Added printed LED bezels.

Client code now calls dxf() so that the generated files can be used to speed up assembly views.

.gitignore

@@ -11,3 +11,4 @@ options.json
 times.txt
 *_diff.png
 *.echo
+cmd_times.txt

CHANGELOG.md

@@ -3,6 +3,218 @@
 This changelog is generated by `changelog.py` using manually added semantic version tags to classify commits as breaking changes, additions or fixes.
 
 
+#### [v20.15.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.15.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.15.0...v20.15.1 "diff with v20.15.0")
+*   2022-12-06 [`e256801`](https://github.com/nophead/NopSCADlib/commit/e256801206189eafcf020cc7fdb50fff4314c397 "show commit") [C.P.](# "Chris Palmer") Added comment to indicate the `.py` suffix may be needed on linux and OSX.
+
+### [v20.15.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.15.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.14.1...v20.15.0 "diff with v20.14.1")
+*   2022-12-05 [`9dc8062`](https://github.com/nophead/NopSCADlib/commit/9dc8062befa72c6650b17d34428bfe39e709fdc2 "show commit") [M.W.](# "Marek Wodzinski") Include `terminal.scad` in `lib.scad` to allow use of `terminal_block()`.
+
+#### [v20.14.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.14.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.14.0...v20.14.1 "diff with v20.14.0")
+*   2022-10-20 [`f2313a3`](https://github.com/nophead/NopSCADlib/commit/f2313a3f0ccbb130a7bd974b9a02f5ef6841f39e "show commit") [D.](# "drf5n") update `nuts.scad` table comment
+
+ * Change comment about nut sizes from radius to diameter.
+
+*   2022-09-29 [`d95e1e6`](https://github.com/nophead/NopSCADlib/commit/d95e1e64edba4ef51852a1e72d00497154c80c88 "show commit") [C.](# "Chris") Udated changelog.
+
+### [v20.14.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.14.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.13.0...v20.14.0 "diff with v20.13.0")
+*   2022-09-29 [`f1737d2`](https://github.com/nophead/NopSCADlib/commit/f1737d257b54957772ab6faea102f8ddb829119b "show commit") [C.](# "Chris") Updated images and readme.
+
+*   2022-09-27 [`ce258d6`](https://github.com/nophead/NopSCADlib/commit/ce258d6d4f1de5fbdda76a78b0ad2cbf1b41a3f9 "show commit") [J.R.](# "Jeroen Roos") Leadnuts: add nuthousing
+
+### [v20.13.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.13.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.12.0...v20.13.0 "diff with v20.12.0")
+*   2022-09-27 [`ec85cc5`](https://github.com/nophead/NopSCADlib/commit/ec85cc5d4c76baedae670a5652194bd1799a7094 "show commit") [C.](# "Chris") Updated images and readme.
+
+*   2022-09-24 [`fb66954`](https://github.com/nophead/NopSCADlib/commit/fb6695471f935057a0949e55f70a39911ac81f4c "show commit") [J.R.](# "Jeroen Roos") Shaft coupling: Add flexible SC `/` 6x8 flexible SC
+
+ * Added the possibility for shaft couplings to be flexible and added a 6x8
+example of such a coupling.
+
+### [v20.12.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.12.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.11.0...v20.12.0 "diff with v20.11.0")
+*   2022-09-27 [`c9ac393`](https://github.com/nophead/NopSCADlib/commit/c9ac393c0c7b025b3e6ad9e1030d1b13f8b879c3 "show commit") [C.](# "Chris") Printed corner blocks now have a `short_insert` option.
+
+*   2022-09-27 [`208334a`](https://github.com/nophead/NopSCADlib/commit/208334a585ed0605bf7dbaab1050c060aa15edb7 "show commit") [C.](# "Chris") Printed box now has a short insert option.
+
+*   2022-09-27 [`3a17b89`](https://github.com/nophead/NopSCADlib/commit/3a17b89d5ceb69834b23ff6bc46523f2dfb15f99 "show commit") [C.](# "Chris") Added short inserts and M5 inserts.
+`screw_insert()` now takes a short flag.
+`screw_length()` can now be passed an insert object.
+
+*   2022-09-25 [`0f36c02`](https://github.com/nophead/NopSCADlib/commit/0f36c02b5e34b0b45d258ff8e6ed4536f0601d92 "show commit") [C.](# "Chris") Added `layer_height0` global variable and updated `round_to_layer()` to handle it.
+
+ * Moved functions from `global_defs.scad` to `global.scad` so they get documented.
+
+### [v20.11.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.11.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.10.3...v20.11.0 "diff with v20.10.3")
+*   2022-08-30 [`c1e4625`](https://github.com/nophead/NopSCADlib/commit/c1e4625382646faf6a00e78ac01e495a88169b35 "show commit") [C.](# "Chris") Replaced generic chips with SOIC8.
+Updated images and readme.
+
+*   2022-08-29 [`6059c5f`](https://github.com/nophead/NopSCADlib/commit/6059c5f5569a9fc2ba08e448bbf90328fb985ed3 "show commit") [C.](# "ChemicalXandco") add L9110S 2-Channel motor driver module
+
+#### [v20.10.3](https://github.com/nophead/NopSCADlib/releases/tag/v20.10.3 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.10.2...v20.10.3 "diff with v20.10.2")
+*   2022-08-03 [`4ceb6bd`](https://github.com/nophead/NopSCADlib/commit/4ceb6bd8639cd39ac39798b3eccd178526a56c13 "show commit") [C.](# "Chris") Fixed a gap in printed hinges.
+
+#### [v20.10.2](https://github.com/nophead/NopSCADlib/releases/tag/v20.10.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.10.1...v20.10.2 "diff with v20.10.1")
+*   2022-07-16 [`664d04a`](https://github.com/nophead/NopSCADlib/commit/664d04ad93c28c2614d5991e2b8dfa78964f6a99 "show commit") [C.](# "Chris") Now logs the time taken to run non OpenSCAD commands in `cmd_times.txt`
+
+#### [v20.10.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.10.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.10.0...v20.10.1 "diff with v20.10.0")
+*   2022-06-30 [`f44d9ae`](https://github.com/nophead/NopSCADlib/commit/f44d9ae424f407baa4f8b5187819b43b30800257 "show commit") [M.B.](# "Martin Budden") Made includes relative in `bldc_motors`.
+
+*   2022-07-15 [`1238dba`](https://github.com/nophead/NopSCADlib/commit/1238dba90ac5c48ba01abb9e7926a064353489de "show commit") [C.](# "Chris") Updated readme.
+
+*   2022-06-22 [`aec7211`](https://github.com/nophead/NopSCADlib/commit/aec72118fac218ca033264fa7b28db2bff7db10a "show commit") [M.B.](# "Martin Budden") Fixed typos.
+
+### [v20.10.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.10.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.9.0...v20.10.0 "diff with v20.9.0")
+*   2022-07-04 [`b58a59d`](https://github.com/nophead/NopSCADlib/commit/b58a59dab70bb414dd90dc5a9055d6bf3b4f6144 "show commit") [C.](# "Chris") Updated images and readme.
+
+*   2022-07-04 [`6b6ffb2`](https://github.com/nophead/NopSCADlib/commit/6b6ffb2b74cc89ffecbcad7c304c3c4f047a8805 "show commit") [C.](# "Chris") Added SOICs to tests.
+
+*   2022-07-04 [`1e30ad2`](https://github.com/nophead/NopSCADlib/commit/1e30ad24e802dc6e075fd73185551202101d4793 "show commit") [C.](# "Chris") Added `smd_soic` to  `pcb_component()`.
+
+*   2022-07-04 [`dc715ff`](https://github.com/nophead/NopSCADlib/commit/dc715ff2b70ae98615ee43750f3bb7613b481f7b "show commit") [C.](# "Chris") Tweaked SOIC text size.
+
+*   2022-07-04 [`c57c202`](https://github.com/nophead/NopSCADlib/commit/c57c202e31c70351f38ef6299c60b0deb54bd296 "show commit") [M.](# "MS3FGX") Adjust lead sizing
+
+*   2022-07-02 [`26bfe96`](https://github.com/nophead/NopSCADlib/commit/26bfe96614741206c8da6d126edfa9eb5326cb8f "show commit") [M.](# "MS3FGX") Add SOIC SMD Package
+
+### [v20.9.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.9.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.8.0...v20.9.0 "diff with v20.8.0")
+*   2022-07-02 [`2cc3c6e`](https://github.com/nophead/NopSCADlib/commit/2cc3c6ec7c9d8ee285d49111559d40fb2a3112e1 "show commit") [C.](# "Chris") Updated images and readme.
+
+*   2022-07-02 [`633843d`](https://github.com/nophead/NopSCADlib/commit/633843d45eacd42619581a4619752700e1cd687b "show commit") [C.](# "Chris") Added LED1206 example to PCB test.
+
+*   2022-07-02 [`1a472c8`](https://github.com/nophead/NopSCADlib/commit/1a472c8ed549e230f7df93989f3e1db729b4b281 "show commit") [M.](# "MS3FGX") Add 1206 SMD LED
+
+### [v20.8.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.8.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.7.0...v20.8.0 "diff with v20.7.0")
+*   2022-06-23 [`ecd534b`](https://github.com/nophead/NopSCADlib/commit/ecd534b5773928b9987023bd4370f661cc750fbd "show commit") [C.P.](# "Chris Palmer") Added `NEMA_connection_pos()`.
+Changed motor wire colours and tweaked wire position and size,
+
+### [v20.7.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.7.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.6.1...v20.7.0 "diff with v20.6.1")
+*   2022-06-21 [`28c36a4`](https://github.com/nophead/NopSCADlib/commit/28c36a4e966cceccbbdc330cf9a6fdeaa0283889 "show commit") [C.P.](# "Chris Palmer") `rounded_polygon()` now copes with the degenerate case when tangents intersect to form a sharp corner with no arc.
+Added an `offset()` function with some limitations.
+
+#### [v20.6.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.6.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.6.0...v20.6.1 "diff with v20.6.0")
+*   2022-06-21 [`6a9af0a`](https://github.com/nophead/NopSCADlib/commit/6a9af0af8aef68978b8be248810d07c85150341b "show commit") [C.P.](# "Chris Palmer") Updates images
+
+*   2022-06-21 [`a6a0808`](https://github.com/nophead/NopSCADlib/commit/a6a08088d986dbcbc4d01c06e0475176ec8bc76f "show commit") [M.B.](# "Martin Budden") Fixed dimensions of E1515 extrusion.
+
+*   2022-06-21 [`bcf9fb3`](https://github.com/nophead/NopSCADlib/commit/bcf9fb38dfabaf93508a380b85b12e3b23f28cf8 "show commit") [M.B.](# "Martin Budden") Fixed typos.
+
+*   2022-06-21 [`06443a5`](https://github.com/nophead/NopSCADlib/commit/06443a558b407292a1e73f60c24cc90ec618d511 "show commit") [M.B.](# "Martin Budden") Standardised setting of imgsize in scripts.
+
+### [v20.6.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.6.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.5.1...v20.6.0 "diff with v20.5.1")
+*   2022-06-14 [`18f3d43`](https://github.com/nophead/NopSCADlib/commit/18f3d43780d7e083fc3b21290db2049fb4364a46 "show commit") [C.P.](# "Chris Palmer") Added convexity parameter to `clip()`.
+
+#### [v20.5.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.5.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.5.0...v20.5.1 "diff with v20.5.0")
+*   2022-06-14 [`eda88cc`](https://github.com/nophead/NopSCADlib/commit/eda88cc8d75eb4c0cb59b368b4e2ad3db2115834 "show commit") [C.P.](# "Chris Palmer") Fixed `vero()` constructor documentation.
+Fixed missing space in veroboard vitamin description.
+
+*   2022-06-14 [`630268d`](https://github.com/nophead/NopSCADlib/commit/630268d71a0b478c28b6bde2a7c3ff9074c7a8fb "show commit") [C.P.](# "Chris Palmer") Changed `screw_knob()` facets to be suitable for 3D printing.
+Fixed `knob_height()` so it can take a screw as a type.
+
+### [v20.5.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.5.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.4.0...v20.5.0 "diff with v20.4.0")
+*   2022-05-31 [`cc5654d`](https://github.com/nophead/NopSCADlib/commit/cc5654d7d756287f5311e35104003f38a4a94475 "show commit") [C.](# "Chris") Added `usb_miniA()`.
+
+### [v20.4.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.4.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.3.1...v20.4.0 "diff with v20.3.1")
+*   2022-04-01 [`d46913c`](https://github.com/nophead/NopSCADlib/commit/d46913ce4f64656889fd29dccc0709d84d4d9c49 "show commit") [C.P.](# "Chris Palmer") Printed `screw_knob()` is now fully customisable by passing a parameter
+list, constructed by `screw_knob(),` in place of the screw.
+
+ * Screws can still be passed for backwards compatibility.
+
+#### [v20.3.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.3.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.3.0...v20.3.1 "diff with v20.3.0")
+*   2022-04-01 [`b9f676a`](https://github.com/nophead/NopSCADlib/commit/b9f676a75369d666540f79abe0392e209e20d0f0 "show commit") [C.P.](# "Chris Palmer") Documented `insert_hole_length()`.
+
+### [v20.3.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.3.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.2.0...v20.3.0 "diff with v20.2.0")
+*   2022-03-17 [`ddc4150`](https://github.com/nophead/NopSCADlib/commit/ddc4150ed73c8300bc3ef4326a91cd4ec54ed9e3 "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
+
+*   2022-03-16 [`7e126c9`](https://github.com/nophead/NopSCADlib/commit/7e126c94cadd120d686eaad8459723e0c1dfc0b2 "show commit") [M.](# "Mozza") Add A23 cell
+
+### [v20.2.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.2.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.1.2...v20.2.0 "diff with v20.1.2")
+*   2022-03-17 [`744ebc2`](https://github.com/nophead/NopSCADlib/commit/744ebc293594e2d049220bba7325f3a22f40a71a "show commit") [C.P.](# "Chris Palmer") Added functions for generating twisted cable paths and calculating its radius.
+Top row of cable bundles reversed to match a twisted cable.
+
+#### [v20.1.2](https://github.com/nophead/NopSCADlib/releases/tag/v20.1.2 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.1.1...v20.1.2 "diff with v20.1.1")
+*   2022-03-17 [`99a5570`](https://github.com/nophead/NopSCADlib/commit/99a5570e248be32747bead61e17feaa3bde13f9b "show commit") [C.P.](# "Chris Palmer") Fixed ziptie bug for small wires and corners made sharper.
+
+*   2022-03-17 [`b70911d`](https://github.com/nophead/NopSCADlib/commit/b70911dc132727f24798e92be06a87ab37f2917e "show commit") [C.P.](# "Chris Palmer") Image odd pixel changes due to move to summer computer.
+
+*   2022-03-01 [`2d20fb1`](https://github.com/nophead/NopSCADlib/commit/2d20fb130a260b1f7358ea9fbb9fca2b5a18a65b "show commit") [C.P.](# "Chris Palmer") Removed dead code in `spiral_paths()`.
+
+#### [v20.1.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.1.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.1.0...v20.1.1 "diff with v20.1.0")
+*   2022-02-25 [`943deed`](https://github.com/nophead/NopSCADlib/commit/943deededfe2b258f23ca64001ae7c010ed626bc "show commit") [C.P.](# "Chris Palmer") Updated the readme.
+
+*   2022-02-24 [`c0d9067`](https://github.com/nophead/NopSCADlib/commit/c0d9067b740fc5ea4a41e696c88613a284685118 "show commit") [M.B.](# "Martin Budden") Fixed typos.
+
+*   2022-02-25 [`a30aff9`](https://github.com/nophead/NopSCADlib/commit/a30aff9613f51092bbad7052bfe1194a61557efc "show commit") [C.P.](# "Chris Palmer") Fixed missing brackets for sheets with chamfered corners.
+
+### [v20.1.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.1.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v20.0.1...v20.1.0 "diff with v20.0.1")
+*   2022-02-23 [`f173284`](https://github.com/nophead/NopSCADlib/commit/f173284709acdbd32de21f0d27cb3ab10b42eb2a "show commit") [C.P.](# "Chris Palmer") Can now inhibit exploded lines for issue [#220](https://github.com/nophead/NopSCADlib/issues/220 "show issue").
+
+#### [v20.0.1](https://github.com/nophead/NopSCADlib/releases/tag/v20.0.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v20.0.0...v20.0.1 "diff with v20.0.0")
+*   2022-02-23 [`0206b2e`](https://github.com/nophead/NopSCADlib/commit/0206b2e868119b3b5fdea6111839bf5055eae438 "show commit") [C.P.](# "Chris Palmer") Updated images.
+
+*   2022-02-03 [`1ac5a6f`](https://github.com/nophead/NopSCADlib/commit/1ac5a6f6cbe518646f19c4372a2393eb2e020a18 "show commit") [M.B.](# "Martin Budden") Made hard washers slightly lighter.
+This means they can be distinguished from bolts when viewed from directly
+above.
+
+## [v20.0.0](https://github.com/nophead/NopSCADlib/releases/tag/v20.0.0 "show release") Breaking Changes [...](https://github.com/nophead/NopSCADlib/compare/v19.21.0...v20.0.0 "diff with v19.21.0")
+*   2022-02-23 [`f8d17c6`](https://github.com/nophead/NopSCADlib/commit/f8d17c6f1615b9ff9b615ad2947c4b0119bf7597 "show commit") [C.P.](# "Chris Palmer") Updated readme.
+
+*   2022-02-22 [`662db2b`](https://github.com/nophead/NopSCADlib/commit/662db2bd4103dbeb4265c148d5f7e31c98d5dae2 "show commit") [M.B.](# "Martin Budden") Improved stepper motor naming convention.
+
+### [v19.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.20.0...v19.21.0 "diff with v19.20.0")
+*   2022-02-23 [`42fccc1`](https://github.com/nophead/NopSCADlib/commit/42fccc1afbf28ef6a94f0480d1306e5bc2e48e46 "show commit") [C.P.](# "Chris Palmer") Added `bezier_join()`.
+Moved `path_length()` from `sweep.scad` to `maths.scad`.
+
+### [v19.20.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.20.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.9.1...v19.20.0 "diff with v19.9.1")
+*   2022-02-15 [`0e2778e`](https://github.com/nophead/NopSCADlib/commit/0e2778e13de2e68fc21a7b4c706aada27a17842c "show commit") [C.P.](# "Chris Palmer") Cables can now have a list of wire colours.
+Added a constructor for cables.
+
+*   2022-02-15 [`50e23e5`](https://github.com/nophead/NopSCADlib/commit/50e23e5f818077e3661e25852dc959c34e6c8b4a "show commit") [C.P.](# "Chris Palmer") Added silkscreen text to PCBs.
+
+#### [v19.9.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.9.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.9.0...v19.9.1 "diff with v19.9.0")
+*   2022-02-15 [`59eeb2c`](https://github.com/nophead/NopSCADlib/commit/59eeb2c5d4c7cf9da1f219c2b01fabcf450085f3 "show commit") [C.P.](# "Chris Palmer") Trimmed the ribbon clamp tape.
+
+*   2022-02-15 [`7ea4dbe`](https://github.com/nophead/NopSCADlib/commit/7ea4dbe6cbbc23256d23f7aea87e8aac8d1000a9 "show commit") [C.P.](# "Chris Palmer") Fixed double application of `r2sides()` in `rounded_path()`.
+Added check for radius too big for corner in `rounded_path()`.
+Spiral paths can now have 0 twists.
+
+### [v19.9.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.9.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.8.1...v19.9.0 "diff with v19.8.1")
+*   2022-02-11 [`95b6771`](https://github.com/nophead/NopSCADlib/commit/95b6771811fd48af46b5c2d426c42c04cd8e5af3 "show commit") [C.P.](# "Chris Palmer") Added printed cable clips.
+
+*   2022-02-11 [`ed46cbb`](https://github.com/nophead/NopSCADlib/commit/ed46cbb1470587d4fa3ee4e0e8e0513c82693b1b "show commit") [C.P.](# "Chris Palmer") Fixed `cable_bundle()` bugs and added test.
+Added `cable_bundle_positions()`.
+Can now mark cables as ribbon to force a flat layout.
+
+#### [v19.8.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.8.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.8.0...v19.8.1 "diff with v19.8.0")
+*   2022-02-09 [`2a2b7d8`](https://github.com/nophead/NopSCADlib/commit/2a2b7d8bd60f0ea8ad2c428593e7aea1dfa06e9c "show commit") [C.P.](# "Chris Palmer") Added a second example project.
+
+### [v19.8.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.8.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.7.0...v19.8.0 "diff with v19.7.0")
+*   2022-02-09 [`055b4e7`](https://github.com/nophead/NopSCADlib/commit/055b4e7102ffcc39dc376330636efa79739a6555 "show commit") [C.P.](# "Chris Palmer") Added SOT23 and SOT223 SMD packages.
+`smd_capacitors` can now have a value.
+Wire links can now have zero length to create a vertical wire.
+
+*   2022-02-09 [`00d6efc`](https://github.com/nophead/NopSCADlib/commit/00d6efc3154bbd5597a3336bc8bdaf550e42f56a "show commit") [C.P.](# "Chris Palmer") Added veroboard constructor.
+Documented `solder_meniscus` and made it parametric.
+
+### [v19.7.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.7.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.6.0...v19.7.0 "diff with v19.6.0")
+*   2022-02-08 [`1f55097`](https://github.com/nophead/NopSCADlib/commit/1f55097bdd3e4d0164a48dd7ebb3fc5370250ac4 "show commit") [C.P.](# "Chris Palmer") Support for twisted cables.
+Sweep now distbutes twists in proportion to segments lengths.
+Added  `spiral_paths(),` `segmented_path()` and `rounded_path_vertices()` functions.
+Added `show_path(path)` module.
+
+### [v19.6.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.6.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.5.1...v19.6.0 "diff with v19.5.1")
+*   2022-02-06 [`225ea9b`](https://github.com/nophead/NopSCADlib/commit/225ea9b45160195bdf316e7ffdb383a63f898d3c "show commit") [C.P.](# "Chris Palmer") Added `rounded_path()` function to `sweep.scad`.
+
+#### [v19.5.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.5.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.5.0...v19.5.1 "diff with v19.5.0")
+*   2022-02-06 [`d341ce4`](https://github.com/nophead/NopSCADlib/commit/d341ce499e56972ff5267d3187387fe7df9d4130 "show commit") [C.P.](# "Chris Palmer") Added `render()` to `pocket_handle()`.
+
+*   2022-02-06 [`e7376e2`](https://github.com/nophead/NopSCADlib/commit/e7376e28c44355efa425b98aa0511ccdf0b63301 "show commit") [C.P.](# "Chris Palmer") Fixed corner block assembly names when overridden.
+
+*   2022-02-06 [`e238eaa`](https://github.com/nophead/NopSCADlib/commit/e238eaa473bac72136507d15c57f6156560d6cfe "show commit") [C.P.](# "Chris Palmer") Removed unused, undocumented function.
+
+### [v19.5.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.5.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.4.1...v19.5.0 "diff with v19.4.1")
+*   2022-02-01 [`04e94a8`](https://github.com/nophead/NopSCADlib/commit/04e94a859aa0d21f840c992b487a901f096790a4 "show commit") [C.P.](# "Chris Palmer") Added `earth_rot` parameter to `NEMA_screws()`.
+
+#### [v19.4.1](https://github.com/nophead/NopSCADlib/releases/tag/v19.4.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v19.4.0...v19.4.1 "diff with v19.4.0")
+*   2022-02-01 [`e696dc4`](https://github.com/nophead/NopSCADlib/commit/e696dc471845550eb94e1b648d8b109cc11a9bf1 "show commit") [C.P.](# "Chris Palmer") Fixed stupid bug in `euler()`.
+
 ### [v19.4.0](https://github.com/nophead/NopSCADlib/releases/tag/v19.4.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v19.3.0...v19.4.0 "diff with v19.3.0")
 *   2022-01-29 [`f33a067`](https://github.com/nophead/NopSCADlib/commit/f33a0675f5b9f6a5ebe1c4b9755e894d1e2b7994 "show commit") [C.P.](# "Chris Palmer") Updated images and readme.
 
@@ -313,8 +525,6 @@ Fixed `M6_cs_cap_screw` and `M4_grub_screw` socket sizes.
 #### [v15.21.1](https://github.com/nophead/NopSCADlib/releases/tag/v15.21.1 "show release") Fixes [...](https://github.com/nophead/NopSCADlib/compare/v15.21.0...v15.21.1 "diff with v15.21.0")
 *   2021-08-09 [`be53547`](https://github.com/nophead/NopSCADlib/commit/be53547728834d8e786ad4cb5637c768320a3105 "show commit") [M.B.](# "Martin Budden") Fixed display of BLDC prop shaft when thread length `=` 0.
 
-*   2021-07-04 [`ba7d7d3`](https://github.com/nophead/NopSCADlib/commit/ba7d7d32adf554d163143c0ae1707565340bb35b "show commit") [C.P.](# "Chris Palmer") Updated chnagelog.
-
 ### [v15.21.0](https://github.com/nophead/NopSCADlib/releases/tag/v15.21.0 "show release") Additions [...](https://github.com/nophead/NopSCADlib/compare/v15.20.0...v15.21.0 "diff with v15.20.0")
 *   2021-07-01 [`df35e14`](https://github.com/nophead/NopSCADlib/commit/df35e14fc71794c3826d6c99ce3cab93a4cfa5fe "show commit") [M.B.](# "Martin Budden") Improved handling of pcb plating colour.
 

docs/usage.md

@@ -28,6 +28,8 @@ by downloading https://github.com/nophead/NopSCADlib/archive/master.zip and unzi
 
 The `NopSCADlib/scripts` directory needs to be added to the executable search path, `PATH` on Windows and `path` on Linux and Mac.
 
