7 +31,6 @@ Current state of HydraRaptor after being modified for laser engraving.
 
 ![](HydraBot.png)
 
-
 ## IOT 50V PSU
 WiFi controllable PSU
 
@@ -30,6 +41,11 @@ WiFi controllable programmable load
 
 ![](IOT_LOAD.png)
 
+## LED Box
+Indicator LEDs used to debug a Bosch diswasher problem.
+
+![](LED_box.png)
+
 ## Lab ATX PSU
 Bench power supply built around an ATX PSU.
 
@@ -70,16 +86,40 @@ Mains isolated and variable supply with metering.
 
 
 
+## MultiSwitch
+Multi Tasmota switch to replace 5 Sonoffs
+
+![](MultiSwitch.png)
+
+## MultiSwitch2
+Multi Tasmota switch to replace 5 Sonoffs
+
+![](MultiSwitch2.png)
+
 ## PSU Cover
 A base and shroud to make PSU safe to sit on a desk
 
 ![](PSU_cover.png)
 
+## PSU Tube
+12V power supply made in an aluminium tube for fire safety
+
+![](PSU_tube.png)
+
+## PT_camera
+Two 28BYJ_48 geared stepper motors and a Raspberry v1 camera, combined with [4 drops of superglue](https://forums.raspberrypi.com/viewtopic.php?p=1810000#p1810000). Script [PT_camera.scad](../examples/PT_camera/PT_camera.scad) nicely demonstrates new 2nd optional arg (motor shaft angle) of ```geared_stepper()```.  
+![](PT_camera.anim.gif)
+
 ## PotBox
 Potentiometer box with course and fine controls and three 4mm binding posts
 
 ![](PotBox.png)
 
+## PowerBank
+LION powerbank with e-paper charge status display
+
+![](PowerBank.png)
+
 ## SunBot
 A solar tracker to keep a solar panel pointing at the sun.
 

global_defs.scad

@@ -41,16 +41,23 @@ pp1_colour      = is_undef($pp1_colour)      ? rr_green     : $pp1_colour;// pri
 pp2_colour      = is_undef($pp2_colour)      ? crimson      : $pp2_colour;// printed part colour 2
 pp3_colour      = is_undef($pp3_colour)      ? "SteelBlue"  : $pp3_colour;// printed part colour 3
 pp4_colour      = is_undef($pp4_colour)      ? "darkorange" : $pp4_colour;// printed part colour 4
-
+manifold        = is_undef($manifold)        ? false  : $manifold;        // Manifold library being used instead of cgal
 
 // Minimum wall is about two filaments wide but we extrude it closer to get better bonding
 squeezed_wall = $preview ? 2 * extrusion_width - layer_height * (1 - PI / 4)
                          : extrusion_width - layer_height / 2 + nozzle / 2 + extrusion_width / 2;
 
-inf = 1e10;      // very big
+inf = 1e10;       // very big
+big = manifold ? 1e3 : inf;     // Not too big for manifold
 eps = 1/128;     // small fudge factor to stop CSG barfing on coincident faces.
-$fa = 6;
-$fs = extrusion_width / 2;
+
+fa = is_undef($vitamin_fa) ? 6    : $vitamin_fa;          // Used for drawing vitamins, rather than printing.
+fs = is_undef($vitamin_fs) ? 0.25 : $vitamin_fs;
+fn = 32;
+
+$fa = $fa == 12 ? 6 : $fa;          // Defaults for printing
+$fs = $fs == 2 ? extrusion_width / 2 : $fs;
+
 
 // Some additional named colours
 silver           = [0.75, 0.75, 0.75];

lib.scad

@@ -25,18 +25,20 @@ include <core.scad>
 include <vitamins/psus.scad>
 include <vitamins/pcbs.scad>
 
+include <vitamins/antennas.scad>
 include <vitamins/batteries.scad>
 include <vitamins/bearing_blocks.scad>
 include <vitamins/blowers.scad>
 include <vitamins/bldc_motors.scad>
 include <vitamins/box_sections.scad>
 include <vitamins/bulldogs.scad>
-include <vitamins/buttons.scad>
 include <vitamins/cameras.scad>
 include <vitamins/components.scad>
 include <vitamins/displays.scad>
 include <vitamins/extrusions.scad>
 include <vitamins/extrusion_brackets.scad>
+include <vitamins/fastons.scad>
+include <vitamins/gear_motors.scad>
 include <vitamins/geared_steppers.scad>
 include <vitamins/hot_ends.scad>
 include <vitamins/inserts.scad>
@@ -48,6 +50,7 @@ include <vitamins/magnets.scad>
 include <vitamins/mains_sockets.scad>
 include <vitamins/modules.scad>
 include <vitamins/panel_meters.scad>
+include <vitamins/photo_interrupters.scad>
 include <vitamins/pillars.scad>
 include <vitamins/pillow_blocks.scad>
 include <vitamins/pin_headers.scad>
@@ -55,6 +58,7 @@ include <vitamins/pulleys.scad>
 include <vitamins/ring_terminals.scad>
 include <vitamins/rails.scad>
 include <vitamins/rod.scad>
+include <vitamins/rod_ends.scad>
 include <vitamins/servo_motors.scad>
 include <vitamins/shaft_couplings.scad>
 include <vitamins/sheets.scad>
@@ -94,8 +98,11 @@ use <utils/hanging_hole.scad>
 use <utils/fillet.scad>
 use <utils/rounded_polygon.scad>
 use <utils/rounded_triangle.scad>
+use <utils/splines.scad>
 use <utils/layout.scad>
 use <utils/round.scad>
 use <utils/offset.scad>
+use <utils/pcb_utils.scad>
 use <utils/sector.scad>
 use <utils/thread.scad>
+use <vitamins/photo_interrupter.scad>

libtest.scad

@@ -42,6 +42,7 @@
 include <lib.scad>
 
 use <tests/7_segments.scad>
+use <tests/antennas.scad>
 use <tests/ball_bearings.scad>
 use <tests/batteries.scad>
 use <tests/bearing_blocks.scad>
@@ -63,7 +64,9 @@ use <tests/drag_chain.scad>
 use <tests/extrusions.scad>
 use <tests/extrusion_brackets.scad>
 use <tests/fans.scad>
+use <tests/fastons.scad>
 use <tests/fuseholder.scad>
+use <tests/gear_motors.scad>
 use <tests/geared_steppers.scad>
 use <tests/hot_ends.scad>
 use <tests/IECs.scad>
@@ -84,6 +87,7 @@ use <tests/o_ring.scad>
 use <tests/opengrab.scad>
 use <tests/panel_meters.scad>
 use <tests/PCBs.scad>
+use <tests/photo_interrupters.scad>
 use <tests/pillars.scad>
 use <tests/pillow_blocks.scad>
 use <tests/potentiometers.scad>
@@ -94,6 +98,8 @@ use <tests/rails.scad>
 use <tests/ring_terminals.scad>
 use <tests/rockers.scad>
 use <tests/rod.scad>
+use <tests/rod_ends.scad>
+use <tests/SBR_rails.scad>
 use <tests/screws.scad>
 use <tests/sealing_strip.scad>
 use <tests/servo_motors.scad>
@@ -107,6 +113,7 @@ use <tests/stepper_motors.scad>
 use <tests/Swiss_clips.scad>
 use <tests/toggles.scad>
 use <tests/transformers.scad>
+use <tests/ttracks.scad>
 use <tests/tubings.scad>
 use <tests/veroboard.scad>
 use <tests/washers.scad>
@@ -142,7 +149,7 @@ x1 = x0 + 110;
 x2 = x1 + 90;
 x3 = x2 + 130;
 x4 = x3 + 200;
-x5 = 850;
+x5 = 900;
 x6 = x5 + 150;
 
 cable_grommets_y = 0;
@@ -172,7 +179,7 @@ translate([x5, screw_knobs_y])
     screw_knobs();
 
 knobs_y = screw_knobs_y + 40;
-translate([640, knobs_y])
+translate([660, knobs_y])
     printed_pulley_test();
 
 translate([x5, knobs_y])
@@ -215,15 +222,12 @@ translate([950, box_y])
     box_test();
 
