Compare commits

...

130 Commits
v037 ... v066

Author SHA1 Message Date
byuu
a266a2b5e2 Update to bsnes v066 release.
Major features in this release are: serial controller emulation, a brand new scheduler that supports multiple simultaneous coprocessors, and accuracy improvements.
The serial controller is something devised by blargg. With the proper voltage adjustments (5v-9v), it is possible to wire an SNES controller to a serial port, which can then be used for bidirectional communication between the SNES, and (usually, but not only) a PC. The support in bsnes was added so that such programs could be debugged and ran from within an emulator, and not just on real hardware.
The scheduler rewrite was meant to allow the combination of coprocessors. It was specifically meant to allow the serial controller thread to run alongside the SuperFX and SA-1 coprocessor threads, but it also allows fun things like MSU1 support in SuperFX and SA-1 games, and even creating dev cartridges that utilize both the SuperFX and SA-1 at the same time. The one thing not yet allowed is running multiple instances of the exact same coprocessor at the same time, as this is due to design constraints favoring code inlining.
There are two important accuracy updates. The first is that when PAL video mode is used without being in overscan mode, black bars are shown. Emulators have always shown this black bar at the bottom of the screen, but this is actually incorrect. resxto took pictures from his PAL TV that shows the image is in fact vertically centered in the screen. bsnes has been updated to reflect this.
Also interesting is that I have backported some code from the dot-based PPU renderer. In the game Uniracers, it writes to OAM during Hblank, and expects the write to go to a specific address. In previous releases, that address was hard-coded to go to the required memory location. But the way the hardware really works is that the write goes to the extended attribute address for the last sprite that the PPU fetched, as the PPU is still asserting the OAM address bus. Now, due to the precision limitations, I was not able to also port timing access during the active display period. However, this is sufficient to at least remove the last global hack from the older, speed-focused scanline renderer.
2010-08-01 05:46:17 +00:00
byuu
53f03be5a2 Update to bsnes v065r05 release.
Fairly major changes here, I'd appreciate some testing if anyone's not
busy. Note that the save state version has been bumped, so consider
WIP saves unstable until v066 official.

Rewrote the entire scheduling system. Instead of having a global class
that all of the chips call into, each class now contains its own
thread, clock and frequency information. They also implement their own
syncing primitives, but with a tiny bit of standardization.
void step(unsigned clocks) -- add to/subtract from counter based on
master/slave select.
void synchronize_chip() -- make sure chip is caught up to our current
thread before continuing.

So we go from scheduler.sync_copcpu() to sa1.synchronize_cpu(); with
the sa1. being omitted inside the SA1 class itself.

The S-CPU implementation also adds an array<Processor*> coprocessors;
list, and iterates them all. This allows bsnes to have an infinite
number of additional coprocessors at the same time. But there is still
the limitation of only one of each type. So you can use the XML memory
mapping to make a cartridge that contains a SuperFX2 chip, an SA-1
chip, an MSU1 chip and that can be debugged via serial communications.
However, you can't make a cart that has two SA-1 chips. That
limitation probably could be overcome as well, but it's less
important. I mainly wanted to be able to use MSU1 and Serial on
special chip games.

I implemented the synchronization primitives in the chip base classes,
which means that for inlining purposes I had to make it all global, so
you'll have src/cpu/synchronization.hpp, etc now. This was to reduce
some redundancy of having the same exact code inside both bPPU and
sPPU, etc. I'll probably make a Coprocessor : Processor class to
automatically implement the step+synchronize_cpu functions for the
five coprocessors next.

The Scheduler class is actually still around, but it's very trivial
now. It simply saves the program thread and last active emulation
thread for the purpose of entering and exiting emulation. Because I
killed Scheduler::init(), which was responsible for destroying and re-
creating threads, I had to create the threads inside
ChipName::create(), which I call at power and reset. This means that
to load a save state, the system needs to be reset to destroy those
threads.

This caused some troubles with the SA-1, specifically in Kirby's
Dreamland 3, but no other games I tried. I had to move the SA-1 bus
initialization to the power-on event, and only reset when loading a
save state. It would appear that the SA-1 is leaking bus mapping state
information, presumably from the SA-1 MMIO registers that control some
of the mapping layout. If I add remapping of those sections into the
SA1::serialize() function, it should take care of that problem and I
can move sa1bus.init() back into SA1::reset().

All of this results in a 2-3% speed hit for normal games, and a 6-7%
speed hit for special chip games. The former should not have any speed
hit, so I will have to look into what's going on there. The latter we
have no choice on, to allow for more than one coprocessor, the
coprocessor synchronization needs to iterate a list, compared to a
single hard-coded check in the previous builds. If I can figure out
what is happening with the regular game speeds, it should drop the
special chip hit to 4%. Worst part is this hit is in addition to the
10-15% speed hit from v065 official where I wasn't syncing the special
chips up to the CPU except once per scanline and on MMIO accesses.

But that's progress. v065 is definitely going to be the preferred
build for playing SuperFX/SA-1 games for a long time to come.
2010-07-29 16:24:28 +00:00
byuu
77375c3c68 Update to bsnes v065r04 release.
Only posting because the link changed, it's the exact same as r03.
Only difference is some improvements to nall:
- string class gains lower(), upper(), transform(), *trim(_once)
- file::print now accepts variadic arguments like print
Examples:
    strtr(item, "ABCDEF", "abcdef"); -> item.transform("ABCDEF",
    "abcdef");
    strlower(item); -> item.lower();
    fp.print(string("Age: ", age, "\n")); -> fp.print("Age: ", age,
    "\n");
2010-07-16 14:40:08 +00:00
byuu
dce3e61f06 Update to bsnes v065r03 release.
Polishing work. My dlopen wrapper accepts an optional path argument
now, and the basename setting is universal instead of just for MSU1,
so serial-based games can load in a dynamic client library directly.

Still need to update snesserver to accept another argument for the
program library name to load.

Upped the serial polling frequency to 8x UART speed per blargg.

And a very tricky change, I updated nall/string to remove sprint(). At
first, I used:
    string name = string() << path << basename << ".msu";


I then improved upon that with:
    string name = sprint(path, basename, ".msu");


Tonight I went ahead and finished this by taking advantage of variadic
templates for the constructor itself. Very tricky because my
conversion functions created new strings to copy data into, which
would create an infinite loop; then of course I also had to leave the
copy constructor behind even after this. So the end result is the
following:
    string name(path, basename, ".msu");


Oh, and I found a typo in MSU1, it wasn't using the proper extension
when loading a save state for the data file.
2010-07-12 15:56:17 +00:00
byuu
20b44ddfd1 Update to bsnes v065r02 release.
Be warned, this is going to get complicated.

To start out with, serial.tar.bz2 is a simple SNES program that is
right now being used for integrity testing. The important part is
here:

    serial_read:
    lda #$01
    -; bit $4017; bne -
    -; bit $4017; beq -
    nop #24
    pha; lda $4017; eor #$01; ror; pla; ror; nop #18
    pha; lda $4017; eor #$01; ror; pla; ror; nop #18
    pha; lda $4017; eor #$01; ror; pla; ror; nop #18
    pha; lda $4017; eor #$01; ror; pla; ror; nop #18
    pha; lda $4017; eor #$01; ror; pla; ror; nop #18
    pha; lda $4017; eor #$01; ror; pla; ror; nop #18
    pha; lda $4017; eor #$01; ror; pla; ror; nop #18
    pha; lda $4017; eor #$01; ror; pla; ror; rts

    serial_write:
    pha #6; pla #6; wdm #$00; stz $4016; sec
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; ror
    pha #6; pla #6; wdm #$00; sta $4016; rts


Fairly ugly, but it works.

Next, I needed a way to be able to execute the client in such a way
that it would work with both bsnes and real hardware, with no
recompilation or changes needed. The nice way would be some form of
inter-process communication, but well, I don't really do that. And
it's probably extremely platform-dependent.

So I used what was available to me already, a cross-platform dlopen
wrapper for dynamic library support. The client application is written
and compiled into a shared library that exports a single function,
snesserial_main, which runs as if it is its own program and never
returns. It takes three parameters, the time tick(), read() and
write() function pointers. It can call them to do its work. This
process is put in a folder called snesserial for now. It's the
accompanying program to serial.sfc.

Now I have both bsnes (v065.02 above) and snesserver, they both act
the same way. They load in snesserial, and give it those three
functions and call its main entry point. The difference is that the
read/write functions in bsnes simulate a serial strobe to the
emulator, and the read/write functions in snesserver actually read and
write to the TTY device you specify as the program argument, eg for me
I use: ./snesserver /dev/ttyUSB0
Mmm, USB<>SNES for the win.

There's a limitation in my dlopen wrapper, it adds the libN.so or
N.dll stuff automatically, making it difficult to also specify a path.
That means that for now you have to put libsnesserial.so into
/usr/local/lib. Obviously you don't want to be limited to just one
program. The plan is to have it load the library that matches the game
name:
zelda.sfc + zelda.so/zelda.dll/zelda.dylib (yeah, no libzelda.so.)

Now, the bsnes+serial emulation works on any platform. However,
snesserver only works on Linux. You can blame that one on Microsoft.
They make you require special kernel drivers to be able to access the
serial port. I'm not going through the trouble. OS X can probably use
it if it makes the appropriate /dev/tty device, but I'm not going to
test it.

Activating the module can only be done with a custom XML file, as
before. Still need to work on integration with the controller port
options, as it's not really a special chip.

Lastly, the timing is "pretty good", but not perfect. It accepted a
374 cycle-per-bit loop for serial writes from the SNES to the PC, but
snesserver did not. I had to adjust to 364 cycle-per-bit loop for it
to work on both.

This is really bad, because the goal here is to use the PC as the
testbed to make sure it'll work on the real thing. On the plus side,
you only have to get it working one time, and stick with the
serial_read/serial_write functions like at the top of this post. But I
do need to address this. I'm not entirely sure how to more accurately
simulate a serial port at this point though.

Oh, and I am thinking I need to expand the read/write functions to
process more than one byte at a time. That should greatly speed up
transfer time on the real thing. I also need to add some slowdown so
the emulator more closely matches hardware speeds.
2010-07-11 18:27:42 +00:00
byuu
79f20030a0 Update to bsnes v065r01 release.
In order to fully decode the 16MB address maps, I am going to need to
use blargg's stop-and-swap, which will require a serial-communications
program. To develop this program, and others in the future, as well as
for testing automation, it would be very beneficial to have a way to
debug these programs through bsnes.

So what I'm working on now is emulating a serial port inside bsnes.
The basic premise is to start with a custom XML map that specifies its
presence:

    <?xml version="1.0" encoding="UTF-8"?>
    <cartridge region="NTSC">
    <rom>
    <map mode="linear" address="00-7f:8000-ffff"/>
    <map mode="linear" address="80-ff:8000-ffff"/>
    </rom>

    <ram size="2000">
    <map mode="linear" address="70-7f:0000-7fff"/>
    </ram>

    <serial baud="57600">
    </serial>
    </cartridge>


I am essentially treating the serial communication as a special chip.
One could argue this belongs as an option under controllers, and one
would be right. But as I can't have two coprocessor threads at the
same time, this is how it is for right now. Eventually it'll probably
be under controller port 2, and only enabled in the debugger builds.

So, this pseudo-coprocessor ... it's basically emulating the PC-side
communications program.
Meaning I still need to externalize this somehow so that any program
can be run.
The below program writes 0x96 six times, and then reads in data six
times. Well, technically forever, but the SNES ROM only writes six
times at the end.

    void Serial::enter() {
    scheduler.clock.cop_freq = cartridge.serial_baud_rate() * 2;

    latch = 0;
    add_clocks(512);

    for(unsigned i = 0; i < 6; i++) {
    latch = 1; add_clocks(2);

    latch = 1; add_clocks(2);
    latch = 0; add_clocks(2);
    latch = 0; add_clocks(2);
    latch = 1; add_clocks(2);
    latch = 0; add_clocks(2);
    latch = 1; add_clocks(2);
    latch = 1; add_clocks(2);
    latch = 0; add_clocks(2);

    latch = 0; add_clocks(2);
    }

    while(true) {
    while(cpu.joylatch() == 0) add_clocks(1);
    while(cpu.joylatch() == 1) add_clocks(1);
    add_clocks(1);

    uint8 data = 0;
    for(unsigned i = 0; i < 8; i++) {
    add_clocks(2);
    data = (data << 1) | cpu.joylatch();
    }

    print("Read ", strhex<2>(data), "\n");
    }
    }


The SNES code looks like this:

    //21,477,272hz cpu / 57,600hz serial = ~372.87 clocks/tick

    org $8000
    xce; rep #$10
    ldx #$01ff; txs

    jsr serial_read; sta $700000
    jsr serial_read; sta $700001
    jsr serial_read; sta $700002
    jsr serial_read; sta $700003
    jsr serial_read; sta $700004
    jsr serial_read; sta $700005

    nop #46

    jsr serial_write
    jsr serial_write
    jsr serial_write
    jsr serial_write
    jsr serial_write
    jsr serial_write

    //hang
    -; bra -

    serial_read:
    -; lda $4017; and #$01; bne -
    -; lda $4017; and #$01; beq -
    nop #23; lda $00; nop #10

    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13
    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13
    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13
    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13
    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13
    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13
    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13
    lda $4017; and #$01; asl $00; ora $00; sta $00; lda $00; nop #13

    rts

    serial_write:
    lda #$01; sta $4016; nop #23

    lda #$00; sta $4016; nop #23

    lda #$01; sta $4016; nop #23
    lda #$00; sta $4016; nop #23
    lda #$00; sta $4016; nop #23
    lda #$01; sta $4016; nop #23
    lda #$00; sta $4016; nop #23
    lda #$01; sta $4016; nop #23
    lda #$01; sta $4016; nop #23
    lda #$00; sta $4016; nop #23

    lda #$01; sta $4016; nop #23

    rts


That reads six times, and then writes six times.

I haven't made the test do an infinite PC->SNES transfer, but I have
for SNES->PC. No errors after millions of bytes, even if I stride the
CPU timing.

As this is just an example, it's pretty lousy with actual timing, but
I guess that's a good thing as it still works quite well. More
tolerance = less potential for errors.

**Now, this part is important.**

While debugging this, I noticed that my serial coprocessor was only
running when Vcounter=n,Hcounter=0. In other words, nothing was making
the CPU synchronize back to the coprocessor, except the once-per-
scanline synchronization that was there in case of CPU stalls.

That's ... really bad. MSU1 worked only because it buffers a few
hundred samples for audio mixing. I don't really know why this didn't
cause an issue for SuperFX, SA-1 or Super Game Boy games; but in
theory they were at most 682x less precise than they should have been
in terms of CPU->coprocessor synchronization.

Making it sync after every add_clocks() call results in a 10% speed
hit to SuperFX, SA-1 and Super Game Boy emulation, unfortunately.

I don't notice any quality improvements in emulation, but in theory
the lack of this syncing before effectively eliminated the benefits of
the SuperFX and SA-1 being cycle based.

I'm going to have to look into this more to understand if I was
intentionally not doing this sync before, or if I really did forget
it. I'm thinking it was an oversight right now. The SuperFX and SA-1
don't really talk back and forth a whole hell of a lot, so once a
scanline probably wouldn't be that noticeable.

But holy hell ... now that I'm thinking about it, I wonder if this was
the cause of all that craziness in trying to sync up the Super Game
Boy's VRAM transfers. Yeah, definitely need to look into this more ...
2010-07-09 15:02:23 +00:00
byuu
79b939e1c7 Update to bsnes v065 release.
It's been a while, so here is a new release of bsnes.
Unfortunately I don't have a full changelog this time. Most of the work went into stabilizing libsnes (which is used by the experimental .NET, Cocoa and Python UIs; as well as by Richard Bannister's OS X port).
The Windows binary package now comes with all three variants included: bsnes.exe, the standard version that casual users should run; bsnes-debugger.exe, for SNES programmers and ROM hackers only; and bsnes-accurate.exe, which should not be used by anybody, ever.
In all seriousness, bsnes-accurate.exe is bsnes with the dot-based S-PPU renderer. It's twice as slow as the normal build, and you won't really notice any differences except in Air Strike Patrol. It's there for the curious and for any SNES programmers who want to try making some really awesome video demos.
Changelog:
* OS X port builds once again; now requires gcc44 from Macports
* libsnes API finalized
* fixed a bug with S-CPU debugger breakpoints
* various source cleanup
2010-06-27 12:29:18 +00:00
byuu
3ae74ff5a5 Update to bsnes v064r08 release.
Fixes Super Game Boy save RAM/RTC data.
Fixes a crash when you pass a null pointer for the second Sufami Turbo
cartridge, etc.

[No archive available]
2010-06-14 02:01:12 +00:00
byuu
7351b910c5 Update to bsnes v064r07 release.
Wow, that's probably a record for the longest time between two WIPs.
My priority has obviously shifted to language learning, but as time
goes on things should balance out better.

Okay, changes:
- linear_vector, pointer_vector and array are greatly improved: added
insert and remove (can insert or remove more than one item at a time
for O(n) performance); renamed add to append; improved array::find to
use optional<unsigned> instead of -1 trick ala the new strpos function
- fixed string to floating-point conversion for international systems
that use "," for fractions
- libsnes::snes_get_memory_(size|data) will return 0 if you try and
access: BS-X data without a BS-X cartridge loaded, same for ST, same
for SGB; this is in case someone tries to write a generic function
that writes all memory that is valid instead of special casing based
on the cartridge type they loaded
- libsnes::snes_load_cartridge_* returns a boolean result to indicate
success; always returns true for now, but it's meant to eventually
catch when libgambatte fails to load a GB cartridge -- bsnes itself
will never fail to load an SNES/BSX/ST cartridge
- Linux monospace font changed from "Monospace" to "Liberation Mono",
because the former is not monospaced when your desktop environment is
set to Japanese, etc.
- some other misc. cleanups

[No archive available]
2010-06-06 05:28:35 +00:00
byuu
6bbb609f2f Update to bsnes v064r06 release.
Updated to build using Xcode Snow Leopard+Qt/Cocoa 4.6.2+Macports
gcc44.
2010-05-03 14:04:30 +00:00
byuu
0d19902435 Update to bsnes v064r05 release.
- swaps the video_refresh output from BGR555 to RGB555, for the sake
of direct copying for certain APIs. Not going to do RGB565 because the
G5 bit doesn't exist, and faking it is lame.

[Meanwhile, in bsnesui 2010-04-24...]

bsnes.python:
- adds more icons and stuff.
bsnes.net:
- new port, targets C#, binds every function in libsnes
- targets .NET 3.5 ... I honestly would have went with 4.0 for the
nicer IntPtr addition alone, but the SP3 requirement may put off a lot
of people
- video output that doesn't scale (or clean up when dropping to a
smaller size)
- Port1 joypad input support via keyboard only
bsnes.cocoa:
- stuck in a time/space wormhole until Apple gets their heads out of
their asses and updates GCC

Probably the coolest thing about Python and .NET is that anyone can
now compile these GUIs and modify them just by having the run-times
installed. I really like the way MS is distributing the complete
development chain along with the run-time.
2010-04-25 08:39:41 +00:00
byuu
44bab83d68 Update to bsnes v064r04 release.
Fixes S-CPU debugger breakpoint issue.
libsnes always returns 0 for "no memory present" now, never -1U.

[Meanwhile, in bsnes-python 2010-04-20...]

Won't error if there's no joypad present.
Swaps menu and status bars with a toolbar.
Adds keyboard support - you can use both a keyboard and joypad for
input now.
Won't crash if RAM doesn't exist yet.
Won't crash if game uses no RAM.
2010-04-20 22:33:44 +00:00
byuu
42a4c1d60e Update to bsnes v064r03 release.
Some changes to libsnes. Really hoping the API will be stable from
this point out ...
2010-04-19 17:37:14 +00:00
byuu
645689e683 Update to bsnes v064r02 release.
Nothing interesting, just added bsnes-qt.py to ui_python. No input
handling, but OpenGL-based video resizing and libao audio. Doesn't use
numpy, found a workaround for that. It's obvious that we need
video/audio/input handled by an external library for this to work, so
I'm thinking now about a rewrite of ruby to a C-like interface.
2010-04-18 14:09:17 +00:00
byuu
8b0153daf0 Update to bsnes v064r01 release.
Adds bool snes_get_region(void) to libsnes (permanent).
Adds snes_blit_colortable and snes_blit to libsnes (temporary).
Adds src/ui_python with a basic Python GUI, and abstraction between
the libsnes wrapper and PyGTK (so it can be reused for PyQt, etc.)

The GUI has:
- menubar
- video output (2x scale, supports NTSC/PAL, hires, overscan and
interlace correctly)
- audio output (libao through ALSA)
- input (very lousy key press events, they toggle off and on if you
hold a key down ...)

I'm getting full-speed, so that's good.

Not sure where I want to take all of this stuff yet, but it's kind of
neat for now I suppose. It would be kinda fun to go really out there
with completely new GUI design styles that aren't just your standard
menubar+video. Things like a toolbar, mouse gestures, really deep
platform integration, AVI-based recording, frame analysis shit, game-
specific GUI shit (perhaps map touch-screen input + gyroscope on top
of a simulated gamepad; or perhaps read the contents of RAM and
provide statistical information on the sides of the video output
screen?), I dunno ... whatever. It's there, it's possible, but it's
certainly not good enough to replace the official C++ Qt port, and I
don't really have the time or patience to make it that good myself.
2010-04-16 13:40:27 +00:00
byuu
9ca1e259cb Update to bsnes v064 release.
A thank you to everyone who helped test the RC to ensure stability. I've uploaded the official v064 release to Google Code.
The most important change in this release is the cycle-based PPU renderer; but due to performance reasons the scanline-based renderer remains the default in the Windows binary. If you want to try out the cycle-based renderer, you will need to compile from source for now.
Another major change is the introduction of libsnes, which allows one to build bsnes as a shared library that can be used from other programming languages. It is intended both to create a regression testing framework, and to provide API stability for the various projects that use the bsnes core. While I can't guarantee the API to libsnes won't change, I will properly revision it and do everything I can to avoid changing it if possible.
2010-04-14 15:46:56 +00:00
byuu
7227107d5e Update to bsnes v063r14 release.
- libsnes updated ... should be the official syntax now, I don't
expect any more changes
- added kode54's patch for HQ2x
- NOT going to add the libjma Windows Unicode fix, I want something
more elegant than hijacking all of std::ifstream, so that can wait for
now
- fixed status.irq_lock for Power Rangers
- went back to blargg's 1.024MHz S-DSP for the fast build
- updated mightymo's cheat pack to the latest version
2010-04-13 15:21:37 +00:00
byuu
65ff00e28a Update to bsnes v064rc1 release.
I'm posting a release candidate for v064, for which I am looking for beta testers. If you would like to help out, please give it a try and report any bugs or regressions on the forum. If all goes well, this will be posted as v064 official shortly.
Note that you will need the Qt run-times from bsnes v063 official to use this. Also, this build does not use the new cycle-based PPU. Official builds are going to continue using the scanline-based renderer. This build should be about 10% faster than v063 was, which should lower the system requirements further.
2010-04-12 15:25:39 +00:00
byuu
717aa69d42 Update to bsnes v063r12 release.
Well I really don't want to think about a caching system right now, so
I skipped that.

- added sPPU::Background::get_tile(), which computes its own copies of
mask_xy, screen_xy, tile_size, etc; allows BG3 offset-per-tile to
compute tile correctly
- fixed two V=(start of Vblank) checks that lacked overscan tests
- removed fade stuff from video output, going to rely exclusively on
filters for that stuff now
- modified state. to t. for brevity
- cached regs.overscan for overscan() function
- PPUDebugger uses interlace_enable() and overscan_enable() to avoid
conflicts with the base classes; forgot to move PPUcounter to
PPUCounter
- added controller selection capability to libsnes; still needs cheat
code and save state support

Should fix that Adventure Island thing, confirmation would be
appreciated.

I tried some quick hacks and was able to get mode7 caching (NHL '94)
and OAM caching (Winter Gold) working without breaking anything, but
it's too scanline-PPU for my tastes. There's really no reason to half-
ass this just to get games playable, so I'll wait and do it the right
way later on.

Only worked on this for about an hour today ... I must be burned out.
Think I'll try messing around with Python or something, since Ruby is
a dead-end for using libsnes.
2010-04-11 13:00:48 +00:00
byuu
35fdb71f3d Update to bsnes v063r11 release.
Writing to SETINI will update video mode priorities for EXTBG mode.
Merged pixel output { main, sub { valid, priority } } into just
priority. A priority of zero is considered invalid now.
Merged pixel output { main, sub { palette_index, palette_number } }
into just palette with the tiledata bits for direct color mode at
d8-d10.
This cuts a lot of copying and extra comparisons out of the final
screen rendering pass, though it doesn't really help speed.
Output is always 512x448 now. Having trouble deciding on how to do
video for that, but I'll post more on that later.
Really need to figure out how offset-per-tile fetches in regards to
lores v hires and SC size, tile size and wrapping.
For now, I simplified it to constants; whereas the scanline-renderer
uses the BG3 settings.
I also made it not perform OPT lookup on BG3 and BG4 anymore. Skips a
pointless trickery of setting the OPT valid bit to zero for BG3,BG4
and is faster.
Forgot an overscan check in sprite drawing, should draw sprites
properly to V=225-239 now.
Made the mode7 variable names more consistent.
2010-04-09 16:00:03 +00:00
byuu
c33f70a8c6 Update to bsnes v063r10 release.
With this release, the final last-generation holdout, the scanline-based PPU renderer, has been replaced with a true, accurate, cycle-level PPU that renders one dot at a time. Finally, this fulfills the greatest milestone remaining in the SNES emulation scene. With every processor emulated at the lowest possible level, SNES emulation finally rivals the accuracy levels that NES emulators have offered for years.
Now, please do understand that this release is not a beta, nor is it even an alpha. It is simply a preview of things to come, and as such you can consider it a pre-alpha. There are many caveats at this time.
First, it is very slow. More than twice as slow as v063 official. There have been absolutely no optimizations whatsoever to the new dot-based renderer. I do expect to be able to speed this up significantly in future releases.
Second, this may lock up on Windows Vista and later for unknown reasons. I haven't had a chance to look into it; so stick with Windows XP or Linux for now.
Third, save states are not supported yet. If you try and use them anyway, bad things will happen.
Fourth, and most importantly, this isn't 100% bit-perfect by any stretch of the imagination. Off the top of my head, memory is accessed far too often, the OAM and CGRAM address lines are not controlled by the S-PPU during active display, none of the various glitches are supported, and the OAM renderer does not pre-cache the next scanline's sprites, it happens on the same line for now.
I will obviously be doing my best to improve the accuracy of the aforementioned things. But even with those missing, this is still leaps and bounds above a pure scanline-based renderer. It essentially provides 682 times the parallelism. It is enough to finally properly emulate the shadow effect in Air Strike Patrol, and it finally eliminates the "PPU Hclock render position" hack once and for all.
Lastly, you'll need the DLLs from v063 official. I didn't bother to include them this time.
Enjoy!
2010-04-07 14:40:59 +00:00
byuu
0a3fdc404d Update to bsnes v063r09 release.
So that's about 24 solid hours worth of programming in two days. Holy
fuck am I exhausted. Don't expect the last bits any time soon.

Missing features:
- Mode 7 renderer
- OAM previous-line caching
- offset-per-tile mode
- some edge cases in color add/sub
- hires
- interlace
- overscan
- S-PPU control over VRAM, OAM, CGRAM during active display

Speed hit is about as bad as I had feared. 172fps with scanline
rendering to 80fps with dot rendering. I'm guessing that with
optimizations I can make it to ~100-110fps.
2010-04-05 18:38:43 +00:00
byuu
efa7879c6d Update to bsnes v063r08 release.
No binary, this is just a point release.

I have basic lores BG1-4 rendering with mosaic added. No offset-per-
tile, no windowing, no color math (requires windowing), no sprites, no
hires, no interlace, no mode7.

It's enough to see how powerful the concept is already, though.
- Battle Blaze intro looks just fine (can't beat a battle because I
can't see my sprites or save states yet)
- Dai Kaijuu Monogatari II stat bar looks fine (no duplicated line)
- Super Metroid looks fine (no extra status bar line)
- Air Strike Patrol shows the translucent shadow for your plane (but
the left-hand scrolling is glitchy ... not sure what's up yet)

Speed is ... yeah, it's bad. About 50-60% speed. But it can get
better, I'm being really lazy and completely recomputing everything
for each pixel. A very large number of these operations can be cached.
I'm going to wait until the renderer matches the quality of the
scanline-renderer before optimizing; and I'm not going to push too far
on optimizing this (eg I probably won't bring back the tiledata
planar->packed conversion cache.)

I'm designing this similar to MooglyGuy's N64 renderer, putting each
component in its own class. So far I'm really liking the concept.
2010-04-05 13:28:36 +00:00
byuu
b11f22f517 Update to bsnes v063r07 release.
src/lib is no more, merged libco, nall and ruby into src/.

libsnes has been improved, builds in when you "make library" now.

XML memory map generation happens from a nall template header, so both
libsnes (used by ui_sdl) and ui_qt can run again without snesreader.

ui_sdl improved, can run any game via command-line, but doesn't load
or save RAM yet.

And most importantly, much work has gone into sPPU, the new cycle-
based PPU renderer. It has enough support to be compatible with all
games ($2134-213f are mostly complete, just missing range/time over
flags and VRAM/OAM/CGRAM blocking.) It only renders the back color, as
if you had all BG and OAM layers disabled.

At this point, if you run Air Strike Patrol, thanks to its gradient
fade highlighting, you can see the plane's shadow, just as on real
hardware now. It also runs test_hello and test_noise, which I will
upload shortly.
2010-04-04 18:42:09 +00:00
byuu
9614275b34 Update to bsnes v063r03 release.
Extremely substantial code structure changes this time. Probably the
most in four years.

All of the SNES core now resides in src/snes, and the contents of
system have been unrolled into this directory as well. This folder
gets its own Makefile now, and some special build commands, "make
library" and "make install-library". This creates static and dynamic
link libraries of the core, completely devoid of Qt, ruby, the GUI,
etc.

There's a new module as well, src/snes/libsnes. This is a C interface
that will let you initialize and control the bsnes core without the
need for anything more than a 1KB header file.

To test this, I've created a UI fork, ui_sdl. Very very simple, 2KB,
nothing there at all really, it just boots up Zelda 3 and runs it
directly with keyboard input support and video only. The important
point here is that the ui_sdl project does not reference the core, or
ruby, or Qt, or anything else, and is fully C++98 (though it could
also be C89 if desired.)

Now I'm being a bit lazy and using the compiled objects directly, but
it'd be just as easy to replace them with a library include directive,
or even dynamically link against the shared library and use an
entirely different language.

It's not actually my goal to make a C++ SDL port, what I really want
to do is make a port using Ruby only. May not be so easy, we'll have
to see how one accesses shared libraries in it.

The main src/Makefile was also simplified for the sake of supporting
non-Qt code. All of the Qt and ruby references were moved into the
src/ui_qt/Makefile.

I fixed up aDSP to compile again, but you still have to manually
comment out sDSP and comment in aDSP. Doing so will net you a 6-12%
speedup at the cost of some accuracy.

Lastly, I added a workaround for the Battletech 3050 splash screen.
2010-04-02 15:22:04 +00:00
byuu
9995876bc5 Update to bsnes v063r02 release.
It would be a really good idea to test all of the HDMA-sensitive games
with this WIP, if anyone's up for it.

Rewrote most of sCPU::DMA. It now implements a parallel two-stage
pipeline to more closely model the hardware. Even if it turns out to
be wrong, simply making dma_write() immediate would revert it to the
old behavior. Fixed a bug where HDMA init and run were always syncing
to the DMA counter, even when a DMA was already in progress. Will
speed up the S-CPU in a very, very small number of games, namely
College Football '97. Most games avoid this because it can crash
CPUr1. New DMA variables means new save state version, sorry.

I did not add the MDR override code, because it's too fucking insane.
Speedy Gonzales still works.

Removed the status bar size grip entirely. There's really no point in
it being there in windowed mode since you can already grip the sides
of the window anyway. Added space to each side of the status text so
that it doesn't nail the very edge of the monitor.

Added checks in XML mapping to not map in special chip sections when
you try and load BIOSes directly, which will stop the SGB and BS-X
BIOSes from crashing the emulator. Load it the right way and it'll
work fine, as always.

Fixed the loader window to display screenshots properly when you have
HTML entities in the filename, eg &, < and >.
2010-03-31 13:40:33 +00:00
byuu
43a3991ddf Update to bsnes v063r01 release.
I've had enough of idiots incapable of finding fullscreen settings.
The menubar is enabled in fullscreen mode by default. A new option in
settings->configuration->video will let you hide it as with v063
official. I don't want to hear about how I shouldn't allow any
settings to be configured differently in fullscreen mode, or how it
should be in a GUI panel, or whatever. I will ignore you if you bring
it up.

I've also added the strpos / qstrpos function->class code, as
mentioned in the programming section.
2010-03-29 17:41:11 +00:00
byuu
27c24bc8a6 Update to bsnes v063 release.
Time for another (hopefully) stable release. The changelog has all updates since the last stable release.
Most notably, this release features substantial accuracy improvements all around. Almost all of them represent brand new findings never before seen in any SNES emulator.
Changelog:
    - fixed off-by-one buffer size issue in S-PPU RTO calculations [PiCiJi]
    - added XML parser
    - added XML-based memory mapping system
    - moved header-based memory mapping code into snesreader library
    - added some linker flags for Fedora [belegdol]
    - added cheat code database; with codes for over 1,500 games [mightymo]
    - fixed a bug where S-CPU IRQs were being tested one cycle early on direct page indexed read opcodes
    - added global cheat system enable/disable checkbox to cheat code editor
    - fixed bug in overflow calculation of S-CPU ADC and SBC opcodes in BCD mode [blargg]
    - emulated the S-CPU ALU MUL and DIV hardware delays with partial result calculation steps [blargg]
    - controller port read now returns real-time results of B button when strobe latch is raised
    - major improvements to emulation of the S-SMP TEST register [blargg, byuu]
    - fixed DSP2 memory map [Overload]
    - "Apply Patch" checkbox will now scan UPS patch folder if one is set in the paths section
    - fixed S-CPU TSC negative flag calculation in emulation mode [address]
    - added "make uninstall" command to Makefile for Linux users
    - S-CPU (H)DMA now updates the S-CPU MDR; fixes a freeze in Speedy Gonzales - Stage 6-1
    - very substantial code cleanups and optimizations as a result of moving from C++98 to C++0x
2010-03-28 15:46:44 +00:00
byuu
fac95dfec5 Update to bsnes v062r10 release.
Added make uninstall, and fixed up nall::function to also bind lambdas
that don't yet exist in GCC 4.4.

Spent most of tonight rewriting the standalone UPS patcher.
2010-03-24 14:19:38 +00:00
byuu
362542924e Update to bsnes v062r09 release.
Mostly minor stuff again.

Fixes:
array, linear_vector and pointer_vector need to set source.pool = 0
before calling reset() to avoid destroying the object we're trying to
move.
All of nall::string is inside namespace nall now. No idea what I was
trying to do before with the half-global approach.
nall::function gains a reset() function, more obvious than func =
(void*)0;
The movie file loader wasn't binding the right action when changing
files and clicking load, can't believe nobody noticed that one.
2010-03-23 12:12:10 +00:00
byuu
4179282244 Update to bsnes v062r08 release.
This WIP has bsnes.exe, snesreader.dll, and src/. If you need anything
else, get it from past releases, please.

I fixed TSC negative flag calculation in emulation mode. Will pass
this test now:
http://blargg.parodius.com/snes-tests/snes_test_tsc.zip

_Way_ too obscure to affect anything, but definitely good to get it
right.

Also rewrote nall/function.hpp to use C++0x variadic templates. New
version is ~85 lines instead of ~190, 40% smaller, doesn't require
recursively including itself, doesn't require the C preprocessor,
evaluates to ensure the member function pointer is big enough to hold
what you're assigning statically (at compile time) instead of
dynamically (at run time), and supports infinite arguments instead of
zero to eight now.
2010-03-21 07:36:46 +00:00
byuu
02820ef2e9 Update to bsnes v062r07 release.
This is source code only, no binaries. Sorry, worn out after spending
four hours straight writing crazy ass Julian<>Gregorian date
functions. Holy fucking hell that is crazy shit. Tell me, how many
days have passed since 01-01-4731 BC on the Julian calendar?

Okay, this really was just about taking advantage of vectors inside of
vectors. I've updated the XML parser to use vectors of actual objects
instead of pointers. This makes cleanup free, and turns countless ->'s
into .'s -- much nicer to look at. I may take advantage of overloaded
operators for something now, not sure yet.
2010-03-19 12:50:55 +00:00
byuu
0ecce7b93d Update to bsnes v062r06 release.
You'll need snesreader's DLL from my last WIP post to use the above.

This initializes mode, region and ram_size again in Cartridge::load()
to stop the phantom SRAM files from being generated.
This fixes DSP-2 mapping to match Overload's findings (which requires
an unposted snesreader, so Dungeon Master won't run for you guys yet.)
This removes nall/traits.hpp and uses std::tr1::type_traits instead.
It also drops move, forward and identity in favor of those from
std::tr1::utility*.
This fixes linear_vector and pointer_vector to not crash when using
vectors of vectors and copying them.
This fixed linear_vector, pointer_vector and array to initialize all
internal variables for all constructors.
This fixes the file browser to look for patches in your patch
directory, so the "Apply Patch" box should work correctly now.

* I have no objection to using functions from the C++ standard library
when they don't suck.
2010-03-18 15:32:55 +00:00
byuu
f94fcd6f30 Update to bsnes v062r05 release.
To run this, you'll need the DLLs from v062r04's public beta, and the
updated snesreader.dll in the same folder as the WIP. No profiling.

This fixes UPS patching, and it also modifies snesreader to generate
the XML map separately, so that the map can be generated post-
patching.
The new enum classes weren't attaching properly to the config file, so
the input settings, expansion port and region settings are saved
again.
It also converts the S-SMP timers back to unsigned integers instead of
using floating point, no accuracy improvement but much more in line
with hardware.
Lastly, it makes the div register shift left 16 places and pre-shifts
on divide, which is just for aesthetics.

And I'll wait on your tests, FitzRoy. I really hope that Big Run
Jaleco Rally is correct, because I don't have the first idea how to
debug that one. Speedy I can probably handle.
2010-03-17 12:58:18 +00:00
byuu
57f903630a Update to bsnes v062r04 release.
I suppose I should start calling these nightlies, heh. blargg went ahead and verified every last possible edge case with regards to the S-CPU MUL / DIV registers. It uncovered a few errors in my implementation, which have since been corrected. The design used now should be a direct reflection of the hardware implementation: no actual multiplication, no actual division, and no variable-length bit-shifting.
We also spent about eight hours straight hammering away at the S-SMP test register. We have a partial understanding of TEST.d3 and TEST.d0, and a complete understanding of the other six bits. All of this has been implemented as well.
Lastly, snesreader gets a tiny update to fix Test Drive II, which broke due to a slight regression when porting the mapping code to XML.
2010-03-15 23:24:58 +00:00
byuu
9329de0a8d Update to bsnes v062r03 release.
blargg and I sat around for a good 8+ hours today hacking away at the
S-SMP Pandora's Box: the TEST register. What better way to spend Pi
Day, right?

We came up with the following tests:
http://byuusan.kuro-hitsuji.net/blargg_2010-03-14.zip

First, controller_strobebehavior.smc improves emulation of $4016. When
the joypad strobe latch = 1, reading $4016 returns the current value
of the B button. As in, you can keep reading it over and over. It
won't increment the shift register, and it will keep telling you the
actual current state of the button. This is very much like the NES
behavior. One more TODO in the S-CPU code taken care of.

Next, all kinds of S-SMP TEST register improvements. Turns out d7-d6
alone controls the actual S-SMP clock rate. 0 = 100%, 1 = 50%, 2 = 0%
(locks the S-SMP forever), 3 = 10%. Wild stuff, you can actually
permanently slow the S-SMP relative to the S-CPU.

d6-d5 is a timer tick control, but it actually uses d7-d4 overlaid.
The algorithm is fucking nuts, and is really my only contribution to
today's work. The rest was all blargg's research.

We had d2 wrong, it's not MMIO disable, it's RAM disable. As in,
disable read and write. Returns 0x5a on regular SNES, 0xff on mini-
SNES. 0x5a is not the S-SMP MDR. IPLROM is still readable when RAM is
disabled. d1 was correct, just RAM write disable. Can still write to
$f8 and $f9, of course. But it won't go through to RAM.

d3 and d0, we are still a little unsure on. The T0-T2 timers seem to
have a low and high phase, and if you strobe them you can force ticks
of stage 2 to happen, and you can disable them in such a manner than
stage 2 never ticks at all.

blargg is still uncovering all sorts of crazy things in $xB mode, so
emulation of these two bits is not perfect.

But overall we are leaps and bounds further now toward complete
emulation. I'd say we went from 10% to 80% with today's work. But
we'll have to see how deep the rabbit hole goes on d3+d0 first.

Current register map:

    case 0xf0: {  //TEST
    if(regs.p.p) break;  //writes only valid when P flag is clear

    status.clock_speed     = (data >> 6) & 3;  //100%, 50%, 0%, 10%
    status.timer_speed     = (data >> 4) & 3;  //100%, ...
    status.timers_enabled  = data & 0x08;
    status.ram_disabled    = data & 0x04;
    status.ram_writable    = data & 0x02;
    status.timers_disabled = data & 0x01;

    unsigned base = 1 + (1 << status.clock_speed);
    unsigned step = base + (15 >> (3 - status.timer_speed));
    status.timer_step = 1.0 / (3.0 / step);

    t0.sync_stage1();
    t1.sync_stage1();
    t2.sync_stage1();
    } break;


Fairly confident that no emulator prior to this WIP could pass any of
blargg's tests, so this is all brand new information. Fun stuff :)
2010-03-15 15:20:52 +00:00
byuu
989648c21c Update to bsnes v062 release.
Major accuracy improvements have happened over the past few days. They easily warrant a new beta release.
First, it turns out that every emulator to date; not only for the SNES, but for the Apple II GS as well, incorrectly computed ADC (add) and SBC (subtract) flags in BCD (binary-coded decimal) mode. At least fifteen years of emulating the 65816 processor, at least five known investigations into their behavior, and we all still had it wrong.
So I wrote some tests that dumped every possible combination of adc and sbc with every possible input and every possible flag, and recorded both the accumulator result and status flag register. From here, blargg figured out the underlying trick: the CPU was computing overflow before the top-nibble's BCD correction pass. With the routines rewritten, bsnes perfectly matches real hardware now.
Next, some background. The whole reason I got into SNES emulation was because I was tired of writing code that ran perfectly fine on emulators, but failed miserably on real hardware. The number one problem was emulators allowing video RAM to be written while the screen was being rendered. This single bug has broken dozens of fan translations and ROM hacks. Some have been updated to work around this bug, and many others are left in a permanently broken state (such as the translations of Dragon Quest I & II and Sailor Moon: Another Story, to name just two.) After asking emulator authors to fix this since 1997, I finally had enough in 2004 and started on bsnes. For this particular bug, I'm very happy to report that all but one SNES emulator now properly blocks these invalid accesses. Although sadly one still offers a configuration setting for backwards compatibility with these translations. What an ironic shame ... emulating an emulator. And in the process, sapping the motivation to ever go back and fix these 
titles to ever run on real hardware. But I digress ...
The second biggest problem that causes software created under emulation to break on real hardware has, without a doubt, been the hardware delays as the S-CPU computes MUL (multiplication) and DIV (division) results. To date, whenever you used this hardware functionality, emulators have immmediately furnished the correct results. But on real hardware, multiplication requires eight CPU cycles, and division requires sixteen. Each step computes one bit of the source operand and updates the results. Reading the output registers early thus provides the partially computed results.
This is obscure. It isn't well known, and many people writing software for the SNES probably aren't even aware of this limitation. Because of the partial computation results, outright delaying the computation would break many commercial software titles. But by not emulating the delay at all, we were causing a great disservice to anyone wishing to use an emulator for development purposes.
Now, once again, thanks to blargg's algorithm help, he has determined the underlying multiplication and division algorithms. Combined with my expertise of SNES analysis and hardware testing, I was able to determine when and how the ALU (arithmetic logic unit) stepped through each work cycle. Our work combined, bsnes now also perfectly emulates the hardware MUL and DIV delays.
Again, this isn't going to fix commercial software titles. They would have realized that they were reading back invalid MUL and DIV values, and fixed their code. This is for all of the software developed using emulators. This is an extension of my commitment to create a hardware emulator, and not a video game emulator.
We also verified that the S-PPU multiplication interface does indeed return instant results with no delay. So emulation of that interface was already correct.
I'm only labelling this release a beta because it hasn't been tested. But I'm fairly confident that it is stable, and I seriously recommend upgrading from v060 or prior releases. This is easily one of the last major pieces missing from emulation.
The last notable elements are: S-CPU auto joypad poll timing, S-CPUr1 HDMA crash detection, S-CPU<>S-SMP port ORing, S-SMP timer glitching, S-DSP mute pulse, and full cycle-level emulation of the S-PPU. With all of the aforementioned items, I will consider a v1.0 release of bsnes ;)
Lastly, I'll post this screenshot just for fun. When d4s translated Breath of Fire II to German, he added some code that relies on the incorrect emulation of the DIV register to detect emulators. With this emulated properly, you now see the following screen:
./sshots/bs_349.png
Sorry to spoil that, but the secret's already out, as the MESS team reported on it publicly already.
I intend to add pseudo-randomness support shortly, which should eliminate one of the last vectors possible to distinguish bsnes from real hardware :)
A million thanks to blargg for making this release possible.
2010-03-13 23:48:54 +00:00
byuu
0f0dcf9538 Update to bsnes v061r03 release.
This is probably the biggest accuracy fix in several years.

Thanks to the efforts of blargg and myself, bsnes is now the very
first emulator to properly emulate ALU multiplication delays. It's
100% bit-perfect.

Note that we don't yet know the underlying division algorithm. So in
this WIP, I just make it wait eight ticks before storing the results.
It _may_ cause some issues, but I wanted to get rid of the
status.alu_lock and config.alu_mul/div_delay garbage in advance.

I'm absolutely enthralled, I never thought I'd actually see this
emulated properly.
2010-03-13 15:40:21 +00:00
byuu
78e1a5b067 Update to bsnes v061r02 release.
Complete rewrite of adc + sbc opcodes, should fix:
- adc BCD overflow flag
- sbc BCD overflow flag
- sbc BCD invalid input value

Testing is appreciated, I believe Sim Earth is probably the most
likely to observe any difference.
2010-03-13 15:40:21 +00:00
byuu
79404ec523 Update to bsnes v061r01 release.
Found the cause of the issue breaking SuperFX games after loading SA-1 games. Seems the XML mapping tree wasn't being cleared. It's also not a good idea to use bsnes/ as the folder name when the Makefile generates a binary by the same name in the same directory, so back to src/ for the main emulator it is.
With those fixes, this release should be fully stable; but again my intentions are to keep v060 as the stable release for a while.
Nonetheless, you can grab the new beta at Google Code. It should be the last update for at least a few weeks.
2010-03-08 21:04:20 +00:00
byuu
6c59a2f1b4 Update to bsnes v061 release.
Please keep in mind that bsnes v060 remains the current stable release. v061 has been released as a work-in-progress build. As such, it is only available at Google Code.
I am releasing this WIP to allow the public to test out and comment on the new XML mapping system, as well as the integration of mightymo's cheat code database into the cheat editor. I would greatly appreciate feedback on these two on the forums.
There are some important issues with this release. The biggest is the move to C++0x. This requires GCC 4.4.0 or newer to compile, thus it is not currently possible to build this on OS X using Xcode. Nor would it be possible on certain BSDs or older distros. If you have an older compiler, please stick with v060, or use a binary release where available.
Another issue is that TDM/GCC 4.4.1 for Windows crashes with an internal compiler error when attempting to generate a profile for the DSP-1 module. This is a bug in the compiler, and not in the code itself. The workaround is to simply omit profile-guided optimization for this one object.
Lastly, there's also a known bug in the memory mapping. If you load an SA-1 game, SuperFX games will not load properly afterward unless you restart the emulator. I'm looking into the cause now, but it didn't seem serious enough to hold up a WIP release.
So, yes. If you want a good gaming experience that's been fully tested and stable, please stick with v060. If you want to see some bleeding edge features, I'd appreciate feedback on v061. Thanks for reading this.
Changelog:
    - added mightymo's cheat code database, access via "Find Cheat Codes" button on cheat editor window
    - added an option to temporarily disable all cheat codes quickly
    - debugger now properly uses S-SMP IPLROM when needed for disassembling and tracing
    - indexed indirect read opcodes in the S-CPU were testing for IRQs one cycle too early [someone42]
    - fix an off-by-one array iteration in S-PPU OAM rendering [PiCiJi]
    - added some implicit linked libraries to linker flags for Fedora [belegdol]
    - moved from C++98 to C++0x, resulting in substantial code cleanups and simplifications
    - C++0x: implemented foreach() concept for linear container iteration
    - C++0x: implemented concept system using SFINAE and type traits
    - C++0x: utilized auto keyword to increase source readability
    - C++0x: moved to strongly-typed enumerators
    - C++0x: rewrote va_list-based code to use type-safe variadic templates
    - C++0x: replaced noncopyable class with deleted default copy functions
    - C++0x: replaced custom static_assert template class with built-in version
    - C++0x: utilized rvalue references to implement move semantics into string, array, vector and serialization classes
    - C++0x: utilized std::initializer_list for { ... } initialization support to lstring, array and vector classes
2010-03-07 02:17:46 +00:00
byuu
a295c86c05 Update to bsnes v060r12 release.
Added concept support, vastly improved foreach to handle break
properly and only compute the size once (based off concepts), extended
it to work QList, and updated cheateditor.cpp to use foreach
everywhere now.

Added an "Enable Cheat Engine" checkbox to the bottom left of the
cheat editor window with a tooltip to help explain it more. It
essentially simulates the switch on the Game Genie. A way to quickly
toggle all codes on and off, without having to check/uncheck each one
individually. Useful for the codes that lock up games between levels
and such. It's bound to the existing keyboard shortcut that did this,
and they both update the check state and system status properly.
Hopefully the GUI option will make more people aware of this
functionality.

Updated array, linear_vector, pointer_vector and lstring to support
std::initializer_list constructors. This allows:
lstring list = { "apple", "strawberry", 3.4, -27, true,
QString("why?") };
array<int> = { 3, 4, 9, 2 };

std::initializer_list is a pain in the pass, it lacks a subscript
operator, an at() function and a get() function. Forced to use
constant iterators to read out the contents.

[No archive available]
2010-03-06 08:11:35 +00:00
byuu
a539f2f578 Update to bsnes v060r10 release.
Fuck, adding #include <iostream> grows the Windows binary by 300KB
pre-UPX, and 100KB post-UPX. And I'm only using std::cout to avoid the
very last call to printf(). I may just say fuck it and stick with
stdio.h instead.

Nothing really big in this one.

Added "Select All" + "Clear All" buttons to the cheat finder
Added move semantics to dictionary, array, linear_vector and
pointer_vector
Killed class noncopyable and replaced it with proper class(const
class&) = delete; (inheriting noncopyable makes some classes non-POD)
Added type-safe variadic sprint() and print() functions, which are
designed to replace sprintf() and printf(), which I only use for bug-
testing anyway
Couple other small things like that

[No archive available]
2010-03-03 07:00:13 +00:00
byuu
e710259611 Update to bsnes v060r09 release.
This release parses the 1.3MB cheats.xml file about 960x faster than
the last release, no exaggeration at all there. The tiny 5-10ms lag to
search now is probably more due to Qt than anything else. It also
won't eat up an extra 40MB of RAM, instead only using about 100KB now.

So yeah, please give it a try and let me know what you think of the
new cheat lookup system.

Aside from that, I fixed a tiny S-CPU typo bug where the IRQs were
being tested one cycle too early in op dp,x and op dp,y opcodes.

I also redid a bit of nall in C++0x. Most importantly, I've added move
semantics to nall::string, which should cut out ~20% of the memory
allocations bsnes needed before. I really wanted to write a variadic
template string::printf replacement, but I couldn't come up with a
syntax I liked, and I didn't want to write a sprintf clone because
that takes forever and is ugly. So I just said fuck it, removed
string::printf (and with it the very last vestige of va_list in all of
my code, good riddance), and updated the str* functions to take
template arguments to specify padding length and character. Both
optional, another fun C++0x only thing - default function template
arguments.

Before: string foo = string::printf("%.4x", variable);  -- went
through raw sprintf(), va_list, and had a limited 4k buffer
After: string foo = strhex<4>(variable); -- manually built by hand, no
buffer issues

nall/utility.hpp got my own copies of std::move and std::forward. I
have no problem using the std:: ones, but the <move> header seems to
be missing, and I already have my own traits library, so that was easy
enough for now. Added a move-semantic swap as well. Using nall::sort
on an array of nall::string objects should be almost as fast as
sorting integers now.

The cheat code editor .. whenever you import into a new slot, or clear
that slot, it will uncheck the box now as well.

[No archive available]
2010-03-02 07:47:07 +00:00
byuu
f1d1ab7ed1 Update to bsnes v060r08 release.
This version embeds mightymo's cheats.xml inside the bsnes executable.
It's about 1.3MB, but thankfully Qt compresses it heavily first, so
the binary only grows by 100kb. BZip2 doesn't fare as well,
surprisingly, and grows the source archive by 200kb. I think it's
worth it.

The cheat code editor window gets a new button, "Find Cheat Codes ..."
If you click it, it will match the SHA256 of the currently loaded game
to an entry in the database. No matches? It apologizes for letting you
down. But if it finds some, and there's a good chance it will with
~1500 entries, it gives you a list of them. Check the codes you want
and they are imported into the available slots. The way it works is
the first checked code goes to the first empty slot, the second
checked code to the second empty slot, and if there aren't any slots
left available (very unlikely), it won't import them.

It's incredible, actual innovation in the SNES scene.
- no more web searching for codes
- no more applying codes for the wrong revision, or the wrong country,
or whatever
- no more flat out broken codes
- no more having to name the codes yourself
- cheat grouping avoids the need to add and toggle multiple slots to
get a single effect

Anyone who likes this, please send a thank you PM to mightymo77 and
tukuyomi. They deserve all the credit for the amazing database that
makes this possible.

Now then: **major caveat, for the love of god read this first!** My
XML parser is ... brutal on this file. It has to allocate memory for
each attribute and each element. And ... it rapes the ever loving SHIT
out of malloc(). Oh my god. On my E8400, it takes a good 30 seconds to
parse the 1.3MB database on Linux. And on Windows, holy god, it has a
horrendous version of malloc. It takes at least 3-5 minutes.
Seriously, go make yourself a cup of coffee if you are running
Windows.

I only have to parse the file one time per program run, and I only
parse it when you click the find cheat codes button for the first
time. But yes, it is painful. Very, very painful.

[No archive available]
2010-03-01 05:59:52 +00:00
byuu
1934197fb7 Update to bsnes v060r07 release.
Feeling amazing tonight. The low of fighting a bad cold for the past
week, blocked nose, bloody lips and wrist pain combined can't hold me
down.

Two years of searching and I finally found the Midnight Panic EP, and
it's amazing. And from this WIP forward, bsnes now uses C++0x instead
of C++03. I feel like I've been given this new amazing language, and
there's all these wonderful new possibilities for cleaning up and
simplifying code.

foreach is the most amazing concept. The only reason I've made it this
long without it is because I never got to use it. You will pry this
one from my cold, dead hands. Already applied it to the cartridge and
memory classes. It's insane.

Before:
    for(unsigned i = 0; i < memory::wram.size(); i++) memory::wram[i]
    = config.cpu.wram_init_value;
    for(unsigned i = 0; i < cartridge.mapping.size(); i++) {
    Cartridge::Mapping &m = cartridge.mapping[i];


After:
    foreach(n, memory::wram) n = config.cpu.wram_init_value;
    foreach(m, cartridge.mapping) {


Before:
    for(unsigned i = 0; i < 32; i++) {
    char value[4];
    sprintf(value, "%.2x", shahash[i]);
    strcat(hash, value);
    }


After:
    foreach(n, shahash) hash << string::printf("%.2x", n);


And that's just the first thing! So many things I can do now. Can't
wait to come up with uses for all the new features to simplify code
even more.
- auto type inheritance
- variadic templates to nuke the last vestiges of va_list and its
associated horrors
- strongly typed enums (no more enum Mode { ModeOfRedundancyMode }
shit. enum class Mode : unsigned { Normal, BSX };
- _real_ static assertions with actual error messages instead of 40
pages of template errors
- default templates parameters to template functions (but still no
function partial template specialization, grrr)
- property class can be implemented natively without having to trick
GCC into using template friend classes
- rvalue references will allow my string class and such to implement
move semantics, no more useless copying
- uniform list initializers, lstring foo = { "a", "b", "c", ... };

And that's just what's there now, it's only half-way done. The
completed support will be even more awesome:
- lambda functions
- nullptr
- class variable initialization in the header instead of needing
constructors
- native functors to replace nall::function with
- string literals in UTF-8
- native multi-threading support
- and so much more

[No archive available]
2010-02-28 08:37:56 +00:00
byuu
e1c8757a10 Update to bsnes v060r06 release.
Completely rewrote the syntax for all XML parsing, took over five
hours of nonstop work, holy fuck.

Sadly the expanded syntax greatly increases the parser complexity, the
SNES::Cartridge class is twice as big now, XML parsing for all special
chips takes up 20KB of space.

Example:
    void Cartridge::xml_parse_sdd1(xml_element *root) {
    has_sdd1 = true;

    foreach_element(node, root) {
    if(node->name == "mcu") {
    foreach_element(leaf, node) {
    if(leaf->name == "map") {
    Mapping m((Memory&)sdd1);
    foreach_attribute(attr, leaf) {
    if(attr->name == "address") xml_parse_address(m, attr->content);
    }
    mapping.add(m);
    }
    }
    } else if(node->name == "mmio") {
    foreach_element(leaf, node) {
    if(leaf->name == "map") {
    Mapping m((MMIO&)sdd1);
    foreach_attribute(attr, leaf) {
    if(attr->name == "address") xml_parse_address(m, attr->content);
    }
    mapping.add(m);
    }
    }
    }
    }
    }


Of course, C++ doesn't have foreach(), that'd be too goddamned
convenient, right? So behold the spawn of satan himself:

    #define concat_(x, y) x ## y
    #define concat(x, y) concat_(x, y)

    #define foreach_element(iter, object) \
    unsigned concat(counter, __LINE__) = 0; \
    xml_element* iter; \
    while(concat(counter, __LINE__) < object->element.size() \
    && (iter = object->element[concat(counter, __LINE__)++]) != 0)

    #define foreach_attribute(iter, object) \
    unsigned concat(counter, __LINE__) = 0; \
    xml_attribute* iter; \
    while(concat(counter, __LINE__) < object->attribute.size() \
    && (iter = object->attribute[concat(counter, __LINE__)++]) != 0)

[No archive available]
2010-02-27 10:04:33 +00:00
byuu
768e9b589d Update to bsnes v060r05 release.
Forgot the -lXext thing, saw it when posting. It'll be in r06.

Updated the XML parser, will reject a lot more invalid stuff, and
it'll parse comments, <? and CDATA stuff. I haven't seen PCDATA
mentioned anywhere in the spec, so fuck that for now.

Went back to using offset= for SPC7110 data ROM. Thinking about it
more, using offset= allows you to put the data ROM anywhere in the
file, even before the program ROM. size= forces it to go at the end no
matter what. Now, ideally, you want to define both, but offset= should
be more important.

[No archive available]
2010-02-25 05:00:34 +00:00
byuu
582f17b330 Update to bsnes v060r04 release.
I wrote a dedicated XML parser for nall::string, and updated
SNES::cartridge to use that instead of the ad-hoc implementation. It's
still not W3C-quality with 100% standards-adherence, but it's at least
an order of magnitude better now.

The parser supports infinitely nested elements and attributes via
pointers to child nodes, supports both single-tag <eg /> and tag-with
content <eg>content</eg>, and properly handles and validates the
<?xml?> header.

It doesn't fully ignore comments yet, but you should be okay anyway.
Whitespace culling, especially inside tags, still needs a bit of work.
It will properly reject the entire document if there are unopened /
unclosed tags now.

All in all though, it's very small. Only 3KB for the whole parser.
Usage example:

    void Cartridge::parse_xml_cartridge(const char *data) {
    xml_element *document = xml_parse(data);
    if(document == 0) return;

    for(unsigned i = 0; i < document->element.size(); i++) {
    xml_element *head = document->element[i];
    if(head->name == "cartridge") {
    for(unsigned n = 0; n < head->attribute.size(); n++) {
    xml_attribute *attr = head->attribute[n];
    if(attr->name == "region") {
    if(attr->content == "NTSC") region = NTSC;
    else if(attr->content == "PAL") region = PAL;
    } else if(attr->name == "ram") {
    ram_size = strhex(attr->content);
    }
    }

    for(unsigned n = 0; n < head->element.size(); n++) {
    xml_element *node = head->element[n];
    if(node->name == "map") {
    parse_xml_map_tag(node);
    }
    }

    break;
    }
    }

    delete document;
    }


Also updated DSP-3 and DSP-4 to separate ::DR and ::SR, SPC7110 uses
size= for program ROM size calculation now (makes more sense than
using offset=), added PCB info to BS-X, Sufami Turbo and Game Boy
cartridges to give additional meta-data (SGB emulation will properly
size RAM / RTC files again), and updated snesreader with these
changes.

And for better or worse, I made the vector classes copyable. Not
actually used by anything at the moment. I wanted to do:
struct xml_element {
vector<xml_element> element;
};

But obviously that causes an infinite recursion when the vector's copy
constructor is called, hence why I had to use pointers.

[No archive available]
2010-02-23 08:21:20 +00:00
byuu
23866a348d Update to bsnes v060r03 release.
Okay, this should get 100% compatibility back up again. All special
chips map via XML, and I also support BS-X, ST and SGB games again.
Only regression is that SGB currently forces on SRAM size to 128KB for
each loaded game. I need to move that into snesreader, and hook it
into the cartridge interface. Too much work to do it tonight, but in
time ...

Given the extensiveness of this, heavy testing appreciated. Let me
know if you spot any broken titles please.

[No archive available]
2010-02-22 09:33:13 +00:00
byuu
d0de306546 Update to bsnes v060r02 release.
This one is not for the faint of heart.

All header detection code has been removed from the official bsnes
binary. It can now only load games with a valid XML memory mapping
file. If you have /path/to/zelda.sfc, then you also need
/path/to/zelda.xml that describes how to load the cartridge.

The 'ext' archive above contains a new version of snesreader, as well
as its DLL. snesreader now contains header detection, as well as XML
mapping generation. If you have snesreader, and no XML file,
snesreader will create one for you. It won't store it on your hard
disk, it'll only be in memory. An XML on the hard disk always
overrides the snesreader's auto-generated XML file.

So far, only normal ROMs, S-RTC, S-DD1 and SPC7110 games are up and
running. Everything else is broken, I'll have to fix them one by one
by extending the id= attributes in the XML parser.

Here's some example XML files:

    <?xml version="1.0" encoding="UTF-8"?>
    <cartridge ram="2000">
    <title>The Legend of Zelda - A Link to the Past</title>
    <pcb>SHVC-1A3M-30</pcb>
    <map mode="Linear" address="00-7f:8000-ffff" id="ROM"/>
    <map mode="Linear" address="70-7f:0000-7fff" id="RAM"/>
    <map mode="Linear" address="80-ff:8000-ffff" id="ROM"/>
    <map mode="Linear" address="f0-ff:0000-7fff" id="RAM"/>
    </cartridge>


    <?xml version="1.0" encoding="UTF-8"?>
    <cartridge region="NTSC" ram="2000">
    <map mode="Direct" address="00-3f:4800-483f" id="SPC7110::MMIO"/>
    <map mode="Direct" address="80-bf:4800-483f" id="SPC7110::MMIO"/>

    <map mode="Direct" address="00-3f:4840-4842" id="SPC7110::RTC"/>
    <map mode="Direct" address="80-bf:4840-4842" id="SPC7110::RTC"/>

    <map mode="Linear" address="00:6000-7fff" id="SPC7110::RAM"/>
    <map mode="Linear" address="30:6000-7fff" id="SPC7110::RAM"/>

    <map mode="Shadow" address="00-0f:8000-ffff" id="ROM"/>
    <map mode="Shadow" address="80-8f:8000-ffff" id="ROM"/>

    <map mode="Direct" address="50:0000-ffff" id="SPC7110::DCU"/>
    <map mode="Linear" address="c0-cf:0000-ffff" id="ROM"/>
    <map mode="Direct" address="d0-ff:0000-ffff" id="SPC7110::MCU"/>
    </cartridge>

[No archive available]
2010-02-21 00:27:46 +00:00
byuu
2af60d0a13 Update to bsnes v060r01 release.
This WIP fixes the S-PPU overflow issue mentioned by PiCiJi. It won't
cause any difference in terms of accuracy, for reasons I explained
earlier the effect was transparent, but it's good to do things the
right way.

It also adds a new ExSPC7110 memory mapping mode that allows for a 2MB
program ROM. This is an absolute necessity for the Far East of Eden
Zero translation.

[No archive available]
2010-02-15 02:05:28 +00:00
byuu
a8263afc24 Update to bsnes v060 release.
This is a long-term stable release. A full changelog will be available at the forum link below later in the day. Also, please note that I have merged all of the various distributions into two packages. The Windows binary package now contains both the profile-optimized (fast) build, and the debugger build. The source code package now contains sources for bsnes, snesreader, snesfilter and supergameboy.
Changelog:
    - added Direct3D HLSL pixel shader support [mudlord]
    - fixed a signal issue that caused loading games to take 1-2 seconds longer in v059
    - 21fx API revised to its final form, S-MSU (public documentation pending)
    - worked around QTBUG-7188 to fix multi-file 7-zip file listbox to update when scrolling
    - added scale max - normal, wide, and wide zoom modes to fullscreen mode
    - added overscan cropping tool (needed for wide zoom mode; useful for developers simulating games on a real TV)
    - added "go up one folder" button to file load dialog
    - added group (un)assignment to the input settings window
    - now honors input.allowInvalidInput setting; defaults to false [Jonas Quinn]
    - cheat code editor grays out empty slots
    - cheat code editor adds "clear selected" button to quickly erase multiple cheat codes
    - to load folders as game images, folders must end in .sfc, .bs, .st, .gb now
    - debugger: added S-CPU (H)DMA registers; S-SMP registers; S-DSP registers to properties list
    - snesfilter: HQ2x filter is now multi-threaded (scales infinitely: the more cores you have, the less overhead required)
    - pixelshaders: added screen curvature shader to simulate curved CRT tubes
    - source: lots of code cleanup, as always
2010-02-09 00:58:03 +00:00
byuu
a9943ab4f4 Update to bsnes v059r07 release.
Fun WIP, lots of work put into this one.