+Note that on Linux and OSX the full file name including the `.py` will be needed.
+
 The installation can be tested by opening `NopSCADlib/libtest.scad` in the OpenSCAD GUI. It should render all the objects in the library in about 1 minute.
 
 Running `tests` from the command line will run all the tests in the `tests` directory and build the `readme.md` catalog for GitHub and render it to `readme.html`

examples/EnviroPlus/bom/RPI_assembly.txt

@@ -0,0 +1,5 @@
+RPI_assembly:
+Vitamins:
+  1 Micro SD card
+  1 Raspberry Pi Zero
+  1 Pin header 20 x 2 right_angle

examples/EnviroPlus/bom/RPI_case_assembly.txt

@@ -0,0 +1,7 @@
+RPI_case_assembly:
+Vitamins:
+  2 Screw M2.5 pan x  6.4mm
+
+Assemblies:
+  1 RPI_assembly
+  1 enviro_case_assembly

examples/EnviroPlus/bom/back_assembly.txt

@@ -0,0 +1,8 @@
+back_assembly:
+Vitamins:
+  1 Fan 17mm x 8mm
+  1 PMS5003 particle detector
+
+Printed:
+  1 enviro_plus_case_base.stl
+  1 fan_duct.stl

examples/EnviroPlus/bom/bom.csv

@@ -0,0 +1,21 @@
+'Micro SD card',  1
+'Fan 17mm x 8mm',  1
+'Heatfit insert M2',  4
+'Nut M2.5 x 2.2mm nyloc',  4
+'Enviro+',  1
+'Raspberry Pi Zero',  1
+'Pin header 20 x 2 right_angle',  1
+'PMS5003 particle detector',  1
+'Screw M2 cap x  6mm',  4
+'Screw M2.5 pan x  6.4mm',  2
+'Screw M2.5 pan x  8mm',  4
+'Screw M3 pan x  6mm',  3
+'SMD capacitor 1206 10uF',  1
+'SMD resistor 0805 3K3 0.125W',  1
+'SOT223 package FZT851',  1
+'Veroboard 6 holes x 6strips',  1
+'Washer  M2 x 5mm x 0.3mm',  4
+'Washer  M2.5 x 5.9mm x 0.5mm',  4
+'Washer  M3 x 7mm x 0.5mm',  3
+'Wire link 0.8mm x 6.5mm',  3
+'Wire link 0.8mm x 0.4"',  1

examples/EnviroPlus/bom/bom.json

@@ -0,0 +1,194 @@
+[
+    {
+        "name": "back_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "pms5003(): PMS5003 particle detector": {
+                "count": 1
+            },
+            "fan(fan17x8): Fan 17mm x 8mm": {
+                "count": 1
+            }
+        },
+        "printed": {
+            "fan_duct.stl": {
+                "count": 1,
+                "colour": "darkorange"
+            },
+            "enviro_plus_case_base.stl": {
+                "count": 1,
+                "colour": "grey"
+            }
+        },
+        "routed": {}
+    },
+    {
+        "name": "RPI_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "pcb(RPI0): Raspberry Pi Zero": {
+                "count": 1
+            },
+            ": Micro SD card": {
+                "count": 1
+            },
+            "pin_header(2p54header, 20, 2, right_angle = true): Pin header 20 x 2 right_angle": {
+                "count": 1
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "fan_controller_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "veroboard(fan_vb): Veroboard 6 holes x 6strips": {
+                "count": 1
+            },
+            "wire_link(0.8, 10.16, tail = 2.5): Wire link 0.8mm x 0.4\"": {
+                "count": 1
+            },
+            "wire_link(0.8, 0, h = 4, tail = 2.5): Wire link 0.8mm x 6.5mm": {
+                "count": 3
+            },
+            "smd_resistor(RES0805, 3K3): SMD resistor 0805 3K3 0.125W": {
+                "count": 1
+            },
+            "smd_capacitor(CAP1206): SMD capacitor 1206 10uF": {
+                "count": 1
+            },
+            "smd_sot(SOT223): SOT223 package FZT851": {
+                "count": 1
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "enviro_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "fan_controller_assembly": 1
+        },
+        "vitamins": {
+            "pcb(EnviroPlus): Enviro+": {
+                "count": 1
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "case_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {},
+        "vitamins": {
+            "insert(F1BM2): Heatfit insert M2": {
+                "count": 4
+            },
+            "washer(M3_washer): Washer  M3 x 7mm x 0.5mm": {
+                "count": 3
+            },
+            "screw(M3_pan_screw, 6): Screw M3 pan x  6mm": {
+                "count": 3
+            }
+        },
+        "printed": {
+            "enviro_plus_case.stl": {
+                "count": 1,
+                "colour": "grey"
+            },
+            "bulkhead.stl": {
+                "count": 1,
+                "colour": "[0.862745, 0.0784314, 0.235294]"
+            },
+            "foot.stl": {
+                "count": 3,
+                "colour": "darkorange"
+            }
+        },
+        "routed": {}
+    },
+    {
+        "name": "enviro_case_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "case_assembly": 1,
+            "enviro_assembly": 1
+        },
+        "vitamins": {
+            "screw(M2p5_pan_screw, 8): Screw M2.5 pan x  8mm": {
+                "count": 4
+            },
+            "washer(M2p5_washer): Washer  M2.5 x 5.9mm x 0.5mm": {
+                "count": 4
+            },
+            "nut(M2p5_nut, nyloc = true): Nut M2.5 x 2.2mm nyloc": {
+                "count": 4
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "RPI_case_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "enviro_case_assembly": 1,
+            "RPI_assembly": 1
+        },
+        "vitamins": {
+            "screw(M2p5_pan_screw, 6.4): Screw M2.5 pan x  6.4mm": {
+                "count": 2
+            }
+        },
+        "printed": {},
+        "routed": {}
+    },
+    {
+        "name": "main_assembly",
+        "big": null,
+        "ngb": false,
+        "zoomed": 0,
+        "count": 1,
+        "assemblies": {
+            "RPI_case_assembly": 1,
+            "back_assembly": 1
+        },
+        "vitamins": {
+            "washer(M2_washer): Washer  M2 x 5mm x 0.3mm": {
+                "count": 4
+            },
+            "screw(M2_cap_screw, 6): Screw M2 cap x  6mm": {
+                "count": 4
+            }
+        },
+        "printed": {},
+        "routed": {}
+    }
+]

examples/EnviroPlus/bom/bom.txt

@@ -0,0 +1,53 @@
+Vitamins:
+                   F   
+                   a   
+                   n   
+                E      
+                n  c   
+                v  o   
+    R           i  n   
+    p           r  t   
+    i        E  o  r   
+             n     o   
+    c  B  C  v  c  l  M
+ R  a  a  a  i  a  l  a
+ p  s  c  s  r  s  e  i
+ i  e  k  e  o  e  r  n
+ 1|  |  |  |  |  |  |  |  1 Micro SD card
+  |  | 1|  |  |  |  |  |  1 Fan 17mm x 8mm
+  |  |  | 4|  |  |  |  |  4 Heatfit insert M2
+  |  |  |  |  | 4|  |  |  4 Nut M2.5 x 2.2mm nyloc
+  |  |  |  | 1|  |  |  |  1 Enviro+
+ 1|  |  |  |  |  |  |  |  1 Raspberry Pi Zero
+ 1|  |  |  |  |  |  |  |  1 Pin header 20 x 2 right_angle
+  |  | 1|  |  |  |  |  |  1 PMS5003 particle detector
+  |  |  |  |  |  |  | 4|  4 Screw M2 cap x  6mm
+  | 2|  |  |  |  |  |  |  2 Screw M2.5 pan x  6.4mm
+  |  |  |  |  | 4|  |  |  4 Screw M2.5 pan x  8mm
+  |  |  | 3|  |  |  |  |  3 Screw M3 pan x  6mm
+  |  |  |  |  |  | 1|  |  1 SMD capacitor 1206 10uF
+  |  |  |  |  |  | 1|  |  1 SMD resistor 0805 3K3 0.125W
+  |  |  |  |  |  | 1|  |  1 SOT223 package FZT851
+  |  |  |  |  |  | 1|  |  1 Veroboard 6 holes x 6strips
+  |  |  |  |  |  |  | 4|  4 Washer  M2 x 5mm x 0.3mm
+  |  |  |  |  | 4|  |  |  4 Washer  M2.5 x 5.9mm x 0.5mm
+  |  |  | 3|  |  |  |  |  3 Washer  M3 x 7mm x 0.5mm
+  |  |  |  |  |  | 3|  |  3 Wire link 0.8mm x 6.5mm
+  |  |  |  |  |  | 1|  |  1 Wire link 0.8mm x 0.4"
+
+Printed:
+  |  |  | 1|  |  |  |  |  1 bulkhead.stl
+  |  |  | 1|  |  |  |  |  1 enviro_plus_case.stl
+  |  | 1|  |  |  |  |  |  1 enviro_plus_case_base.stl
+  |  | 1|  |  |  |  |  |  1 fan_duct.stl
+  |  |  | 3|  |  |  |  |  3 foot.stl
+
+Assemblies:
+  1 RPI_assembly
+  1 RPI_case_assembly
+  1 back_assembly
+  1 case_assembly
+  1 enviro_assembly
+  1 enviro_case_assembly
+  1 fan_controller_assembly
+  1 main_assembly

examples/EnviroPlus/bom/case_assembly.txt

@@ -0,0 +1,10 @@
+case_assembly:
+Vitamins:
+  4 Heatfit insert M2
+  3 Screw M3 pan x  6mm
+  3 Washer  M3 x 7mm x 0.5mm
+
+Printed:
+  1 bulkhead.stl
+  1 enviro_plus_case.stl
+  3 foot.stl

examples/EnviroPlus/bom/enviro_assembly.txt

@@ -0,0 +1,6 @@
+enviro_assembly:
+Vitamins:
+  1 Enviro+
+
+Assemblies:
+  1 fan_controller_assembly

examples/EnviroPlus/bom/enviro_case_assembly.txt

@@ -0,0 +1,9 @@
+enviro_case_assembly:
+Vitamins:
+  4 Nut M2.5 x 2.2mm nyloc
+  4 Screw M2.5 pan x  8mm
+  4 Washer  M2.5 x 5.9mm x 0.5mm
+
+Assemblies:
+  1 case_assembly
+  1 enviro_assembly

examples/EnviroPlus/bom/fan_controller_assembly.txt

@@ -0,0 +1,8 @@
+fan_controller_assembly:
+Vitamins:
+  1 SMD capacitor 1206 10uF
+  1 SMD resistor 0805 3K3 0.125W
+  1 SOT223 package FZT851
+  1 Veroboard 6 holes x 6strips
+  3 Wire link 0.8mm x 6.5mm
+  1 Wire link 0.8mm x 0.4"

examples/EnviroPlus/bom/main_assembly.txt

@@ -0,0 +1,8 @@
+main_assembly:
+Vitamins:
+  4 Screw M2 cap x  6mm
+  4 Washer  M2 x 5mm x 0.3mm
+
+Assemblies:
+  1 RPI_case_assembly
+  1 back_assembly

examples/EnviroPlus/readme.md

@@ -0,0 +1,298 @@
+<a name="TOP"></a>
+# EnviroPlus
+Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
+
+![Main Assembly](assemblies/main_assembled.png)
+
+<span></span>
+
+---
+## Table of Contents
+1. [Parts list](#Parts_list)
+1. [Back Assembly](#back_assembly)
+1. [RPI Assembly](#RPI_assembly)
+1. [Fan Controller Assembly](#fan_controller_assembly)
+1. [Enviro Assembly](#enviro_assembly)
+1. [Case Assembly](#case_assembly)
+1. [Enviro Case Assembly](#enviro_case_assembly)
+1. [RPI Case Assembly](#RPI_case_assembly)
+1. [Main Assembly](#main_assembly)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="Parts_list"></a>
+## Parts list
+| <span style="writing-mode: vertical-rl; text-orientation: mixed;">Back</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">RPI</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Fan&nbsp;Controller</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Enviro</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Case</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Enviro&nbsp;Case</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">RPI&nbsp;Case</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">Main</span> | <span style="writing-mode: vertical-rl; text-orientation: mixed;">TOTALS</span> |  |
+|---:|---:|---:|---:|---:|---:|---:|---:|---:|:---|
+|  |  |  |  |  |  |  |  | | **Vitamins** |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Enviro+ |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Fan 17mm x 8mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Heatfit insert M2 |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Micro SD card |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Nut M2.5 x 2.2mm nyloc |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; PMS5003 particle detector |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Pin header 20 x 2 right_angle |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Raspberry Pi Zero |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; SMD capacitor 1206 10uF |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; SMD resistor 0805 3K3 0.125W |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; SOT223 package FZT851 |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Screw M2 cap x  6mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp; Screw M2.5 pan x  6.4mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Screw M2.5 pan x  8mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp; Screw M3 pan x  6mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Veroboard 6 holes x 6strips |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Washer  M2 x 5mm x 0.3mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;4&nbsp; | &nbsp;&nbsp; Washer  M2.5 x 5.9mm x 0.5mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp; Washer  M3 x 7mm x 0.5mm |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp; Wire link 0.8mm x 0.4" |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp; Wire link 0.8mm x 6.5mm |
+| &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;8&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;10&nbsp; | &nbsp;&nbsp;12&nbsp; | &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;8&nbsp; | &nbsp;&nbsp;46&nbsp; | &nbsp;&nbsp;Total vitamins count |
+|  |  |  |  |  |  |  |  | | **3D printed parts** |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;bulkhead.stl |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;enviro_plus_case.stl |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;enviro_plus_case_base.stl |
+| &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;1&nbsp; | &nbsp;&nbsp;fan_duct.stl |
+| &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; |  &nbsp;&nbsp;3&nbsp; | &nbsp;&nbsp;foot.stl |
+| &nbsp;&nbsp;2&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;5&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;.&nbsp; | &nbsp;&nbsp;7&nbsp; | &nbsp;&nbsp;Total 3D printed parts count |
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="back_assembly"></a>
+## Back Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| Fan 17mm x 8mm|
+|1| PMS5003 particle detector|
+
+
+### 3D Printed parts
+
+| 1 x enviro_plus_case_base.stl | 1 x fan_duct.stl |
+|---|---|
+| ![enviro_plus_case_base.stl](stls/enviro_plus_case_base.png) | ![fan_duct.stl](stls/fan_duct.png) 
+
+
+
+### Assembly instructions
+![back_assembly](assemblies/back_assembly.png)
+
+1. Print the fan duct in flexible TPE with low infill.
+1. Slide the pms5003 into the printed receptacle with the fan to the outside. Secure with tape if it is loose.
+1. Slide the fan into the fan duct.
+1. Slide the fan duct into the printed recepacle.
+
+![back_assembled](assemblies/back_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="RPI_assembly"></a>
+## RPI Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| Micro SD card|
+|1| Pin header 20 x 2 right_angle|
+|1| Raspberry Pi Zero|
+
+
+### Assembly instructions
+![RPI_assembly](assemblies/RPI_assembly_tn.png)
+
+* Solder a right angle connector to the Raspberry Pi Zero.
+
+![RPI_assembled](assemblies/RPI_assembled_tn.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="fan_controller_assembly"></a>
+## Fan Controller Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| SMD capacitor 1206 10uF|
+|1| SMD resistor 0805 3K3 0.125W|
+|1| SOT223 package FZT851|
+|1| Veroboard 6 holes x 6strips|
+|1| Wire link 0.8mm x 0.4"|
+|3| Wire link 0.8mm x 6.5mm|
+
+
+### Assembly instructions
+![fan_controller_assembly](assemblies/fan_controller_assembly_tn.png)
+
+The fan controller is a single transistor wired as a Miller integrator that effectively multiplies the capacitor value by the gain of the transistor.
+It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't whine, or stutter.
+
+![Schematic](docs/fan_controller.jpg)
+
+***
+* Make two track cuts as shown, one wide and the other narrow.
+
+![TrackCuts](docs/cuts.jpg)
+
+1. Add the SMT compeonents and then the wire links.
+1. Add more solder around the transistor to act as a heatsink.
+
+![SMT](docs/smt.jpg)
+
+
+![fan_controller_assembled](assemblies/fan_controller_assembled_tn.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="enviro_assembly"></a>
+## Enviro Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|1| Enviro+|
+
+
+### Sub-assemblies
+
+| 1 x fan_controller_assembly |
+|---|
+| ![fan_controller_assembled](assemblies/fan_controller_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![enviro_assembly](assemblies/enviro_assembly_tn.png)
+
+* Solder the fan_controller to the Enviro+ expansion connector at the 5V, GND and #4 pins.
+
+![enviro_assembled](assemblies/enviro_assembled_tn.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="case_assembly"></a>
+## Case Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|4| Heatfit insert M2|
+|3| Screw M3 pan x  6mm|
+|3| Washer  M3 x 7mm x 0.5mm|
+
+
+### 3D Printed parts
+
+| 1 x bulkhead.stl | 1 x enviro_plus_case.stl | 3 x foot.stl |
+|---|---|---|
+| ![bulkhead.stl](stls/bulkhead.png) | ![enviro_plus_case.stl](stls/enviro_plus_case.png) | ![foot.stl](stls/foot.png) 
+
+
+
+### Assembly instructions
+![case_assembly](assemblies/case_assembly.png)
+
+1. Solvent weld or glue the bulkhead into the recess in the bottom of the case.
+1. Fit the heatfit inserts with a soldering iron with a conical bit heated to about 200&deg;C.
+1. Tap the three holes for the feet with an M3 tap.
+1. Screw on the three feet with M3 x 6mm pan screws and washers.
+
+![case_assembled](assemblies/case_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="enviro_case_assembly"></a>
+## Enviro Case Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|4| Nut M2.5 x 2.2mm nyloc|
+|4| Screw M2.5 pan x  8mm|
+|4| Washer  M2.5 x 5.9mm x 0.5mm|
+
+
+### Sub-assemblies
+
+| 1 x case_assembly | 1 x enviro_assembly |
+|---|---|
+| ![case_assembled](assemblies/case_assembled_tn.png) | ![enviro_assembled](assemblies/enviro_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![enviro_case_assembly](assemblies/enviro_case_assembly.png)
+
+* Screw the Enviro+ PCB to the front of the case using M2.5 x 8mm pan screws with washer and nuts on the inside.
+
+![enviro_case_assembled](assemblies/enviro_case_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="RPI_case_assembly"></a>
+## RPI Case Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|2| Screw M2.5 pan x  6.4mm|
+
+
+### Sub-assemblies
+
+| 1 x RPI_assembly | 1 x enviro_case_assembly |
+|---|---|
+| ![RPI_assembled](assemblies/RPI_assembled_tn.png) | ![enviro_case_assembled](assemblies/enviro_case_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![RPI_case_assembly](assemblies/RPI_case_assembly.png)
+
+* Plug the RPi into the Enviro+ socket and secure with two screws self tapped into the bosses in the case.
+
+![RPI_case_assembled](assemblies/RPI_case_assembled.png)
+
+<span></span>
+[Top](#TOP)
+
+---
+<a name="main_assembly"></a>
+## Main Assembly
+### Vitamins
+|Qty|Description|
+|---:|:----------|
+|4| Screw M2 cap x  6mm|
+|4| Washer  M2 x 5mm x 0.3mm|
+
+
+### Sub-assemblies
+
+| 1 x RPI_case_assembly | 1 x back_assembly |
+|---|---|
+| ![RPI_case_assembled](assemblies/RPI_case_assembled_tn.png) | ![back_assembled](assemblies/back_assembled_tn.png) 
+
+
+
+### Assembly instructions
+![main_assembly](assemblies/main_assembly.png)
+
+* Solder the fan wires to the veroboard assembly
+
+![FanWires](docs/fan_connection.jpg)
+
+* Slide the back assembly into the case and secure with four M2 x 6mm cap screws and washers.
+
+![main_assembled](assemblies/main_assembled.png)
+
+<span></span>
+[Top](#TOP)

examples/EnviroPlus/scad/fan_controller.scad

@@ -0,0 +1,45 @@
+//
+//! Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
+//
+// GNU GPL v2
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// Top level model
+//
+
+include <NopSCADlib/core.scad>
+use <NopSCADlib/vitamins/veroboard.scad>
+include <NopSCADlib/vitamins/smds.scad>
+
+fan_vb = vero("fan_vb", "fan_controller", 6, 6, breaks = [[2, 1], [2 + eps, 5]],
+    components = [
+        [5, 3,    90, "link", inch(0.4), undef, undef, 2.5],
+        [0, 5,     0, "link", 0, 4, undef, 2.5],
+        [0, 1,     0, "link", 0, 4, undef, 2.5],
+        [0, 0,     0, "link", 0, 4, undef, 2.5],
+        [2, 5,     0, "-smd_res", RES0805, "3K3"],
+        [4, 4.7,  90, "-smd_cap", CAP1206, 1.2, "10uF"],
+        [2, 2.5, 180, "-smd_sot", SOT223, "FZT851"],
+    ],
+    joints = [[5, 1], [5, 5], [0, [0, 1, 5]]]
+ );
+
+//! The fan controller is a single transistor wired as a Miller integrator that effectively multiplies the capacitor value by the gain of the transistor.
+//! It converts the PWM signal on GPI4 to a stead DC voltage so that the fan doesn't whine, or stutter.
+//!
+//! ![Schematic](docs/fan_controller.jpg)
+//!
+//! ***
+//! * Make two track cuts as shown, one wide and the other narrow.
+//!
+//! ![TrackCuts](docs/cuts.jpg)
+//!
+//! 1. Add the SMT compeonents and then the wire links.
+//! 1. Add more solder around the transistor to act as a heatsink.
+//!
+//! ![SMT](docs/smt.jpg)
+//!
+module fan_controller_assembly() rotate(90) vflip(!exploded()) veroboard_assembly(fan_vb, -vero_thickness(fan_vb) - 1.4, 0);
+
+fan_controller_assembly();