 
-translate([950, 1400])
-    rotate(-90)
-        bbox_test();
-
 inserts_y = 0;
 nuts_y = inserts_y + 20;
-washers_y = nuts_y + 120;
+washers_y = nuts_y + 160;
 screws_y = washers_y + 120;
-circlips_y = screws_y + 160;
+threaded_inserts_y = screws_y + 180;
+circlips_y = threaded_inserts_y + 30;
 springs_y = circlips_y + 20;
 o_rings_y = springs_y;
 sealing_strip_y = springs_y + 20;
@@ -231,16 +235,20 @@ tubings_y = sealing_strip_y + 20;
 pillars_y = tubings_y + 20;
 ball_bearings_y = pillars_y + 40;
 pulleys_y = ball_bearings_y + 40;
-leadnuts_y = pulleys_y + 60;
-linear_bearings_y = leadnuts_y + 50;
+leadnuts_y = pulleys_y + 35;
+linear_bearings_y = leadnuts_y + 65;
 steppers_y = linear_bearings_y + 110;
 sheets_y = steppers_y + 55;
 pcbs_y = sheets_y + 60;
-displays_y = pcbs_y + 140;
+displays_y = pcbs_y + 265;
 fans_y = displays_y + 110;
 transformers_y = fans_y + 120;
 psus_y = transformers_y + 190;
 
+ttracks_y = pcbs_y + 150;
+translate([840, ttracks_y])
+    ttracks();
+
 translate([x0 + 35, inserts_y])
     inserts();
 
@@ -253,6 +261,9 @@ translate([x0, nuts_y])
 translate([x0, washers_y])
     washers();
 
+translate([x0, threaded_inserts_y])
+    threaded_inserts();
+
 translate([x0, screws_y])
     screws();
 
@@ -283,17 +294,25 @@ translate([x0, pulleys_y])
 translate([x0, leadnuts_y])
     leadnuts();
 
+translate([x0 + 170, leadnuts_y])
+    rod_ends();
+
 translate([x0 + 120, leadnuts_y])
     leadnuthousings();
 
 translate([x0, linear_bearings_y]) {
-    linear_bearings();
+    translate([0, -30])
+        linear_bearings();
+
     rods();
 }
 
 translate([x0, steppers_y])
     stepper_motors();
 
+translate([x0 + 450, steppers_y])
+    gear_motors();
+
 translate([x0, sheets_y])
     sheets();
 
@@ -336,9 +355,10 @@ leds_y = 0;
 carriers_y = leds_y + 40;
 magnets_y = carriers_y + 40;
 spades_y = magnets_y + 20;
-buttons_y = spades_y + 20;
-jacks_y = buttons_y + 40;
-microswitches_y = jacks_y + 40;
+fastons_y = spades_y + 20;
+buttons_y = fastons_y + 20;
+jacks_y = buttons_y + 30;
+microswitches_y = jacks_y + 30;
 rockers_y = microswitches_y + 40;
 toggles_y = rockers_y + 60;
 components_y = toggles_y + 40;
@@ -364,6 +384,9 @@ translate([x2 + 70, leds_y])
 translate([x2, spades_y])
     spades();
 
+translate([x2, fastons_y])
+    fastons();
+
 translate([x2,  buttons_y])
     buttons();
 
@@ -383,34 +406,34 @@ translate([x2, components_y])
     components();
 
 veroboard_y = 0;
-d_connectors_y = veroboard_y + 110;
-iecs_y = d_connectors_y + 80;
+d_connectors_y = veroboard_y + 120;
+iecs_y = d_connectors_y + 70;
 modules_y = iecs_y + 60;
 ssrs_y = modules_y + 80;
 blowers_y = ssrs_y + 60;
 hot_ends_y = blowers_y + 100;
 batteries_y = hot_ends_y + 55;
 panel_meters_y = batteries_y + 70;
-extrusions_y = panel_meters_y + 80;
+extrusions_y = panel_meters_y + 130;
 
 translate([x3, veroboard_y])
     veroboard_test();
 
-translate([x3 + 60, veroboard_y + 20])
+translate([x3 + 50, veroboard_y + 20])
     geared_steppers();
 
 translate([x3 + 160, ssrs_y])
     pcb_mounts();
 
-translate([x3 + 170, veroboard_y + 16])
+translate([x3 + 145, veroboard_y])
     cameras();
 
+translate([x3 + 145, veroboard_y + 45])
+    camera_housings();
+
 translate([x3, d_connectors_y])
     d_connectors();
 
-translate([x3 + 170, d_connectors_y - 10])
-    camera_housings();
-
 translate([x3, iecs_y])
     iecs();
 
@@ -423,6 +446,9 @@ translate([x3 + 60, modules_y])
 translate([x3 + 90, modules_y])
     modules();
 
+translate([x3 + 150, modules_y])
+    photo_interrupters();
+
 translate([x3, ssrs_y]) {
     ssrs();
 
@@ -444,28 +470,31 @@ translate([x2, panel_meters_y])
 translate([x2, extrusions_y])
     extrusions();
 
-translate([400, transformers_y])
+translate([370, transformers_y])
     transformers();
 
-translate([x4 + 50, transformers_y])
+translate([x4, transformers_y])
     no_explode() socket_boxes();
 
+translate([950, transformers_y + 110])
+    rotate(-90)
+        bbox_test();
 
 belts_y = 0;
 rails_y = belts_y + 200;
 extrusion_brackets_y = rails_y + 250;
 sk_brackets_y = extrusion_brackets_y + 80;
 kp_pillow_blocks_y = sk_brackets_y + 60;
-scs_bearing_blocks_y = kp_pillow_blocks_y + 60;
+bearing_blocks_y = kp_pillow_blocks_y + 60;
 box_sections_y = batteries_y;
-BLDC_y = scs_bearing_blocks_y + 120;
-pot_y = BLDC_y + 40;
-cable_strip_y = pot_y + 50;
+BLDC_y = bearing_blocks_y + 180;
+pot_y = bearing_blocks_y;
+cable_strip_y = sheets_y + 30;
 
 translate([0, transformers_y])
     servo_motors();
 
-translate([x4 + 200, belts_y + 58]) {
+translate([x4 + 200 + 16, belts_y + 58]) {
     belt_test();
 
     translate([0, 60])
@@ -475,12 +504,19 @@ translate([x4 + 200, belts_y + 58]) {
 translate([x4 + 175, belts_y, -20])
     drag_chains();
 
-translate([x4, rails_y + 130])
+translate([x4, rails_y + 130]) {
     rails();
 
+    translate([305, 0])
+        sbr_rails();
+}
+
 translate([x4, cable_strip_y])
     cable_strips();
 
+translate([x4 + 150, cable_strip_y])
+    antennas();
+
 translate([x4, kp_pillow_blocks_y])
     kp_pillow_blocks();
 
@@ -493,8 +529,8 @@ translate([x4, extrusion_brackets_y])
 translate([x1, swiss_clips_y + 50])
     shaft_couplings();
 
-translate([x4, scs_bearing_blocks_y])
-    scs_bearing_blocks();
+translate([x4, bearing_blocks_y])
+    bearing_blocks();
 
 translate([x4, BLDC_y])
     bldc_motors();

printed/box.scad

@@ -452,9 +452,10 @@ module box_screw_hole_positions(type) {
             children();
 }
 