First, I added .st, .bs, .gb, .sgb, .gbc folder-based loading. Works
the same as .sfc folders. So far, only .st shows additional preview
info (just the ROM size for now), but the base code is in place to
specialize .bs / .st / .(s)gb(c) cartridges next.

Next, I added overscan configuration settings to the video settings
window. The reason for this is twofold:
1. testing your translation / hack without a real TV, you can set
overscan to 6% in all directions to ensure all the text is onscreen
2. for the smart video scale mode, noted below
Now, when in fullscreen mode, you get three additional scale settings:
Scale Max - Normal (keeps aspect ratio, maxes out height)
Scale Max - Fill (fills as much as the screen as possible, no
cropping)
Scale Max - Smart (splits the crop and aspect ratio distortion, 50/50
on each; try it, it looks fairly decent in most titles)
No scale max - zoom, because that's just too much cropping; almost
nothing plays well with it

Note that cropping doesn't work so great right now for games that mix
lores and hires (Secret of Mana 2 textboxes, for instance.) I'm
working on it, but it's going to be very tough. All filters take solid
screen sizes quite well, which surprised me.

Also, scale max - smart is for widescreen monitors. It makes zero
sense to use it in portrait mode. I'll add some sort of special case,
just in case anyone crazy tries it, in a future build.

Lastly, I killed the separation of video.cpp and pixelshader.cpp, it's
all inside video.cpp now; and I cleaned up the object names in
video.cpp.

Scale Max - Smart + Curvature pixel shader + NTSC filter - R/F +
Scanlines - 70% is an incredible sight to behold. So much processing,
yet still easy to get 60fps with perfectly synchronized video and
audio. Add that with the Xbox 360 gamepad, throw in a nice S-MSU CD-
quality soundtrack, and it's nirvana.

Please try out the Scale Max - Smart mode if you are using a
widescreen monitor and let me know what you think.

[No archive available]
2010-01-27 09:25:22 +00:00
byuu
46a1eb8cce Update to bsnes v059r06 release.
This is an experimental release, as such it is posted only to Google Code.
Changelog:
    - 21fx API moved to pre-finalized form as S-MSU1; more about this on the forum
    - OpenGL driver now uses GL_CLAMP_TO_BORDER instead of GL_CLAMP_TO_EDGE to support screen curvature shader
    - rewrote file open dialog; code is greatly simplified, interface is improved
    - all cheat code columns are now enquoted, and empty codes at the bottom of the file are omitted (format is compatible with previous releases still)
    - debugger: added missing DMA variables to S-CPU properties viewer
    - snesfilter: added OpenMP (multi-threading) support to HQ2x filter
    - lots of other miscellaneous code cleanup work
2010-01-24 23:21:38 +00:00
byuu
4517c0249f Update to bsnes v059r05 release.
Funny, much more effective changes but in a lot less time. The file
dialog is just a major pain in the ass, I guess. Had to sit and think
for at least two hours just to handle the differences between activate
(double-click an item) and accept (click accept button.) Eg if it's a
folder, double-clicking needs to go into the folder, but the accept
button needs to use that folder. But files act differently, load has
the open-folder thing that overrides the default entering of folders,
and saving doesn't have any such concept at all. Fun fun fun, but done
now.

libqb (QbWindow, QbCheckAction, QbRadioAction) is dead; DiskBrowser is
dead; HexEditor is dead. They've all been merged into nall/qt now.
nall/Makefile-qt goes to the more logical nall/qt/Makefile. The last
thing to do is export style sheet defaults into nall/qt to get the
spacing of the new file dialog under control.

Improved the save dialog, instead of putting the entire path in the
box, it only puts the non-directory part, and pulls the directory from
the file system mode's root path. I decided not to allow .. and /
commands inside the save text box. I just strip all that out. Go to
the damn folder you want to save in, sheesh. And before anyone
complains about that, note that bsnes doesn't even use the save dialog
mode :P

Still have to hook up the new folder button to an actual dialog,
haven't bothered yet. Since there's plenty of room with the extended
width, I'm just going to leave them both visible.

nall/qt/hex-editor is pretty much a direct port, no changes. But I
intend to make the height programmable, and fork that into a stand-
alone, super light-weight hex editor to replace bless (so that I can
remove Mono.) Same for check-action and radio-action, direct ports.

nall/qt/window is a bit different, binds the geometry outside the
constructor. This fixes some issues where certain windows weren't
saving their geometry properly, like the debugger properties window.
And I think there's some other advantage to it not needing a
complicated constructor, but I don't recall what at the moment.

Modified GL_CLAMP_TO_EDGE to GL_CLAMP_TO_BORDER, so everyone can try
out the curvature pixel shader now. Added it to my pixelshaders pack,
but I haven't uploaded a new pack yet, so get it from the other thread
for now.

I mainly need testing on the new file dialog stuff. Please let me know
if something strange is broken, other than the new folder button.
2010-01-18 16:25:02 +00:00
byuu
b538c13aad Update to bsnes v059r04 release.
Eight hours of non-stop work, for the sole purpose of trying to
separate the file browser underlying mechanics from the bsnes-specific
stuff.

So far, it's going quite well. 95% of the functionality is there with
only 25% of the code size. Forked the underlying stuff to
nall/qt/file-dialog.moc.hpp, which is now designed to support
open+save+folder selection natively. Save mode adds a text box to
enter your own file name, and folder mode hides the filter drop-down
and all files automatically. The top bar now spans 100% of the width.
I like it more this way. I also killed the tree view in favor of a
list view, for the sole reason that I really can't stand how when you
go up a folder and the deeper tree is still open. Since the
QFileSystemModel is asynchronous, I can't close the tree nodes when
navigating up.

The simplifications were needed because it was getting damned-near
impossible to edit that mess of a file (diskbrowser.cpp.) Compare to
filebrowser.cpp, much cleaner. Now I should be able to add open-folder
concept for BS-X, ST and SGB games much easier. And of course, I
should be able to offer the base QFileDialog as an option, too.

After that, I'll probably export the hex editor to a generic class,
and then export the Qb stuff (window geometry save/restore, stock
check / radio menu buttons.)

Also, I just wiped out Windows XP and put Windows 7 back, just to fix
the video tearing issue relating to DWM and ... it works perfectly
fine. Zero tearing, zero skipping, zero audio popping. All I did was
start bsnes v059.04, set audio sync to the usual 31960, and it was
just fine. What the hell are people complaining about, exactly?
2010-01-18 00:55:50 +00:00
byuu
d3d98f9f54 Update to bsnes v059r03 release.
For the emulator, I added some missing S-CPU variables to the
properties viewer: all eight DMA channel registers, and $420b/DMA
enable + $420c/HDMA enable. Should probably add the S-SMP timers in
the future.

Updated nall/Makefile-qt to take $(qtlibs) as input, eg qtlibs =
"QtCore QtGui QtOpenGL" and it does the rest to generate $(qtlib) and
$(qtinc) for you. Killed nall/Makefile::ifhas, as it was rather
stupid.

I tried to bind the CPU/SMP/PPU/DSP modules inside of SNES::System,
but it turned out to be a major pain in the ass. I'll have to plan
that a lot more before trying to do that. The ultimate goal would be
having the entire emulator inside class SNES, so that you can
instantiate multiple copies or whatever.

I also updated snesfilter with a nice treat. Inspired by DOLLS'
phosphor code, I added OpenMP support to the HQ2x filter. I have a
dual core E8400 @ 3GHz. With no filtering, I get 177fps. With HQ2x, I
get 123fps. With HQ2x+OpenMP, I get 143fps. Pegs both CPUs to 100%,
heh. And other open applications will interfere with speed, eg
Audacious drops it to 138fps.

Not bad overall though. It should scale even higher on quad cores. And
before anyone asks, no I can't add it to the NTSC filter. I'd have to
talk to blargg about that, and it's already faster than HQ2x anyway.
This is really more a test for things like
HQ3x/HQ4x/Phosphor3x/Phosphor5x in the future. Also, it only works on
Linux at the moment. Need libgomp and libpthread, which I don't have
on Windows.

ZSNES took the approach of putting the filter in another thread while
the next frame is emulated; whereas bsnes forks off new threads when
rendering is hit. I believe the latter is a better approach: it avoids
a 16-20ms latency penalty, it's much simpler, and it can scale up to
240 cores (instead of being limited to two.)

So yeah, I easily have the fastest, smallest, most definitive version
of HQ2x possible right now; so long as you have a quad core :)

[No archive available]
2010-01-12 06:13:14 +00:00
byuu
1d5e09ef07 Update to bsnes v059r02 release.
Changelog:
    - added folder-up button to the file loading window
    - hid new-folder button except on path selection window
    - removed "Assign Modifiers as Keys" button; replaced with input.modifierEnable in the configuration file
    - fixed a Qt signal issue that was causing ROM loading to take an extra second or two longer than necessary
    - scale 5x setting will now maintain an exact multiple in both width and height for both NTSC and PAL modes
    - re-added group assignment and unassignment to the input settings window
    - re-wrote mouse capture code to be more intuitive, now uses buttons to set assignment
    - re-added input.allowInvalidInput check to stop up+down and left+right key combinations by default [Jonas Quinn]
    - split "Tools Dialog" menu option into separate items for each tool (Cheat Editor, Cheat Finder, State Manager)
    - added S-SMP and S-DSP property information readouts to the debugger
2010-01-11 02:13:12 +00:00
byuu
97a3a28d86 Update to bsnes v059 release.
**Known issues:**
- button menus do not show up with Windows Vista/7 theme
- snesreader's multi-file archive dialog box doesn't redraw itself on
Windows when you choose different games

Windows Qt is buggy as always. Nothing we can do but keep waiting. I'm
also going to hold off on including pixel shaders until Direct3D PS
support is in. It's just going to annoy the 98% of users who can't use
them if I include them now. Yes, Windows OpenGL support is that bad.

Anyway, from v058 wip10, the following changes were made:
- cheat code editor grays out the slot#s when they are empty. I can't
put "Empty" in the text boxes for various reasons.
- added "Clear Selected" button and multi-selection support to cheat
editor. This is meant to quickly erase all slots.
- settings and tools windows start at 600x360 when bsnes.cfg is not
found / empty
- fixed the emulationSpeed section to start with input. instead of
config.
- open-folder concept requires the folders to end in .sfc to work now,
once again doesn't care what the ROM inside is named
(this is meant to mimic OS X .app folders)
- 21fx API extended to map to $2200, $2201 for now; mostly as a test
for A-bus access (21fx->VRAM DMA, etc)
(old $21fx registers remain for now)

I intend to release this on Saturday as-is even if a few small bugs
are reported. But if there's something major we can make another RC
build.
2010-01-07 13:07:56 +00:00
byuu
6ec765f2c4 Update to bsnes v058 release.
We've tested the latest release on at least a dozen computers now, all seems to be in order for a release.
Changelog:
    - added 21fx support (more on this later)
    - added movie recording and playback support
    - added rewind support (enable under Settings->Configuration->Advanced, use backspace key to rewind)
    - added speedup (fast forward) and slowdown key bindings
    - audio no longer stutters on Windows when moving or resizing the main window
    - co-processors can now specify their own clock rates instead of sharing the S-CPU clock rate
    - Super Game Boy 2 now runs at the correct hardware speed, and not 2.4% faster like the Super Game Boy 1 does
    - added Vsync support to the Windows OpenGL driver (Intel graphics drivers do not support this option, because their engineers are lazy)
    - OpenGL driver no longer re-initializes when changing video synchronization, helps pixel shaders
    - refactored user interface compilation; now split into several object files, auto-generated MOC files placed under src/obj/
    - worked around a bug in the PulseAudio sound server that was causing the ALSA output driver to lock up [BearOso]
    - rewrote and simplified the save state manager, it is no longer a part of the core
    - S-DD1 and SPC7110 can now access up to 256MB via their MMCs
    - re-added background and OAM layer toggling under the tools dialog
    - added config file options to adjust emulation speed levels (config.system.speed*)
    - added snesreader, snesfilter and supergameboy support to the OS X port
    - added a really neat pixel shader that can perform point scaling to non-even multiples, eg it looks great even with aspect correction [Fes]
    - upgraded to Qt 4.6.0 official
Debugger changelog:
    - added memory export and import to the memory editor
    - added bus usage analyzer: logs opcodes, memory reads, memory writes and M/X states to usage.bin file
    - added disassembler that can trace both forward and backward from the current execution address
    - extended read/write breakpoints to the S-SMP
    - re-added trace masking option
Errata: there is one known bug in Qt 4.6.0 that affects the Windows port: menus attached to buttons show up as invisible on Windows Vista and above. I only use this on the file load dialog options button, and only to toggle the information pane on and off. Given that this is less severe than the bugs in the beta versions, I've upgraded anyway. I'll submit a bug report to the Qt team for this shortly. Also, my sincerest thanks to Bradley Hughes from the Qt development team for quickly fixing this show-stopper bug that greatly affected performance in bsnes v056.
2009-12-09 13:34:03 +00:00
byuu
54c7b4692d Update to bsnes v057 release.
I'm really sorry about this, but a major issue snuck into v056. It was caused by a bug in the newly released Qt 4.6.0 RC1. Whenever one moved the mouse cursor over the main window in the Windows port, the frame rate was immediately cut in half, which effectively ruined Mouse, Super Scope and Justifier support. As for how this could happen, well ... I'm ... really at a loss for words about this.
This release does not change the source code at all except to increment the version number, and it is built against Qt 4.6.0 beta 1 instead of 4.6.0 release candidate 1 as v055 was.
I will file an official bug complaint and post a link to it here during next week. Again, my apologies for any inconvenience. I incorrectly assumed it would be safe to update to RC1, and didn't spot the bug in time.
2009-11-23 13:24:03 +00:00
byuu
66067f0015 Update to bsnes v056 release.
This release adds a lot of new user interface features, and polishes Super Game Boy support.
Note that many pixel shaders need to be coded specifically for bsnes, eg ones designed for Pete's OpenGL2 plugin will not work. I will maintain a pixelshaders archive on the bsnes download page with a collection of working shaders. Right now, there are three: HDR TV, Scale2x and HQ2x; written by guest(r) and Pete, and ported by myself.
Changelog:
    - lowered Game Boy audio volume so that it matches SNES audio volume
    - fixed Super Game Boy multi-player support
    - fixed Super Game Boy swapped player bug
    - compressed Game Boy cartridges can now be loaded
    - added save state support for Super Game Boy games
    - blocked illegal Super Game Boy packets, fixes Zelda DX, Akumajou Dracula, etc palette issues
    - main window once again shrinks on size changes
    - joypads can now control the file loading window (support is very rudimentary)
    - cleaned up video and audio sliders, increased audio input frequency range for 59hz monitors
    - rewrote all of the input capture system from scratch
    - added dozens of additional GUI hotkey bindings to resize the main window, control synchronization, control speed, etc
    - it is now possible to map keyboard modifiers (shift, control, alt, super) to any input or hotkey; eg alt+enter = fullscreen
    - merged all input capture windows into the main settings panel
    - added turbo button support; hold down turbo buttons to send a 30hz input pulse
    - added asciiPad controller emulation; contains off/turbo/auto fire toggles and slow-motion mode
    - asciiPad support allows for quick switching between keyboard and gamepad input
    - merged scanline filter into the user interface (under Video Settings) to allow it to work on all filters; including the NTSC filter
    - killed off an evil QString <> string intermediary class called utf8; string class can convert to and from QString directly now
    - added fast BS-X, Sufami Turbo and Game Boy cartridge loading: use the filter list under "Load Cartridge" to bypass the BIOS selection screen
    - added pixel shader support to the OpenGL driver on Windows and Linux; note that it only really works well on Linux at the moment
    - added proper Vsync support to the OpenGL driver on Windows and Linux using GL extensions; again this really only works well on Linux
    - added unique path memory for shaders, folders, cartridges, BS-X, Sufami Turbo and Game Boy images
    - upgraded to Qt 4.6.0 release candidate 1; fixes an issue with the first checkbox in lists not updating when clicked
2009-11-22 14:48:58 +00:00
byuu
4c66de6f27 Update to bsnes v055 release.
Happy Halloween, this release adds full Super Game Boy support ... but is it a trick, or a treat? ;) ::cough::, lameness aside ...
The Game Boy emulation core is courtesy of gambatte, and excellent, accuracy-focused, open source, and lightning fast Game Boy Color emulator. Now I know what you're thinking, using a Game Boy Color emulator with the Super Game Boy? The truth is, gambatte was just such an amazingly perfect fit that nothing else compared. I fully believe that even as a CGB emulator, gambatte will do a better job than any pure DMG emulator could.
The emulation of the ICD2 chip (aka the Super Game Boy) was fully reverse engineered by myself. Eventually I'll get an updated document put up explaining how it works.
The next question might be, "why emulate the Super Game Boy when existing Game Boy emulators do?"; well, they can only simulate part of the SGB. Features such as custom SNES sound effects, hand-drawn borders, multi-tap support and custom SNES code execution can only be accomplished by a true SNES emulator. Space Invaders is perhaps the most impressive demonstration, as it contains an entire SNES game embedded inside the Game Boy cartridge.
bsnes' SGB emulation supports virtually every command, full sound mixing from both the SNES and Game Boy sides, both BIOS revisions, etc. The only thing that is not fully functional yet is the multi-player support, but it should be in due time. Save state support is also planned for a later date.
Changelog:
    - added Super Game Boy emulation (thanks to gambatte for the Game Boy core)
    - extended hybrid scanline/cycle PPU renderer to support Mode7 register caching; fixes scanline flickering on NHL '94 title screen
    - all windows (other than the main window) can be closed with the escape key now
    - file dialog path selection now accepts typed paths; can be used to access hidden directories and network shares
    - file dialog's game information panel can now be disabled
    - fixed a crashing issue when the file dialog was given an invalid path
    - fixed screenshot capture save location
    - added screenshot capture option to tools menu
    - state manager now auto-closes when loading a state; it can be reopened quickly with F3
    - fixed GZip archive loading
    - fixed NTSC off-by-one filter bug on hires screens
    - extended Scale2x, LQ2x and HQ2x to properly filter hires screens
    - added Pixellate2x filter
2009-11-01 14:30:51 +00:00
byuu
6a17b5ed4f Update to bsnes v054 release.
After a half-dozen hours of installing and compiling various combinations of MinGW and Qt, I've finally found a combination that once again allows for profile-guided optimizations: MinGW GCC 4.3.3 and Qt 4.6.0-beta 1. Though Qt 4.4 still has broken PGO, the latest Qt beta no longer has the process freeze issue upon termination.
This release is essentially the same as v053, but it's now at least as fast as v052 was, and ~10% faster than v053, which lacked profiling.
I did add in two quick changes, however: first, when starting in fullscreen mode, the video output size was being incorrectly set to the windowed size; second, by requiring save states to match the CRC32 of games, it made debugging with them impossible, so I've turned off the CRC32 matching.
2009-10-19 16:58:29 +00:00
byuu
8135dfdac9 Update to bsnes v053 release.
This release greatly polishes the user interface, adds a new cheat code search utility, adds the snesfilter library, and adds Qt-based GUI support to both snesfilter and snesreader. snesfilter gains 2xSaI, Super 2xSaI and Super Eagle support, plus full configuration for both the NTSC and scanline filters; and snesreader gains support support for multi-file ROM archives (eg GoodMerge sets.)
Statically linking Qt to bsnes, snesfilter and snesreader would be too prohibitive size-wise (~10MB or so.) I have to link dynamically so that all three can share the same Qt runtime, which gets all of bsnes and its modules to ~1MB (including the debugger build); and Qt itself to about ~2.5MB.
However, there is some bad news. There's a serious bug in MinGW 4.4+, where it is not generating profile-guided input files (*.gcno files.) There is also a serious bug in Qt 4.5.2/Windows when using dynamic linking: the library is hanging indefinitely, forcing me to manually terminate the process upon exit. This prevents the creation of profile-guided output files (*.gcda files.) It would be tough enough to work around one, but facing both of these issues at once is too much.
I'm afraid I have no choice but to disable profile-guided optimizations until these issues can be addressed. I did not know about these bugs until trying to build the official v053 release, so it's too late to revert to an all-in-one binary now. And I'm simply not willing to stop releasing new builds because of bugs in third-party software. As soon as I can work around this, I'll post a new optimized binary. In the mean time, despite the fact that this release is actually more optimized, please understand that the Windows binary will run approximately ~10% slower than previous releases. I recommend keeping v052 for now if you need the performance. Linux and OS X users are unaffected.
Changelog:
    - save RAM is initialized to 0xff again to work around Ken Griffey Jr Baseball issue
    - libco adds assembly-optimized targets for Win64 and PPC-ELF [the latter courtesy of Kernigh]
    - libco/x86 and libco/amd64 use pre-assembled blocks now, obviates need for custom compilation flags
    - added a new cheat code search utility to the tools menu
    - separated filters from main bsnes binary to libsnesfilter / snesfilter.dll
    - added 2xSaI, Super 2xSaI and Super Eagle filters [kode54]
    - added full configuration settings for NTSC and scanline filters (12+ new options)
    - further optimized HQ2x filter [blargg]
    - added Vsync support to the Mac OS X OpenGL driver
    - added folder creation button to custom file load dialog
    - fixed a few oddities with loading of "game folders" (see older news for an explanation on what this is)
    - updated to blargg's file_extractor v1.0.0
    - added full support for multi-file archives (eg GoodMerge sets)
    - split multi-cart loading again (BS-X, Sufami Turbo, etc) as required for multi-file support
    - cleaned up handling of file placement detection for save files (.srm, .cht, etc)
    - file load dialog now remembers your previous folder path across runs even without a custom games folder assigned
    - windows now save their exact positioning and size across runs, they no longer forcibly center
    - menus now have radio button and check box icons where appropriate
    - debugger's hex editor now has a working scrollbar widget
    - added resize splitter to settings and tools windows
    - worked around Qt style sheet bug where subclassed widgets were not properly applying style properties
2009-10-18 17:33:04 +00:00
byuu
a0000c7846 Update to bsnes v052 release.
This is a maintenance release, which fixes a few important bugs. It also adds some graphical icons to soften the user interface. Note that if you have set any custom paths with v051, you'll need to set them again for the fix to work. As always, my apologies for releasing two versions so close together. I felt the bugs were important enough to warrant it.
Changelog:
    - fixed loading of files and folders containing non-ANSI characters (Chinese, Japanese, etc)
    - fixed a slight lag on startup due to the new file browser
    - fixed path selection setting, screenshots will now be saved to the correct directory
    - hid memory editor scrollbar since it does not work yet
    - disabled window positioning on Linux due to bugs in the Compiz compositor
    - added icons from the Tango icon library to the menus and panels
2009-09-29 12:25:41 +00:00
byuu
b6a85353bf Update to bsnes v051 release.
Starting with this release, I wish to take bsnes in a new direction. It has always excelled in accuracy, as the only SNES emulator to offer a full 100% compatibility rate with all known commercial software. But over the years, it has also gained an impressive array of features and enhancements not found anywhere else. It is also the only actively developed SNES emulator with rapid, periodic releases. Its only achilles heel is the steep system requirements, which is quickly being overcome by aggressive new optimizations and steadily-increasing hardware speeds.
In an effort to make bsnes even more accessible to everyone, starting with this release, bsnes is now fully open source software, licensed under the terms of the GNU General Public License. I would like to work toward positioning bsnes as a truly general use emulator, and would welcome any help with this.
Specifically, I am looking for an interested Debian maintainer to package bsnes for Linux users; as well as for anyone interested in helping to optimize and improve bsnes as a whole. It also seems that many still do not know about bsnes, I'd appreciate advice and help on spreading the word. Please leave a message on my forum if you are interested.
I would also welcome and support any forks that target specific areas: a speed-oriented version, a tool-assisted speedrun version, netplay bindings, and so on. As part of this targeting, I've also released a custom debugger-enabled version, which trades a bit of speed in turn for best-in-class debugging capabilities.
Please check back here over the following few days, I'll be writing up documentation explaining all of the various unique features of bsnes, as well as detailed compilation instructions for programmers.
Changelog:
    - corrected a small bug in HDMA processing; fixes College Football '97 flickering
    - corrected ROMBR and PBR SuperFX register masking; fixes Voxel demo [MooglyGuy]
    - DSP-4 driver AI bug fixed [Jonas Quinn]
    - added save state support to the S-DD1, S-RTC, DSP-1, DSP-2 and ST-0010 co-processors
    - fixed a freeze issue when the S-SMP encounters STOP and SLEEP opcodes
    - Cx4 save states no longer need floating-point values, and are thus fully portable now
    - added new custom file loading dialog; allows non-modal usage, screenshot previews and ROM info summary, among many other benefits
    - added support for IPS soft-patching
    - added blargg's File_Extractor library
    - added support for archives compressed using 7-zip, RAR and BZip2; which is in addition to existing support for Gzip, ZIP and JMA
    - state manager now properly updates the timestamp column on saves [FitzRoy]
    - added OpenGL renderer to OS X port
    - fixed system beep issue with keyboard input on OS X port
    - fixed menubar visibility issue on OS X port
    - fixed a Display handle leak on Linux port [snzzbk]
    - X-video driver now releases SHM memory properly upon exit [emon]
    - fixed Direct3D rendering issue that was blurring video on some cards [Fes]
    - enhanced window positioning code for all platforms
    - debugger is now GUI-driven instead of via command-line
    - memory hex editor is now fully usable
    - added PPU video RAM viewer to debugger
    - added S-CPU and S-SMP tracing capabilities to debugger
    - Qt version upgraded to 4.5.2, and compiled with optimizations enabled; runs faster but makes the binary slightly larger
    - too many code cleanups to list
2009-09-27 11:40:16 +00:00
byuu
c2453cb634 Update to bsnes v050 release.
I always regret having to post new releases so quickly, but a semi-major bug crept into v049. I'd rather fix it now, before I start making major changes that will need testing again. The problem was that the S-PPU was not being synchronized as often as it should have been, resulting in titles such as F-Zero and Super Mario Kart showing flickering lines here and there. This release fixes that.
This release also adds savestate support for Mega Man X2 and Mega Man X3, which utilize the Cx4 coprocessor; and it fixes a bug where input was still accepted even when the main window was minimized.
2009-08-25 16:00:26 +00:00
byuu
59b86cd3a8 Update to bsnes v049 release.
This is a maintenance release, but it offers a lot of bug-fixes and speed-ups, so it should be well worth the update. The debugger is not finished yet, so use it at your own risk. It is disabled in the binary release because breakpoint testing impacts performance. Once it is ready, I will release a separate binary with the debugger enabled.
Changelog:
    - Optimized S-PPU emulation, provides a ~10-15% speedup in normal games
    - Cleaned up cheat editor user interface
    - Added save state and export data path selections
    - Added workaround for a strange issue that caused PAL games to run at 60 fps sometimes
    - Fixed sprite caching issue; fixes SD F-1 Grand Prix
    - Fixed PPUcounter reset issue; fixes Bishoujo Janshi Suchie-Pai [Jonas Quinn]
    - Fixed scaling on scanline, Scale2x, LQ2x and HQ2x filters on hires and interlace screens
    - Fixed sizeof(bool) serialization issue for PowerPC architecture [Richard Bannister]
    - Fixed cheat code sort ordering
    - Fixed a bug with centering in fullscreen mode
    - Fixed an audio pitch bug when changing frequency
    - Fixed a volume adjust bug when frequency was exactly 32000hz
    - Fixed X-video RGB rendering bugs [thanks to tukuyomi for testing]
    - Fixed a file open dialog issue on Linux when using QGtkStyle [jensbw]
    - Fixed a memory corruption issue involving QApplication::main() [giovannibajo]
    - Added a preliminary debugger (disabled in binary releases due to associated speed hit)
    - Added S-CPU and S-SMP stepping and tracing support
    - Added read/write/execute breakpoint support
    - Added memory editor (currently it can only view memory)
    - Added screenshot capture support [kode54]
    - Save state archives are now ~60% smaller than before
    - Various code cleanup work, as usual (note: the debugger code is messy, as it is in-progress)
2009-08-22 12:09:19 +00:00
byuu
c26f9d912a Update to bsnes v048 release.
The biggest feature of this new release is the addition of save state support. Note that this is only currently supported for normal games, and the SPC7110 and OBC-1 co-processors. Other special chips, such as the SuperFX and SA-1, cannot currently save and load state files. I will be adding support for other co-processors little by little in future releases.
Changelog:
    - Added save state support
    - Added SPC7110 and OBC1 save state support
    - Added new tools group, with new cheat code and save state managers
    - Lots of new UI shortcuts: quick save state, quick load state, show state manager, etc
    - Escape key will now close both the settings and tools group windows
    - Added major speed-ups to both SuperFX and SA-1 emulation; both now run ~15-25% faster than v047
    - Added new video filter, LQ2x; it's as fast as Scale2x while being almost as smooth as HQ2x
    - Re-wrote HQ2x algorithm; code size was reduced to less than 10% of its original size with virtually no speed loss
    - Corrected SuperFX2 cache access timing; fixes Stunt Race FX menus and slowdown in other titles
    - Relaxed palette write limitations for PGA Tour Golf [Jonas Quinn]
    - Fixed a slight timing issue that was breaking 'An Americal Tail - Feivel Goes West'
    - Turned off auto-save of SRAM as it was causing slowdowns when writing to flash memory; can be re-enabled via bsnes.cfg -> system.autoSaveMemory = true
    - Added bsnes.cfg -> system.autoHideMenus, defaults to false; when true, menu and status bars will be hidden upon entering fullscreen mode
    - Added skeletons for ST011 and ST018 support. Both Quick-move titles get in-game now
    - Re-wrote S-CPU and S-SMP processor cores to use templates, removed custom pre-processor
    - Split PPUcounter into a base class inherited by both PPU and CPU; allows both cores to run out-of-order
    - Split inline header functions to separate files, allows headers to be included in any order now
2009-07-12 09:45:57 +00:00
byuu
7b0e484c18 Update to bsnes v047 release.
The most notable feature for this release is the addition of SuperFX support. This enables an additional eight commercial games, and two unreleased betas, to run with full support. Most notably of these would be Super Mario World 2: Yoshi's Island and Starfox. Though timing is not quite perfect just yet, there should be no known issues with any titles at the time of this release. That means there should only be two official, commercially-released titles that are not compatible with bsnes at this time: Quick-move Shogi Match with Nidan Rank-holder Morita 1 and 2 (using the ST011 and ST018 co-processors, respectively.)
SuperFX support was the work of many people. GIGO was a great help by providing the source code to his SuperFX emulator (for reference; the implementation in bsnes is my own design), _Demo_ was very helpful in getting Starfox to work properly, and Jonas Quinn provided roughly a half-dozen very important bug fixes that affected nearly every SuperFX game. Without them, this release would not be possible. So please do thank them if you appreciate SuperFX support in bsnes.
Please note that SuperFX emulation is very demanding. I hate to have to repeat this, but once again: bsnes is a reference emulator. It exists to better understand the SNES hardware. It is written in such a manner as to be friendly to other developers (both emulator authors and game programmers), and the findings are meant to help improve other emulators. As far as I know, bsnes is the first emulator to fully support all SuperFX caching mechanisms (instruction cache, both pixel caches, ROM and RAM buffering caches, ...); as well as many other obscure features, such as full support for ROM / RAM access toggling between the SNES and SuperFX CPUs, and multiplier overhead timing. By emulating these, I was able to discover what additional components are needed to emulate Dirt Racer and Power Slide, two titles that no emulator has yet been able to run (they aren't very good games, you weren't missing much.) It should be possible to backport these fixes to faster emulators now.
That said, with a Core 2 Duo E8400 @ 3GHz, on average I get ~100fps in Super Mario World 2, ~95fps in Starfox and ~85fps in Doom. Compare this to ~165fps in Zelda 3, a game that does not use the SuperFX chip. My binary releases also target 32-bit x86 architecture. For those capable of building 64-bit binaries, especially Linux users, that should provide an additional ~10% speedup. Be sure to profile the application if you build it yourself.
Lastly on the SuperFX front, note that Starfox 2 is fully playable, but that most images floating around have corrupted headers. I do not attempt to repair bad headers, so these images will not work. Please either use NSRT on the Japanese version, or use Gideon Zhi's English fan translation patch, if you are having trouble running this title.
With that out the way, a few other improvements have been made to this release: xinput1_3.dll is no longer required for the Windows port (though you will need it if you want to use an Xbox 360 controller), the video drivers in ruby now allocate the smallest texture size possible for blitting video, and the code has been updated with preliminary compilation support for Mac OS X. Note that I will not be releasing binaries for this: it is primarily meant for developers and for porting my other libraries to the platform. Richard Bannister maintains a much better OS X port with full EE support and a native Apple GUI that follows their interface guidelines much better than a Qt port ever could. He has also synced the Mac port with this release. You can find a link to that in the bsnes download section.
2009-06-07 11:57:05 +00:00
byuu
f8e425ff49 Update to bsnes v046a release.
[No changelog available]
2009-05-12 02:33:49 +00:00
byuu
2a6a66f478 Update to bsnes v046 release.
Unfortunately, I was not able to include any actual Super Game Boy support in this release. I was however able to back-port all other changes since v045, as well as add a lot of new stuff. Though there are few visible changes from the last release, internally much has changed. I'm releasing this mostly as a point release whilst everything should be stable.
I've decided to support the Super Game Boy via external DLL (or SO for Linux users.) There are many reasons for this. Most notably is that the largest special chip in bsnes right now weighs in at ~30kb of code. Emulating an entire Game Boy, not including the SGB enhancements, would require an additional ~800kb of code, or nearly half the size of the entire SNES emulation core. Add to that potential issues with licensing, conflicts with the build process / namespace, a significant increase to build time, and a lack of flexibility over which Game Boy emulator to use, and it's pretty clear that this is something best left external. At least until we have a fully trimmed, fully working SGB emulator available.
The way this will work is bsnes will look for SuperGameBoy.(dll,so), and if present, it will call out to pre-defined functions. Users will need the SGB BIOS loaded, at which point they can select a Game Boy cartridge, and bsnes will use the DLL for actual emulation. Sadly I don't have a working DLL ready for this release, and even if I did, there's no sound bridge yet for the Game Boy audio.
Other than that, much of the core has been updated in an attempt to make the core more library-like. It still has a few major limitations: it requires libco (which is not portable) and nall (which is quite large), and only one instance can be instantiated as all of the base objects are pre-defined and inter-linked. Not that I can imagine any practical use for multiple simultaneous SNES emulators anyway ...
Changelog:
    - Save RAM is now automatically saved once per minute
    - Added delay to Super Scope / Justifier latching to fix X-Zone
    - Fixed an edge case in CPU<>PPU counter history
    - S-CPU can now run up to one full scanline ahead of S-PPU before syncing
    - Added interface for Super Game Boy support (no emulation yet)
    - Fixed a bug with path selection not adding trailing slash
    - All S-SMP opcodes re-written to use new pre-processor
    - Entire core encapsulated into SNES namespace
    - Core accepts files via memory only; zlib and libjma moved outside of core
    - Major Makefile restructuring: it's now possible to build with just "make" alone
    - Linux: libxtst / inputproto is no longer required for compilation
    - Lots of additional code cleanup
2009-05-10 11:01:02 +00:00
byuu
3c42e6caa0 Update to bsnes v045r09 release.
[No changelog available]
2009-04-30 20:58:39 +00:00
byuu
5f96547beb Update to bsnes v045 release.
This is a maintenance release to fix a crashing bug in S-DD1 games (Star Ocean, Street Fighter Alpha 2), and a video issue in games using the WAI instruction.
As always, my apologies for any inconvenience. SA-1 support required modification of a large amount of delicate code in the emulation core, and our limited testing team was not able to catch these in time before release.
2009-04-20 02:55:33 +00:00
byuu
44b5f1bf27 Update to bsnes v044 release.
This release adds full SA-1 support, with no known issues. All 26 games have been tested by myself and others, and a few have been beaten from start to finish. The latter include Super Mario RPG, Kirby's Dreamland 3, Kirby Super Star and Jikkyou Oshaberi Parodius.
Please understand that the SA-1 is essentially four times faster than the SNES' main CPU, so system requirements will be very high for these games. For example, on an E8400 @ 3.0GHz, I average ~160fps in ordinary games. But for SA-1 emulation, this drops to ~90fps, with the worst case being ~80fps.
The following features are emulated:
    - 5a22 CPU core (bus-cycle accurate)
    - Memory access timing
    - SA-1 -> S-CPU interrupts (IRQ + CHDMA IRQ)
    - S-CPU -> SA-1 interrupts (IRQ + Timer IRQ + DMA IRQ + NMI)
    - SIV / SNV interrupt vector selection
    - Timer unit (linear and H/V)
    - Super MMC unit (ROM + BW-RAM)
    - BS-X flash cart slot mapping
    - Normal DMA
    - Character-conversion 1 DMA (2bpp + 4bpp + 8bpp)
    - Character-conversion 2 DMA (2bpp + 4bpp + 8bpp)
    - BW-RAM virtual bitmap mode (2bpp + 4bpp)
    - Arithmetic unit (multiplication + division + cumulative sum)
    - Variable-length bit processing (fixed and auto increment)
While the following features are not currently emulated, mostly due to lack of information:
    - SA-1 bus conflict delays
    - Write protection (BW-RAM + I-RAM)
    - SA-1 CPU priority for DMA transfers
    - DMA access timing
2009-04-19 21:34:23 +00:00
byuu
b0a8de0208 Update to bsnes v043 release.
[No changelog available]
2009-04-18 17:13:29 +00:00
byuu
11e0a2ac18 Update to bsnes v042r05? release.
New WIP. Wasted two and a half hours trying to figure out why re-
implementing IRQs at home was failing in Parodius. Finally just
reverted to wip05 and started again, changing one line at a time.
Turns out I inverted the reset release flag by mistake for the SA-1
CPU. Fun.

Adds S-CPU -> SA-1 IRQs, DMA IRQs and NMIs + SA-1 -> S-CPU IRQs +
CH1DMA IRQs. Also slightly improves variable bit-length reading and
removes DPRIO mode for now until I can test it properly.

Parodius, SRW: Gaiden and Kirby: SS should all be fully playable now.

Mario RPG is damn close, but it freezes immediately after you exit the
level up bonus screen. I don't have any idea what it wants. The
graphics on the bonus screen don't show up either, as I don't support
char conversion modes 1 or 2 yet (it uses mode 1.)

How annoying ... first the graphics on the logo are bad. Add the ALU,
good. Now the title screen background is black. Fix the ALU MA
register reset, good. Now it freezes after the first intro scene. Add
SA-1 -> S-CPU IRQs. Now it freezes half-way through the intro. Fix
S-CPU /IRQ line holding from the SA-1. Now it freezes at the start of
the level up bonus screen. Add CHDMA IRQs. Now it freezes immediately
after the level up bonus screen.

I have no idea what the hell SIV / SNV are for. I'm guessing the SA-1
controller detects which processor activates SA-1 IRQs and uses that
vector address ...? It obviously can't over-ride the S-CPU's vector
addresses.

Documentation is shit. It doesn't specify what vectors DMA / CHDMA
use, or what to do without specific general DMA / CHDMA IRQ enable
flags in the control registers, and on and on.

[No archive available]
2009-04-10 13:52:00 +00:00
byuu
3a6eb56cef Update to bsnes v042r04? release.
New WIP. Copy-paste:
> Working on SA-1, still a long way to go. Fixed a bug where I was
> clearing MA after multiplication / cumulative sum when I wasn't
> supposed to. Fixes Kirby 3 Pop Star scene.

> Added normal DMA, along with full support for DPRIO (allowing DMA to
> run alongside the SA-1 CPU) and blocking of invalid transfer types /
> modes. This fixes sprites in Marvelous.

> Also added BW-RAM bitmap mirroring to $[60-6f]:[0000-ffff], proper
> mapping for the bitmap mode to the $[00-3f|80-bf]:[6000-7fff]
> regions, variable-length bit read data port, and I now at least
> cache the register settings for IRQs (though I still do nothing with
> them.)

> I added support for BW-RAM and I-RAM write protection, but when it's
> enabled, most games will no longer load. So I'm forced to leave that
> off for now. Maybe the protection didn't actually work on the real
> hardware? Hmm ...

> No idea what the bitmap registers $2240-$224f are for, and I don't
> see how it's supposed to be possible to trigger IRQs as needed by
> Super Mario RPG and Parodius. But at least three of five games
> should now be fully playable with no issues. Speed remains the same
> as yesterday. No hit for the SA-1 CPU+DMA simultaneous transfer mode
> support.


Image Image

> I want pictures of SRW Gaiden!


Can always try it and see what happens ... after I get some sleep :D

[No archive available]
2009-04-08 12:22:00 +00:00
byuu
4c92d11d80 Update to bsnes v042r03? release.
I mentioned I wouldn't be posting a new WIP for a while so that I
could work on something in secret. That way in case it didn't work
out, nobody would be bummed out. Imagine my surprise when it only took
me two days to get this far ...

Image Image
Image Image
Image Image
(I removed the title-bar text for the sake of the screenshot
aesthetic. Check the WIP yourself if you don't believe it.)

Kirby's Dream Land 3 and Dragon Ball Z: Hyper Dimension are fully
playable. Note that most games aren't playable, and most of the chip's
added features are missing.

Speed took a ~3-5% hit for non-SA1 games due to all the new co-
processor thread synchronization primitives that you can't really hide
from inlined, super-intensive sections of the scheduler code.

As of now, and this will change, SA-1 games run about ~60% slower than
normal games. Meaning you'll really want at least an E4500, but
preferrably an E8400; and no filters.

The most impressive part is that I emulate this at the bus/clock
level. Meaning if both the S-CPU and SA-1 access RAM at the same time,
they'll see the changes and stay perfectly in sync. I even emulated
the bus conflict resolution of the SA-1 memory controller. So in terms
of accuracy, this is akin to the cycle-level S-PPU. It's the
"theoretical worst case" for the most processor-intensive, lowest-
possible emulation achievable.

I believe it was _Demo_ who speculated that it'd take at least a 10GHz
processor to achieve this. Then again, it's been so long I could be
attributing the quote to the wrong person. Don't even remember the
exact words anymore. Anyone recall?

This gives us insight into the kind of performance we can expect from
the cycle-PPU (also runs at 10.74MHz) and SuperFX. For SA-1+cycle
S-PPU, it would appear that there is no processor on the market that
can maintain full speed with that combo yet, heh. By the time I get
around to S-PPU, there most likely will be though.

Lastly, don't bug me about SuperFX support because of this. This SA-1
support is a simple subclass of the core S-CPU that already existed in
cycle-perfect, bug-free form; plus a memory mapper and ALU. Lots more
to go, and even then, this is easily multiple times less work than the
SuperFX is going to be.

[No archive available]
2009-04-07 13:14:00 +00:00
byuu
f3d1d10d3e Update to bsnes v042r02? release.
New WIP. The entire S-CPU opcode core has been re-written to use my
new pre-processor.

The downside is that it's actually slightly slower, by less than 1%.
Guessing that having almost twice the opcode implementations ends up
eating more valuable L1 cache, making it more painful than the two
conditionals per function I had before. But damn if it isn't more
readable now.

Before:
    ror_addrx(0x7e, ror) {
    1:aa.l = op_readpc();
    2:aa.h = op_readpc();
    3:op_io();
    4:rd.l = op_readdbr(aa.w + regs.x.w);
    5:if(!regs.p.m) rd.h = op_readdbr(aa.w + regs.x.w + 1);
    6:op_io();
      if(regs.p.m) { op_$1_b(); }
      else { op_$1_w();
    7:op_writedbr(aa.w + regs.x.w + 1, rd.h); }
    8:last_cycle();
      op_writedbr(aa.w + regs.x.w,     rd.l);
    }


After:
    @macro op_adjust_addrx(name)
      void {class}::op_{name}_addrx_b() {
        aa.l = op_readpc();
        aa.h = op_readpc();
        op_io();
        rd.l = op_readdbr(aa.w + regs.x.w);
        op_io();
        op_{name}_b();
    {lc}op_writedbr(aa.w + regs.x.w, rd.l);
      }

      void {class}::op_{name}_addrx_w() {
        aa.l = op_readpc();
        aa.h = op_readpc();
        op_io();
        rd.l = op_readdbr(aa.w + regs.x.w + 0);
        rd.h = op_readdbr(aa.w + regs.x.w + 1);
        op_io();
        op_{name}_w();
        op_writedbr(aa.w + regs.x.w + 1, rd.h);
    {lc}op_writedbr(aa.w + regs.x.w + 0, rd.l);
      }
    @endmacro

( note: {lc} is short-hand to 'hide' last_cycle(); )

Really worn out now, so don't expect a new WIP for quite a long time
I'm afraid. I'll worry about the S-SMP's core much later. Would
appreciate thorough testing. Given I rewrote all 256 opcodes by hand,
it's possible I made a mistake somewhere.

> Once Alt has been pressed to access the menubar (even just one
> time), the menu accelerator keys become functional even without
> pressing them together with Alt.


Wow ... that is quite alarming. Not sure why Qt is doing that. But
since I don't have a way of fixing it yet ... for now:

> Stop pressing alt.


:/

[No archive available]
2009-04-06 04:13:00 +00:00
byuu
90aa780d57 Update to bsnes v042r01? release.
New WIP.

Updated centering code, it now just has per-platform centering code.
So it should look great with no flickering / movement on Windows or
Linux.

Fixed the patching status thing so it won't say it patched when it
fails. But seems there's not enough safeties in nall::ups. A patch of
nothing but "UPS1" has a 50% chance of crashing the emulator.

Most importantly, I finally got around to writing my pre-processor,
which is intended to add macro support to both C++ and xkas. Calling
it bpp, for **b**yuu's **p**re-**p**rocessor.

I started rewriting the S-CPU opcodes to use the new pre-processor. 40
of 256 opcodes finished. I'm also separating the 8-bit and 16-bit
versions this time. Twice the code, but it's easier on the eyes.

Old:
    ldy_addrx(0xbc, ldy, regs.p.x),
    ora_addrx(0x1d, ora, regs.p.m),
    sbc_addrx(0xfd, sbc, regs.p.m) {
    1:aa.l = op_readpc();
    2:aa.h = op_readpc();
    3:op_io_cond4(aa.w, aa.w + regs.x.w);
    4:if($2) last_cycle();
      rd.l = op_readdbr(aa.w + regs.x.w);
      if($2) { op_$1_b(); end; }
    5:last_cycle();
      rd.h = op_readdbr(aa.w + regs.x.w + 1);
      op_$1_w();
    }


New:
    @macro op_read_addrx(name)
      void {class}::op_{name}_addrx_b() {
        aa.l = op_readpc();
        aa.h = op_readpc();
        op_io_cond4(aa.w, aa.w + regs.x.w);
        last_cycle();
        rd.l = op_readdbr(aa.w + regs.x.w);
        op_{name}_b();
      }

      void {class}::op_{name}_addrx_w() {
        aa.l = op_readpc();
        aa.h = op_readpc();
        op_io_cond4(aa.w, aa.w + regs.x.w);
        rd.l = op_readdbr(aa.w + regs.x.w + 0);
        last_cycle();
        rd.h = op_readdbr(aa.w + regs.x.w + 1);
        op_{name}_w();
      }
    @endmacro


    @global class sCPU
    @include "opcode_read.bpp"

    @op_read_addry(ldx)
    @op_read_addry(ora)
    @op_read_addry(sbc)


Yes, I know the above can be done with the C pre-processor. Two major
reasons I avoided it:
1) I refuse to put \ after every line.
2) parameters are limited, eg MACRO(&=~, x += 2) would not work.

The important thing was making a more generic / flexible format. Will
allow me to kill off src/tool, though I'll still include the new
parser's source under src/lib/bpp.

May extend bpp in the future, who knows. @if/@else/@endif would be
nice, as would nested macros and static programming functions.

[No archive available]
2009-04-03 11:15:00 +00:00
byuu
b5b21a4ec2 Update to bsnes v042 release.
A new release quite a bit faster than I was expecting, but a lot has changed. Most importantly is a new Windows input driver, "RawInput". The downside is that this makes bsnes require at least Windows XP, as Windows 2000 and earlier lack RawInput support. The upside is that input from multiple keyboards and mice can be distinguished from each other — very useful for dual-Justifier support in Lethal Enforcers. Users of previous versions of bsnes will need to manually select the new driver via Settings->Configuration->Advanced->Input driver, and will need to re-map all assigned input keys, including the default user interface hotkeys. Or alternatively, delete the configuration file under %APPDATA%\.bsnes or ~/.bsnes.
Also new is an XInput driver, which avoids the DirectInput driver limitation of being unable to distinguish the two shoulder trigger buttons. This makes bsnes require DirectX 9.0c or later for the necessary drivers. Note that Windows Vista SP0 does not ship with these, so if you haven't installed it yet, you'll need to do so. This driver is part of the "RawInput" driver mentioned above.
This part is important: if you receive an error regarding xinput1_3.dll, you need to download and install the DirectX 9.0c run-time.
For those on Windows 2000, or without DirectX 9.0c, it is still possible to compile and run bsnes with the older DirectInput driver only; but I won't be providing a binary myself for this — at least not at this time.
More bad news for some: hiro, my Win32 / GTK+ API wrapper, has been discontinued and removed from the source tree for this release. Qt 4.5.0+ is now required for the user interface. Very sorry to the Linux distros that do not have packages for QT 4.5 yet. You'll need to continue with v041 for now.
2009-03-30 18:21:47 +00:00
byuu
2b587de04b Update to bsnes v041r08? release.
Okay then, if everyone possible could test this _quickly_, I can post
a new release tonight. Especially the input mapping, and especially
there for gamepads / controllers.

    http://byuu.org/files/bsnes_test.zip


No source, Windows only binary.

If you get an error about xinput1_3.dll, install the DirectX 9.0c
redistributable.

Changes from last WIP:

- I was able to reproduce FitzRoy's issue, and fix it. Really, really
crappy gamepads that send large phantom movements when the user isn't
even touching the axes may trigger the calibration window early; not
much I can do about that. None of my controllers do this at least.

- I updated the mouse button capture window. It now uses a framed
label (kind of like a groupbox but with text in the center), and you
have to release a mouse button inside the box for it to map.

- Screensaver / monitor power saving disabled on both Windows and
Linux.

- More improvements to window centering.

> Btw, are you on SP1 like me?


No, I'm using Windows 7 beta 1.

[No archive available]
2009-03-29 22:04:00 +00:00
byuu
1e133eeb5e Update to bsnes v041r07? release.
New WIP.

Rewrote a large portion of the RawInput driver, cleaning it up
substantially. Each API is now its own separate class, and pInputRaw
(the ruby private implementation class) pulls data from each separate
driver.

For keyboards, I've added the fixes for print screen and
pause/num_lock.

For joypads, I added XInput controller detection through RawInput's
RIDI_DEVICENAME, instead of that crazy ass COM + wbem shit from MSDN.
I also added a proper XInput driver, so now the left and right axes
can be mapped independently, and you can use both at the same time.
All in all, quite expensive and a lot of work, but it's the little
bits of polish that really make an application shine.

Do note that MinGW still doesn't ship with libxinput.a -- it's only
been out for four years now, after all. You'll need to take XInput.lib
from the DX9 SDK x86\lib folder, copy it to MinGW\lib, and rename it
to libxinput.a. I'm surprised that works, but it does. I tried to use
LoadLibrary("xinput1_3.dll") + GetProcAddress("XInputGetState"), but
the app kept crashing in bsnes when optimizations were enabled. gdb
showed it to crash in msvcrt!memcpy() from inside dinput8.dll. No idea
what the hell was going on there.

Non-XInput controllers will fall back on using DirectInput, of course.

Fixed the joypad indexing, so multiple joypads should work again. Got
the window centering hopefully right on WinXP so that windows opening
for the first time won't 'flicker' anymore. Added the mklib(gdi32)
entry, so you can compile with -mconsole again.

Re-did the mouse capture stuff. 'Assign Mouse Button' + 'Assign Mouse
Axis' are now buttons instead of menu buttons.

For button assignment, you are given a window with a large disabled
button named '(capture box)'. The instructions say to put whatever
mouse you want over this button and click the mouse button that you
want to assign. It'll assign upon release. Right now, assignment won't
work for 1-2 seconds to prevent instant assignment when you click.
I'll make a button mask in the future to avoid that delay. Also, it
only verifies you clicked a mouse button while the capture window was
active. I'll need to look into Qt's methods for mapping cursor clicks
to control regions onscreen. Good news is it's now much easier to
assign extended buttons like up+down ... you don't have to know what
button #s they are anymore.

For axis assignment, mapping based on mouse motion is too dangerous.
So you get a window with two buttons: 'X-axis' and 'Y-axis'. I can add
Z-axis if anyone wants (for the scroll wheel), but it seems kind of
useless. The instructions say to click the axis button you want, with
the mouse you want the axis assigned to.

Now I know the instructions will probably just confuse people with
only one mouse (~99% of users), so if everyone really thinks it'd be
better to leave multi-mouse users in the dark about how the capture
system works, I can take out the verbose notes.

Hoping your controller will work now, FitzRoy. Otherwise I have no
idea what's wrong. Be sure you manually set the driver to RawInput,
too. Will most likely require a config file with "version = 42",
otherwise reset to defaults, for the next release.

[No archive available]
2009-03-29 07:48:00 +00:00
byuu
9de4b1dea2 Update to bsnes v041r06? release.
New WIP. This version adds RawInput support.

I strongly recommend just deleting the old config file, because all
the old bindings won't work. You may also need to select the driver
manually from the advanced tab (it should be the default if no config
file is found.)

I now allow up to sixteen keyboards, sixteen mice and sixteen joypads
to be uniquely identified and independently mappable. So if anyone
wants to setup a 6-man-per tag-team game of N-warp Daisakusen, now you
can. And $50 for the first person to take a picture of said event for
me ;)

While ZSNES beat me to mouse support with ManyMouse, I win with
"ManyKeyboard" :P

And if anyone wants to get me one of those SNES barcode battler games
+ hardware, I'll try and emulate a generic USB HID barcode scanner.

Let's see ... currently the mouse assignment from the UI won't work.
You'll need to edit bsnes.cfg. The format is:

mouseNN.x, mouseNN.y, mouseNN.z, mouseNN.buttonXX
NN = 0 - 16, XX = 0 - 4

Need to plan how I want to design a mouse capture window, so that will
be a while still.

Also didn't get around to the screensaver disable code just yet. Took
me seven hours straight and I just barely finished the RawInput driver
in time.

Testing would be greatly appreciated.

[No archive available]
2009-03-26 14:57:00 +00:00
byuu
2b84d1ef37 Update to bsnes v041r05? release.
Meh, window is appearing on XP when placed at -1,-1. Changed that to
2560,1600 to stop that initial flicker before the windows appear
centered. Also from the WIP I made it use showNormal() so it'll show
windows even if they were previously minimized.

> Some people prefer baby seal meat.


I'm still not following your point. I've already added it. It took me
a few days but it's done. Everything that worked before is exactly the
same, but you now have the _option_ of doing more. Binary size is the
same, source code grew by ~2k (mostly due to extreme commenting.)

Not necessary, no; but I wanted it. Now we have it, and it's one more
bit of polish (along with infinite cheat codes, infinite length
descriptions in UTF-8, cheat code grouping and sorting, UPS support,
single or multi user modes, resizable config windows, flexible theming
and backdrop images, ...) that no other SNES emulator has yet :D

And tons of stuff I'm missing: savestates, rewind, SuperFX, SA-1,
speed, macros / key combos, movies, netplay, ...

-----

This works well enough for Windows:

    class Application : public QApplication {
    public:
      #ifdef _WIN32
      bool winEventFilter(MSG *msg, long *result) {
        if(msg->message == WM_SYSCOMMAND) {
          if(msg->wParam == SC_SCREENSAVE || msg->wParam ==
    SC_MONITORPOWER) {
            printf("blocked sleep\n");
            *result = 0;
            return true;
          }
        }

        return false;
      }
      #endif

      Application(int argc, char **argv) : QApplication(argc, argv) {}
    };


Add XTestFakeKeyEvent sans XSync (to avoid X-Video stuttering issues
per BearOso) and screensaver disable should be taken care of -- at
least until someone works on the OS X port.

[No archive available]
2009-03-24 19:15:00 +00:00
byuu
e2a44195cd Update to bsnes v041r04? release.
Okay, new WIP. That's the best I can possibly do.

For all six axes, I now ignore input until the state changes for the
first time. If it goes from 0 to > 24576 in a single poll, it
considers the axis to be a button. Otherwise it treats it as a stick.

Positive on a stick means down or right, so it's less likely users
will hit this first (up, left are more common for assignment as
they're first in the control lists.)

To minimize the damage of a bad map, I now map each axis to their own
value without regard for axis vs analog button indexing. Eg you will
have { axis00, axis01, analogbutton02, analogbutton03, axis04, axis05
} instead of { axis00, axis01, analogbutton00, analogbutton01, axis02,
axis03 }. That way if you do screw up the mapping and restart, the
indexes won't change on you. I don't do that on Linux to allow as many
axes + analog buttons as possible, and because it's not needed.

I had to choose what to bias, so I went with axes as they seem more
important overall. Eg -32768 to +24575 = stick; +24576 to +32767 =
button. That means it's easier to map a button as an axis than vice
versa.

It's unfortunately still quite easy to map these incorrectly, eg if
you slam down on a button or smack a stick as hard as you can down or
to the right.

But it was basically ... have a chance of mapping inputs wrong, or
don't let them be mappable at all. The former seems better in that
case.

If _anyone_ has a proper solution for this problem, I'd greatly
appreciate it. In fact, let's put a bounty on it. I'll pitch in $20
for the solution (a way to get the true state of axes without
requiring the user to press a button first.)

I also used EnumObjects over all absolute axes to map them to -32768
to +32767. That should help with the Xbox 360 controller that defaults
to half that range or whatever (fuck you, XInput.)

Testing would be appreciated. Both for the Windows and Linux ports,
though I can't foresee there being any problems with the Linux one.

---

SDL on Win32 does the same thing ... not surprising since it just uses
DirectInput anyway.

    #include <SDL/SDL.h>
    SDL_Joystick *gamepad;

    int __stdcall WinMain(HINSTANCE, HINSTANCE, LPSTR, int) {
      SDL_InitSubSystem(SDL_INIT_JOYSTICK);
      SDL_JoystickEventState(SDL_IGNORE);

      gamepad = SDL_JoystickOpen(0);
      while(true) {
        SDL_JoystickUpdate();
        unsigned axes = SDL_JoystickNumAxes(gamepad);
        for(unsigned n = 0; n < axes; n++) {
          printf("%d = %6d; ", n, SDL_JoystickGetAxis(gamepad, n));
        }
        printf("\n");
      }

      return 0;
    }

[No archive available]
2009-03-22 02:09:00 +00:00
byuu
9ac912d100 Update to bsnes v041r03? release.
New WIP.

This adds support for hats and analog buttons, and fixes the centering
code so that it never ends up minimized on Linux at startup. Just went
back to putting the window offscreen before centering, as thanks to
the delay in propagating window messages in Xorg, you don't even
notice the flicker on Linux.

You can now have up to 8 hats, 16 axes, 16 analog buttons and 96
digital buttons. Just to future proof things. If your controller has
more than that ... then I demand you send it to me before I'll support
it.

SDL input for Linux should work fully: hats allow four unique inputs,
axes two and analog buttons one. It calibrates to tell the difference
when you start the emulator.

DirectInput doesn't work so well. The DIJOYSTATE2 struct has a ton of
analog inputs, but only lX/lY map to the first stick, and lRx/lRy to
the analog buttons. But I can't even detect those properly because for
some bastardized reason, polling them at startup returns 0, 0. It
isn't until the user presses at least one button that the controller
'snaps out of it' and returns the proper +32767,+32767 for the two
buttons.

On the bright side, DI treats POV hats like POV hats. It allows up to
four, so that's what you get. You'll have to deal with that or the
first analog stick for Windows.

Unless there's a DirectInput expert here, not sure I can fix this. The
other inputs are not in DIJOYSTATE2 at all. Yet somehow the control
panel applet can sense them.

Mapping is fully inclusive, for joypad buttons and UI shortcuts, you
can use keyboard buttons, mouse buttons, joypad buttons, joypad axes,
joypad hats, joypad analog buttons. For mouse / super scope axes, you
can use mouse axes and joypad axes. Buttons aren't bi-directional and
lack the precision to support the mouse / SS / Justifier to any usable
degree, and analog buttons are uni-directional.

> Have you thought about rendering plugins for sound, input, video?


Would rather not. Cross-platform dynamic library support is terrible.

> Hmm must be "spin the black circle" as far as I can tell.


Yeah, here. I posted about it here a while back. Probably should've
mentioned the name.

> Yeah. That cheating nonsense discourages me from really playing any
> online games with top scores like that. It sucks all the fun out of
> it.


It's usually okay when it's painfully obvious. I cleared every level
at least a dozen times, and took advantage of every collision quirk
there was to get time there. For there to be a > 30 second leap
between #4 and #5 (and #1-4 all from the same person), it's pretty
obvious that he was cheating in some way.

I consider the best time to be 03:58, and 04:06 (edit: 4:01:97 now) is
close enough to make me happy :D

[No archive available]
2009-03-18 16:12:00 +00:00
byuu
d15092dada Update to bsnes v041r02? release.
New WIP.

I've added the centering code. Had to hide and show the window to
prevent the Windows 'restore-from-taskbar' animation. That's causing
Xorg events to not propagate quickly enough so sometimes the windows
start minimized. I'll keep working on it.

I've also killed joypad<>::up, down, left, right; and added
joypad<>::hat<0-3>.

So far, I've adapted the Qt UI to map analog axes. You'll see now when
you map one that you get ::lo or ::hi to indicate the state direction
at the time of assignment. I have not done this for hats, so only the
'up' direction will map currently.

I only know how to read the first two axes (first stick) on Windows,
so it won't see any others yet.

For the mapping, I made it both range-sensitive (requires at least 75%
force to map, 50% force to trigger) and distance-sensitive (prevents
auto-assignment for those annoying analog sticks that flicker within a
few points in any direction; also protects against those sixaxis
buttons that are idle at +32767) -- the distance is at 512, and slow
movement causes ~1,000+ movement based on ~20ms sampling, should be
enough.

To prevent rapid assignment of the same analog axis when using the
"Assign All ..." button, and because it makes no sense to allow it,
I've added a check to make sure that each key assignment is unique to
all previous ones. This doesn't apply to individual assignment in case
you really do want one key to map to two inputs. It was that or add a
~200ms delay between each assignment.

The only thing my emulator doesn't handle completely are those six-
axis buttons. Mostly because I have no way of telling what they are. I
can't tell if a user is holding a stick south-east, or if it's a
button not pressed. You can map them anyway, but it won't work as you
expect a button to.

Lastly, I'm not sure how to support mouse pass-through just yet. Right
now I block mouse input when the mouse isn't exclusively acquired. If
I don't, then clicking to acquire the mouse will send a 'fire' command
to the emulator. But if I do, then you can't use a mouse as a joypad.

[No archive available]
2009-03-17 15:16:00 +00:00
byuu
91270e504a Update to bsnes v041r01? release.
New WIP.

I _may_ have found the SDL POV hat issue. I was masking a result, but
the array wasn't boolean. It may work better now.

I've also dropped the analog -> D-pad mapping in both drivers. It just
doesn't work ... some controls treat the D-pad as a mirror of the main
analog axis, some treat it as a POV-hat, some treat it as its own
'analog' axis (that only returns -32767, 0 or 32767).

What this means is that for now, no mapping of analog sticks will work
correctly. I'm going to have to adapt the mapping system to
accommodate these.

I also added an 'Assign All ...' button to the input capture window.
Note that it is grayed out on 'User interface' items. Although I
could, it makes no sense to quickly assign all of those (as most you
won't want mapped to anything at all.)

I'm thinking about re-ordering the list from:
Up, Down, Left, Right, A, B, X, Y, L, R, Select, Start
to:
Up, Down, Left, Right, Y, X, B, A, L, R, Select, Start

Reason being that it's more natural with the layout of the real
controller. Agree or disagree?

Oh, and I fixed the NTSC merge settings thing. Takes effect
immediately too.

[No archive available]
2009-03-16 14:35:00 +00:00
byuu
f976998222 Update to bsnes v041 release.
I apologize for posting a new version so quickly. This is mostly a maintenance release: joypad analog axes can once again be mapped to the mouse / super scope axis controls, the input capture window has been rewritten to be much more compact, and I've omitted all unneeded features of Qt 4.5 to reduce the final binary size as much as possible (from ~3.33MB to ~2.3MB.) The source archive is also ~20% smaller.
Barring any unforseen problems, this will likely be the last official release for a while.
Also, I finally have dedicated hosting for byuu.org. I ask that you please update any bookmarks to point here, rather than to byuu.cinnamonpirate.com from this point on, as we'd like to free up the cinnamonpirate sub-domain slot.
2009-03-15 03:42:52 +00:00
byuu
def86470f4 Update to bsnes v040 release.
Too much to really name. The biggest news is that the entire user interface has been re-written from scratch. It is now far more polished and professional. To name one example; the cheat code editor now has checkboxes in the list to quickly toggle codes on an off, there is now a global hotkey to toggle all cheat codes, and each cheat code can contain multiple individual Game Genie or Pro Action Replay codes, allowing easy grouping of multi-part codes.
You'll also notice new artwork: a logo created by Derrick Sobodash (note that the logo contest from below is still active — if someone can design a better logo, it can appear in v041), and a new photo-realistic SNES controller graphic by FirebrandX.
I was finally able to utilize MinGW's profile-guided optimizations, which means this release is approximately ~12% faster than v039.
And emulation itself was even improved(!), such as with Jonas Quinn's fix for a sprite overflow bug.
There were many other changes as well: Linux users will be happy to see RGB overlay support for the X-Video driver, many will benefit from greatly enhanced warning messages and tooltips throughout the GUI, Windows users will now be able to access the menu without freezing emulation, etc etc.
2009-03-09 15:17:32 +00:00
byuu
3e7578761a Update to bsnes v039r22? release.
New WIP.