examples/EnviroPlus/scad/main.scad

@@ -0,0 +1,518 @@
+//
+//! Environmental monitor using Enviro+ sensor board and a Raspberry Pi Zero.
+//
+// GNU GPL v2
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// Top level model
+//
+$explode = 0; // [0, 1]
+assembly = "main"; // [main, back, RPI, case, enviro_case, RPI_case]
+
+/* [Hidden] */
+
+show_box = true;
+show_enviroplus = true;
+$pp1_colour = "grey";
+$extrusion_width = 0.5;
+
+include <NopSCADlib/core.scad>
+include <NopSCADlib/vitamins/pin_headers.scad>
+include <NopSCADlib/vitamins/pcbs.scad>
+include <NopSCADlib/vitamins/fans.scad>
+
+use <NopSCADlib/vitamins/insert.scad>
+use <NopSCADlib/vitamins/veroboard.scad>
+use <NopSCADlib/utils/round.scad>
+use <NopSCADlib/printed/foot.scad>
+use <NopSCADlib/printed/printed_box.scad>
+use <fan_controller.scad>
+
+rpi = RPI0;
+pcb = EnviroPlus;
+fan = fan17x8;
+foot = Foot(d = 13, h = 5, t = 2, r = 1, screw = M3_pan_screw);
+module foot_stl() foot(foot);
+
+rpi_offset = [0, -pcb_width(pcb) / 2 + 0.5, pcb_width(rpi) / 2 + 8.6];
+rpi_holes = [0, 1];
+wall = 2;
+top_thickness = 2;
+base_thickness = 2;
+case_inner_rad = 8;
+
+width = pcb_length(pcb) + 9 + 10;
+pcb_x = -(width - pcb_length(pcb) - 9) / 2;
+depth = pcb_width(pcb) + 9;
+height = pcb_width(rpi) / 2 + rpi_offset.z + 9;
+bulkhead_outset = 2;
+bulkhead_inset = 0.5;
+bulkhead_t = 2;
+clearance = 0.1;
+pcb_screw = alternate_screw(hs_pan, pcb_screw(pcb));
+
+box = pbox(name = "enviro_plus_case", wall = wall, top_t = top_thickness, base_t = base_thickness, screw = M2_cap_screw, radius = case_inner_rad, ridges = [8, 1],
+    size = [width,  depth, height]);
+
+pms5003 = [50, 38, 21];
+pms5003_wall = 1;
+pms5003_pos = [width / 2 - pms5003.x / 2 - pms5003_wall - pbox_screw_inset(box) - insert_boss_radius(screw_insert(pbox_screw(box)), wall) - 0.5,
+               depth / 2 - pms5003.z / 2 - wall - 1,
+               height + top_thickness - pms5003.y / 2];
+
+
+fan_duct_t = 1.7;
+foam_t = 0;
+fan_pos = [pms5003_pos.x - pms5003.x / 2 - pms5003_wall - fan_width(fan) / 2 - fan_duct_t, 1 + foam_t, 12 + top_thickness + fan_depth(fan) / 2];
+fan_socket = 8;
+
+module fan_shape() {
+    w = fan_width(fan);
+    p = fan_hole_pitch(fan);
+    r = w / 2 - p;
+
+    rounded_square([w, w], r);
+}
+
+module fan_duct_stl() {
+    module frame(z, offset, y = -fan_pos.y)
+        translate([0, y, z])
+            linear_extrude(height = eps)
+                offset(offset)
+                    fan_shape();
+
+    z = height + top_thickness - fan_pos.z + fan_depth(fan) / 2 - fan_socket;
+
+    translate([0, -fan_pos.y, z])
+        linear_extrude(height = fan_socket)
+            difference() {
+                fan_shape();
+
+                round(1)
+                    offset(-fan_duct_t)
+                        fan_shape();
+            }
+
+    stl("fan_duct") union() {
+        difference() {
+            hull() {
+                frame(z, 0);
+
+                frame(fan_depth(fan), fan_duct_t + foam_t, 0);
+            }
+            hull() {
+                frame(z, -fan_duct_t);
+
+                frame(fan_depth(fan), foam_t -extrusion_width / 2, 0);
+            }
+        }
+
+        linear_extrude(height = fan_depth(fan))
+            difference() {
+                offset(fan_duct_t + foam_t)
+                    fan_shape();
+
+                offset(foam_t)
+                    fan_shape();
+            }
+    }
+}
+
+module pms5003() {
+    vitamin("pms5003(): PMS5003 particle detector");
+
+    w = pms5003.x;
+    d = pms5003.y;
+    h = pms5003.z;
+    t = 0.1;
+    color("silver")
+        difference() {
+            linear_extrude(height = h, center = true)
+                difference() {
+                    square([w, d], center = true);
+
+                    for(x = [-1, 1], y = [-1, 1])
+                        translate([x * w / 2, y * d / 2])
+                            square(2, center = true);
+                }
+            cube([w + 2 * eps, d + 2 * eps, t * 2], center = true);
+         }
+
+    color("black")
+        rounded_rectangle([w - 2 * t, d - 2 * t, h - 2 * t], r = 1, center = true);
+}
+
+module pcb_shape(offset)
+    rounded_square([pcb_length(pcb) + 2 * offset, pcb_width(pcb) + 2 * offset], pcb_radius(pcb) + offset);
+
+module gap() {
+    gap = pcb_component_position(pcb, "-chip");
+
+    translate([gap.x, -gap.y])
+        square([17.5, 20], center = true);
+}
+
+module rpi_holes()
+    for(i = rpi_holes) {
+        hole = pcb_coord(rpi, pcb_holes(rpi)[i]);
+        translate([hole.x, rpi_offset.y, -hole.y + rpi_offset.z + top_thickness])
+            rotate([90, 0, 0])
+                children();
+    }
+
+module feet_positions() {
+    clearance = 2;
+    foot_r = foot_diameter(foot) / 2;
+    x_inset = case_inner_rad + foot_r - pbox_ridges(box).y;
+    z_inset = foot_r + clearance;
+    h = height + base_thickness;
+
+    for(p = [[-1, -1], [1, -1], [0, 1]])
+        translate([p.x * (width / 2 - x_inset), depth / 2 + wall + pbox_ridges(box).y, top_thickness + h / 2 + p.y * (h / 2 - z_inset)])
+            rotate([90, 0, 0])
+                children();
+}
+
+module slots(h = 10, expand = 0) {
+    for(comp = [["uSD", 2, 11, 0.7], ["flat_flex", 1, 12, 0.5]]) {
+        p = pcb_component_position(rpi, comp[0]);
+        translate([sign(p.x) * (width / 2 + wall / 2 + pbox_ridges(box).y / 2), rpi_offset.y + pcb_thickness(rpi) + comp[3], top_thickness + rpi_offset.z - p.y])
+            rotate([90, 0, 90])
+                hull() {
+                    vertical_tearslot(r = comp[1] + expand, l = comp[2], h = h);
+
+                    if(expand)
+                         vertical_tearslot(r = comp[1] + expand + h / 2, l = comp[2], h = eps);
+                }
+     }
+}
+
+module box_internal_additions() {
+    translate([pcb_x, 0]) {
+        linear_extrude(height = top_thickness + bulkhead_t)
+            difference() {
+                pcb_shape(bulkhead_outset + wall + pbox_ridges(box).y + eps);
+
+                gap();
+
+                pcb_shape(bulkhead_outset + clearance);
+            }
+
+        rpi_holes()
+            hull() {
+                wall = 1.8;
+                r =  screw_radius(pcb_screw) + wall;
+                z = depth / 2 + rpi_offset.y + pbox_ridges(box).y + eps;
+                offset = max(r, z);
+                cylinder(r =r, h = z);
+
+                translate([0, -offset - r, z])
+                    cube(eps);
+            }
+    }
+    d = washer_diameter(screw_washer(foot_screw(foot))) + 1;
+    h = pbox_ridges(box).y;
+    feet_positions()
+        translate_z(wall - eps)
+            cylinder(d2 = d, d1 = d + 2 * h, h = h);
+
+    slots(wall + pbox_ridges(box).y + eps, 1);
+}
+
+module box_external_additions() {
+    amp = pbox_ridges(box).y + eps;
+    d = foot_diameter(foot) + 1;
+    feet_positions()
+        cylinder(d1 = d, d2 = d + 2 * amp, h = amp);
+
+    slots(wall + pbox_ridges(box).y + eps, 1);
+}
+
+
+module box_holes() {
+    translate([pcb_x, 0]) {
+        linear_extrude(height = top_thickness + eps)
+            pcb_shape(clearance);
+
+        rpi_holes()
+            teardrop_plus(r = screw_pilot_hole(pcb_screw), h = 7 - 1.6, center = false);
+    }
+    feet_positions()
+        teardrop(r = screw_pilot_hole(foot_screw(foot)), h = 10, center = true);
+
+    grills = 7;
+    bar = 1.6;
+    x = pcb_x + pcb_length(pcb) / 2 + 2 * wall +  pbox_ridges(box).y + 2 * eps;
+    w = width / 2 - x;
+    d = depth - case_inner_rad;
+    pitch = d / (grills - 1);
+    for(i = [0 : grills -1])
+        let(w = i == 0 || i == grills -1 ? w - 1 : w)
+            translate([x + w / 2, -d / 2 + i * pitch])
+                rounded_rectangle([w, pitch - bar, 10], 1);
+
+    slots();
+}
+
+module bulkhead_stl() {
+    holes = pcb_holes(pcb);
+    pitch = max([for(h = holes) pcb_coord(pcb, h).x]) - min([for(h = holes)  pcb_coord(pcb, h).x]);
+    boss_r = (pitch - 51.4) / 2;
+
+    stl("bulkhead")
+        linear_extrude(height = bulkhead_t)
+            difference() {
+                pcb_shape(bulkhead_outset);
+
+                gap();
+
+                difference() {
+                    pcb_shape(-bulkhead_inset);
+
+                    pcb_screw_positions(pcb)
+                        rotate($i * 90)
+                            hull() {
+                                circle(boss_r);
+
+                                translate([boss_r - eps, -boss_r])
+                                    square([eps, boss_r]);
+
+                                translate([-boss_r, boss_r - eps])
+                                    square([boss_r, eps]);
+
+                                translate([-boss_r, -boss_r])
+                                    square(eps);
+                            }
+                }
+
+                pcb_screw_positions(pcb)
+                    poly_circle(screw_clearance_radius(pcb_screw));
+            }
+}
+
+module enviro_plus_case_stl() {
+     pbox(box) {
+        box_internal_additions();
+        box_holes();
+        box_external_additions();
+     }
+}
+
+module base_additions() {
+    w = pms5003.x + clearance;
+    d = pms5003.z + clearance;
+    wall = pms5003_wall;
+
+    translate([pms5003_pos.x, -pms5003_pos.y])
+        linear_extrude(height = base_thickness + pms5003.y)
+            difference() {
+                square([w + 2 * wall, d + 2 * wall], center = true);
+                square([w, d], center = true);
+            }
+
+    translate([fan_pos.x, 0])
+        linear_extrude(height = top_thickness + fan_socket)
+            difference() {
+                offset(wall)
+                    fan_shape();
+
+                fan_shape();
+            }
+}
+
+module base_holes() {
+    for(i = [0 : 1]) {
+        p = pcb_component_position(rpi, "usb_uA", i);
+        translate([p.x + pcb_x, -rpi_offset.y - pcb_thickness(rpi) - 1.3])
+            rounded_rectangle([11,7, 100], 0.5, true);
+    }
+
+    translate([pms5003_pos.x, -pms5003_pos.y])
+        rounded_rectangle([pms5003.x - 2 ,pms5003.z - 2, 100], 2, true);
+
+    translate([fan_pos.x, 0])
+        linear_extrude(height = 2 * base_thickness + eps, center = true)
+            round(1)
+                offset(-fan_duct_t)
+                    fan_shape();
+}
+
+module enviro_plus_case_base_stl()
+    pbox_base(box) {
+        base_additions();
+        base_holes();
+    }
+
+//! * Solder a right angle connector to the Raspberry Pi Zero.
+module RPI_assembly()
+assembly("RPI") {
+    pcb(rpi);
+
+    pcb_grid(rpi, 9.5, 0.5, -0.6)
+        rotate(180)
+            explode(20)
+                pin_header(2p54header, 20, 2, right_angle = true);
+}
+
+//! 1. Solvent weld or glue the bulkhead into the recess in the bottom of the case.
+//! 1. Fit the heatfit inserts with a soldering iron with a conical bit heated to about 200&deg;C.
+//! 1. Tap the three holes for the feet with an M3 tap.
+//! 1. Screw on the three feet with M3 x 6mm pan screws and washers.
+module case_assembly() pose([ 29.60, 0.00, 158.00 ], exploded = true) pose([ 198.00, 0.00, 352.80 ], exploded = false)
+assembly("case") {
+    if(show_box)
+        stl_colour(pp1_colour) render() enviro_plus_case_stl();
+    else
+        render() difference() {
+            enviro_plus_case_stl();
+
+            translate_z(height / 2)
+                cube([100, 100, height - 20], center = true);
+        }
+
+    pbox_inserts(box);
+
+    translate([pcb_x, 0, top_thickness])
+        explode(20)
+            stl_colour(pp2_colour) render() bulkhead_stl();
+
+    feet_positions() {
+        foot_assembly(0, foot);
+
+        vflip()
+            explode(20, explode_children = true)
+                translate_z(foot_thickness(foot))
+                    screw_and_washer(foot_screw(foot), 6);
+    }
+
+}
+
+//! * Solder the fan_controller to the Enviro+ expansion connector at the 5V, GND and #4 pins.
+module enviro_assembly() hflip(exploded())
+assembly("enviro") {
+    if(show_enviroplus)
+        pcb(pcb);
+
+    pcb_grid(pcb, 5.5, 2.5, -pcb_thickness(pcb)) {
+        hflip()
+            explode(15)
+                fan_controller_assembly();
+    }
+    if(!exploded())
+        for(x = [8, 7, 3])
+            pcb_grid(pcb, x, 0, 0.05)
+                solder_meniscus(pcb, 0.39, 1);
+}
+
+//! * Screw the Enviro+ PCB to the front of the case using M2.5 x 8mm pan screws with washer and nuts on the inside.
+module enviro_case_assembly() pose([ 231.40, 0.00, 1.20 ])
+assembly("enviro_case") {
+    case_assembly();
+
+    translate([pcb_x, 0, top_thickness])
+        vflip() explode(20, explode_children = true) {
+            t = pcb_thickness(pcb);
+            nut = screw_nut(pcb_screw);
+            washer = screw_washer(pcb_screw);
+
+            no_explode() enviro_assembly();
+
+            pcb_screw_positions(pcb) {
+                translate_z(t)
+                    screw(pcb_screw, screw_longer_than(t + bulkhead_t + nut_thickness(nut, true) + washer_thickness(washer)));
+
+                translate_z(-bulkhead_t)
+                    vflip()
+                        explode(20, explode_children = true)
+                            nut_and_washer(nut, true);
+            }
+        }
+}
+
+//! * Plug the RPi into the Enviro+ socket and secure with two screws self tapped into the bosses in the case.
+module RPI_case_assembly() pose([ 20.50, 0.00, 153.30 ])
+assembly("RPI_case") {
+    enviro_case_assembly();
+
+    translate([pcb_x, 0]) {
+        translate_z(top_thickness) {
+
+            translate(rpi_offset)
+                rotate([-90, 0, 0])
+                    RPI_assembly();
+        }
+        rpi_holes()
+            vflip()
+                translate_z(pcb_thickness(rpi))
+                    screw(pcb_screw, 6.4);
+    }
+}
+
+//! 1. Print the fan duct in flexible TPE with low infill.
+//! 1. Slide the pms5003 into the printed receptacle with the fan to the outside. Secure with tape if it is loose.
+//! 1. Slide the fan into the fan duct.
+//! 1. Slide the fan duct into the printed recepacle.
+module back_assembly() pose([ 228.60, 0.00, 24.30 ])
+assembly("back") {
+    translate(pms5003_pos)
+        explode(-50)
+            rotate([90, 0, 0])
+                pms5003();
+
+    explode(-20, explode_children = true)
+        translate(fan_pos) {
+            explode(-20)
+                fan(fan);
+
+            translate_z(-fan_depth(fan) / 2)
+                stl_colour(pp4_colour)
+                    render()
+                        fan_duct_stl();
+        }
+
+    translate_z(height + top_thickness + base_thickness + eps) vflip()
+        stl_colour(show_box ? pp1_colour : pp2_colour) render() enviro_plus_case_base_stl();
+}
+
+//! * Solder the fan wires to the veroboard assembly
+//!
+//! ![FanWires](docs/fan_connection.jpg)
+//!
+//! * Slide the back assembly into the case and secure with four M2 x 6mm cap screws and washers.
+module main_assembly() pose([170, 335, 0], exploded = false) pose([ 42.20, 0.00, 159.60 ], exploded = true)
+assembly("main") {
+    RPI_case_assembly();
+
+    explode(20, explode_children = true) {
+        pbox_base_screws(box);
+
+        back_assembly();
+    }
+}
+
+if($preview) {
+    if(assembly == "main")
+        main_assembly();
+    else if(assembly == "case")
+        case_assembly();
+    else if(assembly == "back")
+        back_assembly();
+    else if(assembly == "RPI")
+        RPI_assembly();
+    else if(assembly == "RPI_case")
+        RPI_case_assembly();
+    else if(assembly == "enviro_case")
+        enviro_case_assembly();
+}
+else {
+    gap = 5;
+
+    enviro_plus_case_stl();
+
+    translate([0, -depth - gap])
+        enviro_plus_case_base_stl();
+
+    translate([0, -2 * (depth + gap)])
+        bulkhead_stl();
+}

global_defs.scad

@@ -29,6 +29,7 @@ rr_green = [0, 146/255, 0];                                               // Rep
 crimson  = [220/255, 20/255, 60/255];
 
 layer_height    = is_undef($layer_height)    ? 0.25   : $layer_height;    // layer height when printing
+layer_height0   = is_undef($layer_height0)   ? layer_height : $layer_height0; // height of first layer if different
 extrusion_width = is_undef($extrusion_width) ? 0.5    : $extrusion_width; // filament width when printing
 nozzle          = is_undef($nozzle)          ? 0.45   : $nozzle;          // 3D printer nozzle
 cnc_bit_r       = is_undef($cnc_bit_r)       ? 1.2    : $cnc_bit_r;       // minimum tool radius when milling 2D objects
@@ -51,10 +52,7 @@ eps = 1/128;     // small fudge factor to stop CSG barfing on coincident faces.
 $fa = 6;
 $fs = extrusion_width / 2;
 
-function round_to_layer(z) = ceil(z / layer_height) * layer_height;         //! Round up to a multiple of layer_height.
-
 // Some additional named colours
-function grey(n) = [0.01, 0.01, 0.01] * n;                                  //! Generate a shade of grey to pass to color().
 silver           = [0.75, 0.75, 0.75];
 gold             = [255, 215,   0] / 255;
 brass            = [255, 220, 100] / 255;

lib.scad

@@ -63,6 +63,7 @@ include <vitamins/spools.scad>
 include <vitamins/ssrs.scad>
 include <vitamins/stepper_motors.scad>
 include <vitamins/swiss_clips.scad>
+include <vitamins/terminal.scad>
 include <vitamins/toggles.scad>
 include <vitamins/transformers.scad>
 include <vitamins/tubings.scad>

libtest.scad

@@ -51,6 +51,7 @@ use <tests/blowers.scad>
 use <tests/box_sections.scad>
 use <tests/bulldogs.scad>
 use <tests/buttons.scad>
+use <tests/cable_clip.scad>
 use <tests/cable_strips.scad>
 use <tests/cameras.scad>
 use <tests/camera_housing.scad>
@@ -73,6 +74,7 @@ use <tests/LDRs.scad>
 use <tests/LEDs.scad>
 use <tests/light_strips.scad>
 use <tests/linear_bearings.scad>
+use <tests/LED_bezel.scad>
 use <tests/LED_meters.scad>
 use <tests/magnets.scad>
 use <tests/microswitches.scad>
@@ -148,25 +150,55 @@ cable_grommets_y = 0;
 translate([x5, cable_grommets_y])
     cable_grommets();
 
+translate([x5, cable_grommets_y + 30])
+    led_bezels();
+
 translate([x5 + 50, cable_grommets_y])
     ribbon_clamps();
 
 translate([x5 + 95, cable_grommets_y])
     press_fits();
 
-translate([x5, cable_grommets_y + 60])
+fixing_blocks_y = cable_grommets_y + 60;
+translate([x5, fixing_blocks_y])
     fixing_blocks();
 
-translate([x5, cable_grommets_y + 90])
+corner_blocks_y = fixing_blocks_y + 30;
+translate([x5, corner_blocks_y])
     corner_blocks();
 
-translate([x5, cable_grommets_y + 160])
-    feet();
-
-translate([x5 + 70, cable_grommets_y + 160])
+screw_knobs_y = corner_blocks_y + 70;
+translate([x5, screw_knobs_y])
     screw_knobs();
 
-translate([x5, cable_grommets_y + 470]) {
+knobs_y = screw_knobs_y + 40;
+translate([640, knobs_y])
+    printed_pulley_test();
+
+translate([x5, knobs_y])
+    knobs();
+
+clips_y = knobs_y + 50;
+translate([x5, clips_y])
+    cable_clips();
+
+strap_y = clips_y + 50;
+translate([x5 + 60, strap_y])
+    strap_handles();
+
+translate([x6, strap_y])
+   feet();
+
+handle_y = strap_y + 50;
+translate([x5, handle_y])
+    handle();
+
+pocket_y = handle_y + 70;
+translate([x5 + 65, pocket_y])
+    pocket_handles();
+
+hinge_y = pocket_y + 100;
+translate([x5, hinge_y]) {
     door_hinges()
         door_latches();
 
@@ -174,29 +206,14 @@ translate([x5, cable_grommets_y + 470]) {
         flat_hinges();
 }
 
-translate([x5, cable_grommets_y + 380])
-    no_explode() socket_boxes();
+pbox_y = hinge_y + 70;
+translate([900, pbox_y])
+    printed_boxes();
 
-translate([640, cable_grommets_y + 200])
-    printed_pulley_test();
-
-translate([x5, cable_grommets_y + 200])
-    knobs();
-
-translate([x5 + 60, cable_grommets_y + 250])
-    strap_handles();
-
-translate([x5, cable_grommets_y + 300])
-    handle();
-
-translate([950, 600])
+box_y = pbox_y + 150;
+translate([950, box_y])
     box_test();
 
-translate([900, 750])
-    pocket_handles();
-
-translate([900, 850])
-    printed_boxes();
 
 translate([950, 1400])
     rotate(-90)
@@ -266,6 +283,9 @@ translate([x0, pulleys_y])
 translate([x0, leadnuts_y])
     leadnuts();
 
+translate([x0 + 120, leadnuts_y])
+    leadnuthousings();
+
 translate([x0, linear_bearings_y]) {
     linear_bearings();
     rods();
@@ -427,6 +447,9 @@ translate([x2, extrusions_y])
 translate([400, transformers_y])
     transformers();
 
+translate([x4 + 50, transformers_y])
+    no_explode() socket_boxes();
+
 
 belts_y = 0;
 rails_y = belts_y + 200;

printed/box.scad

@@ -86,7 +86,6 @@ function box_screw_length(type, top) =
     let(s = top ? box_top_sheet(type) : box_base_sheet(type))
         screw_length(box_screw(type), sheet_thickness(s) + box_corner_gap(type) + box_profile_overlap(type) - 1, washers = 2, insert = true, longer = true);
 
-function box_wall_clearance(type) = box_sheet_slot(type) / 2 - sheet_thickness(box_sheets(type)) / 2;
 function box_margin(type) = box_profile_overlap(type) + box_corner_gap(type); //! How much the bezel intrudes on the specified height
 function box_intrusion(type) = box_hole_inset(type) + box_boss_r(type); //! Corner profile intrusion
 function sheet_reduction(type) = 2 * box_corner_gap(type) + sheet_end_clearance;
@@ -454,8 +453,6 @@ module box_screw_hole_positions(type) {
 }
 
 module box_base_blank(type) { //! Generates a 2D template for the base sheet
-    dxf(str(box_name(type), "_base"));
-
     difference() {
         sheet_2D(box_base_sheet(type), box_width(type), box_depth(type), box_sheet_r(type));
 
@@ -465,8 +462,6 @@ module box_base_blank(type) { //! Generates a 2D template for the base sheet
 }
 
 module box_top_blank(type) {  //! Generates a 2D template for the top sheet
-    dxf(str(box_name(type), "_top"));
-
     difference() {
         sheet_2D(box_top_sheet(type), box_width(type), box_depth(type), box_sheet_r(type));
 
@@ -480,8 +475,6 @@ function subst_sheet(type, sheet) =
         sheet ? assert(sheet_thickness(sheet) == sheet_thickness(s)) sheet : s;
 
 module box_shelf_blank(type, sheet = false) { //! Generates a 2D template for a shelf sheet
-    dxf(str(box_name(type), "_shelf"));
-
     difference() {
         sheet_2D(subst_sheet(type, sheet), box_width(type) - bezel_clearance, box_depth(type) - bezel_clearance, 1);
 
@@ -580,50 +573,44 @@ module box_shelf_bracket_section(type, rows, cols, x, y) { //! Generates section
             children();
 }
 
-module box_left_blank(type, sheet = false) { //! Generates a 2D template for the left sheet, `sheet` can be set to override the type
-    dxf(str(box_name(type), "_left"));
-
+module box_left_blank(type, sheet = false) //! Generates a 2D template for the left sheet, `sheet` can be set to override the type
     sheet_2D(subst_sheet(type, sheet), box_depth(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
-}
-
-module box_right_blank(type, sheet = false) { //! Generates a 2D template for the right sheet, `sheet` can be set to override the type
-    dxf(str(box_name(type), "_right"));
 
+module box_right_blank(type, sheet = false) //! Generates a 2D template for the right sheet, `sheet` can be set to override the type
     sheet_2D(subst_sheet(type, sheet), box_depth(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
-}
-
-module box_front_blank(type, sheet = false) { //! Generates a 2D template for the front sheet, `sheet` can be set to override the type
-    dxf(str(box_name(type), "_front"));
 
+module box_front_blank(type, sheet = false) //! Generates a 2D template for the front sheet, `sheet` can be set to override the type
     sheet_2D(subst_sheet(type, sheet), box_width(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
-}
-
-module box_back_blank(type, sheet = false) { //! Generates a 2D template for the back sheet, `sheet` can be set to override the type
-    dxf(str(box_name(type), "_back"));
 
+module box_back_blank(type, sheet = false) //! Generates a 2D template for the back sheet, `sheet` can be set to override the type
     sheet_2D(subst_sheet(type, sheet), box_width(type) - sheet_reduction(type), box_height(type) - sheet_reduction(type), 1);
-}
 
 module box_base(type)   //! Default base, can be overridden to customise
     render_2D_sheet(box_base_sheet(type))
-        box_base_blank(type);
+        dxf(str(box_name(type), "_base"))
+            box_base_blank(type);
 
 module box_top(type)    //! Default top, can be overridden to customise
     render_2D_sheet(box_top_sheet(type))
-        box_top_blank(type);
+        dxf(str(box_name(type), "_top"))
+            box_top_blank(type);
 
 module box_back(type)   //! Default back, can be overridden to customise
     render_2D_sheet(box_sheets(type))
-        box_back_blank(type);
+        dxf(str(box_name(type), "_back"))
+            box_back_blank(type);
 
 module box_front(type)  //! Default front, can be overridden to customise
     render_2D_sheet(box_sheets(type))
-        box_front_blank(type);
+        dxf(str(box_name(type), "_front"))
+            box_front_blank(type);
 
 module box_left(type)   //! Default left side, can be overridden to customise
     render_2D_sheet(box_sheets(type))
-        box_left_blank(type);
+        dxf(str(box_name(type), "_left"))
+            box_left_blank(type);
 
 module box_right(type) //! Default right side, can be overridden to customise
     render_2D_sheet(box_sheets(type))
-        box_right_blank(type);
+        dxf(str(box_name(type), "_right"))
+            box_right_blank(type);

printed/butt_box.scad

@@ -120,8 +120,6 @@ module bbox_drill_holes(type, t)
         drill(screw_clearance_radius(bbox_screw(type)), 0);
 
 module bbox_base_blank(type) { //! 2D template for the base
-    dxf(str(bbox_name(type), "_base"));
-
     difference() {
         sheet_2D(bbox_base_sheet(type), bbox_width(type), bbox_depth(type), 1);
 
@@ -130,8 +128,6 @@ module bbox_base_blank(type) { //! 2D template for the base
 }
 
 module bbox_top_blank(type) { //! 2D template for the top
-    dxf(str(bbox_name(type), "_top"));
-
     t = sheet_thickness(bbox_sheets(type));
 
     difference() {
@@ -147,8 +143,6 @@ function subst_sheet(type, sheet) =
         sheet ? assert(sheet_thickness(sheet) == sheet_thickness(s)) sheet : s;
 
 module bbox_left_blank(type, sheet = false) { //! 2D template for the left side
-    dxf(str(bbox_name(type), "_left"));
-
     t = sheet_thickness(bbox_sheets(type));
     bb = sheet_thickness(bbox_base_sheet(type));
 
@@ -161,8 +155,6 @@ module bbox_left_blank(type, sheet = false) { //! 2D template for the left side
 }
 
 module bbox_right_blank(type, sheet = false) { //! 2D template for the right side
-    dxf(str(bbox_name(type), "_right"));
-
     t = sheet_thickness(bbox_sheets(type));
     bb = sheet_thickness(bbox_base_sheet(type));
 