-module box_base_blank(type) { //! Generates a 2D template for the base sheet
+module box_base_blank(type, sheet = false) { //! Generates a 2D template for the base sheet, `sheet` can be set to override the type
+    s = sheet ? sheet : box_base_sheet(type);
     difference() {
-        sheet_2D(box_base_sheet(type), box_width(type), box_depth(type), box_sheet_r(type));
+        sheet_2D(s, box_width(type), box_depth(type), box_sheet_r(type));
 
         box_screw_hole_positions(type)
             drill(screw_clearance_radius(box_screw(type)), 0);
@@ -474,30 +475,44 @@ function subst_sheet(type, sheet) =
     let(s = box_sheets(type))
         sheet ? assert(sheet_thickness(sheet) == sheet_thickness(s)) sheet : s;
 
-module box_shelf_blank(type, sheet = false) { //! Generates a 2D template for a shelf sheet
+module box_shelf_blank(type, sheet = false, wall = undef) { //! Generates a 2D template for a shelf sheet
     difference() {
         sheet_2D(subst_sheet(type, sheet), box_width(type) - bezel_clearance, box_depth(type) - bezel_clearance, 1);
 
         offset(bezel_clearance / 2)
             box_corner_quadrants(type, box_width(type), box_depth(type));
+
+        box_shelf_screw_positions(type, [], 0, wall)
+            drill(screw_clearance_radius(box_shelf_screw(type)), 0);
     }
 }
 
-module box_shelf_screw_positions(type, screw_positions, thickness = 0, wall = undef) { //! Place children at the shelf screw positions
+module box_shelf_screw_positions(type, screw_positions, thickness = 0, wall = undef, top_screws = true) { //! Place children at the shelf screw positions
     w = is_undef(wall) ? box_wall(type) : wall;
     insert = box_shelf_insert(type);
     translate_z(-insert_boss_radius(insert, w))
         for(p = screw_positions)
             multmatrix(p)
                 translate_z(thickness)
-                    children();
+                    let($horizontal = true)
+                        children();
+
+    r = box_boss_r(type);
+    inset = box_intrusion(type) - r + (r + insert_boss_radius(insert, w) + bezel_clearance / 2) / sqrt(2);
+    if(top_screws)
+        translate_z(thickness)
+            for(x = [-1, 1], y = [-1, 1])
+                translate([x * (box_width(type) / 2 - inset), y * (box_depth(type) / 2 - inset)])
+                    rotate(45 * x * (2 + y))
+                        let($horizontal = false)
+                            children();
 }
 
-module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a shelf bracket, the first optional child is a 2D cutout and the second 3D cutouts
+module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a shelf bracket, the first optional child is a 2D cutout and the second 3D cutouts, third child is 3D additions.
     w = is_undef(wall) ? box_wall(type) : wall;
     insert = box_shelf_insert(type);
     lip = 2 * insert_boss_radius(insert, w);
-    width = insert_length(insert) + w;
+    width = max(insert_length(insert) + w, lip);
 
     module shape()
         difference() {
@@ -548,9 +563,13 @@ module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a
                                     children(0);
                     }
 
-                hflip()
+                hflip() {
                     box_shelf_screw_positions(type, screw_positions, 0, w)
                         boss();
+
+                    if($children > 2)
+                        children(2);
+                }
             }
             if($children > 1)
                 hflip()
@@ -558,7 +577,7 @@ module box_shelf_bracket(type, screw_positions, wall = undef) { //! Generates a
 
             hflip()
                 box_shelf_screw_positions(type, screw_positions, 0, w)
-                    insert_hole(insert, counterbore = 1, horizontal = true);
+                    insert_hole(insert, counterbore = 1, horizontal = $horizontal);
         }
 }
 

printed/butt_box.scad

@@ -51,9 +51,10 @@ function bbox_name(type)       = type[8]; //! Optional name if there is more tha
 function bbox_skip_blocks(type)= type[9]; //! List of fixing blocks to skip, used to allow a hinged panel for example
 function bbox_star_washers(type)= type[10];//! Set to false to remove star washers.
 function bbox_thin_blocks(type) = type[11];//! Set for 2 screw blocks instead of three hole fixing blocks.
+function bbox_short_inserts(type)= type[12];//! Set to use short inserts in the blocks
 
-function bbox(screw, sheets, base_sheet, top_sheet, span, size, name = "bbox", skip_blocks = [], star_washers = true, thin_blocks = false) = //! Construct the property list for a butt_box
- [ screw, sheets, base_sheet, top_sheet, span, size.x, size.y, size.z, name, skip_blocks, star_washers, thin_blocks ];
+function bbox(screw, sheets, base_sheet, top_sheet, span, size, name = "bbox", skip_blocks = [], star_washers = true, thin_blocks = false, short_inserts = false) = //! Construct the property list for a butt_box
+ [ screw, sheets, base_sheet, top_sheet, span, size.x, size.y, size.z, name, skip_blocks, star_washers, thin_blocks, short_inserts ];
 
 function bbox_volume(type) = bbox_width(type) * bbox_depth(type) * bbox_height(type) / 1000000; //! Internal volume in litres
 function bbox_area(type) = let(w =  bbox_width(type), d = bbox_depth(type), h = bbox_height(type)) //! Internal surface area in m^2
@@ -78,7 +79,8 @@ function corner_block_positions(type) = let(
           rotate([z > 0 ? 180 : 0, 0, corner * 90 + (z > 0 ? 90 : 0)])
     ];
 
-function corner_holes(type) = [for(p = corner_block_positions(type), q = corner_block_holes(bbox_screw(type))) p * q];
+function corner_holes(type) = let(short = bbox_short_inserts(type))
+    [for(p = corner_block_positions(type), q = corner_block_holes(bbox_screw(type), short_insert = short)) p * q];
 
 function fixing_block_positions(type) = let(
         width = bbox_width(type),
@@ -112,7 +114,8 @@ function fixing_block_positions(type) = let(
 
 function side_holes(type) = let(
     screw = bbox_screw(type),
-    holes = bbox_thin_blocks(type) ? 2screw_block_holes(screw) : fixing_block_holes(screw))
+    short = bbox_short_inserts(type),
+    holes = bbox_thin_blocks(type) ? 2screw_block_holes(screw, short_insert = short) : fixing_block_holes(screw))
         [for(p = fixing_block_positions(type), q = holes) p * q];
 
 module bbox_drill_holes(type, t)
@@ -232,6 +235,7 @@ module _bbox_assembly(type, top = true, base = true, left = true, right = true,
     tt = sheet_thickness(bbox_top_sheet(type));
     star_washers = bbox_star_washers(type);
     thin_blocks = bbox_thin_blocks(type);
+    short = bbox_short_inserts(type);
 
     function is_missing_screw(p) = p.y > depth / 2 - 1 ? !back : false;
 
@@ -241,14 +245,14 @@ module _bbox_assembly(type, top = true, base = true, left = true, right = true,
             let(q = transform([0, 0, 0], p), thickness = q.z > 0 ? tt : bt)
                 multmatrix(p)
                     fastened_corner_block_assembly(is_missing_screw(q) && ((q.z > 0) != (q.x > 0)) ? 0 : t, bbox_screw(type), thickness,
-                                                   is_missing_screw(q) && ((q.z > 0) == (q.x > 0)) ? 0 : t, star_washers = star_washers);
+                                                   is_missing_screw(q) && ((q.z > 0) == (q.x > 0)) ? 0 : t, star_washers = star_washers, short_insert = short);
 
         h = height / 2 - 1;
         for(p = fixing_block_positions(type))
             let(q = transform([0, 0, 0], p), thickness = q.z > h ? tt : q.z < -h ? bt : t)
                 multmatrix(p)
                     if(thin_blocks)
-                        fastened_2screw_block_assembly(is_missing_screw(q) ? 0 : t, bbox_screw(type), thickness_below = thickness, star_washers = star_washers);
+                        fastened_2screw_block_assembly(is_missing_screw(q) ? 0 : t, bbox_screw(type), thickness_below = thickness, star_washers = star_washers, short_insert = short);
                     else
                         fastened_fixing_block_assembly(is_missing_screw(q) ? 0 : t, bbox_screw(type), thickness2 = thickness, star_washers = star_washers);
 

printed/cable_clip.scad

@@ -18,100 +18,137 @@
 //
 
 //
-//! Cable clips to order. Can be for one or two cables of different sizes.
+//! Cable clips to order. Can be for one or two cables of different sizes. Can use an insert and a screw from below or a screw and nut, nyloc or plain, either way up.
 //
 include <../core.scad>
 use <../vitamins/wire.scad>
 use <../utils/fillet.scad>
+use <../vitamins/insert.scad>
 
 wall = 2;
 