Softened the panel titles a lot, they take less space but still stand
out well enough.

Should I add a checkbox+global hotkey to toggle the cheat code system
itself on and off? Ala the flip switch that's on the real Game Genie.
Not sure if it's as important anymore now that it's easy to group
multiple cheat codes together and toggle them with just one checkbox.
If so, I need a caption for the checkbox widget, eg "Enable cheat code
system", but something more descriptive.

Rewrote a couple chunks of the nall::string library. I had a lot of
problems with casting due to things like this:
    int strdec(const char*);
    string strdec(int);
    string::operator int();
    string::operator const char*();
    string::operator=(int);
    string::operator=(const char*);
    string::operator<<(int);
    string::operator<<(const char*);
    string::string(int);
    string::string(const char*);


It couldn't implicitly determine if string() << 0 should refer 0 as
const char* or int. So I started by dropping the string->integer
implicit conversions, no need for those, use the strTransform(string)
functions instead. More verbose of the format you want anyway (eg
signed or unsigned integer).

Next, rather than try and implement signed+unsigned+signed
short+unsigned short+signed char etc etc for string::operator= +
string::operator<<, I instead wrote them to use templates. Worked
around the limitation that classes can't use explicit template
specialization by using global thunk functions. operator<<, operator=
and lstring::operator<< all share one set of template specialization
functions to perform conversion of any supported type to a string for
assignment or appending. Pass an unsupported type and it will throw a
"template function undefined" error and fail to compile. No run-time
surprises.

I was careful to implement the copy constructor and copy operator= to
stop the compiler from generating its own functions that copy around
the raw pointer (which would lead to memory leaks + double memory
frees.) So it should be 100% leak proof.

I also split strdec(int) into strsigned(signed) and
strunsigned(unsigned); and updated all the other stuff that used the
lib for that (eg nall::config et al), so you can now perform
unsigned->string conversions on UINT_MAX without getting back -1.

Only thing I'm debating now is if I want to trade C compatibility for
speed and store the string lengths inside the string class for O(1)
length + append functions, compared to their O(n) now. Multiple
chained appends raise that to O(n^2), but with ~20 appends at most per
string, it's hardly a bottleneck right now.

I'm hesitant to do this, because if I do, I'll have to remove char*
operator()() to give a raw handle to the string pointer. I use that
for quick libc const char*->string& wrapper functions, and it's also
nice for other functions to use. And char& operator[](size_t) would
take a hell of a speed hit for having to check for '\0' writes to
adjust the length internally.

_Not_ going to allow storing '\0' directly ala std::string, and make
string::c_str() require memory allocation. Fuck that. Use an
appropriate binary container if you want '\0' inside a block of
memory. The whole idea of nall::string is to maintain 100%
compatibility with C89 strings and their functions.

[No archive available]
2009-03-05 11:48:00 +00:00
byuu
45feae8f75 Update to bsnes v039r21? release.
New WIP.

I added FirebrandX's controller image (let me know if you don't have
the WIP link and want to check it out, FB.)

I also added Derrick's SVG logo for now. The contest thing isn't over
yet, and I like DMM's the best so far (sans the aliasing issues.) But
the auto-resizing to exactly what I want is too nice to pass up. I
think I'm going to require SVG for the final submission at this point.
Side note: Qt supports SVG for auto-scaling, but I use a PNG anyway as
not all Qt libs are going to have SVG support built-in. I still want
SVG for website / print purposes.

For belegdol, I added SDL hat support. It only works with the first
hat, as I figured those four-controller-as-one-device cheapass drivers
might not work well if every single players' hat manipulates the same
controller. You'll have to let me know how it works, since SDL doesn't
detect my joypad's hats.

I'd also like it if someone could test the X-Video RGB support. Anyone
with an RGB overlay surface can do so just by selecting the Xv driver.

[No archive available]
2009-03-01 11:09:00 +00:00
byuu
4d10c36870 Update to bsnes v039r20? release.
New WIP. This one's available here:
http://byuu.cinnamonpirate.com/temp/bsn ... ip.tar.bz2
http://byuu.cinnamonpirate.com/temp/qtdlls.zip

Please don't distribute to other news sites.

You will need to extract the Qt run-time DLLs into the same folder as
the bsnes executable. And you'll likely need WinRAR or 7-zip to
extract the WIP archive.

Please report any issues you can find that weren't present in v039.
I'd like for v040's release to be as bug-free as possible.

Changes from wip19:

The new 'current directory' caching mechanism was caching _after_ save
RAM load, so it wasn't loading save files correctly on first run.
Fixed.

I wasn't setting the internal renderer to match the requested video
mode, so PAL mode wasn't showing the extra scanlines. Fixed.

Had to add a 50ms (very conservative) delay when toggling fullscreen
mode to give Xorg enough time to complete the request. Before it was
trying to query the window size too soon and not fully expanding
fullscreen video to fit the screen. Because of this added delay, I
made it clear the video output when toggling modes. Can't help the
slight line redrawing issue in Qt. Not a bug in my code there.

After reading FitzRoy's comments and thinking more about it myself,
I've decided against the 'intelligent' fullscreen auto-menu hide.
Sorry. It'll still remember whether you were in fullscreen mode on the
last run, but the menubar is always visible by default now. It doesn't
change your menu visibility when you toggle fullscreen anymore.

I also added back the aspect adjust settings to the config file. This
time I combined them to floating point values. So instead of the old:
video.ntsc_aspect_x = 54
video.ntsc_aspect_y = 47
You now have:
video.ntscAspectRatio = 1.14893617

It's an advanced feature not in the GUI, so I expect you to know how
to compensate for the 256x224 vs your native monitor's resolution if
you screw with that setting. Maybe someone can make a web script to
calculate it ala those Xorg modeline generators or something.

Lastly, I removed the group boxes. Took advantage of every row having
three options but one, and added a spacer to get everything aligned.
Advanced panel looks a lot better now.

[No archive available]
2009-02-25 12:32:00 +00:00
byuu
cca8164005 Update to bsnes v039r19? release.
New WIP.

- added hardware settings group to advanced panel. Lets you control
hardware region and base unit.
- added descriptive tooltips to video and audio settings.
- revised documentation to list filetypes, mention BS-X issues and
generalize unsupported special chip notes
- improved handling of paths: core now keeps track of cartridge path
rather than relying on the current working directory; export data path
now works the same as SRAM / cheats / etc when not selected
- fixed XvRGB15/16 blue color channel glitch; testing would be much
appreciated
- I now set the drivers to "None" when they fail to initialize and
give a warning. Before the app would just crash on cart load if this
failed
- added more options to the config file: allow invalid input, analog
axis resistance, and for the first time ever -- CPU, PPU1 and PPU2
version configuration

Really not happy with the overall look and feel of the advanced panel.
I don't think the group boxes are working there. Also, the filetype
descriptions are very terse, but I like them that way. Don't really
care if someone doesn't know what 'non-volatile' means, that's why god
made Google. Complain and I'll make the complex terms hyperlinks to
Wikipedia :P

I'll look into the fullscreen menubar thing again in a few days or
something.

> The Cpu and DMA approach is the same like in bsnes. The exception
> are the stp and wai opcodes.


Heheh, I bet someone looking at STP without being aware of how the
cothreads work would gasp in horror :D

> You are right it's really hard to jump back from doing a nested hdma
> transfer within a dma. But with my approach such an action is not
> needed.


Yeah, I know it's possible with enslavement to only make the simpler
processor a state machine. In our case, the S-SMP. That's how SNEeSe
does it. I just really hate the idea of enslavement.

I can certainly see why others get so upset with me on this, but
having each module cleanly separated is, to me, more important than
savestates. That it's somewhat faster here is just an added bonus. I'm
sure you can appreciate my S-SMP op_*.b files over those state
machines for maintenance, too ;)

As for your work on rewriting all the S-SMP opcodes, I wish you
would've mentioned this to me earlier ... the cycle labels in those .b
files are used to create the exact same switch(cycle) {} code you
wrote automatically, you just have to use a different generator. Given
I dropped that generator back at ~v017, it should be easy to update /
rewrite. The downside is that they don't directly support the bus hold
delays.

Still overall, really really impressive stuff. Kudos on making
something so cool :D

[No archive available]
2009-02-23 13:45:00 +00:00
byuu
0f83e39d5c Update to bsnes v039r18? release.
New WIP.

Added fix for OAM Yflip overflow bug pointed out by Jonas Quinn.

Re-added QGroupBox controls as per discussion with jensbw, the frame
issue should be fixed with Qt 4.5.

Config file now omits " #" marker when there is no item description.

Main window resizes itself a bit better before showing itself on Linux
for the first time. Not a problem at all on Windows.

Using _wgetcwd instead of getcwd for Windows UTF-8 support.

Finished Cartridge class revisions: load_foo returns boolean success,
unload() doesn't need one so that was removed, dropped redundant
bsx_cart_loaded() as you can tell via mode() == ModeBsx. Still need
bsx_flash_loaded() for register mapping purposes.

Fixed hiro port to compile again.

I also rewrote much of the Xv driver. It now properly finds modes via
XvListImageFormats(), and I added support for more modes. It used to
be YUY2 only, now it supports RGB32, RGB24, RGB16, RGB15, YUY2 and
UYVY (chooses the driver mode in that order.)

Unfortunately I was only able to test YUY2 and UYVY with my driver, so
no idea if the RGB modes even work or not. I know RGB16/RGB15 will
have problems, forgot to mask the blue channel before uploading: for
line 344 and 359, (p >> 3) needs to be ((p >> 3) & 0x1f).

To test each mode, the optimal ones would have to be manually disabled
since there's no external way to select the preferred driver. And the
RGB32 copy is sub-optimal, I'll probably allow direct rendering to its
surface in a future revision.

[No archive available]
2009-02-22 11:22:00 +00:00
byuu
ebbcc998d0 Update to bsnes v039r17? release.
New WIP. Posted only for the sake of testing for regressions.

The only real change was adding nall::property as discussed earlier,
and completely revamping the Cartridge class with it. Results:
http://byuu.cinnamonpirate.com/temp/cartridge.hpp

Compared to the old version, it's night and day. All stuff that can be
hidden has been, end-user can't screw with important internal-settings
while emulation is active, as many functions as possible were made
const, ditched char* stuff to replace with string, removed a few
useless structs, simplified the public interface, replaced a memory
duplication in the cart loader that removes the header with a
memmove() instead, blah blah blah.

If I screwed any of this up, it may break the following:
- special chip detection
- RAM / PSRAM / RTC data saving
- UPS patching
- cheat code loading
- relative path stuff
- etc

[No archive available]
2009-02-21 10:39:00 +00:00
byuu
78da6946c6 Update to bsnes v039r16? release.
New WIP. Sorry about the delay in adding your .desktop file, belegdol.
I appreciate you sending it to me.

- worked around a cursor bug in Qt/Xlib: if you started the app and
your mouse cursor was on top of where the window appeared, it gave you
the "resize window" grip cursor, and it would stay like that. The
resize function now ensures you always get the normal cursor.
- worked around a bug in Qt/QGtkStyle: if you pass a default path of
"", it throws all kinds of errors at you on the terminal window, I
implemented a current working directory system for both folder path
selection and file selection (when no default game path is selected.)
It starts in your program startup directory (via getcwd()), and will
update whenever you choose a valid file or folder without canceling
the window.
- icon is now stored in $(prefix)/share/pixmaps instead of
$(prefix)/share/icons
- added belegdol's bsnes.desktop. If I can figure out how to get the
one from Derrick, his has stuff that makes it auto-suggest bsnes for
.SFC files and such. I'll probably add his extensions to it later.
This file installs to $(prefix)/share/applications, and bsnes shows up
under 'games' now.
- updated src/cart a bit, merged some 5x ~800 byte files to a general
cart_loader.cpp file, renamed the functions to be clearer:
cartridge.load_cart_bsc() -> cartridge.load_bsx_slotted();
cartridge.unload_cart_st() -> cartridge.unload_sufami_turbo();

- resized HTML viewer, was too small before, but I think it's too wide
now, meh.
- readme was renamed to documentation. I don't care that it's not
verbose enough to warrant the name right now. I intend to expand upon
it in the future and have it be the general sort of "help"
functionality, hence the name change.
- both the documentation and license are now stored inside src/data as
HTML files. These are embedded with Qt's resource compiler into the
final binary. Easier to edit, and the HTML files can stand on their
own.
- I've partially revamped the documentation. It's somewhat of a
compromise between my ideas and FitzRoy's. I may expand on it a bit,
but I like how it is now, so don't expect many more changes there
please.
- Revamped the license stuff a good deal, removed a lot of cruft.
Grant of Rights section remains the same, so no legal changes.

> bsnes could detect the computer's time zone, and switch to purple if
> necessary.


The US SNES is an eyesore. Both the console and especially the
controller. Fuck it, if they want to see that they can look it up on
Google Images :P

[No archive available]
2009-02-17 12:56:00 +00:00
byuu
4d31452bca Update to bsnes v039r15? release.
Okay, new WIP. To my knowledge, the Qt port now matches or exceeds the
feature-set / quality of the hiro port in every regard, sans things
I've intentionally removed.

- added back all the UI shortcut keys
- started using Qt's resource compiler, rcc, to embed files into the
binary on all platforms; not as efficient as my base56+LZSS method,
but much more standardized and avoids string length limits in Visual
C++
- Linux port now sets the program icon from bsnes.png @ 48x48 (any
larger and the filtering makes it look bad)
- Windows port uses embedded 16x16, 32x32, 48x48 or 256x256 icon as
before
- all windows now rise to the top when they are shown
- replaced about screen -- it's just a placeholder for now so that
it's not modal. Want to put the logo on there, with the rest of the
info and a webpage link below
- removed 'Ok' button from document viewer window
- killed icon48.h and controller.h, ~100kb worth of source. Right now,
hiro port shows black boxes in their place. I'll do something nice
with it later; but I don't want to grow the source that big for the
non-standard target
- added .zip, .gz and .jma to filter, based on compilation flags

Thinking about killing src/data, putting the necessary stuff in each
platform folder. Just a slight issue with windres taking a relative
path to the working directory, so it won't allow easy renaming of the
ui folder names if I do that. Can work around it with 'cd' command in
the Makefile, I suppose.

Would be nice to take advantage of rcc a bit more: it's very easy to
use 16x16 / 32x32 icons inside the UI for eg menu and config panel
list icons. Just going to be tough to make nice icons for them.

Stuff removed from hiro:
- controller graphic:
I love this graphic and want to have it in the official binary, but it
looks really odd when it's only there for one controller type ...
should we keep it anyway? If so, I'll embed it with rcc.
- trace logging hotkeys:
Want to replace these with a real debugger that will have buttons for
them. That will be a long-term goal, of course. May add shortcut keys
for the debugger functions too at that time.
- frameskipping:
Probably the biggest one, I didn't want to re-add this as the new PPU
will make it pointless anyway. If we do add this back for the fast
PPU, I'll probably keep the option hidden from the UI side.

> SFT was the acronym used for the catalog codes. For example, Poi Poi
> Ninja World had SFT-0103 on the cartridge. So there is some historic
> precedent for it at least. BSX, not so sure, but I figured
> everything else was three letters.


Sounds good, but I'd like to check with Nach first. He seems to be on
extended leave at the moment.

> Exhaust Heat 2 still bug out


Wasn't aware ST-0010 had any problems. Not sure if it's bit-perfect or
not anymore, but it definitely has no DSP timing.

[No archive available]
2009-02-15 08:23:00 +00:00
byuu
eb1eca4a6d Update to bsnes v039r14? release.
Okay, another new WIP.

Drag-and-drop is in, and it works in Windows and Linux. Tested with
Thunar under Xfce, but it should be fine with any freedesktop.org-
compatible app/WM.

Worked around the Qt bug ... either
qtreewidget->currentItem()->isSelected() returns the true current item
and the Xlib port has a bug, or it returns the previous and the
Windows port has a bug. I'm using
qtreewidget->selectedItems().count()==1 in its place. Works on Windows
and Linux, so the cheat editor should be fine now.

Forgot to add assign / unassign key disable in the last WIP, so I took
care of that this time.

Added back the readme and license viewers. Used QTextBrowser, which
lets me use HTML formatting plus anchor hyperlinks. Not terribly
useful with such small documents, but meh. We can grow "readme" into
"documentation" in the future. Maybe even add a section listbox on the
left ala CHM files. Throw in a custom CSS stylesheet to make it
prettier. Whatever, not worried about it right now, but we'll get it
ironed out before v040 official.

Got too tired (Red Bull having no effect either), forgot to add the
.zip,.gz,.jma file extensions; and didn't check if cheat codes are
saving on Linux. Also need to work on getting window show commands to
put the windows in the foreground. If they're already visible, they
aren't raising to the top / gaining focus.

Still need to add a bunch of GUI hotkey bindings back, and I think
that'll do it for the rewrite. From there it's all adding stuff the
hiro port lacked.

[No archive available]
2009-02-14 10:05:00 +00:00
byuu
07c9df31a6 Update to bsnes v039r11? release.
Finally, a new WIP.

I redid the spacing / margins on all windows, it should match the old
bsnes/hiro port better now.

Removed all instances of QGroupBox, to work around the problem with
QGtkStyle ignoring the frame entirely, as well as getting around the
ridiculously large margin-top in it that you can't remove. Using
horizontal spacers in its place. Quite a bit more annoying to code
for, but it looks better than even the working frame, at least in my
opinion.

Modified the config panel listbox trigger to use currentRowChanged()
instead of itemSelectionChanged(). This fixes an annoying glitch where
if you clicked down on an item and dragged the mouse, it'd be off-by-
one in the list.

The code editor and cheat code panel both disable buttons when actions
aren't allowed, ala bsnes/hiro. There seems to be a bug in
QTreeWidget::itemSelectionChanged() on Linux, the returned
QTreeWidgetItem::isSelected() value is inverted. Too tired to work
around that tonight.

Improved automatic window resize for the input config and ROM add-on
cart loader windows. They should fully shrink as much as possible now,
rather than leaving blank space.

Dropped the Segoe Print font for titles, as it only looks good on
Vista+.

Removed the sort stuff from the cheat core class and hiro UI, since
the Qt UI can sort by header clicks.

Scale Nx items are checked again according to config file setting.

Stuff left to do:
- work around Qt/Linux bug on edit/delete enable on cheat code panel
- cheat codes don't seem to be saving to disk
- need to re-add screensaver disable code

FitzRoy, it's hard to show you the Qt rendering issues on GNOME, if
you're not familiar with how it should look ...

http://byuu.cinnamonpirate.com/temp/clearlooks.png
http://byuu.cinnamonpirate.com/temp/qgtkstyle.png

Clearlooks is the KDE default style. Looks good, but doesn't match
GTK+ apps.

QGtkStyle is the Qt wrapper that tries to use your GTK+ theme. Biggest
annoyance would be the buttons. There's this red box in the middle
that shows up when a button has focus. With the real GTK+, the entire
button turns red (no border) when you click it, but with just focus
alone it shouldn't have any color. The fonts are also much uglier,
like it has really poor anti-aliasing and slightly wrong sizes.

[No archive available]
2009-02-13 08:20:00 +00:00
byuu
c64232a479 Update to bsnes v039r10? release.
New WIP adds a ton of refinement.

I feel it's exceeded the old UI in quality already, so I added the
platform-functions (realpath, userpath, ...), so now it'll look for
the multi-user config file, falling back on single-user. If you use an
old config, most settings from v039 will be lost, but some will be
pulled in. It now looks for bsnes.cfg and style.qss (for theming.)
Slight issue with relative paths and realpath() on Linux. New
initargs() function adds back support for non-ANSI paths.

Path window shows <startup path (/path/used)> rather than just
<startup path>.

All buttons trigger on release (mouse up / off) rather than press
(mouse down).

Revamped the centering code. All windows respect the reserved screen
areas (taskbar, dock, etc) and center perfectly. They only center on
the first show, after that they will remember where you placed them.

Completely rewrote the windowed / fullscreen handling code. It works
properly even on Linux now. Scale max is great, perfect fit to the
edges of your screen sans reserved areas. If menu+status toggle are
bound to the same key, it'll only refresh the window once to reflect
the new state now.

Going back to the forced size thing. I need to re-add the menu checks.
You can't shrink the window smaller than your current settings, and if
you make it bigger, you get black borders (since I can't disable the
resize reliably on all platforms.) Makes more sense this way anyway,
the menu options should reflect what you see, not what the startup
state is.

It remembers the fullscreen setting automatically now. I took it a bit
further, though. If you have no ROM loaded, it will show the
menu+status in fullscreen to alert you there's no cart and give you a
chance to select one. I also re-added command-line loading, and if you
successfully load a game there, it will turn off the menu+status for
you. There was a slight delay there. You see, loading a game calls
snes.init() which needs the interface (video, etc drivers) setup.
Those drivers rely on the UI being created. So we have to make the UI,
setting the menubar visibility, before we can verify that we're going
to load a game.

_Yes, I can work around this!_ Add a first-run boolean and validate
the command-line path is valid, or separate cart load from SNES init
so I can load, setup GUI then start, etc etc. It's just annoying, not
sure if it's worth the effort to hide the menubar 2ms sooner.

ROM slot loader and cheat path windows now both disable buttons when
no cart is loaded. Major work in progress, lots of stuff left to do
here. When you pick a file with the ROM loader, it doesn't steal focus
to the main window anymore. When you pick a path, it clears the audio
buffer to prevent audio looping. Not sure if I want to hook move /
resize events, since Linux doesn't block as much as Windows. Maybe
I'll #ifdef it.

Qt 4.4 has a bug with GTK+ file open, if you give it a blank path it
spits out lots of errors. It needs a fully-qualified path. Going to
make my old-style "remember last selected path" thing that I used in
hiro/gtk to fix it later.

[No archive available]
2009-02-05 11:23:00 +00:00
byuu
85b08fd24b Update to bsnes v039r09? release.
New WIP re-adds the multi-part ROM loader. For some reason that took
way too long, all I got finished.

A bit different this time, one window for all three modes (bs-x
slotted, bs-x and sufami turbo.) It auto adjusts based on what you
want. Much more compact now that I can put the labels on the same line
as the controls.

It otherwise works the same. In the future, I'll be adding a Date/Time
control when loading pure BS-X carts. Makes no sense adding it to the
UI before the core supports it.

> [X] Pause emulation when main window does not have focus
> [X] Ignore input when main window does not have focus


For the hundredth time, that creates four states instead of three.
What's the difference between pause on + ignore on and pause on +
ignore off?

I'll most likely use a QScrollArea to put a scrollbar on the right if
we end up with too many advanced options for one page.

[No archive available]
2009-02-03 09:05:00 +00:00
byuu
3b3214d1be Update to bsnes v039r08? release.
New WIP.

I guess we've tested the container resize enough, at least for
Windows. Set fullscreen container color to pure black.

To avoid the accidental mouse assignments from v039 and earlier, I
went with UI buttons to assign mouse axes / buttons. Keyboard and
joypads assign the same as before. The extra 1-3 buttons are for six-
button mice like my MX518.

Also re-added mouse capture: load a game, and have a mouse/scope set
as an input device, click in the window and it captures. Press escape
to release. I blocked mouse buttons without capture now, too. That was
allowing a fire shot to go through in previous versions without it
when you first gained focus.

Fixed up hiro/GTK+ to compile again. Should give GNOME/Xfce/Qt4.4
distro packagers some reprieve for a while. Not going to be improving
it anymore, though.

Qt/Linux now uses pkg-config, rather than hard-coded paths. No such
luck for Windows users. There's a Win port of pkg-config, but not many
will have it so the path to Qt will remain hard-coded.

Ditched a few more global nall::string functions (count, find,
(q)replace, (q)split) and moved them inside classes. Fixed the
resultant compile errors in bsnes, hiro and xkas.

The rest of the nall::string functions are also useful on char*
arrays, eg strtr, strlcpy, trim, etc; so it doesn't make a lot of
sense to put them inside the string class.

Not entirely impressed with how the code looks mixing class functions
and global functions, but meh. At least it will reduce mistakes in
trying to pass char*s to string-only functions like replace.

[No archive available]
2009-02-02 08:56:00 +00:00
byuu
b5a38d2a07 Update to bsnes v039r07? release.
New WIP. Adds menubar/statusbar toggle, defaults fullscreen to max
scale with no menu/status (you can change the scale and it will
remember your settings in the future), and I re-added all the audio
panel options.

That leaves a few more GUI shortcut key assignments, mouse support +
binding, BS-X / ST ROM loaders, readme/license windows, and a few new
controls to replace the old Firefox-style advanced screen with
something more user-friendly. After that, the rewrite should be
complete.

Trying to move my string lib to a more OO-approach: removed overloaded
strcpy,strcat in favor of =,<< or .assign,.append. Will be trying to
remove more global functions (replace(foo -> foo.replace(, etc) in the
future. Taking it slow so I don't break xkas too badly.

I also want to shave as much excess functionality as I can from it.
Its main purpose is to be a streamable, implicit-castable alternative
to std::string with a few built-in special functions unique to my
needs (eg qsplit,qreplace.)

[No archive available]
2009-02-01 08:35:00 +00:00
byuu
94004f86ec Update to bsnes v039r06? release.
New WIP, looking for feedback on these changes.

First, I switched from a standard QWidget to a more semantically-
correct QMainWindow. Not much difference, except it adds an automatic
menubar and statusbar, no need to make my own. One advantage was free
status hint support without having to catch the event. So I took that
and redesigned the status system.

First, the game name on the status bar ate up too much space for
nothing. I moved it to the titlebar: bsnes v0.nnn - Game Title (U)

Second, I merged the FPS counter with the system state and put it on
the right-hand side of the status bar. It shows "No cartridge loaded",
"Power off", "Paused" and the framerate. This is persistent and always
visible. FPS doesn't show ideal FPS next to it anymore. That just
wastes space.

Third, the new left-hand stuff. It uses the native QStatusBar support
for timed messages. I use that to pump power state changes ("System
was reset.", "Loaded Star Ocean (J), and applied UPS patch.", etc.)
They go away after ~3 seconds. Unsupported special chip warnings now
pop up a modal dialog box instead of showing in the status bar.

Fourth, we can now set special menu group / item descriptions that
appear when the items are hovered. For instance, mouse over
settings->video mode->ntsc and it explains that the setting affects
the perceived video output size, rather than the core emulator mode.
The descriptions there now suck, but it shows off the concept. We'll
leave them off for all the obvious items.

With all of that, I was able to kill off the "Status" class, ~4kb of
nasty code that polled the time constantly and maintained an internal
string queue for statusbar messages.

Also new to this WIP ... it's apparently not trivial to set a fixed
window size with Qt on Xlib. My MinimizeWindowHint that worked on
Windows was making the window top-most on Xfce, and breaking
fullscreen mode.

So, I tried again to write code that could properly switch between
windowed and fullscreen mode. For some reason, this always causes tons
of problems. Window managers like to take their sweet ass time
updating internal states, so rapid geometry changes often fail,
leaving the window in odd positions and sizes.

It took quite a while, but I have it working, hopefully, 100% on
Windows. I even account for the desk area (ignoring the taskbar and
such) and the window decorations. Centering should be truly perfect,
and scale max should be a pixel-perfect fit to all available screen
size, while maintaining the ratio.

Linux support is still kind of flaky, though. Long shot, but any
knowledgeable help here would be appreciated.

    void Utility::updateFullscreenState() {
      if(config.video.isFullscreen == false) {
        config.video.context = &config.video.windowed;
        winMain->window->showNormal();
        application.processEvents();
      } else {
        config.video.context = &config.video.fullscreen;
        winMain->window->showFullScreen();
        application.processEvents();
      }

      //refresh options that are unique to each video context
      for(unsigned i = 0; i < 2; i++) resizeMainWindow();  //call
    twice as Xlib drops window messages sometimes
      updateHardwareFilter();
      updateSoftwareFilter();
    }

    //if max exceeds x: x is set to max, and y is scaled down to keep
    proportion to x
    void Utility::constrainSize(unsigned &x, unsigned &y, unsigned
    max) {
      if(x > max) {
        double scalar = (double)max / (double)x;
        y = (unsigned)((double)y * (double)scalar);
        x = max;
      }
    }

    //0 = use config file value, 1+ = override with new multiplier
    void Utility::resizeMainWindow(unsigned multiplier /* = 0 */) {
      if(multiplier != 0) config.video.context->multiplier =
    multiplier;
      else multiplier = config.video.context->multiplier;

      unsigned width  = 256 * config.video.context->multiplier;
      unsigned height = (config.video.context->region == 0 ? 224 :
    239) * config.video.context->multiplier;

      if(config.video.context->correctAspectRatio) {
        if(config.video.context->region == 0) {
          width = (double)width * 54.0 / 47.0 + 0.5;  //NTSC adjust
        } else {
          width = (double)width * 32.0 / 23.0 + 0.5;  //PAL adjust
        }
      }

      QDesktopWidget *desktop = QApplication::desktop();

      if(config.video.isFullscreen == false) {
        //get effective desktop work area region (ignore Windows
    taskbar, OS X doc, etc.)
        QRect deskRect = desktop->availableGeometry();
        unsigned deskWidth  = (deskRect.right() - deskRect.left() +
    1);
        unsigned deskHeight = (deskRect.bottom() - deskRect.top() +
    1);

        //place window offscreen so resize events do not cause
    flickering
        winMain->window->move(desktop->width(), desktop->height());
        application.processEvents();

        //shrink window as much as possible to compute frame + menubar
    + statusbar size
        winMain->canvas->setFixedSize(0, 0);
        winMain->canvasContainer->resize(0, 0);
        application.processEvents();
        winMain->window->resize(0, 0);
        application.processEvents();
        QRect frameRect = winMain->window->frameGeometry();

        //constrain window so that it will fit inside desktop work
    area
        constrainSize(height, width, deskHeight - (frameRect.bottom()
    - frameRect.top() + 1));
        constrainSize(width, height, deskWidth  - (frameRect.right() -
    frameRect.left() + 1));

        //resize canvas to desired size
        winMain->canvas->setFixedSize(width, height);
        application.processEvents();

        //shrink window so that it contains all of canvas, but is no
    larger
        winMain->window->resize(width, height);

        //allow canvas to be resized along with window by user
        winMain->canvas->setMinimumSize(256,
    config.video.context->region == 0 ? 224 : 239);
        winMain->canvas->setMaximumSize(desktop->width(),
    desktop->height());
        winMain->canvas->setSizePolicy(QSizePolicy::Expanding,
    QSizePolicy::Expanding);
        application.processEvents();

        //force window size change to take effect
        winMain->window->resize(width, height);
        application.processEvents();

        //center window onscreen:
        //take desktop work area and window frame decorations into
    account
        QRect windowRect = winMain->window->frameGeometry();
        unsigned windowWidth  = (windowRect.right() -
    windowRect.left() + 1);
        unsigned windowHeight = (windowRect.bottom() -
    windowRect.top() + 1);

        winMain->window->move(
          deskRect.left() + (deskWidth  - windowWidth ) / 2,
          deskRect.top () + (deskHeight - windowHeight) / 2
        );
      } else {
        constrainSize(height, width,
    winMain->canvasContainer->size().height());
        constrainSize(width, height,
    winMain->canvasContainer->size().width());
        winMain->canvas->setFixedSize(width, height);
      }
    }


If anyone wanted to get stupid, a style for QWidget.backdrop {
background: url(border.png); } when designed for a specific resolution
+ scaling mode would allow Super Gameboy-style borders :P

Let's see ... properly subclassed the generic input binding pools for
clarity, and added user interface key binding support again. So far
only for exit emu + toggle fullscreen, but the rest should be easy
now.

I can't reduce the space for the QFrameWidgets. Only setMargin works,
but it reduces margins on all sides where only the top is bad. I may
have to revert it back to a section label + horizontal separator
between each area. Probably a good idea, QGtkStyle doesn't support
QFrameWidget's decoration anyway. Looks terrible on GNOME.

Finally, fixed ui_hiro for Windows. Still need to fix up the Linux
target. They share the same Makefile, so additional targets should be
easy, eg a pure SDL port or whatever.

> Darn. Oh well, guess I could keep whatever I concoct to myself.


Or tell me what you want to do, as I probably won't mind :P

[No archive available]
2009-01-27 07:24:00 +00:00
byuu
148bbddb1a Update to bsnes v039r05? release.
Man, I don't have time to read all that ... >_>;

New WIP. Lots of UI refinements.
- re-added power on / power off / reset to main menu (expansion port /
region won't be coming back here)
- re-added status message system
- figured out a way to hide the child indicators in list boxes, as
well as enable sorting while starting with default ordering (so
headers are now clickable to sort, you can even rearrange them)
- merged driver settings and input focus policy into advanced panel
- old advanced panel list is dead, driver panel is dead
- replaced scale 5x with scale max; minor help to 1920x1200+
resolutions
- re-added smart scaling + window size clamping
- Linux port should build out-of-the-box, but there's definitely some
issues in regards to window sizing (even Qt has trouble with this)
- new $(ui)/Makefile system -- as if I weren't abusing GNU make enough
before, new automoc rules are madness -- fear:
    # automatically generate .moc files from .hpp files whenever:
    # - they don't exist
    # - .hpp file was modified after .moc file
    %.moc: $<; $(moc) $(patsubst %.moc,%.hpp,$@) -o $@
    $(foreach object,$(moc_objects),$(eval $(object): $(patsubst
    %.moc,%.hpp,$(object))))
    ui_build: $(moc_objects);
    ui_clean:; -$(foreach object,$(moc_objects),@$(call
    delete,$(object)))

- lots of other crap

http://byuu.cinnamonpirate.com/images/b ... 090126.png

Now to update the locales for v039 finally ...

[No archive available]
2009-01-26 09:59:00 +00:00
byuu
e5b2e87ff8 Update to bsnes v039r04? release.
Well that wore me out ... the UI went from 45kb to 109kb in one night,
with no copy/pasting.

New WIP:
- re-added the InputManager + InputDevicePool classes. The latter is
very complicated, but impressive
- re-added Input Configuration Editor
- re-added Cheat Code Editor
- re-designed individual cheat code editor
- re-added Path Editor
- stopped subclassing QWidget w/Q_OBJECT to work around Qt stylesheet
bug
- re-added controller port selections

Sorting by column header clicking is screwy. It has to be manually
enabled, and the second you do that it re-orders everything. This is
really bad when you want the default order, eg "up, down, left ..." or
your default cheat ordering; so I had to leave it off. Would be too
tacky to add a numeral ID column to work around that.

Seems Qt also has a ridiculously complex tree view (MVC-based), but
thankfully they added a simplified version that works well enough,
QTreeWidget. Only problem is I can't seem to make it hide the child
expander space at the very left-most side. This creates an annoying
little gap. Anyone know how to hide those with Qt?

Even got checkboxes inside the list to toggle cheat codes.
Documentation could've been clearer there.

Speaking of which, I was able to use child nodes on the cheat code
list to show each individual cheat code, but it just didn't look right
to me. There was a ton of blank space on the sides. I can actually
fill in multi-line descriptions as well here, but it still looks
really tacky in my opinion.

Thought about using add code + append code + delete code and putting
the textboxes back, but that just seems tacky and error prone, too.
I'm not adding individual descriptions for each code sub-part.

Only way I can think to make it work that way would be to replace the
multi-code method with a grouping affinity (eg group codes 1+3 into a
set), but then we're getting really complex, with a minimum of 5-6
buttons on the window and 3 text boxes. I think the learning curve
would be too high to be worth it.

So, I used the old method, but instead of a textbox to paste in codes,
I went with a slightly less error prone method of a textbox for the
description and a listbox for each code part. Threw in add / delete /
delete all for the code list. Takes a bit longer if you're trying to
copy/paste codes off the web, but the increased intuitiveness and
consistency is worth it in my opinion.

New cheat code editor (description typo due to extreme fatigue)

There's a lot of rough edges and few safety checks, so if you try to
break things you probably can.

Overall, really having fun with the Qt API. It can be awkward at
times, but it's definitely the most straight-forward API I've seen so
far.

[No archive available]
2009-01-25 08:16:00 +00:00
byuu
67318297dd Update to bsnes v039 release.
Changelog:
    - Recovered ~10% speed loss from last release via S-CPU IRQ timing optimizations
    - Implemented O(1) binary-heap priority queue for event scheduling
    - Fixed a bug where BS-X slotted carts were never mapping SRAM
    - Fixed a bug where invalid controller input was always being allowed
    - Fixed all compilation warnings with GCC 4.3 and Visual C++ 9.0
    - Added advanced options to control S-CPU ALU hardware delays
    - S-RTC and SPC7110 timers updated to handle time_t overflow (Y2k38) gracefully
    - Cheat codes can now have multiple codes per entry, and multiple lines per description
    - Rewrote config file parser; removed config/ class from emulator core
    - Windows: added 256x256 image to program icon set
    - Linux: fixed Xorg keysym mapping, key names should show correctly in all cases now
    - UI: updated video panel, added fullscreen-on-startup and NTSC merge fields options
    - UI: simplified audio panel
    - UI: boolean options on advanced panel can be toggled via double-click
    - Lots of code cleanup, especially for S-CPU IRQ handling and nall template library
2009-01-18 10:21:22 +00:00
byuu
1a6de37454 Update to bsnes v038r13? release.
<edit: removed outdated WIP>

**Delta queue support**

First up, I've added a binary min-heap delta queue. I converted all
events except IRQ/NMI test and hold. If we can convert these to use
the delta queue, there should be a speedup of 30-40% or so -- pretty
much the biggest low-hanging fruit there is. And the thing that has
plagued me for 12-18 months in the past before the major speed hit
v0.018 when I gave up and went with testing IRQ/NMI on every single
clock tick.

But it won't be easy: the delta queue works by adding an event when
you know its going to trigger. But we cannot _know_ if an IRQ or NMI
interrupt will trigger until we're at the current time. One can
literally disable or change these 2 clocks before they occur, which
would leave a bad trigger event in our queue.

IRQ/NMI hold also needs to be scheduled exactly four clocks after
IRQ/NMI trigger. Unless we queue these at least ~16 clocks in advance
of the trigger, then we may not be able to trip them exactly when
needed.

Since the test/hold are in the same inner loop, before or after the
delta queue time update, we can't just enqueue the hold and not the
test.

So, in the WIP I've included my insanely rigorous test ROMs for IRQ,
NMI and HDMA timing, and I'm asking for help. If anyone could please
help in merging sCPU::add_clocks() IRQ testing into the delta queue,
I'd be greatly in their debt.

Relevant code is at src/cpu/scpu/timing/[timing.cpp, irq.cpp] and
src/cpu/scpu/deltaqueue.cpp.

I'll be working on it as well, of course.

Note: removing events not at the top of the heap is not supported.
_If_ this is needed, it would probably be best to do an O(n) search
for the event, and overwrite the event code with 0 (meaning ignored)
than to try and pull out the event and renormalize the heap. IRQ/NMI
hold edge cases are very rare, so O(n) time shouldn't hurt speed.

**ALU delay**

Since there's no speed hit anymore, I added back hardware ALU (mul /
div) delays. While we still don't emulate the proper partial
calculation results, we should at least return 0 when reading too
soon.

The exact delay varies based upon the calculation, however. We ran
into problems with Taz-Mania in the past. So for this WIP only, I've
added settings to the advanced panel:
"temp.alu_mul_delay" + "temp.alu_div_delay"

The value has to be a _multiple of 2_ (2, 4, ... 32, 34, ...), and the
goal is to find the _highest_ possible value that will not cause any
bugs in games.

What I'm asking is for people to just set the value to something and
test a few games. If you spot a bug that's not in v038, try lowering
the value until it goes away. Then post the values here. We'll keep
lowering the current number until we find the best setting for future
releases.

Let's start with really high values that will definitely cause bugs:
ALU mul delay = 104
ALU div delay = 208

For example, pick any game ... say Zelda 3. Note how the triforces
won't render now. Lower the value until it works, post what numbers
you needed here plus the game name. Then everyone will use those
values and test other games. Rinse and repeat.

_Important note:_ you have to reset the game after changing these
values in the GUI for them to take effect.

**Fullscreen on startup**

I've added "video.start_in_fullscreen_mode". Because there's no way to
exit other than a keyboard shortcut, I've unhid the "Exit" option for
now. We can discuss the UI design stuff in the main v038 talk thread,
just stick to mentioning if you hit any bugs with it for this thread.

Thanks to all in advance for any help here!

[No archive available]
2009-01-02 12:01:00 +00:00
byuu
de47a2c7de Update to bsnes v038r12? release.
New WIP adds nothing new, but fixes Visual C++ compilation issues.
Stopped windows.h from defining min/max again, disabled (bool)intmax_t
stupidity, added a default: so VC doesn't assume a function has a
blank return path, omitted -static on libco, and reverted to always
using windres over rc. Express Edition lacks rc, and you already need
GNU make anyway, so why bother supporting rc, too?

> Can you tell me what I should include?


It looks like the taskbar is only 32x32 ... yet the result looks
really weird. Almost like the .ico file only has a 1-bit transparency
mask or something :/

Image

As you can see, all the other icons look much sharper.

> I always wondered why the entire line of an entry doesn't highlight.


I have no idea ... don't see any other listview styles I can use
that'd highlight the whole thing :/

[No archive available]
2009-01-13 15:12:00 +00:00
byuu
25ad9701ab Update to bsnes v038r11? release.
New WIP.

- invalid input is blocked again when input.allow_invalid_input ==
false
- vertical scrollbar only appears when needed in multi-line textboxes
- cheat editor properly encodes / decodes quotes and line breaks
- advanced panel now allows double clicking boolean items to toggle
their state
- cleaned up all of the nall template library
- nall::array was missing copy constructor, causing swap/sort to fail
- moved start in fullscreen to advanced panel for now
- renamed most of the options FitzRoy asked for

> Invalid input is always allowed in bsnes. The config file option
> doesn't change that.


Thank you very much, that was a huge oversight.

> In the latest WIP I've notice Pro Action Replay codes aren't working
> anymore. For example, try these codes for Super Mario World (U);


Those work fine for me ... maybe try the next WIP?

> Here's a couple of boolean advanced options I'd like to see:

> misc.minimize_to_system_tray
> misc.run_at_system_startup


System tray control is probably something the GUI library needs
anyway, but its value is completely lost for Windows 7 -- the taskbar
works similar to the system tray + quick launch. In fact, by default
tray items are hidden and require you to go through a menu to get to
them.

Run at startup would be tricky. I could only get that working on
Windows, and it's really something the user should do externally. Drag
it to the startup folder, put it in the registry, use MS config,
whatever. Also seems very niche, no? You'd still have to load a game
for it to be useful.

> maybe the two file ones as well, not sure what use those have


One is for OS X users. Some of them don't understand file extensions.
The other is for ROM hackers. It'd be needed to multi-chain UPS
patches in the future, as well.

> I'd also like a minor change in the system menu: flip the power
> settings with the controller settings.


Why? Seems arbitrary, and I like the current ordering. We can even
make up some crazy stuff to support the current ordering:

1) Looking at an SNES from top to bottom, you have the cart slot, then
power / reset, then controllers.

2) Group options that affect carts, then group options that affect
input.

> Let me know when you're ready to talk about the readme overhaul.


Will probably release v039 next weekend. Can work on the readme for
v040, I guess.

[No archive available]
2009-01-12 14:44:00 +00:00
byuu
9a5a3b8246 Update to bsnes v038r10? release.
Probably a mapping issue. Wish we could've spotted it less than 21
versions ago, would've been easier to find the regression. Ah well, at
least we found it now.

New WIP completes the multi-part cheat codes. I changed the file
format, and it may change again, so backup your old .cht files first.

Went with the unified textbox thing to allow infinite number of codes
per cheat item, though the textbox itself will stop parsing after
1,024 bytes at the moment. Really ... you're doing something wrong if
you need more than ~120 parts for one cheat code entry.

It will parse and treat spaces, +&|,;{tab} and {linefeed} as
separators for codes. You will lose the space formatting after you
okay the code and go back to edit it again.

Also one glitch if you toggle cheat status, it won't clip the extra
cheat parts as it should. Will fix it later, ran out of time. Don't
try multi-line descriptions or commas for separators just yet. Need to
iron proof that so it won't corrupt the file format.

Any testing of this new feature would be greatly appreciated.

Design questions:

- should we change the order of desc/code/enablestate on either the
main cheat window or the cheat sub-editing window? If so, why? Be
verbose, use examples.
- should we change the .cht file format? Again, please clarify what
the advantage would be.
- should we change the text labels for the sub cheat editor to
something more clear?
- should the default separator be changed from " + " to something
else? Maybe linefeed?

[No archive available]
2009-01-09 16:18:00 +00:00
byuu
daac76858b Update to bsnes v038r09? release.
Damn, absolutely loving this Aftershock I just picked up. Scary stuff
-- 80 proof and it tastes like a malt beverage.

New WIP, added the cheat code editor UI changes. The cheat code class
in the back-end still doesn't actually support multiple codes just
yet, but it will.

Image

Need to decide how many codes we should allow. A real Game Genie
didn't allow more than five, so I think we should go with either four
or six.

Also not shown, when a code you're editing is incomplete / bad,
there's a grayed out text label that appears on the right to tell you
that the code is invalid. It also disables the ok button during this
time.

I wouldn't try entering a multi-line description just yet. I don't
parse that at all. Worst case, it'll corrupt your cheat file. My plan
is to only show the first text line in the listbox, but allow extra
lines for more verbose comments.

I'm being lazy and disabling the add/edit/delete buttons from the main
window when the sub editor window is open. Prevents abuses like
deleting the code you're editing, then trying to update it.

[No archive available]
2009-01-06 15:58:00 +00:00
byuu
c63df7e009 Update to bsnes v038r08? release.
Another WIP, but nothing visible to end users. Still get it if you
don't have 07 for the nice speedup.

Mostly source-cleaning stuff.
- removed 'uint' type, replaced all instances with the proper unsigned
int.
- removed as many headers as I could from the global interface.hpp
file, including only in the cores that need each of them. Should help
compile time. Though I still have a lot of global header includes due
to needing ultra-hot sections of code inlined.
- added include protection bumpers to the CPU+SMP opcode core
generated files
- added const-correctness to a few more classes.
- updated S-RTC and SPC7110 time to handle time_t overflow: it's now
Y2K38 proof even on 32-bit signed time_t systems, and the file format
remains unchanged. But it adds one limitation that you'll lose your
time if you wait ~34 years before loading your last save game. I think
that's reasonable for now. Once 64-bit time_t systems are ubiquitous,
we should be able to trivially expand that without breaking old saves.

Relevant code (I tested with int16_t, uint16_t, int32_t, uint32_t,
int64_t and uint64_t):

      time_t diff
      = (current_time >= rtc_time)
      ? (current_time - rtc_time)
      : (std::numeric_limits<time_t>::max() - rtc_time + current_time
    + 1);  //compensate for overflow
      if(diff > std::numeric_limits<time_t>::max() / 2) diff = 0;
    //compensate for underflow


Avoided the obvious (y-x)&<time_t>::max() just in case there's some
crazy platform where the value != (some power of 2)-1. Modulus
(max()+1) won't work there either, as it'll overflow if
sizeof(unsigned) == sizeof(time_t). The +1 might throw it off by a
second on one's complement system, but I don't really care :P

Anyone with GCC 4.3 want to try something for me? Try modifying
src/lib/nall/platform.hpp and change #define alwaysinline
__attribute__((always_inline)) to:
    #define alwaysinline __attribute__((always_inline))
    __attribute__((hot))


... and let me know the FPS difference you get in some arbitrary game,
please :D

It's supposed to be like manual-PGO.

[No archive available]
2009-01-05 12:33:00 +00:00
byuu
3908890072 Update to bsnes v038r05? release.
New WIP, this one's fairly big as nightlies go.

First, moved the priority queue to a generic implementation so I can
re-use it elsewhere in the future. Took a ~1% speed hit or so by using
functors for the callback and using the signed math trick to avoid the
need for a normalize() function. Sadly it gets up to 3% slower if the
priorityqueue class code isn't placed right next to the CPU core.

Second, while I failed miserably at using the queues for IRQ / NMI
testing, I did come up with a neat compromise. NMI is only tested once
per scanline, IRQs only have PPU dot precision (every 4 clocks), the
hold time for both is four clock cycles, and scanlines for both NTSC
and PAL, even on the short colorburst scanline, are always evenly
divisible by four.
... so testing every 2 clock cycles was kind of pointless, as it'd
always be false. Since the delays between the PPU counter and CPU
trigger for NMI is 2, and IRQ is 10, they even align again with an
offset of 2.
... hence, I can call poll_interrupts() half as often by using
if(ppu.hcounter() & 2). I reverse that for the Super Scope / Justifier
dot testing and cut their overhead in half as well.

That gives us a nice ~10-15% speedup. Nowhere near the idealistic
~30-40% for range tested IRQs, because that only actually tests once
per scanline (~1364 cycles). This just cuts ~682 tests down to ~341
tests. Still, it's pretty close to half as good while still being
super clean and easy. It greatly diminishes the value of a range-based
IRQ tester, as that will only offer a ~15-20% speedup now at best.
Getting PGO working again is the new lowest-hanging fruit.

I also eked out a tiny bit more speed by adding some previous missed
"else" statements in the irq_valid testing part.

With the newfound speed, I gave a tiny bit up (1-2%) to simplify and
improve some old edge cases. It's known that IRQs won't trigger on the
very last dot of each field. It's due to the way the V and H counters
are misaligned, that we can't easily emulate.

So before I had a bunch of cruft to support that, update_interrupts()
was called at the start of each scanline, which would call irq_valid()
to run a bunch of tests to make sure the latch positions would
actually work on hardware. Writes to $4207-420a would also call the
update_interrupts() proc.

I killed all that, and now compute the HTIME position inline in
poll_interrupts(), and perform the last dot check there. Since testing
is ten clocks behind anyway, then we need only check to see if VTIME >
0 and ppu.vcounter(-6 clocks) == 0 to know that it was set for the
last dot on any given field.

This gives us two nice perks for free: one, no more need to hard-code
scanlines/frame inside the CPU core; and two, the old version was
missing an edge case in interlace mode where odd fields would allow an
IRQ on the last dot, which was simply because my old irq_valid() test
didn't have a third condition for that.

All that said, I'm getting ~157.5fps instead of ~137.5fps now in Zelda
3.

Third, I removed grayscale/sepia/invert from the video settings panel,
and stuck them in advanced. Used the new space to add checkboxes for
NTSC merge fields and the start in fullscreen thing.

Reference:
    //called once every four clock cycles;
    //as NMI steps by scanlines (divisible by 4) and IRQ by PPU
    4-cycle dots.
    //
    //ppu.(vh)counter(n) returns the value of said counters n-clocks
    before current time;
    //it is used to emulate hardware communication delay between
    opcode and interrupt units.
    alwaysinline void sCPU::poll_interrupts() {
      //NMI hold
      if(status.nmi_hold) {
        status.nmi_hold = false;
        if(status.nmi_enabled) status.nmi_transition = true;
      }

      //NMI test
      bool nmi_valid = (ppu.vcounter(2) >= (!ppu.overscan() ? 225 :
    240));
      if(!status.nmi_valid && nmi_valid) {
        //0->1 edge sensitive transition
        status.nmi_line = true;
        status.nmi_hold = true;  //hold /NMI for four cycles
      } else if(status.nmi_valid && !nmi_valid) {
        //1->0 edge sensitive transition
        status.nmi_line = false;
      }
      status.nmi_valid = nmi_valid;

      //IRQ hold
      status.irq_hold = false;
      if(status.irq_line) {
        if(status.virq_enabled || status.hirq_enabled)
    status.irq_transition = true;
      }

      //IRQ test (unrolling the duplicate Nirq_enabled tests causes
    speed hit)
      bool irq_valid = (status.virq_enabled || status.hirq_enabled);
      if(irq_valid) {
        if((status.virq_enabled && ppu.vcounter(10) !=
    (status.virq_pos))
        || (status.hirq_enabled && ppu.hcounter(10) !=
    (status.hirq_pos + 1) * 4)
        || (status.virq_pos && ppu.vcounter(6) == 0)  //IRQs cannot
    trigger on last dot of field
        ) irq_valid = false;
      }
      if(!status.irq_valid && irq_valid) {
        //0->1 edge sensitive transition
        status.irq_line = true;
        status.irq_hold = true;  //hold /IRQ for four cycles
      }
      status.irq_valid = irq_valid;
    }

[No archive available]
2009-01-04 15:41:00 +00:00
byuu
155b4fbfcd Update to bsnes v038r04? release.
New private WIP. Nothing worth downloading it over, really.
- fixed first scanline DRAM refresh event (passes irq.smc and nmi.smc
again)
- fixed PPUcounter to initialize before CPU; not that it affected
anything as-is, but it's nice for future proofing to do it right
- optimized priority queue thing to move instead of swap; didn't
affect overall emu speed sadly (still infinitesimally faster than the
last official release), but I still like the model for timing events
that will occur no matter what
- made the ALU delays more permanent advanced config options; 32 and
48 were still screwing with taz-mania ... not even a whole opcode on
the mul -- that game literally reads the regs immediately. We can't
get things any better than we already have until we emulate the
formula; so I set them both to 2 clock cycles for now, they're at
least there for hobbyist devs, who can set them fairly high to
guarantee their code would work on hardware
- removed a bit of cruft

> * RSA-1024 is busted


Really? What are its factors, then? Please tell me in private so I can
claim the $100,000 bounty when it's offered again :D
(they've only broken a 200-decimal digit one with the equivalent of 75
PC work-years, RSA-1024 has 309 and the problem is exponential, not
linear.)

[No archive available]
2009-01-03 15:26:00 +00:00
byuu
02ca0f1e69 Update to bsnes v038r05 release.
[No changelog available]
2009-01-02 20:13:50 +00:00
byuu
6cacb2517a Update to bsnes v038r03? release.
I haven't posted the new WIP, just updating on the status of it.

First, I noticed that Xorg changed the keycodes, at least for Kubuntu
8.10. belegdol, the other person at RPM fusion was mentioning that he
was getting weird key mappings like page_down for left, etc -- this
would be why. Didn't realize they were variable like that. I went back
and made a lookup table to convert the official keysyms to keycodes,
so this issue should now be fixed. Anyone packaging bsnes is free to
update to the latest WIPs to fix this if they like.

Second, I added "adjust" to brightness/contrast/gamma, and they all
start at 0% centered, go to -95% and +95%. Still not sure what to name
"Frequency adjust", so I left that alone for now.

Third, I updated the ~400 or so %0.nx sprintf statements to %.x, so
that GCC 4.2+ will shut the hell up.

Lastly, I can't come up with a good double->string conversion routine
(causes subtle rounding errors with the obvious approach), so I
wrapped strdouble() around snprintf. bsnes doesn't even use it yet,
but at least it can now ...

> How would dropdowns be better than what ZSNES is currently using?


The WIP link on Rapidshare is dead ... what are they using? If it
doesn't involve tab panels, then I can do that.

> Wouldn't these just be hardware filters like NTSC that simulate the
> lossy characteristics of certain type of analog output?


These are settings _for_ the NTSC filter to affect its quality. They
don't affect any other filters.

> There's no fundamental difference between a coprocessor and central
> processor in the scheme of emulation. That the coprocessor happened
> to be located on what we would physically categorize as the
> "cartridge" is immaterial.


There's quite a large distinction between something inside the SNES
and outside. I understand where you're coming from, but we shouldn't
pretend as though the SNES contains all these chips, either.

Sheesh, I don't even know what we're discussing here anymore :P

> You'd be crazy to externalize all your code just to allow people to
> create imaginary 10ft boards with 2ghz GPUs.


What I wouldn't give for just one person to make such a board ... :D

> The only invaluable option in that entire section is overload's
> gamma curve, everything else about the image can be destroyed in my
> video driver or monitor settings.


Haven't we covered this in the past? SNES games were played with
gamma, etc settings calibrated to NTSC / PAL televisions. Monitors are
calibrated very differently. I doubt anyone wants to go into their
driver control panels to adjust these settings every time they start
and close the emulator. And cheaper drivers (especially on Linux) may
not have these options at all.

Not saying we have to go crazy here ... I'm happy to leave out
hue/saturation settings.

> I am aware that any changes made to WIP releases are posted here on
> this forum, but maybe it's an idea to start including those as well
> on the WIP download page?


I _could_ ... but it's easier to type things up here later on at my
convenience :/

[No archive available]
2008-12-28 09:55:00 +00:00
byuu
9a8203b3c3 Update to bsnes v038r02? release.
New WIP.

- defaults are now centered for video settings panel sliders, modified
default gamma to 100 with gamma curve enabled.
- removed all the preset buttons, it looks terrible with just one.
- fixes 99% of the useless bullshit warnings with GCC 4.3, still
didn't change all the "%0.2x->%.2x" strings in the disassemblers
though.
- fixed up the double->nall::string conversion, but it still has some
rounding issues, so I can't use it yet. About ready to just implement
that as a wrapper around sprintf.

> Byuu i would like to request support for the following audio
> renderers.


Sure, you can post them here when you're done and I'll include them in
the source. If they don't cause missing driver errors on a clean
install of Win2k SP4 or newer (this is why Win/OpenAL is disabled),
then I'll enable them in the default binary as well.

[No archive available]
2008-12-22 13:20:00 +00:00
byuu
9c7ac24ff7 Update to bsnes v038r01? release.
New WIP. Audio panel was revised, it's now the same both in regular
and advanced mode.

Volume, Frequency and Latency all appear on one row and are all combo
boxes with sane defaults. Advanced mode gives them additional options.

Frequency adjust remains a slider. Given that 1 tick can mean the
difference between frame stuttering once a minute and once an hour, I
think it's worth keeping the precision.

Code-wise, I merged the ppucounter object into the PPU class (through
inheritance). This results in the following code simplification:

Before:
    ppucounter.vcounter()     //S-CPU time
    ppucounter.ppuvcounter()  //S-PPU time


After:
    ppu.vcounter()  //S-CPU time
    ivcounter()     //S-PPU time (called inside its own class, no need
    for ppu. prefix)


i just stands for "internal". It was that or slow things down with a
co_active() check inside the counter read calls.

Man, it feels weird editing C++ code after all of that CSS magic. I
find myself wanting to write a pattern-matching rule ...

    uint16 PPUcounter::vcounter() {
      return cpu_vcounter();
    }

    uint16 PPUcounter::vcounter() [class="PPU"] {
      return ppu_vcounter();
    }


> I probably would have stuck it in a carefully-styled <SPAN> rather
> than an attribute, but I notice your approach is sanctioned by HTML5
> (or at least it would be if you called it "data-date" instead of
> "date").


    <h3><span>2008-12-20</span>Title</h3>
    <blockquote><p>All that is necessary for the triumph of evil is
    that good men do nothing<span>Edmund Burke</span></p></blockquote>


Could work ... looks weird, though. Adding a class type to the spans
to state what they are makes it even more bloated, but perhaps worth
it ... hmm.

HTML5 approach looks cool, too. data- prefix isn't too bad. A good
indicator that it's not a real tag.

EDIT: oops, looks like I forgot that IE6 can't handle the text-align
attribute properly, either. Eh, I'll fix it tomorrow. Tired now.

[No archive available]
2008-12-20 11:36:00 +00:00
byuu
c13ae98863 Update to bsnes v038 release.
- eliminated S-DD1 DMA enslavement to the S-CPU; this allows the S-DD1 to behave more like the real chip, and it also simplifies the S-CPU DMA module
    - eliminated S-PPU enslavement to the S-CPU; all processor cores now run independently of each other
    - added cycle-level S-PPU timing for OAM address reset and OBSEL; fixes scanline glitches in Mega Lo Mania and Winter Olympics
    - removed ppu.hack.* settings; as they are no longer needed due to above changes
    - corrected VRAM tiledata cache bug; fixes Super Buster Bros v1.0 reset glitch
    - added memory export and trace logging key bindings to user interface
    - removed WAV logging (to trim the emulation core)
    - embedded readme and license texts inside executable
    - simplified S-CPU, S-SMP flag register handling
    - source code cleanup for S-CPU timing module
    - GUI-Linux: added style improvements to the listbox and combo box controls
    - GUI-Linux: finally added filetype filter support to the file open dialog
    - GUI-all: shrunk configuration panel [FitzRoy]
    - GUI-all: modified paths panel descriptions for clarity [FitzRoy]
2008-12-15 16:19:04 +00:00
byuu
e370a35d7d Update to bsnes v037r07? release.
New WIP.

The biggest news is that I've implemented what I was discussing
earlier, and it worked perfectly. The S-PPU enslavement to the S-CPU
is no more.

As of this point, all four processor cores, and all three of their
shared relationships, run completely independently of one another.

This required moving the inline timing code from the absolute most
timing-sensitive section of the emulator, to an entirely new external
class. It also required logging more state data, adding ~100k/second
more context switches, etc. It was unavoidable that the new approach
would be slower, but I was able to greatly mitigate the speed loss.
Right now, it stands at a ~6-8% speed loss from the previous release.

But there is good news:
1) aside from SuperFX / SA-1 support, which will require additional
processing inside the emulator core, no other changes should slow down
the emulator again. It can only get faster from here. Most
importantly, a range-based IRQ tester would offer a major speedup.
2) this approach will allow both a scanline-based and cycle-based
S-PPU core to work with only one S-CPU core. No need to subclass and
duplicate the timing code + scheduler as I was planning to before.
3) with this change, I was finally able to convert the scanline-based
S-PPU renderer to a hybrid that I've talked about with FitzRoy in the
past: this allowed me to finally cache OBSEL writes at (roughly) the
appropriate position, while still rendering the screen at a different
point. I render the screen at H=512, and cache OBSEL at H=1152. May
not be hardware accurate, but it allows Adv. of Dr. Franken + Winter
Olympics + Mega Lo Mania to all work as expected, all at the same
time.

It wasn't 100% exactly how I wanted to do things ... but I'm really
happy about this de-coupling. I've always been a purist when it comes
to implementing processor cores independently of one another, and it's
always bothered me greatly the way the CPU controlled the PPU and its
counters.

With the above changes, I've eliminated the four ppu.hack config
settings. I don't see much of a need for them.

I've also embedded the readme and license text files. FitzRoy, I
haven't had a chance to revise the readme as you were suggesting yet.
Not ignoring you there, it's just low on my priority list right now.

Lastly, I took FitzRoy's advice, and removed the WAV logger entirely.
I'm also going to leave the screenshot capture out. At least for now
... the UI is starting to get a bit too bloated for my tastes.

This is also the first uploaded WIP with the new debugging key-
bindings (tracing and memory export.) I don't expect anyone here to
have much use for them.

Anyway, testing would be appreciated. It's very likely that the OBSEL
cache position needs to be tweaked further. I recall LotR or something
also had issues with caching in the past ... but I couldn't find the
game at ::ahem:: the used game shop ... to test it.

I think there were other games that had different behavior based on
the old obsel_cache setting, too. Would be good to make sure they all
work as expected.

EDIT: Ah, "JRR Tolkein's LotR", bah. Yeah, no sprite flickering with
the new WIP. Also, speed hit only seems to affect Core 2's. No frame
drop on my Athlon. Probably something to do with locality of reference
or somesuch. Modern processors are too damned complicated :P

So then, assuming nobody spots any bugs ... how about a new release
tomorrow?

[No archive available]
2008-12-14 05:31:00 +00:00
byuu
a721c7e91b Update to bsnes v037r06? release.
What about calling the "Default" button on the paths window "Auto"
instead?

And no, label text does not wrap. That's why I have the forced line
breaks.

New WIP:
- fixes the tiledata cache glitch for Super Buster Bros V1.0; possibly
others
- adds updated nall templates: copy constructor vector class with
amortized constant growth being the most notable change. Resisted the
CC approach before because it's slower; but the amortized growth
avoids most of the overhead, and I'd rather do things through the CC
than possibly change the internal object memory base address
transparently (invalidating self-pointers and such.)
- adds snes.hide_light_cursors or something similar for Panzer88

Panzer88, I'd appreciate input on the last one. My fear is that
because the system is 100% relative, if you move your Wii remote too
far to the side, it will appear to "throw off" the alignment after the
cursor sticks to one end. Only way around that would be to use
absolute positioning.

It'd be really difficult to support both relative and absolute systems
at the same time, due to the way the drivers work. Absolute cannot
work with the mouse by its very design, and it'd be sketchy with
different window sizes and such for the light guns. And even if no
game uses it -- it _is_ possible to use a mouse on port 1, and a scope
on port 2.

[No archive available]
2008-11-25 15:05:00 +00:00
byuu
14bd3077e5 Update to bsnes v037r02? release.
New WIP.

If anyone on Linux uses this one, be careful. I'm not entirely sure,
but I think my style changes may be affecting the entire theme and not
just bsnes. I looked at example code of other popular apps that do the
same thing, though.

I'm not sure if it's just my imagination. Audacious' file open dialog
seems narrower, but every app still has the menu-style combo-boxes ...
so I don't know.

But if it is changing it -- I don't know how to revert it. Not like
it's a major change, anyway.

F-3582, cool thanks. You have the WIP URL, right?

henke37, it can't do point filtering when upscaling the image (eg the
image always gets blurry.)

[No archive available]
2008-11-03 09:16:00 +00:00
byuu
7236499e2f Update to bsnes v037r01? release.
New WIP.

For Linux users, this adds a PulseAudio driver, using
<pulse/simple.h>. Debian / Ubuntu users will need to add libpulse-dev,
or remove "audio.pulseaudio" from the ruby= line in the Makefile to
compile now.

I wasn't able to test the driver at all -- I get "Connection refused"
when I call pa_simple_new(). It appears that despite having Xubuntu
8.04, it doesn't come with PulseAudio installed. Guess they lied about
it on their website or something ...
I could install the packages, but hearing horror stories from others
-- I'd rather not.

If anyone can test for me, that'd be great. Check the console for
error messages.

Next, I finally got around to re-doing the S-DD1 driver to eliminate
the need to hook DMA transfers inside the S-CPU core to recognize
decompression events. That violated my strict feelings regarding
separation of cores and avoiding enslavement, even when it adds
significant overhead.

I'm now going with a radically different approach, that's hopefully
much more like the real hardware. It explains the way $4800 / $4801
behave, as well as why fixed transfers are required, but it may not be
faithful.