@@ -175,8 +167,6 @@ module bbox_right_blank(type, sheet = false) { //! 2D template for the right sid
 }
 
 module bbox_front_blank(type, sheet = false, width = 0) { //! 2D template for the front
-    dxf(str(bbox_name(type), "_front"));
-
     t = sheet_thickness(bbox_sheets(type));
     bb = sheet_thickness(bbox_base_sheet(type));
     bt = sheet_thickness(bbox_top_sheet(type));
@@ -190,8 +180,6 @@ module bbox_front_blank(type, sheet = false, width = 0) { //! 2D template for th
 }
 
 module bbox_back_blank(type, sheet = false) { //! 2D template for the back
-    dxf(str(bbox_name(type), "_back"));
-
     bb = sheet_thickness(bbox_base_sheet(type));
     t = sheet_thickness(bbox_sheets(type));
 
@@ -205,27 +193,33 @@ module bbox_back_blank(type, sheet = false) { //! 2D template for the back
 
 module bbox_base(type)  //! Default base, can be overridden to customise
     render_2D_sheet(bbox_base_sheet(type))
-        bbox_base_blank(type);
+        dxf(str(bbox_name(type), "_base"))
+            bbox_base_blank(type);
 
 module bbox_top(type)   //! Default top, can be overridden to customise
     render_2D_sheet(bbox_top_sheet(type))
-        bbox_top_blank(type);
+        dxf(str(bbox_name(type), "_top"))
+            bbox_top_blank(type);
 
 module bbox_back(type)  //! Default back, can be overridden to customise
     render_2D_sheet(bbox_sheets(type))
-        bbox_back_blank(type);
+        dxf(str(bbox_name(type), "_back"))
+            bbox_back_blank(type);
 
 module bbox_front(type) //! Default front, can be overridden to customise
     render_2D_sheet(bbox_sheets(type))
-        bbox_front_blank(type);
+        dxf(str(bbox_name(type), "_front"))
+            bbox_front_blank(type);
 
 module bbox_left(type)  //! Default left side, can be overridden to customise
     render_2D_sheet(bbox_sheets(type))
-        bbox_left_blank(type);
+        dxf(str(bbox_name(type), "_left"))
+            bbox_left_blank(type);
 
 module bbox_right(type) //! Default right side, can be overridden to customise
     render_2D_sheet(bbox_sheets(type))
-        bbox_right_blank(type);
+        dxf(str(bbox_name(type), "_right"))
+            bbox_right_blank(type);
 
 module _bbox_assembly(type, top = true, base = true, left = true, right = true, back = true, front = true) { //! The box assembly, wrap with a local copy without parameters
     width = bbox_width(type);

printed/cable_clip.scad

@@ -0,0 +1,117 @@
+//
+// NopSCADlib Copyright Chris Palmer 2022
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Cable clips to order. Can be for one or two cables of different sizes.
+//
+include <../core.scad>
+use <../vitamins/wire.scad>
+use <../utils/fillet.scad>
+
+wall = 2;
+
+function cable_clip_width(screw) = max(wall + 2 * screw_clearance_radius(screw) + wall, washer_diameter(screw_washer(screw))); //! Width given the `screw`.
+function cable_clip_height(cable) = cable_height(cable) + wall; //! Height given the `cable`.
+function cable_clip_extent(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) + wall; //! How far it extends from the screw.
+function cable_clip_offset(screw, cable) = screw_clearance_radius(screw) + wall + cable_width(cable) / 2; //! The offset of the cable from the screw
+
+module single_cable_clip(screw, cable, h = 0) {
+    screw_dia = 2 * screw_clearance_radius(screw);
+    height = cable_clip_width(screw);
+    depth = h ? h : cable_height(cable) + wall;
+    w = cable_width(cable);
+    width = wall + w + wall + screw_dia + wall;
+    hole_x = wall + w + wall + screw_dia / 2;
+    rad = min(wall + cable_wire_size(cable) / 2, depth / 2);
+    r = extrusion_width - eps;
+    translate([-hole_x, 0]) difference() {
+        linear_extrude(height)
+            difference() {
+                hull() {
+                    rounded_square([width, 1], r, center = false);
+
+                    translate([width - 1, 0])
+                        rounded_square([1, depth], r, center = false);
+
+                    translate([rad, depth - rad])
+                        circle(r = rad);
+                }
+
+                translate([wall + cable_width(cable) / 2, 0]) {
+                    hull() {
+                        for(p = cable_bundle_positions(cable))
+                            translate(p)
+                                circle(d = cable_wire_size(cable));
+
+                        square([w, eps], center = true);
+                    }
+                    for(side = [-1, 1])
+                        translate([side * w / 2, 0])
+                            hflip(side < 0)
+                                fillet(r = r, h = 0);
+                }
+            }
+
+        translate([hole_x, depth / 2, height / 2])
+            rotate([90,0,0])
+                teardrop_plus(h = depth + 1, r = screw_dia / 2, center = true);
+    }
+}
+
+
+module double_cable_clip(screw, cable1, cable2) {
+    h = max(cable_clip_height(cable1), cable_clip_height(cable2));
+    union() {
+        single_cable_clip(screw, cable1, h);
+
+        mirror([1,0,0]) single_cable_clip(screw, cable2, h);
+    }
+}
+
+module cable_clip(screw, cable1, cable2 = 0) { //! Create the STL for a single cable or two cable clip
+    function clip_str(screw) = str("cable_clip_", screw_radius(screw) * 20);
+    function cable_str(cable) = str("_", cable_wires(cable), "_", round(cable_wire_size(cable) * 10));
+
+    if(cable2) {
+        stl(str(clip_str(screw), cable_str(cable1), cable_str(cable2)));
+
+        double_cable_clip(screw, cable1, cable2);
+    }
+    else {
+        stl(str(clip_str(screw), cable_str(cable1)));
+
+        single_cable_clip(screw, cable1);
+    }
+}
+
+
+module cable_clip_assembly(screw, thickness, cable1, cable2 = 0) { //! Cable clip with the fasteners
+    height = max(cable_clip_height(cable1), cable2 ? cable_clip_height(cable2) : 0);
+
+    stl_colour(pp1_colour) render()
+        translate([0, cable_clip_width(screw) / 2]) rotate([90, 0, 0])
+            cable_clip(screw, cable1, cable2);
+
+    translate_z(height)
+        screw_and_washer(screw, screw_length(screw, height + thickness, 2, nyloc = true));
+
+    translate_z(-thickness)
+        vflip()
+            nut_and_washer(screw_nut(screw), true);
+}

printed/camera_housing.scad

@@ -23,7 +23,6 @@
 include <../core.scad>
 include <../vitamins/cameras.scad>
 use <../vitamins/pcb.scad>
-use <../vitamins/insert.scad>
 
 wall = 1.75;
 min_wall = 2 * extrusion_width;

printed/corner_block.scad

@@ -31,7 +31,7 @@
 //! Star washers can be omitted by setting `star_washers` to false.
 //!
 //! A 2screw_block is a thinner version with two screws and two mating surfaces. It can be used as an alternative to fixing blocks when
-//! high lateral rigity is not required.
+//! high lateral rigidity is not required.
 //
 include <../core.scad>
 use <../vitamins/insert.scad>
@@ -44,47 +44,49 @@ overshoot = 2;      // how far screw can overshoot the insert
 
 function corner_block_screw() = def_screw; //! Default screw type
 
-function corner_block_hole_offset(screw = def_screw) = //! Hole offset from the edge
-    let(insert = screw_insert(screw))
+function corner_block_hole_offset(screw = def_screw, short_insert = false) = //! Hole offset from the edge
+    let(insert = screw_insert(screw, short_insert))
         insert_length(insert) + max(overshoot + screw_clearance_radius(screw), insert_hole_radius(insert)) + 1;
 
+function corner_block_width(screw = def_screw, short_insert = false) = //! Block width, depth and height
+    corner_block_hole_offset(screw, short_insert) + insert_outer_d(screw_insert(screw, short_insert)) / 2 + wall;
 
-function corner_block_width(screw = def_screw) = //! Block width, depth and height
-    corner_block_hole_offset(screw) + insert_outer_d(screw_insert(screw)) / 2 + wall;
+function corner_block_v_hole(screw = def_screw, short_insert = false) = //! Transform to bottom hole
+    let(offset = corner_block_hole_offset(screw, short_insert))
+        translate([offset, offset]) * rotate([180, 0, 0]);
 
-function corner_block_v_hole(screw = def_screw) = let(offset = corner_block_hole_offset(screw)) translate([offset, offset]) * rotate([180, 0, 0]); //! Transform to bottom hole
-
-function corner_block_h_holes(screw = def_screw) = //! List of transforms to side holes
-    let(offset = corner_block_hole_offset(screw))
+function corner_block_h_holes(screw = def_screw, short_insert = false) = //! List of transforms to side holes
+    let(offset = corner_block_hole_offset(screw, short_insert))
         [translate([offset, 0,      offset])                * rotate([90, 0,   0]),
          translate([0,      offset, offset - layer_height]) * rotate([90, 0, -90])];
 
-function corner_block_holes(screw) = concat([corner_block_v_hole(screw)], corner_block_h_holes(screw)); //! List of transforms to all holes
+function corner_block_holes(screw, short_insert = false) =  //! List of transforms to all holes
+    concat([corner_block_v_hole(screw, short_insert)], corner_block_h_holes(screw, short_insert));
 
-module corner_block_v_hole(screw = def_screw) //! Place children at the bottom screw hole
-    multmatrix(corner_block_v_hole(screw))
+module corner_block_v_hole(screw = def_screw, short_insert = false) //! Place children at the bottom screw hole
+    multmatrix(corner_block_v_hole(screw, short_insert))
         children();
 
-module corner_block_h_holes(screw = def_screw, index = undef) //! Place children at the side screw holes
-    for(p = !is_undef(index) ? [corner_block_h_holes(screw)[index]] : corner_block_h_holes(screw))
+module corner_block_h_holes(screw = def_screw, index = undef, short_insert = false) //! Place children at the side screw holes
+    for(p = !is_undef(index) ? [corner_block_h_holes(screw, short_insert)[index]] : corner_block_h_holes(screw, short_insert))
         multmatrix(p)
             children();
 
-module corner_block_holes(screw = def_screw) //! Place children at all the holes
-    for(p = corner_block_holes(screw))
+module corner_block_holes(screw = def_screw, short_insert = false) //! Place children at all the holes
+    for(p = corner_block_holes(screw, short_insert))
         multmatrix(p)
             children();
 
-module corner_block(screw = def_screw, name = false) { //! Generate the STL for a printed corner block
+module corner_block(screw = def_screw, name = false, short_insert = false) { //! Generate the STL for a printed corner block
     r = 1;
-    cb_width = corner_block_width(screw);
+    cb_width = corner_block_width(screw, short_insert);
     cb_height = cb_width;
     cb_depth = cb_width;
-    insert = screw_insert(screw);
+    insert = screw_insert(screw, short_insert);
     corner_rad = insert_outer_d(insert) / 2 + wall;
-    offset = corner_block_hole_offset(screw);
+    offset = corner_block_hole_offset(screw, short_insert);
 
-    stl(name ? name : str("corner_block", "_M", screw_radius(screw) * 20))
+    stl(name ? name : str("corner_block", "_M", screw_radius(screw) * 20, short_insert ? "_s": ""))
         difference() {
             hull()  {
                 translate([r, r])
@@ -110,53 +112,54 @@ module corner_block(screw = def_screw, name = false) { //! Generate the STL for
                     rotate([0, 90, 180])
                         rounded_cylinder(r = corner_rad, h = r, r2 = r);
             }
-            corner_block_v_hole(screw)
+            corner_block_v_hole(screw, short_insert)
                 insert_hole(insert, overshoot);
 
-            corner_block_h_holes(screw)
+            corner_block_h_holes(screw, short_insert = short_insert)
                 insert_hole(insert, overshoot, true);
 
             children();
         }
 }
 
-module corner_block_assembly(screw = def_screw, name = false) //! The printed block with inserts
-assembly(str("corner_block_M", 20 * screw_radius(screw)), ngb = true) {
-    insert = screw_insert(screw);
+module corner_block_assembly(screw = def_screw, name = false, short_insert = false) //! The printed block with inserts
+assembly(name ? name : str("corner_block_M", 20 * screw_radius(screw), short_insert ? "_s": ""), ngb = true) {
+    insert = screw_insert(screw, short_insert);
 
     stl_colour(name ? pp2_colour : pp1_colour)
-        render() corner_block(screw, name) children();
+        render() corner_block(screw, name, short_insert) children();
 
-    corner_block_h_holes(screw)
+    corner_block_h_holes(screw, short_insert = short_insert)
         insert(insert);
 
-    corner_block_v_hole(screw)
+    corner_block_v_hole(screw, short_insert)
         insert(insert);
 }
 
-module fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, thickness_side2 = undef, name = false, show_block = true, star_washers = true) { //! Printed block with all fasteners
+module fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, thickness_side2 = undef, name = false, show_block = true, star_washers = true, short_insert = false) { //! Printed block with all fasteners
     thickness2 = !is_undef(thickness_below) ? thickness_below : thickness;
     thickness3 = !is_undef(thickness_side2) ? thickness_side2 : thickness;
-    function screw_len(t) = screw_length(screw, t + overshoot, star_washers ? 2 : 1, true);
+    insert = screw_insert(screw, short_insert);
+    function screw_len(t) = screw_length(screw, t + overshoot, star_washers ? 2 : 1, insert);
     screw_length = screw_len(thickness);
     screw_length2 = screw_len(thickness2);
     screw_length3 = screw_len(thickness3);
 
     if(show_block)
-        corner_block_assembly(screw, name) children();
+        corner_block_assembly(screw, name, short_insert) children();
 
     if(thickness)
-        corner_block_h_holes(screw, 0)
+        corner_block_h_holes(screw, 0, short_insert)
             translate_z(thickness)
                 screw_and_washer(screw, screw_length, star_washers);
 
     if(thickness3)
-        corner_block_h_holes(screw, 1)
+        corner_block_h_holes(screw, 1, short_insert)
             translate_z(thickness3)
                 screw_and_washer(screw, screw_length3, star_washers);
 
     if(thickness2)
-        corner_block_v_hole(screw)
+        corner_block_v_hole(screw, short_insert)
             translate_z(thickness2)
                 screw_and_washer(screw, screw_length2, star_washers);
 }
@@ -165,6 +168,10 @@ module corner_block_M20_stl() corner_block(M2_cap_screw);
 module corner_block_M25_stl() corner_block(M2p5_cap_screw);
 module corner_block_M30_stl() corner_block(M3_cap_screw);
 module corner_block_M40_stl() corner_block(M4_cap_screw);
+module corner_block_M20_s_stl() corner_block(M2_cap_screw, short_insert = true);
+module corner_block_M25_s_stl() corner_block(M2p5_cap_screw, short_insert = true);
+module corner_block_M30_s_stl() corner_block(M3_cap_screw, short_insert = true);
+module corner_block_M40_s_stl() corner_block(M4_cap_screw, short_insert = true);
 //
 //! 1. Lay the blocks out and place an M2 insert in each upward facing hole.
 //! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
@@ -197,36 +204,69 @@ module corner_block_M30_assembly() corner_block_assembly(M3_cap_screw);
 //
 module corner_block_M40_assembly() corner_block_assembly(M4_cap_screw);
 
-function 2screw_block_width(screw = def_screw) = //! 2 screw block width is narrower, height and depth are as corner_block
-    insert_outer_d(screw_insert(screw)) + 2 * wall;
+//
+//! 1. Lay the blocks out and place an M2 insert in each upward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other two flat sides and repeat.
+//
+module corner_block_M20_s_assembly() corner_block_assembly(M2_cap_screw, short_insert = true);
 
-function 2screw_block_v_hole(screw = def_screw) = translate([0, corner_block_hole_offset(screw)]) * rotate([180, 0, 0]); //! Transform to bottom hole
-function 2screw_block_h_hole(screw = def_screw) = translate([0, 0, corner_block_hole_offset(screw)]) * rotate([90, 0, 0]); //! Transform to front hole
-function 2screw_block_holes(screw) = concat([2screw_block_v_hole(screw)], [2screw_block_h_hole(screw)]); //! List of transforms to both holes
+//
+//! 1. Lay the blocks out and place an M2.5 insert in each upward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other two flat sides and repeat.
+//
+module corner_block_M25_s_assembly() corner_block_assembly(M2p5_cap_screw, short_insert = true);
 
-module 2screw_block_v_hole(screw = def_screw) //! Place children at the bottom screw hole
-    multmatrix(2screw_block_v_hole(screw))
+//
+//! 1. Lay the blocks out and place an M3 insert in each upward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other two flat sides and repeat.
+//
+module corner_block_M30_s_assembly() corner_block_assembly(M3_cap_screw, short_insert = true);
+
+//
+//! 1. Lay the blocks out and place an M4 insert in each upward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other two flat sides and repeat.
+//
+module corner_block_M40_s_assembly() corner_block_assembly(M4_cap_screw, short_insert = true);
+
+
+function 2screw_block_width(screw = def_screw, short_insert = false) = //! 2 screw block width is narrower, height and depth are as corner_block
+    insert_outer_d(screw_insert(screw, short_insert)) + 2 * wall;
+
+function 2screw_block_v_hole(screw = def_screw, short_insert = false) = translate([0, corner_block_hole_offset(screw, short_insert)]) * rotate([180, 0, 0]); //! Transform to bottom hole
+function 2screw_block_h_hole(screw = def_screw, short_insert = false) = translate([0, 0, corner_block_hole_offset(screw, short_insert)]) * rotate([90, 0, 0]); //! Transform to front hole
+function 2screw_block_holes(screw, short_insert = false) = concat([2screw_block_v_hole(screw, short_insert)], [2screw_block_h_hole(screw, short_insert)]); //! List of transforms to both holes
+
+module 2screw_block_v_hole(screw = def_screw, short_insert = false) //! Place children at the bottom screw hole
+    multmatrix(2screw_block_v_hole(screw, short_insert))
         children();
 
-module 2screw_block_h_hole(screw = def_screw) //! Place children at the front screw hole
-    multmatrix(2screw_block_h_hole(screw))
+module 2screw_block_h_hole(screw = def_screw, short_insert = false) //! Place children at the front screw hole
+    multmatrix(2screw_block_h_hole(screw, short_insert))
         children();
 
-module 2screw_block_holes(screw = def_screw) //! Place children at both screw holes
-    for(p = 2screw_block_holes(screw))
+module 2screw_block_holes(screw = def_screw, short_insert = false) //! Place children at both screw holes
+    for(p = 2screw_block_holes(screw, short_insert))
         multmatrix(p)
             children();
 
-module 2screw_block(screw = def_screw, name = false) { //! Generate the STL for a printed 2screw block
+module 2screw_block(screw = def_screw, name = false, short_insert = false) { //! Generate the STL for a printed 2screw block
     r = 1;
-    cb_width = 2screw_block_width(screw);
-    cb_height = corner_block_width(screw);
+    cb_width = 2screw_block_width(screw, short_insert);
+    cb_height = corner_block_width(screw, short_insert);
     cb_depth = cb_height;
-    insert = screw_insert(screw);
+    insert = screw_insert(screw, short_insert);
     corner_rad = insert_outer_d(insert) / 2 + wall;
-    offset = corner_block_hole_offset(screw);
+    offset = corner_block_hole_offset(screw, short_insert);
 
-    stl(name ? name : str("2screw_block", "_M", screw_radius(screw) * 20))
+    stl(name ? name : str("2screw_block", "_M", screw_radius(screw) * 20, short_insert ? "_s" : ""))
         difference() {
             hull()  {
                 translate([-cb_width / 2 + r, r])
@@ -245,43 +285,44 @@ module 2screw_block(screw = def_screw, name = false) { //! Generate the STL for
                     rotate([-90, 0, 180])
                         rounded_cylinder(r = corner_rad, h = r, r2 = r);
             }
-            2screw_block_v_hole(screw)
+            2screw_block_v_hole(screw, short_insert)
                 insert_hole(insert, overshoot);
 
-            2screw_block_h_hole(screw)
+            2screw_block_h_hole(screw, short_insert)
                 insert_hole(insert, overshoot, true);
 
             children();
         }
 }
 
-module 2screw_block_assembly(screw = def_screw, name = false) //! The printed block with inserts
-assembly(str("2screw_block_M", 20 * screw_radius(screw)), ngb = true) {
-    insert = screw_insert(screw);
+module 2screw_block_assembly(screw = def_screw, name = false, short_insert = false) //! The printed block with inserts
+assembly(name ? name : str("2screw_block_M", 20 * screw_radius(screw), short_insert ? "_s" :""), ngb = true) {
+    insert = screw_insert(screw, short_insert);
 
     stl_colour(name ? pp2_colour : pp1_colour)
-        render() 2screw_block(screw, name) children();
+        render() 2screw_block(screw, name, short_insert) children();
 
-    2screw_block_holes(screw)
+    2screw_block_holes(screw, short_insert)
         insert(insert);
 }
 
-module fastened_2screw_block_assembly(thickness, screw = def_screw, thickness_below = undef, name = false, show_block = true, star_washers = true) { //! Printed block with fasteners
+module fastened_2screw_block_assembly(thickness, screw = def_screw, thickness_below = undef, name = false, show_block = true, star_washers = true, short_insert = false) { //! Printed block with fasteners
     thickness2 = !is_undef(thickness_below) ? thickness_below : thickness;
-    function screw_len(t) = screw_length(screw, t + overshoot, star_washers ? 2 : 1, true);
+    insert = screw_insert(screw, short_insert);
+    function screw_len(t) = screw_length(screw, t + overshoot, star_washers ? 2 : 1, insert);
     screw_length = screw_len(thickness);
     screw_length2 = screw_len(thickness2);
 
     if(show_block)
-        2screw_block_assembly(screw, name) children();
+        2screw_block_assembly(screw, name, short_insert) children();
 
     if(thickness)
-        2screw_block_h_hole(screw)
+        2screw_block_h_hole(screw, short_insert)
             translate_z(thickness)
                 screw_and_washer(screw, screw_length, star_washers);
 
     if(thickness2)
-        2screw_block_v_hole(screw)
+        2screw_block_v_hole(screw, short_insert)
             translate_z(thickness2)
                 screw_and_washer(screw, screw_length2, star_washers);
 }
@@ -289,6 +330,11 @@ module 2screw_block_M20_stl() 2screw_block(M2_cap_screw);
 module 2screw_block_M25_stl() 2screw_block(M2p5_cap_screw);
 module 2screw_block_M30_stl() 2screw_block(M3_cap_screw);
 module 2screw_block_M40_stl() 2screw_block(M4_cap_screw);
+
+module 2screw_block_M20_s_stl() 2screw_block(M2_cap_screw, short_insert = true);
+module 2screw_block_M25_s_stl() 2screw_block(M2p5_cap_screw, short_insert = true);
+module 2screw_block_M30_s_stl() 2screw_block(M3_cap_screw, short_insert = true);
+module 2screw_block_M40_s_stl() 2screw_block(M4_cap_screw, short_insert = true);
 //
 //! 1. Lay the blocks out and place an M2 insert in the forward facing hole.
 //! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
@@ -297,6 +343,14 @@ module 2screw_block_M40_stl() 2screw_block(M4_cap_screw);
 //
 module 2screw_block_M20_assembly() 2screw_block_assembly(M2_cap_screw);
 
+//
+//! 1. Lay the blocks out and place an M2 insert in the forward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other flat side and repeat.
+//
+module 2screw_block_M20_s_assembly() 2screw_block_assembly(M2_cap_screw, short_insert = true);
+
 //
 //! 1. Lay the blocks out and place an M2.5 insert in the forward facing hole.
 //! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
@@ -305,6 +359,14 @@ module 2screw_block_M20_assembly() 2screw_block_assembly(M2_cap_screw);
 //
 module 2screw_block_M25_assembly() 2screw_block_assembly(M2p5_cap_screw);
 
+//
+//! 1. Lay the blocks out and place an M2.5 insert in the forward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other flat side and repeat.
+//
+module 2screw_block_M25_s_assembly() 2screw_block_assembly(M2p5_cap_screw, short_insert = true);
+
 //
 //! 1. Lay the blocks out and place an M3 insert in the forward facing hole.
 //! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
@@ -313,6 +375,14 @@ module 2screw_block_M25_assembly() 2screw_block_assembly(M2p5_cap_screw);
 //
 module 2screw_block_M30_assembly() 2screw_block_assembly(M3_cap_screw);
 
+//
+//! 1. Lay the blocks out and place an M3 insert in the forward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other flat side and repeat.
+//
+module 2screw_block_M30_s_assembly() 2screw_block_assembly(M3_cap_screw, short_insert = true);
+
 //
 //! 1. Lay the blocks out and place an M4 insert in the forward facing hole.
 //! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
@@ -320,3 +390,11 @@ module 2screw_block_M30_assembly() 2screw_block_assembly(M3_cap_screw);
 //! 1. Lay the blocks on each of their other flat side and repeat.
 //
 module 2screw_block_M40_assembly() 2screw_block_assembly(M4_cap_screw);
+
+//
+//! 1. Lay the blocks out and place an M4 insert in the forward facing hole.
+//! 1. Push them home with a soldering iron with a conical bit heated to 200&deg;C.
+//! When removing the iron it helps to twist it a little anti-clockwise to release it from the thread.
+//! 1. Lay the blocks on each of their other flat side and repeat.
+//
+module 2screw_block_M40_s_assembly() 2screw_block_assembly(M4_cap_screw, short_insert = true);

printed/flat_hinge.scad

@@ -111,8 +111,8 @@ module hinge_male(type, female = false) {       //! The half with the stationary
                                         rotate(180)
                                             teardrop(r = kr, h = 0);
 