-function cable_clip_width(screw) = max(wall + 2 * screw_clearance_radius(screw) + wall, washer_diameter(screw_washer(screw))); //! Width given the `screw`.
-function cable_clip_height(cable) = cable_height(cable) + wall; //! Height given the `cable`.
-function cable_clip_extent(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) + wall; //! How far it extends from the screw.
-function cable_clip_offset(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) / 2; //! The offset of the cable from the screw
+function cable_clip_insert(screw, insert = true) = //! Insert type for clip, given screw.
+    is_list(insert) ? insert : insert ? screw_insert(screw, true) : false;
 
-module single_cable_clip(screw, cable, h = 0) {
-    screw_dia = 2 * screw_clearance_radius(screw);
-    height = cable_clip_width(screw);
-    depth = h ? h : cable_height(cable) + wall;
+function cable_clip_width(screw, insert = false, nut = false) = //! Width given the `screw` and possibly insert or nut.
+    let(insert = cable_clip_insert(screw, insert))
+        insert ? 2 * (insert_hole_radius(insert) + wall) :
+            nut ? 2 * (nut_radius(screw_nut(screw)) + wall) :
+                max(wall + 2 * screw_clearance_radius(screw) + wall, washer_diameter(screw_washer(screw)));
+
+function cable_clip_height(cable, screw = false, insert = false, nut = false) = //! Height given the `cable`.
+    let(insert = cable_clip_insert(screw, insert))
+        max(cable_height(cable) + wall, insert ? insert_hole_length(insert) + 1 : 0, nut ? nut_trap_depth(screw_nut(screw)) + wall : 0);
+
+function cable_clip_extent(screw, cable, insert = false, nut = false) = cable_clip_width(screw, insert, nut) / 2 + cable_width(cable) + wall; //! How far it extends from the screw.
+function cable_clip_offset(screw, cable, insert = false, nut = false) = cable_clip_width(screw, insert, nut) / 2 + cable_width(cable) / 2; //! The offset of the cable from the screw.
+
+module single_cable_clip(screw, cable, h = 0, insert = false, nut = false) {
+    insert = cable_clip_insert(screw, insert);
+    height = cable_clip_width(screw, insert, nut);
+    depth = h ? h : cable_clip_height(cable, screw, insert, nut);
     w = cable_width(cable);
-    width = wall + w + wall + screw_dia + wall;
-    hole_x = wall + w + wall + screw_dia / 2;
+    width = wall + w + height;
+    hole_x = wall + w + height / 2;
     rad = min(wall + cable_wire_size(cable) / 2, depth / 2);
     r = extrusion_width - eps;
-    translate([-hole_x, 0]) difference() {
-        linear_extrude(height)
-            difference() {
-                hull() {
-                    rounded_square([width, 1], r, center = false);
-
-                    translate([width - 1, 0])
-                        rounded_square([1, depth], r, center = false);
-
-                    translate([rad, depth - rad])
-                        circle(r = rad);
-                }
-
-                translate([wall + cable_width(cable) / 2, 0]) {
+    the_nut = screw_nut(screw);
+    translate([-hole_x, 0])
+        difference() {
+            linear_extrude(height)
+                difference() {
                     hull() {
-                        for(p = cable_bundle_positions(cable))
-                            translate(p)
-                                circle(d = cable_wire_size(cable));
+                        rounded_square([width, 1], r, center = false);
 
-                        square([w, eps], center = true);
+                        translate([width - 1, 0])
+                            rounded_square([1, depth], r, center = false);
+
+                        translate([rad, depth - rad])
+                            circle(r = rad);
+                    }
+
+                    translate([wall + cable_width(cable) / 2, 0]) {
+                        hull() {
+                            for(p = cable_bundle_positions(cable))
+                                translate(p)
+                                    circle(d = cable_wire_size(cable));
+
+                            square([w, eps], center = true);
+                        }
+                        for(side = [-1, 1])
+                            translate([side * w / 2, 0])
+                                hflip(side < 0)
+                                    fillet(r = r, h = 0);
                     }
-                    for(side = [-1, 1])
-                        translate([side * w / 2, 0])
-                            hflip(side < 0)
-                                fillet(r = r, h = 0);
                 }
-            }
 
-        translate([hole_x, depth / 2, height / 2])
-            rotate([90,0,0])
-                teardrop_plus(h = depth + 1, r = screw_dia / 2, center = true);
-    }
+            translate([hole_x, depth, height / 2])
+                rotate([90, 0, 0])
+                    if(insert)
+                        insert_hole(insert, 10, horizontal = true);
+                    else
+                        if(nut) {
+                            translate_z(depth - wall - nut_trap_depth(the_nut))
+                                nut_trap(screw, the_nut, horizontal = true);
+                            nut_trap(screw, the_nut, horizontal = true);
+                        }
+                        else
+                            teardrop_plus(h = 2 * depth + 1, r = screw_clearance_radius(screw), center = true);
+        }
 }
 
 
-module double_cable_clip(screw, cable1, cable2) {
-    h = max(cable_clip_height(cable1), cable_clip_height(cable2));
+module double_cable_clip(screw, cable1, cable2, insert = false, nut = false) {
+    h = max(cable_clip_height(cable1, screw, insert, nut), cable_clip_height(cable2, screw, insert, nut));
     union() {
-        single_cable_clip(screw, cable1, h);
+        single_cable_clip(screw, cable1, h, insert, nut);
 
-        mirror([1,0,0]) single_cable_clip(screw, cable2, h);
+        mirror([1,0,0]) single_cable_clip(screw, cable2, h, insert, nut);
     }
 }
 
-module cable_clip(screw, cable1, cable2 = 0) { //! Create the STL for a single cable or two cable clip
-    function clip_str(screw) = str("cable_clip_", screw_radius(screw) * 20);
+module cable_clip(screw, cable1, cable2 = 0, insert = false, nut = false) { //! Create the STL for a single cable or two cable clip
+    function clip_str(screw) = str("cable_clip_", screw_radius(screw) * 20, insert ? "I" : nut ? "N" : "");
     function cable_str(cable) = str("_", cable_wires(cable), "_", round(cable_wire_size(cable) * 10));
-
-    if(cable2) {
-        stl(str(clip_str(screw), cable_str(cable1), cable_str(cable2)));
-
-        double_cable_clip(screw, cable1, cable2);
-    }
-    else {
-        stl(str(clip_str(screw), cable_str(cable1)));
-
-        single_cable_clip(screw, cable1);
-    }
+    assert(!(insert && nut), "insert and nut mutually exclusive");
+    if(cable2)
+        stl(str(clip_str(screw), cable_str(cable1), cable_str(cable2)))
+            double_cable_clip(screw, cable1, cable2, insert, nut);
+    else
+        stl(str(clip_str(screw), cable_str(cable1)))
+            single_cable_clip(screw, cable1, h = 0, insert = insert, nut = nut);
 }
 
-
-module cable_clip_assembly(screw, thickness, cable1, cable2 = 0) { //! Cable clip with the fasteners
-    height = max(cable_clip_height(cable1), cable2 ? cable_clip_height(cable2) : 0);
+module cable_clip_assembly(screw, thickness, cable1, cable2 = 0, flip = false, insert = false, nut = false, nyloc = true) { //! Cable clip with the fasteners
+    flip = flip || insert || nut;          // Screw must be below if using an insert or nut
+    insert = cable_clip_insert(screw, insert);
+    height = max(cable_clip_height(cable1, screw, insert, nut), cable2 ? cable_clip_height(cable2, screw, insert, nut) : 0);
 
     stl_colour(pp1_colour) render()
-        translate([0, cable_clip_width(screw) / 2]) rotate([90, 0, 0])
-            cable_clip(screw, cable1, cable2);
+        translate([0, cable_clip_width(screw, insert, nut) / 2])
+            rotate([90, 0, 0])
+                cable_clip(screw, cable1, cable2, insert, nut);
 