What I do is have the S-DD1 chip spy on $43x2-$43x6, and cache the
values internally. Then, whenever you read from $c0-ff:0000-ffff, it
will test if $4800 & $4801 != 0. If that's the case, we look at the
address requested, if it matches one of the active S-DD1 channels (eg
$4800 & $4801 & (1 << channel#) != 0), then we hijack the read with
decompressed data.

In my implementation, I decompress the entire block on the first read,
then stream from the buffer. On real hardware, it most likely starts
streaming on $4801.dN enable, but that's not too feasible for a few
reasons for me. Most notably the S-DD1 lib requires a size parameter.
It doesn't really matter, since we know the size from $43x5,6; so it
doesn't suffer the same problems the SPC7110 did.

Anyway, once all the data is transferred, it will clear the channel
bit from $4801. There may be some hardware differences here -- can you
perform two transfers at the same time? What happens if HDMA
terminates the DMA channel? These things never happen in Star Ocean or
SFA2, so they'll have to be tested manually.

If no channels are active or there are no address fetch matches, it
invokes the MMC to return raw ROM data.

All of that gives a ~1.5% speedup both to regular games and S-DD1
games. The former because DMA transfers don't have to test for the
S-DD1 during every transfer; the latter because I'm using a quick
lookup table (slower per fetch) in place of re-mapping the whole banks
on writes to the MMC (very slow per write.) The latter was much
cleaner and simpler, but I need the former to hook the decompression
stuff natively.

Windows binary is included, I'd appreciate if anyone could play some
Star Ocean / SFA2 and look for regressions from v037a.

> I'm just so used to seeing everyone having a "Close" button in their
> configuration dialogs I figured bsnes would have one. It just now
> that I looked around that I realised that only some of the
> configuration "panels" actually have buttons.


Ah, I see what you mean. Sorry. I can add one if you want, I suppose.

[No archive available]
2008-10-31 11:05:00 +00:00
byuu
9b03874f32 Update to bsnes v037a release.
[No changelog available]
2008-10-27 15:02:10 +00:00
1321 changed files with 176634 additions and 58897 deletions

View File

@@ -1,84 +0,0 @@
bsnes (TM) Reference License
Copyright (C) 2004 - 2008 byuu
All rights reserved
1. Definitions
The terms "reproduce", "reproduction", "distribute" and "distribution" have the
same meaning here as under U.S. copyright law.
"The software" means this software package as a whole, including, but not
limited to, this license, binaries, source code, documentation, and data.
"You" means the licensee of the software.
"The licensor" means the copyright holder of the software, byuu.
2. Grant of Rights
Subject to the terms of this license, the licensor grants you a
non-transferable, non-exclusive, worldwide, royalty-free copyright license to
reproduce the software for non-commercial use only, provided the software
remains unmodified, and there is no charge for the software itself, its' use,
nor for the medium upon which the software is distributed. The reproduction of
modified or derivative works of the software is strictly prohibited, except when
transmitted solely to the licensor.
3. Limitations
This license does not grant you any rights to use the licensor's name, logo or
trademarks.
The software is provided "as is", and any express or implied warranties,
including, but not limited to, the implied warranties of merchantability and
fitness for a particular purpose are disclaimed. In no event shall the licensor
be liable for any direct, indirect, incidental, special, exemplary, or
consequential damages (including, but not limited to, procurement of substitute
goods or services; loss of use, data, or profits; or business interruption)
however caused and on any theory of liability, whether in contract, strict
liability, or tort (including negligence or otherwise) arising in any way out of
the use of the software, even if advised of the possibility of such damage.
In the event that this license is determined to be invalid or unenforceable, the
Grant of Rights will become null and void, and no rights shall be granted to the
licensee, within the scope of U.S. copyright law.
4. Exemptions
The software includes the work of other copyright holders, which is licensed
under different agreements, and exempt from this license. Below is a complete
list of all such software, and their respective copyright holders and licenses.
Further, respective source code files are labeled with their correct licensing
information in the header. The lack of such a header indicates said file falls
under the bsnes license.
HQ2x filter, author: MaxST, license: LGPL
JMA decompressor, author: NSRT Team, license: GPL*
NTSC filter, author: blargg, license: LGPL
zlib decompressor, license: zlib license
(* bsnes has received an exemption from the copyright holder to use this work.)
The software also includes works which have been released to the public domain,
which are not bound to any licensing agreements. Below is a complete list of all
such software.
libco, author: byuu
S-DD1 decompressor, author: Andreas Naive
SPC7110 decompressor, author: neviksti
Any software listed above as exemptions may be relicensed individually from
bsnes under their respective terms. However, no bsnes licensed portions can be
combined with such a derivative work.
The software also includes the work of other copyright holders, which is
licensed under the terms of the bsnes license, with permission to do so from the
respective authors. Below is a complete list of all such software.
Cx4 emu, authors: anomie, Overload, zsKnight, Nach
DSP-1 emu, authors: Overload, John Weidman, Neviksti, Andreas Naive
DSP-2 emu, author: Overload
DSP-3 emu, authors: John Weidman, Kris Bleakley, Lancer, z80 gaiden
DSP-4 emu, authors: Dreamer Nom, John Weidman, Kris Bleakley, Nach, z80 gaiden
S-DSP emu, author: blargg
ST-010 emu, authors: John Weidman, Matthew Kendora, Overload, Feather

View File

@@ -1,108 +0,0 @@
bsnes
Version: 0.037
Author: byuu
========
General:
========
bsnes is a Super Nintendo / Super Famicom emulator that began on
October 14th, 2004.
The latest version can be downloaded from:
http://byuu.org/
Please see license.txt for important licensing information.
==============
Configuration:
==============
bsnes has two configuration files: bsnes.cfg, for program settings; and
locale.cfg, for localization.
For each file, bsnes will start by looking inside the same folder where the
bsnes executable is located. If said file is not found, it will then check your
user profile folder. On Windows, this is located at "%APPDATA%/.bsnes". On all
other operating systems, this is located at "~/.bsnes". If said file is still
not found, it will automatically be created in your user profile folder.
If you wish to use bsnes in single-user mode, be sure that both files exist
inside the same folder as the bsnes executable. If they do not, you can simply
create new blank files and bsnes will use them in the future.
If you wish to use bsnes in multi-user mode, simply delete these two files from
the bsnes executable directory if they exist.
If you wish to have multiple configuration profiles for the same user, you will
need to make copies of the bsnes executable, and use each one in single-user
mode.
====================
Known Limitation(s):
====================
S-CPU
- Multiply / divide register delays not implemented
- "Glitch" when reading joypad registers during auto polling not implemented
S-PPU
- Uses scanline-based renderer. This is very inaccurate, but few (if any)
games rely on mid-scanline writes to function correctly
- Does not support FirstSprite+Y priority
- OAM / CGRAM accesses during active display not supported correctly
- RTO flags are not calculated on frames that are skipped when frameskipping
is enabled. This provides a major speedup, however it will cause in issues
in games that test these flags, eg the SNES Test Program Electronics Test.
Turning frameskipping off will allow RTO flag calculation on every frame
Hardware Bugs
- S-CPU.r1 HDMA crashing bug not emulated
- S-CPU<>S-SMP communication bus conflicts not emulated
===============
Known Issue(s):
===============
On Windows, attempting to load a ZIP, GZ or JMA compressed archive with
non-ANSI characters in the filename will fail. This is because Windows
requires UTF-16 encoding, but these libraries only work with UTF-8.
Note that loading uncompressed images (SMC, SFC, etc) with non-ANSI characters
works properly on all platforms.
=====================
Unsupported Hardware:
=====================
SA-1
Coprocessor used in many popular games, including:
- Dragon Ball Z Hyper Dimension
- Kirby Super Star
- Kirby's Dreamland 3
- Marvelous
- SD Gundam G-NEXT
- Super Mario RPG
Super FX
Coprocessor used in many popular games, including:
- Doom
- Star Fox
- Star Fox 2 (unreleased beta)
- Super Mario World 2: Yoshi's Island
ST-011
SETA DSP used by Quick-move Shogi Match with Nidan Rank-holder Morita
ST-018
SETA RISC CPU used by Quick-move Shogi Match with Nidan Rank-holder Morita 2
Super Gameboy
Cartridge passthrough used for playing Gameboy games
=============
Contributors:
=============
Andreas Naive, anomie, blargg, DMV27, FitzRoy, GIGO, Jonas Quinn, kode54, krom,
Matthew Callis, mudlord, Nach, neviksti, Overload, RedDwarf, Richard Bannister,
tetsuo55, TRAC, zones

132
snesfilter/2xsai/2xsai.cpp Normal file
View File

@@ -0,0 +1,132 @@
//2xSaI / Super 2xSaI / Super Eagle filter
//authors: kode54 and Kreed
//license: GPL
#include "2xsai.hpp"
#include "implementation.cpp"
//=====
//2xSaI
//=====
void _2xSaIFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
outwidth = width;
outheight = height;
if(width <= 256 && height <= 240) {
outwidth *= 2;
outheight *= 2;
}
}
void _2xSaIFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
if(width > 256 || height > 240) {
filter_direct.render(output, outpitch, input, pitch, width, height);
return;
}
for(unsigned y = 0; y < height; y++) {
const uint16_t *line_in = (const uint16_t *) (((const uint8_t*)input) + pitch * y);
uint32_t *line_out = temp + y * 256;
for(unsigned x = 0; x < width; x++) {
line_out[x] = colortable[line_in[x]];
}
}
_2xSaI32( (unsigned char *) temp, 1024, 0, (unsigned char *) output, outpitch, width, height );
}
_2xSaIFilter::_2xSaIFilter() {
temp = new uint32_t[256*240];
}
_2xSaIFilter::~_2xSaIFilter() {
delete[] temp;
}
//===========
//Super 2xSaI
//===========
void Super2xSaIFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
outwidth = width;
outheight = height;
if(width <= 256 && height <= 240) {
outwidth *= 2;
outheight *= 2;
}
}
void Super2xSaIFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
if(width > 256 || height > 240) {
filter_direct.render(output, outpitch, input, pitch, width, height);
return;
}
for(unsigned y = 0; y < height; y++) {
const uint16_t *line_in = (const uint16_t *) (((const uint8_t*)input) + pitch * y);
uint32_t *line_out = temp + y * 256;
for(unsigned x = 0; x < width; x++) {
line_out[x] = colortable[line_in[x]];
}
}
Super2xSaI32( (unsigned char *) temp, 1024, 0, (unsigned char *) output, outpitch, width, height );
}
Super2xSaIFilter::Super2xSaIFilter() {
temp = new uint32_t[256*240];
}
Super2xSaIFilter::~Super2xSaIFilter() {
delete[] temp;
}
//===========
//Super Eagle
//===========
void SuperEagleFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
outwidth = width;
outheight = height;
if(width <= 256 && height <= 240) {
outwidth *= 2;
outheight *= 2;
}
}
void SuperEagleFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
if(width > 256 || height > 240) {
filter_direct.render(output, outpitch, input, pitch, width, height);
return;
}
for(unsigned y = 0; y < height; y++) {
const uint16_t *line_in = (const uint16_t *) (((const uint8_t*)input) + pitch * y);
uint32_t *line_out = temp + y * 256;
for(unsigned x = 0; x < width; x++) {
line_out[x] = colortable[line_in[x]];
}
}
SuperEagle32( (unsigned char *) temp, 1024, 0, (unsigned char *) output, outpitch, width, height );
}
SuperEagleFilter::SuperEagleFilter() {
temp = new uint32_t[256*240];
}
SuperEagleFilter::~SuperEagleFilter() {
delete[] temp;
}

View File

@@ -0,0 +1,35 @@
class _2xSaIFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
_2xSaIFilter();
~_2xSaIFilter();
private:
uint32_t *temp;
} filter_2xsai;
class Super2xSaIFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
Super2xSaIFilter();
~Super2xSaIFilter();
private:
uint32_t *temp;
} filter_super2xsai;
class SuperEagleFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
SuperEagleFilter();
~SuperEagleFilter();
private:
uint32_t *temp;
} filter_supereagle;

File diff suppressed because it is too large Load Diff

89
snesfilter/Makefile Normal file
View File

@@ -0,0 +1,89 @@
include nall/Makefile
qtlibs := QtCore QtGui
include nall/qt/Makefile
c := $(compiler) -std=gnu99
cpp := $(subst cc,++,$(compiler)) -std=gnu++0x
flags := -O3 -I. -Iobj -fomit-frame-pointer $(qtinc)
link :=
ifeq ($(platform),x)
flags := -fPIC -fopenmp $(flags)
link += -s -fopenmp -lpthread -lgomp
else ifeq ($(platform),osx)
flags := -fPIC -fopenmp $(flags)
link += -fopenmp -lpthread -lgomp
else ifeq ($(platform),win)
flags := -fopenmp $(flags)
link += -fopenmp -lpthread
endif
objects := snesfilter
compile = \
$(strip \
$(if $(filter %.c,$<), \
$(c) $(flags) $1 -c $< -o $@, \
$(if $(filter %.cpp,$<), \
$(cpp) $(flags) $1 -c $< -o $@ \
) \
) \
)
%.o: $<; $(call compile)
all: build;
objects := $(patsubst %,obj/%.o,$(objects))
moc_headers := $(call rwildcard,./,%.moc.hpp)
moc_objects := $(foreach f,$(moc_headers),obj/$(notdir $(patsubst %.moc.hpp,%.moc,$f)))
# automatically run moc on all .moc.hpp (MOC header) files
%.moc: $<; $(moc) -i $< -o $@
# automatically generate %.moc build rules
__list = $(moc_headers)
$(foreach f,$(moc_objects), \
$(eval __file = $(word 1,$(__list))) \
$(eval __list = $(wordlist 2,$(words $(__list)),$(__list))) \
$(eval $f: $(__file)) \
)
##################
### snesfilter ###
##################
obj/snesfilter.o: snesfilter.cpp *
###############
### targets ###
###############
build: $(moc_objects) $(objects)
ifeq ($(platform),x)
ar rcs libsnesfilter.a $(objects)
$(cpp) $(link) -o libsnesfilter.so -shared -Wl,-soname,libsnesfilter.so.1 $(objects) $(qtlib)
else ifeq ($(platform),osx)
ar rcs libsnesfilter.a $(objects)
$(cpp) $(link) -o libsnesfilter.dylib -shared -dynamiclib $(objects) $(qtlib)
else ifeq ($(platform),win)
$(cpp) $(link) -o snesfilter.dll -shared -Wl,--out-implib,libsnesfilter.a $(objects) $(qtlib)
endif
install:
ifeq ($(platform),x)
install -D -m 755 libsnesfilter.a $(DESTDIR)$(prefix)/lib
install -D -m 755 libsnesfilter.so $(DESTDIR)$(prefix)/lib
ldconfig -n $(DESTDIR)$(prefix)/lib
else ifeq ($(platform),osx)
cp libsnesfilter.dylib /usr/local/lib/libsnesfilter.dylib
endif
clean:
-@$(call delete,obj/*.o)
-@$(call delete,obj/*.moc)
-@$(call delete,libsnesfilter.a)
-@$(call delete,libsnesfilter.so)
-@$(call delete,libsnesfilter.dylib)
-@$(call delete,snesfilter.dll)

2
snesfilter/cc.bat Normal file
View File

@@ -0,0 +1,2 @@
@mingw32-make
@pause

1
snesfilter/clean.bat Normal file
View File

@@ -0,0 +1 @@
@mingw32-make clean

View File

@@ -0,0 +1,23 @@
#include "direct.hpp"
void DirectFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
outwidth = width;
outheight = height;
}
void DirectFilter::render(
uint32_t *output, unsigned outpitch, const uint16_t *input, unsigned pitch,
unsigned width, unsigned height
) {
pitch >>= 1;
outpitch >>= 2;
for(unsigned y = 0; y < height; y++) {
for(unsigned x = 0; x < width; x++) {
uint16_t p = *input++;
*output++ = colortable[p];
}
input += pitch - width;
output += outpitch - width;
}
}

View File

@@ -0,0 +1,5 @@
class DirectFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
} filter_direct;

195
snesfilter/hq2x/hq2x.cpp Normal file
View File

@@ -0,0 +1,195 @@
//HQ2x filter
//authors: byuu and blargg
//license: public domain
//
//note: this is a clean reimplementation of the original HQ2x filter, which was
//written by Maxim Stepin (MaxSt). it is not 100% identical, but very similar.
#include "hq2x.hpp"
void HQ2xFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
if(width > 256 || height > 240) return filter_direct.size(outwidth, outheight, width, height);
outwidth = width * 2;
outheight = height * 2;
}
void HQ2xFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
if(width > 256 || height > 240) {
filter_direct.render(output, outpitch, input, pitch, width, height);
return;
}
pitch >>= 1;
outpitch >>= 2;
#pragma omp parallel for
for(unsigned y = 0; y < height; y++) {
const uint16_t *in = input + y * pitch;
uint32_t *out0 = output + y * outpitch * 2;
uint32_t *out1 = output + y * outpitch * 2 + outpitch;
int prevline = (y == 0 ? 0 : pitch);
int nextline = (y == height - 1 ? 0 : pitch);
in++;
*out0++ = 0; *out0++ = 0;
*out1++ = 0; *out1++ = 0;
for(unsigned x = 1; x < 256 - 1; x++) {
uint16_t A = *(in - prevline - 1);
uint16_t B = *(in - prevline + 0);
uint16_t C = *(in - prevline + 1);
uint16_t D = *(in - 1);
uint16_t E = *(in + 0);
uint16_t F = *(in + 1);
uint16_t G = *(in + nextline - 1);
uint16_t H = *(in + nextline + 0);
uint16_t I = *(in + nextline + 1);
uint32_t e = yuvTable[E] + diff_offset;
uint8_t pattern;
pattern = diff(e, A) << 0;
pattern |= diff(e, B) << 1;
pattern |= diff(e, C) << 2;
pattern |= diff(e, D) << 3;
pattern |= diff(e, F) << 4;
pattern |= diff(e, G) << 5;
pattern |= diff(e, H) << 6;
pattern |= diff(e, I) << 7;
*(out0 + 0) = colortable[blend(hqTable[pattern], E, A, B, D, F, H)]; pattern = rotate[pattern];
*(out0 + 1) = colortable[blend(hqTable[pattern], E, C, F, B, H, D)]; pattern = rotate[pattern];
*(out1 + 1) = colortable[blend(hqTable[pattern], E, I, H, F, D, B)]; pattern = rotate[pattern];
*(out1 + 0) = colortable[blend(hqTable[pattern], E, G, D, H, B, F)];
in++;
out0 += 2;
out1 += 2;
}
in++;
*out0++ = 0; *out0++ = 0;
*out1++ = 0; *out1++ = 0;
}
}
HQ2xFilter::HQ2xFilter() {
yuvTable = new uint32_t[32768];
for(unsigned i = 0; i < 32768; i++) {
uint8_t R = (i >> 0) & 31;
uint8_t G = (i >> 5) & 31;
uint8_t B = (i >> 10) & 31;
//bgr555->bgr888
double r = (R << 3) | (R >> 2);
double g = (G << 3) | (G >> 2);
double b = (B << 3) | (B >> 2);
//bgr888->yuv888
double y = (r + g + b) * (0.25f * (63.5f / 48.0f));
double u = ((r - b) * 0.25f + 128.0f) * (7.5f / 7.0f);
double v = ((g * 2.0f - r - b) * 0.125f + 128.0f) * (7.5f / 6.0f);
yuvTable[i] = ((unsigned)y << 21) + ((unsigned)u << 11) + ((unsigned)v);
}
for(unsigned n = 0; n < 256; n++) {
rotate[n] = ((n >> 2) & 0x11) | ((n << 2) & 0x88)
| ((n & 0x01) << 5) | ((n & 0x08) << 3)
| ((n & 0x10) >> 3) | ((n & 0x80) >> 5);
}
}
HQ2xFilter::~HQ2xFilter() {
delete[] yuvTable;
}
bool HQ2xFilter::same(uint16_t x, uint16_t y) {
return !((yuvTable[x] - yuvTable[y] + diff_offset) & diff_mask);
}
bool HQ2xFilter::diff(uint32_t x, uint16_t y) {
return ((x - yuvTable[y]) & diff_mask);
}
void HQ2xFilter::grow(uint32_t &n) { n |= n << 16; n &= 0x03e07c1f; }
uint16_t HQ2xFilter::pack(uint32_t n) { n &= 0x03e07c1f; return n | (n >> 16); }
uint16_t HQ2xFilter::blend1(uint32_t A, uint32_t B) {
grow(A); grow(B);
A = (A * 3 + B) >> 2;
return pack(A);
}
uint16_t HQ2xFilter::blend2(uint32_t A, uint32_t B, uint32_t C) {
grow(A); grow(B); grow(C);
return pack((A * 2 + B + C) >> 2);
}
uint16_t HQ2xFilter::blend3(uint32_t A, uint32_t B, uint32_t C) {
grow(A); grow(B); grow(C);
return pack((A * 5 + B * 2 + C) >> 3);
}
uint16_t HQ2xFilter::blend4(uint32_t A, uint32_t B, uint32_t C) {
grow(A); grow(B); grow(C);
return pack((A * 6 + B + C) >> 3);
}
uint16_t HQ2xFilter::blend5(uint32_t A, uint32_t B, uint32_t C) {
grow(A); grow(B); grow(C);
return pack((A * 2 + (B + C) * 3) >> 3);
}
uint16_t HQ2xFilter::blend6(uint32_t A, uint32_t B, uint32_t C) {
grow(A); grow(B); grow(C);
return pack((A * 14 + B + C) >> 4);
}
uint16_t HQ2xFilter::blend(unsigned rule, uint16_t E, uint16_t A, uint16_t B, uint16_t D, uint16_t F, uint16_t H) {
switch(rule) { default:
case 0: return E;
case 1: return blend1(E, A);
case 2: return blend1(E, D);
case 3: return blend1(E, B);
case 4: return blend2(E, D, B);
case 5: return blend2(E, A, B);
case 6: return blend2(E, A, D);
case 7: return blend3(E, B, D);
case 8: return blend3(E, D, B);
case 9: return blend4(E, D, B);
case 10: return blend5(E, D, B);
case 11: return blend6(E, D, B);
case 12: return same(B, D) ? blend2(E, D, B) : E;
case 13: return same(B, D) ? blend5(E, D, B) : E;
case 14: return same(B, D) ? blend6(E, D, B) : E;
case 15: return same(B, D) ? blend2(E, D, B) : blend1(E, A);
case 16: return same(B, D) ? blend4(E, D, B) : blend1(E, A);
case 17: return same(B, D) ? blend5(E, D, B) : blend1(E, A);
case 18: return same(B, F) ? blend3(E, B, D) : blend1(E, D);
case 19: return same(D, H) ? blend3(E, D, B) : blend1(E, B);
}
}
const uint8_t HQ2xFilter::hqTable[256] = {
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 15, 12, 5, 3, 17, 13,
4, 4, 6, 18, 4, 4, 6, 18, 5, 3, 12, 12, 5, 3, 1, 12,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 17, 13, 5, 3, 16, 14,
4, 4, 6, 18, 4, 4, 6, 18, 5, 3, 16, 12, 5, 3, 1, 14,
4, 4, 6, 2, 4, 4, 6, 2, 5, 19, 12, 12, 5, 19, 16, 12,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 16, 12, 5, 3, 16, 12,
4, 4, 6, 2, 4, 4, 6, 2, 5, 19, 1, 12, 5, 19, 1, 14,
4, 4, 6, 2, 4, 4, 6, 18, 5, 3, 16, 12, 5, 19, 1, 14,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 15, 12, 5, 3, 17, 13,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 16, 12, 5, 3, 16, 12,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 17, 13, 5, 3, 16, 14,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 16, 13, 5, 3, 1, 14,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 16, 12, 5, 3, 16, 13,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 16, 12, 5, 3, 1, 12,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 16, 12, 5, 3, 1, 14,
4, 4, 6, 2, 4, 4, 6, 2, 5, 3, 1, 12, 5, 3, 1, 14,
};

30
snesfilter/hq2x/hq2x.hpp Normal file
View File

@@ -0,0 +1,30 @@
class HQ2xFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
HQ2xFilter();
~HQ2xFilter();
private:
enum {
diff_offset = (0x440 << 21) + (0x207 << 11) + 0x407,
diff_mask = (0x380 << 21) + (0x1f0 << 11) + 0x3f0,
};
static const uint8_t hqTable[256];
uint32_t *yuvTable;
uint8_t rotate[256];
alwaysinline bool same(uint16_t x, uint16_t y);
alwaysinline bool diff(uint32_t x, uint16_t y);
alwaysinline void grow(uint32_t &n);
alwaysinline uint16_t pack(uint32_t n);
alwaysinline uint16_t blend1(uint32_t A, uint32_t B);
alwaysinline uint16_t blend2(uint32_t A, uint32_t B, uint32_t C);
alwaysinline uint16_t blend3(uint32_t A, uint32_t B, uint32_t C);
alwaysinline uint16_t blend4(uint32_t A, uint32_t B, uint32_t C);
alwaysinline uint16_t blend5(uint32_t A, uint32_t B, uint32_t C);
alwaysinline uint16_t blend6(uint32_t A, uint32_t B, uint32_t C);
alwaysinline uint16_t blend(unsigned rule, uint16_t E, uint16_t A, uint16_t B, uint16_t D, uint16_t F, uint16_t H);
} filter_hq2x;

53
snesfilter/lq2x/lq2x.cpp Normal file
View File

@@ -0,0 +1,53 @@
#include "lq2x.hpp"
void LQ2xFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
if(width > 256 || height > 240) return filter_direct.size(outwidth, outheight, width, height);
outwidth = width * 2;
outheight = height * 2;
}
void LQ2xFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
if(width > 256 || height > 240) {
filter_direct.render(output, outpitch, input, pitch, width, height);
return;
}
pitch >>= 1;
outpitch >>= 2;
uint32_t *out0 = output;
uint32_t *out1 = output + outpitch;
for(unsigned y = 0; y < height; y++) {
int prevline = (y == 0 ? 0 : pitch);
int nextline = (y == height - 1 ? 0 : pitch);
for(unsigned x = 0; x < width; x++) {
uint16_t A = *(input - prevline);
uint16_t B = (x > 0) ? *(input - 1) : *input;
uint16_t C = *input;
uint16_t D = (x < 255) ? *(input + 1) : *input;
uint16_t E = *(input++ + nextline);
uint32_t c = colortable[C];
if(A != E && B != D) {
*out0++ = (A == B ? colortable[C + A - ((C ^ A) & 0x0421) >> 1] : c);
*out0++ = (A == D ? colortable[C + A - ((C ^ A) & 0x0421) >> 1] : c);
*out1++ = (E == B ? colortable[C + E - ((C ^ E) & 0x0421) >> 1] : c);
*out1++ = (E == D ? colortable[C + E - ((C ^ E) & 0x0421) >> 1] : c);
} else {
*out0++ = c;
*out0++ = c;
*out1++ = c;
*out1++ = c;
}
}
input += pitch - width;
out0 += outpitch + outpitch - 512;
out1 += outpitch + outpitch - 512;
}
}

5
snesfilter/lq2x/lq2x.hpp Normal file
View File

@@ -0,0 +1,5 @@
class LQ2xFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
} filter_lq2x;

View File

@@ -1,4 +1,4 @@
# Makefile.string
# Makefile
# author: byuu
# license: public domain
@@ -7,9 +7,53 @@
[0-9] = 0 1 2 3 4 5 6 7 8 9
[markup] = ` ~ ! @ \# $$ % ^ & * ( ) - _ = + [ { ] } \ | ; : ' " , < . > / ?
[all] = $([A-Z]) $([a-z]) $([0-9]) $([markup])
[space] :=
[space] :=
[space] +=
#####
# platform detection
#####
ifeq ($(platform),)
uname := $(shell uname -a)
ifeq ($(uname),)
platform := win
delete = del $(subst /,\,$1)
else ifneq ($(findstring Darwin,$(uname)),)
platform := osx
delete = rm -f $1
else
platform := x
delete = rm -f $1
endif
endif
ifeq ($(compiler),)
ifeq ($(platform),osx)
compiler := gcc-mp-4.4
else
compiler := gcc
endif
endif
ifeq ($(prefix),)
prefix := /usr/local
endif
#####
# function rwildcard(directory, pattern)
#####
rwildcard = \
$(strip \
$(filter $(if $2,$2,%), \
$(foreach f, \
$(wildcard $1*), \
$(eval t = $(call rwildcard,$f/)) \
$(if $t,$t,$f) \
) \
) \
)
#####
# function strtr(source, from, to)
#####

View File

@@ -0,0 +1,17 @@
#ifndef NALL_ALGORITHM_HPP
#define NALL_ALGORITHM_HPP
#undef min
#undef max
namespace nall {
template<typename T, typename U> T min(const T &t, const U &u) {
return t < u ? t : u;
}
template<typename T, typename U> T max(const T &t, const U &u) {
return t > u ? t : u;
}
}
#endif

74
snesfilter/nall/any.hpp Normal file
View File

@@ -0,0 +1,74 @@
#ifndef NALL_ANY_HPP
#define NALL_ANY_HPP
#include <typeinfo>
#include <type_traits>
#include <nall/static.hpp>
namespace nall {
class any {
public:
bool empty() const { return container; }
const std::type_info& type() const { return container ? container->type() : typeid(void); }
template<typename T> any& operator=(const T& value_) {
typedef typename static_if<
std::is_array<T>::value,
typename std::remove_extent<typename std::add_const<T>::type>::type*,
T
>::type auto_t;
if(type() == typeid(auto_t)) {
static_cast<holder<auto_t>*>(container)->value = (auto_t)value_;
} else {
if(container) delete container;
container = new holder<auto_t>((auto_t)value_);
}
return *this;
}
any() : container(0) {}
template<typename T> any(const T& value_) : container(0) { operator=(value_); }
private:
struct placeholder {
virtual const std::type_info& type() const = 0;
} *container;
template<typename T> struct holder : placeholder {
T value;
const std::type_info& type() const { return typeid(T); }
holder(const T& value_) : value(value_) {}
};
template<typename T> friend T any_cast(any&);
template<typename T> friend T any_cast(const any&);
template<typename T> friend T* any_cast(any*);
template<typename T> friend const T* any_cast(const any*);
};
template<typename T> T any_cast(any &value) {
typedef typename std::remove_reference<T>::type nonref;
if(value.type() != typeid(nonref)) throw;
return static_cast<any::holder<nonref>*>(value.container)->value;
}
template<typename T> T any_cast(const any &value) {
typedef const typename std::remove_reference<T>::type nonref;
if(value.type() != typeid(nonref)) throw;
return static_cast<any::holder<nonref>*>(value.container)->value;
}
template<typename T> T* any_cast(any *value) {
if(!value || value->type() != typeid(T)) return 0;
return &static_cast<any::holder<T>*>(value->container)->value;
}
template<typename T> const T* any_cast(const any *value) {
if(!value || value->type() != typeid(T)) return 0;
return &static_cast<any::holder<T>*>(value->container)->value;
}
}
#endif

141
snesfilter/nall/array.hpp Normal file
View File

@@ -0,0 +1,141 @@
#ifndef NALL_ARRAY_HPP
#define NALL_ARRAY_HPP
#include <stdlib.h>
#include <initializer_list>
#include <type_traits>
#include <utility>
#include <nall/algorithm.hpp>
#include <nall/bit.hpp>
#include <nall/concept.hpp>
#include <nall/foreach.hpp>
#include <nall/utility.hpp>
namespace nall {
//dynamic vector array
//neither constructor nor destructor is ever invoked;
//thus, this should only be used for POD objects.
template<typename T> class array {
protected:
T *pool;
unsigned poolsize, buffersize;
public:
unsigned size() const { return buffersize; }
unsigned capacity() const { return poolsize; }
void reset() {
if(pool) free(pool);
pool = 0;
poolsize = 0;
buffersize = 0;
}
void reserve(unsigned newsize) {
if(newsize == poolsize) return;
pool = (T*)realloc(pool, newsize * sizeof(T));
poolsize = newsize;
buffersize = min(buffersize, newsize);
}
void resize(unsigned newsize) {
if(newsize > poolsize) reserve(bit::round(newsize)); //round reserve size up to power of 2
buffersize = newsize;
}
T* get(unsigned minsize = 0) {
if(minsize > buffersize) resize(minsize);
if(minsize > buffersize) throw "array[] out of bounds";
return pool;
}
void append(const T data) {
operator[](buffersize) = data;
}
template<typename U> void insert(unsigned index, const U list) {
unsigned listsize = container_size(list);
resize(buffersize + listsize);
memmove(pool + index + listsize, pool + index, (buffersize - index) * sizeof(T));
foreach(item, list) pool[index++] = item;
}
void insert(unsigned index, const T item) {
insert(index, array<T>{ item });
}
void remove(unsigned index, unsigned count = 1) {
for(unsigned i = index; count + i < buffersize; i++) {
pool[i] = pool[count + i];
}
if(count + index >= buffersize) resize(index); //every element >= index was removed
else resize(buffersize - count);
}
optional<unsigned> find(const T data) {
for(unsigned i = 0; i < size(); i++) if(pool[i] == data) return { true, i };
return { false, 0 };
}
void clear() {
memset(pool, 0, buffersize * sizeof(T));
}
array() : pool(0), poolsize(0), buffersize(0) {
}
array(std::initializer_list<T> list) : pool(0), poolsize(0), buffersize(0) {
for(const T *p = list.begin(); p != list.end(); ++p) append(*p);
}
~array() {
reset();
}
//copy
array& operator=(const array &source) {
if(pool) free(pool);
buffersize = source.buffersize;
poolsize = source.poolsize;
pool = (T*)malloc(sizeof(T) * poolsize); //allocate entire pool size,
memcpy(pool, source.pool, sizeof(T) * buffersize); //... but only copy used pool objects
return *this;
}
array(const array &source) : pool(0), poolsize(0), buffersize(0) {
operator=(source);
}
//move
array& operator=(array &&source) {
if(pool) free(pool);
pool = source.pool;
poolsize = source.poolsize;
buffersize = source.buffersize;
source.pool = 0;
source.reset();
return *this;
}
array(array &&source) : pool(0), poolsize(0), buffersize(0) {
operator=(std::move(source));
}
//index
inline T& operator[](unsigned index) {
if(index >= buffersize) resize(index + 1);
if(index >= buffersize) throw "array[] out of bounds";
return pool[index];
}
inline const T& operator[](unsigned index) const {
if(index >= buffersize) throw "array[] out of bounds";
return pool[index];
}
};
template<typename T> struct has_size<array<T>> { enum { value = true }; };
}
#endif

View File

@@ -0,0 +1,90 @@
#ifndef NALL_BASE64_HPP
#define NALL_BASE64_HPP
#include <string.h>
#include <nall/stdint.hpp>
namespace nall {
class base64 {
public:
static bool encode(char *&output, const uint8_t* input, unsigned inlength) {
output = new char[inlength * 8 / 6 + 6]();
unsigned i = 0, o = 0;
while(i < inlength) {
switch(i % 3) {
case 0: {
output[o++] = enc(input[i] >> 2);
output[o] = enc((input[i] & 3) << 4);
} break;
case 1: {
uint8_t prev = dec(output[o]);
output[o++] = enc(prev + (input[i] >> 4));
output[o] = enc((input[i] & 15) << 2);
} break;
case 2: {
uint8_t prev = dec(output[o]);
output[o++] = enc(prev + (input[i] >> 6));
output[o++] = enc(input[i] & 63);
} break;
}
i++;
}
return true;
}
static bool decode(uint8_t *&output, unsigned &outlength, const char *input) {
unsigned inlength = strlen(input), infix = 0;
output = new uint8_t[inlength]();
unsigned i = 0, o = 0;
while(i < inlength) {
uint8_t x = dec(input[i]);
switch(i++ & 3) {
case 0: {
output[o] = x << 2;
} break;
case 1: {
output[o++] |= x >> 4;
output[o] = (x & 15) << 4;
} break;
case 2: {
output[o++] |= x >> 2;
output[o] = (x & 3) << 6;
} break;
case 3: {
output[o++] |= x;
} break;
}
}
outlength = o;
return true;
}
private:
static char enc(uint8_t n) {
static char lookup_table[] = "ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz0123456789-_";
return lookup_table[n & 63];
}
static uint8_t dec(char n) {
if(n >= 'A' && n <= 'Z') return n - 'A';
if(n >= 'a' && n <= 'z') return n - 'a' + 26;
if(n >= '0' && n <= '9') return n - '0' + 52;
if(n == '-') return 62;
if(n == '_') return 63;
return 0;
}
};
}
#endif

51
snesfilter/nall/bit.hpp Normal file
View File

@@ -0,0 +1,51 @@
#ifndef NALL_BIT_HPP
#define NALL_BIT_HPP
namespace nall {
template<int bits> inline unsigned uclamp(const unsigned x) {
enum { y = (1U << bits) - 1 };
return y + ((x - y) & -(x < y)); //min(x, y);
}
template<int bits> inline unsigned uclip(const unsigned x) {
enum { m = (1U << bits) - 1 };
return (x & m);
}
template<int bits> inline signed sclamp(const signed x) {
enum { b = 1U << (bits - 1), m = (1U << (bits - 1)) - 1 };
return (x > m) ? m : (x < -b) ? -b : x;
}
template<int bits> inline signed sclip(const signed x) {
enum { b = 1U << (bits - 1), m = (1U << bits) - 1 };
return ((x & m) ^ b) - b;
}
namespace bit {
//lowest(0b1110) == 0b0010
template<typename T> inline T lowest(const T x) {
return x & -x;
}
//clear_lowest(0b1110) == 0b1100
template<typename T> inline T clear_lowest(const T x) {
return x & (x - 1);
}
//set_lowest(0b0101) == 0b0111
template<typename T> inline T set_lowest(const T x) {
return x | (x + 1);
}
//round up to next highest single bit:
//round(15) == 16, round(16) == 16, round(17) == 32
inline unsigned round(unsigned x) {
if((x & (x - 1)) == 0) return x;
while(x & (x - 1)) x &= x - 1;
return x << 1;
}
}
}
#endif

View File

@@ -0,0 +1,34 @@
#ifndef NALL_CONCEPT_HPP
#define NALL_CONCEPT_HPP
#include <nall/static.hpp>
#include <nall/utility.hpp>
namespace nall {
//unsigned count() const;
template<typename T> struct has_count { enum { value = false }; };
//unsigned length() const;
template<typename T> struct has_length { enum { value = false }; };
//unsigned size() const;
template<typename T> struct has_size { enum { value = false }; };
template<typename T> unsigned container_size(const T& object, typename mp_enable_if<has_count<T>>::type = 0) {
return object.count();
}
template<typename T> unsigned container_size(const T& object, typename mp_enable_if<has_length<T>>::type = 0) {
return object.length();
}
template<typename T> unsigned container_size(const T& object, typename mp_enable_if<has_size<T>>::type = 0) {
return object.size();
}
template<typename T> unsigned container_size(const T& object, typename mp_enable_if<std::is_array<T>>::type = 0) {
return sizeof(T) / sizeof(typename std::remove_extent<T>::type);
}
}
#endif

123
snesfilter/nall/config.hpp Normal file
View File

@@ -0,0 +1,123 @@
#ifndef NALL_CONFIG_HPP
#define NALL_CONFIG_HPP
#include <nall/file.hpp>
#include <nall/string.hpp>
#include <nall/vector.hpp>
namespace nall {
namespace configuration_traits {
template<typename T> struct is_boolean { enum { value = false }; };
template<> struct is_boolean<bool> { enum { value = true }; };
template<typename T> struct is_signed { enum { value = false }; };
template<> struct is_signed<signed> { enum { value = true }; };
template<typename T> struct is_unsigned { enum { value = false }; };
template<> struct is_unsigned<unsigned> { enum { value = true }; };
template<typename T> struct is_double { enum { value = false }; };
template<> struct is_double<double> { enum { value = true }; };
template<typename T> struct is_string { enum { value = false }; };
template<> struct is_string<string> { enum { value = true }; };
}
class configuration {
public:
enum type_t { boolean_t, signed_t, unsigned_t, double_t, string_t, unknown_t };
struct item_t {
uintptr_t data;
string name;
string desc;
type_t type;
string get() const {
switch(type) {
case boolean_t: return string() << *(bool*)data;
case signed_t: return string() << *(signed*)data;
case unsigned_t: return string() << *(unsigned*)data;
case double_t: return string() << *(double*)data;
case string_t: return string() << "\"" << *(string*)data << "\"";
}
return "???";
}
void set(string s) {
switch(type) {
case boolean_t: *(bool*)data = (s == "true"); break;
case signed_t: *(signed*)data = strsigned(s); break;
case unsigned_t: *(unsigned*)data = strunsigned(s); break;
case double_t: *(double*)data = strdouble(s); break;
case string_t: trim(s, "\""); *(string*)data = s; break;
}
}
};
linear_vector<item_t> list;
template<typename T>
void attach(T &data, const char *name, const char *desc = "") {
unsigned n = list.size();
list[n].data = (uintptr_t)&data;
list[n].name = name;
list[n].desc = desc;
if(configuration_traits::is_boolean<T>::value) list[n].type = boolean_t;
else if(configuration_traits::is_signed<T>::value) list[n].type = signed_t;
else if(configuration_traits::is_unsigned<T>::value) list[n].type = unsigned_t;
else if(configuration_traits::is_double<T>::value) list[n].type = double_t;
else if(configuration_traits::is_string<T>::value) list[n].type = string_t;
else list[n].type = unknown_t;
}
virtual bool load(const char *filename) {
string data;
if(data.readfile(filename) == true) {
data.replace("\r", "");
lstring line;
line.split("\n", data);
for(unsigned i = 0; i < line.size(); i++) {
if(auto position = qstrpos(line[i], "#")) line[i][position()] = 0;
if(!qstrpos(line[i], " = ")) continue;
lstring part;
part.qsplit(" = ", line[i]);
trim(part[0]);
trim(part[1]);
for(unsigned n = 0; n < list.size(); n++) {
if(part[0] == list[n].name) {
list[n].set(part[1]);
break;
}
}
}
return true;
} else {
return false;
}
}
virtual bool save(const char *filename) const {
file fp;
if(fp.open(filename, file::mode_write)) {
for(unsigned i = 0; i < list.size(); i++) {
string output;
output << list[i].name << " = " << list[i].get();
if(list[i].desc != "") output << " # " << list[i].desc;
output << "\r\n";
fp.print(output);
}
fp.close();
return true;
} else {
return false;
}
}
};
}
#endif

66
snesfilter/nall/crc32.hpp Normal file
View File

@@ -0,0 +1,66 @@
#ifndef NALL_CRC32_HPP
#define NALL_CRC32_HPP
#include <nall/stdint.hpp>
namespace nall {
const uint32_t crc32_table[256] = {
0x00000000, 0x77073096, 0xee0e612c, 0x990951ba, 0x076dc419, 0x706af48f,
0xe963a535, 0x9e6495a3, 0x0edb8832, 0x79dcb8a4, 0xe0d5e91e, 0x97d2d988,
0x09b64c2b, 0x7eb17cbd, 0xe7b82d07, 0x90bf1d91, 0x1db71064, 0x6ab020f2,
0xf3b97148, 0x84be41de, 0x1adad47d, 0x6ddde4eb, 0xf4d4b551, 0x83d385c7,
0x136c9856, 0x646ba8c0, 0xfd62f97a, 0x8a65c9ec, 0x14015c4f, 0x63066cd9,
0xfa0f3d63, 0x8d080df5, 0x3b6e20c8, 0x4c69105e, 0xd56041e4, 0xa2677172,
0x3c03e4d1, 0x4b04d447, 0xd20d85fd, 0xa50ab56b, 0x35b5a8fa, 0x42b2986c,
0xdbbbc9d6, 0xacbcf940, 0x32d86ce3, 0x45df5c75, 0xdcd60dcf, 0xabd13d59,
0x26d930ac, 0x51de003a, 0xc8d75180, 0xbfd06116, 0x21b4f4b5, 0x56b3c423,
0xcfba9599, 0xb8bda50f, 0x2802b89e, 0x5f058808, 0xc60cd9b2, 0xb10be924,
0x2f6f7c87, 0x58684c11, 0xc1611dab, 0xb6662d3d, 0x76dc4190, 0x01db7106,
0x98d220bc, 0xefd5102a, 0x71b18589, 0x06b6b51f, 0x9fbfe4a5, 0xe8b8d433,
0x7807c9a2, 0x0f00f934, 0x9609a88e, 0xe10e9818, 0x7f6a0dbb, 0x086d3d2d,
0x91646c97, 0xe6635c01, 0x6b6b51f4, 0x1c6c6162, 0x856530d8, 0xf262004e,
0x6c0695ed, 0x1b01a57b, 0x8208f4c1, 0xf50fc457, 0x65b0d9c6, 0x12b7e950,
0x8bbeb8ea, 0xfcb9887c, 0x62dd1ddf, 0x15da2d49, 0x8cd37cf3, 0xfbd44c65,
0x4db26158, 0x3ab551ce, 0xa3bc0074, 0xd4bb30e2, 0x4adfa541, 0x3dd895d7,
0xa4d1c46d, 0xd3d6f4fb, 0x4369e96a, 0x346ed9fc, 0xad678846, 0xda60b8d0,
0x44042d73, 0x33031de5, 0xaa0a4c5f, 0xdd0d7cc9, 0x5005713c, 0x270241aa,
0xbe0b1010, 0xc90c2086, 0x5768b525, 0x206f85b3, 0xb966d409, 0xce61e49f,
0x5edef90e, 0x29d9c998, 0xb0d09822, 0xc7d7a8b4, 0x59b33d17, 0x2eb40d81,
0xb7bd5c3b, 0xc0ba6cad, 0xedb88320, 0x9abfb3b6, 0x03b6e20c, 0x74b1d29a,
0xead54739, 0x9dd277af, 0x04db2615, 0x73dc1683, 0xe3630b12, 0x94643b84,
0x0d6d6a3e, 0x7a6a5aa8, 0xe40ecf0b, 0x9309ff9d, 0x0a00ae27, 0x7d079eb1,
0xf00f9344, 0x8708a3d2, 0x1e01f268, 0x6906c2fe, 0xf762575d, 0x806567cb,
0x196c3671, 0x6e6b06e7, 0xfed41b76, 0x89d32be0, 0x10da7a5a, 0x67dd4acc,
0xf9b9df6f, 0x8ebeeff9, 0x17b7be43, 0x60b08ed5, 0xd6d6a3e8, 0xa1d1937e,
0x38d8c2c4, 0x4fdff252, 0xd1bb67f1, 0xa6bc5767, 0x3fb506dd, 0x48b2364b,
0xd80d2bda, 0xaf0a1b4c, 0x36034af6, 0x41047a60, 0xdf60efc3, 0xa867df55,
0x316e8eef, 0x4669be79, 0xcb61b38c, 0xbc66831a, 0x256fd2a0, 0x5268e236,
0xcc0c7795, 0xbb0b4703, 0x220216b9, 0x5505262f, 0xc5ba3bbe, 0xb2bd0b28,
0x2bb45a92, 0x5cb36a04, 0xc2d7ffa7, 0xb5d0cf31, 0x2cd99e8b, 0x5bdeae1d,
0x9b64c2b0, 0xec63f226, 0x756aa39c, 0x026d930a, 0x9c0906a9, 0xeb0e363f,
0x72076785, 0x05005713, 0x95bf4a82, 0xe2b87a14, 0x7bb12bae, 0x0cb61b38,
0x92d28e9b, 0xe5d5be0d, 0x7cdcefb7, 0x0bdbdf21, 0x86d3d2d4, 0xf1d4e242,
0x68ddb3f8, 0x1fda836e, 0x81be16cd, 0xf6b9265b, 0x6fb077e1, 0x18b74777,
0x88085ae6, 0xff0f6a70, 0x66063bca, 0x11010b5c, 0x8f659eff, 0xf862ae69,
0x616bffd3, 0x166ccf45, 0xa00ae278, 0xd70dd2ee, 0x4e048354, 0x3903b3c2,
0xa7672661, 0xd06016f7, 0x4969474d, 0x3e6e77db, 0xaed16a4a, 0xd9d65adc,
0x40df0b66, 0x37d83bf0, 0xa9bcae53, 0xdebb9ec5, 0x47b2cf7f, 0x30b5ffe9,
0xbdbdf21c, 0xcabac28a, 0x53b39330, 0x24b4a3a6, 0xbad03605, 0xcdd70693,
0x54de5729, 0x23d967bf, 0xb3667a2e, 0xc4614ab8, 0x5d681b02, 0x2a6f2b94,
0xb40bbe37, 0xc30c8ea1, 0x5a05df1b, 0x2d02ef8d
};
inline uint32_t crc32_adjust(uint32_t crc32, uint8_t input) {
return ((crc32 >> 8) & 0x00ffffff) ^ crc32_table[(crc32 ^ input) & 0xff];
}
inline uint32_t crc32_calculate(const uint8_t *data, unsigned length) {
uint32_t crc32 = ~0;
for(unsigned i = 0; i < length; i++) {
crc32 = crc32_adjust(crc32, data[i]);
}
return ~crc32;
}
}
#endif

View File

@@ -23,8 +23,8 @@
#if defined(__i386__) || defined(__amd64__) || defined(_M_IX86) || defined(_M_AMD64)
#define ARCH_LSB
#elif defined(__powerpc__) || defined(_M_PPC)
#elif defined(__powerpc__) || defined(_M_PPC) || defined(__BIG_ENDIAN__)
#define ARCH_MSB
#endif
#endif //ifndef NALL_DETECT_HPP
#endif

View File

@@ -0,0 +1,75 @@
#ifndef NALL_DICTIONARY_HPP
#define NALL_DICTIONARY_HPP
#include <nall/array.hpp>
#include <nall/string.hpp>
#include <nall/utility.hpp>
namespace nall {
class dictionary {
public:
string operator[](const char *input) {
for(unsigned i = 0; i < index_input.size(); i++) {
if(index_input[i] == input) return index_output[i];
}
//no match, use input; remove input identifier, if one exists
if(strbegin(input, "{{")) {
if(auto pos = strpos(input, "}}")) {
string temp = substr(input, pos() + 2);
return temp;
}
}
return input;
}
bool import(const char *filename) {
string data;
if(data.readfile(filename) == false) return false;
ltrim_once(data, "\xef\xbb\xbf"); //remove UTF-8 marker, if it exists
data.replace("\r", "");
lstring line;
line.split("\n", data);
for(unsigned i = 0; i < line.size(); i++) {
lstring part;
//format: "Input" = "Output"
part.qsplit("=", line[i]);
if(part.size() != 2) continue;
//remove whitespace
trim(part[0]);
trim(part[1]);
//remove quotes
trim_once(part[0], "\"");
trim_once(part[1], "\"");
unsigned n = index_input.size();
index_input[n] = part[0];
index_output[n] = part[1];
}
return true;
}
void reset() {
index_input.reset();
index_output.reset();
}
~dictionary() {
reset();
}
dictionary& operator=(const dictionary&) = delete;
dictionary(const dictionary&) = delete;
protected:
lstring index_input;
lstring index_output;
};
}
#endif

119
snesfilter/nall/dl.hpp Normal file
View File

@@ -0,0 +1,119 @@
#ifndef NALL_DL_HPP
#define NALL_DL_HPP
//dynamic linking support
#include <string.h>
#include <nall/detect.hpp>
#include <nall/stdint.hpp>
#include <nall/utility.hpp>
#if defined(PLATFORM_X) || defined(PLATFORM_OSX)
#include <dlfcn.h>
#elif defined(PLATFORM_WIN)
#include <windows.h>
#include <nall/utf8.hpp>
#endif
namespace nall {
struct library {
bool opened() const { return handle; }
bool open(const char*);
void* sym(const char*);
void close();
library() : handle(0) {}
~library() { close(); }
library& operator=(const library&) = delete;
library(const library&) = delete;
private:
uintptr_t handle;
};
#if defined(PLATFORM_X)
inline bool library::open(const char *name) {
if(handle) close();
char *t = new char[strlen(name) + 256];
strcpy(t, "lib");
strcat(t, name);
strcat(t, ".so");
handle = (uintptr_t)dlopen(t, RTLD_LAZY);
if(!handle) {
strcpy(t, "/usr/local/lib/lib");
strcat(t, name);
strcat(t, ".so");
handle = (uintptr_t)dlopen(t, RTLD_LAZY);
}
delete[] t;
return handle;
}
inline void* library::sym(const char *name) {
if(!handle) return 0;
return dlsym((void*)handle, name);
}
inline void library::close() {
if(!handle) return;
dlclose((void*)handle);
handle = 0;
}
#elif defined(PLATFORM_OSX)
inline bool library::open(const char *name) {
if(handle) close();
char *t = new char[strlen(name) + 256];
strcpy(t, "lib");
strcat(t, name);
strcat(t, ".dylib");
handle = (uintptr_t)dlopen(t, RTLD_LAZY);
if(!handle) {
strcpy(t, "/usr/local/lib/lib");
strcat(t, name);
strcat(t, ".dylib");
handle = (uintptr_t)dlopen(t, RTLD_LAZY);
}
delete[] t;
return handle;
}
inline void* library::sym(const char *name) {
if(!handle) return 0;
return dlsym((void*)handle, name);
}
inline void library::close() {
if(!handle) return;
dlclose((void*)handle);
handle = 0;
}
#elif defined(PLATFORM_WIN)
inline bool library::open(const char *name) {
if(handle) close();
char *t = new char[strlen(name) + 8];
strcpy(t, name);
strcat(t, ".dll");
handle = (uintptr_t)LoadLibraryW(utf16_t(t));
delete[] t;
return handle;
}
inline void* library::sym(const char *name) {
if(!handle) return 0;
return (void*)GetProcAddress((HMODULE)handle, name);
}
inline void library::close() {
if(!handle) return;
FreeLibrary((HMODULE)handle);
handle = 0;
}
#else
inline bool library::open(const char*) { return false; }
inline void* library::sym(const char*) { return 0; }
inline void library::close() {}
#endif
};
#endif

View File

@@ -35,4 +35,4 @@
#define order_msb8(a,b,c,d,e,f,g,h) a,b,c,d,e,f,g,h
#endif
#endif //ifndef NALL_ENDIAN_HPP
#endif

259
snesfilter/nall/file.hpp Normal file
View File

@@ -0,0 +1,259 @@
#ifndef NALL_FILE_HPP
#define NALL_FILE_HPP
#include <stdio.h>
#include <string.h>
#if !defined(_WIN32)
#include <unistd.h>
#else
#include <io.h>
#endif
#include <nall/stdint.hpp>
#include <nall/utf8.hpp>
#include <nall/utility.hpp>
namespace nall {
inline FILE* fopen_utf8(const char *utf8_filename, const char *mode) {
#if !defined(_WIN32)
return fopen(utf8_filename, mode);
#else
return _wfopen(utf16_t(utf8_filename), utf16_t(mode));
#endif
}
class file {
public:
enum FileMode { mode_read, mode_write, mode_readwrite, mode_writeread };
enum SeekMode { seek_absolute, seek_relative };
uint8_t read() {
if(!fp) return 0xff; //file not open
if(file_mode == mode_write) return 0xff; //reads not permitted
if(file_offset >= file_size) return 0xff; //cannot read past end of file
buffer_sync();
return buffer[(file_offset++) & buffer_mask];
}
uintmax_t readl(unsigned length = 1) {
uintmax_t data = 0;
for(int i = 0; i < length; i++) {
data |= (uintmax_t)read() << (i << 3);
}
return data;
}
uintmax_t readm(unsigned length = 1) {
uintmax_t data = 0;
while(length--) {
data <<= 8;
data |= read();
}
return data;
}
void read(uint8_t *buffer, unsigned length) {
while(length--) *buffer++ = read();
}
void write(uint8_t data) {
if(!fp) return; //file not open
if(file_mode == mode_read) return; //writes not permitted
buffer_sync();
buffer[(file_offset++) & buffer_mask] = data;
buffer_dirty = true;
if(file_offset > file_size) file_size = file_offset;
}
void writel(uintmax_t data, unsigned length = 1) {
while(length--) {
write(data);
data >>= 8;
}
}
void writem(uintmax_t data, unsigned length = 1) {
for(int i = length - 1; i >= 0; i--) {
write(data >> (i << 3));
}
}
void write(const uint8_t *buffer, unsigned length) {
while(length--) write(*buffer++);
}
void print(const char *string) {
if(!string) return;
while(*string) write(*string++);
}
void flush() {
buffer_flush();
fflush(fp);
}
void seek(int offset, SeekMode mode = seek_absolute) {
if(!fp) return; //file not open
buffer_flush();
uintmax_t req_offset = file_offset;
switch(mode) {
case seek_absolute: req_offset = offset; break;
case seek_relative: req_offset += offset; break;
}
if(req_offset < 0) req_offset = 0; //cannot seek before start of file
if(req_offset > file_size) {
if(file_mode == mode_read) { //cannot seek past end of file
req_offset = file_size;
} else { //pad file to requested location
file_offset = file_size;
while(file_size < req_offset) write(0x00);
}
}
file_offset = req_offset;
}
int offset() {
if(!fp) return -1; //file not open
return file_offset;
}
int size() {
if(!fp) return -1; //file not open
return file_size;
}
bool truncate(unsigned size) {
if(!fp) return false; //file not open
#if !defined(_WIN32)
return ftruncate(fileno(fp), size) == 0;
#else
return _chsize(fileno(fp), size) == 0;
#endif
}
bool end() {
if(!fp) return true; //file not open
return file_offset >= file_size;
}
static bool exists(const char *fn) {
#if !defined(_WIN32)
FILE *fp = fopen(fn, "rb");
#else
FILE *fp = _wfopen(utf16_t(fn), L"rb");
#endif
if(fp) {
fclose(fp);
return true;
}
return false;
}
static unsigned size(const char *fn) {
#if !defined(_WIN32)
FILE *fp = fopen(fn, "rb");
#else
FILE *fp = _wfopen(utf16_t(fn), L"rb");
#endif
unsigned filesize = 0;
if(fp) {
fseek(fp, 0, SEEK_END);
filesize = ftell(fp);
fclose(fp);
}
return filesize;
}
bool open() {
return fp;
}
bool open(const char *fn, FileMode mode) {
if(fp) return false;
switch(file_mode = mode) {
#if !defined(_WIN32)
case mode_read: fp = fopen(fn, "rb"); break;
case mode_write: fp = fopen(fn, "wb+"); break; //need read permission for buffering
case mode_readwrite: fp = fopen(fn, "rb+"); break;
case mode_writeread: fp = fopen(fn, "wb+"); break;
#else
case mode_read: fp = _wfopen(utf16_t(fn), L"rb"); break;
case mode_write: fp = _wfopen(utf16_t(fn), L"wb+"); break;
case mode_readwrite: fp = _wfopen(utf16_t(fn), L"rb+"); break;
case mode_writeread: fp = _wfopen(utf16_t(fn), L"wb+"); break;
#endif
}
if(!fp) return false;
buffer_offset = -1; //invalidate buffer
file_offset = 0;
fseek(fp, 0, SEEK_END);
file_size = ftell(fp);
fseek(fp, 0, SEEK_SET);
return true;
}
void close() {
if(!fp) return;
buffer_flush();
fclose(fp);
fp = 0;
}
file() {
memset(buffer, 0, sizeof buffer);
buffer_offset = -1;
buffer_dirty = false;
fp = 0;
file_offset = 0;
file_size = 0;
file_mode = mode_read;
}
~file() {
close();
}
file& operator=(const file&) = delete;
file(const file&) = delete;
private:
enum { buffer_size = 1 << 12, buffer_mask = buffer_size - 1 };
char buffer[buffer_size];
int buffer_offset;
bool buffer_dirty;
FILE *fp;
unsigned file_offset;
unsigned file_size;
FileMode file_mode;
void buffer_sync() {
if(!fp) return; //file not open
if(buffer_offset != (file_offset & ~buffer_mask)) {
buffer_flush();
buffer_offset = file_offset & ~buffer_mask;
fseek(fp, buffer_offset, SEEK_SET);
unsigned length = (buffer_offset + buffer_size) <= file_size ? buffer_size : (file_size & buffer_mask);
if(length) unsigned unused = fread(buffer, 1, length, fp);
}
}
void buffer_flush() {
if(!fp) return; //file not open
if(file_mode == mode_read) return; //buffer cannot be written to
if(buffer_offset < 0) return; //buffer unused
if(buffer_dirty == false) return; //buffer unmodified since read
fseek(fp, buffer_offset, SEEK_SET);
unsigned length = (buffer_offset + buffer_size) <= file_size ? buffer_size : (file_size & buffer_mask);
if(length) unsigned unused = fwrite(buffer, 1, length, fp);
buffer_offset = -1; //invalidate buffer
buffer_dirty = false;
}
};
}
#endif

190
snesfilter/nall/filemap.hpp Normal file
View File

@@ -0,0 +1,190 @@
#ifndef NALL_FILEMAP_HPP
#define NALL_FILEMAP_HPP
#include <nall/stdint.hpp>
#include <nall/utf8.hpp>
#include <stdio.h>
#include <stdlib.h>
#if defined(_WIN32)
#include <windows.h>
#else
#include <fcntl.h>
#include <unistd.h>
#include <sys/mman.h>
#include <sys/stat.h>
#include <sys/types.h>
#endif
namespace nall {
class filemap {
public:
enum filemode { mode_read, mode_write, mode_readwrite, mode_writeread };
bool open(const char *filename, filemode mode) { return p_open(filename, mode); }
void close() { return p_close(); }
unsigned size() const { return p_size; }
uint8_t* handle() { return p_handle; }
const uint8_t* handle() const { return p_handle; }
filemap() : p_size(0), p_handle(0) { p_ctor(); }
~filemap() { p_dtor(); }
private:
unsigned p_size;
uint8_t *p_handle;
#if defined(_WIN32)
//=============
//MapViewOfFile
//=============
HANDLE p_filehandle, p_maphandle;
bool p_open(const char *filename, filemode mode) {
int desired_access, creation_disposition, flprotect, map_access;
switch(mode) {
default: return false;
case mode_read:
desired_access = GENERIC_READ;
creation_disposition = OPEN_EXISTING;
flprotect = PAGE_READONLY;
map_access = FILE_MAP_READ;
break;
case mode_write:
//write access requires read access
desired_access = GENERIC_WRITE;
creation_disposition = CREATE_ALWAYS;
flprotect = PAGE_READWRITE;
map_access = FILE_MAP_ALL_ACCESS;
break;
case mode_readwrite:
desired_access = GENERIC_READ | GENERIC_WRITE;
creation_disposition = OPEN_EXISTING;
flprotect = PAGE_READWRITE;
map_access = FILE_MAP_ALL_ACCESS;
break;
case mode_writeread:
desired_access = GENERIC_READ | GENERIC_WRITE;
creation_disposition = CREATE_NEW;
flprotect = PAGE_READWRITE;
map_access = FILE_MAP_ALL_ACCESS;
break;
}
p_filehandle = CreateFileW(utf16_t(filename), desired_access, FILE_SHARE_READ, NULL,
creation_disposition, FILE_ATTRIBUTE_NORMAL, NULL);
if(p_filehandle == INVALID_HANDLE_VALUE) return false;
p_size = GetFileSize(p_filehandle, NULL);
p_maphandle = CreateFileMapping(p_filehandle, NULL, flprotect, 0, p_size, NULL);
if(p_maphandle == INVALID_HANDLE_VALUE) {
CloseHandle(p_filehandle);
p_filehandle = INVALID_HANDLE_VALUE;
return false;
}
p_handle = (uint8_t*)MapViewOfFile(p_maphandle, map_access, 0, 0, p_size);
return p_handle;
}
void p_close() {
if(p_handle) {
UnmapViewOfFile(p_handle);
p_handle = 0;
}
if(p_maphandle != INVALID_HANDLE_VALUE) {
CloseHandle(p_maphandle);
p_maphandle = INVALID_HANDLE_VALUE;
}
if(p_filehandle != INVALID_HANDLE_VALUE) {
CloseHandle(p_filehandle);
p_filehandle = INVALID_HANDLE_VALUE;
}
}
void p_ctor() {
p_filehandle = INVALID_HANDLE_VALUE;
p_maphandle = INVALID_HANDLE_VALUE;
}
void p_dtor() {
close();
}
#else
//====
//mmap
//====
int p_fd;
bool p_open(const char *filename, filemode mode) {
int open_flags, mmap_flags;
switch(mode) {
default: return false;
case mode_read:
open_flags = O_RDONLY;
mmap_flags = PROT_READ;
break;
case mode_write:
open_flags = O_RDWR | O_CREAT; //mmap() requires read access
mmap_flags = PROT_WRITE;
break;
case mode_readwrite:
open_flags = O_RDWR;
mmap_flags = PROT_READ | PROT_WRITE;
break;
case mode_writeread:
open_flags = O_RDWR | O_CREAT;
mmap_flags = PROT_READ | PROT_WRITE;
break;
}
p_fd = ::open(filename, open_flags);
if(p_fd < 0) return false;
struct stat p_stat;
fstat(p_fd, &p_stat);
p_size = p_stat.st_size;
p_handle = (uint8_t*)mmap(0, p_size, mmap_flags, MAP_SHARED, p_fd, 0);
if(p_handle == MAP_FAILED) {
p_handle = 0;
::close(p_fd);
p_fd = -1;
return false;
}
return p_handle;
}
void p_close() {
if(p_handle) {
munmap(p_handle, p_size);
p_handle = 0;
}
if(p_fd >= 0) {
::close(p_fd);
p_fd = -1;
}
}
void p_ctor() {
p_fd = -1;
}
void p_dtor() {
p_close();
}
#endif
};
}
#endif

View File

@@ -0,0 +1,12 @@
#ifndef NALL_FOREACH_HPP
#define NALL_FOREACH_HPP
#include <type_traits>
#include <nall/concept.hpp>
#undef foreach
#define foreach(iter, object) \
for(unsigned foreach_counter = 0, foreach_limit = container_size(object), foreach_once = 0, foreach_broken = 0; foreach_counter < foreach_limit && foreach_broken == 0; foreach_counter++, foreach_once = 0) \
for(auto &iter = object[foreach_counter]; foreach_once == 0 && (foreach_broken = 1); foreach_once++, foreach_broken = 0)
#endif