-                                        translate([-kr - 1, -kr])
-                                            square(1);
+                                        translate([-kr - inset - eps, -kr])
+                                            square([eps, t]);
                                     }
                                     teardrop_plus(r = pr + (female ? gap : 0), h = 0);
                                 }

printed/knob.scad

@@ -20,7 +20,7 @@
 //
 //! Parametric knobs for potentiometers and encoders.
 //!
-//! A knob can be constructed by specififying all the parameters or the potentiometer can be specified to customise it for its shaft with a recess to clear the nut, washer and thread.
+//! A knob can be constructed by specifying all the parameters or the potentiometer can be specified to customise it for its shaft with a recess to clear the nut, washer and thread.
 //! An optional skirt and / or a pointer can be specified.
 //!
 //! The STL includes a support membrane that needs to be cut out and a thread needs to be tapped for the grub screw.

printed/led_bezel.scad

@@ -0,0 +1,85 @@
+//
+// NopSCADlib Copyright Chris Palmer 2022
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+//
+//! Printed LED bezels for panel mounting
+//
+include <../core.scad>
+
+use <../vitamins/led.scad>
+
+function led_bezel(led, flange = 1, flange_h = 1, wall = 1, height = 8) = [led, flange, flange_h, wall, height]; //! Constructor
+function led_bezel_led(type)      = type[0]; //! The LED
+function led_bezel_flange(type)   = type[1]; //! Flange width
+function led_bezel_flange_t(type) = type[2]; //! Flange thickness
+function led_bezel_wall(type)     = type[3]; //! Wall thickness
+function led_bezel_height(type)   = type[4]; //! Total height
+
+function led_bezel_r(type)   =     //! Radius of the tube
+    corrected_radius(led_rim_dia(led_bezel_led(type)) / 2) + led_bezel_wall(type);
+
+function led_bezel_hole_r(type)   =     //! Panel hole radius
+    led_bezel_r(type) + 0.1;
+
+module led_bezel(type) { //! Makes the STL for the bezel
+    led = led_bezel_led(type);
+    stl(str(led[0],"_bezel")) {
+        rl = led_diameter(led) / 2;
+        rr = led_rim_dia(led) / 2;
+        wall = led_bezel_wall(type);
+        poly_tube(or = rr + wall + led_bezel_flange(type), ir = rl, h = led_bezel_flange_t(type));              // Flange
+        poly_tube(or = rl + wall,                          ir = rl, h = led_height(led) - rl - led_rim_t(led)); // Tube up to LED flange
+        poly_tube(or = corrected_radius(rr) + wall,        ir = rr, h = led_bezel_height(type));                // Tube beyond the flange
+    }
+}
+
+module led_bezel_retainer(type) { //! Makes the STL for the retaining ring
+    led = led_bezel_led(type);
+    stl(str(led[0],"_bezel_retainer")) {
+        ir =  led_bezel_r(type);
+        poly_tube(or = ir + led_bezel_wall(type), ir = ir, h = 4);
+    }
+}
+
+module led_bezel_assembly(type, colour = "red") {//! Led bezel with LED
+    led = led_bezel_led(type);
+    assembly(str(led[0], "_", colour, "_bezel")) {
+        translate_z(led_bezel_flange_t(type)) {
+            vflip()
+                stl_colour(pp1_colour)
+                    led_bezel(type);
+
+            translate_z(-led_height(led) + led_diameter(led) / 2)
+                explode(-20)
+                    led(led, colour);
+        }
+    }
+}
+
+module led_bezel_fastened_assembly(type, t, colour = "red") //! Led bezel fitted to panel with  and retaining ring
+{
+    explode(20)
+        led_bezel_assembly(type, colour);
+
+    translate_z(-t)
+        vflip()
+            stl_colour(pp2_colour)
+                explode(60)
+                    led_bezel_retainer(type);
+}

printed/pocket_handle.scad

@@ -137,7 +137,7 @@ module pocket_handle_assembly(type) { //! Assembly with fasteners in place
 
     translate_z(f.z + t / 2) hflip() {
         stl_colour(pp1_colour)
-            pocket_handle(type);
+            render() pocket_handle(type);
 
         pocket_handle_hole_positions(type) {
             translate_z(f.z + t)

printed/printed_box.scad

@@ -32,8 +32,8 @@ use <../vitamins/washer.scad>
 use <../vitamins/insert.scad>
 use <foot.scad>
 
-function pbox(name, wall, top_t, base_t, radius, size, foot = false, screw = false, ridges = [0, 0]) //! Construct a printed box property list
-    = concat([name, wall, top_t, base_t, foot, screw, radius, ridges], size);
+function pbox(name, wall, top_t, base_t, radius, size, foot = false, screw = false, short_insert = false, ridges = [0, 0]) //! Construct a printed box property list
+    = concat([name, wall, top_t, base_t, foot, screw, short_insert, radius, ridges], size);
 
 function pbox_name(type)       = type[0]; //! Name to allow more than one box in a project
 function pbox_wall(type)       = type[1]; //! Wall thickness
@@ -41,11 +41,12 @@ function pbox_top(type)        = type[2]; //! Top thickness
 function pbox_base(type)       = type[3]; //! Base thickness, can be zero for no base
 function pbox_foot(type)       = type[4]; //! Printed foot, can be false to suppress feet
 function pbox_base_screw(type) = type[5]; //! Screw type if no feet
-function pbox_radius(type)     = type[6]; //! Internal corner radius
-function pbox_ridges(type)     = type[7]; //! Ridge wavelength and amplitude
-function pbox_width(type)      = type[8]; //! Internal width
-function pbox_depth(type)      = type[9]; //! Internal depth
-function pbox_height(type)     = type[10]; //! Internal height
+function pbox_short_insert(type)=type[6]; //! Use short inserts
+function pbox_radius(type)     = type[7]; //! Internal corner radius
+function pbox_ridges(type)     = type[8]; //! Ridge wavelength and amplitude
+function pbox_width(type)      = type[9]; //! Internal width
+function pbox_depth(type)      = type[10]; //! Internal depth
+function pbox_height(type)     = type[11]; //! Internal height
 
 base_outset = 1;    // How much the base overlaps the inner dimensions
 base_overlap = 2;   // The width of ledge the base sits on
@@ -63,12 +64,12 @@ function pbox_total_height(type) =  //! Total height including base overlap
 function pbox_screw(type) =         //! Foot screw if got feet else base_screw
     let(foot = pbox_foot(type)) foot ? foot_screw(foot) : pbox_base_screw(type);
 
-function pbox_insert(type) = screw_insert(pbox_screw(type)); //! The insert for the base screws
+function pbox_insert(type) = screw_insert(pbox_screw(type), short = pbox_short_insert(type)); //! The insert for the base screws
 function pbox_washer(type) = screw_washer(pbox_screw(type)); //! The washer for the base screws
 
 function pbox_screw_length(type, panel_thickness = 0) =  //! Length of the base screw
     let(foot = pbox_foot(type), screw = pbox_screw(type))
-        screw_length(screw, pbox_base(type) + (foot ? foot_thickness(foot) : panel_thickness), 1, true);
+        screw_length(screw, pbox_base(type) + (foot ? foot_thickness(foot) : panel_thickness), 1,  pbox_insert(type));
 
 function pbox_mid_offset(type) = pbox_ridges(type).y + pbox_wall(type) / 2; // Offset to wall midpoint
 

printed/ribbon_clamp.scad

@@ -20,7 +20,7 @@
 //
 //! Clamp for ribbon cable and polypropylene strip or one or more ribbon cables.
 //!
-//! * When `ways` is a scalar number the slot is sized for one rubbon cable and a PP strip.
+//! * When `ways` is a scalar number the slot is sized for one ribbon cable and a PP strip.
 //! * When `ways` is a two element vector the second element indicates the number of cables and the slot is size for just the cables.
 //
 include <../core.scad>
@@ -105,7 +105,7 @@ assembly(let(screw_d = screw_radius(screw) * 2)str("ribbon_clamp_", str_ways(way
 
 module ribbon_clamp_fastened_assembly(ways, thickness, screw = screw) { //! Clamp with fasteners in place
     tape_l = floor(ribbon_clamp_slot(ways));
-    tape_width = 25;
+    tape_width = ribbon_clamp_width(screw) + 2;
     tape_thickness = 0.5;
 
     vitamin(str(": Tape self amalgamating silicone ",tape_l," x 25mm"));

printed/screw_knob.scad

@@ -19,53 +19,102 @@
 
 //
 //! Knob with embedded hex head screw.
+//!
+//! Most aspects can be customised, e.g. the flange thickness and radius. It can also be solid or just a wall and be wavey edged or fluted.
 //
 include <../core.scad>
 use <../utils/hanging_hole.scad>
 
-knob_wall = 2;
+function screw_knob_screw(type)    = type[0]; //! The hex screw
+function screw_knob_wall(type)     = type[1]; //! Wall thickness
+function screw_knob_stem_h(type)   = type[2]; //! The stem height below the flange
+function screw_knob_flange_t(type) = type[3]; //! The thickness of the flange
+function screw_knob_flange_r(type) = type[4]; //! The flange outside radius
+function screw_knob_solid(type)    = type[5]; //! Is the flange solid or just a wall
+function screw_knob_waves(type)    = type[6]; //! Number of waves around the flange edge
+function screw_knob_wave_amp(type) = type[7]; //! Wave amplitude
+function screw_knob_fluted(type)   = type[8]; //! Fluted instead of sine wave
+
+function screw_knob(screw, wall = 2, stem_h = 6, flange_t = 4, flange_r = 9, solid = true, waves = 5, wave_amp = 2, fluted = false) = //! Constructor
+    [screw, wall, stem_h, flange_t, flange_r, solid, waves, wave_amp, fluted];
+
 function knob_nut_trap_depth(screw) = round_to_layer(screw_head_height(screw));
-knob_stem_h = 6;
-knob_thickness = 4;
-knob_r = 8;
-knob_wave = 1;
-knob_waves = 5;
-knob_height = knob_stem_h + knob_thickness;
-function knob_height() = knob_height;
+function knob_height(type) = //! Total height of the knob
+    let(type = !is_list(type[0]) ? screw_knob(type) : type)
+        screw_knob_stem_h(type) + screw_knob_flange_t(type);
 
-module screw_knob(screw) { //! Generate the STL for a knob to fit the specified hex screw
-    knob_stem_r = nut_trap_radius(screw_nut(screw)) + knob_wall;
+module screw_knob(type) { //! Generate the STL for a knob to fit the specified hex screw
+    type = !is_list(type[0]) ? screw_knob(type) : type;         // Allow just the screw to be specified for backwards compatibility
+    screw = screw_knob_screw(type);
+    wall = screw_knob_wall(type);
+    trap_r = nut_trap_radius(screw_nut(screw));
+    stem_r = trap_r + wall;
+    amp = screw_knob_wave_amp(type);
+    flange_r = max(screw_knob_flange_r(type), stem_r + amp);
+    flange_t = screw_knob_flange_t(type);
+    knob_h = knob_height(type);
+    waves = screw_knob_waves(type);
 
-    function wave(a) = knob_r + sin(a * knob_waves) * knob_wave;
+    function wave(a) = flange_r - amp / 2 + sin(a * waves) * amp / 2;
+    fn = r2sides(flange_r);
+    points = [for(i = [0 : fn - 1], a = i * 360 / fn) wave(a) * [sin(a), cos(a)]];
+    solid = screw_knob_solid(type);
+
+    module shape()
+        if(screw_knob_fluted(type))
+            difference() {
+                circle4n(flange_r);
+
+                c = flange_r * sin(90 / waves);            // Flute half chord
+                d = flange_r - flange_r * cos(90 / waves); // Distance from chord to perimeter
+                b = amp - d;                               // Distance from chord to flute bottom
+                flute_r = (b^2 + c^2) / b / 2;
+                for(i = [0 : waves - 1])
+                    rotate(360 * i / waves)
+                        translate([0, flange_r - amp + flute_r])
+                            circle4n(flute_r);
+            }
+        else
+            polygon(points);
 
     stl(str("screw_knob_M", screw_radius(screw) * 20))
         union() {
             render() difference() {
-                cylinder(r = knob_stem_r, h = knob_thickness + knob_stem_h);
+                cylinder(r = stem_r, h = knob_h);
 
                 hanging_hole(knob_nut_trap_depth(screw), screw_clearance_radius(screw))
                     rotate(45)
-                        circle(r = nut_trap_radius(screw_nut(screw)), $fn = 6);
+                        circle(r = trap_r, $fn = 6);
             }
-            linear_extrude(knob_thickness, convexity = 3)
-                difference() {
-                    polygon(points = [for(a = [0 : 359]) [wave(a) * sin(a), wave(a) * cos(a)]]);
+            for(i = [0 : 1])
+                linear_extrude(i ? flange_t : round_to_layer(wall), convexity = 3)
+                    difference() {
+                        shape();
 
-                    circle(knob_stem_r - eps);
-                }
+                        if(i && ! solid)
+                            offset(-wall)
+                                shape();
+
+                        circle(stem_r - eps);
+                    }
         }
 }
 
 //! Place the screw through the printed part
-module screw_knob_assembly(screw, length) //! Assembly with the screw in place
-assembly(str("screw_knob_M", 20 * screw_radius(screw), "_", length), ngb = true) {
-    translate_z(knob_height)
-        vflip()
-            stl_colour(pp1_colour) screw_knob(screw);
+module screw_knob_assembly(type, length) { //! Assembly with the screw in place
+    type = !is_list(type[0]) ? screw_knob(type) : type;
+    screw = screw_knob_screw(type);
+    knob_h = knob_height(type);
 
-    translate_z(knob_height - knob_nut_trap_depth(screw))
-        rotate(-45)
-            screw(screw, length);
+    assembly(str("screw_knob_M", 20 * screw_radius(screw), "_", length), ngb = true) {
+        translate_z(knob_h)
+            vflip()
+                stl_colour(pp1_colour) screw_knob(type);
+
+        translate_z(knob_h - knob_nut_trap_depth(screw))
+            rotate(-45)
+                screw(screw, length);
+    }
 }
 
 module screw_knob_M30_stl() screw_knob(M3_hex_screw);

readme.md

@@ -23,30 +23,32 @@ A list of changes classified as breaking, additions or fixes is maintained in [C
 <th align="left"> Vitamins A-H </th><th align="left"> Vitamins I-Q </th><th align="left"> Vitamins R-Z </th><th align="left"> Printed </th><th align="left"> Utilities </th><th align="left"> Core Utilities </th></tr>
 <tr><td> <a href = "#7_segments">7_segments</a> </td><td> <a href = "#IECs">IECs</a> </td><td> <a href = "#Rails">Rails</a> </td><td> <a href = "#Box">Box</a> </td><td> <a href = "#Annotation">Annotation</a> </td><td> <a href = "#BOM">BOM</a> </td></tr>
 <tr><td> <a href = "#Axials">Axials</a> </td><td> <a href = "#Inserts">Inserts</a> </td><td> <a href = "#Ring_terminals">Ring_terminals</a> </td><td> <a href = "#Butt_box">Butt_box</a> </td><td> <a href = "#Bezier">Bezier</a> </td><td> <a href = "#Clip">Clip</a> </td></tr>
-<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
-<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
-<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
-<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
-<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
-<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
-<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
-<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
-<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
-<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
-<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
-<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
-<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Knob">Knob</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
-<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
-<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
-<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Terminals">Terminals</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
-<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
-<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
-<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Potentiometers">Potentiometers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
-<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#BLDC_motors">BLDC_motors</a> </td><td> <a href = "#Jack">Jack</a> </td><td> <a href = "#Rockers">Rockers</a> </td><td> <a href = "#Cable_clip">Cable_clip</a> </td><td> <a href = "#Catenary">Catenary</a> </td><td> <a href = "#Global">Global</a> </td></tr>
+<tr><td> <a href = "#Ball_bearings">Ball_bearings</a> </td><td> <a href = "#LDRs">LDRs</a> </td><td> <a href = "#Rod">Rod</a> </td><td> <a href = "#Cable_grommets">Cable_grommets</a> </td><td> <a href = "#Core_xy">Core_xy</a> </td><td> <a href = "#Polyholes">Polyholes</a> </td></tr>
+<tr><td> <a href = "#Batteries">Batteries</a> </td><td> <a href = "#LED_meters">LED_meters</a> </td><td> <a href = "#SK_brackets">SK_brackets</a> </td><td> <a href = "#Camera_housing">Camera_housing</a> </td><td> <a href = "#Dogbones">Dogbones</a> </td><td> <a href = "#Rounded_rectangle">Rounded_rectangle</a> </td></tr>
+<tr><td> <a href = "#Bearing_blocks">Bearing_blocks</a> </td><td> <a href = "#LEDs">LEDs</a> </td><td> <a href = "#SMDs">SMDs</a> </td><td> <a href = "#Carriers">Carriers</a> </td><td> <a href = "#Fillet">Fillet</a> </td><td> <a href = "#Sphere">Sphere</a> </td></tr>
+<tr><td> <a href = "#Belts">Belts</a> </td><td> <a href = "#Leadnuts">Leadnuts</a> </td><td> <a href = "#SSRs">SSRs</a> </td><td> <a href = "#Corner_block">Corner_block</a> </td><td> <a href = "#Gears">Gears</a> </td><td> <a href = "#Teardrops">Teardrops</a> </td></tr>
+<tr><td> <a href = "#Blowers">Blowers</a> </td><td> <a href = "#Light_strips">Light_strips</a> </td><td> <a href = "#Screws">Screws</a> </td><td> <a href = "#Door_hinge">Door_hinge</a> </td><td> <a href = "#Hanging_hole">Hanging_hole</a> </td><td></td></tr>
+<tr><td> <a href = "#Box_sections">Box_sections</a> </td><td> <a href = "#Linear_bearings">Linear_bearings</a> </td><td> <a href = "#Sealing_strip">Sealing_strip</a> </td><td> <a href = "#Door_latch">Door_latch</a> </td><td> <a href = "#Horiholes">Horiholes</a> </td><td></td></tr>
+<tr><td> <a href = "#Bulldogs">Bulldogs</a> </td><td> <a href = "#Magnets">Magnets</a> </td><td> <a href = "#Servo_motors">Servo_motors</a> </td><td> <a href = "#Drag_chain">Drag_chain</a> </td><td> <a href = "#Layout">Layout</a> </td><td></td></tr>
+<tr><td> <a href = "#Buttons">Buttons</a> </td><td> <a href = "#Mains_sockets">Mains_sockets</a> </td><td> <a href = "#Shaft_couplings">Shaft_couplings</a> </td><td> <a href = "#Fan_guard">Fan_guard</a> </td><td> <a href = "#Maths">Maths</a> </td><td></td></tr>
+<tr><td> <a href = "#Cable_strips">Cable_strips</a> </td><td> <a href = "#Microswitches">Microswitches</a> </td><td> <a href = "#Sheets">Sheets</a> </td><td> <a href = "#Fixing_block">Fixing_block</a> </td><td> <a href = "#Offset">Offset</a> </td><td></td></tr>
+<tr><td> <a href = "#Cameras">Cameras</a> </td><td> <a href = "#Microview">Microview</a> </td><td> <a href = "#Spades">Spades</a> </td><td> <a href = "#Flat_hinge">Flat_hinge</a> </td><td> <a href = "#Quadrant">Quadrant</a> </td><td></td></tr>
+<tr><td> <a href = "#Circlips">Circlips</a> </td><td> <a href = "#Modules">Modules</a> </td><td> <a href = "#Spools">Spools</a> </td><td> <a href = "#Foot">Foot</a> </td><td> <a href = "#Round">Round</a> </td><td></td></tr>
+<tr><td> <a href = "#Components">Components</a> </td><td> <a href = "#Nuts">Nuts</a> </td><td> <a href = "#Springs">Springs</a> </td><td> <a href = "#Handle">Handle</a> </td><td> <a href = "#Rounded_cylinder">Rounded_cylinder</a> </td><td></td></tr>
+<tr><td> <a href = "#DIP">DIP</a> </td><td> <a href = "#O_ring">O_ring</a> </td><td> <a href = "#Stepper_motors">Stepper_motors</a> </td><td> <a href = "#Knob">Knob</a> </td><td> <a href = "#Rounded_polygon">Rounded_polygon</a> </td><td></td></tr>
+<tr><td> <a href = "#D_connectors">D_connectors</a> </td><td> <a href = "#Opengrab">Opengrab</a> </td><td> <a href = "#Swiss_clips">Swiss_clips</a> </td><td> <a href = "#LED_bezel">LED_bezel</a> </td><td> <a href = "#Rounded_triangle">Rounded_triangle</a> </td><td></td></tr>
+<tr><td> <a href = "#Displays">Displays</a> </td><td> <a href = "#PCB">PCB</a> </td><td> <a href = "#Terminals">Terminals</a> </td><td> <a href = "#PCB_mount">PCB_mount</a> </td><td> <a href = "#Sector">Sector</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusion_brackets">Extrusion_brackets</a> </td><td> <a href = "#PCBs">PCBs</a> </td><td> <a href = "#Toggles">Toggles</a> </td><td> <a href = "#PSU_shroud">PSU_shroud</a> </td><td> <a href = "#Sweep">Sweep</a> </td><td></td></tr>
+<tr><td> <a href = "#Extrusions">Extrusions</a> </td><td> <a href = "#PSUs">PSUs</a> </td><td> <a href = "#Transformers">Transformers</a> </td><td> <a href = "#Pocket_handle">Pocket_handle</a> </td><td> <a href = "#Thread">Thread</a> </td><td></td></tr>
+<tr><td> <a href = "#Fans">Fans</a> </td><td> <a href = "#Panel_meters">Panel_meters</a> </td><td> <a href = "#Tubings">Tubings</a> </td><td> <a href = "#Press_fit">Press_fit</a> </td><td> <a href = "#Tube">Tube</a> </td><td></td></tr>
+<tr><td> <a href = "#Fuseholder">Fuseholder</a> </td><td> <a href = "#Pillars">Pillars</a> </td><td> <a href = "#Variacs">Variacs</a> </td><td> <a href = "#Printed_box">Printed_box</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Geared_steppers">Geared_steppers</a> </td><td> <a href = "#Pillow_blocks">Pillow_blocks</a> </td><td> <a href = "#Veroboard">Veroboard</a> </td><td> <a href = "#Printed_pulleys">Printed_pulleys</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Green_terminals">Green_terminals</a> </td><td> <a href = "#Pin_headers">Pin_headers</a> </td><td> <a href = "#Washers">Washers</a> </td><td> <a href = "#Ribbon_clamp">Ribbon_clamp</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hot_ends">Hot_ends</a> </td><td> <a href = "#Potentiometers">Potentiometers</a> </td><td> <a href = "#Wire">Wire</a> </td><td> <a href = "#SSR_shroud">SSR_shroud</a> </td><td></td><td></td></tr>
+<tr><td> <a href = "#Hygrometer">Hygrometer</a> </td><td> <a href = "#Pulleys">Pulleys</a> </td><td> <a href = "#Zipties">Zipties</a> </td><td> <a href = "#Screw_knob">Screw_knob</a> </td><td></td><td></td></tr>
+<tr><td></td><td></td><td></td><td> <a href = "#Socket_box">Socket_box</a> </td><td></td><td></td></tr>
+<tr><td></td><td></td><td></td><td> <a href = "#Strap_handle">Strap_handle</a> </td><td></td><td></td></tr>
 </table>
 
 ---
@@ -108,7 +110,7 @@ Axial components for PCBs.
 | Module | Description |
 |:--- |:--- |
 | `ax_res(type, value, tol = 5, pitch = 0)` | Through hole axial resistor. If `pitch` is zero the minimum is used. If below the minimum the resistor is placed vertical. |
-| `wire_link(d, l, h = 1, tail = 3)` | Draw a wire jumper link. |
+| `wire_link(d, l, h = 1, tail = 3)` | Draw a wire jumper link. If `l` is zero then a vertical wire is drawn. |
 
 ![axials](tests/png/axials.png)
 
@@ -123,6 +125,7 @@ Axial components for PCBs.
 |   1 | `ax_res(res1_2, 8200)` |  Resistor 8200 Ohms 5% 0.5W |
 |   1 | `ax_res(res1_2, 8250, tol = 1)` |  Resistor 8250 Ohms 1% 0.5W |
 |   1 | `wire_link(0.8, 10.16)` |  Wire link 0.8mm x 0.4" |
+|   1 | `wire_link(0.8, 0, h = 5)` |  Wire link 0.8mm x 8mm |
 
 
 <a href="#top">Top</a>
@@ -232,8 +235,9 @@ exposing enough information to make a battery box.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   6 | `battery_contact(bcontact, false)` |  Battery negative contact |
-|   6 | `battery_contact(bcontact, true)` |  Battery positive contact |
+|   7 | `battery_contact(bcontact, false)` |  Battery negative contact |
+|   7 | `battery_contact(bcontact, true)` |  Battery positive contact |
+|   1 | `battery(A23CELL)` |  Cell A23 12v |
 |   1 | `battery(AACELL)` |  Cell AA |
 |   1 | `battery(AAACELL)` |  Cell AAA |
 |   1 | `battery(CCELL)` |  Cell C |
@@ -368,7 +372,7 @@ Individual teeth are not drawn, instead they are represented by a lighter colour
 |   1 | `belt(T2p5x6, [ ... ])` |  Belt T2.5 x 6mm x 130mm |
 |   1 | `belt(T5x10, [ ... ])` |  Belt T5 x 10mm x 130mm |
 |   1 | `belt(T5x6, [ ... ])` |  Belt T5 x 6mm x 130mm |
-|   2 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   2 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   2 | `pulley(GT2x16_toothed_idler)` |  Pulley GT2 idler 16 teeth |
 |   4 | `pulley(GT2x20_toothed_idler)` |  Pulley GT2 idler 20 teeth |
 |   6 | `pulley(GT2x16_plain_idler)` |  Pulley GT2 idler smooth 9.63mm |
@@ -1509,6 +1513,7 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
 | Function | Description |
 |:--- |:--- |
 | `insert_boss_radius(type, wall)` | Compute the outer radius of an insert boss |
+| `insert_hole_length(type)` | Length of the insert rounded to layer height |
 | `insert_nose_length(type, d)` | The length before the second ring. |
 