+    the_nut = screw_nut(screw);
+    screw_len = nut ? screw_length(screw, thickness + wall,   nyloc ? 1 : 2, nyloc = nyloc, nut = !nyloc)
+                    : screw_length(screw, thickness + height, 2, nut = !nyloc && !insert, nyloc = !insert && nyloc, insert = insert);
     translate_z(height)
-        screw_and_washer(screw, screw_length(screw, height + thickness, 2, nyloc = true));
+        if(flip)
+            if(insert)
+                insert(insert);
+            else
+                if(nut)
+                    translate_z(-height + wall)
+                        nut(the_nut, nyloc);
+                else
+                    nut_and_washer(the_nut, nyloc);
+        else
+            screw_and_washer(screw, screw_len);
 
     translate_z(-thickness)
         vflip()
-            nut_and_washer(screw_nut(screw), true);
+            if(flip)
+                screw_and_washer(screw, screw_len, insert || !nyloc);
+            else
+                nut_and_washer(the_nut, nyloc);
 }

printed/camera_housing.scad

@@ -383,9 +383,3 @@ module camera_housing(cam) {
         rotate(90)
             camera_bracket(cam);
 }
-
-cam = rpi_camera_v2;
-if($preview)
-    camera_fastened_assembly(cam, 3);
-else
-    camera_housing(cam);

scripts/bom.py

@@ -104,14 +104,14 @@ class BOM:
 
     def add_part(self, s):
         args = []
-        match = re.match(r'^(.*?\.stl|.*?\.dxf)\((.*)\)$', s)                             #look for name.stl(...) or name.dxf(...)
+        match = re.match(r'^(.*?\.stl|.*?\.dxf|.*?\.svg)\((.*)\)$', s)                             #look for name.stl(...), name.dxf(...) or name.svg(...)
         if match:
             s = match.group(1)
             args = [match.group(2)]
         if s[-4:] == ".stl":
             parts = self.printed
         else:
-            if s[-4:] == ".dxf":
+            if s[-4:] == ".dxf" or s[-4:] == ".svg":
                 parts = self.routed
             else:
                 parts = self.vitamins
@@ -140,7 +140,7 @@ class BOM:
         for part in sorted(self.vitamins):
             i += 1
             if ': ' in part:
-                part_no, description = part.split(': ')
+                part_no, description = part.split(': ', 1)
             else:
                 part_no, description = "", part
             qty = self.vitamins[part].count
@@ -183,7 +183,7 @@ class BOM:
 
         for part in sorted(self.vitamins):
             if ': ' in part:
-                part_no, description = part.split(': ')
+                part_no, description = part.split(': ', 1)
             else:
                 part_no, description = "", part
             if breakdown:

scripts/changelog.py

@@ -80,9 +80,16 @@ def codify(word, url):
             return  '`' + word + '`'
     return word
 
+typos = [ # Typos that are ambiguous to codespell
+    ('cnc_bit+_r', 'cnc_bit_r'),
+    ('Udated',     'Updated'),
+    ('decription', 'description'),
+    ('Trainling',  'Trailing'),
+]
 
 def fixup_comment(comment, url):
-    comment = comment.replace('cnc_bit+_r', 'cnc_bit_r')
+    for typo in typos:
+        comment = comment.replace(typo[0], typo[1])
     """ markup code words and fix new paragraphs """
     result = ''
     word = ''
@@ -162,6 +169,9 @@ if __name__ == '__main__':
 
             # Print commits excluding merges
 
-            if not c.comment.startswith('Merge branch') and not c.comment.startswith('Merge pull') and not re.match(r'U..ated ch.*log.*', c.comment):
+            if not c.comment.startswith('Merge branch') \
+               and not c.comment.startswith('Merge pull') \
+               and not re.match(r'U.?.ated ch.*log.*', c.comment) \
+               and not re.match(r'Changelog updated.*', c.comment):
                 print('* %s [`%s`](%s "show commit") %s %s\n' % (c.date, c.hash[:7], url + '/commit/' + c.hash, initials(c.author), fixup_comment(c.comment, url)), file = file)
     do_cmd(('codespell -w -L od ' + filename).split())

scripts/deps.py

@@ -35,7 +35,7 @@ def read_deps(dname):
     for line in lines:
         if line.startswith('\t'):
             dep = line[1 : -1].rstrip(' \\').replace('\\ ', ' ')
-            if not os.path.basename(dep) in ['stl.scad', 'dxf.scad', 'svf.scad', 'png.scad', 'target.scad']:
+            if not os.path.basename(dep) in ['stl.scad', 'dxf.scad', 'svg.scad', 'png.scad', 'target.scad']:
                 deps.append(dep)
     return deps
 
@@ -63,5 +63,5 @@ def source_dirs(bom_dir):
         else:
             if dir.endswith('/printed'):
                 lib_dirs.add(dir)
-    dirs.remove(source_dir)
+    dirs.discard(source_dir)
     return [source_dir] + sorted(dirs) + sorted(lib_dirs)

scripts/exports.py

@@ -39,7 +39,7 @@ def bom_to_parts(bom_dir, part_type, assembly = None):
     #
     part_files = []
     bom = assembly + '.txt' if assembly else "bom.txt"
-    suffix = ".dxf" if part_type == 'svg' else '.' + part_type
+    suffix = '.' + part_type
     with open(bom_dir + '/' + bom, "rt") as f:
         for line in f.readlines():
             words = line.split()
@@ -106,7 +106,7 @@ def make_parts(target, part_type, parts = None):
     #
     # Find all the scad files
     #
-    module_suffix = '_dxf' if part_type == 'svg' else '_' + part_type
+    module_suffix = '_' + part_type
     for dir in source_dirs(bom_dir):
         if targets and os.path.isdir(dir):
             for filename in os.listdir(dir):
@@ -141,7 +141,7 @@ def make_parts(target, part_type, parts = None):
                                             with open(part_maker_name, "w") as f:
                                                 f.write("include <NopSCADlib/global_defs.scad>\n")
                                                 f.write("use <%s/%s>\n" % (reltmp(dir, target), filename))
-                                                f.write("%s();\n" % module);
+                                                f.write("%s();\n" % module)
                                             t = time.time()
                                             openscad.run("-o", part_file, part_maker_name, "-D$bom=1", "-d", dname)
                                             times.add_time(part, t)

scripts/make_all.py

@@ -39,7 +39,7 @@ if __name__ == '__main__':
     target = None if len(sys.argv) == 1 else sys.argv[1]
     set_config(target, usage)
     boms(target)
-    for part in ['stl', 'dxf']:
+    for part in ['stl', 'dxf', 'svg']:
         make_parts(target, part)
         render(target, part)
         plateup(target, part)

scripts/openscad.py

@@ -26,6 +26,8 @@ import subprocess, sys
 
 def run_list(args, silent = False, verbose = False):
     cmd = ["openscad"] + args + ["--hardwarnings"]
+    if "-D$manifold=true" in args:
+        cmd += ["--enable"] + ["manifold"]
     if not silent:
         for arg in cmd:
             print(arg, end=" ")