View File

@@ -0,0 +1,90 @@
#ifndef NALL_FUNCTION_HPP
#define NALL_FUNCTION_HPP
#include <functional>
#include <type_traits>
namespace nall {
template<typename T> class function;
template<typename R, typename... P>
class function<R (P...)> {
private:
struct base1 { virtual void func1(P...) {} };
struct base2 { virtual void func2(P...) {} };
struct derived : base1, virtual base2 {};
struct data_t {
R (*callback)(const data_t&, P...);
union {
R (*callback_global)(P...);
struct {
R (derived::*callback_member)(P...);
void *object;
};
};
} data;
static R callback_global(const data_t &data, P... p) {
return data.callback_global(p...);
}
template<typename C>
static R callback_member(const data_t &data, P... p) {
return (((C*)data.object)->*((R (C::*&)(P...))data.callback_member))(p...);
}
public:
R operator()(P... p) const { return data.callback(data, p...); }
operator bool() const { return data.callback; }
void reset() { data.callback = 0; }
function& operator=(const function &source) { memcpy(&data, &source.data, sizeof(data_t)); return *this; }
function(const function &source) { operator=(source); }
//no pointer
function() {
data.callback = 0;
}
//symbolic link pointer (nall/dl.hpp::sym, etc)
function(void *callback) {
data.callback = callback ? &callback_global : 0;
data.callback_global = (R (*)(P...))callback;
}
//global function pointer
function(R (*callback)(P...)) {
data.callback = &callback_global;
data.callback_global = callback;
}
//member function pointer
template<typename C>
function(R (C::*callback)(P...), C *object) {
static_assert(sizeof data.callback_member >= sizeof callback, "callback_member is too small");
data.callback = &callback_member<C>;
(R (C::*&)(P...))data.callback_member = callback;
data.object = object;
}
//const member function pointer
template<typename C>
function(R (C::*callback)(P...) const, C *object) {
static_assert(sizeof data.callback_member >= sizeof callback, "callback_member is too small");
data.callback = &callback_member<C>;
(R (C::*&)(P...))data.callback_member = (R (C::*&)(P...))callback;
data.object = object;
}
//lambda function pointer
template<typename T>
function(T callback) {
static_assert(std::is_same<R, typename std::result_of<T(P...)>::type>::value, "lambda mismatch");
data.callback = &callback_global;
data.callback_global = (R (*)(P...))callback;
}
};
}
#endif

386
snesfilter/nall/input.hpp Normal file
View File

@@ -0,0 +1,386 @@
#ifndef NALL_INPUT_HPP
#define NALL_INPUT_HPP
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <nall/stdint.hpp>
#include <nall/string.hpp>
namespace nall {
struct Keyboard;
Keyboard& keyboard(unsigned = 0);
static const char KeyboardScancodeName[][64] = {
"Escape", "F1", "F2", "F3", "F4", "F5", "F6", "F7", "F8", "F9", "F10", "F11", "F12",
"PrintScreen", "ScrollLock", "Pause", "Tilde",
"Num1", "Num2", "Num3", "Num4", "Num5", "Num6", "Num7", "Num8", "Num9", "Num0",
"Dash", "Equal", "Backspace",
"Insert", "Delete", "Home", "End", "PageUp", "PageDown",
"A", "B", "C", "D", "E", "F", "G", "H", "I", "J", "K", "L", "M",
"N", "O", "P", "Q", "R", "S", "T", "U", "V", "W", "X", "Y", "Z",
"LeftBracket", "RightBracket", "Backslash", "Semicolon", "Apostrophe", "Comma", "Period", "Slash",
"Keypad1", "Keypad2", "Keypad3", "Keypad4", "Keypad5", "Keypad6", "Keypad7", "Keypad8", "Keypad9", "Keypad0",
"Point", "Enter", "Add", "Subtract", "Multiply", "Divide",
"NumLock", "CapsLock",
"Up", "Down", "Left", "Right",
"Tab", "Return", "Spacebar", "Menu",
"Shift", "Control", "Alt", "Super",
};
struct Keyboard {
const unsigned ID;
enum { Base = 1 };
enum { Count = 8, Size = 128 };
enum Scancode {
Escape, F1, F2, F3, F4, F5, F6, F7, F8, F9, F10, F11, F12,
PrintScreen, ScrollLock, Pause, Tilde,
Num1, Num2, Num3, Num4, Num5, Num6, Num7, Num8, Num9, Num0,
Dash, Equal, Backspace,
Insert, Delete, Home, End, PageUp, PageDown,
A, B, C, D, E, F, G, H, I, J, K, L, M,
N, O, P, Q, R, S, T, U, V, W, X, Y, Z,
LeftBracket, RightBracket, Backslash, Semicolon, Apostrophe, Comma, Period, Slash,
Keypad1, Keypad2, Keypad3, Keypad4, Keypad5, Keypad6, Keypad7, Keypad8, Keypad9, Keypad0,
Point, Enter, Add, Subtract, Multiply, Divide,
NumLock, CapsLock,
Up, Down, Left, Right,
Tab, Return, Spacebar, Menu,
Shift, Control, Alt, Super,
Limit,
};
static signed numberDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(keyboard(i).belongsTo(scancode)) return i;
}
return -1;
}
static signed keyDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(keyboard(i).isKey(scancode)) return scancode - keyboard(i).key(Escape);
}
return -1;
}
static signed modifierDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(keyboard(i).isModifier(scancode)) return scancode - keyboard(i).key(Shift);
}
return -1;
}
static bool isAnyKey(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(keyboard(i).isKey(scancode)) return true;
}
return false;
}
static bool isAnyModifier(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(keyboard(i).isModifier(scancode)) return true;
}
return false;
}
static uint16_t decode(const char *name) {
string s(name);
if(!strbegin(name, "KB")) return 0;
ltrim(s, "KB");
unsigned id = strunsigned(s);
auto pos = strpos(s, "::");
if(!pos) return 0;
s = substr(s, pos() + 2);
for(unsigned i = 0; i < Limit; i++) {
if(s == KeyboardScancodeName[i]) return Base + Size * id + i;
}
return 0;
}
string encode(uint16_t code) const {
unsigned index = 0;
for(unsigned i = 0; i < Count; i++) {
if(code >= Base + Size * i && code < Base + Size * (i + 1)) {
index = code - (Base + Size * i);
break;
}
}
return string() << "KB" << ID << "::" << KeyboardScancodeName[index];
}
uint16_t operator[](Scancode code) const { return Base + ID * Size + code; }
uint16_t key(unsigned id) const { return Base + Size * ID + id; }
bool isKey(unsigned id) const { return id >= key(Escape) && id <= key(Menu); }
bool isModifier(unsigned id) const { return id >= key(Shift) && id <= key(Super); }
bool belongsTo(uint16_t scancode) const { return isKey(scancode) || isModifier(scancode); }
Keyboard(unsigned ID_) : ID(ID_) {}
};
inline Keyboard& keyboard(unsigned id) {
static Keyboard kb0(0), kb1(1), kb2(2), kb3(3), kb4(4), kb5(5), kb6(6), kb7(7);
switch(id) { default:
case 0: return kb0; case 1: return kb1; case 2: return kb2; case 3: return kb3;
case 4: return kb4; case 5: return kb5; case 6: return kb6; case 7: return kb7;
}
}
static const char MouseScancodeName[][64] = {
"Xaxis", "Yaxis", "Zaxis",
"Button0", "Button1", "Button2", "Button3", "Button4", "Button5", "Button6", "Button7",
};
struct Mouse;
Mouse& mouse(unsigned = 0);
struct Mouse {
const unsigned ID;
enum { Base = Keyboard::Base + Keyboard::Size * Keyboard::Count };
enum { Count = 8, Size = 16 };
enum { Axes = 3, Buttons = 8 };
enum Scancode {
Xaxis, Yaxis, Zaxis,
Button0, Button1, Button2, Button3, Button4, Button5, Button6, Button7,
Limit,
};
static signed numberDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(mouse(i).belongsTo(scancode)) return i;
}
return -1;
}
static signed axisDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(mouse(i).isAxis(scancode)) return scancode - mouse(i).axis(0);
}
return -1;
}
static signed buttonDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(mouse(i).isButton(scancode)) return scancode - mouse(i).button(0);
}
return -1;
}
static bool isAnyAxis(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(mouse(i).isAxis(scancode)) return true;
}
return false;
}
static bool isAnyButton(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(mouse(i).isButton(scancode)) return true;
}
return false;
}
static uint16_t decode(const char *name) {
string s(name);
if(!strbegin(name, "MS")) return 0;
ltrim(s, "MS");
unsigned id = strunsigned(s);
auto pos = strpos(s, "::");
if(!pos) return 0;
s = substr(s, pos() + 2);
for(unsigned i = 0; i < Limit; i++) {
if(s == MouseScancodeName[i]) return Base + Size * id + i;
}
return 0;
}
string encode(uint16_t code) const {
unsigned index = 0;
for(unsigned i = 0; i < Count; i++) {
if(code >= Base + Size * i && code < Base + Size * (i + 1)) {
index = code - (Base + Size * i);
break;
}
}
return string() << "MS" << ID << "::" << MouseScancodeName[index];
}
uint16_t operator[](Scancode code) const { return Base + ID * Size + code; }
uint16_t axis(unsigned id) const { return Base + Size * ID + Xaxis + id; }
uint16_t button(unsigned id) const { return Base + Size * ID + Button0 + id; }
bool isAxis(unsigned id) const { return id >= axis(0) && id <= axis(2); }
bool isButton(unsigned id) const { return id >= button(0) && id <= button(7); }
bool belongsTo(uint16_t scancode) const { return isAxis(scancode) || isButton(scancode); }
Mouse(unsigned ID_) : ID(ID_) {}
};
inline Mouse& mouse(unsigned id) {
static Mouse ms0(0), ms1(1), ms2(2), ms3(3), ms4(4), ms5(5), ms6(6), ms7(7);
switch(id) { default:
case 0: return ms0; case 1: return ms1; case 2: return ms2; case 3: return ms3;
case 4: return ms4; case 5: return ms5; case 6: return ms6; case 7: return ms7;
}
}
static const char JoypadScancodeName[][64] = {
"Hat0", "Hat1", "Hat2", "Hat3", "Hat4", "Hat5", "Hat6", "Hat7",
"Axis0", "Axis1", "Axis2", "Axis3", "Axis4", "Axis5", "Axis6", "Axis7",
"Axis8", "Axis9", "Axis10", "Axis11", "Axis12", "Axis13", "Axis14", "Axis15",
"Button0", "Button1", "Button2", "Button3", "Button4", "Button5", "Button6", "Button7",
"Button8", "Button9", "Button10", "Button11", "Button12", "Button13", "Button14", "Button15",
"Button16", "Button17", "Button18", "Button19", "Button20", "Button21", "Button22", "Button23",
"Button24", "Button25", "Button26", "Button27", "Button28", "Button29", "Button30", "Button31",
};
struct Joypad;
Joypad& joypad(unsigned = 0);
struct Joypad {
const unsigned ID;
enum { Base = Mouse::Base + Mouse::Size * Mouse::Count };
enum { Count = 8, Size = 64 };
enum { Hats = 8, Axes = 16, Buttons = 32 };
enum Scancode {
Hat0, Hat1, Hat2, Hat3, Hat4, Hat5, Hat6, Hat7,
Axis0, Axis1, Axis2, Axis3, Axis4, Axis5, Axis6, Axis7,
Axis8, Axis9, Axis10, Axis11, Axis12, Axis13, Axis14, Axis15,
Button0, Button1, Button2, Button3, Button4, Button5, Button6, Button7,
Button8, Button9, Button10, Button11, Button12, Button13, Button14, Button15,
Button16, Button17, Button18, Button19, Button20, Button21, Button22, Button23,
Button24, Button25, Button26, Button27, Button28, Button29, Button30, Button31,
Limit,
};
enum Hat { HatCenter = 0, HatUp = 1, HatRight = 2, HatDown = 4, HatLeft = 8 };
static signed numberDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(joypad(i).belongsTo(scancode)) return i;
}
return -1;
}
static signed hatDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(joypad(i).isHat(scancode)) return scancode - joypad(i).hat(0);
}
return -1;
}
static signed axisDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(joypad(i).isAxis(scancode)) return scancode - joypad(i).axis(0);
}
return -1;
}
static signed buttonDecode(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(joypad(i).isButton(scancode)) return scancode - joypad(i).button(0);
}
return -1;
}
static bool isAnyHat(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(joypad(i).isHat(scancode)) return true;
}
return false;
}
static bool isAnyAxis(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(joypad(i).isAxis(scancode)) return true;
}
return false;
}
static bool isAnyButton(uint16_t scancode) {
for(unsigned i = 0; i < Count; i++) {
if(joypad(i).isButton(scancode)) return true;
}
return false;
}
static uint16_t decode(const char *name) {
string s(name);
if(!strbegin(name, "JP")) return 0;
ltrim(s, "JP");
unsigned id = strunsigned(s);
auto pos = strpos(s, "::");
if(!pos) return 0;
s = substr(s, pos() + 2);
for(unsigned i = 0; i < Limit; i++) {
if(s == JoypadScancodeName[i]) return Base + Size * id + i;
}
return 0;
}
string encode(uint16_t code) const {
unsigned index = 0;
for(unsigned i = 0; i < Count; i++) {
if(code >= Base + Size * i && code < Base + Size * (i + 1)) {
index = code - (Base + Size * i);
}
}
return string() << "JP" << ID << "::" << JoypadScancodeName[index];
}
uint16_t operator[](Scancode code) const { return Base + ID * Size + code; }
uint16_t hat(unsigned id) const { return Base + Size * ID + Hat0 + id; }
uint16_t axis(unsigned id) const { return Base + Size * ID + Axis0 + id; }
uint16_t button(unsigned id) const { return Base + Size * ID + Button0 + id; }
bool isHat(unsigned id) const { return id >= hat(0) && id <= hat(7); }
bool isAxis(unsigned id) const { return id >= axis(0) && id <= axis(15); }
bool isButton(unsigned id) const { return id >= button(0) && id <= button(31); }
bool belongsTo(uint16_t scancode) const { return isHat(scancode) || isAxis(scancode) || isButton(scancode); }
Joypad(unsigned ID_) : ID(ID_) {}
};
inline Joypad& joypad(unsigned id) {
static Joypad jp0(0), jp1(1), jp2(2), jp3(3), jp4(4), jp5(5), jp6(6), jp7(7);
switch(id) { default:
case 0: return jp0; case 1: return jp1; case 2: return jp2; case 3: return jp3;
case 4: return jp4; case 5: return jp5; case 6: return jp6; case 7: return jp7;
}
}
struct Scancode {
enum { None = 0, Limit = Joypad::Base + Joypad::Size * Joypad::Count };
static uint16_t decode(const char *name) {
uint16_t code;
code = Keyboard::decode(name);
if(code) return code;
code = Mouse::decode(name);
if(code) return code;
code = Joypad::decode(name);
if(code) return code;
return None;
}
static string encode(uint16_t code) {
for(unsigned i = 0; i < Keyboard::Count; i++) {
if(keyboard(i).belongsTo(code)) return keyboard(i).encode(code);
}
for(unsigned i = 0; i < Mouse::Count; i++) {
if(mouse(i).belongsTo(code)) return mouse(i).encode(code);
}
for(unsigned i = 0; i < Joypad::Count; i++) {
if(joypad(i).belongsTo(code)) return joypad(i).encode(code);
}
return "None";
}
};
}
#endif

81
snesfilter/nall/lzss.hpp Normal file
View File

@@ -0,0 +1,81 @@
#ifndef NALL_LZSS_HPP
#define NALL_LZSS_HPP
#include <nall/array.hpp>
#include <nall/new.hpp>
#include <nall/stdint.hpp>
namespace nall {
class lzss {
public:
static bool encode(uint8_t *&output, unsigned &outlength, const uint8_t *input, unsigned inlength) {
output = new(zeromemory) uint8_t[inlength * 9 / 8 + 9];
unsigned i = 0, o = 0;
while(i < inlength) {
unsigned flagoffset = o++;
uint8_t flag = 0x00;
for(unsigned b = 0; b < 8 && i < inlength; b++) {
unsigned longest = 0, pointer;
for(unsigned index = 1; index < 4096; index++) {
unsigned count = 0;
while(true) {
if(count >= 15 + 3) break; //verify pattern match is not longer than max length
if(i + count >= inlength) break; //verify pattern match does not read past end of input
if(i + count < index) break; //verify read is not before start of input
if(input[i + count] != input[i + count - index]) break; //verify pattern still matches
count++;
}
if(count > longest) {
longest = count;
pointer = index;
}
}
if(longest < 3) output[o++] = input[i++];
else {
flag |= 1 << b;
uint16_t x = ((longest - 3) << 12) + pointer;
output[o++] = x;
output[o++] = x >> 8;
i += longest;
}
}
output[flagoffset] = flag;
}
outlength = o;
return true;
}
static bool decode(uint8_t *&output, const uint8_t *input, unsigned length) {
output = new(zeromemory) uint8_t[length];
unsigned i = 0, o = 0;
while(o < length) {
uint8_t flag = input[i++];
for(unsigned b = 0; b < 8 && o < length; b++) {
if(!(flag & (1 << b))) output[o++] = input[i++];
else {
uint16_t offset = input[i++];
offset += input[i++] << 8;
uint16_t lookuplength = (offset >> 12) + 3;
offset &= 4095;
for(unsigned index = 0; index < lookuplength && o + index < length; index++) {
output[o + index] = output[o + index - offset];
}
o += lookuplength;
}
}
}
return true;
}
};
}
#endif

View File

@@ -0,0 +1,40 @@
#ifndef NALL_MODULO_HPP
#define NALL_MODULO_HPP
#include <nall/serializer.hpp>
namespace nall {
template<typename T, int size> class modulo_array {
public:
inline T operator[](int index) const {
return buffer[size + index];
}
inline T read(int index) const {
return buffer[size + index];
}
inline void write(unsigned index, const T value) {
buffer[index] =
buffer[index + size] =
buffer[index + size + size] = value;
}
void serialize(serializer &s) {
s.array(buffer, size * 3);
}
modulo_array() {
buffer = new T[size * 3]();
}
~modulo_array() {
delete[] buffer;
}
private:
T *buffer;
};
}
#endif

View File

@@ -0,0 +1,80 @@
#ifndef NALL_PLATFORM_HPP
#define NALL_PLATFORM_HPP
#include <nall/utf8.hpp>
//=========================
//standard platform headers
//=========================
#include <limits>
#include <assert.h>
#include <limits.h>
#include <math.h>
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#if defined(_WIN32)
#include <io.h>
#include <direct.h>
#include <shlobj.h>
#undef interface
#else
#include <unistd.h>
#include <pwd.h>
#include <sys/stat.h>
#endif
//==================
//warning supression
//==================
//Visual C++
#if defined(_MSC_VER)
//disable libc "deprecation" warnings
#pragma warning(disable:4996)
#endif
//================
//POSIX compliance
//================
#if defined(_MSC_VER)
#define PATH_MAX _MAX_PATH
#define va_copy(dest, src) ((dest) = (src))
#endif
#if defined(_WIN32)
#define getcwd _getcwd
#define ftruncate _chsize
#define putenv _putenv
#define mkdir(n, m) _wmkdir(nall::utf16_t(n))
#define rmdir _rmdir
#define vsnprintf _vsnprintf
#define usleep(n) Sleep(n / 1000)
#endif
//================
//inline expansion
//================
#if defined(__GNUC__)
#define noinline __attribute__((noinline))
#define inline inline
#define alwaysinline inline __attribute__((always_inline))
#elif defined(_MSC_VER)
#define noinline __declspec(noinline)
#define inline inline
#define alwaysinline inline __forceinline
#else
#define noinline
#define inline inline
#define alwaysinline inline
#endif
#endif

View File

@@ -0,0 +1,109 @@
#ifndef NALL_PRIORITYQUEUE_HPP
#define NALL_PRIORITYQUEUE_HPP
#include <limits>
#include <nall/function.hpp>
#include <nall/serializer.hpp>
#include <nall/utility.hpp>
namespace nall {
template<typename type_t> void priority_queue_nocallback(type_t) {}
//priority queue implementation using binary min-heap array;
//does not require normalize() function.
//O(1) find (tick)
//O(log n) insert (enqueue)
//O(log n) remove (dequeue)
template<typename type_t> class priority_queue {
public:
inline void tick(unsigned ticks) {
basecounter += ticks;
while(heapsize && gte(basecounter, heap[0].counter)) callback(dequeue());
}
//counter is relative to current time (eg enqueue(64, ...) fires in 64 ticks);
//counter cannot exceed std::numeric_limits<unsigned>::max() >> 1.
void enqueue(unsigned counter, type_t event) {
unsigned child = heapsize++;
counter += basecounter;
while(child) {
unsigned parent = (child - 1) >> 1;
if(gte(counter, heap[parent].counter)) break;
heap[child].counter = heap[parent].counter;
heap[child].event = heap[parent].event;
child = parent;
}
heap[child].counter = counter;
heap[child].event = event;
}
type_t dequeue() {
type_t event(heap[0].event);
unsigned parent = 0;
unsigned counter = heap[--heapsize].counter;
while(true) {
unsigned child = (parent << 1) + 1;
if(child >= heapsize) break;
if(child + 1 < heapsize && gte(heap[child].counter, heap[child + 1].counter)) child++;
if(gte(heap[child].counter, counter)) break;
heap[parent].counter = heap[child].counter;
heap[parent].event = heap[child].event;
parent = child;
}
heap[parent].counter = counter;
heap[parent].event = heap[heapsize].event;
return event;
}
void reset() {
basecounter = 0;
heapsize = 0;
}
void serialize(serializer &s) {
s.integer(basecounter);
s.integer(heapsize);
for(unsigned n = 0; n < heapcapacity; n++) {
s.integer(heap[n].counter);
s.integer(heap[n].event);
}
}
priority_queue(unsigned size, function<void (type_t)> callback_ = &priority_queue_nocallback<type_t>)
: callback(callback_) {
heap = new heap_t[size];
heapcapacity = size;
reset();
}
~priority_queue() {
delete[] heap;
}
priority_queue& operator=(const priority_queue&) = delete;
priority_queue(const priority_queue&) = delete;
private:
function<void (type_t)> callback;
unsigned basecounter;
unsigned heapsize;
unsigned heapcapacity;
struct heap_t {
unsigned counter;
type_t event;
} *heap;
//return true if x is greater than or equal to y
inline bool gte(unsigned x, unsigned y) {
return x - y < (std::numeric_limits<unsigned>::max() >> 1);
}
};
}
#endif

View File

@@ -0,0 +1,91 @@
#ifndef NALL_PROPERTY_HPP
#define NALL_PROPERTY_HPP
//nall::property implements ownership semantics into container classes
//example: property<owner>::readonly<type> implies that only owner has full
//access to type; and all other code has readonly access.
//
//this code relies on extended friend semantics from C++0x to work, as it
//declares a friend class via a template paramter. it also exploits a bug in
//G++ 4.x to work even in C++98 mode.
//
//if compiling elsewhere, simply remove the friend class and private semantics
//property can be used either of two ways:
//struct foo {
// property<foo>::readonly<bool> x;
// property<foo>::readwrite<int> y;
//};
//-or-
//struct foo : property<foo> {
// readonly<bool> x;
// readwrite<int> y;
//};
//return types are const T& (byref) instead fo T (byval) to avoid major speed
//penalties for objects with expensive copy constructors
//operator-> provides access to underlying object type:
//readonly<Object> foo;
//foo->bar();
//... will call Object::bar();
//operator='s reference is constant so as to avoid leaking a reference handle
//that could bypass access restrictions
//both constant and non-constant operators are provided, though it may be
//necessary to cast first, for instance:
//struct foo : property<foo> { readonly<int> bar; } object;
//int main() { int value = const_cast<const foo&>(object); }
//writeonly is useful for objects that have non-const reads, but const writes.
//however, to avoid leaking handles, the interface is very restricted. the only
//way to write is via operator=, which requires conversion via eg copy
//constructor. example:
//struct foo {
// foo(bool value) { ... }
//};
//writeonly<foo> bar;
//bar = true;
namespace nall {
template<typename C> struct property {
template<typename T> struct traits { typedef T type; };
template<typename T> struct readonly {
const T* operator->() const { return &value; }
const T& operator()() const { return value; }
operator const T&() const { return value; }
private:
T* operator->() { return &value; }
operator T&() { return value; }
const T& operator=(const T& value_) { return value = value_; }
T value;
friend class traits<C>::type;
};
template<typename T> struct writeonly {
void operator=(const T& value_) { value = value_; }
private:
const T* operator->() const { return &value; }
const T& operator()() const { return value; }
operator const T&() const { return value; }
T* operator->() { return &value; }
operator T&() { return value; }
T value;
friend class traits<C>::type;
};
template<typename T> struct readwrite {
const T* operator->() const { return &value; }
const T& operator()() const { return value; }
operator const T&() const { return value; }
T* operator->() { return &value; }
operator T&() { return value; }
const T& operator=(const T& value_) { return value = value_; }
T value;
};
};
}
#endif

View File

@@ -0,0 +1,55 @@
# requires nall/Makefile
# imports:
# $(qtlibs) -- list of Qt components to link against
# exports the following symbols:
# $(moc) -- meta-object compiler
# $(rcc) -- resource compiler
# $(qtinc) -- includes for compiling
# $(qtlib) -- libraries for linking
ifeq ($(moc),)
moc := moc
endif
ifeq ($(rcc),)
rcc := rcc
endif
ifeq ($(platform),x)
qtinc := `pkg-config --cflags $(qtlibs)`
qtlib := `pkg-config --libs $(qtlibs)`
else ifeq ($(platform),osx)
qtinc := $(foreach lib,$(qtlibs),-I/Library/Frameworks/$(lib).framework/Versions/4/Headers)
qtlib := -L/Library/Frameworks
qtlib += $(foreach lib,$(qtlibs),-framework $(lib))
qtlib += -framework Carbon
qtlib += -framework Cocoa
qtlib += -framework OpenGL
qtlib += -framework AppKit
qtlib += -framework ApplicationServices
else ifeq ($(platform),win)
ifeq ($(qtpath),)
# find Qt install directory from PATH environment variable
qtpath := $(foreach path,$(subst ;, ,$(PATH)),$(if $(wildcard $(path)/$(moc).exe),$(path)))
qtpath := $(strip $(qtpath))
qtpath := $(subst \,/,$(qtpath))
qtpath := $(patsubst %/bin,%,$(qtpath))
endif
qtinc := -I$(qtpath)/include
qtinc += $(foreach lib,$(qtlibs),-I$(qtpath)/include/$(lib))
qtlib := -L$(qtpath)/lib
qtlib += -L$(qtpath)/plugins/imageformats
qtlib += $(foreach lib,$(qtlibs),-l$(lib)4)
qtlib += -lmingw32 -lqtmain -lcomdlg32 -loleaut32 -limm32 -lwinmm
qtlib += -lwinspool -lmsimg32 -lole32 -ladvapi32 -lws2_32 -luuid -lgdi32
qtlib += $(foreach lib,$(qtlibs),-l$(lib)4)
# optional image-file support:
# qtlib += -lqjpeg -lqmng
endif

View File

@@ -0,0 +1,41 @@
#ifndef NALL_QT_CHECKACTION_HPP
#define NALL_QT_CHECKACTION_HPP
namespace nall {
class CheckAction : public QAction {
Q_OBJECT
public:
bool isChecked() const;
void setChecked(bool);
void toggleChecked();
CheckAction(const QString&, QObject*);
protected slots:
protected:
bool checked;
};
inline bool CheckAction::isChecked() const {
return checked;
}
inline void CheckAction::setChecked(bool checked_) {
checked = checked_;
if(checked) setIcon(QIcon(":/16x16/item-check-on.png"));
else setIcon(QIcon(":/16x16/item-check-off.png"));
}
inline void CheckAction::toggleChecked() {
setChecked(!isChecked());
}
inline CheckAction::CheckAction(const QString &text, QObject *parent) : QAction(text, parent) {
setChecked(false);
}
}
#endif

View File

@@ -0,0 +1,10 @@
#ifndef NALL_QT_CONCEPT_HPP
#define NALL_QT_CONCEPT_HPP
#include <nall/concept.hpp>
namespace nall {
template<typename T> struct has_count<QList<T>> { enum { value = true }; };
}
#endif

View File

@@ -0,0 +1,392 @@
#ifndef NALL_QT_FILEDIALOG_HPP
#define NALL_QT_FILEDIALOG_HPP
#include <nall/platform.hpp>
#include <nall/string.hpp>
#include <nall/qt/window.moc.hpp>
namespace nall {
class FileDialog;
class NewFolderDialog : public Window {
Q_OBJECT
public:
void show();
NewFolderDialog(FileDialog*);
protected slots:
void createFolderAction();
protected:
FileDialog *parent;
QVBoxLayout *layout;
QLineEdit *folderNameEdit;
QHBoxLayout *controlLayout;
QPushButton *okButton;
QPushButton *cancelButton;
};
class FileView : public QListView {
Q_OBJECT
protected:
void keyPressEvent(QKeyEvent*);
signals:
void changed(const QModelIndex&);
void browseUp();
protected slots:
void currentChanged(const QModelIndex&, const QModelIndex&);
};
class FileDialog : public Window {
Q_OBJECT
public:
void showLoad();
void showSave();
void showFolder();
void setPath(string path);
void setNameFilters(const string &filters);
FileDialog();
signals:
void changed(const string&);
void activated(const string&);
void accepted(const string&);
void rejected();
protected slots:
void fileViewChange(const QModelIndex&);
void fileViewActivate(const QModelIndex&);
void pathBoxChanged();
void filterBoxChanged();
void createNewFolder();
void browseUp();
void acceptAction();
void rejectAction();
protected:
NewFolderDialog *newFolderDialog;
QVBoxLayout *layout;
QHBoxLayout *navigationLayout;
QComboBox *pathBox;
QPushButton *newFolderButton;
QPushButton *upFolderButton;
QHBoxLayout *browseLayout;
QFileSystemModel *fileSystemModel;
FileView *fileView;
QGroupBox *previewFrame;
QLineEdit *fileNameEdit;
QHBoxLayout *controlLayout;
QComboBox *filterBox;
QPushButton *optionsButton;
QPushButton *acceptButton;
QPushButton *rejectButton;
bool lock;
void createFolderAction(const string &name);
void closeEvent(QCloseEvent*);
friend class NewFolderDialog;
};
inline void NewFolderDialog::show() {
folderNameEdit->setText("");
Window::show();
folderNameEdit->setFocus();
}
inline void NewFolderDialog::createFolderAction() {
string name = folderNameEdit->text().toUtf8().constData();
if(name == "") {
folderNameEdit->setFocus();
} else {
parent->createFolderAction(name);
close();
}
}
inline NewFolderDialog::NewFolderDialog(FileDialog *fileDialog) : parent(fileDialog) {
setMinimumWidth(240);
setWindowTitle("Create New Folder");
layout = new QVBoxLayout;
layout->setAlignment(Qt::AlignTop);
layout->setMargin(5);
layout->setSpacing(5);
setLayout(layout);
folderNameEdit = new QLineEdit;
layout->addWidget(folderNameEdit);
controlLayout = new QHBoxLayout;
controlLayout->setAlignment(Qt::AlignRight);
layout->addLayout(controlLayout);
okButton = new QPushButton("Ok");
controlLayout->addWidget(okButton);
cancelButton = new QPushButton("Cancel");
controlLayout->addWidget(cancelButton);
connect(folderNameEdit, SIGNAL(returnPressed()), this, SLOT(createFolderAction()));
connect(okButton, SIGNAL(released()), this, SLOT(createFolderAction()));
connect(cancelButton, SIGNAL(released()), this, SLOT(close()));
}
inline void FileView::currentChanged(const QModelIndex &current, const QModelIndex &previous) {
QAbstractItemView::currentChanged(current, previous);
emit changed(current);
}
inline void FileView::keyPressEvent(QKeyEvent *event) {
//enhance consistency: force OS X to act like Windows and Linux; enter = activate item
if(event->key() == Qt::Key_Return || event->key() == Qt::Key_Enter) {
emit activated(currentIndex());
return;
}
//simulate popular file manager behavior; backspace = go up one directory
if(event->key() == Qt::Key_Backspace) {
emit browseUp();
return;
}
//fallback: unrecognized keypresses get handled by the widget itself
QListView::keyPressEvent(event);
}
inline void FileDialog::showLoad() {
acceptButton->setText("Load");
fileNameEdit->hide();
filterBox->show();
show();
}
inline void FileDialog::showSave() {
acceptButton->setText("Save");
fileNameEdit->show();
filterBox->show();
show();
}
inline void FileDialog::showFolder() {
acceptButton->setText("Choose");
fileNameEdit->hide();
filterBox->hide();
setNameFilters("Folders ()");
show();
}
inline void FileDialog::fileViewChange(const QModelIndex &index) {
string path = fileSystemModel->filePath(index).toUtf8().constData();
if(path == fileSystemModel->rootPath().toUtf8().constData()) path = "";
fileNameEdit->setText(notdir(path));
emit changed(path);
}
inline void FileDialog::fileViewActivate(const QModelIndex &index) {
string path = fileSystemModel->filePath(index).toUtf8().constData();
if(fileSystemModel->isDir(index)) {
emit activated(path);
setPath(path);
} else {
emit activated(path);
close();
}
}
inline void FileDialog::pathBoxChanged() {
if(lock) return;
setPath(pathBox->currentText().toUtf8().constData());
}
inline void FileDialog::filterBoxChanged() {
if(lock) return;
string filters = filterBox->currentText().toUtf8().constData();
if(filters.length() == 0) {
fileSystemModel->setNameFilters(QStringList() << "*");
} else {
filters = substr(filters, strpos(filters, "(")());
ltrim(filters, "(");
rtrim(filters, ")");
lstring part;
part.split(" ", filters);
QStringList list;
for(unsigned i = 0; i < part.size(); i++) list << part[i];
fileSystemModel->setNameFilters(list);
}
}
inline void FileDialog::createNewFolder() {
newFolderDialog->show();
}
inline void FileDialog::browseUp() {
if(pathBox->count() > 1) pathBox->setCurrentIndex(1);
}
inline void FileDialog::setPath(string path) {
lock = true;
newFolderDialog->close();
if(QDir(path).exists()) {
newFolderButton->setEnabled(true);
} else {
newFolderButton->setEnabled(false);
path = "";
}
fileSystemModel->setRootPath(path);
fileView->setRootIndex(fileSystemModel->index(path));
fileView->setCurrentIndex(fileView->rootIndex());
fileView->setFocus();
pathBox->clear();
if(path.length() > 0) {
QDir directory(path);
while(true) {
pathBox->addItem(directory.absolutePath());
if(directory.isRoot()) break;
directory.cdUp();
}
}
pathBox->addItem("<root>");
fileNameEdit->setText("");
lock = false;
}
inline void FileDialog::setNameFilters(const string &filters) {
lock = true;
lstring list;
list.split("\n", filters);
filterBox->clear();
for(unsigned i = 0; i < list.size(); i++) {
filterBox->addItem(list[i]);
}
lock = false;
filterBoxChanged();
}
inline void FileDialog::acceptAction() {
string path = fileSystemModel->rootPath().toUtf8().constData();
path << "/" << notdir(fileNameEdit->text().toUtf8().constData());
rtrim(path, "/");
if(QDir(path).exists()) {
emit accepted(path);
setPath(path);
} else {
emit accepted(path);
close();
}
}
inline void FileDialog::rejectAction() {
emit rejected();
close();
}
inline void FileDialog::createFolderAction(const string &name) {
string path = fileSystemModel->rootPath().toUtf8().constData();
path << "/" << notdir(name);
mkdir(path, 0755);
}
inline void FileDialog::closeEvent(QCloseEvent *event) {
newFolderDialog->close();
Window::closeEvent(event);
}
inline FileDialog::FileDialog() {
newFolderDialog = new NewFolderDialog(this);
resize(640, 360);
layout = new QVBoxLayout;
layout->setMargin(5);
layout->setSpacing(5);
setLayout(layout);
navigationLayout = new QHBoxLayout;
layout->addLayout(navigationLayout);
pathBox = new QComboBox;
pathBox->setEditable(true);
pathBox->setMinimumContentsLength(16);
pathBox->setSizeAdjustPolicy(QComboBox::AdjustToMinimumContentsLength);
pathBox->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Preferred);
navigationLayout->addWidget(pathBox);
newFolderButton = new QPushButton;
newFolderButton->setIconSize(QSize(16, 16));
newFolderButton->setIcon(QIcon(":/16x16/folder-new.png"));
navigationLayout->addWidget(newFolderButton);
upFolderButton = new QPushButton;
upFolderButton->setIconSize(QSize(16, 16));
upFolderButton->setIcon(QIcon(":/16x16/go-up.png"));
navigationLayout->addWidget(upFolderButton);
browseLayout = new QHBoxLayout;
layout->addLayout(browseLayout);
fileSystemModel = new QFileSystemModel;
fileSystemModel->setFilter(QDir::AllDirs | QDir::Files | QDir::NoDotAndDotDot);
fileSystemModel->setNameFilterDisables(false);
fileView = new FileView;
fileView->setMinimumWidth(320);
fileView->setModel(fileSystemModel);
fileView->setIconSize(QSize(16, 16));
browseLayout->addWidget(fileView);
previewFrame = new QGroupBox;
previewFrame->hide();
browseLayout->addWidget(previewFrame);
fileNameEdit = new QLineEdit;
layout->addWidget(fileNameEdit);
controlLayout = new QHBoxLayout;
controlLayout->setAlignment(Qt::AlignRight);
layout->addLayout(controlLayout);
filterBox = new QComboBox;
filterBox->setMinimumContentsLength(16);
filterBox->setSizeAdjustPolicy(QComboBox::AdjustToMinimumContentsLength);
filterBox->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Preferred);
controlLayout->addWidget(filterBox);
optionsButton = new QPushButton("Options");
optionsButton->hide();
controlLayout->addWidget(optionsButton);
acceptButton = new QPushButton("Ok");
controlLayout->addWidget(acceptButton);
rejectButton = new QPushButton("Cancel");
controlLayout->addWidget(rejectButton);
lock = false;
connect(pathBox, SIGNAL(currentIndexChanged(int)), this, SLOT(pathBoxChanged()));
connect(newFolderButton, SIGNAL(released()), this, SLOT(createNewFolder()));
connect(upFolderButton, SIGNAL(released()), this, SLOT(browseUp()));
connect(fileView, SIGNAL(changed(const QModelIndex&)), this, SLOT(fileViewChange(const QModelIndex&)));
connect(fileView, SIGNAL(activated(const QModelIndex&)), this, SLOT(fileViewActivate(const QModelIndex&)));
connect(fileView, SIGNAL(browseUp()), this, SLOT(browseUp()));
connect(fileNameEdit, SIGNAL(returnPressed()), this, SLOT(acceptAction()));
connect(filterBox, SIGNAL(currentIndexChanged(int)), this, SLOT(filterBoxChanged()));
connect(acceptButton, SIGNAL(released()), this, SLOT(acceptAction()));
connect(rejectButton, SIGNAL(released()), this, SLOT(rejectAction()));
}
}
#endif

View File

@@ -0,0 +1,173 @@
#ifndef NALL_QT_HEXEDITOR_HPP
#define NALL_QT_HEXEDITOR_HPP
#include <nall/function.hpp>
#include <nall/stdint.hpp>
#include <nall/string.hpp>
namespace nall {
class HexEditor : public QTextEdit {
Q_OBJECT
public:
function<uint8_t (unsigned)> reader;
function<void (unsigned, uint8_t)> writer;
void setColumns(unsigned columns);
void setRows(unsigned rows);
void setOffset(unsigned offset);
void setSize(unsigned size);
unsigned lineWidth() const;
void refresh();
HexEditor();
protected slots:
void scrolled();
protected:
QHBoxLayout *layout;
QScrollBar *scrollBar;
unsigned editorColumns;
unsigned editorRows;
unsigned editorOffset;
unsigned editorSize;
bool lock;
void keyPressEvent(QKeyEvent*);
};
inline void HexEditor::keyPressEvent(QKeyEvent *event) {
QTextCursor cursor = textCursor();
unsigned x = cursor.position() % lineWidth();
unsigned y = cursor.position() / lineWidth();
int hexCode = -1;
switch(event->key()) {
case Qt::Key_0: hexCode = 0; break;
case Qt::Key_1: hexCode = 1; break;
case Qt::Key_2: hexCode = 2; break;
case Qt::Key_3: hexCode = 3; break;
case Qt::Key_4: hexCode = 4; break;
case Qt::Key_5: hexCode = 5; break;
case Qt::Key_6: hexCode = 6; break;
case Qt::Key_7: hexCode = 7; break;
case Qt::Key_8: hexCode = 8; break;
case Qt::Key_9: hexCode = 9; break;
case Qt::Key_A: hexCode = 10; break;
case Qt::Key_B: hexCode = 11; break;
case Qt::Key_C: hexCode = 12; break;
case Qt::Key_D: hexCode = 13; break;
case Qt::Key_E: hexCode = 14; break;
case Qt::Key_F: hexCode = 15; break;
}
if(cursor.hasSelection() == false && hexCode != -1) {
bool cursorOffsetValid = (x >= 11 && ((x - 11) % 3) != 2);
if(cursorOffsetValid) {
bool nibble = (x - 11) % 3; //0 = top nibble, 1 = bottom nibble
unsigned cursorOffset = y * editorColumns + ((x - 11) / 3);
unsigned effectiveOffset = editorOffset + cursorOffset;
if(effectiveOffset >= editorSize) effectiveOffset %= editorSize;
uint8_t data = reader ? reader(effectiveOffset) : 0x00;
data &= (nibble == 0 ? 0x0f : 0xf0);
data |= (nibble == 0 ? (hexCode << 4) : (hexCode << 0));
if(writer) writer(effectiveOffset, data);
refresh();
cursor.setPosition(y * lineWidth() + x + 1); //advance cursor
setTextCursor(cursor);
}
} else {
//allow navigation keys to move cursor, but block text input
setTextInteractionFlags(Qt::TextSelectableByKeyboard | Qt::TextSelectableByMouse);
QTextEdit::keyPressEvent(event);
setTextInteractionFlags(Qt::TextEditorInteraction);
}
}
inline void HexEditor::setColumns(unsigned columns) {
editorColumns = columns;
}
inline void HexEditor::setRows(unsigned rows) {
editorRows = rows;
scrollBar->setPageStep(editorRows);
}
inline void HexEditor::setOffset(unsigned offset) {
lock = true;
editorOffset = offset;
scrollBar->setSliderPosition(editorOffset / editorColumns);
lock = false;
}
inline void HexEditor::setSize(unsigned size) {
editorSize = size;
bool indivisible = (editorSize % editorColumns) != 0; //add one for incomplete row
scrollBar->setRange(0, editorSize / editorColumns + indivisible - editorRows);
}
inline unsigned HexEditor::lineWidth() const {
return 11 + 3 * editorColumns;
}
inline void HexEditor::refresh() {
string output;
char temp[256];
unsigned offset = editorOffset;
for(unsigned y = 0; y < editorRows; y++) {
if(offset >= editorSize) break;
sprintf(temp, "%.4x:%.4x", (offset >> 16) & 0xffff, (offset >> 0) & 0xffff);
output << "<font color='#808080'>" << temp << "</font>&nbsp;&nbsp;";
for(unsigned x = 0; x < editorColumns; x++) {
if(offset >= editorSize) break;
sprintf(temp, "%.2x", reader ? reader(offset) : 0x00);
offset++;
output << "<font color='" << ((x & 1) ? "#000080" : "#0000ff") << "'>" << temp << "</font>";
if(x != (editorColumns - 1)) output << "&nbsp;";
}
if(y != (editorRows - 1)) output << "<br>";
}
setHtml(output);
}
inline void HexEditor::scrolled() {
if(lock) return;
unsigned offset = scrollBar->sliderPosition();
editorOffset = offset * editorColumns;
refresh();
}
inline HexEditor::HexEditor() {
setHorizontalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
setVerticalScrollBarPolicy(Qt::ScrollBarAlwaysOff);
layout = new QHBoxLayout;
layout->setAlignment(Qt::AlignRight);
layout->setMargin(0);
layout->setSpacing(0);
setLayout(layout);
scrollBar = new QScrollBar(Qt::Vertical);
scrollBar->setSingleStep(1);
layout->addWidget(scrollBar);
lock = false;
connect(scrollBar, SIGNAL(actionTriggered(int)), this, SLOT(scrolled()));
setColumns(16);
setRows(16);
setSize(0);
setOffset(0);
}
}
#endif

View File

@@ -0,0 +1,41 @@
#ifndef NALL_QT_RADIOACTION_HPP
#define NALL_QT_RADIOACTION_HPP
namespace nall {
class RadioAction : public QAction {
Q_OBJECT
public:
bool isChecked() const;
void setChecked(bool);
void toggleChecked();
RadioAction(const QString&, QObject*);
protected slots:
protected:
bool checked;
};
inline bool RadioAction::isChecked() const {
return checked;
}
inline void RadioAction::setChecked(bool checked_) {
checked = checked_;
if(checked) setIcon(QIcon(":/16x16/item-radio-on.png"));
else setIcon(QIcon(":/16x16/item-radio-off.png"));
}
inline void RadioAction::toggleChecked() {
setChecked(!isChecked());
}
inline RadioAction::RadioAction(const QString &text, QObject *parent) : QAction(text, parent) {
setChecked(false);
}
}
#endif

View File

@@ -0,0 +1,105 @@
#ifndef NALL_QT_WINDOW_HPP
#define NALL_QT_WINDOW_HPP
#include <nall/base64.hpp>
#include <nall/string.hpp>
namespace nall {
class Window : public QWidget {
Q_OBJECT
public:
void setGeometryString(string *geometryString);
void setCloseOnEscape(bool);
void show();
void hide();
void shrink();
Window();
protected slots:
protected:
string *geometryString;
bool closeOnEscape;
void keyReleaseEvent(QKeyEvent *event);
void closeEvent(QCloseEvent *event);
};
inline void Window::setGeometryString(string *geometryString_) {
geometryString = geometryString_;
if(geometryString && isVisible() == false) {
uint8_t *data;
unsigned length;
base64::decode(data, length, *geometryString);
QByteArray array((const char*)data, length);
delete[] data;
restoreGeometry(array);
}
}
inline void Window::setCloseOnEscape(bool value) {
closeOnEscape = value;
}
inline void Window::show() {
if(geometryString && isVisible() == false) {
uint8_t *data;
unsigned length;
base64::decode(data, length, *geometryString);
QByteArray array((const char*)data, length);
delete[] data;
restoreGeometry(array);
}
QWidget::show();
QApplication::processEvents();
activateWindow();
raise();
}
inline void Window::hide() {
if(geometryString && isVisible() == true) {
char *data;
QByteArray geometry = saveGeometry();
base64::encode(data, (const uint8_t*)geometry.data(), geometry.length());
*geometryString = data;
delete[] data;
}
QWidget::hide();
}
inline void Window::shrink() {
if(isFullScreen()) return;
for(unsigned i = 0; i < 2; i++) {
resize(0, 0);
usleep(2000);
QApplication::processEvents();
}
}
inline void Window::keyReleaseEvent(QKeyEvent *event) {
if(closeOnEscape && (event->key() == Qt::Key_Escape)) close();
QWidget::keyReleaseEvent(event);
}
inline void Window::closeEvent(QCloseEvent *event) {
if(geometryString) {
char *data;
QByteArray geometry = saveGeometry();
base64::encode(data, (const uint8_t*)geometry.data(), geometry.length());
*geometryString = data;
delete[] data;
}
QWidget::closeEvent(event);
}
inline Window::Window() {
geometryString = 0;
closeOnEscape = true;
}
}
#endif

View File

@@ -0,0 +1,20 @@
#ifndef NALL_RANDOM_HPP
#define NALL_RANDOM_HPP
namespace nall {
//pseudo-random number generator
inline unsigned prng() {
static unsigned n = 0;
return n = (n >> 1) ^ (((n & 1) - 1) & 0xedb88320);
}
struct random_cyclic {
unsigned seed;
inline unsigned operator()() {
return seed = (seed >> 1) ^ (((seed & 1) - 1) & 0xedb88320);
}
random_cyclic() : seed(0) {}
};
}
#endif

View File

@@ -0,0 +1,80 @@
#ifndef NALL_SERIAL_HPP
#define NALL_SERIAL_HPP
#include <sys/ioctl.h>
#include <fcntl.h>
#include <termios.h>
#include <unistd.h>
#include <nall/stdint.hpp>
namespace nall {
class serial {
public:
//-1 on error, otherwise return bytes read
int read(uint8_t *data, unsigned length) {
if(port_open == false) return -1;
return ::read(port, (void*)data, length);
}
//-1 on error, otherwise return bytes written
int write(const uint8_t *data, unsigned length) {
if(port_open == false) return -1;
return ::write(port, (void*)data, length);
}
bool open(const char *portname, unsigned rate) {
close();
port = ::open(portname, O_RDWR | O_NOCTTY | O_NDELAY | O_NONBLOCK);
if(port == -1) return false;
if(ioctl(port, TIOCEXCL) == -1) { close(); return false; }
if(fcntl(port, F_SETFL, 0) == -1) { close(); return false; }
if(tcgetattr(port, &original_attr) == -1) { close(); return false; }
termios attr = original_attr;
cfmakeraw(&attr);
cfsetspeed(&attr, rate);
attr.c_lflag &=~ (ECHO | ECHONL | ISIG | ICANON | IEXTEN);
attr.c_iflag &=~ (BRKINT | PARMRK | INPCK | ISTRIP | INLCR | IGNCR | ICRNL | IXON | IXOFF | IXANY);
attr.c_iflag |= (IGNBRK | IGNPAR);
attr.c_oflag &=~ (OPOST);
attr.c_cflag &=~ (CSIZE | CSTOPB | PARENB);
attr.c_cflag |= (CS8 | CREAD | CLOCAL);
attr.c_cc[VTIME] = attr.c_cc[VMIN] = 0;
if(tcsetattr(port, TCSANOW, &attr) == -1) { close(); return false; }
return port_open = true;
}
void close() {
if(port != -1) {
tcdrain(port);
if(port_open == true) {
tcsetattr(port, TCSANOW, &original_attr);
port_open = false;
}
::close(port);
port = -1;
}
}
serial() {
port = -1;
port_open = false;
}
~serial() {
close();
}
private:
int port;
bool port_open;
termios original_attr;
};
}
#endif

View File

@@ -0,0 +1,145 @@
#ifndef NALL_SERIALIZER_HPP
#define NALL_SERIALIZER_HPP
#include <type_traits>
#include <utility>
#include <nall/stdint.hpp>
#include <nall/utility.hpp>
namespace nall {
//serializer: a class designed to save and restore the state of classes.
//
//benefits:
//- data() will be portable in size (it is not necessary to specify type sizes.)
//- data() will be portable in endianness (always stored internally as little-endian.)
//- one serialize function can both save and restore class states.
//
//caveats:
//- only plain-old-data can be stored. complex classes must provide serialize(serializer&);
//- floating-point usage is not portable across platforms
class serializer {
public:
enum mode_t { Load, Save, Size };
mode_t mode() const {
return imode;
}
const uint8_t* data() const {
return idata;
}
unsigned size() const {
return isize;
}
unsigned capacity() const {
return icapacity;
}
template<typename T> void floatingpoint(T &value) {
enum { size = sizeof(T) };
//this is rather dangerous, and not cross-platform safe;
//but there is no standardized way to export FP-values
uint8_t *p = (uint8_t*)&value;
if(imode == Save) {
for(unsigned n = 0; n < size; n++) idata[isize++] = p[n];
} else if(imode == Load) {
for(unsigned n = 0; n < size; n++) p[n] = idata[isize++];
} else {
isize += size;
}
}
template<typename T> void integer(T &value) {
enum { size = std::is_same<bool, T>::value ? 1 : sizeof(T) };
if(imode == Save) {
for(unsigned n = 0; n < size; n++) idata[isize++] = value >> (n << 3);
} else if(imode == Load) {
value = 0;
for(unsigned n = 0; n < size; n++) value |= idata[isize++] << (n << 3);
} else if(imode == Size) {
isize += size;
}
}
template<typename T> void array(T &array) {
enum { size = sizeof(T) / sizeof(typename std::remove_extent<T>::type) };
for(unsigned n = 0; n < size; n++) integer(array[n]);
}
template<typename T> void array(T array, unsigned size) {
for(unsigned n = 0; n < size; n++) integer(array[n]);
}
//copy
serializer& operator=(const serializer &s) {
if(idata) delete[] idata;
imode = s.imode;
idata = new uint8_t[s.icapacity];
isize = s.isize;
icapacity = s.icapacity;
memcpy(idata, s.idata, s.icapacity);
return *this;
}
serializer(const serializer &s) : idata(0) {
operator=(s);
}
//move
serializer& operator=(serializer &&s) {
if(idata) delete[] idata;
imode = s.imode;
idata = s.idata;
isize = s.isize;
icapacity = s.icapacity;
s.idata = 0;
return *this;
}
serializer(serializer &&s) {
operator=(std::move(s));
}
//construction
serializer() {
imode = Size;
idata = 0;
isize = 0;
}
serializer(unsigned capacity) {
imode = Save;
idata = new uint8_t[capacity]();
isize = 0;
icapacity = capacity;
}
serializer(const uint8_t *data, unsigned capacity) {
imode = Load;
idata = new uint8_t[capacity];
isize = 0;
icapacity = capacity;
memcpy(idata, data, capacity);
}
~serializer() {
if(idata) delete[] idata;
}
private:
mode_t imode;
uint8_t *idata;
unsigned isize;
unsigned icapacity;
};
};
#endif

143
snesfilter/nall/sha256.hpp Normal file
View File

@@ -0,0 +1,143 @@
#ifndef NALL_SHA256_HPP
#define NALL_SHA256_HPP
//author: vladitx
namespace nall {
#define PTR(t, a) ((t*)(a))
#define SWAP32(x) ((uint32_t)( \
(((uint32_t)(x) & 0x000000ff) << 24) | \
(((uint32_t)(x) & 0x0000ff00) << 8) | \
(((uint32_t)(x) & 0x00ff0000) >> 8) | \
(((uint32_t)(x) & 0xff000000) >> 24) \
))
#define ST32(a, d) *PTR(uint32_t, a) = (d)
#define ST32BE(a, d) ST32(a, SWAP32(d))
#define LD32(a) *PTR(uint32_t, a)
#define LD32BE(a) SWAP32(LD32(a))
#define LSL32(x, n) ((uint32_t)(x) << (n))
#define LSR32(x, n) ((uint32_t)(x) >> (n))
#define ROR32(x, n) (LSR32(x, n) | LSL32(x, 32 - (n)))
//first 32 bits of the fractional parts of the square roots of the first 8 primes 2..19
static const uint32_t T_H[8] = {
0x6a09e667, 0xbb67ae85, 0x3c6ef372, 0xa54ff53a, 0x510e527f, 0x9b05688c, 0x1f83d9ab, 0x5be0cd19,
};
//first 32 bits of the fractional parts of the cube roots of the first 64 primes 2..311
static const uint32_t T_K[64] = {
0x428a2f98, 0x71374491, 0xb5c0fbcf, 0xe9b5dba5, 0x3956c25b, 0x59f111f1, 0x923f82a4, 0xab1c5ed5,
0xd807aa98, 0x12835b01, 0x243185be, 0x550c7dc3, 0x72be5d74, 0x80deb1fe, 0x9bdc06a7, 0xc19bf174,
0xe49b69c1, 0xefbe4786, 0x0fc19dc6, 0x240ca1cc, 0x2de92c6f, 0x4a7484aa, 0x5cb0a9dc, 0x76f988da,
0x983e5152, 0xa831c66d, 0xb00327c8, 0xbf597fc7, 0xc6e00bf3, 0xd5a79147, 0x06ca6351, 0x14292967,
0x27b70a85, 0x2e1b2138, 0x4d2c6dfc, 0x53380d13, 0x650a7354, 0x766a0abb, 0x81c2c92e, 0x92722c85,
0xa2bfe8a1, 0xa81a664b, 0xc24b8b70, 0xc76c51a3, 0xd192e819, 0xd6990624, 0xf40e3585, 0x106aa070,
0x19a4c116, 0x1e376c08, 0x2748774c, 0x34b0bcb5, 0x391c0cb3, 0x4ed8aa4a, 0x5b9cca4f, 0x682e6ff3,
0x748f82ee, 0x78a5636f, 0x84c87814, 0x8cc70208, 0x90befffa, 0xa4506ceb, 0xbef9a3f7, 0xc67178f2,
};
struct sha256_ctx {
uint8_t in[64];
unsigned inlen;
uint32_t w[64];
uint32_t h[8];
uint64_t len;
};
void sha256_init(sha256_ctx *p) {
memset(p, 0, sizeof(sha256_ctx));
memcpy(p->h, T_H, sizeof(T_H));
}
static void sha256_block(sha256_ctx *p) {
unsigned i;
uint32_t s0, s1;
uint32_t a, b, c, d, e, f, g, h;
uint32_t t1, t2, maj, ch;
for(i = 0; i < 16; i++) p->w[i] = LD32BE(p->in + i * 4);
for(i = 16; i < 64; i++) {
s0 = ROR32(p->w[i - 15], 7) ^ ROR32(p->w[i - 15], 18) ^ LSR32(p->w[i - 15], 3);
s1 = ROR32(p->w[i - 2], 17) ^ ROR32(p->w[i - 2], 19) ^ LSR32(p->w[i - 2], 10);
p->w[i] = p->w[i - 16] + s0 + p->w[i - 7] + s1;
}
a = p->h[0]; b = p->h[1]; c = p->h[2]; d = p->h[3];
e = p->h[4]; f = p->h[5]; g = p->h[6]; h = p->h[7];
for(i = 0; i < 64; i++) {
s0 = ROR32(a, 2) ^ ROR32(a, 13) ^ ROR32(a, 22);
maj = (a & b) ^ (a & c) ^ (b & c);
t2 = s0 + maj;
s1 = ROR32(e, 6) ^ ROR32(e, 11) ^ ROR32(e, 25);
ch = (e & f) ^ (~e & g);
t1 = h + s1 + ch + T_K[i] + p->w[i];
h = g; g = f; f = e; e = d + t1;
d = c; c = b; b = a; a = t1 + t2;
}
p->h[0] += a; p->h[1] += b; p->h[2] += c; p->h[3] += d;
p->h[4] += e; p->h[5] += f; p->h[6] += g; p->h[7] += h;
//next block
p->inlen = 0;
}
void sha256_chunk(sha256_ctx *p, const uint8_t *s, unsigned len) {
unsigned l;
p->len += len;
while(len) {
l = 64 - p->inlen;
l = (len < l) ? len : l;
memcpy(p->in + p->inlen, s, l);
s += l;
p->inlen += l;
len -= l;
if(p->inlen == 64) sha256_block(p);
}
}
void sha256_final(sha256_ctx *p) {
uint64_t len;
p->in[p->inlen++] = 0x80;
if(p->inlen > 56) {
memset(p->in + p->inlen, 0, 64 - p->inlen);
sha256_block(p);
}
memset(p->in + p->inlen, 0, 56 - p->inlen);
len = p->len << 3;
ST32BE(p->in + 56, len >> 32);
ST32BE(p->in + 60, len);
sha256_block(p);
}
void sha256_hash(sha256_ctx *p, uint8_t *s) {
uint32_t *t = (uint32_t*)s;
for(unsigned i = 0; i < 8; i++) ST32BE(t++, p->h[i]);
}
#undef PTR
#undef SWAP32
#undef ST32
#undef ST32BE
#undef LD32
#undef LD32BE
#undef LSL32
#undef LSR32
#undef ROR32
}
#endif