 ### Modules
@@ -1524,10 +1529,14 @@ Heatfit threaded inserts. Can be pushed into thermoplastics using a soldering ir
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `insert(F1BM2)` |  Heatfit insert M2 |
-|   1 | `insert(F1BM2p5)` |  Heatfit insert M2.5 |
-|   1 | `insert(F1BM3)` |  Heatfit insert M3 |
-|   1 | `insert(F1BM4)` |  Heatfit insert M4 |
+|   2 | `insert(F1BM2)` |  Heatfit insert M2 x 4mm |
+|   1 | `insert(CNCKM2p5)` |  Heatfit insert M2.5 x 4mm |
+|   1 | `insert(F1BM2p5)` |  Heatfit insert M2.5 x 5.8mm |
+|   1 | `insert(CNCKM3)` |  Heatfit insert M3 x 3mm |
+|   1 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
+|   1 | `insert(CNCKM4)` |  Heatfit insert M4 x 4mm |
+|   1 | `insert(F1BM4)` |  Heatfit insert M4 x 8.2mm |
+|   2 | `insert(CNCKM5)` |  Heatfit insert M5 x 5.8mm |
 
 
 <a href="#top">Top</a>
@@ -1642,6 +1651,16 @@ Nuts for leadscrews.
 | `leadnut_od(type)` | Outer diameter of the shank |
 | `leadnut_pitch(type)` | Screw pitch |
 | `leadnut_screw(type)` | The type of the fixing screws |
+| `leadnuthousing_height(type)` | Height of housing |
+| `leadnuthousing_hole_pos(type)` | Offset from center for nut hole |
+| `leadnuthousing_length(type)` | Length of housing |
+| `leadnuthousing_mount_screw(type)` | Mounting screw |
+| `leadnuthousing_mount_screw_len(type)` | Mounting screw length |
+| `leadnuthousing_nut(type)` | Nut type this is suitable for |
+| `leadnuthousing_nut_screw_length(type)` | Length of mounting screw for nut |
+| `leadnuthousing_screw_dist_l(type)` | Distance between mounting holes length |
+| `leadnuthousing_screw_dist_w(type)` | Distance between mounting holes width |
+| `leadnuthousing_width(type)` | Width of housing |
 
 ### Functions
 | Function | Description |
@@ -1653,15 +1672,21 @@ Nuts for leadscrews.
 |:--- |:--- |
 | `leadnut(type)` | Draw specified leadnut |
 | `leadnut_screw_positions(type)` | Position children at the screw holes |
+| `leadnuthousing(type)` | Nut housing, to connect a lead nut to another object |
+| `leadnuthousing_nut_position(type)` | The position of the nut may be off-center, use this to get the position |
+| `leadnuthousing_nut_screw_positions(type)` | get screw positions to mount the nut to the nut housing |
+| `leadnuthousing_screw_positions(type)` | Get screw positions to mount the leadnut housing |
 
 ![leadnuts](tests/png/leadnuts.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `leadnut(LSN8x2)` |  Leadscrew nut 8 x 2 |
+|   1 | `nuthousing(LNHT8x2)` |  Lead Screw Nut Housing T8 |
+|   2 | `leadnut(LSN8x2)` |  Leadscrew nut 8 x 2 |
 |   1 | `leadnut(LSN8x8)` |  Leadscrew nut 8 x 8 RobotDigg |
 |   1 | `leadnut(SFU1610)` |  Leadscrew nut for SFU1610 |
+|   4 | `screw(M3_cap_screw, 15)` |  Screw M3 cap x 15mm |
 
 
 <a href="#top">Top</a>
@@ -1764,9 +1789,10 @@ Standard domed through hole LEDs. Can specify colour and lead length.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `led(LED10mm)` |  LED 10 mm red |
+|   1 | `led(LED10mm, "orange")` |  LED 10 mm orange |
 |   1 | `led(LED3mm, "green")` |  LED 3 mm green |
 |   1 | `led(LED5mm, "blue")` |  LED 5 mm blue |
+|   1 | `led(LED8mm)` |  LED 8 mm red |
 
 
 <a href="#top">Top</a>
@@ -2399,6 +2425,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `usb_Ax2(cutout = false)` | Draw USB type A dual socket |
 | `usb_B(cutout = false)` | Draw USB B connector |
 | `usb_C(cutout = false)` | Draw USB C connector |
+| `usb_miniA(cutout = false)` | Draw USB mini A connector |
 | `usb_uA(cutout = false)` | Draw USB micro A connector |
 | `vero_pin(cropped = false)` | Draw a vero pin |
 
@@ -2435,12 +2462,18 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `ax_res(res1_8, 1e+6, tol = 1)` |  Resistor 1e+6 Ohms 1% 0.125W |
 |   1 | `smd_led(LED0603, orange)` |  SMD LED 0603 orange |
 |   1 | `smd_led(LED0805, red)` |  SMD LED 0805 red |
+|   1 | `smd_led(LED1206, blue)` |  SMD LED 1306 blue |
 |   1 | `smd_capacitor(CAP0603)` |  SMD capacitor 0603 |
 |   1 | `smd_capacitor(CAP0805)` |  SMD capacitor 0805 |
 |   1 | `smd_capacitor(CAP1206)` |  SMD capacitor 1206 |
 |   1 | `smd_resistor(RES0603, 1K)` |  SMD resistor 0603 1K 0.1W |
 |   1 | `smd_resistor(RES0805, 1K)` |  SMD resistor 0805 1K 0.125W |
 |   1 | `smd_resistor(RES1206, 1K)` |  SMD resistor 1206 1K 0.25W |
+|   1 | `smd_soic(SOIC16)` |  SOIC16 package ICL323 |
+|   1 | `smd_soic(SOIC18)` |  SOIC18 package PIC18F88 |
+|   1 | `smd_soic(SOIC8)` |  SOIC8 package M34063 |
+|   1 | `smd_sot(SOT223)` |  SOT223 package LM117 |
+|   1 | `smd_sot(SOT23)` |  SOT23 package 2N7000 |
 |   1 | `square_button(button_4p5mm)` |  Square button 4.5mm |
 |   1 | `square_button(button_6mm)` |  Square button 6mm |
 |   1 | `pcb(TMC2130)` |  TMC2130 |
@@ -2457,6 +2490,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   2 | `vero_pin()` |  Vero board pin |
 |   1 | `wire_link(0.8, 5.08, h = 10.16)` |  Wire link 0.8mm x 0.2" |
 |   1 | `wire_link(0.8, 10.16)` |  Wire link 0.8mm x 0.4" |
+|   1 | `wire_link(0.8, 0, h = 5)` |  Wire link 0.8mm x 8mm |
 
 
 <a href="#top">Top</a>
@@ -2546,6 +2580,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 | `usb_Ax2(cutout = false)` | Draw USB type A dual socket |
 | `usb_B(cutout = false)` | Draw USB B connector |
 | `usb_C(cutout = false)` | Draw USB C connector |
+| `usb_miniA(cutout = false)` | Draw USB mini A connector |
 | `usb_uA(cutout = false)` | Draw USB micro A connector |
 | `vero_pin(cropped = false)` | Draw a vero pin |
 
@@ -2572,6 +2607,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(ExtruderPCB)` |  Extruder connection PCB - not shown |
 |   1 | `pcb(KY_040)` |  KY-040 rotart encoder breakout |
 |   1 | `pcb(Keyes5p1)` |  Keyes5.1 Arduino Uno expansion board - not shown |
+|   1 | `pcb(L9110S)` |  L9110S 2-Channel motor driver module |
 |   1 | `pcb(LIPO_fuel_gauge)` |  LIPO fuel gauge |
 |   1 | `pcb(MP1584EN)` |  MP1584EN 3A buck converter |
 |   1 | `pcb(MT3608)` |  MT3608 boost converter module |
@@ -2582,7 +2618,7 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `molex_254(3)` |  Molex KK header 3 way - not shown |
 |  20 | `nut(M2_nut, nyloc = true)` |  Nut M2 x 1.6mm nyloc |
 |  30 | `nut(M2p5_nut, nyloc = true)` |  Nut M2.5 x 2.2mm nyloc |
-|  32 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
+|  36 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   8 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
 |   1 | `pcb(PI_IO)` |  PI_IO V2 - not shown |
 |   1 | `pcb(PSU12V1A)` |  PSU 12V 1A - not shown |
@@ -2605,10 +2641,12 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   8 | `screw(M2p5_cap_screw, 30)` |  Screw M2.5 cap x 30mm |
 |   4 | `screw(M2p5_pan_screw, 20)` |  Screw M2.5 pan x 20mm |
 |   8 | `screw(M2p5_pan_screw, 25)` |  Screw M2.5 pan x 25mm |
-|  10 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
-|  13 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
-|   9 | `screw(M3_cap_screw, 35)` |  Screw M3 cap x 35mm |
-|   8 | `screw(M4_cap_screw, 35)` |  Screw M4 cap x 35mm |
+|   8 | `screw(M3_cap_screw, 16)` |  Screw M3 cap x 16mm |
+|   6 | `screw(M3_cap_screw, 20)` |  Screw M3 cap x 20mm |
+|   8 | `screw(M3_cap_screw, 30)` |  Screw M3 cap x 30mm |
+|  14 | `screw(M3_cap_screw, 35)` |  Screw M3 cap x 35mm |
+|   4 | `screw(M4_cap_screw, 35)` |  Screw M4 cap x 35mm |
+|   4 | `screw(M4_cap_screw, 40)` |  Screw M4 cap x 40mm |
 |   1 | `pcb(XIAO)` |  Seeeduino XIAO |
 |   1 | `pcb(TP4056)` |  TP4056 Li-lon Battery charger module |
 |   3 | `terminal_35(2)` |  Terminal block 2 way 3.5mm - not shown |
@@ -2617,34 +2655,37 @@ PCBs and perfboard with optional components. The shape can be a rectangle with o
 |   1 | `pcb(WD2002SJ)` |  WD2002SJ Buck Boost DC-DC converter |
 |  20 | `washer(M2_washer)` |  Washer  M2 x 5mm x 0.3mm |
 |  30 | `washer(M2p5_washer)` |  Washer  M2.5 x 5.9mm x 0.5mm |
-|  32 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+|  36 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   8 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 |   1 | `pcb(ZC_A0591)` |  ZC-A0591 ULN2003 driver PCB |
 
 ### Printed
 | Qty | Filename |
 | ---:|:--- |
-|   8 | pcb_spacer20100.stl |
+|   4 | pcb_spacer20100.stl |
+|   4 | pcb_spacer20110.stl |
 |   4 | pcb_spacer2070.stl |
 |   4 | pcb_spacer2080.stl |
 |   4 | pcb_spacer2090.stl |
-|   4 | pcb_spacer25120.stl |
 |   4 | pcb_spacer25130.stl |
-|   4 | pcb_spacer25140_2.stl |
+|   4 | pcb_spacer25140.stl |
 |   4 | pcb_spacer25150_2.stl |
-|   4 | pcb_spacer25170.stl |
+|   4 | pcb_spacer25160_2.stl |
 |   4 | pcb_spacer25180.stl |
+|   4 | pcb_spacer25190.stl |
 |   2 | pcb_spacer2550.stl |
-|   4 | pcb_spacer2580.stl |
-|   4 | pcb_spacer30160.stl |
-|   4 | pcb_spacer30190.stl |
-|   5 | pcb_spacer30200.stl |
+|   4 | pcb_spacer2590.stl |
+|   4 | pcb_spacer30170.stl |
+|   4 | pcb_spacer30200.stl |
 |   5 | pcb_spacer30210.stl |
-|   4 | pcb_spacer30220.stl |
+|   5 | pcb_spacer30220.stl |
+|   4 | pcb_spacer30230.stl |
 |   4 | pcb_spacer3050.stl |
-|   6 | pcb_spacer3060.stl |
-|   4 | pcb_spacer40230.stl |
+|   4 | pcb_spacer3060.stl |
+|   2 | pcb_spacer3070.stl |
+|   4 | pcb_spacer3080.stl |
 |   4 | pcb_spacer40240.stl |
+|   4 | pcb_spacer40250.stl |
 
 
 <a href="#top">Top</a>
@@ -3294,6 +3335,7 @@ For an explanation of `screw_polysink()` see <https://hydraraptor.blogspot.com/2
 |:--- |:--- |
 | `screw_boss_diameter(type)` | Boss big enough for nut trap and washer |
 | `screw_head_depth(type, d = 0)` | How far a counter sink head will go into a straight hole diameter d |
+| `screw_insert(screw, short = false, i = 0)` | Find insert to fit specified screw, defaults to longest but can specify the shortest |
 | `screw_length(screw, thickness, washers, insert = false, nyloc = false, nut = false, longer = false)` | Returns the length of the longest or shortest screw that will got through `thickness` and `washers` and possibly an `insert`, `nut` or `nyloc` |
 | `screw_longer_than(x)` | Returns the length of the shortest screw length longer or equal to x |
 | `screw_nut_radius(type)` | Radius of matching nut |
@@ -3457,6 +3499,7 @@ Shaft couplings
 | `sc_diameter(type)` | Coupling outer diameter |
 | `sc_diameter1(type)` | Diameter of smaller shaft |
 | `sc_diameter2(type)` | Diameter of larger shaft |
+| `sc_flexible(type)` | Flexible coupling |
 | `sc_length(type)` | Coupling length |
 
 ### Modules
@@ -3470,6 +3513,7 @@ Shaft couplings
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
 |   1 | `shaft_coupling(SC_5x8_rigid)` |  Shaft coupling SC_5x8_rigid |
+|   1 | `shaft_coupling(SC_6x8_flex)` |  Shaft coupling SC_6x8_flex |
 
 
 <a href="#top">Top</a>
@@ -3634,6 +3678,19 @@ Surface mount components for PCBs.
 | `smd_res_end_cap(type)` | End cap width |
 | `smd_res_power(type)` | Power rating in Watts |
 | `smd_res_size(type)` | Body length, width and height |
+| `smd_soic_lead_pitch(type)` | Lead pitch |
+| `smd_soic_lead_size(type)` | Lead width, foot depth, lead thickness |
+| `smd_soic_lead_span(type)` | Total span of leads |
+| `smd_soic_lead_z(type)` | Top of lead frame from top |
+| `smd_soic_size(type)` | Body length, width and height |
+| `smd_soic_z(type)` | Height above PCB surface |
+| `smd_sot_lead_pitch(type)` | Lead pitch |
+| `smd_sot_lead_size(type)` | Lead width, foot depth, lead thickness |
+| `smd_sot_lead_span(type)` | Total span of leads |
+| `smd_sot_lead_z(type)` | Top of lead frame from top |
+| `smd_sot_size(type)` | Body length, width and height |
+| `smd_sot_tab_width(type)` | The wide lead at the top |
+| `smd_sot_z(type)` | Height above PCB surface |
 
 ### Functions
 | Function | Description |
@@ -3645,9 +3702,11 @@ Surface mount components for PCBs.
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `smd_capacitor(type, height)` | Draw an SMD capacitor with specified height |
+| `smd_capacitor(type, height, value = undef)` | Draw an SMD capacitor with specified height |
 | `smd_led(type, colour, cutout)` | Draw an SMD LED with specified `colour` |
 | `smd_resistor(type, value)` | Draw an SMD resistor with specified value |
+| `smd_soic(type, value)` | Draw an SMD SOIC |
+| `smd_sot(type, value)` | Draw an SMD transistor |
 
 ![smds](tests/png/smds.png)
 
@@ -3656,12 +3715,18 @@ Surface mount components for PCBs.
 | ---:|:--- |:---|
 |   1 | `smd_led(LED0603, green)` |  SMD LED 0603 green |
 |   1 | `smd_led(LED0805, blue)` |  SMD LED 0805 blue |
+|   1 | `smd_led(LED1206, red)` |  SMD LED 1306 red |
 |   1 | `smd_capacitor(CAP0603)` |  SMD capacitor 0603 |
 |   1 | `smd_capacitor(CAP0805)` |  SMD capacitor 0805 |
 |   1 | `smd_capacitor(CAP1206)` |  SMD capacitor 1206 |
 |   1 | `smd_resistor(RES0603, 1R0)` |  SMD resistor 0603 1R0 0.1W |
 |   1 | `smd_resistor(RES0805, 10M)` |  SMD resistor 0805 10M 0.125W |
 |   1 | `smd_resistor(RES1206, 100K)` |  SMD resistor 1206 100K 0.25W |
+|   1 | `smd_soic(SOIC16)` |  SOIC16 package SOIC16 |
+|   1 | `smd_soic(SOIC18)` |  SOIC18 package SOIC18 |
+|   1 | `smd_soic(SOIC8)` |  SOIC8 package SOIC8 |
+|   1 | `smd_sot(SOT223)` |  SOT223 package FZT851 |
+|   1 | `smd_sot(SOT23)` |  SOT23 package 2N7000 |
 
 
 <a href="#top">Top</a>
@@ -3868,6 +3933,7 @@ NEMA stepper motor model.
 | Function | Description |
 |:--- |:--- |
 | `NEMA_big_hole(type)` | Clearance hole for the big boss |
+| `NEMA_connection_pos(type, jst_connector = false)` | Position of the wires or the connector |
 | `NEMA_holes(type)` | Screw positions for for loop |
 
 ### Modules
@@ -3876,7 +3942,7 @@ NEMA stepper motor model.
 | `NEMA(type, shaft_angle = 0, jst_connector = false)` | Draw specified NEMA stepper motor |
 | `NEMA_outline(type)` | 2D outline |
 | `NEMA_screw_positions(type, n = 4)` | Positions children at the screw holes |
-| `NEMA_screws(type, screw, n = 4, screw_length = 8, earth = undef)` | Place screws and optional earth tag |
+| `NEMA_screws(type, screw, n = 4, screw_length = 8, earth = undef, earth_rot = undef)` | Place screws and optional earth tag |
 
 ![stepper_motors](tests/png/stepper_motors.png)
 
@@ -3885,15 +3951,15 @@ NEMA stepper motor model.
 | ---:|:--- |:---|
 |   4 | `ring_terminal(M3_ringterm)` |  Ring terminal 3mm |
 |  20 | `screw(M3_pan_screw, 8)` |  Screw M3 pan x  8mm |
-|   1 | `NEMA(NEMA14)` |  Stepper motor NEMA14 x 36mm |
-|   1 | `NEMA(NEMA16)` |  Stepper motor NEMA16 x 19.2mm |
-|   1 | `NEMA(NEMA17P)` |  Stepper motor NEMA17 x 26.5mm |
-|   1 | `NEMA(NEMA17S)` |  Stepper motor NEMA17 x 34mm |
-|   1 | `NEMA(NEMA17M)` |  Stepper motor NEMA17 x 40mm |
-|   1 | `NEMA(NEMA17)` |  Stepper motor NEMA17 x 47mm |
-|   1 | `NEMA(NEMA23)` |  Stepper motor NEMA22 x 51.2mm |
-|   1 | `NEMA(NEMA8)` |  Stepper motor NEMA8 x 30mm |
-|   1 | `NEMA(NEMA8BH)` |  Stepper motor NEMA8 x 30mm |
+|   1 | `NEMA(NEMA14_36)` |  Stepper motor NEMA14 x 36mm |
+|   1 | `NEMA(NEMA16_19)` |  Stepper motor NEMA16 x 19.2mm |
+|   1 | `NEMA(NEMA17_27)` |  Stepper motor NEMA17 x 26.5mm |
+|   1 | `NEMA(NEMA17_34)` |  Stepper motor NEMA17 x 34mm |
+|   1 | `NEMA(NEMA17_40)` |  Stepper motor NEMA17 x 40mm |
+|   1 | `NEMA(NEMA17_47)` |  Stepper motor NEMA17 x 47mm |
+|   1 | `NEMA(NEMA23_51)` |  Stepper motor NEMA22 x 51.2mm |
+|   1 | `NEMA(NEMA8_30)` |  Stepper motor NEMA8 x 30mm |
+|   1 | `NEMA(NEMA8_30BH)` |  Stepper motor NEMA8 x 30mm |
 |  16 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |  20 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
 
@@ -4227,6 +4293,7 @@ Veroboard with mounting holes, track breaks, removed tracks, solder points and c
 ### Functions
 | Function | Description |
 |:--- |:--- |
+| `vero(name, assembly, holes, strips, pitch = 2.54, fr4 = false, screw = M3_cap_screw, mounting_holes = [], breaks = [], no_tracks = [], components = [], joints = [])` | Constructor |
 | `vero_length(type)` | Length of the board |
 | `vero_size(type)` | Board size |
 | `vero_thickness(type)` | Thickness of the substrate |
@@ -4237,6 +4304,7 @@ Veroboard with mounting holes, track breaks, removed tracks, solder points and c
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `solder_meniscus(type, ir = 0.3, r = undef)` | Draw a solder meniscus |
 | `vero_cutouts(type, angle = undef)` | Make cutouts to clear components |
 | `vero_grid_pos(type, x, y)` | Convert grid position to offset from the centre |
 | `vero_mounting_hole_positions(type)` | Positions children at the mounting holes |
@@ -4253,7 +4321,7 @@ Veroboard with mounting holes, track breaks, removed tracks, solder points and c
 |   4 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
 |   4 | `screw(M3_dome_screw, 25)` |  Screw M3 dome x 25mm |
 |   2 | `green_terminal(gt_2p54, 10)` |  Terminal block 10 way 0.1" |
-|   2 | `veroboard(z_vb)` |  Veroboard 5 holes x 22strips |
+|   2 | `veroboard(z_vb)` |  Veroboard 5 holes x 22 strips |
 |   8 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 
 ### Printed
@@ -4365,7 +4433,7 @@ If a washer is given a child, usually a screw or a nut, then it is placed on its
 ---
 <a name="Wire"></a>
 ## Wire
-Just a BOM entry at the moment and cable bundle size functions for holes, plus cable ties.
+Utilities for adding wires to the BOM and optionally drawing them and cable bundle size functions for holes, plus cable ties.
 
 [vitamins/wire.scad](vitamins/wire.scad) Implementation.
 
@@ -4374,17 +4442,25 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 ### Functions
 | Function | Description |
 |:--- |:--- |
-| `cable_bundle(cable)` | Arrangement of a bundle in a flat cable clip |
+| `cable(wires, size, colours, ribbon = false, tlen = 25)` | Cable constructor |
+| `cable_bundle(cable)` | Dimensions of the bounding rectangle of a bundle of wires in a flat cable clip |
+| `cable_bundle_positions(cable)` | Positions of wires in a bundle to go through a cable strip |
 | `cable_height(cable)` | Height in flat clip |
+| `cable_is_ribbon(cable)` | Is a ribbon cable? |
 | `cable_radius(cable)` | Radius of a bundle of wires, see <http://mathworld.wolfram.com/CirclePacking.html>. |
+| `cable_tlen(cable)` | Twisted cable twist length |
+| `cable_twisted_radius(cable)` | Approximate radius of a cable when twisted |
 | `cable_width(cable)` | Width in flat clip |
+| `cable_wire_colours(cable)` | Individual wire colours |
 | `cable_wire_size(cable)` | Size of each wire in a bundle |
 | `cable_wires(cable)` | Number of wires in a bundle |
+| `twisted_cable(cable, path, irot = 0, frot = 0)` | Return the paths for a twisted cable, `irot` is the initial rotation and frot the final rotation |
 | `wire_hole_radius(cable)` | Radius of a hole to accept a bundle of wires, rounded up to standard metric drill size |
 
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `cable(cable, paths)` | Draw a cable, given a list of paths |
 | `cable_tie(cable_r, thickness)` | A ziptie threaded around cable radius `cable_r` and through a panel with specified `thickness`. |
 | `cable_tie_holes(cable_r, h = 100)` | Holes to thread a ziptie through a panel to make a cable tie. |
 | `mouse_hole(cable, h = 100, teardrop = false)` | A mouse hole to allow a panel to go over a wire bundle. |
@@ -4396,13 +4472,13 @@ Just a BOM entry at the moment and cable bundle size functions for holes, plus c
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 |  |  Wire black 7/0.2mm strands, length 90mm |
-|   1 |  |  Wire blue 7/0.2mm strands, length 90mm |
-|   1 |  |  Wire brown 7/0.2mm strands, length 90mm |
-|   1 |  |  Wire green 7/0.2mm strands, length 90mm |
-|   1 |  |  Wire orange 7/0.2mm strands, length 90mm |
-|   1 |  |  Wire red 7/0.2mm strands, length 90mm |
-|   1 |  |  Wire yellow 7/0.2mm strands, length 90mm |
+|   1 |  |  Wire black 7/0.2mm strands, length 60mm |
+|   1 |  |  Wire blue 7/0.2mm strands, length 60mm |
+|   1 |  |  Wire brown 7/0.2mm strands, length 60mm |
+|   1 |  |  Wire green 7/0.2mm strands, length 60mm |
+|   1 |  |  Wire orange 7/0.2mm strands, length 60mm |
+|   1 |  |  Wire red 7/0.2mm strands, length 60mm |
+|   1 |  |  Wire yellow 7/0.2mm strands, length 60mm |
 |   1 | `ziptie(small_ziptie)` |  Ziptie 2.5mm x 100mm min length |
 
 
@@ -4528,7 +4604,7 @@ The top bezel can have an optional child, which is subtracted to allow modificat
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   8 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   8 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   4 | `screw(M3_dome_screw, 16)` |  Screw M3 dome x 16mm |
 |   4 | `screw(M3_dome_screw, 20)` |  Screw M3 dome x 20mm |
 |   2 | `sheet(DiBond, 143, 63, 1)` |  Sheet DiBond 143mm x 63mm x 3mm |
@@ -4632,7 +4708,7 @@ fixing_blocks along the sides.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|  60 | `insert(F1BM3)` |  Heatfit insert M3 |
+|  60 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |  44 | `screw(M3_dome_screw, 10)` |  Screw M3 dome x 10mm |
 |   4 | `screw(M3_dome_screw, 12)` |  Screw M3 dome x 12mm |
 |  12 | `screw(M3_dome_screw, 16)` |  Screw M3 dome x 16mm |
@@ -4668,6 +4744,51 @@ fixing_blocks along the sides.
 |  12 | fixing_block_M30_assembly |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="Cable_clip"></a>
+## Cable_clip
+Cable clips to order. Can be for one or two cables of different sizes.
+
+[printed/cable_clip.scad](printed/cable_clip.scad) Implementation.
+
+[tests/cable_clip.scad](tests/cable_clip.scad) Code for this example.
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `cable_clip_extent(screw, cable)` | How far it extends from the screw. |
+| `cable_clip_height(cable)` | Height given the `cable`. |
+| `cable_clip_offset(screw, cable)` | The offset of the cable from the screw |
+| `cable_clip_width(screw)` | Width given the `screw`. |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `cable_clip(screw, cable1, cable2 = 0)` | Create the STL for a single cable or two cable clip |
+| `cable_clip_assembly(screw, thickness, cable1, cable2 = 0)` | Cable clip with the fasteners |
+
+![cable_clip](tests/png/cable_clip.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   5 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
+|   2 | `screw(M3_dome_screw, 12)` |  Screw M3 dome x 12mm |
+|   3 | `screw(M3_dome_screw, 16)` |  Screw M3 dome x 16mm |
+|  10 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
+
+### Printed
+| Qty | Filename |
+| ---:|:--- |
+|   1 | cable_clip_30_10_13.stl |
+|   1 | cable_clip_30_1_14_2_14.stl |
+|   1 | cable_clip_30_1_60.stl |
+|   1 | cable_clip_30_3_14_4_14.stl |
+|   1 | cable_clip_30_5_14_6_14.stl |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -4824,7 +4945,7 @@ This allows the block and one set of fasteners to be on one assembly and the oth
 Star washers can be omitted by setting `star_washers` to false.
 