scripts/options.py

@@ -24,7 +24,12 @@ from colorama import Fore, init
 
 def check_options(dir = '.'):
     global options, options_mtime
-    options = { "show_threads": str(os.getenv("NOPSCADLIB_SHOW_THREADS")) }
+    options = {
+        "show_threads": str(os.getenv("NOPSCADLIB_SHOW_THREADS")),
+        "vitamin_fa"  : str(os.getenv("NOPSCADLIB_VITAMIN_FA")),
+        "vitamin_fs"  : str(os.getenv("NOPSCADLIB_VITAMIN_FS")),
+        "manifold"    : str(os.getenv("NOPSCADLIB_MANIFOLD"))
+    }
     options_fname = dir + '/options.json'
     try:
         with open(options_fname) as json_file:

scripts/plateup.py

@@ -31,8 +31,8 @@ import re
 import time
 import times
 
-source_dirs = { "stl" : "platters", "dxf" : "panels" }
-target_dirs = { "stl" : "printed",  "dxf" : "routed" }
+source_dirs = { "stl" : "platters", "dxf" : "panels", "svg" : "panels" }
+target_dirs = { "stl" : "printed",  "dxf" : "routed", "svg" : "routed" }
 
 def plateup(target, part_type, usage = None):
     #

scripts/render.py

@@ -33,7 +33,7 @@ import json
 from tmpdir import *
 
 def usage():
-    print("\nusage:\n\trender [target_config] - Render images of the stl and dxf files.");
+    print("\nusage:\n\trender [target_config] - Render images of the stl, dxf and svg files.");
     sys.exit(1)
 
 def render(target, type):
@@ -57,7 +57,7 @@ def render(target, type):
     with open(bom_file) as json_file:
         flat_bom = json.load(json_file)
 
-    things = { 'stl' : 'printed', 'dxf' : 'routed' }[type]
+    things = { 'stl' : 'printed', 'dxf' : 'routed', 'svg' : 'routed' }[type]
     colours = {}
     for ass in flat_bom:
         for part in ass[things]:
@@ -112,3 +112,4 @@ if __name__ == '__main__':
     target =  sys.argv[1] if len(sys.argv) > 1 else None
     render(target, 'stl')
     render(target, 'dxf')
+    render(target, 'svg')

scripts/tests.py

@@ -201,7 +201,7 @@ def tests(tests):
             body = bodies[type]
 
             index[type] += [cap_name]
-            body += ['<a name="%s"></a>' % cap_name]
+            body += ['<a name="%s"></a>' % cap_name.lower()]
             body += ["## " + cap_name]
 
             doc = None
@@ -259,11 +259,11 @@ def tests(tests):
                     things = BOM[thing]
                     if things:
                         body += ['### %s\n| Qty | %s |\n| ---:|:--- |%s' % (thing.title(), heading, ':---|' if '|' in heading else '')]
-                        for item in sorted(things, key = lambda s: s.split(":")[-1]):
+                        for item in sorted(things, key = lambda s: s.split(":",1)[-1]):
                             name = item
                             desc = ''
                             if thing == "vitamins":
-                                vit = item.split(':')
+                                vit = item.split(':', 1)
                                 name = '`' + vit[0] + '`' if vit[0] else ''
                                 while '[[' in name and ']]' in name:
                                     i = name.find('[[')
@@ -301,7 +301,7 @@ def tests(tests):
             for type in types:
                 if i < len(index[type]):
                     name = sorted(index[type])[i]
-                    print('<td> <a href = "#' + name + '">' + name + '</a> </td>', file = doc_file, end = '')
+                    print('<td> <a href = "#' + name.lower() + '">' + name + '</a> </td>', file = doc_file, end = '')
                 else:
                     print('<td></td>', file = doc_file, end = '')
             print('</tr>', file = doc_file)

scripts/views.py

@@ -303,7 +303,7 @@ def views(target, do_assemblies = None):
                 grand_total2 = 0
                 heading = headings[t][0].upper() + headings[t][1:]
                 print(('|  ' * len(global_bom) + '| | **%s** |') % heading, file = doc_file)
-                for thing in sorted(things[t], key = lambda s: s.split(":")[-1]):
+                for thing in sorted(things[t], key = lambda s: s.split(":",1)[-1]):
                     for ass in global_bom:
                         count = ass[t][thing]["count"] if thing in ass[t] else 0
                         print('| %s ' % pad(count if count else '.', 2, 1), file = doc_file, end = '')
@@ -313,7 +313,7 @@ def views(target, do_assemblies = None):
                         else:
                             totals[name] = count
                         grand_total2 += count
-                    print('|  %s | %s |' % (pad(things[t][thing], 2, 1), pad(thing.split(":")[-1], 2)), file = doc_file)
+                    print('|  %s | %s |' % (pad(things[t][thing], 2, 1), pad(thing.split(":",1)[-1], 2)), file = doc_file)
 
                 grand_total = 0
                 for ass in global_bom:
@@ -344,8 +344,8 @@ def views(target, do_assemblies = None):
                 print("### Vitamins",         file = doc_file)
                 print("|Qty|Description|",    file = doc_file)
                 print("|---:|:----------|",    file = doc_file)
-                for v in sorted(vitamins, key = lambda s: s.split(":")[-1]):
-                    print("|%d|%s|" % (vitamins[v]["count"], v.split(":")[1]),     file = doc_file)
+                for v in sorted(vitamins, key = lambda s: s.split(":",1)[-1]):
+                    print("|%d|%s|" % (vitamins[v]["count"], v.split(":",1)[1]),     file = doc_file)
                 print("\n", file = doc_file)
 
             printed = ass["printed"]
@@ -374,7 +374,12 @@ def views(target, do_assemblies = None):
                         print('\n|%s' % ('---|' * n), file =  doc_file)
                         for j in range(n):
                             part = keys[i - n + j + 1]
-                            print('| ![%s](dxfs/%s) %s' % (part, part.replace('.dxf','.png'), '|\n' if j == j - 1 else ''), end = '', file = doc_file)
+                            if (part[-4:] == ".dxf"):
+                                print('| ![%s](dxfs/%s) %s' % (part, part.replace('.dxf','.png'), '|\n' if j == j - 1 else ''), end = '', file = doc_file)
+                            elif (part[-4:] == ".svg"):
+                                print('| ![%s](svgs/%s) %s' % (part, part.replace('.svg','.png'), '|\n' if j == j - 1 else ''), end = '', file = doc_file)
+                            else:
+                                print("Unkown file type ", part[-4:], " for file ", part)
                         print('\n', file = doc_file)
                 print('\n', file  = doc_file)
 

tests/BOM.scad

@@ -25,11 +25,11 @@ include <../core.scad>
 include <../vitamins/sheets.scad>
 use <../vitamins/insert.scad>
 
-screw = M3_cap_screw;
+screwM3 = M3_cap_screw;
 sheet = PMMA3;
 height = 10;
 
-insert = screw_insert(screw);
+insert = screw_insert(screwM3);
 
 module widget(thickness) {
     vitamin(str("widget(", thickness, "): Rivet like thing for ", thickness, "mm sheets"));
@@ -46,7 +46,13 @@ module widget(thickness) {
 module widget_stl() {
     stl("widget")
         union() {
-            rounded_rectangle([30, 30, 3], 2, true);
+            difference() {
+                rounded_rectangle([30, 30, 3], 2, true);
+                for(x = [-10,10])
+                    for (y=[-10,10])
+                        translate([x,y,-1.5])
+                            cylinder(r=2, h=3.5);
+            }
 
             render() insert_boss(insert, height, 2.2);
         }
@@ -57,7 +63,18 @@ module widget_dxf() {
         difference() {
             sheet_2D(sheet, 20, 20, 1);
 
-            drill(screw_clearance_radius(screw), 0);
+            drill(screw_clearance_radius(screwM3), 0);
+        }
+}
+
+module mdf_svg() {
+    svg("mdf")
+        difference() {
+            sheet_2D(MDF6, 40,40);
+            for(x = [-10,10])
+                for (y=[-10,10])
+                    translate([x,y,0])
+                        drill(screw_clearance_radius(screwM3), 0);
         }
 }
 
@@ -85,11 +102,23 @@ assembly("widget_top") {
 module widget_assembly()
 assembly("widget") {
 