View File

@@ -0,0 +1,864 @@
#ifndef NALL_SNES_INFO_HPP
#define NALL_SNES_INFO_HPP
namespace nall {
class snes_information {
public:
string xml_memory_map;
inline snes_information(const uint8_t *data, unsigned size);
private:
inline void read_header(const uint8_t *data, unsigned size);
inline unsigned find_header(const uint8_t *data, unsigned size);
inline unsigned score_header(const uint8_t *data, unsigned size, unsigned addr);
inline unsigned gameboy_ram_size(const uint8_t *data, unsigned size);
inline bool gameboy_has_rtc(const uint8_t *data, unsigned size);
enum HeaderField {
CartName = 0x00,
Mapper = 0x15,
RomType = 0x16,
RomSize = 0x17,
RamSize = 0x18,
CartRegion = 0x19,
Company = 0x1a,
Version = 0x1b,
Complement = 0x1c, //inverse checksum
Checksum = 0x1e,
ResetVector = 0x3c,
};
enum Mode {
ModeNormal,
ModeBsxSlotted,
ModeBsx,
ModeSufamiTurbo,
ModeSuperGameBoy,
};
enum Type {
TypeNormal,
TypeBsxSlotted,
TypeBsxBios,
TypeBsx,
TypeSufamiTurboBios,
TypeSufamiTurbo,
TypeSuperGameBoy1Bios,
TypeSuperGameBoy2Bios,
TypeGameBoy,
TypeUnknown,
};
enum Region {
NTSC,
PAL,
};
enum MemoryMapper {
LoROM,
HiROM,
ExLoROM,
ExHiROM,
SuperFXROM,
SA1ROM,
SPC7110ROM,
BSCLoROM,
BSCHiROM,
BSXROM,
STROM,
};
enum DSP1MemoryMapper {
DSP1Unmapped,
DSP1LoROM1MB,
DSP1LoROM2MB,
DSP1HiROM,
};
bool loaded; //is a base cartridge inserted?
unsigned crc32; //crc32 of all cartridges (base+slot(s))
unsigned rom_size;
unsigned ram_size;
Mode mode;
Type type;
Region region;
MemoryMapper mapper;
DSP1MemoryMapper dsp1_mapper;
bool has_bsx_slot;
bool has_superfx;
bool has_sa1;
bool has_srtc;
bool has_sdd1;
bool has_spc7110;
bool has_spc7110rtc;
bool has_cx4;
bool has_dsp1;
bool has_dsp2;
bool has_dsp3;
bool has_dsp4;
bool has_obc1;
bool has_st010;
bool has_st011;
bool has_st018;
};
snes_information::snes_information(const uint8_t *data, unsigned size) {
read_header(data, size);
string xml = "<?xml version='1.0' encoding='UTF-8'?>\n";
if(type == TypeBsx) {
xml << "<cartridge/>";
xml_memory_map = xml;
return;
}
if(type == TypeSufamiTurbo) {
xml << "<cartridge/>";
xml_memory_map = xml;
return;
}
if(type == TypeGameBoy) {
xml << "<cartridge rtc='" << gameboy_has_rtc(data, size) << "'>\n";
if(gameboy_ram_size(data, size) > 0) {
xml << " <ram size='" << strhex(gameboy_ram_size(data, size)) << "'/>\n";
}
xml << "</cartridge>\n";
xml_memory_map = xml;
return;
}
xml << "<cartridge";
if(region == NTSC) {
xml << " region='NTSC'";
} else {
xml << " region='PAL'";
}
xml << ">\n";
if(type == TypeSuperGameBoy1Bios) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-7f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-ff:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <supergameboy revision='1'>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
xml << " </mmio>\n";
xml << " </supergameboy>\n";
} else if(type == TypeSuperGameBoy2Bios) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-7f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-ff:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <supergameboy revision='2'>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
xml << " </mmio>\n";
xml << " </supergameboy>\n";
} else if(has_spc7110) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-0f:8000-ffff'/>\n";
xml << " <map mode='shadow' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-cf:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <spc7110>\n";
xml << " <mcu>\n";
xml << " <map address='d0-ff:0000-ffff' offset='100000' size='" << strhex(size - 0x100000) << "'/>\n";
xml << " </mcu>\n";
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='00:6000-7fff'/>\n";
xml << " <map mode='linear' address='30:6000-7fff'/>\n";
xml << " </ram>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:4800-483f'/>\n";
xml << " <map address='80-bf:4800-483f'/>\n";
xml << " </mmio>\n";
if(has_spc7110rtc) {
xml << " <rtc>\n";
xml << " <map address='00-3f:4840-4842'/>\n";
xml << " <map address='80-bf:4840-4842'/>\n";
xml << " </rtc>\n";
}
xml << " <dcu>\n";
xml << " <map address='50:0000-ffff'/>\n";
xml << " </dcu>\n";
xml << " </spc7110>\n";
} else if(mapper == LoROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-7f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-ff:8000-ffff'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
if((rom_size > 0x200000) || (ram_size > 32 * 1024)) {
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
xml << " <map mode='linear' address='f0-ff:0000-7fff'/>\n";
} else {
xml << " <map mode='linear' address='70-7f:0000-ffff'/>\n";
xml << " <map mode='linear' address='f0-ff:0000-ffff'/>\n";
}
xml << " </ram>\n";
}
} else if(mapper == HiROM) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-7f:0000-ffff'/>\n";
xml << " <map mode='shadow' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-ff:0000-ffff'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
if((rom_size > 0x200000) || (ram_size > 32 * 1024)) {
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
} else {
xml << " <map mode='linear' address='70-7f:0000-ffff'/>\n";
}
xml << " </ram>\n";
}
} else if(mapper == ExLoROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-7f:0000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:8000-ffff'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
xml << " </ram>\n";
}
} else if(mapper == ExHiROM) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-3f:8000-ffff' offset='400000'/>\n";
xml << " <map mode='linear' address='40-7f:0000-ffff' offset='400000'/>\n";
xml << " <map mode='shadow' address='80-bf:8000-ffff' offset='000000'/>\n";
xml << " <map mode='linear' address='c0-ff:0000-ffff' offset='000000'/>\n";
xml << " </rom>\n";
if(ram_size > 0) {
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
if((rom_size > 0x200000) || (ram_size > 32 * 1024)) {
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
} else {
xml << " <map mode='linear' address='70-7f:0000-ffff'/>\n";
}
xml << " </ram>\n";
}
} else if(mapper == SuperFXROM) {
xml << " <superfx revision='2'>\n";
xml << " <rom>\n";
xml << " <map mode='linear' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-5f:0000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-df:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='00-3f:6000-7fff' size='2000'/>\n";
xml << " <map mode='linear' address='60-7f:0000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:6000-7fff' size='2000'/>\n";
xml << " <map mode='linear' address='e0-ff:0000-ffff'/>\n";
xml << " </ram>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:3000-32ff'/>\n";
xml << " <map address='80-bf:3000-32ff'/>\n";
xml << " </mmio>\n";
xml << " </superfx>\n";
} else if(mapper == SA1ROM) {
xml << " <sa1>\n";
xml << " <rom>\n";
xml << " <map mode='linear' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-ff:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <iram size='800'>\n";
xml << " <map mode='linear' address='00-3f:3000-37ff'/>\n";
xml << " <map mode='linear' address='80-bf:3000-37ff'/>\n";
xml << " </iram>\n";
xml << " <bwram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='00-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='40-4f:0000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:6000-7fff'/>\n";
xml << " </bwram>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:2200-23ff'/>\n";
xml << " <map address='80-bf:2200-23ff'/>\n";
xml << " </mmio>\n";
xml << " </sa1>\n";
} else if(mapper == BSCLoROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-1f:8000-ffff' offset='000000'/>\n";
xml << " <map mode='linear' address='20-3f:8000-ffff' offset='100000'/>\n";
xml << " <map mode='linear' address='80-9f:8000-ffff' offset='200000'/>\n";
xml << " <map mode='linear' address='a0-bf:8000-ffff' offset='100000'/>\n";
xml << " </rom>\n";
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='70-7f:0000-7fff'/>\n";
xml << " <map mode='linear' address='f0-ff:0000-7fff'/>\n";
xml << " </ram>\n";
xml << " <bsx>\n";
xml << " <slot>\n";
xml << " <map mode='linear' address='c0-ef:0000-ffff'/>\n";
xml << " </slot>\n";
xml << " </bsx>\n";
} else if(mapper == BSCHiROM) {
xml << " <rom>\n";
xml << " <map mode='shadow' address='00-1f:8000-ffff'/>\n";
xml << " <map mode='linear' address='40-5f:0000-ffff'/>\n";
xml << " <map mode='shadow' address='80-9f:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-df:0000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram size='" << strhex(ram_size) << "'>\n";
xml << " <map mode='linear' address='20-3f:6000-7fff'/>\n";
xml << " <map mode='linear' address='a0-bf:6000-7fff'/>\n";
xml << " </ram>\n";
xml << " <bsx>\n";
xml << " <slot>\n";
xml << " <map mode='shadow' address='20-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='60-7f:0000-ffff'/>\n";
xml << " <map mode='shadow' address='a0-bf:8000-ffff'/>\n";
xml << " <map mode='linear' address='e0-ff:0000-ffff'/>\n";
xml << " </slot>\n";
xml << " </bsx>\n";
} else if(mapper == BSXROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-bf:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <bsx>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:5000-5fff'/>\n";
xml << " <map address='80-bf:5000-5fff'/>\n";
xml << " </mmio>\n";
xml << " </bsx>\n";
} else if(mapper == STROM) {
xml << " <rom>\n";
xml << " <map mode='linear' address='00-1f:8000-ffff'/>\n";
xml << " <map mode='linear' address='80-9f:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <sufamiturbo>\n";
xml << " <slot id='A'>\n";
xml << " <rom>\n";
xml << " <map mode='linear' address='20-3f:8000-ffff'/>\n";
xml << " <map mode='linear' address='a0-bf:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram>\n";
xml << " <map mode='linear' address='60-63:8000-ffff'/>\n";
xml << " <map mode='linear' address='e0-e3:8000-ffff'/>\n";
xml << " </ram>\n";
xml << " </slot>\n";
xml << " <slot id='B'>\n";
xml << " <rom>\n";
xml << " <map mode='linear' address='40-5f:8000-ffff'/>\n";
xml << " <map mode='linear' address='c0-df:8000-ffff'/>\n";
xml << " </rom>\n";
xml << " <ram>\n";
xml << " <map mode='linear' address='70-73:8000-ffff'/>\n";
xml << " <map mode='linear' address='f0-f3:8000-ffff'/>\n";
xml << " </ram>\n";
xml << " </slot>\n";
xml << " </sufamiturbo>\n";
}
if(has_srtc) {
xml << " <srtc>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:2800-2801'/>\n";
xml << " <map address='80-bf:2800-2801'/>\n";
xml << " </mmio>\n";
xml << " </srtc>\n";
}
if(has_sdd1) {
xml << " <sdd1>\n";
xml << " <mcu>\n";
xml << " <map address='c0-ff:0000-ffff'/>\n";
xml << " </mcu>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:4800-4807'/>\n";
xml << " <map address='80-bf:4800-4807'/>\n";
xml << " </mmio>\n";
xml << " </sdd1>\n";
}
if(has_cx4) {
xml << " <cx4>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
xml << " </mmio>\n";
xml << " </cx4>\n";
}
if(has_dsp1) {
xml << " <necdsp program='DSP-1B'>\n";
if(dsp1_mapper == DSP1LoROM1MB) {
xml << " <dr>\n";
xml << " <map address='20-3f:8000-bfff'/>\n";
xml << " <map address='a0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='20-3f:c000-ffff'/>\n";
xml << " <map address='a0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
} else if(dsp1_mapper == DSP1LoROM2MB) {
xml << " <dr>\n";
xml << " <map address='60-6f:0000-3fff'/>\n";
xml << " <map address='e0-ef:0000-3fff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='60-6f:4000-7fff'/>\n";
xml << " <map address='e0-ef:4000-7fff'/>\n";
xml << " </sr>\n";
} else if(dsp1_mapper == DSP1HiROM) {
xml << " <dr>\n";
xml << " <map address='00-1f:6000-6fff'/>\n";
xml << " <map address='80-9f:6000-6fff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='00-1f:7000-7fff'/>\n";
xml << " <map address='80-9f:7000-7fff'/>\n";
xml << " </sr>\n";
}
xml << " </necdsp>\n";
}
if(has_dsp2) {
xml << " <necdsp program='DSP-2'>\n";
xml << " <dr>\n";
xml << " <map address='20-3f:8000-bfff'/>\n";
xml << " <map address='a0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='20-3f:c000-ffff'/>\n";
xml << " <map address='a0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
xml << " </necdsp>\n";
}
if(has_dsp3) {
xml << " <necdsp program='DSP-3'>\n";
xml << " <dr>\n";
xml << " <map address='20-3f:8000-bfff'/>\n";
xml << " <map address='a0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='20-3f:c000-ffff'/>\n";
xml << " <map address='a0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
xml << " </necdsp>\n";
}
if(has_dsp4) {
xml << " <necdsp program='DSP-4'>\n";
xml << " <dr>\n";
xml << " <map address='30-3f:8000-bfff'/>\n";
xml << " <map address='b0-bf:8000-bfff'/>\n";
xml << " </dr>\n";
xml << " <sr>\n";
xml << " <map address='30-3f:c000-ffff'/>\n";
xml << " <map address='b0-bf:c000-ffff'/>\n";
xml << " </sr>\n";
xml << " </necdsp>\n";
}
if(has_obc1) {
xml << " <obc1>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:6000-7fff'/>\n";
xml << " <map address='80-bf:6000-7fff'/>\n";
xml << " </mmio>\n";
xml << " </obc1>\n";
}
if(has_st010) {
xml << " <setadsp program='ST-0010'>\n";
xml << " <mmio>\n";
xml << " <map address='68-6f:0000-0fff'/>\n";
xml << " <map address='e8-ef:0000-0fff'/>\n";
xml << " </mmio>\n";
xml << " </setadsp>\n";
}
if(has_st011) {
//ST-0011 addresses not verified; chip is unsupported
xml << " <setadsp program='ST-0011'>\n";
xml << " <mmio>\n";
xml << " <map address='68-6f:0000-0fff'/>\n";
xml << " <map address='e8-ef:0000-0fff'/>\n";
xml << " </mmio>\n";
xml << " </setadsp>\n";
}
if(has_st018) {
xml << " <setarisc program='ST-0018'>\n";
xml << " <mmio>\n";
xml << " <map address='00-3f:3800-38ff'/>\n";
xml << " <map address='80-bf:3800-38ff'/>\n";
xml << " </mmio>\n";
xml << " </setarisc>\n";
}
xml << "</cartridge>\n";
xml_memory_map = xml;
}
void snes_information::read_header(const uint8_t *data, unsigned size) {
type = TypeUnknown;
mapper = LoROM;
dsp1_mapper = DSP1Unmapped;
region = NTSC;
rom_size = size;
ram_size = 0;
has_bsx_slot = false;
has_superfx = false;
has_sa1 = false;
has_srtc = false;
has_sdd1 = false;
has_spc7110 = false;
has_spc7110rtc = false;
has_cx4 = false;
has_dsp1 = false;
has_dsp2 = false;
has_dsp3 = false;
has_dsp4 = false;
has_obc1 = false;
has_st010 = false;
has_st011 = false;
has_st018 = false;
//=====================
//detect Game Boy carts
//=====================
if(size >= 0x0140) {
if(data[0x0104] == 0xce && data[0x0105] == 0xed && data[0x0106] == 0x66 && data[0x0107] == 0x66
&& data[0x0108] == 0xcc && data[0x0109] == 0x0d && data[0x010a] == 0x00 && data[0x010b] == 0x0b) {
type = TypeGameBoy;
return;
}
}
const unsigned index = find_header(data, size);
const uint8_t mapperid = data[index + Mapper];
const uint8_t rom_type = data[index + RomType];
const uint8_t rom_size = data[index + RomSize];
const uint8_t company = data[index + Company];
const uint8_t regionid = data[index + CartRegion] & 0x7f;
ram_size = 1024 << (data[index + RamSize] & 7);
if(ram_size == 1024) ram_size = 0; //no RAM present
//0, 1, 13 = NTSC; 2 - 12 = PAL
region = (regionid <= 1 || regionid >= 13) ? NTSC : PAL;
//=======================
//detect BS-X flash carts
//=======================
if(data[index + 0x13] == 0x00 || data[index + 0x13] == 0xff) {
if(data[index + 0x14] == 0x00) {
const uint8_t n15 = data[index + 0x15];
if(n15 == 0x00 || n15 == 0x80 || n15 == 0x84 || n15 == 0x9c || n15 == 0xbc || n15 == 0xfc) {
if(data[index + 0x1a] == 0x33 || data[index + 0x1a] == 0xff) {
type = TypeBsx;
mapper = BSXROM;
region = NTSC; //BS-X only released in Japan
return;
}
}
}
}
//=========================
//detect Sufami Turbo carts
//=========================
if(!memcmp(data, "BANDAI SFC-ADX", 14)) {
if(!memcmp(data + 16, "SFC-ADX BACKUP", 14)) {
type = TypeSufamiTurboBios;
} else {
type = TypeSufamiTurbo;
}
mapper = STROM;
region = NTSC; //Sufami Turbo only released in Japan
return; //RAM size handled outside this routine
}
//==========================
//detect Super Game Boy BIOS
//==========================
if(!memcmp(data + index, "Super GAMEBOY2", 14)) {
type = TypeSuperGameBoy2Bios;
return;
}
if(!memcmp(data + index, "Super GAMEBOY", 13)) {
type = TypeSuperGameBoy1Bios;
return;
}
//=====================
//detect standard carts
//=====================
//detect presence of BS-X flash cartridge connector (reads extended header information)
if(data[index - 14] == 'Z') {
if(data[index - 11] == 'J') {
uint8_t n13 = data[index - 13];
if((n13 >= 'A' && n13 <= 'Z') || (n13 >= '0' && n13 <= '9')) {
if(company == 0x33 || (data[index - 10] == 0x00 && data[index - 4] == 0x00)) {
has_bsx_slot = true;
}
}
}
}
if(has_bsx_slot) {
if(!memcmp(data + index, "Satellaview BS-X ", 21)) {
//BS-X base cart
type = TypeBsxBios;
mapper = BSXROM;
region = NTSC; //BS-X only released in Japan
return; //RAM size handled internally by load_cart_bsx() -> BSXCart class
} else {
type = TypeBsxSlotted;
mapper = (index == 0x7fc0 ? BSCLoROM : BSCHiROM);
region = NTSC; //BS-X slotted cartridges only released in Japan
}
} else {
//standard cart
type = TypeNormal;
if(index == 0x7fc0 && size >= 0x401000) {
mapper = ExLoROM;
} else if(index == 0x7fc0 && mapperid == 0x32) {
mapper = ExLoROM;
} else if(index == 0x7fc0) {
mapper = LoROM;
} else if(index == 0xffc0) {
mapper = HiROM;
} else { //index == 0x40ffc0
mapper = ExHiROM;
}
}
if(mapperid == 0x20 && (rom_type == 0x13 || rom_type == 0x14 || rom_type == 0x15 || rom_type == 0x1a)) {
has_superfx = true;
mapper = SuperFXROM;
ram_size = 1024 << (data[index - 3] & 7);
if(ram_size == 1024) ram_size = 0;
}
if(mapperid == 0x23 && (rom_type == 0x32 || rom_type == 0x34 || rom_type == 0x35)) {
has_sa1 = true;
mapper = SA1ROM;
}
if(mapperid == 0x35 && rom_type == 0x55) {
has_srtc = true;
}
if(mapperid == 0x32 && (rom_type == 0x43 || rom_type == 0x45)) {
has_sdd1 = true;
}
if(mapperid == 0x3a && (rom_type == 0xf5 || rom_type == 0xf9)) {
has_spc7110 = true;
has_spc7110rtc = (rom_type == 0xf9);
mapper = SPC7110ROM;
}
if(mapperid == 0x20 && rom_type == 0xf3) {
has_cx4 = true;
}
if((mapperid == 0x20 || mapperid == 0x21) && rom_type == 0x03) {
has_dsp1 = true;
}
if(mapperid == 0x30 && rom_type == 0x05 && company != 0xb2) {
has_dsp1 = true;
}
if(mapperid == 0x31 && (rom_type == 0x03 || rom_type == 0x05)) {
has_dsp1 = true;
}
if(has_dsp1 == true) {
if((mapperid & 0x2f) == 0x20 && size <= 0x100000) {
dsp1_mapper = DSP1LoROM1MB;
} else if((mapperid & 0x2f) == 0x20) {
dsp1_mapper = DSP1LoROM2MB;
} else if((mapperid & 0x2f) == 0x21) {
dsp1_mapper = DSP1HiROM;
}
}
if(mapperid == 0x20 && rom_type == 0x05) {
has_dsp2 = true;
}
if(mapperid == 0x30 && rom_type == 0x05 && company == 0xb2) {
has_dsp3 = true;
}
if(mapperid == 0x30 && rom_type == 0x03) {
has_dsp4 = true;
}
if(mapperid == 0x30 && rom_type == 0x25) {
has_obc1 = true;
}
if(mapperid == 0x30 && rom_type == 0xf6 && rom_size >= 10) {
has_st010 = true;
}
if(mapperid == 0x30 && rom_type == 0xf6 && rom_size < 10) {
has_st011 = true;
}
if(mapperid == 0x30 && rom_type == 0xf5) {
has_st018 = true;
}
}
unsigned snes_information::find_header(const uint8_t *data, unsigned size) {
unsigned score_lo = score_header(data, size, 0x007fc0);
unsigned score_hi = score_header(data, size, 0x00ffc0);
unsigned score_ex = score_header(data, size, 0x40ffc0);
if(score_ex) score_ex += 4; //favor ExHiROM on images > 32mbits
if(score_lo >= score_hi && score_lo >= score_ex) {
return 0x007fc0;
} else if(score_hi >= score_ex) {
return 0x00ffc0;
} else {
return 0x40ffc0;
}
}
unsigned snes_information::score_header(const uint8_t *data, unsigned size, unsigned addr) {
if(size < addr + 64) return 0; //image too small to contain header at this location?
int score = 0;
uint16_t resetvector = data[addr + ResetVector] | (data[addr + ResetVector + 1] << 8);
uint16_t checksum = data[addr + Checksum ] | (data[addr + Checksum + 1] << 8);
uint16_t complement = data[addr + Complement ] | (data[addr + Complement + 1] << 8);
uint8_t resetop = data[(addr & ~0x7fff) | (resetvector & 0x7fff)]; //first opcode executed upon reset
uint8_t mapper = data[addr + Mapper] & ~0x10; //mask off irrelevent FastROM-capable bit
//$00:[000-7fff] contains uninitialized RAM and MMIO.
//reset vector must point to ROM at $00:[8000-ffff] to be considered valid.
if(resetvector < 0x8000) return 0;
//some images duplicate the header in multiple locations, and others have completely
//invalid header information that cannot be relied upon.
//below code will analyze the first opcode executed at the specified reset vector to
//determine the probability that this is the correct header.
//most likely opcodes
if(resetop == 0x78 //sei
|| resetop == 0x18 //clc (clc; xce)
|| resetop == 0x38 //sec (sec; xce)
|| resetop == 0x9c //stz $nnnn (stz $4200)
|| resetop == 0x4c //jmp $nnnn
|| resetop == 0x5c //jml $nnnnnn
) score += 8;
//plausible opcodes
if(resetop == 0xc2 //rep #$nn
|| resetop == 0xe2 //sep #$nn
|| resetop == 0xad //lda $nnnn
|| resetop == 0xae //ldx $nnnn
|| resetop == 0xac //ldy $nnnn
|| resetop == 0xaf //lda $nnnnnn
|| resetop == 0xa9 //lda #$nn
|| resetop == 0xa2 //ldx #$nn
|| resetop == 0xa0 //ldy #$nn
|| resetop == 0x20 //jsr $nnnn
|| resetop == 0x22 //jsl $nnnnnn
) score += 4;
//implausible opcodes
if(resetop == 0x40 //rti
|| resetop == 0x60 //rts
|| resetop == 0x6b //rtl
|| resetop == 0xcd //cmp $nnnn
|| resetop == 0xec //cpx $nnnn
|| resetop == 0xcc //cpy $nnnn
) score -= 4;
//least likely opcodes
if(resetop == 0x00 //brk #$nn
|| resetop == 0x02 //cop #$nn
|| resetop == 0xdb //stp
|| resetop == 0x42 //wdm
|| resetop == 0xff //sbc $nnnnnn,x
) score -= 8;
//at times, both the header and reset vector's first opcode will match ...
//fallback and rely on info validity in these cases to determine more likely header.
//a valid checksum is the biggest indicator of a valid header.
if((checksum + complement) == 0xffff && (checksum != 0) && (complement != 0)) score += 4;
if(addr == 0x007fc0 && mapper == 0x20) score += 2; //0x20 is usually LoROM
if(addr == 0x00ffc0 && mapper == 0x21) score += 2; //0x21 is usually HiROM
if(addr == 0x007fc0 && mapper == 0x22) score += 2; //0x22 is usually ExLoROM
if(addr == 0x40ffc0 && mapper == 0x25) score += 2; //0x25 is usually ExHiROM
if(data[addr + Company] == 0x33) score += 2; //0x33 indicates extended header
if(data[addr + RomType] < 0x08) score++;
if(data[addr + RomSize] < 0x10) score++;
if(data[addr + RamSize] < 0x08) score++;
if(data[addr + CartRegion] < 14) score++;
if(score < 0) score = 0;
return score;
}
unsigned snes_information::gameboy_ram_size(const uint8_t *data, unsigned size) {
if(size < 512) return 0;
switch(data[0x0149]) {
case 0x00: return 0 * 1024;
case 0x01: return 8 * 1024;
case 0x02: return 8 * 1024;
case 0x03: return 32 * 1024;
case 0x04: return 128 * 1024;
case 0x05: return 128 * 1024;
default: return 128 * 1024;
}
}
bool snes_information::gameboy_has_rtc(const uint8_t *data, unsigned size) {
if(size < 512) return false;
if(data[0x0147] == 0x0f ||data[0x0147] == 0x10) return true;
return false;
}
}
#endif

62
snesfilter/nall/sort.hpp Normal file
View File

@@ -0,0 +1,62 @@
#ifndef NALL_SORT_HPP
#define NALL_SORT_HPP
#include <nall/utility.hpp>
//class: merge sort
//average: O(n log n)
//worst: O(n log n)
//memory: O(n)
//stack: O(log n)
//stable?: yes
//notes:
//there are two primary reasons for choosing merge sort
//over the (usually) faster quick sort*:
//1: it is a stable sort.
//2: it lacks O(n^2) worst-case overhead.
//(* which is also O(n log n) in the average case.)
namespace nall {
template<typename T>
void sort(T list[], unsigned length) {
if(length <= 1) return; //nothing to sort
//use insertion sort to quickly sort smaller blocks
if(length < 64) {
for(unsigned i = 0; i < length; i++) {
unsigned min = i;
for(unsigned j = i + 1; j < length; j++) {
if(list[j] < list[min]) min = j;
}
if(min != i) swap(list[i], list[min]);
}
return;
}
//split list in half and recursively sort both
unsigned middle = length / 2;
sort(list, middle);
sort(list + middle, length - middle);
//left and right are sorted here; perform merge sort
T *buffer = new T[length];
unsigned offset = 0;
unsigned left = 0;
unsigned right = middle;
while(left < middle && right < length) {
if(list[left] < list[right]) {
buffer[offset++] = list[left++];
} else {
buffer[offset++] = list[right++];
}
}
while(left < middle) buffer[offset++] = list[left++];
while(right < length) buffer[offset++] = list[right++];
for(unsigned i = 0; i < length; i++) list[i] = buffer[i];
delete[] buffer;
}
}
#endif

View File

@@ -0,0 +1,20 @@
#ifndef NALL_STATIC_HPP
#define NALL_STATIC_HPP
namespace nall {
template<bool C, typename T, typename F> struct static_if { typedef T type; };
template<typename T, typename F> struct static_if<false, T, F> { typedef F type; };
template<typename C, typename T, typename F> struct mp_static_if { typedef typename static_if<C::type, T, F>::type type; };
template<bool A, bool B> struct static_and { enum { value = false }; };
template<> struct static_and<true, true> { enum { value = true }; };
template<typename A, typename B> struct mp_static_and { enum { value = static_and<A::value, B::value>::value }; };
template<bool A, bool B> struct static_or { enum { value = false }; };
template<> struct static_or<false, true> { enum { value = true }; };
template<> struct static_or<true, false> { enum { value = true }; };
template<> struct static_or<true, true> { enum { value = true }; };
template<typename A, typename B> struct mp_static_or { enum { value = static_or<A::value, B::value>::value }; };
}
#endif

View File

@@ -30,17 +30,15 @@
#endif
namespace nall {
static_assert(sizeof(int8_t) == 1, "int8_t is not of the correct size" );
static_assert(sizeof(int16_t) == 2, "int16_t is not of the correct size");
static_assert(sizeof(int32_t) == 4, "int32_t is not of the correct size");
static_assert(sizeof(int64_t) == 8, "int64_t is not of the correct size");
static static_assert<sizeof(int8_t) == 1> int8_t_assert;
static static_assert<sizeof(int16_t) == 2> int16_t_assert;
static static_assert<sizeof(int32_t) == 4> int32_t_assert;
static static_assert<sizeof(int64_t) == 8> int64_t_assert;
static_assert(sizeof(uint8_t) == 1, "int8_t is not of the correct size" );
static_assert(sizeof(uint16_t) == 2, "int16_t is not of the correct size");
static_assert(sizeof(uint32_t) == 4, "int32_t is not of the correct size");
static_assert(sizeof(uint64_t) == 8, "int64_t is not of the correct size");
}
static static_assert<sizeof(uint8_t) == 1> uint8_t_assert;
static static_assert<sizeof(uint16_t) == 2> uint16_t_assert;
static static_assert<sizeof(uint32_t) == 4> uint32_t_assert;
static static_assert<sizeof(uint64_t) == 8> uint64_t_assert;
} //namespace nall
#endif //ifndef NALL_STDINT_HPP
#endif

View File

@@ -0,0 +1,29 @@
#ifndef NALL_STRING_HPP
#define NALL_STRING_HPP
#include <initializer_list>
#include <nall/utility.hpp>
#include <nall/string/base.hpp>
#include <nall/string/core.hpp>
#include <nall/string/cast.hpp>
#include <nall/string/compare.hpp>
#include <nall/string/convert.hpp>
#include <nall/string/filename.hpp>
#include <nall/string/match.hpp>
#include <nall/string/math.hpp>
#include <nall/string/strl.hpp>
#include <nall/string/strpos.hpp>
#include <nall/string/trim.hpp>
#include <nall/string/replace.hpp>
#include <nall/string/split.hpp>
#include <nall/string/utility.hpp>
#include <nall/string/variadic.hpp>
#include <nall/string/xml.hpp>
namespace nall {
template<> struct has_length<string> { enum { value = true }; };
template<> struct has_size<lstring> { enum { value = true }; };
}
#endif

View File

@@ -0,0 +1,136 @@
#ifndef NALL_STRING_BASE_HPP
#define NALL_STRING_BASE_HPP
#include <stdarg.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <nall/concept.hpp>
#include <nall/stdint.hpp>
#include <nall/utf8.hpp>
#include <nall/vector.hpp>
namespace nall {
class string;
template<typename T> inline string to_string(T);
class string {
public:
inline void reserve(unsigned);
inline unsigned length() const;
inline string& assign(const char*);
inline string& append(const char*);
template<typename T> inline string& operator= (T value);
template<typename T> inline string& operator<<(T value);
inline operator const char*() const;
inline char* operator()();
inline char& operator[](int);
inline bool operator==(const char*) const;
inline bool operator!=(const char*) const;
inline bool operator< (const char*) const;
inline bool operator<=(const char*) const;
inline bool operator> (const char*) const;
inline bool operator>=(const char*) const;
inline string& operator=(const string&);
inline string& operator=(string&&);
inline string();
inline string(const char*);
inline string(const string&);
inline string(string&&);
inline ~string();
inline bool readfile(const char*);
inline string& replace (const char*, const char*);
inline string& qreplace(const char*, const char*);
protected:
char *data;
unsigned size;
#if defined(QSTRING_H)
public:
inline operator QString() const;
#endif
};
class lstring : public linear_vector<string> {
public:
template<typename T> inline lstring& operator<<(T value);
inline int find(const char*);
inline void split (const char*, const char*, unsigned = 0);
inline void qsplit(const char*, const char*, unsigned = 0);
lstring();
lstring(std::initializer_list<string>);
};
//compare.hpp
inline char chrlower(char c);
inline char chrupper(char c);
inline int stricmp(const char *dest, const char *src);
inline bool strbegin (const char *str, const char *key);
inline bool stribegin(const char *str, const char *key);
inline bool strend (const char *str, const char *key);
inline bool striend(const char *str, const char *key);
//convert.hpp
inline char* strlower(char *str);
inline char* strupper(char *str);
inline char* strtr(char *dest, const char *before, const char *after);
inline uintmax_t strhex (const char *str);
inline intmax_t strsigned (const char *str);
inline uintmax_t strunsigned(const char *str);
inline uintmax_t strbin (const char *str);
inline double strdouble (const char *str);
//match.hpp
inline bool match(const char *pattern, const char *str);
//math.hpp
inline bool strint (const char *str, int &result);
inline bool strmath(const char *str, int &result);
//strl.hpp
inline unsigned strlcpy(char *dest, const char *src, unsigned length);
inline unsigned strlcat(char *dest, const char *src, unsigned length);
//trim.hpp
inline char* ltrim(char *str, const char *key = " ");
inline char* rtrim(char *str, const char *key = " ");
inline char* trim (char *str, const char *key = " ");
inline char* ltrim_once(char *str, const char *key = " ");
inline char* rtrim_once(char *str, const char *key = " ");
inline char* trim_once (char *str, const char *key = " ");
//utility.hpp
inline unsigned strlcpy(string &dest, const char *src, unsigned length);
inline unsigned strlcat(string &dest, const char *src, unsigned length);
inline string substr(const char *src, unsigned start = 0, unsigned length = 0);
inline string& strlower(string &str);
inline string& strupper(string &str);
inline string& strtr(string &dest, const char *before, const char *after);
inline string& ltrim(string &str, const char *key = " ");
inline string& rtrim(string &str, const char *key = " ");
inline string& trim (string &str, const char *key = " ");
inline string& ltrim_once(string &str, const char *key = " ");
inline string& rtrim_once(string &str, const char *key = " ");
inline string& trim_once (string &str, const char *key = " ");
template<unsigned length = 0, char padding = '0'> inline string strhex(uintmax_t value);
template<unsigned length = 0, char padding = '0'> inline string strsigned(intmax_t value);
template<unsigned length = 0, char padding = '0'> inline string strunsigned(uintmax_t value);
template<unsigned length = 0, char padding = '0'> inline string strbin(uintmax_t value);
inline unsigned strdouble(char *str, double value);
inline string strdouble(double value);
//variadic.hpp
template<typename... Args> inline string sprint(Args... args);
template<typename... Args> inline void print(Args... args);
};
#endif

View File

@@ -0,0 +1,32 @@
#ifndef NALL_STRING_CAST_HPP
#define NALL_STRING_CAST_HPP
namespace nall {
//this is needed, as C++0x does not support explicit template specialization inside classes
template<> inline string to_string<bool> (bool v) { return v ? "true" : "false"; }
template<> inline string to_string<signed int> (signed int v) { return strsigned(v); }
template<> inline string to_string<unsigned int> (unsigned int v) { return strunsigned(v); }
template<> inline string to_string<double> (double v) { return strdouble(v); }
template<> inline string to_string<char*> (char *v) { return v; }
template<> inline string to_string<const char*> (const char *v) { return v; }
template<> inline string to_string<string> (string v) { return v; }
template<> inline string to_string<const string&>(const string &v) { return v; }
template<typename T> string& string::operator= (T value) { return assign(to_string<T>(value)); }
template<typename T> string& string::operator<<(T value) { return append(to_string<T>(value)); }
template<typename T> lstring& lstring::operator<<(T value) {
operator[](size()).assign(to_string<T>(value));
return *this;
}
#if defined(QSTRING_H)
template<> inline string to_string<QString>(QString v) { return v.toUtf8().constData(); }
template<> inline string to_string<const QString&>(const QString &v) { return v.toUtf8().constData(); }
string::operator QString() const { return QString::fromUtf8(*this); }
#endif
}
#endif

View File

@@ -1,4 +1,7 @@
#ifdef NALL_STRING_CPP
#ifndef NALL_STRING_COMPARE_HPP
#define NALL_STRING_COMPARE_HPP
namespace nall {
char chrlower(char c) {
return (c >= 'A' && c <= 'Z') ? c + ('a' - 'A') : c;
@@ -18,38 +21,6 @@ int stricmp(const char *dest, const char *src) {
return (int)chrlower(*dest) - (int)chrlower(*src);
}
int strpos(const char *str, const char *key) {
int ssl = strlen(str), ksl = strlen(key);
if(ksl > ssl) return -1;
for(int i = 0; i <= ssl - ksl; i++) {
if(!memcmp(str + i, key, ksl)) {
return i;
}
}
return -1;
}
int qstrpos(const char *str, const char *key) {
int ssl = strlen(str), ksl = strlen(key);
if(ksl > ssl) return -1;
for(int i = 0; i <= ssl - ksl;) {
uint8_t x = str[i];
if(x == '\"' || x == '\'') {
uint8_t z = i++;
while(str[i] != x && i < ssl) i++;
if(i >= ssl) i = z;
}
if(!memcmp(str + i, key, ksl)) {
return i;
} else {
i++;
}
}
return -1;
}
bool strbegin(const char *str, const char *key) {
int i, ssl = strlen(str), ksl = strlen(key);
@@ -96,4 +67,6 @@ bool striend(const char *str, const char *key) {
return true;
}
#endif //ifdef NALL_STRING_CPP
}
#endif

View File

@@ -0,0 +1,153 @@
#ifndef NALL_STRING_CONVERT_HPP
#define NALL_STRING_CONVERT_HPP
namespace nall {
char* strlower(char *str) {
if(!str) return 0;
int i = 0;
while(str[i]) {
str[i] = chrlower(str[i]);
i++;
}
return str;
}
char* strupper(char *str) {
if(!str) return 0;
int i = 0;
while(str[i]) {
str[i] = chrupper(str[i]);
i++;
}
return str;
}
char* strtr(char *dest, const char *before, const char *after) {
if(!dest || !before || !after) return dest;
int sl = strlen(dest), bsl = strlen(before), asl = strlen(after);
if(bsl != asl || bsl == 0) return dest; //patterns must be the same length for 1:1 replace
for(unsigned i = 0; i < sl; i++) {
for(unsigned l = 0; l < bsl; l++) {
if(dest[i] == before[l]) {
dest[i] = after[l];
break;
}
}
}
return dest;
}
uintmax_t strhex(const char *str) {
if(!str) return 0;
uintmax_t result = 0;
//skip hex identifiers 0x and $, if present
if(*str == '0' && (*(str + 1) == 'X' || *(str + 1) == 'x')) str += 2;
else if(*str == '$') str++;
while(*str) {
uint8_t x = *str++;
if(x >= '0' && x <= '9') x -= '0';
else if(x >= 'A' && x <= 'F') x -= 'A' - 10;
else if(x >= 'a' && x <= 'f') x -= 'a' - 10;
else break; //stop at first invalid character
result = result * 16 + x;
}
return result;
}
intmax_t strsigned(const char *str) {
if(!str) return 0;
intmax_t result = 0;
bool negate = false;
//check for negation
if(*str == '-') {
negate = true;
str++;
}
while(*str) {
uint8_t x = *str++;
if(x >= '0' && x <= '9') x -= '0';
else break; //stop at first invalid character
result = result * 10 + x;
}
return !negate ? result : -result;
}
uintmax_t strunsigned(const char *str) {
if(!str) return 0;
uintmax_t result = 0;
while(*str) {
uint8_t x = *str++;
if(x >= '0' && x <= '9') x -= '0';
else break; //stop at first invalid character
result = result * 10 + x;
}
return result;
}
uintmax_t strbin(const char *str) {
if(!str) return 0;
uintmax_t result = 0;
//skip bin identifiers 0b and %, if present
if(*str == '0' && (*(str + 1) == 'B' || *(str + 1) == 'b')) str += 2;
else if(*str == '%') str++;
while(*str) {
uint8_t x = *str++;
if(x == '0' || x == '1') x -= '0';
else break; //stop at first invalid character
result = result * 2 + x;
}
return result;
}
double strdouble(const char *str) {
if(!str) return 0.0;
bool negate = false;
//check for negation
if(*str == '-') {
negate = true;
str++;
}
intmax_t result_integral = 0;
while(*str) {
uint8_t x = *str++;
if(x >= '0' && x <= '9') x -= '0';
else if(x == '.' || x == ',') break; //break loop and read fractional part
else return (double)result_integral; //invalid value, assume no fractional part
result_integral = result_integral * 10 + x;
}
intmax_t result_fractional = 0;
while(*str) {
uint8_t x = *str++;
if(x >= '0' && x <= '9') x -= '0';
else break; //stop at first invalid character
result_fractional = result_fractional * 10 + x;
}
//calculate fractional portion
double result = (double)result_fractional;
while((uintmax_t)result > 0) result /= 10.0;
result += (double)result_integral;
return !negate ? result : -result;
}
}
#endif

View File

@@ -0,0 +1,133 @@
#ifndef NALL_STRING_CORE_HPP
#define NALL_STRING_CORE_HPP
namespace nall {
void string::reserve(unsigned size_) {
if(size_ > size) {
size = size_;
data = (char*)realloc(data, size + 1);
data[size] = 0;
}
}
unsigned string::length() const {
return strlen(data);
}
string& string::assign(const char *s) {
unsigned length = strlen(s);
reserve(length);
strcpy(data, s);
return *this;
}
string& string::append(const char *s) {
unsigned length = strlen(data) + strlen(s);
reserve(length);
strcat(data, s);
return *this;
}
string::operator const char*() const {
return data;
}
char* string::operator()() {
return data;
}
char& string::operator[](int index) {
reserve(index);
return data[index];
}
bool string::operator==(const char *str) const { return strcmp(data, str) == 0; }
bool string::operator!=(const char *str) const { return strcmp(data, str) != 0; }
bool string::operator< (const char *str) const { return strcmp(data, str) < 0; }
bool string::operator<=(const char *str) const { return strcmp(data, str) <= 0; }
bool string::operator> (const char *str) const { return strcmp(data, str) > 0; }
bool string::operator>=(const char *str) const { return strcmp(data, str) >= 0; }
string& string::operator=(const string &value) {
assign(value);
return *this;
}
string& string::operator=(string &&source) {
if(data) free(data);
size = source.size;
data = source.data;
source.data = 0;
source.size = 0;
return *this;
}
string::string() {
size = 64;
data = (char*)malloc(size + 1);
*data = 0;
}
string::string(const char *value) {
size = strlen(value);
data = strdup(value);
}
string::string(const string &value) {
size = strlen(value);
data = strdup(value);
}
string::string(string &&source) {
size = source.size;
data = source.data;
source.data = 0;
}
string::~string() {
free(data);
}
bool string::readfile(const char *filename) {
assign("");
#if !defined(_WIN32)
FILE *fp = fopen(filename, "rb");
#else
FILE *fp = _wfopen(utf16_t(filename), L"rb");
#endif
if(!fp) return false;
fseek(fp, 0, SEEK_END);
unsigned size = ftell(fp);
rewind(fp);
char *fdata = new char[size + 1];
unsigned unused = fread(fdata, 1, size, fp);
fclose(fp);
fdata[size] = 0;
assign(fdata);
delete[] fdata;
return true;
}
int lstring::find(const char *key) {
for(unsigned i = 0; i < size(); i++) {
if(operator[](i) == key) return i;
}
return -1;
}
inline lstring::lstring() {
}
inline lstring::lstring(std::initializer_list<string> list) {
for(const string *s = list.begin(); s != list.end(); ++s) {
operator<<(*s);
}
}
}
#endif

View File

@@ -0,0 +1,61 @@
#ifndef NALL_FILENAME_HPP
#define NALL_FILENAME_HPP
namespace nall {
// "foo/bar.c" -> "foo/", "bar.c" -> "./"
inline string dir(char const *name) {
string result = name;
for(signed i = strlen(result); i >= 0; i--) {
if(result[i] == '/' || result[i] == '\\') {
result[i + 1] = 0;
break;
}
if(i == 0) result = "./";
}
return result;
}
// "foo/bar.c" -> "bar.c"
inline string notdir(char const *name) {
for(signed i = strlen(name); i >= 0; i--) {
if(name[i] == '/' || name[i] == '\\') {
name += i + 1;
break;
}
}
string result = name;
return result;
}
// "foo/bar.c" -> "foo/bar"
inline string basename(char const *name) {
string result = name;
for(signed i = strlen(result); i >= 0; i--) {
if(result[i] == '/' || result[i] == '\\') {
//file has no extension
break;
}
if(result[i] == '.') {
result[i] = 0;
break;
}
}
return result;
}
// "foo/bar.c" -> "c"
inline string extension(char const *name) {
for(signed i = strlen(name); i >= 0; i--) {
if(name[i] == '.') {
name += i + 1;
break;
}
}
string result = name;
return result;
}
}
#endif

View File

@@ -1,4 +1,7 @@
#ifdef NALL_STRING_CPP
#ifndef NALL_STRING_MATCH_HPP
#define NALL_STRING_MATCH_HPP
namespace nall {
bool match(const char *p, const char *s) {
const char *p_ = 0, *s_ = 0;
@@ -68,4 +71,6 @@ bool match(const char *p, const char *s) {
}
}
#endif //ifdef NALL_STRING_CPP
}
#endif

View File

@@ -1,4 +1,7 @@
#ifdef NALL_STRING_CPP
#ifndef NALL_STRING_MATH_HPP
#define NALL_STRING_MATH_HPP
namespace nall {
static int eval_integer(const char *&s) {
if(!*s) throw "unrecognized_integer";
@@ -156,4 +159,6 @@ bool strmath(const char *s, int &result) {
}
}
#endif //ifdef NALL_STRING_CPP
}
#endif

View File

@@ -0,0 +1,103 @@
#ifndef NALL_STRING_REPLACE_HPP
#define NALL_STRING_REPLACE_HPP
namespace nall {
string& string::replace(const char *key, const char *token) {
int i, z, ksl = strlen(key), tsl = strlen(token), ssl = length();
unsigned int replace_count = 0, size = ssl;
char *buffer;
if(ksl <= ssl) {
if(tsl > ksl) { //the new string may be longer than the old string...
for(i = 0; i <= ssl - ksl;) { //so let's find out how big of a string we'll need...
if(!memcmp(data + i, key, ksl)) {
replace_count++;
i += ksl;
} else i++;
}
size = ssl + ((tsl - ksl) * replace_count);
reserve(size);
}
buffer = new char[size + 1];
for(i = z = 0; i < ssl;) {
if(i <= ssl - ksl) {
if(!memcmp(data + i, key, ksl)) {
memcpy(buffer + z, token, tsl);
z += tsl;
i += ksl;
} else buffer[z++] = data[i++];
} else buffer[z++] = data[i++];
}
buffer[z] = 0;
assign(buffer);
delete[] buffer;
}
return *this;
}
string& string::qreplace(const char *key, const char *token) {
int i, l, z, ksl = strlen(key), tsl = strlen(token), ssl = length();
unsigned int replace_count = 0, size = ssl;
uint8_t x;
char *buffer;
if(ksl <= ssl) {
if(tsl > ksl) {
for(i = 0; i <= ssl - ksl;) {
x = data[i];
if(x == '\"' || x == '\'') {
l = i;
i++;
while(data[i++] != x) {
if(i == ssl) {
i = l;
break;
}
}
}
if(!memcmp(data + i, key, ksl)) {
replace_count++;
i += ksl;
} else i++;
}
size = ssl + ((tsl - ksl) * replace_count);
reserve(size);
}
buffer = new char[size + 1];
for(i = z = 0; i < ssl;) {
x = data[i];
if(x == '\"' || x == '\'') {
l = i++;
while(data[i] != x && i < ssl)i++;
if(i >= ssl)i = l;
else {
memcpy(buffer + z, data + l, i - l);
z += i - l;
}
}
if(i <= ssl - ksl) {
if(!memcmp(data + i, key, ksl)) {
memcpy(buffer + z, token, tsl);
z += tsl;
i += ksl;
replace_count++;
} else buffer[z++] = data[i++];
} else buffer[z++] = data[i++];
}
buffer[z] = 0;
assign(buffer);
delete[] buffer;
}
return *this;
}
};
#endif

View File

@@ -0,0 +1,56 @@
#ifndef NALL_STRING_SPLIT_HPP
#define NALL_STRING_SPLIT_HPP
namespace nall {
void lstring::split(const char *key, const char *src, unsigned limit) {
reset();
int ssl = strlen(src), ksl = strlen(key);
int lp = 0, split_count = 0;
for(int i = 0; i <= ssl - ksl;) {
if(!memcmp(src + i, key, ksl)) {
strlcpy(operator[](split_count++), src + lp, i - lp + 1);
i += ksl;
lp = i;
if(!--limit) break;
} else i++;
}
operator[](split_count++) = src + lp;
}
void lstring::qsplit(const char *key, const char *src, unsigned limit) {
reset();
int ssl = strlen(src), ksl = strlen(key);
int lp = 0, split_count = 0;
for(int i = 0; i <= ssl - ksl;) {
uint8_t x = src[i];
if(x == '\"' || x == '\'') {
int z = i++; //skip opening quote
while(i < ssl && src[i] != x) i++;
if(i >= ssl) i = z; //failed match, rewind i
else {
i++; //skip closing quote
continue; //restart in case next char is also a quote
}
}
if(!memcmp(src + i, key, ksl)) {
strlcpy(operator[](split_count++), src + lp, i - lp + 1);
i += ksl;
lp = i;
if(!--limit) break;
} else i++;
}
operator[](split_count++) = src + lp;
}
};
#endif

View File

@@ -1,12 +1,15 @@
#ifdef NALL_STRING_CPP
#ifndef NALL_STRING_STRL_HPP
#define NALL_STRING_STRL_HPP
namespace nall {
//strlcpy, strlcat based on OpenBSD implementation by Todd C. Miller
//return = strlen(src)
size_t strlcpy(char *dest, const char *src, size_t length) {
unsigned strlcpy(char *dest, const char *src, unsigned length) {
char *d = dest;
const char *s = src;
size_t n = length;
unsigned n = length;
if(n) {
while(--n && (*d++ = *s++)); //copy as many bytes as possible, or until null terminator reached
@@ -21,13 +24,13 @@ size_t strlcpy(char *dest, const char *src, size_t length) {
}
//return = strlen(src) + min(length, strlen(dest))
size_t strlcat(char *dest, const char *src, size_t length) {
unsigned strlcat(char *dest, const char *src, unsigned length) {
char *d = dest;
const char *s = src;
size_t n = length;
unsigned n = length;
while(n-- && *d) d++; //find end of dest
size_t dlength = d - dest;
unsigned dlength = d - dest;
n = length - dlength; //subtract length of dest from maximum string length
if(!n) return dlength + strlen(s);
@@ -44,4 +47,6 @@ size_t strlcat(char *dest, const char *src, size_t length) {
return dlength + (s - src); //return length of resulting string, sans null terminator
}
#endif //ifdef NALL_STRING_CPP
}
#endif

View File

@@ -0,0 +1,41 @@
#ifndef NALL_STRING_STRPOS_HPP
#define NALL_STRING_STRPOS_HPP
//usage example:
//if(auto pos = strpos(str, key)) print(pos(), "\n");
//prints position of key within str, only if it is found
namespace nall {
optional<unsigned> inline strpos(const char *str, const char *key) {
unsigned ssl = strlen(str), ksl = strlen(key);
if(ksl > ssl) return { false, 0 };
for(unsigned i = 0; i <= ssl - ksl; i++) {
if(!memcmp(str + i, key, ksl)) return { true, i };
}
return { false, 0 };
}
optional<unsigned> inline qstrpos(const char *str, const char *key) {
unsigned ssl = strlen(str), ksl = strlen(key);
if(ksl > ssl) return { false, 0 };
for(unsigned i = 0; i <= ssl - ksl;) {
uint8_t x = str[i];
if(x == '\"' || x == '\'') {
uint8_t z = i++;
while(str[i] != x && i < ssl) i++;
if(i >= ssl) i = z;
}
if(!memcmp(str + i, key, ksl)) return { true, i };
i++;
}
return { false, 0 };
}
}
#endif

View File

@@ -1,8 +1,18 @@
#ifdef NALL_STRING_CPP
#ifndef NALL_STRING_TRIM_HPP
#define NALL_STRING_TRIM_HPP
namespace nall {
char* ltrim(char *str, const char *key) {
if(!key || !*key) return str;
while(strbegin(str, key)) strcpy(str, str + strlen(key));
while(strbegin(str, key)) {
char *dest = str, *src = str + strlen(key);
while(true) {
*dest = *src++;
if(!*dest) break;
dest++;
}
}
return str;
}
@@ -18,7 +28,14 @@ char* trim(char *str, const char *key) {
char* ltrim_once(char *str, const char *key) {
if(!key || !*key) return str;
if(strbegin(str, key)) strcpy(str, str + strlen(key));
if(strbegin(str, key)) {
char *dest = str, *src = str + strlen(key);
while(true) {
*dest = *src++;
if(!*dest) break;
dest++;
}
}
return str;
}
@@ -32,4 +49,6 @@ char* trim_once(char *str, const char *key) {
return ltrim_once(rtrim_once(str, key), key);
}
#endif //ifdef NALL_STRING_CPP
}
#endif

View File

@@ -0,0 +1,169 @@
#ifndef NALL_STRING_UTILITY_HPP
#define NALL_STRING_UTILITY_HPP
namespace nall {
unsigned strlcpy(string &dest, const char *src, unsigned length) {
dest.reserve(length);
return strlcpy(dest(), src, length);
}
unsigned strlcat(string &dest, const char *src, unsigned length) {
dest.reserve(length);
return strlcat(dest(), src, length);
}
string substr(const char *src, unsigned start, unsigned length) {
string dest;
if(length == 0) {
//copy entire string
dest = src + start;
} else {
//copy partial string
strlcpy(dest, src + start, length + 1);
}
return dest;
}
/* very simplistic wrappers to return string& instead of char* type */
string& strlower(string &str) { strlower(str()); return str; }
string& strupper(string &str) { strupper(str()); return str; }
string& strtr(string &dest, const char *before, const char *after) { strtr(dest(), before, after); return dest; }
string& ltrim(string &str, const char *key) { ltrim(str(), key); return str; }
string& rtrim(string &str, const char *key) { rtrim(str(), key); return str; }
string& trim (string &str, const char *key) { trim (str(), key); return str; }
string& ltrim_once(string &str, const char *key) { ltrim_once(str(), key); return str; }
string& rtrim_once(string &str, const char *key) { rtrim_once(str(), key); return str; }
string& trim_once (string &str, const char *key) { trim_once (str(), key); return str; }
/* arithmetic <> string */
template<unsigned length, char padding> string strhex(uintmax_t value) {
string output;
unsigned offset = 0;
//render string backwards, as we do not know its length yet
do {
unsigned n = value & 15;
output[offset++] = n < 10 ? '0' + n : 'a' + n - 10;
value >>= 4;
} while(value);
while(offset < length) output[offset++] = padding;
output[offset--] = 0;
//reverse the string in-place
for(unsigned i = 0; i < (offset + 1) >> 1; i++) {
char temp = output[i];
output[i] = output[offset - i];
output[offset - i] = temp;
}
return output;
}
template<unsigned length, char padding> string strsigned(intmax_t value) {
string output;
unsigned offset = 0;
bool negative = value < 0;
if(negative) value = abs(value);
do {
unsigned n = value % 10;
output[offset++] = '0' + n;
value /= 10;
} while(value);
while(offset < length) output[offset++] = padding;
if(negative) output[offset++] = '-';
output[offset--] = 0;
for(unsigned i = 0; i < (offset + 1) >> 1; i++) {
char temp = output[i];
output[i] = output[offset - i];
output[offset - i] = temp;
}
return output;
}
template<unsigned length, char padding> string strunsigned(uintmax_t value) {
string output;
unsigned offset = 0;
do {
unsigned n = value % 10;
output[offset++] = '0' + n;
value /= 10;
} while(value);
while(offset < length) output[offset++] = padding;
output[offset--] = 0;
for(unsigned i = 0; i < (offset + 1) >> 1; i++) {
char temp = output[i];
output[i] = output[offset - i];
output[offset - i] = temp;
}
return output;
}
template<unsigned length, char padding> string strbin(uintmax_t value) {
string output;
unsigned offset = 0;
do {
unsigned n = value & 1;
output[offset++] = '0' + n;
value >>= 1;
} while(value);
while(offset < length) output[offset++] = padding;
output[offset--] = 0;
for(unsigned i = 0; i < (offset + 1) >> 1; i++) {
char temp = output[i];
output[i] = output[offset - i];
output[offset - i] = temp;
}
return output;
}
//using sprintf is certainly not the most ideal method to convert
//a double to a string ... but attempting to parse a double by
//hand, digit-by-digit, results in subtle rounding errors.
unsigned strdouble(char *str, double value) {
char buffer[256];
sprintf(buffer, "%f", value);
//remove excess 0's in fraction (2.500000 -> 2.5)
for(char *p = buffer; *p; p++) {
if(*p == '.') {
char *p = buffer + strlen(buffer) - 1;
while(*p == '0') {
if(*(p - 1) != '.') *p = 0; //... but not for eg 1.0 -> 1.
p--;
}
break;
}
}
unsigned length = strlen(buffer);
if(str) strcpy(str, buffer);
return length + 1;
}
string strdouble(double value) {
string temp;
temp.reserve(strdouble(0, value));
strdouble(temp(), value);
return temp;
}
}
#endif

View File

@@ -0,0 +1,27 @@
#ifndef NALL_STRING_VARIADIC_HPP
#define NALL_STRING_VARIADIC_HPP
namespace nall {
static void isprint(string &output) {
}
template<typename T, typename... Args>
static void isprint(string &output, T value, Args... args) {
output << to_string<T>(value);
isprint(output, args...);
}
template<typename... Args> inline string sprint(Args... args) {
string output;
isprint(output, args...);
return output;
}
template<typename... Args> inline void print(Args... args) {
printf("%s", (const char*)sprint(args...));
}
}
#endif

View File

@@ -0,0 +1,265 @@
#ifndef NALL_STRING_XML_HPP
#define NALL_STRING_XML_HPP
//XML subset parser
//version 0.05
namespace nall {
struct xml_attribute {
string name;
string content;
virtual string parse() const;
};
struct xml_element : xml_attribute {
string parse() const;
linear_vector<xml_attribute> attribute;
linear_vector<xml_element> element;
protected:
void parse_doctype(const char *&data);
bool parse_head(string data);
bool parse_body(const char *&data);
friend xml_element xml_parse(const char *data);
};
inline string xml_attribute::parse() const {
string data;
unsigned offset = 0;
const char *source = content;
while(*source) {
if(*source == '&') {
if(strbegin(source, "&lt;")) { data[offset++] = '<'; source += 4; continue; }
if(strbegin(source, "&gt;")) { data[offset++] = '>'; source += 4; continue; }
if(strbegin(source, "&amp;")) { data[offset++] = '&'; source += 5; continue; }
if(strbegin(source, "&apos;")) { data[offset++] = '\''; source += 6; continue; }
if(strbegin(source, "&quot;")) { data[offset++] = '"'; source += 6; continue; }
}
//reject illegal characters
if(*source == '&') return "";
if(*source == '<') return "";
if(*source == '>') return "";
data[offset++] = *source++;
}
data[offset] = 0;
return data;
}
inline string xml_element::parse() const {
string data;
unsigned offset = 0;
const char *source = content;
while(*source) {
if(*source == '&') {
if(strbegin(source, "&lt;")) { data[offset++] = '<'; source += 4; continue; }
if(strbegin(source, "&gt;")) { data[offset++] = '>'; source += 4; continue; }
if(strbegin(source, "&amp;")) { data[offset++] = '&'; source += 5; continue; }
if(strbegin(source, "&apos;")) { data[offset++] = '\''; source += 6; continue; }
if(strbegin(source, "&quot;")) { data[offset++] = '"'; source += 6; continue; }
}
if(strbegin(source, "<!--")) {
if(auto pos = strpos(source, "-->")) {
source += pos() + 3;
continue;
} else {
return "";
}
}
if(strbegin(source, "<![CDATA[")) {
if(auto pos = strpos(source, "]]>")) {
string cdata = substr(source, 9, pos() - 9);
data << cdata;
offset += strlen(cdata);
source += offset + 3;
continue;
} else {
return "";
}
}
//reject illegal characters
if(*source == '&') return "";
if(*source == '<') return "";
if(*source == '>') return "";
data[offset++] = *source++;
}
data[offset] = 0;
return data;
}
inline void xml_element::parse_doctype(const char *&data) {
name = "!DOCTYPE";
const char *content_begin = data;
signed counter = 0;
while(*data) {
char value = *data++;
if(value == '<') counter++;
if(value == '>') counter--;
if(counter < 0) {
content = substr(content_begin, 0, data - content_begin - 1);
return;
}
}
throw "...";
}
inline bool xml_element::parse_head(string data) {
data.qreplace("\t", " ");
data.qreplace("\r", " ");
data.qreplace("\n", " ");
while(qstrpos(data, " ")) data.qreplace(" ", " ");
data.qreplace(" =", "=");
data.qreplace("= ", "=");
rtrim(data);
lstring part;
part.qsplit(" ", data);
name = part[0];
if(name == "") throw "...";
for(unsigned i = 1; i < part.size(); i++) {
lstring side;
side.qsplit("=", part[i]);
if(side.size() != 2) throw "...";
xml_attribute attr;
attr.name = side[0];
attr.content = side[1];
if(strbegin(attr.content, "\"") && strend(attr.content, "\"")) trim_once(attr.content, "\"");
else if(strbegin(attr.content, "'") && strend(attr.content, "'")) trim_once(attr.content, "'");
else throw "...";
attribute.append(attr);
}
}
inline bool xml_element::parse_body(const char *&data) {
while(true) {
if(!*data) return false;
if(*data++ != '<') continue;
if(*data == '/') return false;
if(strbegin(data, "!DOCTYPE") == true) {
parse_doctype(data);
return true;
}
if(strbegin(data, "!--")) {
if(auto offset = strpos(data, "-->")) {
data += offset() + 3;
continue;
} else {
throw "...";
}
}
if(strbegin(data, "![CDATA[")) {
if(auto offset = strpos(data, "]]>")) {
data += offset() + 3;
continue;
} else {
throw "...";
}
}
auto offset = strpos(data, ">");
if(!offset) throw "...";
string tag = substr(data, 0, offset());
data += offset() + 1;
const char *content_begin = data;
bool self_terminating = false;
if(strend(tag, "?") == true) {
self_terminating = true;
rtrim_once(tag, "?");
} else if(strend(tag, "/") == true) {
self_terminating = true;
rtrim_once(tag, "/");
}
parse_head(tag);
if(self_terminating) return true;
while(*data) {
unsigned index = element.size();
xml_element node;
if(node.parse_body(data) == false) {
if(*data == '/') {
signed length = data - content_begin - 1;
if(length > 0) content = substr(content_begin, 0, length);
data++;
auto offset = strpos(data, ">");
if(!offset) throw "...";
tag = substr(data, 0, offset());
data += offset() + 1;
tag.replace("\t", " ");
tag.replace("\r", " ");
tag.replace("\n", " ");
while(strpos(tag, " ")) tag.replace(" ", " ");
rtrim(tag);
if(name != tag) throw "...";
return true;
}
} else {
element.append(node);
}
}
}
}
//ensure there is only one root element
inline bool xml_validate(xml_element &document) {
unsigned root_counter = 0;
for(unsigned i = 0; i < document.element.size(); i++) {
string &name = document.element[i].name;
if(strbegin(name, "?")) continue;
if(strbegin(name, "!")) continue;
if(++root_counter > 1) return false;
}
return true;
}
inline xml_element xml_parse(const char *data) {
xml_element self;
try {
while(*data) {
xml_element node;
if(node.parse_body(data) == false) {
break;
} else {
self.element.append(node);
}
}
if(xml_validate(self) == false) throw "...";
return self;
} catch(const char*) {
xml_element empty;
return empty;
}
}
}
#endif

190
snesfilter/nall/ups.hpp Normal file
View File

@@ -0,0 +1,190 @@
#ifndef NALL_UPS_HPP
#define NALL_UPS_HPP
#include <stdio.h>
#include <nall/algorithm.hpp>
#include <nall/crc32.hpp>
#include <nall/file.hpp>
#include <nall/stdint.hpp>
namespace nall {
class ups {
public:
enum result {
ok,
patch_unreadable,
patch_unwritable,
patch_invalid,
input_invalid,
output_invalid,
patch_crc32_invalid,
input_crc32_invalid,
output_crc32_invalid,
};
ups::result create(const char *patch_fn, const uint8_t *x_data, unsigned x_size, const uint8_t *y_data, unsigned y_size) {
if(!fp.open(patch_fn, file::mode_write)) return patch_unwritable;
crc32 = ~0;
uint32_t x_crc32 = crc32_calculate(x_data, x_size);
uint32_t y_crc32 = crc32_calculate(y_data, y_size);
//header
write('U');
write('P');
write('S');
write('1');
encptr(x_size);
encptr(y_size);
//body
unsigned max_size = max(x_size, y_size);
unsigned relative = 0;
for(unsigned i = 0; i < max_size;) {
uint8_t x = i < x_size ? x_data[i] : 0x00;
uint8_t y = i < y_size ? y_data[i] : 0x00;
if(x == y) {
i++;
continue;
}
encptr(i++ - relative);
write(x ^ y);
while(true) {
if(i >= max_size) {
write(0x00);
break;
}
x = i < x_size ? x_data[i] : 0x00;
y = i < y_size ? y_data[i] : 0x00;
i++;
write(x ^ y);
if(x == y) break;
}
relative = i;
}
//footer
for(unsigned i = 0; i < 4; i++) write(x_crc32 >> (i << 3));
for(unsigned i = 0; i < 4; i++) write(y_crc32 >> (i << 3));
uint32_t p_crc32 = ~crc32;
for(unsigned i = 0; i < 4; i++) write(p_crc32 >> (i << 3));
fp.close();
return ok;
}
ups::result apply(const uint8_t *p_data, unsigned p_size, const uint8_t *x_data, unsigned x_size, uint8_t *&y_data, unsigned &y_size) {
if(p_size < 18) return patch_invalid;
p_buffer = p_data;
crc32 = ~0;
//header
if(read() != 'U') return patch_invalid;
if(read() != 'P') return patch_invalid;
if(read() != 'S') return patch_invalid;
if(read() != '1') return patch_invalid;
unsigned px_size = decptr();
unsigned py_size = decptr();
//mirror
if(x_size != px_size && x_size != py_size) return input_invalid;
y_size = (x_size == px_size) ? py_size : px_size;
y_data = new uint8_t[y_size]();
for(unsigned i = 0; i < x_size && i < y_size; i++) y_data[i] = x_data[i];
for(unsigned i = x_size; i < y_size; i++) y_data[i] = 0x00;
//body
unsigned relative = 0;
while(p_buffer < p_data + p_size - 12) {
relative += decptr();
while(true) {
uint8_t x = read();
if(x && relative < y_size) {
uint8_t y = relative < x_size ? x_data[relative] : 0x00;
y_data[relative] = x ^ y;
}
relative++;
if(!x) break;
}
}
//footer
unsigned px_crc32 = 0, py_crc32 = 0, pp_crc32 = 0;
for(unsigned i = 0; i < 4; i++) px_crc32 |= read() << (i << 3);
for(unsigned i = 0; i < 4; i++) py_crc32 |= read() << (i << 3);
uint32_t p_crc32 = ~crc32;
for(unsigned i = 0; i < 4; i++) pp_crc32 |= read() << (i << 3);
uint32_t x_crc32 = crc32_calculate(x_data, x_size);
uint32_t y_crc32 = crc32_calculate(y_data, y_size);
if(px_size != py_size) {
if(x_size == px_size && x_crc32 != px_crc32) return input_crc32_invalid;
if(x_size == py_size && x_crc32 != py_crc32) return input_crc32_invalid;
if(y_size == px_size && y_crc32 != px_crc32) return output_crc32_invalid;
if(y_size == py_size && y_crc32 != py_crc32) return output_crc32_invalid;
} else {
if(x_crc32 != px_crc32 && x_crc32 != py_crc32) return input_crc32_invalid;
if(y_crc32 != px_crc32 && y_crc32 != py_crc32) return output_crc32_invalid;
if(x_crc32 == y_crc32 && px_crc32 != py_crc32) return output_crc32_invalid;
if(x_crc32 != y_crc32 && px_crc32 == py_crc32) return output_crc32_invalid;
}
if(p_crc32 != pp_crc32) return patch_crc32_invalid;
return ok;
}
private:
file fp;
uint32_t crc32;
const uint8_t *p_buffer;
uint8_t read() {
uint8_t n = *p_buffer++;
crc32 = crc32_adjust(crc32, n);
return n;
}
void write(uint8_t n) {
fp.write(n);
crc32 = crc32_adjust(crc32, n);
}
void encptr(uint64_t offset) {
while(true) {
uint64_t x = offset & 0x7f;
offset >>= 7;
if(offset == 0) {
write(0x80 | x);
break;
}
write(x);
offset--;
}
}
uint64_t decptr() {
uint64_t offset = 0, shift = 1;
while(true) {
uint8_t x = read();
offset += (x & 0x7f) * shift;
if(x & 0x80) break;
shift <<= 7;
offset += shift;
}
return offset;
}
};
}
#endif

72
snesfilter/nall/utf8.hpp Normal file
View File

@@ -0,0 +1,72 @@
#ifndef NALL_UTF8_HPP
#define NALL_UTF8_HPP
//UTF-8 <> UTF-16 conversion
//used only for Win32; Linux, etc use UTF-8 internally
#if defined(_WIN32)
#undef _WIN32_WINNT
#define _WIN32_WINNT 0x0501
#undef NOMINMAX
#define NOMINMAX
#include <windows.h>
#undef interface
namespace nall {
//UTF-8 to UTF-16
class utf16_t {
public:
operator wchar_t*() {
return buffer;
}
operator const wchar_t*() const {
return buffer;
}
utf16_t(const char *s = "") {
if(!s) s = "";
unsigned length = MultiByteToWideChar(CP_UTF8, 0, s, -1, 0, 0);
buffer = new wchar_t[length + 1]();
MultiByteToWideChar(CP_UTF8, 0, s, -1, buffer, length);
}
~utf16_t() {
delete[] buffer;
}
private:
wchar_t *buffer;
};
//UTF-16 to UTF-8
class utf8_t {
public:
operator char*() {
return buffer;
}
operator const char*() const {
return buffer;
}
utf8_t(const wchar_t *s = L"") {
if(!s) s = L"";
unsigned length = WideCharToMultiByte(CP_UTF8, 0, s, -1, 0, 0, (const char*)0, (BOOL*)0);
buffer = new char[length + 1]();
WideCharToMultiByte(CP_UTF8, 0, s, -1, buffer, length, (const char*)0, (BOOL*)0);
}
~utf8_t() {
delete[] buffer;
}
private:
char *buffer;
};
}
#endif //if defined(_WIN32)
#endif

View File

@@ -0,0 +1,39 @@
#ifndef NALL_UTILITY_HPP
#define NALL_UTILITY_HPP
#include <type_traits>
#include <utility>
namespace nall {
template<bool C, typename T = bool> struct enable_if { typedef T type; };
template<typename T> struct enable_if<false, T> {};
template<typename C, typename T = bool> struct mp_enable_if : enable_if<C::value, T> {};
template<typename T> inline void swap(T &x, T &y) {
T temp(std::move(x));
x = std::move(y);
y = std::move(temp);
}
template<typename T> struct base_from_member {
T value;
base_from_member(T value_) : value(value_) {}
};
template<typename T> class optional {
bool valid;
T value;
public:
inline operator bool() const { return valid; }
inline const T& operator()() const { if(!valid) throw; return value; }
inline optional(bool valid, const T &value) : valid(valid), value(value) {}
};
template<typename T> inline T* allocate(unsigned size, const T &value) {
T *array = new T[size];
for(unsigned i = 0; i < size; i++) array[i] = value;
return array;
}
}
#endif