 A 2screw_block is a thinner version with two screws and two mating surfaces. It can be used as an alternative to fixing blocks when
-high lateral rigity is not required.
+high lateral rigidity is not required.
 
 [printed/corner_block.scad](printed/corner_block.scad) Implementation.
 
@@ -4833,42 +4954,42 @@ high lateral rigity is not required.
 ### Functions
 | Function | Description |
 |:--- |:--- |
-| `2screw_block_h_hole(screw = def_screw)` | Transform to front hole |
-| `2screw_block_holes(screw)` | List of transforms to both holes |
-| `2screw_block_v_hole(screw = def_screw)` | Transform to bottom hole |
-| `2screw_block_width(screw = def_screw)` | 2 screw block width is narrower, height and depth are as corner_block |
-| `corner_block_h_holes(screw = def_screw)` | List of transforms to side holes |
-| `corner_block_hole_offset(screw = def_screw)` | Hole offset from the edge |
-| `corner_block_holes(screw)` | List of transforms to all holes |
+| `2screw_block_h_hole(screw = def_screw, short_insert = false)` | Transform to front hole |
+| `2screw_block_holes(screw, short_insert = false)` | List of transforms to both holes |
+| `2screw_block_v_hole(screw = def_screw, short_insert = false)` | Transform to bottom hole |
+| `2screw_block_width(screw = def_screw, short_insert = false)` | 2 screw block width is narrower, height and depth are as corner_block |
+| `corner_block_h_holes(screw = def_screw, short_insert = false)` | List of transforms to side holes |
+| `corner_block_hole_offset(screw = def_screw, short_insert = false)` | Hole offset from the edge |
+| `corner_block_holes(screw, short_insert = false)` | List of transforms to all holes |
 | `corner_block_screw()` | Default screw type |
-| `corner_block_v_hole(screw = def_screw)` | Transform to bottom hole |
-| `corner_block_width(screw = def_screw)` | Block width, depth and height |
+| `corner_block_v_hole(screw = def_screw, short_insert = false)` | Transform to bottom hole |
+| `corner_block_width(screw = def_screw, short_insert = false)` | Block width, depth and height |
 
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `2screw_block(screw = def_screw, name = false)` | Generate the STL for a printed 2screw block |
-| `2screw_block_assembly(screw = def_screw, name = false)` | The printed block with inserts |
-| `2screw_block_h_hole(screw = def_screw)` | Place children at the front screw hole |
-| `2screw_block_holes(screw = def_screw)` | Place children at both screw holes |
-| `2screw_block_v_hole(screw = def_screw)` | Place children at the bottom screw hole |
-| `corner_block(screw = def_screw, name = false)` | Generate the STL for a printed corner block |
-| `corner_block_assembly(screw = def_screw, name = false)` | The printed block with inserts |
-| `corner_block_h_holes(screw = def_screw, index = undef)` | Place children at the side screw holes |
-| `corner_block_holes(screw = def_screw)` | Place children at all the holes |
-| `corner_block_v_hole(screw = def_screw)` | Place children at the bottom screw hole |
-| `fastened_2screw_block_assembly(thickness, screw = def_screw, thickness_below = undef, name = false, show_block = true, star_washers = true)` | Printed block with fasteners |
-| `fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, thickness_side2 = undef, name = false, show_block = true, star_washers = true)` | Printed block with all fasteners |
+| `2screw_block(screw = def_screw, name = false, short_insert = false)` | Generate the STL for a printed 2screw block |
+| `2screw_block_assembly(screw = def_screw, name = false, short_insert = false)` | The printed block with inserts |
+| `2screw_block_h_hole(screw = def_screw, short_insert = false)` | Place children at the front screw hole |
+| `2screw_block_holes(screw = def_screw, short_insert = false)` | Place children at both screw holes |
+| `2screw_block_v_hole(screw = def_screw, short_insert = false)` | Place children at the bottom screw hole |
+| `corner_block(screw = def_screw, name = false, short_insert = false)` | Generate the STL for a printed corner block |
+| `corner_block_assembly(screw = def_screw, name = false, short_insert = false)` | The printed block with inserts |
+| `corner_block_h_holes(screw = def_screw, index = undef, short_insert = false)` | Place children at the side screw holes |
+| `corner_block_holes(screw = def_screw, short_insert = false)` | Place children at all the holes |
+| `corner_block_v_hole(screw = def_screw, short_insert = false)` | Place children at the bottom screw hole |
+| `fastened_2screw_block_assembly(thickness, screw = def_screw, thickness_below = undef, name = false, show_block = true, star_washers = true, short_insert = false)` | Printed block with fasteners |
+| `fastened_corner_block_assembly(thickness, screw = def_screw, thickness_below = undef, thickness_side2 = undef, name = false, show_block = true, star_washers = true, short_insert = false)` | Printed block with all fasteners |
 
 ![corner_block](tests/png/corner_block.png)
 
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   5 | `insert(F1BM2)` |  Heatfit insert M2 |
-|   5 | `insert(F1BM2p5)` |  Heatfit insert M2.5 |
-|   5 | `insert(F1BM3)` |  Heatfit insert M3 |
-|   5 | `insert(F1BM4)` |  Heatfit insert M4 |
+|   5 | `insert(F1BM2)` |  Heatfit insert M2 x 4mm |
+|   5 | `insert(F1BM2p5)` |  Heatfit insert M2.5 x 5.8mm |
+|   5 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
+|   5 | `insert(F1BM4)` |  Heatfit insert M4 x 8.2mm |
 |   5 | `screw(M2_cap_screw, 8)` |  Screw M2 cap x  8mm |
 |   5 | `screw(M2p5_pan_screw, 10)` |  Screw M2.5 pan x 10mm |
 |   5 | `screw(M3_dome_screw, 10)` |  Screw M3 dome x 10mm |
@@ -5157,10 +5278,10 @@ Star washers can be omitted by setting `star_washers` to false.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   3 | `insert(F1BM2)` |  Heatfit insert M2 |
-|   3 | `insert(F1BM2p5)` |  Heatfit insert M2.5 |
-|   3 | `insert(F1BM3)` |  Heatfit insert M3 |
-|   3 | `insert(F1BM4)` |  Heatfit insert M4 |
+|   3 | `insert(F1BM2)` |  Heatfit insert M2 x 4mm |
+|   3 | `insert(F1BM2p5)` |  Heatfit insert M2.5 x 5.8mm |
+|   3 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
+|   3 | `insert(F1BM4)` |  Heatfit insert M4 x 8.2mm |
 |   3 | `screw(M2_cap_screw, 8)` |  Screw M2 cap x  8mm |
 |   3 | `screw(M2p5_pan_screw, 10)` |  Screw M2.5 pan x 10mm |
 |   3 | `screw(M3_dome_screw, 10)` |  Screw M3 dome x 10mm |
@@ -5307,7 +5428,7 @@ inserts don't grip well in rubber.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   1 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   1 | `nut(M4_nut, nyloc = true)` |  Nut M4 x 3.2mm nyloc |
 |   1 | `screw(M3_cap_screw, 8)` |  Screw M3 cap x  8mm |
 |   1 | `screw(M4_cap_screw, 16)` |  Screw M4 cap x 16mm |
@@ -5360,7 +5481,7 @@ Printed handle that can be printed without needing support material due to its t
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   2 | `insert(F1BM4)` |  Heatfit insert M4 |
+|   2 | `insert(F1BM4)` |  Heatfit insert M4 x 8.2mm |
 |   2 | `screw(M4_cap_screw, 16)` |  Screw M4 cap x 16mm |
 |   2 | `washer(M4_washer)` |  Washer  M4 x 9mm x 0.8mm |
 |   2 | `star_washer(M4_washer)` |  Washer star M4 x 0.8mm |
@@ -5383,7 +5504,7 @@ Printed handle that can be printed without needing support material due to its t
 ## Knob
 Parametric knobs for potentiometers and encoders.
 
-A knob can be constructed by specififying all the parameters or the potentiometer can be specified to customise it for its shaft with a recess to clear the nut, washer and thread.
+A knob can be constructed by specifying all the parameters or the potentiometer can be specified to customise it for its shaft with a recess to clear the nut, washer and thread.
 An optional skirt and / or a pointer can be specified.
 
 The STL includes a support membrane that needs to be cut out and a thread needs to be tapped for the grub screw.
@@ -5445,6 +5566,72 @@ The STL includes a support membrane that needs to be cut out and a thread needs
 |   1 | metric_pot_knob.stl |
 
 
+<a href="#top">Top</a>
+
+---
+<a name="LED_bezel"></a>
+## LED_bezel
+Printed LED bezels for panel mounting
+
+[printed/led_bezel.scad](printed/led_bezel.scad) Implementation.
+
+[tests/LED_bezel.scad](tests/LED_bezel.scad) Code for this example.
+
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `led_bezel_flange(type)` | Flange width |
+| `led_bezel_flange_t(type)` | Flange thickness |
+| `led_bezel_height(type)` | Total height |
+| `led_bezel_led(type)` | The LED |
+| `led_bezel_wall(type)` | Wall thickness |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `led_bezel(led, flange = 1, flange_h = 1, wall = 1, height = 8)` | Constructor |
+| `led_bezel_hole_r(type)` | Panel hole radius |
+| `led_bezel_r(type)` | Radius of the tube |
+
+### Modules
+| Module | Description |
+|:--- |:--- |
+| `led_bezel(type)` | Makes the STL for the bezel |
+| `led_bezel_assembly(type, colour = "red")` | Led bezel with LED |
+| `led_bezel_fastened_assembly(type, t, colour = "red")` | Led bezel fitted to panel with  and retaining ring |
+| `led_bezel_retainer(type)` | Makes the STL for the retaining ring |
+
+![led_bezel](tests/png/led_bezel.png)
+
+### Vitamins
+| Qty | Module call | BOM entry |
+| ---:|:--- |:---|
+|   1 | `led(LED10mm, "orange")` |  LED 10 mm orange |
+|   1 | `led(LED3mm, "yellow")` |  LED 3 mm yellow |
+|   1 | `led(LED5mm, "blue")` |  LED 5 mm blue |
+|   1 | `led(LED8mm)` |  LED 8 mm red |
+
+### Printed
+| Qty | Filename |
+| ---:|:--- |
+|   1 | LED10mm_bezel.stl |
+|   1 | LED10mm_bezel_retainer.stl |
+|   1 | LED3mm_bezel.stl |
+|   1 | LED3mm_bezel_retainer.stl |
+|   1 | LED5mm_bezel.stl |
+|   1 | LED5mm_bezel_retainer.stl |
+|   1 | LED8mm_bezel.stl |
+|   1 | LED8mm_bezel_retainer.stl |
+
+### Assemblies
+| Qty | Name |
+| ---:|:--- |
+|   1 | LED10mm_orange_bezel_assembly |
+|   1 | LED3mm_yellow_bezel_assembly |
+|   1 | LED5mm_blue_bezel_assembly |
+|   1 | LED8mm_red_bezel_assembly |
+
+
 <a href="#top">Top</a>
 
 ---
@@ -5592,6 +5779,7 @@ It can also have printed feet on the base with the screws doubling up to hold th
 | `pbox_name(type)` | Name to allow more than one box in a project |
 | `pbox_radius(type)` | Internal corner radius |
 | `pbox_ridges(type)` | Ridge wavelength and amplitude |
+| `pbox_short_insert(type)` | Use short inserts |
 | `pbox_top(type)` | Top thickness |
 | `pbox_wall(type)` | Wall thickness |
 | `pbox_width(type)` | Internal width |
@@ -5599,7 +5787,7 @@ It can also have printed feet on the base with the screws doubling up to hold th
 ### Functions
 | Function | Description |
 |:--- |:--- |
-| `pbox(name, wall, top_t, base_t, radius, size, foot = false, screw = false, ridges = [0, 0])` | Construct a printed box property list |
+| `pbox(name, wall, top_t, base_t, radius, size, foot = false, screw = false, short_insert = false, ridges = [0, 0])` | Construct a printed box property list |
 | `pbox_inclusion(type)` | How far the ledge for the base extends inwards |
 | `pbox_insert(type)` | The insert for the base screws |
 | `pbox_screw(type)` | Foot screw if got feet else base_screw |
@@ -5623,8 +5811,8 @@ It can also have printed feet on the base with the screws doubling up to hold th
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   4 | `insert(F1BM2)` |  Heatfit insert M2 |
-|   4 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   4 | `insert(F1BM2)` |  Heatfit insert M2 x 4mm |
+|   4 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   4 | `screw(M2_cap_screw, 6)` |  Screw M2 cap x  6mm |
 |   3 | `screw(M3_pan_screw, 6)` |  Screw M3 pan x  6mm |
 |   4 | `screw(M3_pan_screw, 10)` |  Screw M3 pan x 10mm |
@@ -5753,7 +5941,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   6 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   6 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   6 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   6 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   6 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
@@ -5781,7 +5969,7 @@ The stl and assembly must be given a name and parameterless wrappers for the stl
 ## Ribbon_clamp
 Clamp for ribbon cable and polypropylene strip or one or more ribbon cables.
 
-* When `ways` is a scalar number the slot is sized for one rubbon cable and a PP strip.
+* When `ways` is a scalar number the slot is sized for one ribbon cable and a PP strip.
 * When `ways` is a two element vector the second element indicates the number of cables and the slot is size for just the cables.
 
 [printed/ribbon_clamp.scad](printed/ribbon_clamp.scad) Implementation.
@@ -5809,8 +5997,8 @@ Clamp for ribbon cable and polypropylene strip or one or more ribbon cables.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   2 | `insert(F1BM2)` |  Heatfit insert M2 |
-|   2 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   2 | `insert(F1BM2)` |  Heatfit insert M2 x 4mm |
+|   2 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   1 |  |  Ribbon cable 20 way 100mm |
 |   1 |  |  Ribbon cable 8 way 100mm |
 |   2 | `screw(M2_dome_screw, 8)` |  Screw M2 dome x  8mm |
@@ -5842,15 +6030,36 @@ Clamp for ribbon cable and polypropylene strip or one or more ribbon cables.
 ## Screw_knob
 Knob with embedded hex head screw.
 
+Most aspects can be customised, e.g. the flange thickness and radius. It can also be solid or just a wall and be wavey edged or fluted.
+
 [printed/screw_knob.scad](printed/screw_knob.scad) Implementation.
 
 [tests/screw_knob.scad](tests/screw_knob.scad) Code for this example.
 
+### Properties
+| Function | Description |
+|:--- |:--- |
+| `screw_knob_flange_r(type)` | The flange outside radius |
+| `screw_knob_flange_t(type)` | The thickness of the flange |
+| `screw_knob_fluted(type)` | Fluted instead of sine wave |
+| `screw_knob_screw(type)` | The hex screw |
+| `screw_knob_solid(type)` | Is the flange solid or just a wall |
+| `screw_knob_stem_h(type)` | The stem height below the flange |
+| `screw_knob_wall(type)` | Wall thickness |
+| `screw_knob_wave_amp(type)` | Wave amplitude |
+| `screw_knob_waves(type)` | Number of waves around the flange edge |
+
+### Functions
+| Function | Description |
+|:--- |:--- |
+| `knob_height(type)` | Total height of the knob |
+| `screw_knob(screw, wall = 2, stem_h = 6, flange_t = 4, flange_r = 9, solid = true, waves = 5, wave_amp = 2, fluted = false)` | Constructor |
+
 ### Modules
 | Module | Description |
 |:--- |:--- |
-| `screw_knob(screw)` | Generate the STL for a knob to fit the specified hex screw |
-| `screw_knob_assembly(screw, length)` | Assembly with the screw in place |
+| `screw_knob(type)` | Generate the STL for a knob to fit the specified hex screw |
+| `screw_knob_assembly(type, length)` | Assembly with the screw in place |
 
 ![screw_knob](tests/png/screw_knob.png)
 
@@ -5859,18 +6068,24 @@ Knob with embedded hex head screw.
 | ---:|:--- |:---|
 |   1 | `screw(M3_hex_screw, 16)` |  Screw M3 hex x 16mm |
 |   1 | `screw(M4_hex_screw, 16)` |  Screw M4 hex x 16mm |
+|   1 | `screw(M5_hex_screw, 16)` |  Screw M5 hex x 16mm |
+|   1 | `screw(M6_hex_screw, 16)` |  Screw M6 hex x 16mm |
 
 ### Printed
 | Qty | Filename |
 | ---:|:--- |
 |   1 | screw_knob_M30.stl |
 |   1 | screw_knob_M40.stl |
+|   1 | screw_knob_M50.stl |
+|   1 | screw_knob_M60.stl |
 
 ### Assemblies
 | Qty | Name |
 | ---:|:--- |
 |   1 | screw_knob_M30_16_assembly |
 |   1 | screw_knob_M40_16_assembly |
+|   1 | screw_knob_M50_16_assembly |
+|   1 | screw_knob_M60_16_assembly |
 
 
 <a href="#top">Top</a>
@@ -5901,7 +6116,7 @@ UK 13A socket and printed backbox with earth terminal for the panel it is mounte
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   4 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   4 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   1 | `mains_socket(Contactum)` |  Mains socket 13A |
 |   1 | `mains_socket(MKLOGIC)` |  Mains socket 13A, switched |
 |   2 | `nut(M3_nut, nyloc = true)` |  Nut M3 x 2.4mm nyloc |
@@ -5958,7 +6173,7 @@ The STL and assembly must be given a name and parameterless wrappers for the stl
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   4 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   4 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   4 | `screw(M3_cap_screw, 10)` |  Screw M3 cap x 10mm |
 |   4 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
 |   4 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
@@ -6020,7 +6235,7 @@ be fully customised by passing a list of properties.
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   2 | `insert(F1BM3)` |  Heatfit insert M3 |
+|   2 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
 |   2 | `screw(M3_pan_screw, 8)` |  Screw M3 pan x  8mm |
 |   2 | `washer(M3_penny_washer)` |  Washer penny  M3 x 12mm x 0.8mm |
 |   2 | `star_washer(M3_washer)` |  Washer star M3 x 0.5mm |
@@ -6064,6 +6279,10 @@ Annotation used in this documentation
 ## Bezier
 Bezier curves and function to get and adjust the length or minimum z point.
 
+`bezier_join()` joins two paths with a Bezier curve that starts tangential to the end of `path1` and ends tangential to the end of `path2`.
+To do this the outer control points are the path ends and the inner two control points are along the tangents to the path ends.
+The only degree of freedom is how far along those tangents, which are the `d` and optional `d2` parameters.
+
 [utils/bezier.scad](utils/bezier.scad) Implementation.
 
 [tests/bezier.scad](tests/bezier.scad) Code for this example.
@@ -6074,6 +6293,7 @@ Bezier curves and function to get and adjust the length or minimum z point.
 | `adjust_bezier_length(v, l, eps = 0.001, r1 = 1.0, r2 = 1.5, l1, l2)` | Adjust Bezier control points `v` to get the required curve length `l` |
 | `adjust_bezier_z(v, z, eps = 0.001, r1 = 1, r2 = 1.5, z1, z2)` | Adjust Bezier control points `v` to get the required minimum `z` |
 | `bezier(t, v)` | Returns a point at distance `t` [0 - 1] along the curve with control points `v` |
+| `bezier_join(path1, path2, d, d2 = undef)` | Join two paths with a Bezier curve, control points are the path ends are `d` and `d2` from the ends in the same direction. |
 | `bezier_length(v, delta = 0.01, t = 0, length = 0)` | Calculate the length of a Bezier curve from control points `v` |
 | `bezier_min_z(v, steps = 100, z = inf, i = 0)` | Calculate the minimum z coordinate of a Bezier curve from control points `v` |
 | `bezier_path(v, steps = 100)` | Returns a Bezier path from control points `v` with `steps` segments |
@@ -6171,7 +6391,7 @@ allows flexible positioning of the motors.
 |   2 | `pulley(GT2x20ob_pulley)` |  Pulley GT2OB 20 teeth |
 |   8 | `screw(M3_cap_screw, 20)` |  Screw M3 cap x 20mm |
 |   4 | `screw(M3_grub_screw, 6)` |  Screw M3 grub x  6mm |
-|   2 | `NEMA(NEMA17M)` |  Stepper motor NEMA17 x 40mm |
+|   2 | `NEMA(NEMA17_40)` |  Stepper motor NEMA17 x 40mm |
 
 
 <a href="#top">Top</a>
@@ -6364,6 +6584,7 @@ Maths utilities for manipulating vectors and matrices.
 | `map(v, func)` | make a new vector where the func function argument is applied to each element of the vector v |
 | `mapi(v, func)` | make a new vector where the func function argument is applied to each element of the vector v. The func will get the index number as first argument, and the element as second argument. |
 | `nearly_zero(x)` | True if x is close to zero |
+| `path_length(path, i = 0, length = 0)` | Calculated the length along a path |
 | `quadratic_real_roots(a, b, c)` | Returns real roots of a quadratic equation, biggest first. Returns empty list if no real roots |
 | `radians(degrees)` | Convert radians to degrees |
 | `reduce(v, func, unity)` | reduce a vector v to a single entity by applying the func function recursively to the reduced value so far and the next element, starting with unity as the initial reduced value |
@@ -6501,6 +6722,8 @@ Because the tangents need to be calculated to find the length these can be calcu
 | Function | Description |
 |:--- |:--- |
 | `circle_tangent(p1, p2)` | Compute the clockwise tangent between two circles represented as [x,y,r] |
+| `line_intersection(l0, l1)` | Return the point where two 2D lines intersect or undef if they don't. |
+| `offset(points, offset)` | Offset a 2D polygon, breaks for concave shapes and negative offsets if the offset is more than half the smallest feature size. |
 | `rounded_polygon(points, _tangents = undef)` | Return the rounded polygon from the point list, can pass the tangent list to save it being calculated |
 | `rounded_polygon_arcs(points, tangents)` | Compute the arcs at the points, for each point [angle, rotate_angle, length] |
 | `rounded_polygon_length(points, tangents)` | Calculate the length given the point list and the list of tangents computed by `rounded_polygon_tangents` |
@@ -6565,6 +6788,12 @@ Subsequent rotations use the minimum rotation method.
 The path can be open or closed. If closed sweep ensures that the start and end have the same rotation to line up.
 An additional twist around the path can be specified. If the path is closed this should be a multiple of 360.
 
+`rounded_path()` can be used to generate a path of lines connected by arcs, useful for wire runs, etc.
+The vertices specify where the the path would be without any rounding.
+Each vertex, apart from the first and the last, has an associated radius and the path shortcuts the vertex with an arc specified by the radius.
+
+`spiral_paths()` makes a list of new paths that spiral around a given path. It can be used to make twisted wires that follow a rounded_path, for example.
+
 [utils/sweep.scad](utils/sweep.scad) Implementation.
 