-    widget_base_assembly();                 // Note this is not exploded because it is sub-assembly
+    translate_z(-6) {
+        render_2D_sheet(MDF6)
+            mdf_svg();
+            
+        explode(0)
+            for(x = [-10,10])
+                for (y=[-10,10])
+                    translate([x,y,-10])
+                        screw(screwM3, 10);
+    }
+
+    explode(3)
+        widget_base_assembly();                 // Note this is not exploded because it is sub-assembly
 
     translate_z(height) {
         translate_z(sheet_thickness(sheet))
-            screw_and_washer(screw, screw_length(screw, sheet_thickness(sheet) + 3, 2, longer = true), true);
+            screw_and_washer(screwM3, screw_length(screwM3, sheet_thickness(sheet) + 3, 2, longer = true), true);
 
         explode(5)
             translate_z(sheet_thickness(sheet) / 2 + eps)

tests/PCB.scad

@@ -21,6 +21,7 @@ include <../vitamins/microswitches.scad>
 include <../vitamins/d_connectors.scad>
 include <../vitamins/leds.scad>
 include <../vitamins/axials.scad>
+include <../vitamins/radials.scad>
 include <../vitamins/smds.scad>
 include <../vitamins/7_segments.scad>
 include <../vitamins/potentiometers.scad>
@@ -60,28 +61,48 @@ test_pcb = ["test_pcb", "Test PCB",
     // components
     [
         [ 20, -5,  180, "trimpot10"],
-        [ 20, -15,  90, "trimpot10", true],
-        [  7,  2,   90, "smd_led", LED1206, "blue"],
-        [ 10,  2,   90, "smd_led", LED0805, "red"],
+        [ 20, -18,  90, "trimpot10", true],
+        [ 19,  2,   90, "smd_led", LED1206, "blue"],
+        [ 16,  2,   90, "smd_led", LED0805, "red"],
         [ 13,  2,   90, "smd_led", LED0603, "orange"],
-        [ 16,  2,   90, "smd_res", RES1206, "1K"],
-        [ 19,  2,   90, "smd_res", RES0805, "1K"],
-        [ 22,  2,   90, "smd_res", RES0603, "1K"],
-        [ 25,  2,   90, "smd_cap", CAP1206, 1.5],
-        [ 28,  2,   90, "smd_cap", CAP0805, 1.0],
-        [ 31,  2,   90, "smd_cap", CAP0603, 0.7],
-        [ 16,  6,  -90, "smd_sot", SOT23, "2N7000"],
-        [ 28,  20, -90, "smd_sot", SOT223, "LM117"],
+        [ 10,  2,  -90, "smd_res", L2012C, "1u"],
+        [ 19,  6,  -90, "smd_res", RES1206, "1M"],
+        [ 16,  6,  -90, "smd_res", RES0805, "1K"],
+        [ 13,  6,  -90, "smd_res", RES0603, "100"],
+        [ 10,  6,  -90, "smd_res", RES0502, "10"],
+        [  7,  6,  -90, "smd_res", RES0402, "1"],
+        [ 19, 10,   90, "smd_cap", CAP1206, 1.5, "1uF"],
+        [ 16, 10,   90, "smd_cap", CAP0805, 1.0, "100nF"],
+        [ 13, 10,   90, "smd_cap", CAP0603, 0.7, "10nF"],
+        [ 10, 10,   90, "smd_cap", CAP0502, 0.6, "10nF"],
+        [  7, 10,   90, "smd_cap", CAP0402, 0.5, "10nF"],
+        [ 19, 16,  -90, "smd_tant", TANT_C, "107C"],
+        [ 13, 16,  -90, "smd_tant", TANT_B, "106A"],
+        [  7, 16,  -90, "smd_tant", TANT_A, "105e"],
+        [ 32,  3,  -90, "smd_diode",DO214AC, "SS34"],
+        [ 26,  2,  -90, "smd_pot", TC33X1, "10K"],
+        [ 26,  6,  -90, "smd_coax",U_FL_R_SMT_1],
+        [  8, 23,    0, "smd_250V_fuse", OMT250, "2A 250V"],
 
-        [ 10,  10,   0, "2p54header", 4, 1],
-        [ 25,  10,   0, "2p54header", 5, 1, false, "blue" ],
-        [ 10,  20,   0, "2p54boxhdr", 4, 2],
-        [ 10,  30,   0, "2p54socket", 6, 1],
-        [ 25,  30,   0, "2p54socket", 4, 1, false, 0, false, "red" ],
-        [ 65,  50,   0, "led", LED3mm, "red"],
-        [ 75,  50,   0, "led", LED5mm, "orange"],
-        [ 90,  50,   0, "led", LED10mm, "yellow"],
-        [ 10,  45, 180, "rj45"],
+        [ 26, 10,  -90, "smd_sot", SOT23, "2N7000"],
+        [ 28, 16,  -90, "smd_sot", SOT223, "LM117"],
+
+        [ 30, 30,  -90, "smd_qfp", QFP50P1200X1200X160_64N, "ATSAM4S4BA"],
+
+        [ 45,  35,   0, "2p54header", 4, 1],
+        [ 60,  35,   0, "2p54header", 5, 1, false, "blue" ],
+        [ 60,  40, 180, "2p54header", 5, 1, false, undef, true],
+        [ 80,  33,   0, "2p54boxhdr", 4, 2],
+        [ 80,  40,   0, "2p54boxhdr", 4, 2, false, true, true],
+        [ 45,  30,   0, "2p54socket", 4, 1, false, 0, false, "red" ],
+        [ 60,  30,   0, "2p54socket", 6, 1],
+
+        [ 59,  60, 180, "led", LED3mm, "red"],
+        [ 66,  60, 180, "led", LED5mm, "orange"],
+        [ 77,  60, 180, "led", LED8mm, "blue"],
+        [ 90,  60, 180, "led", LED10mm, "yellow"],
+        [ 10,  35, 180, "rj45"],
+        [  7,  50, 180, "usb_vAx1"],
         [  8,  65, 180, "usb_A"],
         [  8, 105, 180, "usb_Ax2"],
         [  7,  85, 180, "molex_usb_Ax1"],
@@ -96,31 +117,59 @@ test_pcb = ["test_pcb", "Test PCB",
         [  5, 220, 180, "hdmi"],
         [  3, 235, 180, "mini_hdmi"],
         [ 38, 190, -90, "text", 25, 4, "Silkscreen", "Liberation Sans:style=Bold"],
-        [ 25, 200,   0, "buzzer", 4.5, 8.5],
-        [ 25, 218,   0, "buzzer"],
+        [ 25, 205,   0, "buzzer", 4.5, 8.5],
+        [ 25, 220,   0, "buzzer"],
 
-        [ 65,   9,   0, "link", inch(0.4)],
-        [ 65,  12,   0, "ax_res", res1_8, 1000],
-        [ 65,  17,   0, "ax_res", res1_4, 10000],
-        [ 65,  22,   0, "ax_res", res1_2, 100000],
-        [ 55,  22,   0, "vero_pin"],
-        [ 55,  17,   0, "vero_pin", true],
-        [ 55,   9,   0, "link", 0, 5],
+        [ 45,   1,   0, "link", inch(0.4), 0.75, undef, undef, [1.5, "red"]], // Sleeved link
+        [ 45,   3,   0, "link", inch(0.4)], // Flat link
+        [ 45,   6,   0, "ax_diode", DO_41, "1N4007"],
+        [ 45,  10,   0, "ax_diode", DO_35, "1N4148"],
+        [ 45,  14,   0, "ax_res", res1_8, 1000],
+        [ 45,  18,   0, "ax_res", res1_4, 10000],
+        [ 45,  22,   0, "ax_res", res1_2, 100000],
+        [ 35,  22,   0, "vero_pin"],
+        [ 35,  17,   0, "vero_pin", true],
+        [ 35,   8, 180, "rd_transistor", TO92, "78L05", undef,  undef, "Regulator"],
+        [ 35,  13, 180, "rd_transistor", E_LINE, "ZTX853"],
+        [ 25, 190,   0, "rd_electrolytic", ECAP8x11, "220uF35V"],
+        [ 25, 180,  90, "rd_disc",  ERZV07D471, "471"],
+        [ 25, 170,  90, "rd_disc", 6p4mm_disc, "100n"],
+        [ 30, 170,  90, "rd_disc", 10mm_disc, "1nF Y2"],
+        [ 90, 135, -90, "rd_module", HF33F, "012-HSL-3F"],
+        [ 35,   3,   0, "link", 0, 5], // Vertical wire
 