View File

@@ -0,0 +1,92 @@
#ifndef NALL_VARINT_HPP
#define NALL_VARINT_HPP
#include <nall/bit.hpp>
#include <nall/static.hpp>
#include <nall/traits.hpp>
namespace nall {
template<unsigned bits> class uint_t {
private:
enum { bytes = (bits + 7) >> 3 }; //minimum number of bytes needed to store value
typedef typename static_if<
sizeof(int) >= bytes,
unsigned int,
typename static_if<
sizeof(long) >= bytes,
unsigned long,
typename static_if<
sizeof(long long) >= bytes,
unsigned long long,
void
>::type
>::type
>::type T;
static_assert<!is_void<T>::value> uint_assert;
T data;
public:
inline operator T() const { return data; }
inline T operator ++(int) { T r = data; data = uclip<bits>(data + 1); return r; }
inline T operator --(int) { T r = data; data = uclip<bits>(data - 1); return r; }
inline T operator ++() { return data = uclip<bits>(data + 1); }
inline T operator --() { return data = uclip<bits>(data - 1); }
inline T operator =(const T i) { return data = uclip<bits>(i); }
inline T operator |=(const T i) { return data = uclip<bits>(data | i); }
inline T operator ^=(const T i) { return data = uclip<bits>(data ^ i); }
inline T operator &=(const T i) { return data = uclip<bits>(data & i); }
inline T operator<<=(const T i) { return data = uclip<bits>(data << i); }
inline T operator>>=(const T i) { return data = uclip<bits>(data >> i); }
inline T operator +=(const T i) { return data = uclip<bits>(data + i); }
inline T operator -=(const T i) { return data = uclip<bits>(data - i); }
inline T operator *=(const T i) { return data = uclip<bits>(data * i); }
inline T operator /=(const T i) { return data = uclip<bits>(data / i); }
inline T operator %=(const T i) { return data = uclip<bits>(data % i); }
inline uint_t() : data(0) {}
inline uint_t(const T i) : data(uclip<bits>(i)) {}
};
template<unsigned bits> class int_t {
private:
enum { bytes = (bits + 7) >> 3 }; //minimum number of bytes needed to store value
typedef typename static_if<
sizeof(int) >= bytes,
signed int,
typename static_if<
sizeof(long) >= bytes,
signed long,
typename static_if<
sizeof(long long) >= bytes,
signed long long,
void
>::type
>::type
>::type T;
static_assert<!is_void<T>::value> int_assert;
T data;
public:
inline operator T() const { return data; }
inline T operator ++(int) { T r = data; data = sclip<bits>(data + 1); return r; }
inline T operator --(int) { T r = data; data = sclip<bits>(data - 1); return r; }
inline T operator ++() { return data = sclip<bits>(data + 1); }
inline T operator --() { return data = sclip<bits>(data - 1); }
inline T operator =(const T i) { return data = sclip<bits>(i); }
inline T operator |=(const T i) { return data = sclip<bits>(data | i); }
inline T operator ^=(const T i) { return data = sclip<bits>(data ^ i); }
inline T operator &=(const T i) { return data = sclip<bits>(data & i); }
inline T operator<<=(const T i) { return data = sclip<bits>(data << i); }
inline T operator>>=(const T i) { return data = sclip<bits>(data >> i); }
inline T operator +=(const T i) { return data = sclip<bits>(data + i); }
inline T operator -=(const T i) { return data = sclip<bits>(data - i); }
inline T operator *=(const T i) { return data = sclip<bits>(data * i); }
inline T operator /=(const T i) { return data = sclip<bits>(data / i); }
inline T operator %=(const T i) { return data = sclip<bits>(data % i); }
inline int_t() : data(0) {}
inline int_t(const T i) : data(sclip<bits>(i)) {}
};
}
#endif

281
snesfilter/nall/vector.hpp Normal file
View File

@@ -0,0 +1,281 @@
#ifndef NALL_VECTOR_HPP
#define NALL_VECTOR_HPP
#include <initializer_list>
#include <new>
#include <type_traits>
#include <utility>
#include <nall/algorithm.hpp>
#include <nall/bit.hpp>
#include <nall/concept.hpp>
#include <nall/foreach.hpp>
#include <nall/utility.hpp>
namespace nall {
//linear_vector
//memory: O(capacity * 2)
//
//linear_vector uses placement new + manual destructor calls to create a
//contiguous block of memory for all objects. accessing individual elements
//is fast, though resizing the array incurs significant overhead.
//reserve() overhead is reduced from quadratic time to amortized constant time
//by resizing twice as much as requested.
//
//if objects hold memory address references to themselves (introspection), a
//valid copy constructor will be needed to keep pointers valid.
template<typename T> class linear_vector {
protected:
T *pool;
unsigned poolsize, objectsize;
public:
unsigned size() const { return objectsize; }
unsigned capacity() const { return poolsize; }
void reset() {
if(pool) {
for(unsigned i = 0; i < objectsize; i++) pool[i].~T();
free(pool);
}
pool = 0;
poolsize = 0;
objectsize = 0;
}
void reserve(unsigned newsize) {
newsize = bit::round(newsize); //round to nearest power of two (for amortized growth)
T *poolcopy = (T*)malloc(newsize * sizeof(T));
for(unsigned i = 0; i < min(objectsize, newsize); i++) new(poolcopy + i) T(pool[i]);
for(unsigned i = 0; i < objectsize; i++) pool[i].~T();
free(pool);
pool = poolcopy;
poolsize = newsize;
objectsize = min(objectsize, newsize);
}
void resize(unsigned newsize) {
if(newsize > poolsize) reserve(newsize);
if(newsize < objectsize) {
//vector is shrinking; destroy excess objects
for(unsigned i = newsize; i < objectsize; i++) pool[i].~T();
} else if(newsize > objectsize) {
//vector is expanding; allocate new objects
for(unsigned i = objectsize; i < newsize; i++) new(pool + i) T;
}
objectsize = newsize;
}
void append(const T data) {
if(objectsize + 1 > poolsize) reserve(objectsize + 1);
new(pool + objectsize++) T(data);
}
template<typename U> void insert(unsigned index, const U list) {
linear_vector<T> merged;
for(unsigned i = 0; i < index; i++) merged.append(pool[i]);
foreach(item, list) merged.append(item);
for(unsigned i = index; i < objectsize; i++) merged.append(pool[i]);
operator=(merged);
}
void insert(unsigned index, const T item) {
insert(index, linear_vector<T>{ item });
}
void remove(unsigned index, unsigned count = 1) {
for(unsigned i = index; count + i < objectsize; i++) {
pool[i] = pool[count + i];
}
if(count + index >= objectsize) resize(index); //every element >= index was removed
else resize(objectsize - count);
}
inline T& operator[](unsigned index) {
if(index >= objectsize) resize(index + 1);
return pool[index];
}
inline const T& operator[](unsigned index) const {
if(index >= objectsize) throw "vector[] out of bounds";
return pool[index];
}
//copy
inline linear_vector<T>& operator=(const linear_vector<T> &source) {
reset();
reserve(source.capacity());
resize(source.size());
for(unsigned i = 0; i < source.size(); i++) operator[](i) = source.operator[](i);
return *this;
}
linear_vector(const linear_vector<T> &source) : pool(0), poolsize(0), objectsize(0) {
operator=(source);
}
//move
inline linear_vector<T>& operator=(linear_vector<T> &&source) {
reset();
pool = source.pool;
poolsize = source.poolsize;
objectsize = source.objectsize;
source.pool = 0;
source.reset();
return *this;
}
linear_vector(linear_vector<T> &&source) : pool(0), poolsize(0), objectsize(0) {
operator=(std::move(source));
}
//construction
linear_vector() : pool(0), poolsize(0), objectsize(0) {
}
linear_vector(std::initializer_list<T> list) : pool(0), poolsize(0), objectsize(0) {
for(const T *p = list.begin(); p != list.end(); ++p) append(*p);
}
~linear_vector() {
reset();
}
};
//pointer_vector
//memory: O(1)
//
//pointer_vector keeps an array of pointers to each vector object. this adds
//significant overhead to individual accesses, but allows for optimal memory
//utilization.
//
//by guaranteeing that the base memory address of each objects never changes,
//this avoids the need for an object to have a valid copy constructor.
template<typename T> class pointer_vector {
protected:
T **pool;
unsigned poolsize, objectsize;
public:
unsigned size() const { return objectsize; }
unsigned capacity() const { return poolsize; }
void reset() {
if(pool) {
for(unsigned i = 0; i < objectsize; i++) { if(pool[i]) delete pool[i]; }
free(pool);
}
pool = 0;
poolsize = 0;
objectsize = 0;
}
void reserve(unsigned newsize) {
newsize = bit::round(newsize); //round to nearest power of two (for amortized growth)
for(unsigned i = newsize; i < objectsize; i++) {
if(pool[i]) { delete pool[i]; pool[i] = 0; }
}
pool = (T**)realloc(pool, newsize * sizeof(T*));
for(unsigned i = poolsize; i < newsize; i++) pool[i] = 0;
poolsize = newsize;
objectsize = min(objectsize, newsize);
}
void resize(unsigned newsize) {
if(newsize > poolsize) reserve(newsize);
for(unsigned i = newsize; i < objectsize; i++) {
if(pool[i]) { delete pool[i]; pool[i] = 0; }
}
objectsize = newsize;
}
void append(const T data) {
if(objectsize + 1 > poolsize) reserve(objectsize + 1);
pool[objectsize++] = new T(data);
}
template<typename U> void insert(unsigned index, const U list) {
pointer_vector<T> merged;
for(unsigned i = 0; i < index; i++) merged.append(*pool[i]);
foreach(item, list) merged.append(item);
for(unsigned i = index; i < objectsize; i++) merged.append(*pool[i]);
operator=(merged);
}
void insert(unsigned index, const T item) {
insert(index, pointer_vector<T>{ item });
}
void remove(unsigned index, unsigned count = 1) {
for(unsigned i = index; count + i < objectsize; i++) {
*pool[i] = *pool[count + i];
}
if(count + index >= objectsize) resize(index); //every element >= index was removed
else resize(objectsize - count);
}
inline T& operator[](unsigned index) {
if(index >= objectsize) resize(index + 1);
if(!pool[index]) pool[index] = new T;
return *pool[index];
}
inline const T& operator[](unsigned index) const {
if(index >= objectsize || !pool[index]) throw "vector[] out of bounds";
return *pool[index];
}
//copy
inline pointer_vector<T>& operator=(const pointer_vector<T> &source) {
reset();
reserve(source.capacity());
resize(source.size());
for(unsigned i = 0; i < source.size(); i++) operator[](i) = source.operator[](i);
return *this;
}
pointer_vector(const pointer_vector<T> &source) : pool(0), poolsize(0), objectsize(0) {
operator=(source);
}
//move
inline pointer_vector<T>& operator=(pointer_vector<T> &&source) {
reset();
pool = source.pool;
poolsize = source.poolsize;
objectsize = source.objectsize;
source.pool = 0;
source.reset();
return *this;
}
pointer_vector(pointer_vector<T> &&source) : pool(0), poolsize(0), objectsize(0) {
operator=(std::move(source));
}
//construction
pointer_vector() : pool(0), poolsize(0), objectsize(0) {
}
pointer_vector(std::initializer_list<T> list) : pool(0), poolsize(0), objectsize(0) {
for(const T *p = list.begin(); p != list.end(); ++p) append(*p);
}
~pointer_vector() {
reset();
}
};
template<typename T> struct has_size<linear_vector<T>> { enum { value = true }; };
template<typename T> struct has_size<pointer_vector<T>> { enum { value = true }; };
}
#endif

380
snesfilter/ntsc/ntsc.cpp Normal file
View File

@@ -0,0 +1,380 @@
#include "snes_ntsc/snes_ntsc.h"
#include "snes_ntsc/snes_ntsc.c"
#include "ntsc.moc.hpp"
#include "ntsc.moc"
void NTSCFilter::bind(configuration &config) {
config.attach(hue = 0.0, "snesfilter.ntsc.hue");
config.attach(saturation = 0.0, "snesfilter.ntsc.saturation");
config.attach(contrast = 0.0, "snesfilter.ntsc.contrast");
config.attach(brightness = 0.0, "snesfilter.ntsc.brightness");
config.attach(sharpness = 0.0, "snesfilter.ntsc.sharpness");
config.attach(gamma = 0.0, "snesfilter.ntsc.gamma");
config.attach(resolution = 0.0, "snesfilter.ntsc.resolution");
config.attach(artifacts = 0.0, "snesfilter.ntsc.artifacts");
config.attach(fringing = 0.0, "snesfilter.ntsc.fringing");
config.attach(bleed = 0.0, "snesfilter.ntsc.bleed");
config.attach(mergeFields = true, "snesfilter.ntsc.mergeFields");
}
void NTSCFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
outwidth = SNES_NTSC_OUT_WIDTH(256);
outheight = height;
}
void NTSCFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
if(!ntsc) return;
pitch >>= 1;
outpitch >>= 2;
if(width <= 256) {
snes_ntsc_blit (ntsc, input, pitch, burst, width, height, output, outpitch << 2);
} else {
snes_ntsc_blit_hires(ntsc, input, pitch, burst, width, height, output, outpitch << 2);
}
burst ^= burst_toggle;
}
QWidget* NTSCFilter::settings() {
if(!widget) {
widget = new QWidget;
widget->setWindowTitle("NTSC Filter Configuration");
layout = new QVBoxLayout;
layout->setAlignment(Qt::AlignTop);
widget->setLayout(layout);
gridLayout = new QGridLayout;
layout->addLayout(gridLayout);
basicSettings = new QLabel("<b>Basic settings:</b>");
gridLayout->addWidget(basicSettings, 0, 0, 1, 3);
hueLabel = new QLabel("Hue:");
gridLayout->addWidget(hueLabel, 1, 0);
hueValue = new QLabel;
hueValue->setMinimumWidth(hueValue->fontMetrics().width("-100.0"));
hueValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(hueValue, 1, 1);
hueSlider = new QSlider(Qt::Horizontal);
hueSlider->setMinimum(-100);
hueSlider->setMaximum(+100);
gridLayout->addWidget(hueSlider, 1, 2);
saturationLabel = new QLabel("Saturation:");
gridLayout->addWidget(saturationLabel, 2, 0);
saturationValue = new QLabel;
saturationValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(saturationValue, 2, 1);
saturationSlider = new QSlider(Qt::Horizontal);
saturationSlider->setMinimum(-100);
saturationSlider->setMaximum(+100);
gridLayout->addWidget(saturationSlider, 2, 2);
contrastLabel = new QLabel("Contrast:");
gridLayout->addWidget(contrastLabel, 3, 0);
contrastValue = new QLabel;
contrastValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(contrastValue, 3, 1);
contrastSlider = new QSlider(Qt::Horizontal);
contrastSlider->setMinimum(-100);
contrastSlider->setMaximum(+100);
gridLayout->addWidget(contrastSlider, 3, 2);
brightnessLabel = new QLabel("Brightness:");
gridLayout->addWidget(brightnessLabel, 4, 0);
brightnessValue = new QLabel;
brightnessValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(brightnessValue, 4, 1);
brightnessSlider = new QSlider(Qt::Horizontal);
brightnessSlider->setMinimum(-100);
brightnessSlider->setMaximum(+100);
gridLayout->addWidget(brightnessSlider, 4, 2);
sharpnessLabel = new QLabel("Sharpness:");
gridLayout->addWidget(sharpnessLabel, 5, 0);
sharpnessValue = new QLabel;
sharpnessValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(sharpnessValue, 5, 1);
sharpnessSlider = new QSlider(Qt::Horizontal);
sharpnessSlider->setMinimum(-100);
sharpnessSlider->setMaximum(+100);
gridLayout->addWidget(sharpnessSlider, 5, 2);
advancedSettings = new QLabel("<b>Advanced settings:</b>");
gridLayout->addWidget(advancedSettings, 6, 0, 1, 3);
gammaLabel = new QLabel("Gamma:");
gridLayout->addWidget(gammaLabel, 7, 0);
gammaValue = new QLabel;
gammaValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(gammaValue, 7, 1);
gammaSlider = new QSlider(Qt::Horizontal);
gammaSlider->setMinimum(-100);
gammaSlider->setMaximum(+100);
gridLayout->addWidget(gammaSlider, 7, 2);
resolutionLabel = new QLabel("Resolution:");
gridLayout->addWidget(resolutionLabel, 8, 0);
resolutionValue = new QLabel;
resolutionValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(resolutionValue, 8, 1);
resolutionSlider = new QSlider(Qt::Horizontal);
resolutionSlider->setMinimum(-100);
resolutionSlider->setMaximum(+100);
gridLayout->addWidget(resolutionSlider, 8, 2);
artifactsLabel = new QLabel("Artifacts:");
gridLayout->addWidget(artifactsLabel, 9, 0);
artifactsValue = new QLabel;
artifactsValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(artifactsValue, 9, 1);
artifactsSlider = new QSlider(Qt::Horizontal);
artifactsSlider->setMinimum(-100);
artifactsSlider->setMaximum(+100);
gridLayout->addWidget(artifactsSlider, 9, 2);
fringingLabel = new QLabel("Fringing:");
gridLayout->addWidget(fringingLabel, 10, 0);
fringingValue = new QLabel;
fringingValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(fringingValue, 10, 1);
fringingSlider = new QSlider(Qt::Horizontal);
fringingSlider->setMinimum(-100);
fringingSlider->setMaximum(+100);
gridLayout->addWidget(fringingSlider, 10, 2);
bleedLabel = new QLabel("Color bleed:");
gridLayout->addWidget(bleedLabel, 11, 0);
bleedValue = new QLabel;
bleedValue->setAlignment(Qt::AlignHCenter);
gridLayout->addWidget(bleedValue, 11, 1);
bleedSlider = new QSlider(Qt::Horizontal);
bleedSlider->setMinimum(-100);
bleedSlider->setMaximum(+100);
gridLayout->addWidget(bleedSlider, 11, 2);
mergeFieldsBox = new QCheckBox("Merge even and odd fields to reduce flicker");
gridLayout->addWidget(mergeFieldsBox, 12, 0, 1, 3);
presets = new QLabel("<b>Presets:</b>");
gridLayout->addWidget(presets, 13, 0, 1, 3);
controlLayout = new QHBoxLayout;
layout->addLayout(controlLayout);
rfPreset = new QPushButton("RF");
controlLayout->addWidget(rfPreset);
compositePreset = new QPushButton("Composite");
controlLayout->addWidget(compositePreset);
svideoPreset = new QPushButton("S-Video");
controlLayout->addWidget(svideoPreset);
rgbPreset = new QPushButton("RGB");
controlLayout->addWidget(rgbPreset);
monoPreset = new QPushButton("Monochrome");
controlLayout->addWidget(monoPreset);
spacer = new QWidget;
spacer->setSizePolicy(QSizePolicy::Expanding, QSizePolicy::Fixed);
spacer->setMinimumWidth(50);
controlLayout->addWidget(spacer);
ok = new QPushButton("Ok");
controlLayout->addWidget(ok);
blockSignals = true;
loadSettingsFromConfig();
syncUiToSettings();
initialize();
connect(hueSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(saturationSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(contrastSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(brightnessSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(sharpnessSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(gammaSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(resolutionSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(artifactsSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(fringingSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(bleedSlider, SIGNAL(valueChanged(int)), this, SLOT(syncSettingsToUi()));
connect(mergeFieldsBox, SIGNAL(stateChanged(int)), this, SLOT(syncSettingsToUi()));
connect(rfPreset, SIGNAL(released()), this, SLOT(setRfPreset()));
connect(compositePreset, SIGNAL(released()), this, SLOT(setCompositePreset()));
connect(svideoPreset, SIGNAL(released()), this, SLOT(setSvideoPreset()));
connect(rgbPreset, SIGNAL(released()), this, SLOT(setRgbPreset()));
connect(monoPreset, SIGNAL(released()), this, SLOT(setMonoPreset()));
connect(ok, SIGNAL(released()), widget, SLOT(hide()));
blockSignals = false;
}
return widget;
}
void NTSCFilter::initialize() {
burst = 0;
burst_toggle = (setup.merge_fields ? 0 : 1); //don't toggle burst when fields are merged
snes_ntsc_init(ntsc, &setup);
}
void NTSCFilter::loadSettingsFromConfig() {
setup.hue = hue;
setup.saturation = saturation;
setup.contrast = contrast;
setup.brightness = brightness;
setup.sharpness = sharpness;
setup.gamma = gamma;
setup.resolution = resolution;
setup.artifacts = artifacts;
setup.fringing = fringing;
setup.bleed = bleed;
setup.merge_fields = mergeFields;
}
void NTSCFilter::syncUiToSettings() {
blockSignals = true;
hue = setup.hue;
saturation = setup.saturation;
contrast = setup.contrast;
brightness = setup.brightness;
sharpness = setup.sharpness;
gamma = setup.gamma;
resolution = setup.resolution;
artifacts = setup.artifacts;
fringing = setup.fringing;
bleed = setup.bleed;
mergeFields = setup.merge_fields;
hueValue->setText(string() << hue);
hueSlider->setSliderPosition(hue * 100);
saturationValue->setText(string() << saturation);
saturationSlider->setSliderPosition(saturation * 100);
contrastValue->setText(string() << contrast);
contrastSlider->setSliderPosition(contrast * 100);
brightnessValue->setText(string() << brightness);
brightnessSlider->setSliderPosition(brightness * 100);
sharpnessValue->setText(string() << sharpness);
sharpnessSlider->setSliderPosition(sharpness * 100);
gammaValue->setText(string() << gamma);
gammaSlider->setSliderPosition(gamma * 100);
resolutionValue->setText(string() << resolution);
resolutionSlider->setSliderPosition(resolution * 100);
artifactsValue->setText(string() << artifacts);
artifactsSlider->setSliderPosition(artifacts * 100);
fringingValue->setText(string() << fringing);
fringingSlider->setSliderPosition(fringing * 100);
bleedValue->setText(string() << bleed);
bleedSlider->setSliderPosition(bleed * 100);
mergeFieldsBox->setChecked(mergeFields);
blockSignals = false;
}
void NTSCFilter::syncSettingsToUi() {
if(blockSignals) return;
hue = hueSlider->sliderPosition() / 100.0;
saturation = saturationSlider->sliderPosition() / 100.0;
contrast = contrastSlider->sliderPosition() / 100.0;
brightness = brightnessSlider->sliderPosition() / 100.0;
sharpness = sharpnessSlider->sliderPosition() / 100.0;
gamma = gammaSlider->sliderPosition() / 100.0;
resolution = resolutionSlider->sliderPosition() / 100.0;
artifacts = artifactsSlider->sliderPosition() / 100.0;
fringing = fringingSlider->sliderPosition() / 100.0;
bleed = bleedSlider->sliderPosition() / 100.0;
mergeFields = mergeFieldsBox->isChecked();
loadSettingsFromConfig();
syncUiToSettings();
initialize();
}
void NTSCFilter::setRfPreset() {
static snes_ntsc_setup_t defaults;
setup = defaults;
syncUiToSettings();
initialize();
}
void NTSCFilter::setCompositePreset() {
setup = snes_ntsc_composite;
syncUiToSettings();
initialize();
}
void NTSCFilter::setSvideoPreset() {
setup = snes_ntsc_svideo;
syncUiToSettings();
initialize();
}
void NTSCFilter::setRgbPreset() {
setup = snes_ntsc_rgb;
syncUiToSettings();
initialize();
}
void NTSCFilter::setMonoPreset() {
setup = snes_ntsc_monochrome;
syncUiToSettings();
initialize();
}
NTSCFilter::NTSCFilter() : widget(0) {
ntsc = (snes_ntsc_t*)malloc(sizeof *ntsc);
static snes_ntsc_setup_t defaults;
setup = defaults;
initialize();
}
NTSCFilter::~NTSCFilter() {
if(ntsc) free(ntsc);
}

View File

@@ -0,0 +1,91 @@
class NTSCFilter : public QObject {
Q_OBJECT
public:
void bind(configuration&);
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
QWidget* settings();
NTSCFilter();
~NTSCFilter();
private:
void initialize();
void loadSettingsFromConfig();
void syncUiToSettings();
private slots:
void syncSettingsToUi();
void setRfPreset();
void setCompositePreset();
void setSvideoPreset();
void setRgbPreset();
void setMonoPreset();
private:
QWidget *widget;
QVBoxLayout *layout;
QGridLayout *gridLayout;
QLabel *basicSettings;
QLabel *hueLabel;
QLabel *hueValue;
QSlider *hueSlider;
QLabel *saturationLabel;
QLabel *saturationValue;
QSlider *saturationSlider;
QLabel *contrastLabel;
QLabel *contrastValue;
QSlider *contrastSlider;
QLabel *brightnessLabel;
QLabel *brightnessValue;
QSlider *brightnessSlider;
QLabel *sharpnessLabel;
QLabel *sharpnessValue;
QSlider *sharpnessSlider;
QLabel *advancedSettings;
QLabel *gammaLabel;
QLabel *gammaValue;
QSlider *gammaSlider;
QLabel *resolutionLabel;
QLabel *resolutionValue;
QSlider *resolutionSlider;
QLabel *artifactsLabel;
QLabel *artifactsValue;
QSlider *artifactsSlider;
QLabel *fringingLabel;
QLabel *fringingValue;
QSlider *fringingSlider;
QLabel *bleedLabel;
QLabel *bleedValue;
QSlider *bleedSlider;
QCheckBox *mergeFieldsBox;
QLabel *presets;
QHBoxLayout *controlLayout;
QPushButton *rfPreset;
QPushButton *compositePreset;
QPushButton *svideoPreset;
QPushButton *rgbPreset;
QPushButton *monoPreset;
QWidget *spacer;
QPushButton *ok;
bool blockSignals;
struct snes_ntsc_t *ntsc;
snes_ntsc_setup_t setup;
int burst, burst_toggle;
//settings
double hue;
double saturation;
double contrast;
double brightness;
double sharpness;
double gamma;
double resolution;
double artifacts;
double fringing;
double bleed;
bool mergeFields;
} filter_ntsc;

View File

@@ -1,251 +1,251 @@
/* snes_ntsc 0.2.2. http://www.slack.net/~ant/ */
#include "snes_ntsc.h"
/* Copyright (C) 2006-2007 Shay Green. This module is free software; you
can redistribute it and/or modify it under the terms of the GNU Lesser
General Public License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version. This
module is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
details. You should have received a copy of the GNU Lesser General Public
License along with this module; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
snes_ntsc_setup_t const snes_ntsc_monochrome = { 0,-1, 0, 0,.2, 0,.2,-.2,-.2,-1, 1, 0, 0 };
snes_ntsc_setup_t const snes_ntsc_composite = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 };
snes_ntsc_setup_t const snes_ntsc_svideo = { 0, 0, 0, 0,.2, 0,.2, -1, -1, 0, 1, 0, 0 };
snes_ntsc_setup_t const snes_ntsc_rgb = { 0, 0, 0, 0,.2, 0,.7, -1, -1,-1, 1, 0, 0 };
#define alignment_count 3
#define burst_count 3
#define rescale_in 8
#define rescale_out 7
#define artifacts_mid 1.0f
#define fringing_mid 1.0f
#define std_decoder_hue 0
#define rgb_bits 7 /* half normal range to allow for doubled hires pixels */
#define gamma_size 32
#include "snes_ntsc_impl.h"
/* 3 input pixels -> 8 composite samples */
pixel_info_t const snes_ntsc_pixels [alignment_count] = {
{ PIXEL_OFFSET( -4, -9 ), { 1, 1, .6667f, 0 } },
{ PIXEL_OFFSET( -2, -7 ), { .3333f, 1, 1, .3333f } },
{ PIXEL_OFFSET( 0, -5 ), { 0, .6667f, 1, 1 } },
};
static void merge_kernel_fields( snes_ntsc_rgb_t* io )
{
int n;
for ( n = burst_size; n; --n )
{
snes_ntsc_rgb_t p0 = io [burst_size * 0] + rgb_bias;
snes_ntsc_rgb_t p1 = io [burst_size * 1] + rgb_bias;
snes_ntsc_rgb_t p2 = io [burst_size * 2] + rgb_bias;
/* merge colors without losing precision */
io [burst_size * 0] =
((p0 + p1 - ((p0 ^ p1) & snes_ntsc_rgb_builder)) >> 1) - rgb_bias;
io [burst_size * 1] =
((p1 + p2 - ((p1 ^ p2) & snes_ntsc_rgb_builder)) >> 1) - rgb_bias;
io [burst_size * 2] =
((p2 + p0 - ((p2 ^ p0) & snes_ntsc_rgb_builder)) >> 1) - rgb_bias;
++io;
}
}
static void correct_errors( snes_ntsc_rgb_t color, snes_ntsc_rgb_t* out )
{
int n;
for ( n = burst_count; n; --n )
{
unsigned i;
for ( i = 0; i < rgb_kernel_size / 2; i++ )
{
snes_ntsc_rgb_t error = color -
out [i ] - out [(i+12)%14+14] - out [(i+10)%14+28] -
out [i + 7] - out [i + 5 +14] - out [i + 3 +28];
DISTRIBUTE_ERROR( i+3+28, i+5+14, i+7 );
}
out += alignment_count * rgb_kernel_size;
}
}
void snes_ntsc_init( snes_ntsc_t* ntsc, snes_ntsc_setup_t const* setup )
{
int merge_fields;
int entry;
init_t impl;
if ( !setup )
setup = &snes_ntsc_composite;
init( &impl, setup );
merge_fields = setup->merge_fields;
if ( setup->artifacts <= -1 && setup->fringing <= -1 )
merge_fields = 1;
for ( entry = 0; entry < snes_ntsc_palette_size; entry++ )
{
/* Reduce number of significant bits of source color. Clearing the
low bits of R and B were least notictable. Modifying green was too
noticeable. */
int ir = entry >> 8 & 0x1E;
int ig = entry >> 4 & 0x1F;
int ib = entry << 1 & 0x1E;
#if SNES_NTSC_BSNES_COLORTBL
if ( setup->bsnes_colortbl )
{
int bgr15 = (ib << 10) | (ig << 5) | ir;
unsigned long rgb16 = setup->bsnes_colortbl [bgr15];
ir = rgb16 >> 11 & 0x1E;
ig = rgb16 >> 6 & 0x1F;
ib = rgb16 & 0x1E;
}
#endif
{
float rr = impl.to_float [ir];
float gg = impl.to_float [ig];
float bb = impl.to_float [ib];
float y, i, q = RGB_TO_YIQ( rr, gg, bb, y, i );
int r, g, b = YIQ_TO_RGB( y, i, q, impl.to_rgb, int, r, g );
snes_ntsc_rgb_t rgb = PACK_RGB( r, g, b );
snes_ntsc_rgb_t* out = ntsc->table [entry];
gen_kernel( &impl, y, i, q, out );
if ( merge_fields )
merge_kernel_fields( out );
correct_errors( rgb, out );
}
}
}
#ifndef SNES_NTSC_NO_BLITTERS
void snes_ntsc_blit( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input, long in_row_width,
int burst_phase, int in_width, int in_height, void* rgb_out, long out_pitch )
{
int chunk_count = (in_width - 1) / snes_ntsc_in_chunk;
for ( ; in_height; --in_height )
{
SNES_NTSC_IN_T const* line_in = input;
SNES_NTSC_BEGIN_ROW( ntsc, burst_phase,
snes_ntsc_black, snes_ntsc_black, SNES_NTSC_ADJ_IN( *line_in ) );
snes_ntsc_out_t* restrict line_out = (snes_ntsc_out_t*) rgb_out;
int n;
++line_in;
for ( n = chunk_count; n; --n )
{
/* order of input and output pixels must not be altered */
SNES_NTSC_COLOR_IN( 0, SNES_NTSC_ADJ_IN( line_in [0] ) );
SNES_NTSC_RGB_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, SNES_NTSC_ADJ_IN( line_in [1] ) );
SNES_NTSC_RGB_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, SNES_NTSC_ADJ_IN( line_in [2] ) );
SNES_NTSC_RGB_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
line_in += 3;
line_out += 7;
}
/* finish final pixels */
SNES_NTSC_COLOR_IN( 0, snes_ntsc_black );
SNES_NTSC_RGB_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, snes_ntsc_black );
SNES_NTSC_RGB_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, snes_ntsc_black );
SNES_NTSC_RGB_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
burst_phase = (burst_phase + 1) % snes_ntsc_burst_count;
input += in_row_width;
rgb_out = (char*) rgb_out + out_pitch;
}
}
void snes_ntsc_blit_hires( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input, long in_row_width,
int burst_phase, int in_width, int in_height, void* rgb_out, long out_pitch )
{
int chunk_count = (in_width - 2) / (snes_ntsc_in_chunk * 2);
for ( ; in_height; --in_height )
{
SNES_NTSC_IN_T const* line_in = input;
SNES_NTSC_HIRES_ROW( ntsc, burst_phase,
snes_ntsc_black, snes_ntsc_black, snes_ntsc_black,
SNES_NTSC_ADJ_IN( line_in [0] ),
SNES_NTSC_ADJ_IN( line_in [1] ) );
snes_ntsc_out_t* restrict line_out = (snes_ntsc_out_t*) rgb_out;
int n;
line_in += 2;
for ( n = chunk_count; n; --n )
{
/* twice as many input pixels per chunk */
SNES_NTSC_COLOR_IN( 0, SNES_NTSC_ADJ_IN( line_in [0] ) );
SNES_NTSC_HIRES_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, SNES_NTSC_ADJ_IN( line_in [1] ) );
SNES_NTSC_HIRES_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, SNES_NTSC_ADJ_IN( line_in [2] ) );
SNES_NTSC_HIRES_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 3, SNES_NTSC_ADJ_IN( line_in [3] ) );
SNES_NTSC_HIRES_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 4, SNES_NTSC_ADJ_IN( line_in [4] ) );
SNES_NTSC_HIRES_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 5, SNES_NTSC_ADJ_IN( line_in [5] ) );
SNES_NTSC_HIRES_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_HIRES_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
line_in += 6;
line_out += 7;
}
SNES_NTSC_COLOR_IN( 0, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 3, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 4, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 5, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_HIRES_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
burst_phase = (burst_phase + 1) % snes_ntsc_burst_count;
input += in_row_width;
rgb_out = (char*) rgb_out + out_pitch;
}
}
#endif
/* snes_ntsc 0.2.2. http://www.slack.net/~ant/ */
#include "snes_ntsc.h"
/* Copyright (C) 2006-2007 Shay Green. This module is free software; you
can redistribute it and/or modify it under the terms of the GNU Lesser
General Public License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version. This
module is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
details. You should have received a copy of the GNU Lesser General Public
License along with this module; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
snes_ntsc_setup_t const snes_ntsc_monochrome = { 0,-1, 0, 0,.2, 0,.2,-.2,-.2,-1, 1, 0, 0 };
snes_ntsc_setup_t const snes_ntsc_composite = { 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 0, 0 };
snes_ntsc_setup_t const snes_ntsc_svideo = { 0, 0, 0, 0,.2, 0,.2, -1, -1, 0, 1, 0, 0 };
snes_ntsc_setup_t const snes_ntsc_rgb = { 0, 0, 0, 0,.2, 0,.7, -1, -1,-1, 1, 0, 0 };
#define alignment_count 3
#define burst_count 3
#define rescale_in 8
#define rescale_out 7
#define artifacts_mid 1.0f
#define fringing_mid 1.0f
#define std_decoder_hue 0
#define rgb_bits 7 /* half normal range to allow for doubled hires pixels */
#define gamma_size 32
#include "snes_ntsc_impl.h"
/* 3 input pixels -> 8 composite samples */
pixel_info_t const snes_ntsc_pixels [alignment_count] = {
{ PIXEL_OFFSET( -4, -9 ), { 1, 1, .6667f, 0 } },
{ PIXEL_OFFSET( -2, -7 ), { .3333f, 1, 1, .3333f } },
{ PIXEL_OFFSET( 0, -5 ), { 0, .6667f, 1, 1 } },
};
static void merge_kernel_fields( snes_ntsc_rgb_t* io )
{
int n;
for ( n = burst_size; n; --n )
{
snes_ntsc_rgb_t p0 = io [burst_size * 0] + rgb_bias;
snes_ntsc_rgb_t p1 = io [burst_size * 1] + rgb_bias;
snes_ntsc_rgb_t p2 = io [burst_size * 2] + rgb_bias;
/* merge colors without losing precision */
io [burst_size * 0] =
((p0 + p1 - ((p0 ^ p1) & snes_ntsc_rgb_builder)) >> 1) - rgb_bias;
io [burst_size * 1] =
((p1 + p2 - ((p1 ^ p2) & snes_ntsc_rgb_builder)) >> 1) - rgb_bias;
io [burst_size * 2] =
((p2 + p0 - ((p2 ^ p0) & snes_ntsc_rgb_builder)) >> 1) - rgb_bias;
++io;
}
}
static void correct_errors( snes_ntsc_rgb_t color, snes_ntsc_rgb_t* out )
{
int n;
for ( n = burst_count; n; --n )
{
unsigned i;
for ( i = 0; i < rgb_kernel_size / 2; i++ )
{
snes_ntsc_rgb_t error = color -
out [i ] - out [(i+12)%14+14] - out [(i+10)%14+28] -
out [i + 7] - out [i + 5 +14] - out [i + 3 +28];
DISTRIBUTE_ERROR( i+3+28, i+5+14, i+7 );
}
out += alignment_count * rgb_kernel_size;
}
}
void snes_ntsc_init( snes_ntsc_t* ntsc, snes_ntsc_setup_t const* setup )
{
int merge_fields;
int entry;
init_t impl;
if ( !setup )
setup = &snes_ntsc_composite;
init( &impl, setup );
merge_fields = setup->merge_fields;
if ( setup->artifacts <= -1 && setup->fringing <= -1 )
merge_fields = 1;
for ( entry = 0; entry < snes_ntsc_palette_size; entry++ )
{
/* Reduce number of significant bits of source color. Clearing the
low bits of R and B were least notictable. Modifying green was too
noticeable. */
int ir = entry >> 8 & 0x1E;
int ig = entry >> 4 & 0x1F;
int ib = entry << 1 & 0x1E;
#if SNES_NTSC_BSNES_COLORTBL
if ( setup->bsnes_colortbl )
{
int bgr15 = (ib << 10) | (ig << 5) | ir;
unsigned long rgb16 = setup->bsnes_colortbl [bgr15];
ir = rgb16 >> 11 & 0x1E;
ig = rgb16 >> 6 & 0x1F;
ib = rgb16 & 0x1E;
}
#endif
{
float rr = impl.to_float [ir];
float gg = impl.to_float [ig];
float bb = impl.to_float [ib];
float y, i, q = RGB_TO_YIQ( rr, gg, bb, y, i );
int r, g, b = YIQ_TO_RGB( y, i, q, impl.to_rgb, int, r, g );
snes_ntsc_rgb_t rgb = PACK_RGB( r, g, b );
snes_ntsc_rgb_t* out = ntsc->table [entry];
gen_kernel( &impl, y, i, q, out );
if ( merge_fields )
merge_kernel_fields( out );
correct_errors( rgb, out );
}
}
}
#ifndef SNES_NTSC_NO_BLITTERS
void snes_ntsc_blit( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input, long in_row_width,
int burst_phase, int in_width, int in_height, void* rgb_out, long out_pitch )
{
int chunk_count = (in_width - 1) / snes_ntsc_in_chunk;
for ( ; in_height; --in_height )
{
SNES_NTSC_IN_T const* line_in = input;
SNES_NTSC_BEGIN_ROW( ntsc, burst_phase,
snes_ntsc_black, snes_ntsc_black, SNES_NTSC_ADJ_IN( *line_in ) );
snes_ntsc_out_t* restrict line_out = (snes_ntsc_out_t*) rgb_out;
int n;
++line_in;
for ( n = chunk_count; n; --n )
{
/* order of input and output pixels must not be altered */
SNES_NTSC_COLOR_IN( 0, SNES_NTSC_ADJ_IN( line_in [0] ) );
SNES_NTSC_RGB_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, SNES_NTSC_ADJ_IN( line_in [1] ) );
SNES_NTSC_RGB_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, SNES_NTSC_ADJ_IN( line_in [2] ) );
SNES_NTSC_RGB_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
line_in += 3;
line_out += 7;
}
/* finish final pixels */
SNES_NTSC_COLOR_IN( 0, snes_ntsc_black );
SNES_NTSC_RGB_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, snes_ntsc_black );
SNES_NTSC_RGB_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, snes_ntsc_black );
SNES_NTSC_RGB_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_RGB_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
burst_phase = (burst_phase + 1) % snes_ntsc_burst_count;
input += in_row_width;
rgb_out = (char*) rgb_out + out_pitch;
}
}
void snes_ntsc_blit_hires( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input, long in_row_width,
int burst_phase, int in_width, int in_height, void* rgb_out, long out_pitch )
{
int chunk_count = (in_width - 2) / (snes_ntsc_in_chunk * 2);
for ( ; in_height; --in_height )
{
SNES_NTSC_IN_T const* line_in = input;
SNES_NTSC_HIRES_ROW( ntsc, burst_phase,
snes_ntsc_black, snes_ntsc_black, snes_ntsc_black,
SNES_NTSC_ADJ_IN( line_in [0] ),
SNES_NTSC_ADJ_IN( line_in [1] ) );
snes_ntsc_out_t* restrict line_out = (snes_ntsc_out_t*) rgb_out;
int n;
line_in += 2;
for ( n = chunk_count; n; --n )
{
/* twice as many input pixels per chunk */
SNES_NTSC_COLOR_IN( 0, SNES_NTSC_ADJ_IN( line_in [0] ) );
SNES_NTSC_HIRES_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, SNES_NTSC_ADJ_IN( line_in [1] ) );
SNES_NTSC_HIRES_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, SNES_NTSC_ADJ_IN( line_in [2] ) );
SNES_NTSC_HIRES_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 3, SNES_NTSC_ADJ_IN( line_in [3] ) );
SNES_NTSC_HIRES_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 4, SNES_NTSC_ADJ_IN( line_in [4] ) );
SNES_NTSC_HIRES_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 5, SNES_NTSC_ADJ_IN( line_in [5] ) );
SNES_NTSC_HIRES_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_HIRES_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
line_in += 6;
line_out += 7;
}
SNES_NTSC_COLOR_IN( 0, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 0, line_out [0], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 1, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 1, line_out [1], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 2, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 2, line_out [2], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 3, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 3, line_out [3], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 4, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 4, line_out [4], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_COLOR_IN( 5, snes_ntsc_black );
SNES_NTSC_HIRES_OUT( 5, line_out [5], SNES_NTSC_OUT_DEPTH );
SNES_NTSC_HIRES_OUT( 6, line_out [6], SNES_NTSC_OUT_DEPTH );
burst_phase = (burst_phase + 1) % snes_ntsc_burst_count;
input += in_row_width;
rgb_out = (char*) rgb_out + out_pitch;
}
}
#endif

View File

@@ -1,228 +1,228 @@
/* SNES NTSC video filter */
/* snes_ntsc 0.2.2 */
#ifndef SNES_NTSC_H
#define SNES_NTSC_H
#include "snes_ntsc_config.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Image parameters, ranging from -1.0 to 1.0. Actual internal values shown
in parenthesis and should remain fairly stable in future versions. */
typedef struct snes_ntsc_setup_t
{
/* Basic parameters */
double hue; /* -1 = -180 degrees +1 = +180 degrees */
double saturation; /* -1 = grayscale (0.0) +1 = oversaturated colors (2.0) */
double contrast; /* -1 = dark (0.5) +1 = light (1.5) */
double brightness; /* -1 = dark (0.5) +1 = light (1.5) */
double sharpness; /* edge contrast enhancement/blurring */
/* Advanced parameters */
double gamma; /* -1 = dark (1.5) +1 = light (0.5) */
double resolution; /* image resolution */
double artifacts; /* artifacts caused by color changes */
double fringing; /* color artifacts caused by brightness changes */
double bleed; /* color bleed (color resolution reduction) */
int merge_fields; /* if 1, merges even and odd fields together to reduce flicker */
float const* decoder_matrix; /* optional RGB decoder matrix, 6 elements */
unsigned long const* bsnes_colortbl; /* undocumented; set to 0 */
} snes_ntsc_setup_t;
/* Video format presets */
extern snes_ntsc_setup_t const snes_ntsc_composite; /* color bleeding + artifacts */
extern snes_ntsc_setup_t const snes_ntsc_svideo; /* color bleeding only */
extern snes_ntsc_setup_t const snes_ntsc_rgb; /* crisp image */
extern snes_ntsc_setup_t const snes_ntsc_monochrome;/* desaturated + artifacts */
/* Initializes and adjusts parameters. Can be called multiple times on the same
snes_ntsc_t object. Can pass NULL for either parameter. */
typedef struct snes_ntsc_t snes_ntsc_t;
void snes_ntsc_init( snes_ntsc_t* ntsc, snes_ntsc_setup_t const* setup );
/* Filters one or more rows of pixels. Input pixel format is set by SNES_NTSC_IN_FORMAT
and output RGB depth is set by SNES_NTSC_OUT_DEPTH. Both default to 16-bit RGB.
In_row_width is the number of pixels to get to the next input row. Out_pitch
is the number of *bytes* to get to the next output row. */
void snes_ntsc_blit( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input,
long in_row_width, int burst_phase, int in_width, int in_height,
void* rgb_out, long out_pitch );
void snes_ntsc_blit_hires( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input,
long in_row_width, int burst_phase, int in_width, int in_height,
void* rgb_out, long out_pitch );
/* Number of output pixels written by low-res blitter for given input width. Width
might be rounded down slightly; use SNES_NTSC_IN_WIDTH() on result to find rounded
value. Guaranteed not to round 256 down at all. */
#define SNES_NTSC_OUT_WIDTH( in_width ) \
((((in_width) - 1) / snes_ntsc_in_chunk + 1) * snes_ntsc_out_chunk)
/* Number of low-res input pixels that will fit within given output width. Might be
rounded down slightly; use SNES_NTSC_OUT_WIDTH() on result to find rounded
value. */
#define SNES_NTSC_IN_WIDTH( out_width ) \
(((out_width) / snes_ntsc_out_chunk - 1) * snes_ntsc_in_chunk + 1)
/* Interface for user-defined custom blitters */
enum { snes_ntsc_in_chunk = 3 }; /* number of input pixels read per chunk */
enum { snes_ntsc_out_chunk = 7 }; /* number of output pixels generated per chunk */
enum { snes_ntsc_black = 0 }; /* palette index for black */
enum { snes_ntsc_burst_count = 3 }; /* burst phase cycles through 0, 1, and 2 */
/* Begins outputting row and starts three pixels. First pixel will be cut off a bit.
Use snes_ntsc_black for unused pixels. Declares variables, so must be before first
statement in a block (unless you're using C++). */
#define SNES_NTSC_BEGIN_ROW( ntsc, burst, pixel0, pixel1, pixel2 ) \
char const* ktable = \
(char const*) (ntsc)->table + burst * (snes_ntsc_burst_size * sizeof (snes_ntsc_rgb_t));\
SNES_NTSC_BEGIN_ROW_6_( pixel0, pixel1, pixel2, SNES_NTSC_IN_FORMAT, ktable )
/* Begins input pixel */
#define SNES_NTSC_COLOR_IN( index, color ) \
SNES_NTSC_COLOR_IN_( index, color, SNES_NTSC_IN_FORMAT, ktable )
/* Generates output pixel. Bits can be 24, 16, 15, 14, 32 (treated as 24), or 0:
24: RRRRRRRR GGGGGGGG BBBBBBBB (8-8-8 RGB)
16: RRRRRGGG GGGBBBBB (5-6-5 RGB)
15: RRRRRGG GGGBBBBB (5-5-5 RGB)
14: BBBBBGG GGGRRRRR (5-5-5 BGR, native SNES format)
0: xxxRRRRR RRRxxGGG GGGGGxxB BBBBBBBx (native internal format; x = junk bits) */
#define SNES_NTSC_RGB_OUT( index, rgb_out, bits ) \
SNES_NTSC_RGB_OUT_14_( index, rgb_out, bits, 1 )
/* Hires equivalents */
#define SNES_NTSC_HIRES_ROW( ntsc, burst, pixel1, pixel2, pixel3, pixel4, pixel5 ) \
char const* ktable = \
(char const*) (ntsc)->table + burst * (snes_ntsc_burst_size * sizeof (snes_ntsc_rgb_t));\
unsigned const snes_ntsc_pixel1_ = (pixel1);\
snes_ntsc_rgb_t const* kernel1 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel1_ );\
unsigned const snes_ntsc_pixel2_ = (pixel2);\
snes_ntsc_rgb_t const* kernel2 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel2_ );\
unsigned const snes_ntsc_pixel3_ = (pixel3);\
snes_ntsc_rgb_t const* kernel3 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel3_ );\
unsigned const snes_ntsc_pixel4_ = (pixel4);\
snes_ntsc_rgb_t const* kernel4 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel4_ );\
unsigned const snes_ntsc_pixel5_ = (pixel5);\
snes_ntsc_rgb_t const* kernel5 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel5_ );\
snes_ntsc_rgb_t const* kernel0 = kernel1;\
snes_ntsc_rgb_t const* kernelx0;\
snes_ntsc_rgb_t const* kernelx1 = kernel1;\
snes_ntsc_rgb_t const* kernelx2 = kernel1;\
snes_ntsc_rgb_t const* kernelx3 = kernel1;\
snes_ntsc_rgb_t const* kernelx4 = kernel1;\
snes_ntsc_rgb_t const* kernelx5 = kernel1
#define SNES_NTSC_HIRES_OUT( x, rgb_out, bits ) {\
snes_ntsc_rgb_t raw_ =\
kernel0 [ x ] + kernel2 [(x+5)%7+14] + kernel4 [(x+3)%7+28] +\
kernelx0 [(x+7)%7+7] + kernelx2 [(x+5)%7+21] + kernelx4 [(x+3)%7+35] +\
kernel1 [(x+6)%7 ] + kernel3 [(x+4)%7+14] + kernel5 [(x+2)%7+28] +\
kernelx1 [(x+6)%7+7] + kernelx3 [(x+4)%7+21] + kernelx5 [(x+2)%7+35];\
SNES_NTSC_CLAMP_( raw_, 0 );\
SNES_NTSC_RGB_OUT_( rgb_out, (bits), 0 );\
}
/* private */
enum { snes_ntsc_entry_size = 128 };
enum { snes_ntsc_palette_size = 0x2000 };
typedef unsigned long snes_ntsc_rgb_t;
struct snes_ntsc_t {
snes_ntsc_rgb_t table [snes_ntsc_palette_size] [snes_ntsc_entry_size];
};
enum { snes_ntsc_burst_size = snes_ntsc_entry_size / snes_ntsc_burst_count };
#define SNES_NTSC_RGB16( ktable, n ) \
(snes_ntsc_rgb_t const*) (ktable + ((n & 0x001E) | (n >> 1 & 0x03E0) | (n >> 2 & 0x3C00)) * \
(snes_ntsc_entry_size / 2 * sizeof (snes_ntsc_rgb_t)))
#define SNES_NTSC_BGR15( ktable, n ) \
(snes_ntsc_rgb_t const*) (ktable + ((n << 9 & 0x3C00) | (n & 0x03E0) | (n >> 10 & 0x001E)) * \
(snes_ntsc_entry_size / 2 * sizeof (snes_ntsc_rgb_t)))
/* common 3->7 ntsc macros */
#define SNES_NTSC_BEGIN_ROW_6_( pixel0, pixel1, pixel2, ENTRY, table ) \
unsigned const snes_ntsc_pixel0_ = (pixel0);\
snes_ntsc_rgb_t const* kernel0 = ENTRY( table, snes_ntsc_pixel0_ );\
unsigned const snes_ntsc_pixel1_ = (pixel1);\
snes_ntsc_rgb_t const* kernel1 = ENTRY( table, snes_ntsc_pixel1_ );\
unsigned const snes_ntsc_pixel2_ = (pixel2);\
snes_ntsc_rgb_t const* kernel2 = ENTRY( table, snes_ntsc_pixel2_ );\
snes_ntsc_rgb_t const* kernelx0;\
snes_ntsc_rgb_t const* kernelx1 = kernel0;\
snes_ntsc_rgb_t const* kernelx2 = kernel0
#define SNES_NTSC_RGB_OUT_14_( x, rgb_out, bits, shift ) {\
snes_ntsc_rgb_t raw_ =\
kernel0 [x ] + kernel1 [(x+12)%7+14] + kernel2 [(x+10)%7+28] +\
kernelx0 [(x+7)%14] + kernelx1 [(x+ 5)%7+21] + kernelx2 [(x+ 3)%7+35];\
SNES_NTSC_CLAMP_( raw_, shift );\
SNES_NTSC_RGB_OUT_( rgb_out, bits, shift );\
}
/* common ntsc macros */
#define snes_ntsc_rgb_builder ((1L << 21) | (1 << 11) | (1 << 1))
#define snes_ntsc_clamp_mask (snes_ntsc_rgb_builder * 3 / 2)
#define snes_ntsc_clamp_add (snes_ntsc_rgb_builder * 0x101)
#define SNES_NTSC_CLAMP_( io, shift ) {\
snes_ntsc_rgb_t sub = (io) >> (9-(shift)) & snes_ntsc_clamp_mask;\
snes_ntsc_rgb_t clamp = snes_ntsc_clamp_add - sub;\
io |= clamp;\
clamp -= sub;\
io &= clamp;\
}
#define SNES_NTSC_COLOR_IN_( index, color, ENTRY, table ) {\
unsigned color_;\
kernelx##index = kernel##index;\
kernel##index = (color_ = (color), ENTRY( table, color_ ));\
}
/* x is always zero except in snes_ntsc library */
/* original routine */
/*
#define SNES_NTSC_RGB_OUT_( rgb_out, bits, x ) {\
if ( bits == 16 )\
rgb_out = (raw_>>(13-x)& 0xF800)|(raw_>>(8-x)&0x07E0)|(raw_>>(4-x)&0x001F);\
if ( bits == 24 || bits == 32 )\
rgb_out = (raw_>>(5-x)&0xFF0000)|(raw_>>(3-x)&0xFF00)|(raw_>>(1-x)&0xFF);\
if ( bits == 15 )\
rgb_out = (raw_>>(14-x)& 0x7C00)|(raw_>>(9-x)&0x03E0)|(raw_>>(4-x)&0x001F);\
if ( bits == 14 )\
rgb_out = (raw_>>(24-x)& 0x001F)|(raw_>>(9-x)&0x03E0)|(raw_<<(6+x)&0x7C00);\
if ( bits == 0 )\
rgb_out = raw_ << x;\
}
*/
/* custom bsnes routine -- hooks into bsnes colortable */
#define SNES_NTSC_RGB_OUT_( rgb_out, bits, x ) {\
if ( bits == 16 ) {\
rgb_out = (raw_>>(13-x)& 0xF800)|(raw_>>(8-x)&0x07E0)|(raw_>>(4-x)&0x001F);\
rgb_out = ((rgb_out&0xf800)>>11)|((rgb_out&0x07c0)>>1)|((rgb_out&0x001f)<<10);\
rgb_out = colortable[rgb_out];\
} else if ( bits == 24 || bits == 32 ) {\
rgb_out = (raw_>>(5-x)&0xFF0000)|(raw_>>(3-x)&0xFF00)|(raw_>>(1-x)&0xFF);\
rgb_out = ((rgb_out&0xf80000)>>19)|((rgb_out&0x00f800)>>6)|((rgb_out&0x0000f8)<<7);\
rgb_out = colortable[rgb_out];\
} else if ( bits == 15 ) {\
rgb_out = (raw_>>(14-x)& 0x7C00)|(raw_>>(9-x)&0x03E0)|(raw_>>(4-x)&0x001F);\
rgb_out = ((rgb_out&0x7c00)>>10)|((rgb_out&0x03e0))|((rgb_out&0x001f)<<10);\
rgb_out = colortable[rgb_out];\
} else {\
rgb_out = raw_ << x;\
}\
}
#ifdef __cplusplus
}
#endif
#endif
/* SNES NTSC video filter */
/* snes_ntsc 0.2.2 */
#ifndef SNES_NTSC_H
#define SNES_NTSC_H
#include "snes_ntsc_config.h"
#ifdef __cplusplus
extern "C" {
#endif
/* Image parameters, ranging from -1.0 to 1.0. Actual internal values shown
in parenthesis and should remain fairly stable in future versions. */
typedef struct snes_ntsc_setup_t
{
/* Basic parameters */
double hue; /* -1 = -180 degrees +1 = +180 degrees */
double saturation; /* -1 = grayscale (0.0) +1 = oversaturated colors (2.0) */
double contrast; /* -1 = dark (0.5) +1 = light (1.5) */
double brightness; /* -1 = dark (0.5) +1 = light (1.5) */
double sharpness; /* edge contrast enhancement/blurring */
/* Advanced parameters */
double gamma; /* -1 = dark (1.5) +1 = light (0.5) */
double resolution; /* image resolution */
double artifacts; /* artifacts caused by color changes */
double fringing; /* color artifacts caused by brightness changes */
double bleed; /* color bleed (color resolution reduction) */
int merge_fields; /* if 1, merges even and odd fields together to reduce flicker */
float const* decoder_matrix; /* optional RGB decoder matrix, 6 elements */
unsigned long const* bsnes_colortbl; /* undocumented; set to 0 */
} snes_ntsc_setup_t;
/* Video format presets */
extern snes_ntsc_setup_t const snes_ntsc_composite; /* color bleeding + artifacts */
extern snes_ntsc_setup_t const snes_ntsc_svideo; /* color bleeding only */
extern snes_ntsc_setup_t const snes_ntsc_rgb; /* crisp image */
extern snes_ntsc_setup_t const snes_ntsc_monochrome;/* desaturated + artifacts */
/* Initializes and adjusts parameters. Can be called multiple times on the same
snes_ntsc_t object. Can pass NULL for either parameter. */
typedef struct snes_ntsc_t snes_ntsc_t;
void snes_ntsc_init( snes_ntsc_t* ntsc, snes_ntsc_setup_t const* setup );
/* Filters one or more rows of pixels. Input pixel format is set by SNES_NTSC_IN_FORMAT
and output RGB depth is set by SNES_NTSC_OUT_DEPTH. Both default to 16-bit RGB.
In_row_width is the number of pixels to get to the next input row. Out_pitch
is the number of *bytes* to get to the next output row. */
void snes_ntsc_blit( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input,
long in_row_width, int burst_phase, int in_width, int in_height,
void* rgb_out, long out_pitch );
void snes_ntsc_blit_hires( snes_ntsc_t const* ntsc, SNES_NTSC_IN_T const* input,
long in_row_width, int burst_phase, int in_width, int in_height,
void* rgb_out, long out_pitch );
/* Number of output pixels written by low-res blitter for given input width. Width
might be rounded down slightly; use SNES_NTSC_IN_WIDTH() on result to find rounded
value. Guaranteed not to round 256 down at all. */
#define SNES_NTSC_OUT_WIDTH( in_width ) \
((((in_width) - 1) / snes_ntsc_in_chunk + 1) * snes_ntsc_out_chunk)
/* Number of low-res input pixels that will fit within given output width. Might be
rounded down slightly; use SNES_NTSC_OUT_WIDTH() on result to find rounded
value. */
#define SNES_NTSC_IN_WIDTH( out_width ) \
(((out_width) / snes_ntsc_out_chunk - 1) * snes_ntsc_in_chunk + 1)
/* Interface for user-defined custom blitters */
enum { snes_ntsc_in_chunk = 3 }; /* number of input pixels read per chunk */
enum { snes_ntsc_out_chunk = 7 }; /* number of output pixels generated per chunk */
enum { snes_ntsc_black = 0 }; /* palette index for black */
enum { snes_ntsc_burst_count = 3 }; /* burst phase cycles through 0, 1, and 2 */
/* Begins outputting row and starts three pixels. First pixel will be cut off a bit.
Use snes_ntsc_black for unused pixels. Declares variables, so must be before first
statement in a block (unless you're using C++). */
#define SNES_NTSC_BEGIN_ROW( ntsc, burst, pixel0, pixel1, pixel2 ) \
char const* ktable = \
(char const*) (ntsc)->table + burst * (snes_ntsc_burst_size * sizeof (snes_ntsc_rgb_t));\
SNES_NTSC_BEGIN_ROW_6_( pixel0, pixel1, pixel2, SNES_NTSC_IN_FORMAT, ktable )
/* Begins input pixel */
#define SNES_NTSC_COLOR_IN( index, color ) \
SNES_NTSC_COLOR_IN_( index, color, SNES_NTSC_IN_FORMAT, ktable )
/* Generates output pixel. Bits can be 24, 16, 15, 14, 32 (treated as 24), or 0:
24: RRRRRRRR GGGGGGGG BBBBBBBB (8-8-8 RGB)
16: RRRRRGGG GGGBBBBB (5-6-5 RGB)
15: RRRRRGG GGGBBBBB (5-5-5 RGB)
14: BBBBBGG GGGRRRRR (5-5-5 BGR, native SNES format)
0: xxxRRRRR RRRxxGGG GGGGGxxB BBBBBBBx (native internal format; x = junk bits) */
#define SNES_NTSC_RGB_OUT( index, rgb_out, bits ) \
SNES_NTSC_RGB_OUT_14_( index, rgb_out, bits, 1 )
/* Hires equivalents */
#define SNES_NTSC_HIRES_ROW( ntsc, burst, pixel1, pixel2, pixel3, pixel4, pixel5 ) \
char const* ktable = \
(char const*) (ntsc)->table + burst * (snes_ntsc_burst_size * sizeof (snes_ntsc_rgb_t));\
unsigned const snes_ntsc_pixel1_ = (pixel1);\
snes_ntsc_rgb_t const* kernel1 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel1_ );\
unsigned const snes_ntsc_pixel2_ = (pixel2);\
snes_ntsc_rgb_t const* kernel2 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel2_ );\
unsigned const snes_ntsc_pixel3_ = (pixel3);\
snes_ntsc_rgb_t const* kernel3 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel3_ );\
unsigned const snes_ntsc_pixel4_ = (pixel4);\
snes_ntsc_rgb_t const* kernel4 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel4_ );\
unsigned const snes_ntsc_pixel5_ = (pixel5);\
snes_ntsc_rgb_t const* kernel5 = SNES_NTSC_IN_FORMAT( ktable, snes_ntsc_pixel5_ );\
snes_ntsc_rgb_t const* kernel0 = kernel1;\
snes_ntsc_rgb_t const* kernelx0;\
snes_ntsc_rgb_t const* kernelx1 = kernel1;\
snes_ntsc_rgb_t const* kernelx2 = kernel1;\
snes_ntsc_rgb_t const* kernelx3 = kernel1;\
snes_ntsc_rgb_t const* kernelx4 = kernel1;\
snes_ntsc_rgb_t const* kernelx5 = kernel1
#define SNES_NTSC_HIRES_OUT( x, rgb_out, bits ) {\
snes_ntsc_rgb_t raw_ =\
kernel0 [ x ] + kernel2 [(x+5)%7+14] + kernel4 [(x+3)%7+28] +\
kernelx0 [(x+7)%7+7] + kernelx2 [(x+5)%7+21] + kernelx4 [(x+3)%7+35] +\
kernel1 [(x+6)%7 ] + kernel3 [(x+4)%7+14] + kernel5 [(x+2)%7+28] +\
kernelx1 [(x+6)%7+7] + kernelx3 [(x+4)%7+21] + kernelx5 [(x+2)%7+35];\
SNES_NTSC_CLAMP_( raw_, 0 );\
SNES_NTSC_RGB_OUT_( rgb_out, (bits), 0 );\
}
/* private */
enum { snes_ntsc_entry_size = 128 };
enum { snes_ntsc_palette_size = 0x2000 };
typedef unsigned long snes_ntsc_rgb_t;
struct snes_ntsc_t {
snes_ntsc_rgb_t table [snes_ntsc_palette_size] [snes_ntsc_entry_size];
};
enum { snes_ntsc_burst_size = snes_ntsc_entry_size / snes_ntsc_burst_count };
#define SNES_NTSC_RGB16( ktable, n ) \
(snes_ntsc_rgb_t const*) (ktable + ((n & 0x001E) | (n >> 1 & 0x03E0) | (n >> 2 & 0x3C00)) * \
(snes_ntsc_entry_size / 2 * sizeof (snes_ntsc_rgb_t)))
#define SNES_NTSC_BGR15( ktable, n ) \
(snes_ntsc_rgb_t const*) (ktable + ((n << 9 & 0x3C00) | (n & 0x03E0) | (n >> 10 & 0x001E)) * \
(snes_ntsc_entry_size / 2 * sizeof (snes_ntsc_rgb_t)))
/* common 3->7 ntsc macros */
#define SNES_NTSC_BEGIN_ROW_6_( pixel0, pixel1, pixel2, ENTRY, table ) \
unsigned const snes_ntsc_pixel0_ = (pixel0);\
snes_ntsc_rgb_t const* kernel0 = ENTRY( table, snes_ntsc_pixel0_ );\
unsigned const snes_ntsc_pixel1_ = (pixel1);\
snes_ntsc_rgb_t const* kernel1 = ENTRY( table, snes_ntsc_pixel1_ );\
unsigned const snes_ntsc_pixel2_ = (pixel2);\
snes_ntsc_rgb_t const* kernel2 = ENTRY( table, snes_ntsc_pixel2_ );\
snes_ntsc_rgb_t const* kernelx0;\
snes_ntsc_rgb_t const* kernelx1 = kernel0;\
snes_ntsc_rgb_t const* kernelx2 = kernel0
#define SNES_NTSC_RGB_OUT_14_( x, rgb_out, bits, shift ) {\
snes_ntsc_rgb_t raw_ =\
kernel0 [x ] + kernel1 [(x+12)%7+14] + kernel2 [(x+10)%7+28] +\
kernelx0 [(x+7)%14] + kernelx1 [(x+ 5)%7+21] + kernelx2 [(x+ 3)%7+35];\
SNES_NTSC_CLAMP_( raw_, shift );\
SNES_NTSC_RGB_OUT_( rgb_out, bits, shift );\
}
/* common ntsc macros */
#define snes_ntsc_rgb_builder ((1L << 21) | (1 << 11) | (1 << 1))
#define snes_ntsc_clamp_mask (snes_ntsc_rgb_builder * 3 / 2)
#define snes_ntsc_clamp_add (snes_ntsc_rgb_builder * 0x101)
#define SNES_NTSC_CLAMP_( io, shift ) {\
snes_ntsc_rgb_t sub = (io) >> (9-(shift)) & snes_ntsc_clamp_mask;\
snes_ntsc_rgb_t clamp = snes_ntsc_clamp_add - sub;\
io |= clamp;\
clamp -= sub;\
io &= clamp;\
}
#define SNES_NTSC_COLOR_IN_( index, color, ENTRY, table ) {\
unsigned color_;\
kernelx##index = kernel##index;\
kernel##index = (color_ = (color), ENTRY( table, color_ ));\
}
/* x is always zero except in snes_ntsc library */
/* original routine */
/*
#define SNES_NTSC_RGB_OUT_( rgb_out, bits, x ) {\
if ( bits == 16 )\
rgb_out = (raw_>>(13-x)& 0xF800)|(raw_>>(8-x)&0x07E0)|(raw_>>(4-x)&0x001F);\
if ( bits == 24 || bits == 32 )\
rgb_out = (raw_>>(5-x)&0xFF0000)|(raw_>>(3-x)&0xFF00)|(raw_>>(1-x)&0xFF);\
if ( bits == 15 )\
rgb_out = (raw_>>(14-x)& 0x7C00)|(raw_>>(9-x)&0x03E0)|(raw_>>(4-x)&0x001F);\
if ( bits == 14 )\
rgb_out = (raw_>>(24-x)& 0x001F)|(raw_>>(9-x)&0x03E0)|(raw_<<(6+x)&0x7C00);\
if ( bits == 0 )\
rgb_out = raw_ << x;\
}
*/
/* custom bsnes routine -- hooks into bsnes colortable */
#define SNES_NTSC_RGB_OUT_( rgb_out, bits, x ) {\
if ( bits == 16 ) {\
rgb_out = (raw_>>(13-x)& 0xF800)|(raw_>>(8-x)&0x07E0)|(raw_>>(4-x)&0x001F);\
rgb_out = ((rgb_out&0xf800)>>11)|((rgb_out&0x07c0)>>1)|((rgb_out&0x001f)<<10);\
rgb_out = colortable[rgb_out];\
} else if ( bits == 24 || bits == 32 ) {\
rgb_out = (raw_>>(5-x)&0xFF0000)|(raw_>>(3-x)&0xFF00)|(raw_>>(1-x)&0xFF);\
rgb_out = ((rgb_out&0xf80000)>>19)|((rgb_out&0x00f800)>>6)|((rgb_out&0x0000f8)<<7);\
rgb_out = colortable[rgb_out];\
} else if ( bits == 15 ) {\
rgb_out = (raw_>>(14-x)& 0x7C00)|(raw_>>(9-x)&0x03E0)|(raw_>>(4-x)&0x001F);\
rgb_out = ((rgb_out&0x7c00)>>10)|((rgb_out&0x03e0))|((rgb_out&0x001f)<<10);\
rgb_out = colortable[rgb_out];\
} else {\
rgb_out = raw_ << x;\
}\
}
#ifdef __cplusplus
}
#endif
#endif