 [tests/sweep.scad](tests/sweep.scad) Code for this example.
@@ -6578,14 +6807,18 @@ An additional twist around the path can be specified. If the path is closed this
 | `cap(facets, segment = 0, end)` | Create the mesh for an end cap |
 | `circle_points(r = 1, z = 0, dir = -1)` | Generate the points of a circle, setting z makes a single turn spiral |
 | `helical_twist_per_segment(r, pitch, sides)` | Calculate the twist around Z that rotate_from_to() introduces |
-| `path_length(path, i = 0, length = 0)` | Calculated the length along a path |
 | `rectangle_points(w, h)` | Generate the points of a rectangle |
+| `rounded_path(path)` | Convert a rounded_path, consisting of a start coordinate, vertex / radius pairs and then an end coordinate, to a path of points for sweep. |
+| `rounded_path_vertices(path)` | Show the unrounded version of a rounded_path for debug |
+| `segmented_path(path, min_segment)` | Add points to a path to enforce a minimum segment length |
 | `skin_faces(points, npoints, facets, loop, offset = 0)` | Create the mesh for the swept volume without end caps |
+| `spiral_paths(path, n, r, twists, start_angle)` | Create a new paths which spiral around the given path. Use for making twisted cables |
 | `sweep(path, profile, loop = false, twist = 0)` | Generate the point list and face list of the swept volume |
 
 ### Modules
 | Module | Description |
 |:--- |:--- |
+| `show_path(path)` | Show a path using a chain of hulls for debugging, duplicate points are highlighted. |
 | `sweep(path, profile, loop = false, twist = 0, convexity = 1)` | Draw a polyhedron that is the swept volume |
 
 ![sweep](tests/png/sweep.png)
@@ -6705,7 +6938,7 @@ The `pose()` module allows assembly views in the readme to be posed differently
 |:--- |:--- |
 | `assembly(name, big = undef, ngb = false)` | Name an assembly that will appear on the BOM, there needs to a module named `<name>_assembly` to make it. `big` can force big or small assembly diagrams. |
 | `dxf(name)` | Name a dxf that will appear on the BOM, there needs to a module named `<name>_dxf` to make it |
-| `explode(d, explode_children = false, offset = [0,0,0])` | Explode children by specified Z distance or vector `d`, option to explode grand children |
+| `explode(d, explode_children = false, offset = [0,0,0], show_line = true)` | Explode children by specified Z distance or vector `d`, option to explode grand children |
 | `hidden()` | Make item invisible, except on the BOM |
 | `no_explode()` | Prevent children being exploded |
 | `no_pose()` | Force children not to be posed even if parent is |
@@ -6724,8 +6957,8 @@ The `pose()` module allows assembly views in the readme to be posed differently
 ### Vitamins
 | Qty | Module call | BOM entry |
 | ---:|:--- |:---|
-|   1 | `insert(F1BM3)` |  Heatfit insert M3 |
-|   1 | `widget(3)` |  Rivit like thing for 3mm sheets |
+|   1 | `insert(F1BM3)` |  Heatfit insert M3 x 5.8mm |
+|   1 | `widget(3)` |  Rivet like thing for 3mm sheets |
 |   1 | `screw(M3_cap_screw, 8)` |  Screw M3 cap x  8mm |
 |   1 | `sheet(PMMA3, 20, 20, 1)` |  Sheet acrylic 20mm x 20mm x 3mm |
 |   1 | `washer(M3_washer)` |  Washer  M3 x 7mm x 0.5mm |
@@ -6766,7 +6999,7 @@ Original version by Doug Moen on the OpenSCAD forum
 | Module | Description |
 |:--- |:--- |
 | `box(xmin, ymin, zmin, xmax, ymax, zmax)` | Construct a box given its bounds |
-| `clip(xmin = -inf, ymin = -inf, zmin = -inf, xmax = inf, ymax = inf, zmax = inf)` | Clip child to specified boundaries |
+| `clip(xmin = -inf, ymin = -inf, zmin = -inf, xmax = inf, ymax = inf, zmax = inf, convexity = 1)` | Clip child to specified boundaries |
 
 ![clip](tests/png/clip.png)
 
@@ -6777,6 +7010,7 @@ Original version by Doug Moen on the OpenSCAD forum
 <a name="Global"></a>
 ## Global
 Global constants, functions and modules. This file is used directly or indirectly in every scad file.
+See [global_defs.scad](../../global_defs.scad) for a list of global constants.
 
 [utils/core/global.scad](utils/core/global.scad) Implementation.
 
@@ -6789,6 +7023,7 @@ Global constants, functions and modules. This file is used directly or indirectl
 | `cm(x)` | cm to mm conversion |
 | `echoit(x)` | Echo expression and return it, useful for debugging |
 | `foot(x)` | Foot to mm conversion |
+| `grey(n)` | Generate a shade of grey to pass to color(). |
 | `in(list, x)` | Returns true if `x` is an element in the `list` |
 | `inch(x)` | Inch to mm conversion (For fractional inches, 'inch(1 + 7/8)' will work as expected.) |
 | `limit(x, min, max)` | Force x in range min <= x <= max |
@@ -6797,6 +7032,7 @@ Global constants, functions and modules. This file is used directly or indirectl
 | `no_point(str)` | Replace decimal point in string with 'p' |
 | `r2sides(r)` | Replicates the OpenSCAD logic to calculate the number of sides from the radius |
 | `r2sides4n(r)` | Round up the number of sides to a multiple of 4 to ensure points land on all axes |
+| `round_to_layer(z)` | Round up to a layer boundary using `layer_height0` for the first layer and `layer_height` for subsequent layers. |
 | `slice(list, start = 0, end = undef)` | Slice a list or string with Python type semantics |
 | `sqr(x)` | Returns the square of `x` |
 | `yard(x)` | Yard to mm conversion |

scripts/changelog.py

@@ -157,11 +157,11 @@ if __name__ == '__main__':
                         break
                     j += 1
 
-                # Print verson info
+                # Print version info
                 print('%s [%s](%s "show release") %s %s' % ('#' * (level + 1), ver, url + '/releases/tag/' + ver, type, diff), file = file)
 
             # Print commits excluding merges
 
-            if not c.comment.startswith('Merge branch') and not c.comment.startswith('Merge pull') and not re.match(r'U..ated chang.*log.*', c.comment):
+            if not c.comment.startswith('Merge branch') and not c.comment.startswith('Merge pull') and not re.match(r'U..ated ch.*log.*', c.comment):
                 print('* %s [`%s`](%s "show commit") %s %s\n' % (c.date, c.hash[:7], url + '/commit/' + c.hash, initials(c.author), fixup_comment(c.comment, url)), file = file)
     do_cmd(('codespell -w -L od ' + filename).split())

scripts/render.py

@@ -26,7 +26,7 @@ from set_config import *
 from exports import bom_to_parts
 import os
 import openscad
-from tests import do_cmd, update_image, colour_scheme, background
+from tests import do_cmd, update_image, colour_scheme, background, image_size
 from deps import mtime
 from colorama import init
 import json
@@ -95,7 +95,7 @@ def render(target, type):
             render = "--preview" if type == 'stl' or colour != pp1 else "--render"
             tmp_name = tmp_dir + '/' + part[:-4] + '.png'
             dummy_deps_name = tmp_dir + '/tmp.deps' # work around for OpenSCAD issue #3879
-            openscad.run("-o", tmp_name, png_maker_name, colour_scheme, "--projection=p", "--imgsize=4096,4096", cam, render, "--autocenter", "--viewall", "-d", dummy_deps_name)
+            openscad.run("-o", tmp_name, png_maker_name, colour_scheme, "--projection=p", image_size, cam, render, "--autocenter", "--viewall", "-d", dummy_deps_name)
             do_cmd(("magick "+ tmp_name + " -trim -resize 280x280 -background %s -gravity Center -extent 280x280 -bordercolor %s -border 10 %s"
                     % (background, background, tmp_name)).split())
             update_image(tmp_name, png_name)

scripts/set_config.py

@@ -57,13 +57,13 @@ def set_config(target, usage = None):
         sys.exit(1)
 
     if not targets:
-        print("Not a muli-configuration project (no config_<target>.scad files found)")
+        print("Not a multi-configuration project (no config_<target>.scad files found)")
         if usage:
             usage()
         sys.exit(1)
 
     if not target in targets:
-        print(target + " is not a configuration, avaliable configurations are: " + valid_targets_string())
+        print(target + " is not a configuration, available configurations are: " + valid_targets_string())
         if usage:
             usage()
         sys.exit(1)

scripts/tests.py

@@ -36,8 +36,7 @@ from blurb import *
 from colorama import Fore
 from tmpdir import *
 
-w = 4096
-h = w
+image_size = "--imgsize=4096,4096"
 threshold = 20  # Image comparison allowed number of different pixels
 fuzz = 5       # Image comparison allowed percentage error in pixel value
 
@@ -48,7 +47,12 @@ def do_cmd(cmd, output = sys.stdout):
     for arg in cmd:
         print(arg, end = " ")
     print()
-    return subprocess.call(cmd, stdout = output, stderr = output)
+    t = time.time()
+    rv = subprocess.call(cmd, stdout = output, stderr = output)
+    elapsed = time.time() - t
+    with open("cmd_times.txt", 'at') as f:
+        print(cmd[0], cmd[-1], elapsed, file = f)
+    return rv
 
 def compare_images(a, b, c):
     if not os.path.isfile(b):
@@ -119,7 +123,7 @@ def tests(tests):
         libtest = True
         lib_blurb = scrape_blurb(scad_name)
         if not os.path.isfile(png_name):
-            openscad.run(scad_name, "-o", png_name, colour_scheme, "--projection=p", "--imgsize=%d,%d" % (w, h), "--camera=0,0,0,50,0,340,500", "--autocenter", "--viewall");
+            openscad.run(scad_name, "-o", png_name, colour_scheme, "--projection=p", image_size, "--camera=0,0,0,50,0,340,500", "--autocenter", "--viewall");
             do_cmd(["magick", png_name, "-trim", "-resize", "1280", "-bordercolor", background, "-border", "10", png_name])
     else:
         #
@@ -240,7 +244,7 @@ def tests(tests):
                 print(changed)
                 t = time.time()
                 tmp_name = tmp_dir + '/tmp.png'
-                openscad.run_list([scad_name, "-o", tmp_name] + options.list() + ["-D$bom=2", colour_scheme, "--projection=p", "--imgsize=%d,%d" % (w, h), "--camera=0,0,0,70,0,315,500", "--autocenter", "--viewall", "-d", dname]);
+                openscad.run_list([scad_name, "-o", tmp_name] + options.list() + ["-D$bom=2", colour_scheme, "--projection=p", image_size, "--camera=0,0,0,70,0,315,500", "--autocenter", "--viewall", "-d", dname]);
                 times.add_time(scad_name, t)
                 do_cmd(["magick", tmp_name, "-trim", "-resize", "1000x600", "-bordercolor", background, "-border", "10", tmp_name])
                 update_image(tmp_name, png_name)

scripts/views.py

@@ -25,7 +25,7 @@
 from __future__ import print_function
 from set_config import *
 import openscad
-from tests import do_cmd, update_image, colour_scheme, background
+from tests import do_cmd, update_image, colour_scheme, background, image_size
 import time
 import times
 import options
@@ -223,7 +223,7 @@ def views(target, do_assemblies = None):
                                                 target_def = ['-D$target="%s"' % target] if target else []
                                                 cwd_def = ['-D$cwd="%s"' % os.getcwd().replace('\\', '/')]
                                                 view_def = ['--viewall', '--autocenter'] if not (zoomed & (1 << explode)) else ['--camera=0,0,0,55,0,25,140']
-                                                openscad.run_list(["-o", tmp_name, png_maker_name] + options.list() + target_def + cwd_def + view_def + ["-D$pose=1", "-D$explode=%d" % explode, colour_scheme, "--projection=p", "--imgsize=4096,4096", "-d", dname]);
+                                                openscad.run_list(["-o", tmp_name, png_maker_name] + options.list() + target_def + cwd_def + view_def + ["-D$pose=1", "-D$explode=%d" % explode, colour_scheme, "--projection=p", image_size, "-d", dname]);
                                                 times.add_time(png_name, t)
                                                 do_cmd(["magick", tmp_name, "-trim", "-resize", "1004x1004", "-bordercolor", background, "-border", "10", tmp_name])
                                                 update_image(tmp_name, png_name)
@@ -422,7 +422,7 @@ def views(target, do_assemblies = None):
     times.add_time(html_name, t)
     times.print_times(pngs + [html_name])
     #
-    # Make the printme.html by replacing empty spans that invisbly mark the page breaks by page break divs.
+    # Make the printme.html by replacing empty spans that invisibly mark the page breaks by page break divs.
     #
     with open(html_name, 'rt') as src:
         lines = src.readlines()

tests/BOM.scad

@@ -32,7 +32,7 @@ height = 10;
 insert = screw_insert(screw);
 
 module widget(thickness) {
-    vitamin(str("widget(", thickness, "): Rivit like thing for ", thickness, "mm sheets"));
+    vitamin(str("widget(", thickness, "): Rivet like thing for ", thickness, "mm sheets"));
     t = 1;
     color("silver") {
         cylinder(d = 3, h = thickness + 2 * eps, center = true);
@@ -85,7 +85,7 @@ assembly("widget_top") {
 module widget_assembly()
 assembly("widget") {
 
-    widget_base_assembly();                 // Note this is not exloded because it is sub-assembly
+    widget_base_assembly();                 // Note this is not exploded because it is sub-assembly
 
     translate_z(height) {
         translate_z(sheet_thickness(sheet))

tests/LED_bezel.scad

@@ -0,0 +1,37 @@
+//
+// NopSCADlib Copyright Chris Palmer 2018
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+include <../core.scad>
+use <../utils/layout.scad>
+
+include <../vitamins/leds.scad>
+use <../printed/led_bezel.scad>
+
+module led_bezels()
+    layout([for(l = LEDs) led_diameter(l)], 6) let(l = LEDs[$i], b = led_bezel(l))
+        if($preview)
+            led_bezel_fastened_assembly(b, 3, ["yellow", "blue", "red", "orange"][$i % 4]);
+        else {
+            led_bezel(b);
+
+            translate([0, -20])
+                led_bezel_retainer(b);
+        }
+
+
+led_bezels();

tests/LEDs.scad

@@ -23,7 +23,7 @@ include <../vitamins/leds.scad>
 
 module leds()
     layout([for(l = LEDs) led_diameter(l)], 5)
-        led(LEDs[$i], ["green", "blue", "red"][$i % 3]);
+        led(LEDs[$i], ["green", "blue", "red", "orange"][$i % 4]);
 
 if($preview)
     leds();

tests/PCB.scad

@@ -59,8 +59,9 @@ test_pcb = ["test_pcb", "Test PCB",
     [ [3, 3], [3, -3], [-3, 3], [-3, -3] ],
     // components
     [
-        [ 20, -5, 180, "trimpot10"],
+        [ 20, -5,  180, "trimpot10"],
         [ 20, -15,  90, "trimpot10", true],
+        [  7,  2,   90, "smd_led", LED1206, "blue"],
         [ 10,  2,   90, "smd_led", LED0805, "red"],
         [ 13,  2,   90, "smd_led", LED0603, "orange"],
         [ 16,  2,   90, "smd_res", RES1206, "1K"],
@@ -69,6 +70,8 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 25,  2,   90, "smd_cap", CAP1206, 1.5],
         [ 28,  2,   90, "smd_cap", CAP0805, 1.0],
         [ 31,  2,   90, "smd_cap", CAP0603, 0.7],
+        [ 16,  6,  -90, "smd_sot", SOT23, "2N7000"],
+        [ 28,  20, -90, "smd_sot", SOT223, "LM117"],
 
         [ 10,  10,   0, "2p54header", 4, 1],
         [ 25,  10,   0, "2p54header", 5, 1, false, "blue" ],
@@ -83,15 +86,18 @@ test_pcb = ["test_pcb", "Test PCB",
         [  8, 105, 180, "usb_Ax2"],
         [  7,  85, 180, "molex_usb_Ax1"],
         [ 8.5,125, 180, "molex_usb_Ax2"],
-        [  3, 140, 180, "usb_uA"],
-        [  8, 155, 180, "usb_B"],
+        [  3, 138, 180, "usb_uA"],
+        [ 4.6,148, 180, "usb_miniA"],
+        [ 3.7,158, 180, "usb_C"],
+        [  8, 170, 180, "usb_B"],
+        [  6, 184, 180, "uSD", [12, 11.5, 1.4]],
+        [  8, 196, 180, "jack"],
+        [  6, 206, 180, "barrel_jack"],
+        [  5, 220, 180, "hdmi"],
+        [  3, 235, 180, "mini_hdmi"],
+        [ 38, 190, -90, "text", 25, 4, "Silkscreen", "Liberation Sans:style=Bold"],
         [ 25, 200,   0, "buzzer", 4.5, 8.5],
         [ 25, 218,   0, "buzzer"],
-        [  8, 190, 180, "jack"],
-        [  6, 200, 180, "barrel_jack"],
-        [  5, 218, 180, "hdmi"],
-        [  3, 235, 180, "mini_hdmi"],
-        [  6, 175, 180, "uSD", [12, 11.5, 1.4]],
 
         [ 65,   9,   0, "link", inch(0.4)],
         [ 65,  12,   0, "ax_res", res1_8, 1000],
@@ -99,6 +105,7 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 65,  22,   0, "ax_res", res1_2, 100000],
         [ 55,  22,   0, "vero_pin"],
         [ 55,  17,   0, "vero_pin", true],
+        [ 55,   9,   0, "link", 0, 5],
 
         [ 80,   9,   0, "link", inch(0.2), inch(0.4)],
         [ 80,  12,   0, "ax_res", res1_8, 1000000, 1, inch(0.1)],
@@ -108,7 +115,6 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 60,   3,   0, "flex"],
         [ 50,  15, -90, "flat_flex"],
         [ 40,  15, -90, "flat_flex", true],
-        [ 60,  35,   0, "D_plug", DCONN9],
 
         [ 50,  50,   0, "molex_hdr", 2],
         [ 50,  60,   0, "jst_xh", 2],
@@ -133,8 +139,11 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 55, 170,   0, "button_4p5mm"],
         [ 50, 185,   0, "microswitch", small_microswitch],
         [ 52, 200,   0, "pcb", 11, TMC2130 ],
-        [ 80, 200,   0, "pdip", 24, "27C32", true, inch(0.6) ],
-        [ 80, 170,   0, "pdip", 8, "NE555" ],
+        [ 80, 210,   0, "pdip", 24, "27C32", true, inch(0.6) ],
+        [ 80, 180,   0, "pdip", 8, "NE555" ],
+        [ 80, 166, -90, "smd_soic", SOIC18, "PIC18F88"],
+        [ 71, 166, -90, "smd_soic", SOIC16, "ICL323"],
+        [ 64, 166, -90, "smd_soic", SOIC8, "M34063"],
         [ 80, 150,   0, "chip", 10, 5, 1, grey(20)],
 
         [ 52, 206,   0, "2p54socket", 8, 1 ],
@@ -142,7 +151,8 @@ test_pcb = ["test_pcb", "Test PCB",
         [ 50, 220,   0, "standoff",  5, 4.5, 12.5, 2.54],
         [ 50, 240,   0, "potentiometer"],
         [ 75, 240,   0, "potentiometer", KY_040_encoder, 8],
-        [ 30,  85,   -90, "7seg", WT5011BSR, 2],
+        [ 30,  85, -90, "7seg", WT5011BSR, 2],
+        [ 30, 55, -90, "D_plug", DCONN9],
     ],
     // accessories
     []

tests/SMDs.scad

@@ -33,6 +33,17 @@ module smds() {
         layout([for(c = smd_capacitors) smd_cap_size(c).x], 1)
             let(c = smd_capacitors[$i])
                 smd_capacitor(c, smd_cap_size(c).y * 0.8);
+
+    translate([0, 12])
+        layout([for(s = smd_sots) smd_sot_size(s).x], 1)
+            let(s = smd_sots[$i])
+                smd_sot(s, ["2N7000", "FZT851"][$i]);
+
+    translate([0, 20])
+        layout([for(s = smd_soics) smd_soic_size(s).x], 1)
+            let(s = smd_soics[$i])
+                smd_soic(s, s[0]);
+
 }
 
 if($preview)

tests/axials.scad

@@ -28,6 +28,9 @@ module axials() {
         rotate(90)
             wire_link(0.8, inch(0.4));
 
+    pcb_grid(pcb, 0, 7)
+        wire_link(0.8, 0, 5);
+
     for(i = [0 : len(ax_resistors) - 1]) {
         pcb_grid(pcb, 2 * i + 2, 1 + [0, 0.5, 1.5][i])
             rotate(90)

tests/bezier.scad

@@ -77,6 +77,17 @@ module beziers() {
 
     translate(control_points[1] - [0, 0, 2])
         label(str("bezier_length = ", length, ", bezier_min_z = ", bezier_min_z(curve)), valign = "top");
+
+    path1 = [[20, 20,  0], [40, 20, 0]];
+    path2 = [[70, 40, -5], [60, 40, 0]];
+
+    color("green")
+        for(p = concat(path1, path2))
+            translate(p)
+                sphere(1);
+
+    color("orange")
+        sweep(bezier_join(path1, path2, 10), circle_points(0.5, $fn = 64));
 }
 
 if($preview)

tests/cable_clip.scad

@@ -0,0 +1,59 @@
+//
+// NopSCADlib Copyright Chris Palmer 2022
+// nop.head@gmail.com
+// hydraraptor.blogspot.com
+//
+// This file is part of NopSCADlib.
+//
+// NopSCADlib is free software: you can redistribute it and/or modify it under the terms of the
+// GNU General Public License as published by the Free Software Foundation, either version 3 of
+// the License, or (at your option) any later version.
+//
+// NopSCADlib is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU General Public License for more details.
+//
+// You should have received a copy of the GNU General Public License along with NopSCADlib.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+
+include <../core.scad>
+use <../printed/cable_clip.scad>
+use <../vitamins/wire.scad>
+
+
+sheet_thickness = 3;
+
+cables = [
+    for(i = [1 : 6]) [i, 1.4], [1, 6], 0, [10, inch(0.05), true], 0
+];
+
+screw = M3_dome_screw;
+
+
+module cable_clips() {
+    for(i = [0 : ceil(len(cables) / 2) - 1])
+        translate([i * 25, 0]) {
+            cable1 = cables[2 * i];
+            cable2 = cables[2 * i + 1];
+
+            if($preview) {
+                cable_clip_assembly(screw, sheet_thickness, cable1, cable2);
+
+                for(j = [0 : 1])
+                    let(cable = cables[2 * i + j])
+                        if(cable)
+                            let(positions = cable_bundle_positions(cable))
+                                for(i = [0 : len(positions) - 1])
+                                    let(p = positions[i])
+                                        translate([p.x + [-1, 1][j] * cable_clip_offset(screw, cable), 0, p.y])
+                                            rotate([90, 0, 0])
+                                                color([grey(20), "blue", "red", "orange", "yellow", "green", "brown", "purple", "grey", "white"][i])
+                                                    cylinder(d = cable_wire_size(cable), h = 30, center = true);
+            }
+            else
+                cable_clip(screw, cable1, cable2);
+        }
+}
+
+cable_clips();

tests/core_xy.scad

@@ -55,7 +55,7 @@ module coreXY_belts_test() {
     translate([coreXYPosBL.x + separation.x/2, coreXYPosTR.y + upper_drive_pulley_offset.y, separation.z/2]) {
         // add the upper drive pulley stepper motor
         translate([coreXY_drive_pulley_x_alignment(coreXY_type) + upper_drive_pulley_offset.x, 0, -pulley_height(coreXY_drive_pulley(coreXY_type))])
-            NEMA(NEMA17M);
+            NEMA(NEMA17_40);
 
         // add the screws for the upper drive offset idler pulleys if required
         if (upper_drive_pulley_offset.x > 0) {
@@ -78,7 +78,7 @@ module coreXY_belts_test() {
     translate([coreXYPosTR.x - separation.x/2, coreXYPosTR.y + lower_drive_pulley_offset.y, -separation.z/2]) {
         // add the lower drive pulley stepper motor
         translate([-coreXY_drive_pulley_x_alignment(coreXY_type) + lower_drive_pulley_offset.x, 0, -pulley_height(coreXY_drive_pulley(coreXY_type))])
-            NEMA(NEMA17M);
+            NEMA(NEMA17_40);
 
         // add the screws for the lower drive offset idler pulleys if required
         if (lower_drive_pulley_offset.x < 0) {

tests/inserts.scad

@@ -24,9 +24,15 @@ include <../vitamins/inserts.scad>
 module inserts() {
 
     for(i = [0: len(inserts) -1])
-        translate([10 * i, 0])
+        translate([10 * i, 5])
             insert(inserts[i]);
 
+    for(i = [0: len(short_inserts) -1])
+        translate([10 * i, -5])
+            insert(short_inserts[i]);
+
+
+
     stl_colour(pp1_colour)
         translate([len(inserts) * 10, 0]) {
             insert_lug(inserts[0], 2, 1);

tests/leadnuts.scad

@@ -25,6 +25,26 @@ module leadnuts()
     layout([for(n = leadnuts) leadnut_flange_dia(n)], 5)
         leadnut(leadnuts[$i]);
 
+module leadnuthousings()
+    layout([for(n = leadnuthousings) leadnuthousing_width(n)], 5) {
+        rotate([0,0,270]) {
+            leadnuthousing(leadnuthousings[$i]);
+            explode(15)
+                leadnuthousing_nut_position(leadnuthousings[$i])
+                    leadnut(leadnuthousing_nut(leadnuthousings[$i]));
+            explode(17 + leadnuthousing_nut_screw_length(leadnuthousings[$i]))
+                translate_z(leadnuthousing_height(leadnuthousings[$i])/2)
+                    leadnuthousing_nut_screw_positions(leadnuthousings[$i])
+                        screw(leadnut_screw(
+                            leadnuthousing_nut(leadnuthousings[$i])),
+                            leadnuthousing_nut_screw_length(leadnuthousings[$i])
+                        );
+        }
+    }
+
 if($preview)
-    let($show_threads = true)
+    let($show_threads = true) {
         leadnuts();
+        translate([0,50,0])
+            leadnuthousings();
+    }