-        [ 80,   9,   0, "link", inch(0.2), inch(0.4)],
-        [ 80,  12,   0, "ax_res", res1_8, 1000000, 1, inch(0.1)],
-        [ 80,  17,   0, "ax_res", res1_4, 100,     2, inch(0.1)],
-        [ 80,  22,   0, "ax_res", res1_2, 10,     10, inch(0.2)],
+        [ 60,   3,   0, "link", inch(0.2), inch(0.4)], // Raised link
+        [ 60,   6,   0, "ax_diode", DO_41, "1N4007", inch(0.1)],
+        [ 60,  10,   0, "ax_diode", DO_35, "1N4148", inch(0.1)],
 
-        [ 60,   3,   0, "flex"],
-        [ 50,  15, -90, "flat_flex"],
-        [ 40,  15, -90, "flat_flex", true],
+        [ 60,  14,   0, "ax_res", res1_8, 1000000, 1, inch(0.1)],
+        [ 60,  18,   0, "ax_res", res1_4, 100,     2, inch(0.1)],
+        [ 60,  22,   0, "ax_res", res1_2, 10,     10, inch(0.2)],
 
-        [ 50,  50,   0, "molex_hdr", 2],
-        [ 50,  60,   0, "jst_xh", 2],
-        [ 50,  70, 180, "term254", 3],
-        [ 63,  70, 180, "term254", 3, undef, grey(20)],
-        [ 75,  70, 180, "gterm508",2, undef, "blue"],
+        [ 33,  110, -90, "rd_xtal", HC49,    "4MHz" ],
+        [ 28,  110, -90, "rd_xtal", HC49_4H, "10MHz" ],
+        [ 28,  102, -90, "rd_xtal", C_002RX, "60KHz", 3, inch(0.1) ],
+
+        [ 30,  130,-90, "rd_xtal", ACT1100, "40MHz", 0.5 ],
+        [ 30,  150,-90, "rd_xtal", ACT1700, "80MHz", 0.5 ],
+
+        [ 93,  230,-90, "rd_box_cap", BOXC18x10x16, "X2 rated film capacitor", "0.47uF 250V" ],
+        [ 93,  210,-90, "rd_box_cap", BOXC18x5x11,  "X2 rated film capacitor", "0.1uF 250V" ],
+
+        [ 77,  15, -90, "flex"],
+        [ 95,  15, -90, "flat_flex"],
+        [ 87,  15, -90, "flat_flex", true],
+
+        [ 47,  55,   0, "molex_hdr", 2],
+        [ 51,  48,   0, "molex_hdr", 2, 1],
+        [ 51,  41,   0, "molex_hdr", 2, -1],
+        [ 45,  65,   0, "jst_xh", 2],
+        [ 54,  65,   0, "jst_ph", 2],
+        [ 61,  65,   0, "jst_zh", 2],
+
+        [ 50,  75, 180, "term254", 3],
+        [ 63,  75, 180, "term254", 3, undef, grey(20)],
+        [ 75,  75, 180, "gterm508",2, undef, "blue"],
 
         [ 50,  90, 180, "gterm35", 4, [1,2]],
         [ 63,  90, 180, "gterm35", 4, [1,2], "red"],
@@ -139,20 +188,28 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 55, 170,   0, "button_4p5mm"],
         [ 50, 185,   0, "microswitch", small_microswitch],
         [ 52, 200,   0, "pcb", 11, TMC2130 ],
-        [ 80, 210,   0, "pdip", 24, "27C32", true, inch(0.6) ],
+        [ 76, 210,   0, "pdip", 24, "27C32", true, inch(0.6) ],
         [ 80, 180,   0, "pdip", 8, "NE555" ],
-        [ 80, 166, -90, "smd_soic", SOIC18, "PIC18F88"],
+        [ 71, 180,   0, "smd_inductor", IND2525, "4R7"],
+
+        [ 87, 166, -90, "smd_soic", SOIC18, "PIC18F88"],
+        [ 78, 166, -90, "smd_soic", SOIC14, "74HC00"],
         [ 71, 166, -90, "smd_soic", SOIC16, "ICL323"],
         [ 64, 166, -90, "smd_soic", SOIC8, "M34063"],
-        [ 80, 150,   0, "chip", 10, 5, 1, grey(20)],
+        [ 70, 150,   0, "chip", 10, 5, 1, grey(20)],
+
+        [ 90, 140, -90, "relay", HF33F, "012-HSL-3F"],
+
 
         [ 52, 206,   0, "2p54socket", 8, 1 ],
         [ 52, 194,   0, "2p54socket", 8, 1, false, 0, false, "red" ],
-        [ 50, 220,   0, "standoff",  5, 4.5, 12.5, 2.54],
-        [ 50, 240,   0, "potentiometer"],
+        [ 55, 220,   0, "standoff",  5, 4.5, 12.5, 2.54],
+        [ 60, 240,   0, "potentiometer"],
         [ 75, 240,   0, "potentiometer", KY_040_encoder, 8],
+        [ 40, 235, -90, "rd_cm_choke", ATX_CM_CHOKE, "3.5mH"],
+        [ 40, 217,   0, "rd_coil", IND16x10, "4.7uH"],
         [ 30,  85, -90, "7seg", WT5011BSR, 2],
-        [ 30, 55, -90, "D_plug", DCONN9],
+        [ 30,  55, -90, "D_plug", DCONN9],
     ],
     // accessories
     []
@@ -160,5 +217,5 @@ test_pcb = ["test_pcb", "Test PCB",
 
 
 if($preview)
-    let($show_threads = true)
+    let($show_threads = true, $solder = pcb_solder(test_pcb))
         pcb(test_pcb);

tests/PCB_utils.scad

@@ -0,0 +1,48 @@
+//
+// NopSCADlib Copyright Chris Palmer 2023
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+include <../utils/core/core.scad>
+
+use <../utils/pcb_utils.scad>
+
+module pcb_utils() {
+    let($solder = [1, 0, 1.6])
+        solder();
+
+    r = 2;
+    h = 10;
+
+    color(grey(20))
+        cylinder(r = r, h = h);
+
+    color("silver")
+        vflip()
+            cylinder(d = 0.6, h = 3, $fs = fs, $fa = fa);
+
+    color("white")
+        translate_z(h / 2)
+            cylindrical_wrap(r = r)
+                resize([0, h * .8], auto = true)
+                    rotate(90)
+                        text("Hello", halign = "center", valign = "center");
+}
+
+if($preview)
+    rotate(-45)
+        pcb_utils();

tests/PCBs.scad

@@ -39,9 +39,16 @@ module pcbs() {
             translate([0, -pcb_width(perfboards[$i]) / 2])
                 pcb_assembly(perfboards[$i], 5 + $i, 3);
 
+    translate([0, 125])
+        layout([for(p = big_pcbs) spacing(p)], 0)
+            translate([0, pcb_length(big_pcbs[$i]) / 2])
+                rotate(90)
+                    pcb_assembly(big_pcbs[$i], 5 + $i, 3);
+
     for(p = pcbs_not_shown)
         hidden()
             pcb(p);
 }
 if($preview)
-    pcbs();
+    let($show_threads = false)
+        pcbs();