View File

@@ -1,26 +1,26 @@
/* Configure library by modifying this file */
#ifndef SNES_NTSC_CONFIG_H
#define SNES_NTSC_CONFIG_H
/* Format of source pixels */
/* #define SNES_NTSC_IN_FORMAT SNES_NTSC_RGB16 */
#define SNES_NTSC_IN_FORMAT SNES_NTSC_BGR15
/* The following affect the built-in blitter only; a custom blitter can
handle things however it wants. */
/* Bits per pixel of output. Can be 15, 16, 32, or 24 (same as 32). */
#define SNES_NTSC_OUT_DEPTH 32
/* Type of input pixel values */
#define SNES_NTSC_IN_T unsigned short
/* Each raw pixel input value is passed through this. You might want to mask
the pixel index if you use the high bits as flags, etc. */
#define SNES_NTSC_ADJ_IN( in ) in
/* For each pixel, this is the basic operation:
output_color = SNES_NTSC_ADJ_IN( SNES_NTSC_IN_T ) */
#endif
/* Configure library by modifying this file */
#ifndef SNES_NTSC_CONFIG_H
#define SNES_NTSC_CONFIG_H
/* Format of source pixels */
/* #define SNES_NTSC_IN_FORMAT SNES_NTSC_RGB16 */
#define SNES_NTSC_IN_FORMAT SNES_NTSC_BGR15
/* The following affect the built-in blitter only; a custom blitter can
handle things however it wants. */
/* Bits per pixel of output. Can be 15, 16, 32, or 24 (same as 32). */
#define SNES_NTSC_OUT_DEPTH 32
/* Type of input pixel values */
#define SNES_NTSC_IN_T unsigned short
/* Each raw pixel input value is passed through this. You might want to mask
the pixel index if you use the high bits as flags, etc. */
#define SNES_NTSC_ADJ_IN( in ) in
/* For each pixel, this is the basic operation:
output_color = SNES_NTSC_ADJ_IN( SNES_NTSC_IN_T ) */
#endif

View File

@@ -1,439 +1,439 @@
/* snes_ntsc 0.2.2. http://www.slack.net/~ant/ */
/* Common implementation of NTSC filters */
#include <assert.h>
#include <math.h>
/* Copyright (C) 2006 Shay Green. This module is free software; you
can redistribute it and/or modify it under the terms of the GNU Lesser
General Public License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version. This
module is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
details. You should have received a copy of the GNU Lesser General Public
License along with this module; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
#define DISABLE_CORRECTION 0
#undef PI
#define PI 3.14159265358979323846f
#ifndef LUMA_CUTOFF
#define LUMA_CUTOFF 0.20
#endif
#ifndef gamma_size
#define gamma_size 1
#endif
#ifndef rgb_bits
#define rgb_bits 8
#endif
#ifndef artifacts_max
#define artifacts_max (artifacts_mid * 1.5f)
#endif
#ifndef fringing_max
#define fringing_max (fringing_mid * 2)
#endif
#ifndef STD_HUE_CONDITION
#define STD_HUE_CONDITION( setup ) 1
#endif
#define ext_decoder_hue (std_decoder_hue + 15)
#define rgb_unit (1 << rgb_bits)
#define rgb_offset (rgb_unit * 2 + 0.5f)
enum { burst_size = snes_ntsc_entry_size / burst_count };
enum { kernel_half = 16 };
enum { kernel_size = kernel_half * 2 + 1 };
typedef struct init_t
{
float to_rgb [burst_count * 6];
float to_float [gamma_size];
float contrast;
float brightness;
float artifacts;
float fringing;
float kernel [rescale_out * kernel_size * 2];
} init_t;
#define ROTATE_IQ( i, q, sin_b, cos_b ) {\
float t;\
t = i * cos_b - q * sin_b;\
q = i * sin_b + q * cos_b;\
i = t;\
}
static void init_filters( init_t* impl, snes_ntsc_setup_t const* setup )
{
#if rescale_out > 1
float kernels [kernel_size * 2];
#else
float* const kernels = impl->kernel;
#endif
/* generate luma (y) filter using sinc kernel */
{
/* sinc with rolloff (dsf) */
float const rolloff = 1 + (float) setup->sharpness * (float) 0.032;
float const maxh = 32;
float const pow_a_n = (float) pow( rolloff, maxh );
float sum;
int i;
/* quadratic mapping to reduce negative (blurring) range */
float to_angle = (float) setup->resolution + 1;
to_angle = PI / maxh * (float) LUMA_CUTOFF * (to_angle * to_angle + 1);
kernels [kernel_size * 3 / 2] = maxh; /* default center value */
for ( i = 0; i < kernel_half * 2 + 1; i++ )
{
int x = i - kernel_half;
float angle = x * to_angle;
/* instability occurs at center point with rolloff very close to 1.0 */
if ( x || pow_a_n > (float) 1.056 || pow_a_n < (float) 0.981 )
{
float rolloff_cos_a = rolloff * (float) cos( angle );
float num = 1 - rolloff_cos_a -
pow_a_n * (float) cos( maxh * angle ) +
pow_a_n * rolloff * (float) cos( (maxh - 1) * angle );
float den = 1 - rolloff_cos_a - rolloff_cos_a + rolloff * rolloff;
float dsf = num / den;
kernels [kernel_size * 3 / 2 - kernel_half + i] = dsf - (float) 0.5;
}
}
/* apply blackman window and find sum */
sum = 0;
for ( i = 0; i < kernel_half * 2 + 1; i++ )
{
float x = PI * 2 / (kernel_half * 2) * i;
float blackman = 0.42f - 0.5f * (float) cos( x ) + 0.08f * (float) cos( x * 2 );
sum += (kernels [kernel_size * 3 / 2 - kernel_half + i] *= blackman);
}
/* normalize kernel */
sum = 1.0f / sum;
for ( i = 0; i < kernel_half * 2 + 1; i++ )
{
int x = kernel_size * 3 / 2 - kernel_half + i;
kernels [x] *= sum;
assert( kernels [x] == kernels [x] ); /* catch numerical instability */
}
}
/* generate chroma (iq) filter using gaussian kernel */
{
float const cutoff_factor = -0.03125f;
float cutoff = (float) setup->bleed;
int i;
if ( cutoff < 0 )
{
/* keep extreme value accessible only near upper end of scale (1.0) */
cutoff *= cutoff;
cutoff *= cutoff;
cutoff *= cutoff;
cutoff *= -30.0f / 0.65f;
}
cutoff = cutoff_factor - 0.65f * cutoff_factor * cutoff;
for ( i = -kernel_half; i <= kernel_half; i++ )
kernels [kernel_size / 2 + i] = (float) exp( i * i * cutoff );
/* normalize even and odd phases separately */
for ( i = 0; i < 2; i++ )
{
float sum = 0;
int x;
for ( x = i; x < kernel_size; x += 2 )
sum += kernels [x];
sum = 1.0f / sum;
for ( x = i; x < kernel_size; x += 2 )
{
kernels [x] *= sum;
assert( kernels [x] == kernels [x] ); /* catch numerical instability */
}
}
}
/*
printf( "luma:\n" );
for ( i = kernel_size; i < kernel_size * 2; i++ )
printf( "%f\n", kernels [i] );
printf( "chroma:\n" );
for ( i = 0; i < kernel_size; i++ )
printf( "%f\n", kernels [i] );
*/
/* generate linear rescale kernels */
#if rescale_out > 1
{
float weight = 1.0f;
float* out = impl->kernel;
int n = rescale_out;
do
{
float remain = 0;
int i;
weight -= 1.0f / rescale_in;
for ( i = 0; i < kernel_size * 2; i++ )
{
float cur = kernels [i];
float m = cur * weight;
*out++ = m + remain;
remain = cur - m;
}
}
while ( --n );
}
#endif
}
static float const default_decoder [6] =
{ 0.956f, 0.621f, -0.272f, -0.647f, -1.105f, 1.702f };
static void init( init_t* impl, snes_ntsc_setup_t const* setup )
{
impl->brightness = (float) setup->brightness * (0.5f * rgb_unit) + rgb_offset;
impl->contrast = (float) setup->contrast * (0.5f * rgb_unit) + rgb_unit;
#ifdef default_palette_contrast
if ( !setup->palette )
impl->contrast *= default_palette_contrast;
#endif
impl->artifacts = (float) setup->artifacts;
if ( impl->artifacts > 0 )
impl->artifacts *= artifacts_max - artifacts_mid;
impl->artifacts = impl->artifacts * artifacts_mid + artifacts_mid;
impl->fringing = (float) setup->fringing;
if ( impl->fringing > 0 )
impl->fringing *= fringing_max - fringing_mid;
impl->fringing = impl->fringing * fringing_mid + fringing_mid;
init_filters( impl, setup );
/* generate gamma table */
if ( gamma_size > 1 )
{
float const to_float = 1.0f / (gamma_size - (gamma_size > 1));
float const gamma = 1.1333f - (float) setup->gamma * 0.5f;
/* match common PC's 2.2 gamma to TV's 2.65 gamma */
int i;
for ( i = 0; i < gamma_size; i++ )
impl->to_float [i] =
(float) pow( i * to_float, gamma ) * impl->contrast + impl->brightness;
}
/* setup decoder matricies */
{
float hue = (float) setup->hue * PI + PI / 180 * ext_decoder_hue;
float sat = (float) setup->saturation + 1;
float const* decoder = setup->decoder_matrix;
if ( !decoder )
{
decoder = default_decoder;
if ( STD_HUE_CONDITION( setup ) )
hue += PI / 180 * (std_decoder_hue - ext_decoder_hue);
}
{
float s = (float) sin( hue ) * sat;
float c = (float) cos( hue ) * sat;
float* out = impl->to_rgb;
int n;
n = burst_count;
do
{
float const* in = decoder;
int n = 3;
do
{
float i = *in++;
float q = *in++;
*out++ = i * c - q * s;
*out++ = i * s + q * c;
}
while ( --n );
if ( burst_count <= 1 )
break;
ROTATE_IQ( s, c, 0.866025f, -0.5f ); /* +120 degrees */
}
while ( --n );
}
}
}
/* kernel generation */
#define RGB_TO_YIQ( r, g, b, y, i ) (\
(y = (r) * 0.299f + (g) * 0.587f + (b) * 0.114f),\
(i = (r) * 0.596f - (g) * 0.275f - (b) * 0.321f),\
((r) * 0.212f - (g) * 0.523f + (b) * 0.311f)\
)
#define YIQ_TO_RGB( y, i, q, to_rgb, type, r, g ) (\
r = (type) (y + to_rgb [0] * i + to_rgb [1] * q),\
g = (type) (y + to_rgb [2] * i + to_rgb [3] * q),\
(type) (y + to_rgb [4] * i + to_rgb [5] * q)\
)
#define PACK_RGB( r, g, b ) ((r) << 21 | (g) << 11 | (b) << 1)
enum { rgb_kernel_size = burst_size / alignment_count };
enum { rgb_bias = rgb_unit * 2 * snes_ntsc_rgb_builder };
typedef struct pixel_info_t
{
int offset;
float negate;
float kernel [4];
} pixel_info_t;
#if rescale_in > 1
#define PIXEL_OFFSET_( ntsc, scaled ) \
(kernel_size / 2 + ntsc + (scaled != 0) + (rescale_out - scaled) % rescale_out + \
(kernel_size * 2 * scaled))
#define PIXEL_OFFSET( ntsc, scaled ) \
PIXEL_OFFSET_( ((ntsc) - (scaled) / rescale_out * rescale_in),\
(((scaled) + rescale_out * 10) % rescale_out) ),\
(1.0f - (((ntsc) + 100) & 2))
#else
#define PIXEL_OFFSET( ntsc, scaled ) \
(kernel_size / 2 + (ntsc) - (scaled)),\
(1.0f - (((ntsc) + 100) & 2))
#endif
extern pixel_info_t const snes_ntsc_pixels [alignment_count];
/* Generate pixel at all burst phases and column alignments */
static void gen_kernel( init_t* impl, float y, float i, float q, snes_ntsc_rgb_t* out )
{
/* generate for each scanline burst phase */
float const* to_rgb = impl->to_rgb;
int burst_remain = burst_count;
y -= rgb_offset;
do
{
/* Encode yiq into *two* composite signals (to allow control over artifacting).
Convolve these with kernels which: filter respective components, apply
sharpening, and rescale horizontally. Convert resulting yiq to rgb and pack
into integer. Based on algorithm by NewRisingSun. */
pixel_info_t const* pixel = snes_ntsc_pixels;
int alignment_remain = alignment_count;
do
{
/* negate is -1 when composite starts at odd multiple of 2 */
float const yy = y * impl->fringing * pixel->negate;
float const ic0 = (i + yy) * pixel->kernel [0];
float const qc1 = (q + yy) * pixel->kernel [1];
float const ic2 = (i - yy) * pixel->kernel [2];
float const qc3 = (q - yy) * pixel->kernel [3];
float const factor = impl->artifacts * pixel->negate;
float const ii = i * factor;
float const yc0 = (y + ii) * pixel->kernel [0];
float const yc2 = (y - ii) * pixel->kernel [2];
float const qq = q * factor;
float const yc1 = (y + qq) * pixel->kernel [1];
float const yc3 = (y - qq) * pixel->kernel [3];
float const* k = &impl->kernel [pixel->offset];
int n;
++pixel;
for ( n = rgb_kernel_size; n; --n )
{
float i = k[0]*ic0 + k[2]*ic2;
float q = k[1]*qc1 + k[3]*qc3;
float y = k[kernel_size+0]*yc0 + k[kernel_size+1]*yc1 +
k[kernel_size+2]*yc2 + k[kernel_size+3]*yc3 + rgb_offset;
if ( rescale_out <= 1 )
k--;
else if ( k < &impl->kernel [kernel_size * 2 * (rescale_out - 1)] )
k += kernel_size * 2 - 1;
else
k -= kernel_size * 2 * (rescale_out - 1) + 2;
{
int r, g, b = YIQ_TO_RGB( y, i, q, to_rgb, int, r, g );
*out++ = PACK_RGB( r, g, b ) - rgb_bias;
}
}
}
while ( alignment_count > 1 && --alignment_remain );
if ( burst_count <= 1 )
break;
to_rgb += 6;
ROTATE_IQ( i, q, -0.866025f, -0.5f ); /* -120 degrees */
}
while ( --burst_remain );
}
static void correct_errors( snes_ntsc_rgb_t color, snes_ntsc_rgb_t* out );
#if DISABLE_CORRECTION
#define CORRECT_ERROR( a ) { out [i] += rgb_bias; }
#define DISTRIBUTE_ERROR( a, b, c ) { out [i] += rgb_bias; }
#else
#define CORRECT_ERROR( a ) { out [a] += error; }
#define DISTRIBUTE_ERROR( a, b, c ) {\
snes_ntsc_rgb_t fourth = (error + 2 * snes_ntsc_rgb_builder) >> 2;\
fourth &= (rgb_bias >> 1) - snes_ntsc_rgb_builder;\
fourth -= rgb_bias >> 2;\
out [a] += fourth;\
out [b] += fourth;\
out [c] += fourth;\
out [i] += error - (fourth * 3);\
}
#endif
#define RGB_PALETTE_OUT( rgb, out_ )\
{\
unsigned char* out = (out_);\
snes_ntsc_rgb_t clamped = (rgb);\
SNES_NTSC_CLAMP_( clamped, (8 - rgb_bits) );\
out [0] = (unsigned char) (clamped >> 21);\
out [1] = (unsigned char) (clamped >> 11);\
out [2] = (unsigned char) (clamped >> 1);\
}
/* blitter related */
#ifndef restrict
#if defined (__GNUC__)
#define restrict __restrict__
#elif defined (_MSC_VER) && _MSC_VER > 1300
#define restrict __restrict
#else
/* no support for restricted pointers */
#define restrict
#endif
#endif
#include <limits.h>
#if SNES_NTSC_OUT_DEPTH <= 16
#if USHRT_MAX == 0xFFFF
typedef unsigned short snes_ntsc_out_t;
#else
#error "Need 16-bit int type"
#endif
#else
#if UINT_MAX == 0xFFFFFFFF
typedef unsigned int snes_ntsc_out_t;
#elif ULONG_MAX == 0xFFFFFFFF
typedef unsigned long snes_ntsc_out_t;
#else
#error "Need 32-bit int type"
#endif
#endif
/* snes_ntsc 0.2.2. http://www.slack.net/~ant/ */
/* Common implementation of NTSC filters */
#include <assert.h>
#include <math.h>
/* Copyright (C) 2006 Shay Green. This module is free software; you
can redistribute it and/or modify it under the terms of the GNU Lesser
General Public License as published by the Free Software Foundation; either
version 2.1 of the License, or (at your option) any later version. This
module is distributed in the hope that it will be useful, but WITHOUT ANY
WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS
FOR A PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
details. You should have received a copy of the GNU Lesser General Public
License along with this module; if not, write to the Free Software Foundation,
Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA */
#define DISABLE_CORRECTION 0
#undef PI
#define PI 3.14159265358979323846f
#ifndef LUMA_CUTOFF
#define LUMA_CUTOFF 0.20
#endif
#ifndef gamma_size
#define gamma_size 1
#endif
#ifndef rgb_bits
#define rgb_bits 8
#endif
#ifndef artifacts_max
#define artifacts_max (artifacts_mid * 1.5f)
#endif
#ifndef fringing_max
#define fringing_max (fringing_mid * 2)
#endif
#ifndef STD_HUE_CONDITION
#define STD_HUE_CONDITION( setup ) 1
#endif
#define ext_decoder_hue (std_decoder_hue + 15)
#define rgb_unit (1 << rgb_bits)
#define rgb_offset (rgb_unit * 2 + 0.5f)
enum { burst_size = snes_ntsc_entry_size / burst_count };
enum { kernel_half = 16 };
enum { kernel_size = kernel_half * 2 + 1 };
typedef struct init_t
{
float to_rgb [burst_count * 6];
float to_float [gamma_size];
float contrast;
float brightness;
float artifacts;
float fringing;
float kernel [rescale_out * kernel_size * 2];
} init_t;
#define ROTATE_IQ( i, q, sin_b, cos_b ) {\
float t;\
t = i * cos_b - q * sin_b;\
q = i * sin_b + q * cos_b;\
i = t;\
}
static void init_filters( init_t* impl, snes_ntsc_setup_t const* setup )
{
#if rescale_out > 1
float kernels [kernel_size * 2];
#else
float* const kernels = impl->kernel;
#endif
/* generate luma (y) filter using sinc kernel */
{
/* sinc with rolloff (dsf) */
float const rolloff = 1 + (float) setup->sharpness * (float) 0.032;
float const maxh = 32;
float const pow_a_n = (float) pow( rolloff, maxh );
float sum;
int i;
/* quadratic mapping to reduce negative (blurring) range */
float to_angle = (float) setup->resolution + 1;
to_angle = PI / maxh * (float) LUMA_CUTOFF * (to_angle * to_angle + 1);
kernels [kernel_size * 3 / 2] = maxh; /* default center value */
for ( i = 0; i < kernel_half * 2 + 1; i++ )
{
int x = i - kernel_half;
float angle = x * to_angle;
/* instability occurs at center point with rolloff very close to 1.0 */
if ( x || pow_a_n > (float) 1.056 || pow_a_n < (float) 0.981 )
{
float rolloff_cos_a = rolloff * (float) cos( angle );
float num = 1 - rolloff_cos_a -
pow_a_n * (float) cos( maxh * angle ) +
pow_a_n * rolloff * (float) cos( (maxh - 1) * angle );
float den = 1 - rolloff_cos_a - rolloff_cos_a + rolloff * rolloff;
float dsf = num / den;
kernels [kernel_size * 3 / 2 - kernel_half + i] = dsf - (float) 0.5;
}
}
/* apply blackman window and find sum */
sum = 0;
for ( i = 0; i < kernel_half * 2 + 1; i++ )
{
float x = PI * 2 / (kernel_half * 2) * i;
float blackman = 0.42f - 0.5f * (float) cos( x ) + 0.08f * (float) cos( x * 2 );
sum += (kernels [kernel_size * 3 / 2 - kernel_half + i] *= blackman);
}
/* normalize kernel */
sum = 1.0f / sum;
for ( i = 0; i < kernel_half * 2 + 1; i++ )
{
int x = kernel_size * 3 / 2 - kernel_half + i;
kernels [x] *= sum;
assert( kernels [x] == kernels [x] ); /* catch numerical instability */
}
}
/* generate chroma (iq) filter using gaussian kernel */
{
float const cutoff_factor = -0.03125f;
float cutoff = (float) setup->bleed;
int i;
if ( cutoff < 0 )
{
/* keep extreme value accessible only near upper end of scale (1.0) */
cutoff *= cutoff;
cutoff *= cutoff;
cutoff *= cutoff;
cutoff *= -30.0f / 0.65f;
}
cutoff = cutoff_factor - 0.65f * cutoff_factor * cutoff;
for ( i = -kernel_half; i <= kernel_half; i++ )
kernels [kernel_size / 2 + i] = (float) exp( i * i * cutoff );
/* normalize even and odd phases separately */
for ( i = 0; i < 2; i++ )
{
float sum = 0;
int x;
for ( x = i; x < kernel_size; x += 2 )
sum += kernels [x];
sum = 1.0f / sum;
for ( x = i; x < kernel_size; x += 2 )
{
kernels [x] *= sum;
assert( kernels [x] == kernels [x] ); /* catch numerical instability */
}
}
}
/*
printf( "luma:\n" );
for ( i = kernel_size; i < kernel_size * 2; i++ )
printf( "%f\n", kernels [i] );
printf( "chroma:\n" );
for ( i = 0; i < kernel_size; i++ )
printf( "%f\n", kernels [i] );
*/
/* generate linear rescale kernels */
#if rescale_out > 1
{
float weight = 1.0f;
float* out = impl->kernel;
int n = rescale_out;
do
{
float remain = 0;
int i;
weight -= 1.0f / rescale_in;
for ( i = 0; i < kernel_size * 2; i++ )
{
float cur = kernels [i];
float m = cur * weight;
*out++ = m + remain;
remain = cur - m;
}
}
while ( --n );
}
#endif
}
static float const default_decoder [6] =
{ 0.956f, 0.621f, -0.272f, -0.647f, -1.105f, 1.702f };
static void init( init_t* impl, snes_ntsc_setup_t const* setup )
{
impl->brightness = (float) setup->brightness * (0.5f * rgb_unit) + rgb_offset;
impl->contrast = (float) setup->contrast * (0.5f * rgb_unit) + rgb_unit;
#ifdef default_palette_contrast
if ( !setup->palette )
impl->contrast *= default_palette_contrast;
#endif
impl->artifacts = (float) setup->artifacts;
if ( impl->artifacts > 0 )
impl->artifacts *= artifacts_max - artifacts_mid;
impl->artifacts = impl->artifacts * artifacts_mid + artifacts_mid;
impl->fringing = (float) setup->fringing;
if ( impl->fringing > 0 )
impl->fringing *= fringing_max - fringing_mid;
impl->fringing = impl->fringing * fringing_mid + fringing_mid;
init_filters( impl, setup );
/* generate gamma table */
if ( gamma_size > 1 )
{
float const to_float = 1.0f / (gamma_size - (gamma_size > 1));
float const gamma = 1.1333f - (float) setup->gamma * 0.5f;
/* match common PC's 2.2 gamma to TV's 2.65 gamma */
int i;
for ( i = 0; i < gamma_size; i++ )
impl->to_float [i] =
(float) pow( i * to_float, gamma ) * impl->contrast + impl->brightness;
}
/* setup decoder matricies */
{
float hue = (float) setup->hue * PI + PI / 180 * ext_decoder_hue;
float sat = (float) setup->saturation + 1;
float const* decoder = setup->decoder_matrix;
if ( !decoder )
{
decoder = default_decoder;
if ( STD_HUE_CONDITION( setup ) )
hue += PI / 180 * (std_decoder_hue - ext_decoder_hue);
}
{
float s = (float) sin( hue ) * sat;
float c = (float) cos( hue ) * sat;
float* out = impl->to_rgb;
int n;
n = burst_count;
do
{
float const* in = decoder;
int n = 3;
do
{
float i = *in++;
float q = *in++;
*out++ = i * c - q * s;
*out++ = i * s + q * c;
}
while ( --n );
if ( burst_count <= 1 )
break;
ROTATE_IQ( s, c, 0.866025f, -0.5f ); /* +120 degrees */
}
while ( --n );
}
}
}
/* kernel generation */
#define RGB_TO_YIQ( r, g, b, y, i ) (\
(y = (r) * 0.299f + (g) * 0.587f + (b) * 0.114f),\
(i = (r) * 0.596f - (g) * 0.275f - (b) * 0.321f),\
((r) * 0.212f - (g) * 0.523f + (b) * 0.311f)\
)
#define YIQ_TO_RGB( y, i, q, to_rgb, type, r, g ) (\
r = (type) (y + to_rgb [0] * i + to_rgb [1] * q),\
g = (type) (y + to_rgb [2] * i + to_rgb [3] * q),\
(type) (y + to_rgb [4] * i + to_rgb [5] * q)\
)
#define PACK_RGB( r, g, b ) ((r) << 21 | (g) << 11 | (b) << 1)
enum { rgb_kernel_size = burst_size / alignment_count };
enum { rgb_bias = rgb_unit * 2 * snes_ntsc_rgb_builder };
typedef struct pixel_info_t
{
int offset;
float negate;
float kernel [4];
} pixel_info_t;
#if rescale_in > 1
#define PIXEL_OFFSET_( ntsc, scaled ) \
(kernel_size / 2 + ntsc + (scaled != 0) + (rescale_out - scaled) % rescale_out + \
(kernel_size * 2 * scaled))
#define PIXEL_OFFSET( ntsc, scaled ) \
PIXEL_OFFSET_( ((ntsc) - (scaled) / rescale_out * rescale_in),\
(((scaled) + rescale_out * 10) % rescale_out) ),\
(1.0f - (((ntsc) + 100) & 2))
#else
#define PIXEL_OFFSET( ntsc, scaled ) \
(kernel_size / 2 + (ntsc) - (scaled)),\
(1.0f - (((ntsc) + 100) & 2))
#endif
extern pixel_info_t const snes_ntsc_pixels [alignment_count];
/* Generate pixel at all burst phases and column alignments */
static void gen_kernel( init_t* impl, float y, float i, float q, snes_ntsc_rgb_t* out )
{
/* generate for each scanline burst phase */
float const* to_rgb = impl->to_rgb;
int burst_remain = burst_count;
y -= rgb_offset;
do
{
/* Encode yiq into *two* composite signals (to allow control over artifacting).
Convolve these with kernels which: filter respective components, apply
sharpening, and rescale horizontally. Convert resulting yiq to rgb and pack
into integer. Based on algorithm by NewRisingSun. */
pixel_info_t const* pixel = snes_ntsc_pixels;
int alignment_remain = alignment_count;
do
{
/* negate is -1 when composite starts at odd multiple of 2 */
float const yy = y * impl->fringing * pixel->negate;
float const ic0 = (i + yy) * pixel->kernel [0];
float const qc1 = (q + yy) * pixel->kernel [1];
float const ic2 = (i - yy) * pixel->kernel [2];
float const qc3 = (q - yy) * pixel->kernel [3];
float const factor = impl->artifacts * pixel->negate;
float const ii = i * factor;
float const yc0 = (y + ii) * pixel->kernel [0];
float const yc2 = (y - ii) * pixel->kernel [2];
float const qq = q * factor;
float const yc1 = (y + qq) * pixel->kernel [1];
float const yc3 = (y - qq) * pixel->kernel [3];
float const* k = &impl->kernel [pixel->offset];
int n;
++pixel;
for ( n = rgb_kernel_size; n; --n )
{
float i = k[0]*ic0 + k[2]*ic2;
float q = k[1]*qc1 + k[3]*qc3;
float y = k[kernel_size+0]*yc0 + k[kernel_size+1]*yc1 +
k[kernel_size+2]*yc2 + k[kernel_size+3]*yc3 + rgb_offset;
if ( rescale_out <= 1 )
k--;
else if ( k < &impl->kernel [kernel_size * 2 * (rescale_out - 1)] )
k += kernel_size * 2 - 1;
else
k -= kernel_size * 2 * (rescale_out - 1) + 2;
{
int r, g, b = YIQ_TO_RGB( y, i, q, to_rgb, int, r, g );
*out++ = PACK_RGB( r, g, b ) - rgb_bias;
}
}
}
while ( alignment_count > 1 && --alignment_remain );
if ( burst_count <= 1 )
break;
to_rgb += 6;
ROTATE_IQ( i, q, -0.866025f, -0.5f ); /* -120 degrees */
}
while ( --burst_remain );
}
static void correct_errors( snes_ntsc_rgb_t color, snes_ntsc_rgb_t* out );
#if DISABLE_CORRECTION
#define CORRECT_ERROR( a ) { out [i] += rgb_bias; }
#define DISTRIBUTE_ERROR( a, b, c ) { out [i] += rgb_bias; }
#else
#define CORRECT_ERROR( a ) { out [a] += error; }
#define DISTRIBUTE_ERROR( a, b, c ) {\
snes_ntsc_rgb_t fourth = (error + 2 * snes_ntsc_rgb_builder) >> 2;\
fourth &= (rgb_bias >> 1) - snes_ntsc_rgb_builder;\
fourth -= rgb_bias >> 2;\
out [a] += fourth;\
out [b] += fourth;\
out [c] += fourth;\
out [i] += error - (fourth * 3);\
}
#endif
#define RGB_PALETTE_OUT( rgb, out_ )\
{\
unsigned char* out = (out_);\
snes_ntsc_rgb_t clamped = (rgb);\
SNES_NTSC_CLAMP_( clamped, (8 - rgb_bits) );\
out [0] = (unsigned char) (clamped >> 21);\
out [1] = (unsigned char) (clamped >> 11);\
out [2] = (unsigned char) (clamped >> 1);\
}
/* blitter related */
#ifndef restrict
#if defined (__GNUC__)
#define restrict __restrict__
#elif defined (_MSC_VER) && _MSC_VER > 1300
#define restrict __restrict
#else
/* no support for restricted pointers */
#define restrict
#endif
#endif
#include <limits.h>
#if SNES_NTSC_OUT_DEPTH <= 16
#if USHRT_MAX == 0xFFFF
typedef unsigned short snes_ntsc_out_t;
#else
#error "Need 16-bit int type"
#endif
#else
#if UINT_MAX == 0xFFFFFFFF
typedef unsigned int snes_ntsc_out_t;
#elif ULONG_MAX == 0xFFFFFFFF
typedef unsigned long snes_ntsc_out_t;
#else
#error "Need 32-bit int type"
#endif
#endif

View File

@@ -0,0 +1,38 @@
#include "pixellate2x.hpp"
void Pixellate2xFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
outwidth = (width <= 256) ? width * 2 : width;
outheight = (height <= 240) ? height * 2 : height;
}
void Pixellate2xFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
pitch >>= 1;
outpitch >>= 2;
uint32_t *out0 = output;
uint32_t *out1 = output + outpitch;
for(unsigned y = 0; y < height; y++) {
for(unsigned x = 0; x < width; x++) {
uint32_t p = colortable[*input++];
*out0++ = p;
if(height <= 240) *out1++ = p;
if(width > 256) continue;
*out0++ = p;
if(height <= 240) *out1++ = p;
}
input += pitch - width;
if(height <= 240) {
out0 += outpitch + outpitch - 512;
out1 += outpitch + outpitch - 512;
} else {
out0 += outpitch - 512;
}
}
}

View File

@@ -0,0 +1,5 @@
class Pixellate2xFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
} filter_pixellate2x;

View File

@@ -0,0 +1,53 @@
#include "scale2x.hpp"
void Scale2xFilter::size(unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
if(width > 256 || height > 240) return filter_direct.size(outwidth, outheight, width, height);
outwidth = width * 2;
outheight = height * 2;
}
void Scale2xFilter::render(
uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
if(width > 256 || height > 240) {
filter_direct.render(output, outpitch, input, pitch, width, height);
return;
}
pitch >>= 1;
outpitch >>= 2;
uint32_t *out0 = output;
uint32_t *out1 = output + outpitch;
for(unsigned y = 0; y < height; y++) {
int prevline = (y == 0 ? 0 : pitch);
int nextline = (y == height - 1 ? 0 : pitch);
for(unsigned x = 0; x < width; x++) {
uint16_t A = *(input - prevline);
uint16_t B = (x > 0) ? *(input - 1) : *input;
uint16_t C = *input;
uint16_t D = (x < 255) ? *(input + 1) : *input;
uint16_t E = *(input++ + nextline);
uint32_t c = colortable[C];
if(A != E && B != D) {
*out0++ = (A == B ? colortable[A] : c);
*out0++ = (A == D ? colortable[A] : c);
*out1++ = (E == B ? colortable[E] : c);
*out1++ = (E == D ? colortable[E] : c);
} else {
*out0++ = c;
*out0++ = c;
*out1++ = c;
*out1++ = c;
}
}
input += pitch - width;
out0 += outpitch + outpitch - 512;
out1 += outpitch + outpitch - 512;
}
}

View File

@@ -0,0 +1,5 @@
class Scale2xFilter {
public:
void size(unsigned&, unsigned&, unsigned, unsigned);
void render(uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
} filter_scale2x;

83
snesfilter/snesfilter.cpp Normal file
View File

@@ -0,0 +1,83 @@
#include "snesfilter.hpp"
#if defined(_WIN32)
#define dllexport __declspec(dllexport)
#else
#define dllexport
#endif
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#define QT_CORE_LIB
#include <QtGui>
#include <nall/config.hpp>
#include <nall/platform.hpp>
#include <nall/string.hpp>
using namespace nall;
const uint32_t *colortable;
configuration *config;
#include "direct/direct.cpp"
#include "pixellate2x/pixellate2x.cpp"
#include "scale2x/scale2x.cpp"
#include "2xsai/2xsai.cpp"
#include "lq2x/lq2x.cpp"
#include "hq2x/hq2x.cpp"
#include "ntsc/ntsc.cpp"
dllexport const char* snesfilter_supported() {
return "Pixellate2x;Scale2x;2xSaI;Super 2xSaI;Super Eagle;LQ2x;HQ2x;NTSC";
}
dllexport void snesfilter_configuration(configuration &config_) {
config = &config_;
if(config) {
filter_ntsc.bind(*config);
}
}
dllexport void snesfilter_colortable(const uint32_t *colortable_) {
colortable = colortable_;
}
dllexport void snesfilter_size(unsigned filter, unsigned &outwidth, unsigned &outheight, unsigned width, unsigned height) {
switch(filter) {
default: return filter_direct.size(outwidth, outheight, width, height);
case 1: return filter_pixellate2x.size(outwidth, outheight, width, height);
case 2: return filter_scale2x.size(outwidth, outheight, width, height);
case 3: return filter_2xsai.size(outwidth, outheight, width, height);
case 4: return filter_super2xsai.size(outwidth, outheight, width, height);
case 5: return filter_supereagle.size(outwidth, outheight, width, height);
case 6: return filter_lq2x.size(outwidth, outheight, width, height);
case 7: return filter_hq2x.size(outwidth, outheight, width, height);
case 8: return filter_ntsc.size(outwidth, outheight, width, height);
}
}
dllexport void snesfilter_render(
unsigned filter, uint32_t *output, unsigned outpitch,
const uint16_t *input, unsigned pitch, unsigned width, unsigned height
) {
switch(filter) {
default: return filter_direct.render(output, outpitch, input, pitch, width, height);
case 1: return filter_pixellate2x.render(output, outpitch, input, pitch, width, height);
case 2: return filter_scale2x.render(output, outpitch, input, pitch, width, height);
case 3: return filter_2xsai.render(output, outpitch, input, pitch, width, height);
case 4: return filter_super2xsai.render(output, outpitch, input, pitch, width, height);
case 5: return filter_supereagle.render(output, outpitch, input, pitch, width, height);
case 6: return filter_lq2x.render(output, outpitch, input, pitch, width, height);
case 7: return filter_hq2x.render(output, outpitch, input, pitch, width, height);
case 8: return filter_ntsc.render(output, outpitch, input, pitch, width, height);
}
}
dllexport QWidget* snesfilter_settings(unsigned filter) {
switch(filter) {
default: return 0;
case 8: return filter_ntsc.settings();
}
}

12
snesfilter/snesfilter.hpp Normal file
View File

@@ -0,0 +1,12 @@
#include <stdint.h>
class QWidget;
namespace nall { class configuration; }
extern "C" {
const char* snesfilter_supported();
void snesfilter_configuration(nall::configuration&);
void snesfilter_colortable(const uint32_t*);
void snesfilter_size(unsigned, unsigned&, unsigned&, unsigned, unsigned);
void snesfilter_render(unsigned, uint32_t*, unsigned, const uint16_t*, unsigned, unsigned, unsigned);
QWidget* snesfilter_settings(unsigned);
}

2
snesfilter/sync.sh Normal file
View File

@@ -0,0 +1,2 @@
rm -r nall
cp -r ../nall ./nall

77
snesreader/7z_C/7zAlloc.c Normal file
View File

@@ -0,0 +1,77 @@
/* 7zAlloc.c -- Allocation functions
2008-10-04 : Igor Pavlov : Public domain */
#include <stdlib.h>
#include "7zAlloc.h"
/* #define _SZ_ALLOC_DEBUG */
/* use _SZ_ALLOC_DEBUG to debug alloc/free operations */
#ifdef _SZ_ALLOC_DEBUG
#ifdef _WIN32
#include <windows.h>
#endif
#include <stdio.h>
int g_allocCount = 0;
int g_allocCountTemp = 0;
#endif
void *SzAlloc(void *p, size_t size)
{
p = p;
if (size == 0)
return 0;
#ifdef _SZ_ALLOC_DEBUG
fprintf(stderr, "\nAlloc %10d bytes; count = %10d", size, g_allocCount);
g_allocCount++;
#endif
return malloc(size);
}
void SzFree(void *p, void *address)
{
p = p;
#ifdef _SZ_ALLOC_DEBUG
if (address != 0)
{
g_allocCount--;
fprintf(stderr, "\nFree; count = %10d", g_allocCount);
}
#endif
free(address);
}
void *SzAllocTemp(void *p, size_t size)
{
p = p;
if (size == 0)
return 0;
#ifdef _SZ_ALLOC_DEBUG
fprintf(stderr, "\nAlloc_temp %10d bytes; count = %10d", size, g_allocCountTemp);
g_allocCountTemp++;
#ifdef _WIN32
return HeapAlloc(GetProcessHeap(), 0, size);
#endif
#endif
return malloc(size);
}
void SzFreeTemp(void *p, void *address)
{
p = p;
#ifdef _SZ_ALLOC_DEBUG
if (address != 0)
{
g_allocCountTemp--;
fprintf(stderr, "\nFree_temp; count = %10d", g_allocCountTemp);
}
#ifdef _WIN32
HeapFree(GetProcessHeap(), 0, address);
return;
#endif
#endif
free(address);
}

23
snesreader/7z_C/7zAlloc.h Normal file
View File

@@ -0,0 +1,23 @@
/* 7zAlloc.h -- Allocation functions
2008-10-04 : Igor Pavlov : Public domain */
#ifndef __7Z_ALLOC_H
#define __7Z_ALLOC_H
#include <stddef.h>
#ifdef __cplusplus
extern "C" {
#endif
void *SzAlloc(void *p, size_t size);
void SzFree(void *p, void *address);
void *SzAllocTemp(void *p, size_t size);
void SzFreeTemp(void *p, void *address);
#ifdef __cplusplus
}
#endif
#endif

36
snesreader/7z_C/7zBuf.c Normal file
View File

@@ -0,0 +1,36 @@
/* 7zBuf.c -- Byte Buffer
2008-03-28
Igor Pavlov
Public domain */
#include "7zBuf.h"
void Buf_Init(CBuf *p)
{
p->data = 0;
p->size = 0;
}
int Buf_Create(CBuf *p, size_t size, ISzAlloc *alloc)
{
p->size = 0;
if (size == 0)
{
p->data = 0;
return 1;
}
p->data = (Byte *)alloc->Alloc(alloc, size);
if (p->data != 0)
{
p->size = size;
return 1;
}
return 0;
}
void Buf_Free(CBuf *p, ISzAlloc *alloc)
{
alloc->Free(alloc, p->data);
p->data = 0;
p->size = 0;
}

31
snesreader/7z_C/7zBuf.h Normal file
View File

@@ -0,0 +1,31 @@
/* 7zBuf.h -- Byte Buffer
2008-10-04 : Igor Pavlov : Public domain */
#ifndef __7Z_BUF_H
#define __7Z_BUF_H
#include "Types.h"
typedef struct
{
Byte *data;
size_t size;
} CBuf;
void Buf_Init(CBuf *p);
int Buf_Create(CBuf *p, size_t size, ISzAlloc *alloc);
void Buf_Free(CBuf *p, ISzAlloc *alloc);
typedef struct
{
Byte *data;
size_t size;
size_t pos;
} CDynBuf;
void DynBuf_Construct(CDynBuf *p);
void DynBuf_SeekToBeg(CDynBuf *p);
int DynBuf_Write(CDynBuf *p, const Byte *buf, size_t size, ISzAlloc *alloc);
void DynBuf_Free(CDynBuf *p, ISzAlloc *alloc);
#endif

194
snesreader/7z_C/7zC.txt Normal file
View File

@@ -0,0 +1,194 @@
7z ANSI-C Decoder 4.62
----------------------
7z ANSI-C provides 7z/LZMA decoding.
7z ANSI-C version is simplified version ported from C++ code.
LZMA is default and general compression method of 7z format
in 7-Zip compression program (www.7-zip.org). LZMA provides high
compression ratio and very fast decompression.
LICENSE
-------
7z ANSI-C Decoder is part of the LZMA SDK.
LZMA SDK is written and placed in the public domain by Igor Pavlov.
Files
---------------------
7zDecode.* - Low level 7z decoding
7zExtract.* - High level 7z decoding
7zHeader.* - .7z format constants
7zIn.* - .7z archive opening
7zItem.* - .7z structures
7zMain.c - Test application
How To Use
----------
You must download 7-Zip program from www.7-zip.org.
You can create .7z archive with 7z.exe or 7za.exe:
7za.exe a archive.7z *.htm -r -mx -m0fb=255
If you have big number of files in archive, and you need fast extracting,
you can use partly-solid archives:
7za.exe a archive.7z *.htm -ms=512K -r -mx -m0fb=255 -m0d=512K
In that example 7-Zip will use 512KB solid blocks. So it needs to decompress only
512KB for extracting one file from such archive.
Limitations of current version of 7z ANSI-C Decoder
---------------------------------------------------
- It reads only "FileName", "Size", "LastWriteTime" and "CRC" information for each file in archive.
- It supports only LZMA and Copy (no compression) methods with BCJ or BCJ2 filters.
- It converts original UTF-16 Unicode file names to UTF-8 Unicode file names.
These limitations will be fixed in future versions.
Using 7z ANSI-C Decoder Test application:
-----------------------------------------
Usage: 7zDec <command> <archive_name>
<Command>:
e: Extract files from archive
l: List contents of archive
t: Test integrity of archive
Example:
7zDec l archive.7z
lists contents of archive.7z
7zDec e archive.7z
extracts files from archive.7z to current folder.
How to use .7z Decoder
----------------------
Memory allocation
~~~~~~~~~~~~~~~~~
7z Decoder uses two memory pools:
1) Temporary pool
2) Main pool
Such scheme can allow you to avoid fragmentation of allocated blocks.
Steps for using 7z decoder
--------------------------
Use code at 7zMain.c as example.
1) Declare variables:
inStream /* implements ILookInStream interface */
CSzArEx db; /* 7z archive database structure */
ISzAlloc allocImp; /* memory functions for main pool */
ISzAlloc allocTempImp; /* memory functions for temporary pool */
2) call CrcGenerateTable(); function to initialize CRC structures.
3) call SzArEx_Init(&db); function to initialize db structures.
4) call SzArEx_Open(&db, inStream, &allocMain, &allocTemp) to open archive
This function opens archive "inStream" and reads headers to "db".
All items in "db" will be allocated with "allocMain" functions.
SzArEx_Open function allocates and frees temporary structures by "allocTemp" functions.
5) List items or Extract items
Listing code:
~~~~~~~~~~~~~
{
UInt32 i;
for (i = 0; i < db.db.NumFiles; i++)
{
CFileItem *f = db.db.Files + i;
printf("%10d %s\n", (int)f->Size, f->Name);
}
}
Extracting code:
~~~~~~~~~~~~~~~~
SZ_RESULT SzAr_Extract(
CArchiveDatabaseEx *db,
ILookInStream *inStream,
UInt32 fileIndex, /* index of file */
UInt32 *blockIndex, /* index of solid block */
Byte **outBuffer, /* pointer to pointer to output buffer (allocated with allocMain) */
size_t *outBufferSize, /* buffer size for output buffer */
size_t *offset, /* offset of stream for required file in *outBuffer */
size_t *outSizeProcessed, /* size of file in *outBuffer */
ISzAlloc *allocMain,
ISzAlloc *allocTemp);
If you need to decompress more than one file, you can send these values from previous call:
blockIndex,
outBuffer,
outBufferSize,
You can consider "outBuffer" as cache of solid block. If your archive is solid,
it will increase decompression speed.
After decompressing you must free "outBuffer":
allocImp.Free(outBuffer);
6) call SzArEx_Free(&db, allocImp.Free) to free allocated items in "db".
Memory requirements for .7z decoding
------------------------------------
Memory usage for Archive opening:
- Temporary pool:
- Memory for uncompressed .7z headers
- some other temporary blocks
- Main pool:
- Memory for database:
Estimated size of one file structures in solid archive:
- Size (4 or 8 Bytes)
- CRC32 (4 bytes)
- LastWriteTime (8 bytes)
- Some file information (4 bytes)
- File Name (variable length) + pointer + allocation structures
Memory usage for archive Decompressing:
- Temporary pool:
- Memory for LZMA decompressing structures
- Main pool:
- Memory for decompressed solid block
- Memory for temprorary buffers, if BCJ2 fileter is used. Usually these
temprorary buffers can be about 15% of solid block size.
7z Decoder doesn't allocate memory for compressed blocks.
Instead of this, you must allocate buffer with desired
size before calling 7z Decoder. Use 7zMain.c as example.
Defines
-------
_SZ_ALLOC_DEBUG - define it if you want to debug alloc/free operations to stderr.
---
http://www.7-zip.org
http://www.7-zip.org/sdk.html
http://www.7-zip.org/support.html

35
snesreader/7z_C/7zCrc.c Normal file
View File

@@ -0,0 +1,35 @@
/* 7zCrc.c -- CRC32 calculation
2008-08-05
Igor Pavlov
Public domain */
#include "7zCrc.h"
#define kCrcPoly 0xEDB88320
UInt32 g_CrcTable[256];
void MY_FAST_CALL CrcGenerateTable(void)
{
UInt32 i;
for (i = 0; i < 256; i++)
{
UInt32 r = i;
int j;
for (j = 0; j < 8; j++)
r = (r >> 1) ^ (kCrcPoly & ~((r & 1) - 1));
g_CrcTable[i] = r;
}
}
UInt32 MY_FAST_CALL CrcUpdate(UInt32 v, const void *data, size_t size)
{
const Byte *p = (const Byte *)data;
for (; size > 0 ; size--, p++)
v = CRC_UPDATE_BYTE(v, *p);
return v;
}
UInt32 MY_FAST_CALL CrcCalc(const void *data, size_t size)
{
return CrcUpdate(CRC_INIT_VAL, data, size) ^ 0xFFFFFFFF;
}

32
snesreader/7z_C/7zCrc.h Normal file
View File

@@ -0,0 +1,32 @@
/* 7zCrc.h -- CRC32 calculation
2008-03-13
Igor Pavlov
Public domain */
#ifndef __7Z_CRC_H
#define __7Z_CRC_H
#include <stddef.h>
#include "Types.h"
#ifdef __cplusplus
extern "C" {
#endif
extern UInt32 g_CrcTable[];
void MY_FAST_CALL CrcGenerateTable(void);
#define CRC_INIT_VAL 0xFFFFFFFF
#define CRC_GET_DIGEST(crc) ((crc) ^ 0xFFFFFFFF)
#define CRC_UPDATE_BYTE(crc, b) (g_CrcTable[((crc) ^ (b)) & 0xFF] ^ ((crc) >> 8))
UInt32 MY_FAST_CALL CrcUpdate(UInt32 crc, const void *data, size_t size);
UInt32 MY_FAST_CALL CrcCalc(const void *data, size_t size);
#ifdef __cplusplus
}
#endif
#endif

257
snesreader/7z_C/7zDecode.c Normal file
View File

@@ -0,0 +1,257 @@
/* 7zDecode.c -- Decoding from 7z folder
2008-11-23 : Igor Pavlov : Public domain */
#include <string.h>
#include "Bcj2.h"
#include "Bra.h"
#include "LzmaDec.h"
#include "7zDecode.h"
#define k_Copy 0
#define k_LZMA 0x30101
#define k_BCJ 0x03030103
#define k_BCJ2 0x0303011B
static SRes SzDecodeLzma(CSzCoderInfo *coder, UInt64 inSize, ILookInStream *inStream,
Byte *outBuffer, SizeT outSize, ISzAlloc *allocMain)
{
CLzmaDec state;
SRes res = SZ_OK;
LzmaDec_Construct(&state);
RINOK(LzmaDec_AllocateProbs(&state, coder->Props.data, (unsigned)coder->Props.size, allocMain));
state.dic = outBuffer;
state.dicBufSize = outSize;
LzmaDec_Init(&state);
for (;;)
{
Byte *inBuf = NULL;
size_t lookahead = (1 << 18);
if (lookahead > inSize)
lookahead = (size_t)inSize;
res = inStream->Look((void *)inStream, (void **)&inBuf, &lookahead);
if (res != SZ_OK)
break;
{
SizeT inProcessed = (SizeT)lookahead, dicPos = state.dicPos;
ELzmaStatus status;
res = LzmaDec_DecodeToDic(&state, outSize, inBuf, &inProcessed, LZMA_FINISH_END, &status);
lookahead -= inProcessed;
inSize -= inProcessed;
if (res != SZ_OK)
break;
if (state.dicPos == state.dicBufSize || (inProcessed == 0 && dicPos == state.dicPos))
{
if (state.dicBufSize != outSize || lookahead != 0 ||
(status != LZMA_STATUS_FINISHED_WITH_MARK &&
status != LZMA_STATUS_MAYBE_FINISHED_WITHOUT_MARK))
res = SZ_ERROR_DATA;
break;
}
res = inStream->Skip((void *)inStream, inProcessed);
if (res != SZ_OK)
break;
}
}
LzmaDec_FreeProbs(&state, allocMain);
return res;
}
static SRes SzDecodeCopy(UInt64 inSize, ILookInStream *inStream, Byte *outBuffer)
{
while (inSize > 0)
{
void *inBuf;
size_t curSize = (1 << 18);
if (curSize > inSize)
curSize = (size_t)inSize;
RINOK(inStream->Look((void *)inStream, (void **)&inBuf, &curSize));
if (curSize == 0)
return SZ_ERROR_INPUT_EOF;
memcpy(outBuffer, inBuf, curSize);
outBuffer += curSize;
inSize -= curSize;
RINOK(inStream->Skip((void *)inStream, curSize));
}
return SZ_OK;
}
#define IS_UNSUPPORTED_METHOD(m) ((m) != k_Copy && (m) != k_LZMA)
#define IS_UNSUPPORTED_CODER(c) (IS_UNSUPPORTED_METHOD(c.MethodID) || c.NumInStreams != 1 || c.NumOutStreams != 1)
#define IS_NO_BCJ(c) (c.MethodID != k_BCJ || c.NumInStreams != 1 || c.NumOutStreams != 1)
#define IS_NO_BCJ2(c) (c.MethodID != k_BCJ2 || c.NumInStreams != 4 || c.NumOutStreams != 1)
static
SRes CheckSupportedFolder(const CSzFolder *f)
{
if (f->NumCoders < 1 || f->NumCoders > 4)
return SZ_ERROR_UNSUPPORTED;
if (IS_UNSUPPORTED_CODER(f->Coders[0]))
return SZ_ERROR_UNSUPPORTED;
if (f->NumCoders == 1)
{
if (f->NumPackStreams != 1 || f->PackStreams[0] != 0 || f->NumBindPairs != 0)
return SZ_ERROR_UNSUPPORTED;
return SZ_OK;
}
if (f->NumCoders == 2)
{
if (IS_NO_BCJ(f->Coders[1]) ||
f->NumPackStreams != 1 || f->PackStreams[0] != 0 ||
f->NumBindPairs != 1 ||
f->BindPairs[0].InIndex != 1 || f->BindPairs[0].OutIndex != 0)
return SZ_ERROR_UNSUPPORTED;
return SZ_OK;
}
if (f->NumCoders == 4)
{
if (IS_UNSUPPORTED_CODER(f->Coders[1]) ||
IS_UNSUPPORTED_CODER(f->Coders[2]) ||
IS_NO_BCJ2(f->Coders[3]))
return SZ_ERROR_UNSUPPORTED;
if (f->NumPackStreams != 4 ||
f->PackStreams[0] != 2 ||
f->PackStreams[1] != 6 ||
f->PackStreams[2] != 1 ||
f->PackStreams[3] != 0 ||
f->NumBindPairs != 3 ||
f->BindPairs[0].InIndex != 5 || f->BindPairs[0].OutIndex != 0 ||
f->BindPairs[1].InIndex != 4 || f->BindPairs[1].OutIndex != 1 ||
f->BindPairs[2].InIndex != 3 || f->BindPairs[2].OutIndex != 2)
return SZ_ERROR_UNSUPPORTED;
return SZ_OK;
}
return SZ_ERROR_UNSUPPORTED;
}
static
UInt64 GetSum(const UInt64 *values, UInt32 index)
{
UInt64 sum = 0;
UInt32 i;
for (i = 0; i < index; i++)
sum += values[i];
return sum;
}
static
SRes SzDecode2(const UInt64 *packSizes, const CSzFolder *folder,
ILookInStream *inStream, UInt64 startPos,
Byte *outBuffer, SizeT outSize, ISzAlloc *allocMain,
Byte *tempBuf[])
{
UInt32 ci;
SizeT tempSizes[3] = { 0, 0, 0};
SizeT tempSize3 = 0;
Byte *tempBuf3 = 0;
RINOK(CheckSupportedFolder(folder));
for (ci = 0; ci < folder->NumCoders; ci++)
{
CSzCoderInfo *coder = &folder->Coders[ci];
if (coder->MethodID == k_Copy || coder->MethodID == k_LZMA)
{
UInt32 si = 0;
UInt64 offset;
UInt64 inSize;
Byte *outBufCur = outBuffer;
SizeT outSizeCur = outSize;
if (folder->NumCoders == 4)
{
UInt32 indices[] = { 3, 2, 0 };
UInt64 unpackSize = folder->UnpackSizes[ci];
si = indices[ci];
if (ci < 2)
{
Byte *temp;
outSizeCur = (SizeT)unpackSize;
if (outSizeCur != unpackSize)
return SZ_ERROR_MEM;
temp = (Byte *)IAlloc_Alloc(allocMain, outSizeCur);
if (temp == 0 && outSizeCur != 0)
return SZ_ERROR_MEM;
outBufCur = tempBuf[1 - ci] = temp;
tempSizes[1 - ci] = outSizeCur;
}
else if (ci == 2)
{
if (unpackSize > outSize) /* check it */
return SZ_ERROR_PARAM;
tempBuf3 = outBufCur = outBuffer + (outSize - (size_t)unpackSize);
tempSize3 = outSizeCur = (SizeT)unpackSize;
}
else
return SZ_ERROR_UNSUPPORTED;
}
offset = GetSum(packSizes, si);
inSize = packSizes[si];
RINOK(LookInStream_SeekTo(inStream, startPos + offset));
if (coder->MethodID == k_Copy)
{
if (inSize != outSizeCur) /* check it */
return SZ_ERROR_DATA;
RINOK(SzDecodeCopy(inSize, inStream, outBufCur));
}
else
{
RINOK(SzDecodeLzma(coder, inSize, inStream, outBufCur, outSizeCur, allocMain));
}
}
else if (coder->MethodID == k_BCJ)
{
UInt32 state;
if (ci != 1)
return SZ_ERROR_UNSUPPORTED;
x86_Convert_Init(state);
x86_Convert(outBuffer, outSize, 0, &state, 0);
}
else if (coder->MethodID == k_BCJ2)
{
UInt64 offset = GetSum(packSizes, 1);
UInt64 s3Size = packSizes[1];
SRes res;
if (ci != 3)
return SZ_ERROR_UNSUPPORTED;
RINOK(LookInStream_SeekTo(inStream, startPos + offset));
tempSizes[2] = (SizeT)s3Size;
if (tempSizes[2] != s3Size)
return SZ_ERROR_MEM;
tempBuf[2] = (Byte *)IAlloc_Alloc(allocMain, tempSizes[2]);
if (tempBuf[2] == 0 && tempSizes[2] != 0)
return SZ_ERROR_MEM;
res = SzDecodeCopy(s3Size, inStream, tempBuf[2]);
RINOK(res)
res = Bcj2_Decode(
tempBuf3, tempSize3,
tempBuf[0], tempSizes[0],
tempBuf[1], tempSizes[1],
tempBuf[2], tempSizes[2],
outBuffer, outSize);
RINOK(res)
}
else
return SZ_ERROR_UNSUPPORTED;
}
return SZ_OK;
}
SRes SzDecode(const UInt64 *packSizes, const CSzFolder *folder,
ILookInStream *inStream, UInt64 startPos,
Byte *outBuffer, size_t outSize, ISzAlloc *allocMain)
{
Byte *tempBuf[3] = { 0, 0, 0};
int i;
SRes res = SzDecode2(packSizes, folder, inStream, startPos,
outBuffer, (SizeT)outSize, allocMain, tempBuf);
for (i = 0; i < 3; i++)
IAlloc_Free(allocMain, tempBuf[i]);
return res;
}

View File

@@ -0,0 +1,13 @@
/* 7zDecode.h -- Decoding from 7z folder
2008-11-23 : Igor Pavlov : Public domain */
#ifndef __7Z_DECODE_H
#define __7Z_DECODE_H
#include "7zItem.h"
SRes SzDecode(const UInt64 *packSizes, const CSzFolder *folder,
ILookInStream *stream, UInt64 startPos,
Byte *outBuffer, size_t outSize, ISzAlloc *allocMain);
#endif

View File

@@ -0,0 +1,93 @@
/* 7zExtract.c -- Extracting from 7z archive
2008-11-23 : Igor Pavlov : Public domain */
#include "7zCrc.h"
#include "7zDecode.h"
#include "7zExtract.h"
SRes SzAr_Extract(
const CSzArEx *p,
ILookInStream *inStream,
UInt32 fileIndex,
UInt32 *blockIndex,
Byte **outBuffer,
size_t *outBufferSize,
size_t *offset,
size_t *outSizeProcessed,
ISzAlloc *allocMain,
ISzAlloc *allocTemp)
{
UInt32 folderIndex = p->FileIndexToFolderIndexMap[fileIndex];
SRes res = SZ_OK;
*offset = 0;
*outSizeProcessed = 0;
if (folderIndex == (UInt32)-1)
{
IAlloc_Free(allocMain, *outBuffer);
*blockIndex = folderIndex;
*outBuffer = 0;
*outBufferSize = 0;
return SZ_OK;
}
if (*outBuffer == 0 || *blockIndex != folderIndex)
{
CSzFolder *folder = p->db.Folders + folderIndex;
UInt64 unpackSizeSpec = SzFolder_GetUnpackSize(folder);
size_t unpackSize = (size_t)unpackSizeSpec;
UInt64 startOffset = SzArEx_GetFolderStreamPos(p, folderIndex, 0);
if (unpackSize != unpackSizeSpec)
return SZ_ERROR_MEM;
*blockIndex = folderIndex;
IAlloc_Free(allocMain, *outBuffer);
*outBuffer = 0;
RINOK(LookInStream_SeekTo(inStream, startOffset));
if (res == SZ_OK)
{
*outBufferSize = unpackSize;
if (unpackSize != 0)
{
*outBuffer = (Byte *)IAlloc_Alloc(allocMain, unpackSize);
if (*outBuffer == 0)
res = SZ_ERROR_MEM;
}
if (res == SZ_OK)
{
res = SzDecode(p->db.PackSizes +
p->FolderStartPackStreamIndex[folderIndex], folder,
inStream, startOffset,
*outBuffer, unpackSize, allocTemp);
if (res == SZ_OK)
{
if (folder->UnpackCRCDefined)
{
if (CrcCalc(*outBuffer, unpackSize) != folder->UnpackCRC)
res = SZ_ERROR_CRC;
}
}
}
}
}
if (res == SZ_OK)
{
UInt32 i;
CSzFileItem *fileItem = p->db.Files + fileIndex;
*offset = 0;
for (i = p->FolderStartFileIndex[folderIndex]; i < fileIndex; i++)
*offset += (UInt32)p->db.Files[i].Size;
*outSizeProcessed = (size_t)fileItem->Size;
if (*offset + *outSizeProcessed > *outBufferSize)
return SZ_ERROR_FAIL;
{
if (fileItem->FileCRCDefined)
{
if (CrcCalc(*outBuffer + *offset, *outSizeProcessed) != fileItem->FileCRC)
res = SZ_ERROR_CRC;
}
}
}
return res;
}

View File

@@ -0,0 +1,49 @@
/* 7zExtract.h -- Extracting from 7z archive
2008-11-23 : Igor Pavlov : Public domain */
#ifndef __7Z_EXTRACT_H
#define __7Z_EXTRACT_H
#include "7zIn.h"
#ifdef __cplusplus
extern "C" {
#endif
/*
SzExtract extracts file from archive
*outBuffer must be 0 before first call for each new archive.
Extracting cache:
If you need to decompress more than one file, you can send
these values from previous call:
*blockIndex,
*outBuffer,
*outBufferSize
You can consider "*outBuffer" as cache of solid block. If your archive is solid,
it will increase decompression speed.
If you use external function, you can declare these 3 cache variables
(blockIndex, outBuffer, outBufferSize) as static in that external function.
Free *outBuffer and set *outBuffer to 0, if you want to flush cache.
*/
SRes SzAr_Extract(
const CSzArEx *db,
ILookInStream *inStream,
UInt32 fileIndex, /* index of file */
UInt32 *blockIndex, /* index of solid block */
Byte **outBuffer, /* pointer to pointer to output buffer (allocated with allocMain) */
size_t *outBufferSize, /* buffer size for output buffer */
size_t *offset, /* offset of stream for required file in *outBuffer */
size_t *outSizeProcessed, /* size of file in *outBuffer */
ISzAlloc *allocMain,
ISzAlloc *allocTemp);
#ifdef __cplusplus
}
#endif
#endif

View File

@@ -0,0 +1,6 @@
/* 7zHeader.c -- 7z Headers
2008-10-04 : Igor Pavlov : Public domain */
#include "7zHeader.h"
Byte k7zSignature[k7zSignatureSize] = {'7', 'z', 0xBC, 0xAF, 0x27, 0x1C};

View File

@@ -0,0 +1,57 @@
/* 7zHeader.h -- 7z Headers
2008-10-04 : Igor Pavlov : Public domain */
#ifndef __7Z_HEADER_H
#define __7Z_HEADER_H
#include "Types.h"
#define k7zSignatureSize 6
extern Byte k7zSignature[k7zSignatureSize];
#define k7zMajorVersion 0
#define k7zStartHeaderSize 0x20
enum EIdEnum
{
k7zIdEnd,
k7zIdHeader,
k7zIdArchiveProperties,
k7zIdAdditionalStreamsInfo,
k7zIdMainStreamsInfo,
k7zIdFilesInfo,
k7zIdPackInfo,
k7zIdUnpackInfo,
k7zIdSubStreamsInfo,
k7zIdSize,
k7zIdCRC,
k7zIdFolder,
k7zIdCodersUnpackSize,
k7zIdNumUnpackStream,
k7zIdEmptyStream,
k7zIdEmptyFile,
k7zIdAnti,
k7zIdName,
k7zIdCTime,
k7zIdATime,
k7zIdMTime,
k7zIdWinAttributes,
k7zIdComment,
k7zIdEncodedHeader,
k7zIdStartPos,
k7zIdDummy
};
#endif

Some files were not shown because too many files have changed in this diff Show More